Scribd
Upload
17 views24 pages

Oneway Slab

This document provides the design of a one-way slab for a project. The slab has a long span of 9.2m and short span of 3.35m. It is 150mm thick reinforced concrete slab with reinforcement diameter of 8mm. The required effective depth is 62.72mm. The main reinforcement spacing is 175mm centre to centre and secondary is 200mm centre to centre. Checks are performed to ensure the slab design meets requirements for bending moment, shear, deflection and percentage of reinforcement. The design is found to be satisfactory and safe.

Uploaded by

Wanda Beasley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
17 views24 pages

Oneway Slab

This document provides the design of a one-way slab for a project. The slab has a long span of 9.2m and short span of 3.35m. It is 150mm thick reinforced concrete slab with reinforcement diameter of 8mm. The required effective depth is 62.72mm. The main reinforcement spacing is 175mm centre to centre and secondary is 200mm centre to centre. Checks are performed to ensure the slab design meets requirements for bending moment, shear, deflection and percentage of reinforcement. The design is found to be satisfactory and safe.

Uploaded by

Wanda Beasley
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 24

By: Venu

Date:20-1-05
Chd.Rajesh
Date:20-1-05

Project: SITE "2P"-"VIB"


Doc. No.
Subject:Design of Slab @ 4.5m LVL(S5)
Sh. 1 of 1

Client: CCER&D
Job No.-

Office

Dept:

ONE-WAY WAY SLAB DESIGN

lg. Span (Ly)


Panel size =
fck =
fy =

9.20

2.75

25 N/mm2
500 N/mm2

Ly/Lx

=
(Assume D=
=
Dead load of the slab =

sh. Span(Lx)

3.35
150 mm
3.75

D*25 =

Floor finishes =
Live load =
Total load (w) =

126

Effective Span

2.876

Factored moment

Factored shear

18.87

Kn

Effective Depth Required(d)

62.72

mm

Total depth

86.72

Ast Required (Ast)

259

mm2

Ast Minimum

180

mm2

Spacing of Reinforcement bars

Provide

150 mm Thk

Kn/m2
Kn/m2
Kn/m2

mm
m

13.57 Kn-m

1.5*wl2/8

OK

Main
=

Kn/m2

2.00
3.00
8.75

dx prov

Dia of Reinforcement

ONE-WAY

Secondary
mm

8 mm

194.075221843 mm

300 mm

8 tor @
8 tor @

175 mm c/c Main Reinforcement


&
200 mm c/c in Secondary Reinforcement

Rev. No. R0

Check for Shear :

0.15 N/mm2

v
Percentage of Reinforcement Provided (pt)

0.11

25.47

c =

0.26 N/mm2

OK

Check for Deflection :

fs =0.58*fy*

Area of c/s of steel required


Area of c/s of steel provided

261 N/mm2

Basic span/eff depth ratio for continuous slabs

20

Modification factor
Coefficient for max ratio of span/eff depth

=
=

1.50
30

96

Effective Depth required

<
SAFE

126 mm

You might also like