Scribd
Upload
1K views1 page

Long Term Deflection Design

This document summarizes the long term deflection calculation for a floor slab with a width of 93 cm and bottom and top reinforcement of Ø32 bars spaced at 12.5 cm and 25 cm respectively. It calculates the instantaneous and long term deflections under sustained and intermittent live loads, finding a total long term deflection of 22.7 mm. It also calculates the maximum crack width of 0.03 mm.

Uploaded by

klynchelle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views1 page

Long Term Deflection Design

This document summarizes the long term deflection calculation for a floor slab with a width of 93 cm and bottom and top reinforcement of Ø32 bars spaced at 12.5 cm and 25 cm respectively. It calculates the instantaneous and long term deflections under sustained and intermittent live loads, finding a total long term deflection of 22.7 mm. It also calculates the maximum crack width of 0.03 mm.

Uploaded by

klynchelle
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project

Calculated by
AA
Checked and Approved by
MN

Client
Floor title

LONG TERM DEFLECTION CALCULATION


ACI
Width
318-08 Service moments
MaMa+
9.5.2.5 x
9.5.2.5
Sustained live load

93

40

cm

-130

t.m

Instantanuous deflections
DL
8.9 mm

93

t.m

LL

5 years or more

-130

-130

Time dependent factor for sustained load

0.97
20 %
80 %
Midspan

2.7 mm

MOMENT
(ton.m)

Percentage of sustained live load for p


Percentage of intermittent load

cm

cm

Bottom Reinforcement

32 @

12.5 +

32 @

Top Reinforcement

32 @

25 +

32 @

cm2

13 Asbot =
25 Astop =

Support

128.6
64.3

cm

32 @ 12.5 +
32 @

25 +

cm
cm2
32 @ 12.5 Asbot = 128.6
32 @
25 Astop =
64.3

cm2

Concrete cover

80

cm2

Section depth

d
f'c

76
32

cm2
Mpa

Effective depth of section


Concrete compressive strength

8.5.1

Ec

265.8721

ton/cm2

Elastic modulus of concrete

8.5.2

Es
n

2000
8

ton/cm2

Elastic modulus of steel


Modular ratio

Es/Ec

9.5.2.3 fr

'

35.0725
0.042307
0.021154

kg/cm2

Modulus of rupture

0.62f'c

Ig
At midspan
k
j
Icr
9.5.2.3 Mcr
9.5.2.3 Ie
Ie,average
Additional deflection
DL,long term
LL,long term Sustained
Total deflection

1706667

4700f'c

Moment of inertia about centroidal axis neglecting reinforcement

0.540695
0.819768

cm4
At support
0.42703
0.85766

Compression members eff. length factor


Internal lever arm

[(n)2+2..n]-.n
1-k/3

2104100
14.96427

1373072 cm4
14.9643 t.m

Moment of inertia of cracked section


Cracking moment

n.As.(1-k).j.d2
(fr.Ig)/yt

2102444

1373580 cm4

Effective moment of inertia

Icr+(Mcr/Ma)3.(Ig-Icr)

1738012

cm4

mm
0.515396 + LL,Long term intermittent
22.7
mm

.(Ig/Ie).DL

8.494486

2.121 mm

Deflection
-2.7 (mm)
DL
-8.9

LL
Long term

-22.7

CRACK WIDTH CALCULATION


fs
dc
cc

1.16
4
2.4

1.124
6.25

Frosch w

0.03

ton/cm2
cm

mm

Tensile stress in reinforcement at service loads

M/(As.j.d)

Concrete cover to center of outer bar


Least distance from reinf. Surface to tenion face

dc-db/2

Bar spacing closest to tension face

1+0.031.dc (cm)
380.(280/fs)-2.5.cc

Maximum width of crack

2(fs/Es)..(dc2+(s/2)2)

You might also like