Scribd
Upload
278 views1 page

Transformer No-Load & On-Load Transformer Unsolved

This document contains 5 questions about no-load and on-load transformers. The first question asks to determine the secondary voltage and primary and secondary currents given specifications for a single-phase transformer. The second asks to calculate components of no-load current for a transformer operating at rated voltage and power. The third asks to find magnetizing and iron loss components of no-load current. The fourth asks to write about a transformer on no-load. The fifth asks to draw a phasor diagram for an on-load transformer.

Uploaded by

Jatin hemwani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
278 views1 page

Transformer No-Load & On-Load Transformer Unsolved

This document contains 5 questions about no-load and on-load transformers. The first question asks to determine the secondary voltage and primary and secondary currents given specifications for a single-phase transformer. The second asks to calculate components of no-load current for a transformer operating at rated voltage and power. The third asks to find magnetizing and iron loss components of no-load current. The fourth asks to write about a transformer on no-load. The fifth asks to draw a phasor diagram for an on-load transformer.

Uploaded by

Jatin hemwani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 1

TRANSFORMER

NO-LOAD & ON-LOAD TRANSFORMER

UNSOLVED

Q.) A 60kVA, single-phase transformer has 600 turns on the


primary winding and 40 turns on the secondary winding. The
primary winding is connected to a 2.5kV, 50Hz supply. Determine
1) secondary voltage at no load and
2) primary and secondary currents at full load.

Q.) A 220/110V, single phase transformer takes an input of


350VA at no-load and at rated voltage. The core loss is 110W.
Find i) the iron loss component of no-load current,
ii) magnetizing component of no-load current and
iii) no-load pf.

Q.) A 1100/200V transformer takes 0.5A at pf of 0.3 on open


circuit. Find the magnetizing and iron loss components of no-load
primary current.

Q.) Write about transformer on no-load.

Q.) Draw phasor of on-load transformer.

You might also like