0% found this document useful (0 votes)
72 views2 pages

Indure: Design of Column

This document provides design details for column C1 with member number 3738. Key details include: - The column has dimensions of 700x700mm and a length of 4500mm. - Reinforcement consists of 32φ32mm bars with an area of 19302mm2. - Loads include an axial load of 6297kN and bending moments of 203.6kNm and 1139kNm. - Design checks show the column design satisfies strength and serviceability limits. Reinforcement and shear design are adequate.

Uploaded by

AyazAkram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODS, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
72 views2 pages

Indure: Design of Column

This document provides design details for column C1 with member number 3738. Key details include: - The column has dimensions of 700x700mm and a length of 4500mm. - Reinforcement consists of 32φ32mm bars with an area of 19302mm2. - Loads include an axial load of 6297kN and bending moments of 203.6kNm and 1139kNm. - Design checks show the column design satisfies strength and serviceability limits. Reinforcement and shear design are adequate.

Uploaded by

AyazAkram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as ODS, PDF, TXT or read online on Scribd
You are on page 1/ 2

INDURE

DESIGN OF COLUMN

MEMBER NUMBER =

COLUMN MARK C1
9 10 37 38 797 & 798

General Data
Grade of Conc (fck)
Grade of Steel (fy)
Cover (cv)

=
=
=

25 mm
415 mm
40 mm

Size Per X-X (dx)


Size Per Y-Y (dy)
Un-supported Length Along X-X (lx)
Un-supported Length Along Y-Y(ly)
Effective Length Along X-X (lex)
Effective Length Along Y-Y (ley)
Lex/Dx (lex_dx)
Ley/Dy (ley_dy)

=
=
=
=
=
=
=
=

700 mm
700 mm
4500 mm
4500 mm
4500 mm
4500 mm
6.43
6.43

Load data (DL+LL)


Axial Load (Pu)
Moment-X (Mux_a)
Moment-Y(Muy_a)

=
=
=

6297 KN
2.55 KNm
1126.75 KNm

Moment due to minimum eccentricity


Along X-X (Mux_e)
Along Y-Y (Muy_e)

=
=

203.6 KNm
203.6 KNm

Design load data


Axial Load
Moament-X (Mux)
Moment-Y (Muy)

=
=
=

6297 KN
203.603 KNm
1139 KNm

Assuming R/F distributed on all four sides


Assuming pt (pt)
pt/fck (p_fck)
Pu/fckBD (Pu_fckbD)
d'/dx
d'/dy
Uniaxial Moment Capacity-X (Mux1)
Uniaxial Moment Capacity-Y (Muy1)
Puz (Puz)
Pu/Puz (Pu_Puz)
Alphan (alfn)
Mux/Mux1 (Mux_Mux1)
Muy/Muy1 (Muy_Muy1)
INTERACITON RATIO
Ast Required

=
=
=
=
=
=
=
=
=
=
=
=
=
=

3.6
0.144
0.51
0.07
0.07
1157.6 KNm
1157.6 KNm
10804.5 KN
0.58
1.638
0.18
0.18
0.12
17640 mm2

Document No. I-3057-PC-GL-07

Amakaantak TPP 1x210 MW

dy

dx

SHORT

L/C 23 MEMBER 37

Chart No Mu/fckbd2
44
0.135
44
0.135

SAFE
06/15/2015

INDURE
Provide

DESIGN OF COLUMN

32 Dia

24 Nos

Amakaantak TPP 1x210 MW

19302 mm2

OK

Check for shear


Provided percentage of reinforcement
p(t) (Ast*100/(b*d)

3.939

Shear - Y

0.1

Shear - Z
Total (Vu)
Tu
Pt for provided reinforcement
B(BETA) 0.8*fck/(6.89*pt)

=
=

443.86
443.96
0.906
3.939
1

KN
KN
N/mm^2

DELTA
1+(3Pu/Ag*fck)
Final Delta
value
to be for
used
Design
shear
strength
concrete Tc =
(0.85*sqrt(0.8fck)*(sqrt(1+5B)-1))/(6B)
Maximum shear stress Tc max.
Provide Nominal Shear Reinforcement
Vus
Vus / d
Provide
12
dia.
2
Sv (Spacing of stirrups required )

=
=
=

1.015
1.015
0.932
3.10

Clause 40.2.2 of IS 456


As per IS 456
N/mm^2 Clause 4.1 of SP 16
N/mm^2

443.96
6.89

KN
kN/cm

Document No. I-3057-PC-GL-07

=
=

%
KN

L/C 23 MEMBER 37

Clause 4.1 of SP 16

legged
100

mm

(Refer Table 62,SP:16)

06/15/2015

You might also like