Scribd
Upload
383 views5 pages

Pad Eye Puller Design

This document provides details on a pad eye load tester, including its dimensions as shown in drawings, the need for high tensile strength pin material and full penetration welds on load bearing parts, and specifications for the hydraulic ram with a 100mm diameter and 110mm length capable of pressures up to 10,000 PSI.

Uploaded by

budygmood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
383 views5 pages

Pad Eye Puller Design

This document provides details on a pad eye load tester, including its dimensions as shown in drawings, the need for high tensile strength pin material and full penetration welds on load bearing parts, and specifications for the hydraulic ram with a 100mm diameter and 110mm length capable of pressures up to 10,000 PSI.

Uploaded by

budygmood
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

DETAIL OF PAD EYE LOAD TESTER

DETAIL OF PAD EYE LOAD TESTER

DETAIL OF PAD EYE LOAD TESTER

DETAIL OF PAD EYE LOAD TESTER

DETAIL OF PAD EYE LOAD TESTER


DESCRIPTION

1.
2.
3.
4.
5.

PAD EYE LOAD TESTER / PUL TESTER


DIMENSIONS AS DESCRIBED IN DRAWINGS
PAY ATTENTION FOR PIN MATERIAL SHOULD BE HIGH TENSILE STRENGTH
FULL PENETRATION WELDS SHOULD BE DONE ON LOAD BEARING PART
DETAIL OF HYDRAULIC RAM AS BELOW:

100 MM DIAMETER

110 MM

CAPACITY
32 TO @
10.000 PSI

You might also like