Scribd
Upload
66 views1 page

Proposed Residential Development: No. 418, R.A. de Mel Mawatha, Colombo 03

The document provides details on welds for a proposed residential development, including weld symbols and details. It specifies weld thicknesses of 6mm, 15mm, and over 15mm. It notes that post-pouring strip details are included and marks the drawing as a construction issue. The drawing was created by Mahesh Lal and checked by DH/TP and SH/PM, and is intended for AVIC International Hotels Lanka Ltd.

Uploaded by

Vasanthapragash Nadarajha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views1 page

Proposed Residential Development: No. 418, R.A. de Mel Mawatha, Colombo 03

The document provides details on welds for a proposed residential development, including weld symbols and details. It specifies weld thicknesses of 6mm, 15mm, and over 15mm. It notes that post-pouring strip details are included and marks the drawing as a construction issue. The drawing was created by Mahesh Lal and checked by DH/TP and SH/PM, and is intended for AVIC International Hotels Lanka Ltd.

Uploaded by

Vasanthapragash Nadarajha
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WELDS

SYMBOL

DETAIL

SYMBOL

DETAIL

e 6

e 15

e>15

NOTE

PROPOSED RESIDENTIAL DEVELOPMENT


NO. 418, R.A. DE MEL MAWATHA, COLOMBO 03.
R01
R00
No

POST-POURING STRIP NOTES INCLUDED


CONSTRUCTION ISSUE
Revision Note: * indicates signatures on original issue of drawing or last revision of drawing

Mahesh
Lal
Drawn

DH / TP
DH / TP
Chkd.

SH / PM
SH / PM
Appd.

29.10.2014
29.10.2014
Date

FOR

AVIC INTERNATIONAL HOTELS LANKA LTD.


NO. 7/7, HYDE PARK CORNER, COLOMBO 02.

64, BARNES PLACE, COLOMBO-07,


SRI LANKA.
T +94714216681 F +94718802859
E mail - [email protected] Web - www.csec.lk

CHECK ALL DIMENSIONS ON SITE


PRIOR TO CONSTRUCTION. DO NOT
SCALE FROM DRAWING. REPORT ANY
DISCREPANCIES. IF IN DOUBT ASK.
COPYRIGHT AND AUTHORITY FOR
ANY REPRODUCTION OF DESIGN
SHOWN HERE IS RETAINED. DO NOT
KEEP SUPERSEDED DRAWINGS ON
SITE.

e>12mm

EQUAL PLATE THICKNESS

e>12mm

DIFFERENT PLATE THICKNESS

Drawn : Lal Sumanarathna

Designed: Eng. Shiromal Fernando

Project

Drafting:
DH / TP
Check

Design:
Check

Title

Prof. Priyan Mendis

Date: 19.01.2015
Scale - As Given

This Drawing must not be


used for Construction
unless signed as Approved

Original Size

A1

121055-S02

You might also like