Automotive Embedded Systems

Lecture at Voronezh State Univ.

Introduction to
Automotive Embedded Systems
8-June-2012

Hiroaki TAKADA
Executive Director and Professor
Center for Embedded Computing Systems, Nagoya Univ.
Chairman, TOPPERS Project
Email: hiro@ertl.jp URL: http://www.ertl.jp/~hiro/
Hiroaki Takada

Automotive Embedded Systems

Introduction of Nagoya and Nagoya Univ.

Nagoya
Center city of third largest metropolitan area in Japan
Tokyo (incl. Yokohama), Osaka, Nagoya,
Located around the center of Japanese Main Island
(between Tokyo and Osaka)
Manufacturing industry center of Japan
Automotive industries are concentrated, especially
The headquarters of Toyota Motor Corp. (located in
Toyota City) is near to Nagoya.
Nagoya University
National University located in Nagoya City
Within top 10 (I hope top 5!) universities of Japan
4 Nobel Prize Winners
Hiroaki Takada

Automotive Embedded Systems

Location of Nagoya

Tokyo
Osaka
Hamamatsu (Suzuki)

Nagoya
Hiroaki Takada

Toyota

Okazaki
(Mitsubishi Motor Corp.)

(Toyota Motor Corp.)

3

Automotive Embedded Systems

Self Introduction Hiroaki Takada

Current Positions
Professor, Nagoya University
Executive Director, Center for Embedded Computing
Systems (NCES), Nagoya University
Chairman, TOPPERS Project
and several others
Major Research Topics
Real-time operating systems for embedded systems
Real-time scheduling and analysis
Electronic system-level design
Automotive embedded systems
! several joint projects with Toyota Motor Corp. and
other Japanese automotive industries
Hiroaki Takada

Automotive Embedded Systems

Table of Contents
Introduction to Automotive Embedded Systems
Automotive Embedded Systems and their Features
Classification of Automotive Embedded Systems
Example Systems Engine Management, ...
Evolution Steps of Automotive Control Systems
Current Problems of Automotive Embedded Systems
Platform-base Development, AUTOSAR, JASPAR
ISO 26262 Functional Safety Standard

Brief Introduction to Our Activities NCES and TOPPERS

Introduction to NCES
Introduction to TOPPERS Project
Hiroaki Takada

Automotive Embedded Systems

INTRODUCTION TO
AUTOMOTIVE EMBEDDED SYSTEMS

Hiroaki Takada

Automotive Embedded Systems

Automotive Embedded (Computing) Systems

Embedded (Computing) Systems
A computer system that is embedded into an piece of

equipment or a machine to control it.

Embedded systems are applied to most electric/
electronic equipment, recently.
Automotive Embedded (Computing) System
A computer system that

is embedded into a car

to control it.
An embedded computer
unit is called an ECU
(Electronic Control Unit).
Hiroaki Takada

Engine Management ECU

32bit

Courtesy: Toyota Motor Corp. 7

Automotive Embedded Systems

Example: LEXUS LS-460

released in Sep., 2006.
more than 100 ECUs
embedded when all
optional equipments are
installed.
about 7,000,000 lines of
software embedded.

http://www.lexus.jp/

(from different news media)

Automotive Embedded Systems and Networks

Hiroaki Takada

Courtesy: DENSO 8

Automotive Embedded Systems

General Features of Automotive Embedded Systems

Many (as many as 100) ECUs are used for the

following purposes:
energy saving & low emission
safety (active & passive)
comfortableness, convenience, entertainment
cost & weight reduction
ECUs are connected with several in-vehicle networks.
High reliability and safety requirements
Strict real-time property required
Severe environmental conditions (temperature, EMC)
Severe production cost restriction
ECUs for different systems/services have different
requirements and require different technologies.

Hiroaki Takada

Automotive Embedded Systems

Classification of Automotive Embedded Systems

Powertrain and Chassis Control
engine, automatic transmission, hybrid control, ...
steering, brake, suspension, ...
Body Electronics
instrument panel, key, door, window, lighting,
air bag, seat belt, ...
Multimedia (Infortainment) Applications
car audio, car navigation, traffic information, ...
electronic toll collection (ETC), backguide monitor, ...
Integrated Systems/Services
electronic stability control, pre-crash safety,
parking assistance, lane keeping assistance, ...
Hiroaki Takada

10

Automotive Embedded Systems

Example (1) Engine Management System

System Components
control computer (ECU)
many sensors
crank position sensor
air flow meter
intake temperature sensor
throttle sensor
some actuators
Basic Functions of the Control
System
to calculate fuel injection
volume and ignition timing,
and to control the actuators
in every rotation cycle
Hiroaki Takada

Courtesy: Toyota Motor Corp. 11

Automotive Embedded Systems

Timing Behavior of Engine Management System

When rotation speed is 6000rpm, one cycle is
20msec.
Timing precision of the ignition is 10sec. order.
0
intake

180
injec&on

360

540

igni&on

720 (= 0)
intake

exhaust

Hiroaki Takada

Courtesy: Toyota Motor Corp. 12

Automotive Embedded Systems

Required Real-Time Property (Example)

The calculation of the fuel injection volume must be
finished before the injection timing.
The calculation of the ignition timing must be finished
before the ignition timing.
Calculating too early has no additional value.
Safety Requirement (Example)
Missing an ignition must not happen, because
inflammable gas is emitted outside of the engine and
can lead to a fire (because catalyst burns).
If the ignition plug of a cylinder is broken, fuel must
not be injected to the cylinder.
The engine management system monitors the ignition

plug and stops the injection if the plug is broken.

Hiroaki Takada

13

Automotive Embedded Systems

Example (2) ABS

ABS = Anti-lock Breaking System
Function of ABS
The speed of the car and the rotational speed of the
wheel are monitored, and a skid is detected.
When a skid is detected, hydraulic pressure to the
brake is reduced to stop the skid.
The system is relatively simple, but is becoming more
complex, recently.
Safety Requirement (Example) and Fail-Safe Design
Continuous reduction of hydraulic pressure causes
non-braking.
If some fault is detected, ABS stops functioning. Then,
the brake works though a skid cannot be avoided.
fail-safe design
Hiroaki Takada

14

Automotive Embedded Systems

Example (3) Airbag Control

Function of Airbag Control
Airbag control system
monitors various
sensors including
accelerometers and
detects a collision.
If a collision is detected, the ignition of a gas
generator propellant is triggered to inflate a bag.
Real-Time Constraint
The trigger must be within 10-20msec. after the
collision.
Safety Requirements
Fail-safe design cannot be applied.
! even harder than ABS
Hiroaki Takada

Courtesy: Toyota Motor Corp. 15

Automotive Embedded Systems

Example (4) Car Navigation System

The current position of the car obtained from GPS,

gyroscope, and others is displayed with the map.

Hiroaki Takada

Courtesy: Toyota Motor Corp. 16

Automotive Embedded Systems

Specific Requirements on Example Systems

Engine Management
very short response time (10 or 100sec. order)
large software and high computing power required
high reliability
Air Bag
a kind of signal processing application
short response time (10msec. order)
very high reliability
Car Navigation System
largest and most complicated software in a car
large computing power required
moderate reliability, real-time property still required
Hiroaki Takada

17

Automotive Embedded Systems

Requirements on In-Vehicle Networks

Chassis Network
high-speed CAN, FlexRay
short and guaranteed response time
small data size
high reliability
Body Electronics Network
low-speed CAN, LIN
a large number of network nodes and data
moderate reliability, low power consumption
Multimedia Network
MOST, IDB-1394
high bandwidth for multimedia data
moderate reliability
(True) By-Wire Network ... in future FlexRay?, TTP?
very high reliability
Hiroaki Takada

18

Automotive Embedded Systems

Evolution Steps of Automotive Control Systems

! Evolution of automotive control systems and networks
is well understood with the following 4 stages.
Stage 1
Computer control (ECU) is applied to various

component (engine, brake, steering, and so on),

independently.
In-vehicle network is not used.
Stage 2
Each control system (ECU) exchanges useful data for

improving the quality of the control system.

Each system operates almost independently, and
timing constraints on networks are loose.
Hiroaki Takada

19

Automotive Embedded Systems

Stage 3 (Current) integrated systems/services

Each system still operates autonomously, and some
services are provided with multiple ECUs connected
with in-vehicle networks.
Mechanical backup system still exists, thus the basic
functions of a car are preserved even if an electronic
system fails.
Stage 4.A (Future)
Networks with outside of the car (communication with
another car and the road) are intensively used.
Stage 4.B (Future)
(true) by-wire systems
Mechanical systems (incl. backups) are replaced with
ECUs and networks.
A failure of electronic systems is life-critical.
Hiroaki Takada

20

Automotive Embedded Systems

Integrated System/Service Examples

Vehicle Dynamics Integrated Management (VDIM)
Control brake, steering, and engine for avoiding slip

and spin.

Hiroaki Takada

Courtesy: Toyota Motor Corp. 21

Automotive Embedded Systems

Pre-crash Safety System (PCS)

When an obstacle is detected with stereo camera and

milimeter-wave radar, the system retracts the

seatbelts, warns the driver, and applies the brake.
Driver's condition (eg. face direction) is monitored.

Hiroaki Takada

Courtesy: Toyota Motor Corp. 22

Automotive Embedded Systems

Current Problems of Automotive Embedded Systems

Complicated system design
Increasing development cost and time
How to achieve high reliability and safety?

Large-scale and complicated software

How to achieve high reliability and safety?
How to effectively reuse existing software?

Too large number of ECUs

Increasing cost
Insufficient space (in a car) for ECUs

Complicated network architecture

Increasing design complexity
Hiroaki Takada

23

Automotive Embedded Systems

Platform-base Development
Conventional Component-base Development
Each ECU (component) is developed (usually

independently) at first.
An automotive component supplier develops both
of the hardware and software of ECU.
Car (system) is designed by integrating the ECUs
developed by different suppliers.
Platform-base Development
Platform (PF) should be developed at first.
PF = Hardware PF + Software PF + Network
Software PF = OS + middleware
Application software should be developed on the PF.
Hiroaki Takada

24

Automotive Embedded Systems

AUTOSAR (Automotive Open System Architecture)

A global partnership of carmakers, car component,

electronics, semiconductor, and software industries

founded in 2003.
defines a methodology that supports a distributed,
function-driven development process.
standardizes the software-architecture for ECU.
Core partners:
BMW
Daimler
PSA Peugeot Citroen
Bosch
Ford
Toyota Motor
Continental
GM
Volkswagen
Results and Current Status
Recent version (Release 4.0-REV 3) consists of about
100 specifications and 80 related documents.
Phase III activity was started in 2010.
Hiroaki Takada

25

Automotive Embedded Systems

Overview of AUTOSAR Framework

AUTOSAR Approach
Describe a system as a
set of software
components (SW-C)
connected with virtual
function bus, logically.
Map the system to ECUs
connected with in-vehicle
network by a tool.
ECU and system
constraint descriptions
are inputs to the tool.
The software platform
consists of RTE and
BSW.
Hiroaki Takada

26

Automotive Embedded Systems

Structure of AUTOSAR Software Platform

Run-Time Environment (RTE)
Provides interfaces between SW-Cs and between
SW-C and BSW.
Provides the BSW services to SW-C (API abstraction)
Source code of RTE is
generated by a tool from the
description of communication
interfaces
! the most distinctive feature
of AUTOSAR platform
Basic Software (BSW)
operating system (OS)
device drivers
middleware
Hiroaki Takada

27

Automotive Embedded Systems

Structure of Basic Software (BSW)

4 function groups (system, memory, communication, I/
O) are organized in 3 layers (service, ECU
abstraction, microcontroller abstraction)
complex drivers (to shortcut the layers)

Hiroaki Takada

28

Automotive Embedded Systems

JasPar (Japan Automotive Software Platform Architecture)

Car makers and other companies jointly develop

network technology, middleware, software platform for

automotive control systems (founded in 2004).
Board Members
Toyota Motor Honda
DENSO
Nissan
Toyota Tsusho Electronics
Members
about 100 carmakers, car component suppliers,
semiconductor companies, and software companies
Major Activities and Results
Standardization related to FlexRay (wiring rule, ...)
Development of software platform based on
AUTOSAR Standard.
Development of design guidelines for ISO 26262.
Hiroaki Takada

29

Automotive Embedded Systems

ISO 26262 Functional Safety Standard

What is Safety?
Safety : freedom from those conditions that can
cause death, injury, occupational illness, or damage
to or loss of equipment or property, or damage to the
environment
Reliability : the ability of a system or component to
per- form its required functions under stated
conditions for a specified period of time
A safe system is not necessarily reliable and vice
versa.
What is Functional Safety?
Original meaning: safety achieved by functions
absence of unreasonable risk due to hazards caused
by malfunctioning behavior of E/E systems (ISO
26262-1)

Hiroaki Takada

30

Automotive Embedded Systems

What is ISO 26262?

Road vehicles Functional safety
published in Nov. 2011.
Characteristics of ISO 26262
A compilation of best practice for developing a safetyrelated system.
In the standard, many development techniques of
safe systems are listed and required depending on
the safety level (ASIL).
Reliability of hardware is calculated from the failure
rate of each component consisting the system.
Reliability of software is achieved with software
development process.
A software that is developed with a process
satisfying the requirements of the standard is
considered to be enough reliable.
Hiroaki Takada

31

Automotive Embedded Systems

Overall Structure of ISO 26262

ISO 26262 consists of 10 parts (Part 10 has not been
published yet).
Part 1. Vocabulary
Part 2. Management of Functional Safety
Part 3.

Concept Phase

Part 4.

System Development

Part 5.

Part 6.

HW Development SW Development

Part 7.

Production
and Operation

Part 8. Supporting Processes

Part 9. ASIL-oriented and Safety-oriented Analyses
Part 10. Guideline on ISO 26262
Hiroaki Takada

32

Automotive Embedded Systems

ASIL (Automotive Safety Integrity Level)

requirement level of safety measures to be applied for

avoiding an unreasonable residual risk

four (+ one) levels
ASIL D
most stringent level
ASIL C
ASIL B
ASIL A
least stringent level
QM (quality management)
non-safety-related
ASIL is determined for each hazardous event based
on its severity, exposure, and controllability.

Hiroaki Takada

33

Automotive Embedded Systems

Future Trends of Automotive Embedded Systems

Advancement of Integrated Systems/Services
communication with another car and the road
using various information (surrounding situation and
map information) for controlling a car
emergence of true by-wire systems??
Changes in System Architecture
ECU integration (or reduction)
platform-base development
separation into two types of ECUs
Changes in Software Development
model-base design
component-base software development
virtual platform for software development
Hiroaki Takada

34

Automotive Embedded Systems

BRIEF INTRODUCTION TO OUR ACTIVITIES

NCES AND TOPPERS

Hiroaki Takada

35

Automotive Embedded Systems

Overview of Our Activities

ERTL (Embedded and Real-Time Systems Laboratory)
Takada Laboratory
several joint projects with car makers, semi-conductor
makers, and software companies
NCES (Center for Embedded Computing Systems)
several (relatively) large-scale joint projects with car
makers and car component suppliers
projects for educating embedded system engineers
TOPPERS ... independent non-profit organization
development of open-source real-time operating
system (RTOS) and middleware for embedded
systems
cooperation of academia, industry, public research
institutes, and individual engineers
Hiroaki Takada

36

Automotive Embedded Systems

Introduction to NCES
NCES (Center for Embedded Computing Systems)
a research center focused on embedded computing
systems
automotive application is the main focus
several (relatively) large-scale joint projects with car
makers and car component suppliers
established in 2006 to form a hub for collaborative
research and education of embedded systems
technologies
Scope of NCES
research aiming at practical use in industry
development of prototype system/software
education and human resource development
Hiroaki Takada

37

Automotive Embedded Systems

Major Research Projects of NCES

Projects funded by Industries
OS for in-vehicle multimedia systems (TMC)
Next-generation automotive network (AutoNetworks
Technologies, Ltd.)
Next-generation real-time operating system for
automotive control systems (consortium type)
Automotive data integration platform (consortium type)
Studies on functional safety standard (JarPar)
Software PF for Space Application (JAXA)
Projects funded by Government
Energy Consumption optimization of embedded
systems (JST CREST)
Automotive software platform conforming to the
functional safety standard (METI)
Hiroaki Takada

38

Automotive Embedded Systems

OS for In-vehicle Multimedia Systems

joint project with Toyota Motor Corp. started in 2006
a hybrid OS for in-vehicle multimedia systems to

achieve both reliability and flexibility/scalability

SafeG, the most important result, is distributed as an
open-source software from TOPPERS Project.
for reliability
Control
Control
Applications
RTOS

Control Network
CANLINFlexRay)
Hiroaki Takada

for flexibility/scalability
Network with
Infortainment
outside of the car
Infortainment
(Cellular Phone,
Applications
Internet)
General-Purpose
OS

Inter-OS Monitor
Multicore Processor

In-Vehicle
Multimedia
Network
39

Automotive Embedded Systems

Next-Generation Automotive Network

joint project with AutoNetworks Technologies, Ltd. (a

subsidiary of Sumitomo Electric Industries) started in

April, 2006
Concept of Scalable CAN
Scalable CAN is compatible with conventional CAN
from software point of view and achieves higher
bandwidth.
Scalable CAN and conventional CAN can be
connected with a gateway.
10Mbit/s CAN
star topology, in which each node is connected to a
central hub (gateway).
5Mbit/s CAN
bus topology with limited number of nodes on a bus.
Hiroaki Takada

40

Automotive Embedded Systems

Next-Generation RTOS for Automotive Systems

consortium-type project with NCES and 12 companies

started in Apr. 2011

12 engineers from these companies are staying at
NCES and engaged in the development.
What is to be developed
specification of next-generation RTOS for automotive
control systems based on AUTOSAR OS
RTOS implementation based on the specification
test suite for the RTOS
Release plan of the developed software
Developed RTOS will be released as an open source
software from TOPPERS Project.
Test suite is shared only by the consortium members.
Hiroaki Takada

41

Automotive Embedded Systems

Introduction to TOPPERS Project

TOPPERS = Toyohashi Open Platform for
Embedded and Real-Time Systems

Objectives of the Project

To develop various open-source software for
embedded systems including RTOS and to promote
their use.
Building a widely used open-source OS as Linux in
the area of embedded systems!
Main Activities of the Project
Building a definitive ITRON-conformant RTOS
Developing a next generation RTOS technology
Developing software development technology and
tools for embedded systems
Fostering Embedded System Engineers
Hiroaki Takada

42

Automotive Embedded Systems

Major Products (Software) of TOPPERS

! All SW listed below can be downloaded from the
TOPPERS website at http://www.toppers.jp/.
TOPPERS/JSP Kernel (JSP = Just Standard Profile)
RTOS conformant to the standard profile of
ITRON4.0 specification
TOPPERS/ATK1 (ATK = Automotive Kernel)
RTOS conformant to OSEK/VDX OS specification
TOPPER/ASP Kernel (ASP = Advanced Standard Profile)
Improvement of JSP kernel
Basis of TOPPERS new generation kernels
TOPPERS/FMP Kernel (FMP = Flexible Multiprocessing)
Extension of ASP kernel to various types of
multiprocessor systems
Hiroaki Takada

43

Automotive Embedded Systems

TECS (TOPPERS Embedded Component System)

Specification and tools for component-based

development of embedded software.

TINET

Compact TCP/IP protocol stack conformant to ITRON

TCP/IP API specification.

Both IPv4 and IPv6 are supported.
TLV (TraceLogVisualizer)

Customizable tool to visualize various trace logs,

including the trace log of RTOS

Several Open Educational Materials

Educational materials including presentation slides,

software, and so on.

Hiroaki Takada

44

Automotive Embedded Systems

Application Example of TOPPERS OS

Consumer Applications

IPSiO GX e3300 (Ricoh)

PM-A970 (EPSON)
DO!KARAOKE
PANASONIC
UA-101 (Roland)
Hiroaki Takada

GT-541 (Brother)
45

Automotive Embedded Systems

Industrial and Other Applications

DP-350
(Daihen)

Kizashi (SUZUKI)

H-IIBJAXA)
under development

Hiroaki Takada

ASTRO-H (JAXA)
under development

AP-X (Kyowa
MEDIX)

OSP-P200 (Okuma)
46