Scribd
Upload
58 views2 pages

(FAQ ID: 78) How Do I Configure The Basic Wireless Settings For My TP-LINK Wireless Router?

To configure the basic wireless settings on a TP-LINK wireless router: 1. Log into the router's web interface using the default IP address of 192.168.1.1 and password of "admin". 2. Navigate to the Wireless Settings page and configure the SSID, region, channel, and mode. 3. Click Save to save the new wireless settings.

Uploaded by

briggs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
58 views2 pages

(FAQ ID: 78) How Do I Configure The Basic Wireless Settings For My TP-LINK Wireless Router?

To configure the basic wireless settings on a TP-LINK wireless router: 1. Log into the router's web interface using the default IP address of 192.168.1.1 and password of "admin". 2. Navigate to the Wireless Settings page and configure the SSID, region, channel, and mode. 3. Click Save to save the new wireless settings.

Uploaded by

briggs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

[FAQ ID: 78]How do I configure the basic

wireless settings for my TP-LINK Wireless


Router?
Suitable for: 54Mbps Wireless G Routers
Step 1 Open the web browser and type the IP address of the router (default
is 192.168.1.1) into the address bar and then Press Enter.
Step 2 Type the username and password in the login page, the default
username and password both are admin.
Step 3 Click Wireless->Wireless Settings on the left side to open the
wireless setting page.

Step 4 Configure the wireless settings.


SSIDType a name for your wireless network.
RegionSelect the correct region which is for your area/country.
ChannelSelect the wireless radio channel for your wireless network.
ModeSelect the working mode(802.11 b/g).
Enable Wireless Router Radio/Enable SSID BroadcastThese two
option are enabled usually.
Enable Wireless SecurityIf you dont want to secure your wireless
network, please dont enable this option.
Step 5 Click Save button to save the settings
Note
1. If there are too many wireless networks nearby, please change the
channel to another one to get a better signal.
2. Only when your wireless adapter support Super G technology, the Mode
can be change to 108Mbps Static (802.11g).
3. If you want to secure your wireless network, you can refer to our other
articles.

You might also like