Scribd
Upload
208 views1 page

Shaktiman Tech. Tools (India) - Patiala Data Sheet

This document provides specifications for a broach tool used in machining pinion yokes. The broach has 106 cutting teeth for boring and finishing the yoke, has an overall length of 1000mm, and is made from high speed steel. It will be used on a broaching machine with a maximum load of [UNKNOWN] and broaching stroke of [UNKNOWN] to machine pinion yokes made from S 35 C steel with a hardness of 180-210 BHN.

Uploaded by

ਗਗਨ ਜੋਤ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
208 views1 page

Shaktiman Tech. Tools (India) - Patiala Data Sheet

This document provides specifications for a broach tool used in machining pinion yokes. The broach has 106 cutting teeth for boring and finishing the yoke, has an overall length of 1000mm, and is made from high speed steel. It will be used on a broaching machine with a maximum load of [UNKNOWN] and broaching stroke of [UNKNOWN] to machine pinion yokes made from S 35 C steel with a hardness of 180-210 BHN.

Uploaded by

ਗਗਨ ਜੋਤ
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

COMPONENT DETAILS

BROACH DETAILS
HARDNESS
(HRC)

CUTTING TEETH & REAR END

64 - 66

MODULE / DP

----

D.B.P / U.P.D. (SOFT)

PULL END

45 - 48

PRESSURE ANGLE
MAJOR DIA.

----

PIN DIA. / FLATTENED

-------

P.C.D.
B.C.D.

----

BROACHING LENGTH

23.00

MAJOR DIA.

DIMENSION (RD. VS FLAT)

17.340 / 17.330

DIMENSION (RD-FLAT)

0
.34
17 7.335
1

PILOT DIA.
1000.0

CHAMFER

NIL

SEMI-TOPPING

NIL

SECTION A - A

ALL DIMENSIONS ARE IN MM.


MANUAL ALTERATIONS /
REVISIONS NOT ALLOWED.
DO NOT SCALE.

----

PRE-BORE DIA.
NO. OF SPLINES (Z)
CHAMFER

NIL
NIL

COMPONENT LENGTH

TO SPECIFY

COMPONENT MATERIAL

S 35 C

SEMI-TOPPING

NIL

COMPONENT HARDNESS

180 ~ 210 BHN

7.10
7.09

LENGTH OF BROACH

8.95
8.94

C 12
DIN 1415

J 12
DIN 1417

8
16

12

16
70

10
20

90

+ 0.1

140
225

2.50

TEETH DESCRIPTION
No. Of Teeth

1 to 88

ALTERATIONS
Rise / Tooth

2.0

DESCRIPTION

SHAKTIMAN TECH. TOOLS (INDIA) - PATIALA


APPROVED
BY

PULL TYPE ROUND & 2 - SIDE ANGULAR FLAT BROACH - PIE SHAPE for PINION YOKE

REF BROACH DRG: CT25211053 RAW MAT TYPE:

OVERALL LENGTH OF BROACH: 1000

PART DRG NO : 42FP033560/59 RAW MAT WEIGHT: 3.0 Kg

MATERIAL OF BROACH: H.S.S. (M-2)

89 to 92

2.0

0.010

Bore Semi Finishing Teeth

93 to 98

2.0

Bore Finishing Teeth

99 to 106

0.005
----

----

----

----

----

----

----

----

----

----

ALTR. NO.
& DATE

125

0.030

Bore Semi Finishing Teeth

----

VIEW - X

PITCH - 6.0, 6.5, 7.0


LAND - 2.50
DEPTH - 2.50
NO. OF TEETH - 106

9.92
9.91

6.0, 6.5, 7.0

NICKING DETAILS
INDEX 12 NICKS FROM
TEETH 1 to 92 AND GRIND
ON CUTTING PORTION ONLY.

COMPONENT DETAILS
AFTER BROACHING

----

40

25

1000

8
8.0

Bore Cutting Teeth

32

685

5
.35
17 0.1
-

Teeth Type

20

2.50

This drawing & information is the property of SHAKTIMAN TECH. TOOLS (INDIA). It is lent on the condition that it, in whole or in part shall not be
reproduced, copied, lent or disclosed to any person without written consent of SHAKTIMAN & shall be returned to SHAKTIMAN after its use or when asked.

PLOT NO: D-205, INDUSTRIAL FOCAL POINT, PATIALA (PUNJAB) PHONE NO: +91-981-419-2280,
0175-2233280. EMAIL:[email protected], [email protected]

SHAKTIMAN TECH. TOOLS (INDIA)-PATIALA

DATA SHEET

----

PART NAME: PINION YOKE

BROACHING MACHINE:

MAX. LOAD:

BROACHING STROKE:

TOOL NO:

WORKSHOP COPY SHEET NO: 1 / 2

STAMP: SHAKTIMAN / PULL RD & 2 SIDE ANGULAR FLAT /

DATE : 11 - 07 - 2013

CT25211053 / STI-139 / DISPATCH DATE / INVOICE NO.

SINGLE PASS

DRAWN BY:

CHECKED BY:

APPROVED BY:

GAGANJOT

O. PARKASH

GURVINDER SINGH

REV NO: NIL

DRAWING NO. : STI - 139

You might also like