Scribd
Upload
127 views2 pages

MG90S Tower Pro

This tiny, lightweight servo has metal gears and high output power, making it suitable for use in small spaces like RC aircraft, helicopters, and robots. While it can rotate approximately 180 degrees like standard servos, it is much smaller in size. It comes with metal gears for strength and durability, along with three horns and hardware, and can be controlled using standard servo codes and libraries.

Uploaded by

bmsantivañez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views2 pages

MG90S Tower Pro

This tiny, lightweight servo has metal gears and high output power, making it suitable for use in small spaces like RC aircraft, helicopters, and robots. While it can rotate approximately 180 degrees like standard servos, it is much smaller in size. It comes with metal gears for strength and durability, along with three horns and hardware, and can be controlled using standard servo codes and libraries.

Uploaded by

bmsantivañez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MG90S servo, Metal gear with one bearing

Tiny and lightweight with high output power, this tiny servo iiss perfect for RC Airplane,
Helicopter,, Quadcopter or Robot. This servo has metal gears forr added strength and
durability.
Servo
ervo can rotate approximately 180 degrees (90 in each direction), and works just like the
standard kinds but smaller.. You can use any servo code, hardware or library to control these
servos. Good for beginners who want to make stuff move without building a motor controller
with feedback & gear box, especially si
since it will fit in small places. It comes
omes with a 3 horns
(arms) and hardware.

Specifications

Weight: 13.4 g
Dimension: 22.5 x 12 x 35.5 mm approx.
Stall torque: 1.8 kgfcm (4.8V )), 2.2 kgfcm (6 V)
Operating speed: 0.1 s/60 degree (4.8 V), 0.08 s/60 degree (6 V)
Operating voltage: 4.8 V - 6.0 V
Dead band width: 5 s

Position "0" (1.5 ms pulse) is middle, "90" (~2 ms pulse) is all the way to the right, "-90"
"
(~1
ms pulse) is all the way to the left.

You might also like