Scribd
Upload
177 views2 pages

Antenna K751161

The document describes the Kathrein K751161 omnidirectional antenna. It is designed for wireless, paging, SMR, and mobile applications from 790-960 MHz with a gain of 2 dBi. It has a vertical polarization, omni-directional radiation pattern, less than 1.5:1 VSWR, and can withstand winds up to 120 mph. It measures 13.7 inches high with a 0.83 inch radome and can be mounted inverted using included hardware for masts from 0.8 to 2.1 inches in diameter.

Uploaded by

ramuor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views2 pages

Antenna K751161

The document describes the Kathrein K751161 omnidirectional antenna. It is designed for wireless, paging, SMR, and mobile applications from 790-960 MHz with a gain of 2 dBi. It has a vertical polarization, omni-directional radiation pattern, less than 1.5:1 VSWR, and can withstand winds up to 120 mph. It measures 13.7 inches high with a 0.83 inch radome and can be mounted inverted using included hardware for masts from 0.8 to 2.1 inches in diameter.

Uploaded by

ramuor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

K751161

Omnidirectional Antenna

Kathreins omnidirectional antennas for wireless, paging, SMR


and mobile applications are extremely robust, using the finest
fiberglass, brass, and aluminum. Applicable mounting hardware
is fabricated from stainless steel. Many models may be mounted
inverted. Higher gain antennas can be provided with downtilt,
as well.
Wireless
Paging
SMR
Land Mobile
ISM

H-plane
Horizontal pattern
V-polarization

Specifications:
Frequency range
Gain
Impedance
VSWR
Intermodulation (2x5w)
Polarization
Maximum input power
H-plane beamwidth
E-plane beamwidth
Connector
Weight
Height
Radome diameter
Wind load
Side
Wind survival rating*
Shipping dimensions

790960 MHz (broadband)


2 dBi
50 ohms
< 1.5:1
IM3: <-150 dBc
Vertical
100 watts (at 50C)
Omni
78 degrees (half-power)
N female
1.6 lb (.74 kg)
13.7 inches (348 mm)
0.83 inches (21 mm)
at 93 mph (150kph)
4 lbf (17 N)
120 mph (200 kph)
17.9 x 4.4 x 3.8 inches
(455 x 112 x 97 mm)
Shipping weight
3 lb (1.4 kg)
Mounting
For masts of 0.8 to 2.1 inch
(20 to 54 mm) OD.
See reverse for order information.

E-plane
Vertical pattern
V-polarization

* Mechanical design is based on environmental conditions as stipulated


in TIA-222-G (December 2009) and/or ETS 300 019-1-4 which
include the static mechanical load imposed on an antenna by wind at
maximum velocity. See the Engineering Section of the catalog for further
details.

10062-J
936.450/k
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991

K751161

Omnidirectional Antenna

13.7 inches
(348 mm)
16.7 inches
(424 mm)

Mounting Options:

Description

Mounting for 1.6 to 2.1 inch (40 to 54 mm) OD mast

Mounting for 0.8 to 2.1 inch (20 to 54 mm) OD mast

Order Information:
Model
K751161

Description
Antenna with N connector
0 electrical downtilt

All specifications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500
Email: [email protected] Internet: www.kathrein-scala.com

Fax: (541) 779-3991

You might also like