Packet Tracer - Connecting a Wired and Wireless LAN Topology
Addressing Table
Device
Interface
IP Address
Connects To
Eth6
N/A
Fa0/0
Coax7
N/A
Port0
Port0
N/A
Coax7
Port1
N/A
Internet
Console
N/A
RS232
Fa0/0
192.168.2.1/24
Eth6
Fa0/1
10.0.0.1/24
Fa0
Ser0/0/0
172.31.0.1/24
Ser0/0
Ser0/0
172.31.0.2/24
Ser0/0/0
Fa1/0
172.16.0.1/24
Fa0/1
Internet
192.168.2.2/24
Port 1
Eth1
192.168.1.1
Fa0
Family PC
Fa0
192.168.1.102
Eth1
Switch
Fa0/1
172.16.0.2
Fa1/0
Netacad.pka
Fa0
10.0.0.254
Fa0/1
Configuration Terminal
RS232
N/A
Console
Cloud
Cable Modem
Router0
Router1
WirelessRouter
Objectives
Part 1: Connect to the Cloud
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 5
Packet Tracer - Connecting a Wired and Wireless LAN
Part 2: Connect Router0
Part 3: Connect Remaining Devices
Part 4: Verify Connections
Part 5: Examine the Physical Topology
Background
When working in Packet Tracer (a lab environment or a corporate setting), you should know how to select the
appropriate cable and how to properly connect devices. This activity will examine device configurations in
Packet Tracer, selecting the proper cable based on the configuration, and connecting the devices. This activity
will also explore the physical view of the network in Packet Tracer.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 5
Packet Tracer - Connecting a Wired and Wireless LAN
Part 1: Connect to the Cloud
Step 1: Connect the cloud to Router0.
a. At the bottom left, click the orange lightning icon to open the available Connections.
b. Choose the correct cable to connect Router0 Fa0/0 to Cloud Eth6. Cloud is a type of switch, so use a
Copper Straight-Through connection. If you attached the correct cable, the link lights on the cable turn
green.
Step 2: Connect the cloud to Cable Modem.
Choose the correct cable to connect Cloud Coax7 to Modem Port0.
If you attached the correct cable, the link lights on the cable turn green.
Part 2: Connect Router0
Step 1: Connect Router0 to Router1.
Choose the correct cable to connect Router0 Ser0/0/0 to Router1 Ser0/0. Use one of the available Serial
cables.
If you attached the correct cable, the link lights on the cable turn green.
Step 2: Connect Router0 to netacad.pka.
Choose the correct cable to connect Router0 Fa0/1 to netacad.pka Fa0. Routers and computers traditionally
use the same wires to transmit (1 and 2) and receive (3 and 6). The correct cable to choose consists of these
crossed wires. Although many NICs can now autosense which pair is used to transmit and receive, Router0
and netacad.pka do not have autosensing NICs.
If you attached the correct cable, the link lights on the cable turn green.
Step 3: Connect Router0 to the Configuration Terminal.
Choose the correct cable to connect Router0 Console to Configuration Terminal RS232. This cable does
not provide network access to Configuration Terminal, but allows you to configure Router0 through its
terminal.
If you attached the correct cable, the link lights on the cable turn black.
Part 3: Connect Remaining Devices
Step 1: Connect Router1 to Switch.
Choose the correct cable to connect Router1 Fa1/0 to Switch Fa0/1.
If you attached the correct cable, the link lights on the cable turn green. Allow a few seconds for the light to
transition from amber to green.
Step 2: Connect Cable Modem to Wireless Router.
Choose the correct cable to connect Modem Port1 to Wireless Router Internet port.
If you attached the correct cable, the link lights on the cable will turn green.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 3 of 5
Packet Tracer - Connecting a Wired and Wireless LAN
Step 3: Connect Wireless Router to Family PC.
Choose the correct cable to connect Wireless Router Ethernet 1 to Family PC.
If you attached the correct cable, the link lights on the cable turn green.
Part 4: Verify Connections
Step 1: Test the connection from Family PC to netacad.pka.
c.
Open the Family PC command prompt and ping netacad.pka.
d. Open the Web Browser and the web address http://netacad.pka.
Step 2: Ping the Switch from Home PC.
Open the Home PC command prompt and ping the Switch IP address of to verify the connection.
Step 3: Open Router0 from Configuration Terminal.
e. Open the Terminal of Configuration Terminal and accept the default settings.
f.
Press Enter to view the Router0 command prompt.
g. Type show ip interface brief to view interface statuses.
Part 5: Examine the Physical Topology
Step 1: Examine the Cloud.
h. Click the Physical Workspace tab or press Shift+P and Shift+L to toggle between the logical and
physical workspaces.
i.
Click the Home City icon.
j.
Click the Cloud icon. How many wires are connected to the switch in the blue rack?
k.
Click Back to return to Home City.
2
Step 2: Examine the Primary Network.
l.
Click the Primary Network icon. Hold the mouse pointer over the various cables. What is located on the
table to the right of the blue rack?
Configuration terminal
m. Click Back to return to Home City.
Step 3: Examine the Secondary Network.
n. Click the Secondary Network icon. Hold the mouse pointer over the various cables. Why are there two
orange cables connected to each device?
Because in the switch the destination is the router and vice versa.
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 4 of 5
Packet Tracer - Connecting a Wired and Wireless LAN
Step 4: Examine the Home Network.
o. Why is there an oval mesh covering the home network?
Because it indicates that the network is connected wirelessly.
p. Click the Home Network icon. Why is there no rack to hold the equipment?
Because racks are used for the servers equipment.
a. Click the Logical Workspace tab to return to the logical topology.
Suggested Scoring Rubric
Activity Section
Part 5: Examine the
Physical Topology
Question
Location
Possible
Points
Step 1c
Step 2a
Step 3a
Step 4a
Step 4b
Part 5 Total
20
Packet Tracer Score
80
Total Score
100
2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Earned
Points
Page 5 of 5
