Scribd
Upload
130 views2 pages

AmiPur Survey Form Attachment

This document is an engineering survey form from Eco-Tec Inc. outlining the requirements and actual conditions for various inputs and outputs to an AmiPur-Plus system. It includes specifications for: A) Amine feed temperature, pressure, and filtration requirements. B) Process water temperature, pressure, filtration, total dissolved solids, hardness, and suspended solids requirements. C) Reflux water similar requirements as B. D) Compressed air temperature, dew point, pressure, filtration, and quality requirements. E) Cooling water temperature and pressure requirements. It also outlines site conditions, power source details, and electrical classification requirements.

Uploaded by

Sushant Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
130 views2 pages

AmiPur Survey Form Attachment

This document is an engineering survey form from Eco-Tec Inc. outlining the requirements and actual conditions for various inputs and outputs to an AmiPur-Plus system. It includes specifications for: A) Amine feed temperature, pressure, and filtration requirements. B) Process water temperature, pressure, filtration, total dissolved solids, hardness, and suspended solids requirements. C) Reflux water similar requirements as B. D) Compressed air temperature, dew point, pressure, filtration, and quality requirements. E) Cooling water temperature and pressure requirements. It also outlines site conditions, power source details, and electrical classification requirements.

Uploaded by

Sushant Sharma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

ECO-TEC INC.

AMIPUR ENGINEERING SURVEY FORM - ATTACHMENT A


BASIS OF EQUIPMENT DESIGN & AUXILIARY EQUIPMENT SELECTION
METRIC
ETI-AF-439
A. AMINE FEED
Unit

AmiPur-Plus Requirements

Enduser Actual
Condition

35-45

6.2*-10.3** / 6.3*-10.5**

absolute

10

Unit

AmiPur-Plus Requirements

Enduser Actual
Condition

30-45

5.0*-10.3 / 5.0*-10.5**

absolute

10

mg/L

<200

Hardness (as CaCO)

mg/L

<25

Total suspended solids

mg/L

<0.2

Unit

AmiPur-Plus Requirements

Enduser Actual
Condition

30-45

5.0*-10.3 / 5.0*-10.5**

absolute

10

mg/L

<200

Hardness (as CaCO)

mg/L

<25

Total suspended solids

mg/L

<0.2

Temperature
Pressure
Filtration

Bar(g)

kg

B. PROCESS WATER

Temperature
Pressure
Filtration

Bar(g)

kg

Total dissolved solids


(as CaCO)

C. REFLUX WATER

Temperature
Pressure
Filtration

Bar(g)

kg

Total dissolved solids


(as CaCO)

2013/09/19

ETI-AF-439

D. COMPRESSED AIR
Unit

AmiPur-Plus Requirements

Enduser Actual
Condition

Temperature

Dewpoint

Dewpoint at least 10C below


compressed air temp at point of use

4.2-6.2 / 4.2-6.2

<40

Clean, oil-free, dry

Unit

AmiPur-Plus Requirements

Enduser Actual
Condition

<32

>0.4 / >0.4

Pressure
Filtration

Bar(g)

kg

absolute

Quality

E. COOLING WATER

Temperature
Pressure

Bar(g)

kg

*=Lower limit will be recalculated when supply conditions are provided to Eco-Tec.
**=Upper limit if there is no pressure safety relief valve included in the design.
F. SITE CONDITIONS
Indoor
Outdoor
Ambient temperature range
Humidity
Coastal (salt spray)
Seismic zone
Windspeed
Snow Load

yes

no

G. POWER SOURCE
1 Phase
V (for control panel)
3 Phase
V (for motors)
Frequency Hz
H.

ELECTRICAL ARE CLASSIFICATION


Unclassified
Classified Class Division Group(s)
Atex

2013/09/19

ETI-AF-439

You might also like