0% found this document useful (0 votes)
79 views24 pagesDocuments 2
aaa
Uploaded by
naganathanCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
0% found this document useful (0 votes)
79 views24 pagesDocuments 2
aaa
Uploaded by
naganathanCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
/ 24
SGS
jo : INMUM/INDI2015
l eecsorereieriavaeal
‘SGS India Pvt. Ltd.
Inspect
inspection Report No. :- BPS/391/2018
Date of inspection : 26/08/2018 & 29/09/2015
| Time In : 9.00 AM | Time Out : 5.00 PM
‘Name of the Project ( if any )
Name of Glient
Name Seller/ Manufacturer / Vendor Mis. Astec Valves & Fittings Pvt.Ltd
‘Thumbli water Filed upgradation Projects
Ws. Caimn India Ltd
Name Seller / Manufacturer / Vendor
Client's P/O No. & Date Rajasthan / 4500026510 2
| Date of last inspection 27/07/2015
Inspection call reference 23/09/2015
Status of previous hold points / Deviation | -
P.O. Status: Completed / Balance / Hold
toms
a8 por
‘contac
‘Order
‘Quantity
Balance
(Nos)
Description & Sizo
Fittings, Valves & Tubes as per attached manufacture
Offer List Annexure -1
O Item 10, 20, 30, 40, 50, 60, 90, 100, 110, 120 & 150)
Uncontrolled document when printed PE-IN-IND}-IN-003/ Ver.00/01-01-2010/ Page 1 of 4
i SGS
SGS India Pvt. Ltd.
Inspection Report No: BPS/391/2015 Dt. 29/09/2015
Reference Documents
‘Scope of inspection and Status
‘Annexure No of
Hardness.
Year : ASTM A 769 UNSS31603
(EDITION 2015)
2) 10% witness dimensional, gauge
‘QAP ITP No sTPIFIDUTO0B/I5-16 & 100%visual check of lot
lssue 01 Rev 01 (for fitting) 3) Witness of 2 Loop per lot for
ITP/T1008/15-16 Rov2 (for Tubes) o Watea paren
ITPIBVIF60/008/15-16 Rev 00 (for ©) Winese of Packaging &
valve) Labeling.
‘Approved Drawing No. : For Fitting =
DUS0-8-MC-BN Rev0, DU-4-MC-4N | For Tubes:
Rev01, DU-60-8-U Rev01, DU-6-FC- | HR os. ots a DSS Tilbe for
BN Rev01, DU-4-C Rev01, S6-8-MC- ‘Chemical, Mech ropertieghy
8N Rev01, DU-8-UT Rev 01, Hardness, IGC Praeigg E..
For Tubes: DU-8-TU-0.085THK Rev0t, | 2) 10% witness dime oe
DU-4-TU-0.035THK Rev 01, S6-TU- & 100%ysualicneck fit
0.049 Rev 01, 3) Witness of 2 Li paet for
For Ball Valve: DU-GBV-8F RevOt Hydeo yaad
Roforence standard / code / 4) Wiiness PML sitet.
‘specification & Edition / Version / 8), Witness of jaca 8
For
‘Sampling Standard & Edition?
Version / Year : As per QAP
.
*enn-Chemical, Mech Properties &
Hardness
{0% witness dimensional, gauge
&100%hveual check of
Witness of 10% of lot for
Hyatostatl Test or body) at
53000 psig & 2400 psig for seat.
Witness of 10% of Lot for
Pneumate test 100p8g for seat.
‘Wess Pil of 20% of ot
Witness of Packaging &
Labeting.
Calculations of PREN
bay
3)
4)
5)
6)
7
Detailed report
PO No, : Rajasthan/4500026510 For Fittings:
1), Witness of 1 sample per lot for | Already witnessed by
‘Chemical, Mech Properties & | SGS
2| Arcody winessed by
305
Atready witnessed by
Ses
‘Current Hold points / Deviation:
material offered is UNSS32205 (F60) a:
18 per approved ITP.
Remarks: For tem No. 20, 90, 170 120 & 180 drawing mention material as UNSS31803 (F51) were as
Enclosure: Test Witness report PREN Value calculation Sheet.
q
Uncontrolled document when printed
‘QM-{IN}-{IND}-IN-003/ Ver.00/01-01-2010/ Page 2 of +
we SGS sosinaia pvt uss
Detailed Inspection Report
File No: IN/MUM/IND/2015 ‘Annexure No? 1
Report No and Date: - BPS/391/2015 Dt. 29.09.2015 Page : 1 of
Material and Quantity inspected:
‘As per page I of Report
‘Sr.
No.
Details of activity performed, findings and product marking
Conclusion
For Fittings:
1) 100% Visual check of fittings offered carried out for workmanship & fnish and
found satisfactory. A
Marking on fittings.
ASTEC
MATERIAL SPEC.
BATCH NO.
SIZE
2). 10% ofthe fitings dimensionally checked as per respective dgawing waLaWVIG] SeB9N OND
‘ss xgwuna swiyaiw went ‘av>..00 w/t ssa zanL avo] />-+-NA er oar sees
panatea | posed 190 8110 “ou weg
Ax au : a sod se uonétsaq wou fons
ea hy | are [M80] sees | MPO (04 10d se won dhs peaney | sO astec valves & fittings pvt. Itd
INSPECTION CERTIFICATE
(SRETORCSNSNE —_rcrtcoea76 TE aiamas
WS. CAIRN INDIA LIMITED,
Rajasthan / 4500026510 18-01-2015
‘Thumbli Water Field Upgradaet Project
Domestic 008 / 15-16 100124030
MALE CONNECTOR, 1/2" ODTX 1 NPT 40
‘DUGO-8-MC-8N DUPLEX
DU60-8-MG-8N '35.NOS.
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
BODY, NUT &
FERRULE
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIA 25MM F1064/ 07.07.2015
DIMENSIONAL & VISUAL CHECK RESULT:
BORE ‘vz opT | wepcii70 |” Check wih go & no-go gauge and found ox —|-—AGGEPTED
THREAD YE NPT | ATRG/423_| Check wih go & no-go gauge and found ok —| — ACCEPTED
THREAD LENGTH 49.10 | ANRCIS | 18.10 19.16 | 19.12] 19.14 | ACCEPTED
NUTLENGTH 47.50__|-AWRGIS | 17356 17.60__|_17.58_|-17.58 | ACCEPTED
INNER DIA 10:30 | ~awRcrs | 10.40 oz | 10.38] 10.40 | ~AccePTeD
HEX 22.00 | Aveces | 2210 22.10__| 2208 _| 22:12 ACCEPTED
HEX 22.00 | AWRCR3 | 72.06 22.08 | 22.02 | 22.101 ACCEPTED
‘BODY LENGTH 36.10 AWRGRS [38.18 | 3620 | 8.12] 38.14 | ACCEPTED
GENERAL TOLERANCE: + 2.0 MM
+ 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESULT:
Hydro Test "3000 Psig No leakage found
REMARKS:
02 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE
TABLE. NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST,
DELIVERY CONDITION:
UTHE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC GARTONG. ]
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA/ Client)
FIQCIOS REV. 01 ‘astec valves & filings pvi.Ild. | Inspection certificate
Page 1 of 1 astec valves & fittings pvt. Itd
INSPECTION CERTIFICATE
[ne aaa
WIS. CAIRN INDIA LIMITED,
Rajasthan / 4500026510 10-01-2015
Domestic 008 / 15-16 den] 100129068
ALE CONNECTOR, 1 20
DU-4-MC-4N uM DUPLEX
BODY, NUT &
Dae FERRULE,
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
‘and found ok
e and found ok_
‘ACCEPTED
‘ACCEPTED
‘Check with go &
‘Check with go &
‘AIBPGIN43,
‘ANTRGIS26
‘BORE io
THREAD,
74" ODT
1/4" NPT
THREAD LENGTH, 14.20 AIRCI23 1422 44.20 14.24 ‘ACCEPTED,
NUT LENGTH. 12.80. ANRC23 12.80. 12.82 12.82 ‘ACCEPTED,
INNER OA. 470, ANVROI23 4.90) 4:90 4.88, ‘ACCEPTED,
HEX 14.00, ‘ANRCI23 14.02 14.00. 14.06. ‘ACCEPTED,
714.08 ‘ACCEPTED
‘ACCEPTED
HEX. 14,00 ‘ANRGI23 14.04 74.02
‘BODY LENGTH 730.50, ANRCI23 30.60. 30.58 30.60.
GENERAL TOLERANCE: + 2.0 MM
‘= 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESULT:
No leakage found
REMARKS:
‘02 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE
TABLE. NO LEAKAGE FOUND & HENGE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(THE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS. J
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA Client)
FQCIOS REV. 01 astec valves & fitings pvt. td. | Inspection certificate
Page | of | astec valves & fittings pvt. Itd.
a Cc INSPECTION CERTIFICATE
[Ts EaERLESRENENET ic eivecwae Tn ars]
TiS. id
Rajasthan 4500026510 [ERDEAER] 1-01 2015
Taras Wn Bad Unicon
are 005 715-16 ace
‘Tube, 1/2" OD X 0.065" THK E
eee er
DUSTIODSST oe
Manufacturer Name, Material Type, Batch Number
412" 0D x0.085"
THK
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
Outer Dia 12.70, ANVRCI3 | 12.72 12.70 | 12.70 | 12.72 | ACCEPTED
Thickness 1.65 ‘AIVRCI23 | 1.90. 1.89 1.90 | 1.86 ‘ACCEPTED
(GENERAL TOLERANCE: + 2.0MM
‘© 100% Visual inspection and Dimensional check carried out by Astec and found satisfactory
HYDRO TEST RESULT:
Hydrostatic Test i 3000 Psig. No leakage found,
REMARKS:
100% tubes were Hydro-Preumatic tested as per above mentioned pressure rating and duration and found satisfactory
DELIVERY CONDITION:
‘The tubes were thoroughly cleaned, dried and ends are capped and packed.
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA / Client)
FIQCIOS REV. Of ‘astee valves & fitings pvt lid. | Inspection certificate
Page | of 1 ‘astec valves & fittings pvt. It.
INSPECTION CERTIFICATE
Tere 0BIAS [GE oe 8 920s)
MIS. Cairn India Limited
Rajasthan 4500025510 [ROU ate) 1.01015
Thumb Water Feld Upgradaet Project
Domestic 08 15-16 700128070
Tube, 14" OD X 0.036 THK 0
U-4-TU-0005 THK Duplex
DU-#-TU-005 THK 25 Mt.
‘Manufacturer Name, Material Type, Batch Number
THK
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
‘Outer Dia 6.35. ANRCI23 ‘6.40 = = ‘ACCEPTED.
Thickness 0.88, ‘ANRCI23 1.00, = = ‘ACCEPTED.
GENERAL TOLERANCE: + 20MM.
‘= 100% Visual inspection and Dimensional check carried out by Astec and found satisfactory
_ Hydrostatic Test 3000 Psig No leakage found
REMARKS:
100% tubes were Hydro-Pneumatic tested as per above mentioned pressure rating and duration and found satisfactory
DELIVERY CONDITION:
“The tubes were thoroughly cleaned, dried and ends are capped and packed,
j
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA / Client)
FIQGIOS REV. Of ‘aslec valves & filings pvt. td. | Inspection certificate
Page 1 of | astec valves & fittings pvt. Itd
INSPECTION CERTIFICATE
J
a wears
aagarivas irae
Rajasthan / 4500026510
[Rona ware
aes Waar Sedna
Domestic 008 /15-16 i 100124038
Tube, 1/2" OD X0.049° THK 9
'$6-8-TU-0.049 THK
‘36-8-TU-0.049 THK
‘Manufacturer Name, Materi
ia Type, Batch Number
F 2349 & F350 / Dt
112" 0D x 0.049"
28.07.2015
THK
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, IGC PRACTICE E & HARDNESS: As per test certificates
attached
DIMENSIONAL & VISUAL CHECK RESULT:
Outer Dia, 12.70 ANRCI23 1272 = = ‘ACCEPTED,
“Thickness 1.24 ‘ANRCI23 1.30 = = ‘ACCEPTED,
GENERAL TOLERANCE: + 2.0MM
‘+ 100% Visual inspection and Dimensional check carried out by Astec and found satisfactory
HYDRO TEST RESULT:
Hydrostatic. 3000 Pig o2 No leakage found |
REMARKS:
100% tubes were Hydro-Pneumatic tested as per above mentioned pressure rating and duration and found satisfactory
DELIVERY CONDITION:
“The tubes were thoroughly cleaned, dried and ends are capped and packed 42]
tas 2:
2
aw
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA | Client)
FIQCIOS REV. 01 astec valves & fittings pvt. Itd. | Inspection certificate
Page lott astec valves & fittings pvt. itd.
a ol INSPECTION CERTIFICATE
(InpectoTCoRINSTET — roTL coca Tmasews |
(WS, CAIRN INDIA LIMITED.
Rajasthan / 4500026510 19-01-2015
‘Thumbli Water Field Upgradaet Project
Domestic 008 / 15-16 100124034
UNION, 172" ODT 60
DUBO-8-U DUPLEX
‘DUGO-8-U 30 NOS,
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
BODY, NUT &
FERRULE,
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
BORE
NUT LENGTH,
INNER DIA
HEX
HEX.
BODY LENGTH
172" ODT
17.50
10.30
22.00.
22.00.
31.00
‘AIBPG/70
‘ANROI23
‘ANVRCI23
‘ANRCI23
‘ANRGI23
‘ANRGI23
‘Check with go &
17.50/17.52
10.40
22.10.
22.10
31.12
10 gauge and found ok.
17.52/17.50 | 17.58/17.54
10.38 10.40
22.10 22.06.
22.10 22.08)
31.10, 31.10
‘ACCEPTED.
‘ACCEPTED.
‘ACCEPTED.
ACCEPTED
‘ACCEPTED
‘ACCEPTED
GENERAL TOLERANCE: + 2.0 MM
‘+ 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESULT:
Hydro Test 3000 Psig 2 No leakage found
REMARKS:
‘02 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE.
‘TABLE. NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(THE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS. ]
3 on ee
ere |
QC Inspector Sign / Date Inspector Sign / Date
(Asteo) (TPIA 1 Cilent)
FIQCIOS REV. 01 ‘astec valves & filings pvt. td. | Inspection certificate
Page | of 1 astec valves & fittings pvt. Itd.
aS. or INSPECTION CERTIFICATE
(igpeeHRCaRNSTEN] —_iorLCooaeae Tar ae)
p 76 CARO TED
= Se en
‘Thumbli Water Field Upgradaet Project
Domestic 008 / 15-16 100129071
FEMALE CONNECTOR , 1/2" ODT X# NPTF 20,
DU-B-FC-EN. DUPLEX
(DU-B-FC-BN. 20 NOS,
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
DIA 32MM BODY. ‘ASTM A162 Gr. F60, N269PS 1065 / 07.07.2015,
DIA 25MM NUT & FERRULE ‘ASTM Ai82 Gr. FOO N268PS 1064 07.07.2015
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
‘ACCEPTED
‘ACCEPTED
‘ACCEPTED,
‘ACCEPTED,
‘and found ok
‘and found ok_
‘Check with go &
‘Check with go & no-
17.52 17.54
12" O0T _|_AIBPG/70
NPTF.
77.50
‘BORE
THREAD
NUT LENGTH
INNER DIA 10.30 10.40 40.42
“THREAD LENGTH, 19.10 19.16 19.14 ‘ACCEPTED,
HEX. 27.00 27.02 27.08, ‘ACCEPTED,
‘ACCEPTED,
‘ACCEPTED,
22.06.
37.58.
22.10
37.60,
22.00
37.50,
HEX
‘BODY LENGTH
(GENERAL TOLERANCE: ¢ 2.0 MM
‘= 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESULT:
No leakage found
Hydro Test
REMARKS:
‘02 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE
‘TABLE, NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(THE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS. 1
-
Eeieieerommnies cei |
GC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA / Client)
FIOCIOE REV. Of ‘astec valves & fitings pvt lid. | Inspection certificate
Page 1 of | astec valves & fittings pvt. itd.
INSPECTION CERTIFICATE
TEMTLGIOGBIOTOO [Dato 20 2 2-0-2076]
7S. CARN NDA UNITED.
Rajasthan 4600020610 [BOWERY e020
Thumbl Water Fit Uporadel Project
Domestic 008 / 15-16 100124035
CAP. 12 ODT 700
Dusos-c DUPLEX
Dusoe-c ZONOS.
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
‘BODY, NUT &
FERRULE:
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIA 25MM ASTM A182 Gr. F60
DIMENSIONAL & VISUAL CHECK RESULT:
‘ACCEPTED
‘ACCEPTED
"ACCEPTED
‘ACCEPTED.
‘ACCEPTED,
e and found ok
‘AIBPG/170,
‘ANRCRS
‘ANRCI23
ANRCI3
‘ANRCI23
‘Check with go &
17.50
22.04
22.08.
19.10
BORE
NUT LENGTH
HEX
HEX.
‘BODY LENGTH
“12 ODT.
17.50
22.00,
22.00
19.00.
17.54
22.02
22.04
19.09
GENERAL TOLERANCE: + 2.0 NM
100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESUL1
Hydro Test 3000 Psig No leakage found
REMARKS:
‘2 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE
TABLE. NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(CHE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS. ]
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA Client)
FIQGIOS REV. 01 astec valves &fitings pvt lid. | Inspection certificate
Page | of | astec valves & fittings pvt. Itd.
INSPECTION CERTIFICATE
WS. CAIRN INDIA LIMITED.
Rajasthan / 4500026510, 19-01-2015
“Thumbli Water Field Upgradaet Project
Domestic 008 / 15-16 100128072
CAP , 1/4" ODT 110.
DUC DUPLEX
Duc 20 NOS.
TEMLCROSETIO TEAS 28 2 29.00.2015]
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
a BODY, NUT &
DIA 25MM Peete F1064 / 07.07.2015
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates
sched.
DIMENSIONAL & VISUAL CHECK RESULT:
BORE 14" ODT | A/BPG/143_| Chock with go & no-go gauge and found ok | ACCEPTED
NUT LENGTH, 12.60 ANRCI23 12.82. 12.86. = "ACCEPTED,
HEX 14.00. ANRCI23, 44.02 14.08 ‘ACCEPTED,
HEX. 14.00 ‘AIVRCI23 14.04 14.02 ‘ACCEPTED,
‘BODY LENGTH 16.00 ‘AIVRCI23. 16.18 16.20 ‘ACCEPTED,
GENERAL TOLERANCE: + 2.0 MM
‘= 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESUL1
Hydro Test No leakage found
REMARKS:
‘2 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE,
TABLE. NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(THE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS.
QC Inspector Sign / Date Inspector Sign / Date
(Astoc) (TPIA / Client)
FIQGIOS REV. 07 TF ‘astec valves & filings pvt. td. | Inspection certificate
Page 1 of | astec valves & fittings pvt. Itd.
INSPECTION CERTIFICATE
TerTLoooarGT2o — ate ea 02075]
WS. CAIRN INDIA LIMITED.
Rajasthan / 4500026510
‘Thumbli Water Field Upgradaet Project
Domestic 008 / 15-76
BALL VALVE, 1/2" NPT.
DU-GBV-8F
DU-GBV-8F
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
19-01-2015
100129083,
120
DUPLEX
42 NOS.
Part Descriptio Batch No. | Rav
DIA45MM__| BODY & ADAPTOR
DIA 32MM BALL
‘ASTM A182 Gr. F60,
‘ASTM A182 Gr. F60
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
3738 / 25.08.2015
1065 /07.07.2015
DIMENSIONAL & VISUAL CHECK RI
THREAD 42 NPTF ‘Check with go & no-go gauge and found ok | ACCEPTED
BODY LENGTH 70.00 70:50 70.62 Ss ACCEPTED
DIA 42.50 12.60 12.64 = ACCEPTED
‘BODY 40.00 39.90, 4002 | = ‘ACCEPTED
(GENERAL TOLERANCE: + 5.0MM_
‘= 100% DIMENSIONS CHECK CARRIED OUT BY ASTEC AND FOUND SATISFACTORY.
HYDRO / PNEUMATIC TEST RESULT:
Hydro Test, 3000 Psig 2400 Pig 2 ‘No leakage found
Pneumatic Test = 100 Psig ot No leakage found
REMARKS:
700% OF VALVES WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE TABLE,
NO LEAKAGE FOUND & HENCE VALVE PASSES THE TEST.
DELIVERY CONDITION:
([THE VALVES WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS. ]
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA / Client)
FIOCIOS REV. 04 astec valves & fitngs pi. Rd. | Tnspedion cztfcate
Page 1 of 1 astec valves & fittings pvt. Itd.
INSPECTION CERTIFICATE
icmmLcrooarets [aed] wanes
MIS. CAIRN INDIA LIMITED.
Rajasthan 4500026510, woes
Thumbll Water Field Upgradaet Project
Domestic 008 / 15-16 100129067
UNION TEE, 1/2" ODT 150.
DU-8-UT DUPLEX
OU-8-UT 45 NOS,
MATERIAL TYPE, LOT NO., MANUFACTURER NAME, SIZE.
RAW MATERIAL TRACEABILITY REPORT:
DIA 32MM BODY. ‘ASTM A182 Gr. FOO. N269PS. 1065 / 07.07.2015
DIA 25MM NUT & FERRULE, ‘ASTM A182 Gr. FO, N268PS F064 / 07.07.2015
CHEMICAL ANALYSIS, PHYSICAL PROPERTIES, & HARDNESS: As per test certificates attached
DIMENSIONAL & VISUAL CHECK RESULT:
- Parameters
Dimension
SORE 2007 | ABPG/TO | Check win go & nogo gauge and undok_ | ACCEPTED
ur LENGTH 750 | awnons | "Sztrso| rrsanzsr | T accepreo
ARERR 030" awrees| 1040 —| toa =|“ ascerreD
TEX 2a00 | “awncras [2.00 —| at 08 =| TABCEPTED
HEX 2500 | “AWRGas [2008 | —an08 =|“ ASSEPTED
CENTRE 36.00 —| -awnoras | —s586—| a. =—“accerre0
BODY LENGTH 5200 -Awacas [61.60 —[ 61.8 =)" AccEPTED
(GENERAL TOLERANCE: 2.0 MM
‘© 100% VISUAL INSPECTION & DIMENSIONAL CHECK CARRIED OUT BY ASTEC.
HYDRO TEST RESULT:
Hydto Test
REMARKS:
(02 LOOP OF FITTINGS WERE INSTALLED ON HYDRO AND PNEUMATIC TEST AS MENTIONED IN THE ABOVE
TABLE. NO LEAKAGE FOUND & HENCE FITTING PASSES THE TEST.
DELIVERY CONDITION:
(THE FITTINGS WERE THROUGHLY CLEANED. THE THREAD ARE CAPPED AND PACKED IN ASTEC CARTONS: J
3000 Psig No leakage found
oe
Vat
SS
QC Inspector Sign / Date Inspector Sign / Date
(Astec) (TPIA | Client)
FIQCIOS REV.01 astec valves &fitings pvt itd | Inspection certificate
Page 1 of 1 astec valves & fittings pvt. td.
asec PMI REPORT
WS. CAIRN INDIA LIMITED,
Rajasthan / 4500026510 ate
Certo
PMI READINGS: 20% PMI READING AS PER PO QUANTITY
=e z
19.01.2015
Duplex (F 60)
TWCALIAVITOO1
40 | MALE CONNECTOR, %” OD X 1"
NPT (QTY. 35 no.)
7 BODY 2220 5.10 302 F60__| ACCEPTED
NUT 22.36 §.22 3.10 F60 ACCEPTED
FRONT FERRULE 22.60 521 3.12 F60__| ACCEPTED
BACK FERRULE 22.38 5.45 3.12 F60__| ACCEPTED
2 BODY 214 4.59 322 F60__| ACCEPTED
NUT 22.38 520 326 F60__|_ACCEPTED
FRONT FERRULE 22.66 544 3.08 Fe0__| ACCEPTED
BACK FERRULE 22.45 5.12 320 Fe0__| ACCEPTED
3 BODY 22.18 5.02 328 F60__|_ACEPTED
NUT 22.87 496 3.08 F60_ ‘ACCEPTED
FRONT FERRULE 22.54 4.90 3.40 F60__|_ ACCEPTED
BACK FERRULE 22.10 5.12 312 F60__| ACCEPTED.
a BODY 22.40 487 3.18 F60__| ACCEPTED
NUT 22.32 492 3.12 F60__| ACCEPTED
FRONT FERRULE 22.54 478 3:10 60 | ACCEPTED
BACK FERRULE 22.86 490 3.08 F60__| ACCEPTED
5 BODY 22.45 488 320 F60__|_AGGEPTED
NUT 22.35 4.95 3.15, F60__| ACCEPTED
FRONT FERRULE 22.58 477 3.46 Fe0___|_ ACCEPTED
BACK FERRULE 22.88 492 3.25 F60__| ACCEPTED
é BODY 22.48 485 3.08 Fe0__|_AGGEPTED
NUT 22.35 494 3.25 F60__| ACCEPTED
FRONT FERRULE 22.58 475 3.92 F60__| ACCEPTED
BACK FERRULE 22.22 4.90 342 F60__| ACCEPTED
Z BODY 22.50 480 F60__|_AGGEPTED
NUT 22:38 4.96 F60__| ACCEPTED
FRONT FERRULE 22.58 482 F60__| ACCEPTED
BACK FERRULE 22.25 ‘4gs—}—s1o | F60 | ACCEPTED
= j =
QC Inspector Sign / Bate fee Inspector Sign / Date
(Astec) {4 \ [8 F_sneny 4 eee
an | a | ‘sige valves & tings pvt-Ad" LV Pmi Report
fh Page 1 of 5 astec valves & fittings pvt. itd
.
a Cc PMI REPORT
PMICILO08
MALE CONNECTOR, 1/4” OD X
114” NPT (QTY. 25 no.)
1 BODY 22.45 5.00. 3.06) F60 ‘ACCEPTED,
NUT 22.10 5.12. 3.42. F60 ‘ACCEPTED
FRONT FERRULE: 22.56 5.16. 322, F60 ACCEPTED
BACK FERRULE 22.30 5.10. 3.16 F60 ‘ACCEPTED.
2 BODY 22.86 4.98 3.08) F60 ‘ACCEPTED,
NUT 22.10 5.02. 3:40 F60 ‘ACCEPTED
FRONT FERRULE 22.56 5.10. 3:16 F60 ‘ACCEPTED
BACK FERRULE 22.70 5.04 3.02. F60 ‘ACCEPTED
3 BODY 22.26 466 3:2 F60 ‘ACCEPTED,
NUT 22.30 480. 3:10) F60 ‘ACCEPTED
FRONT FERRULE 22.12 5.02. 3.16 F60 ‘ACCEPTED
BACK FERRULE 22.24 496 3.04 F60 ‘ACCEPTED
4 BODY 22.28 468 315) F60 ACCEPTED
NUT 22.25 4.82. 3:42. F60 "ACCEPTED
FRONT FERRULE 22.14 5.08 3.18 F60 ACCEPTED
BACK FERRULE 22.26 498. 3.08 F60 ACCEPTED
3 BODY 2275 478 340 F60 ACCEPTED
NUT 22.35 4.85 3.15 F60 ‘ACCEPTED
FRONT FERRULE 22.52 506 [318 F60 ‘ACCEPTED
BACK FERRULE 22.72 498) Eg F60 ‘ACCEPTED
60 | UNION, 1/2" OD (QTY. 30 no.)
4 BODY 2226 5:10 316 F60__| ACCEPTED
NUT 22:36 5.12 3.10 Feo | ACCEPTED
FRONT FERRULE 22.50 5.06 3.10) Feo ACCEPTED
BACK FERRULE 22.12 5.08 3.16 F60___| ACCEPTED
2 BODY 22.16 520 a4 F60__| ACCEPTED
NUT 22.22 5.26 3.16 F60__| ACCEPTED
FRONT FERRULE, 22.48 5.18 320 F60___| ACCEPTED
BACK FERRULE 22.10 522 322, F60__| ACCEPTED
2
3 BODY 22.56 496 318 F60__| ACCEPTED
NUT 22.45 4.90) 3.02, F60__| ACCEPTED
FRONT FERRULE 22.20 5.02, 338 F60__| ACCEPTED
BACK FERRULE 23.12 610 | 310 | 1F60 ACCEPTED
: [an Sa}
Qc inspector Sign Je | ve sre xa Iispector Sign / Date
3 i A
(Astec) (=) kc 3} G4 ( TPIA / Client )
FIQGI15 REV. 90)" f -astec valves & fittings pvt. itd. | Pmi Report
| i Page 2 of asteo valves & fifings pvt. td.
asec PMI REPORT
4 ‘BODY 22.62 5.08. 3.02. F60 ‘ACCEPTED,
NUT 22.52 5.12 3.10 60) ‘ACCEPTED,
FRONT FERRULE, 22.28 5.10 3.16 F60 ‘ACCEPTED,
BACK FERRULE 22.18 5.16 3.02, F60 ‘ACCEPTED
3 BODY 22.68 498 ant F60 ‘ACCEPTED
NUT. 22.40, 5.08) 3.08. F60 ‘ACCEPTED
FRONT FERRULE, 22.32 5.10 3.10 F60 ‘ACCEPTED
BACK FERRULE 22.20 518. 3.04 F60 ‘ACCEPTED
6 BODY 22.16 5.08) 302 F60 ‘ACCEPTED,
NUT 22.26 5.14 3:10) F60 ACCEPTED
FRONT FERRULE 22.08 5.42 3.08 60 ‘ACCEPTED
BACK FERRULE, 22.42 5.10 3.08 60, ‘ACCEPTED.
0 | FEMALE CONNECTOR, 172700
14" NPTF (QTY. 20.no,)
1 BODY. 22.65 5.12. 342, F60 ACCEPTED
NUT 22.58 5.10. 3.10 F60 ACCEPTED
FRONT FERRULE 22.30 5.06. 3:10 F60 ACCEPTED
BACK FERRULE, 22.16 5.12. 3.08 F60 ‘ACCEPTED,
zi BODY 22.45, 4.96 322, F60 ‘ACCEPTED.
NUT 22.50 5.02. 3.18, F60 ‘ACCEPTED
FRONT FERRULE 22.38 4.90. 3.42. FBO ACCEPTED
BACK FERRULE 22.55, 512 324 F60 ‘ACCEPTED
3 ‘BODY 22.40, 498 3.20 FOO) ‘ACCEPTED
NUT 22.52. 5.04 3.12 F60 ‘ACCEPTED
FRONT FERRULE, 22.42 492 3.14 F60 ‘ACCEPTED,
BACK FERRULE 22.52 5.10. 326 F60 ‘ACCEPTED,
4 BODY 2238 5.05. 315) F60 ‘ACCEPTED
NUT 22.47 5.15. 3.12 60 ‘ACCEPTED,
FRONT FERRULE, 22.40 5.08 3.10, 60) ‘ACCEPTED,
BACK FERRULE 22.56 8.7. 3.06) F60 ‘ACCEPTED,
400 | CAP, 172" OD (QTY. 20 no.)
: S00 PY
on 28 8 apnea
FRONT FERRULE 22.50 5.12 3.24 F60_ ACCEPTED
BACK FERRULE 22.44 5.22 3.10 F60 ACCEPTED
a
a ey m
3 Joe 0 a"
QC Inspector Sign / Date 7 } Ln Inspector Sign / Date
(Astec ) f (TPIA / Client )
FIQGI5 REV. 00 = astec valves & fittings pvt itd. | Pmi Report
| es
Sees astec valves & fitings pvt. td.
a ec PMI REPORT
2 BODY 22.18 478 3.04 Fe0__| ACCEPTED
NUT 22.40 470 3:10 FeO | ACCEPTED
FRONT FERRULE 22.36 4.86 3.14 Fe0__| ACCEPTED
BACK FERRULE 22.24 4.90 3.16 F60__| ACCEPTED
3 ‘BODY 2220 475 3.10 F60__| ACCEPTED
NUT 22.45 472 3.16 Feo | ACCEPTED
FRONT FERRULE 22.50 4.88, 3.16 F60__| ACCEPTED
BACK FERRULE 22.28 4.92 3.20 F60___| ACCEPTED
4 ‘BODY 22.25 452 3.08) F60___|_AGCEPTED
NUT 22.48 467 3.47) F60___| ACCEPTED
FRONT FERRULE 22.52 482 3.12 Fo0__| ACCEPTED
BACK FERRULE 22.30 4.90 3.44 F60___| ACCEPTED
110 | GAP, 114" OD _(GTY. 20 no)
[eer BODY, 22:36 5.02 az Foo__| ACCEPTED
NUT 22.42 5.10 3.10 Feo | ACCEPTED
FRONT FERRULE 22.30 5.16 322 F60__| ACCEPTED
BACK FERRULE 22.44 5.02 3.16 F60__| ACCEPTED
2 BODY 22.45 5.10 326 F60__| ACCEPTED
NUT 22.36 5.08) 340 F60__| ACCEPTED
FRONT FERRULE 22.38 5.16 3.02 F60__| ACCEPTED
BACK FERRULE 22.12 4.90) 3.10 F60__| ACCEPTED
3 BODY, 22.28 5.08 345) F60___| ACCEPTED
NUT 22.40 5.12 325 Fe0__| ACCEPTED
FRONT FERRULE 22.15 5.18; 326 Fe0__| ACCEPTED
BACK FERRULE 22.16 5.04 318) F60___| ACCEPTED
4 BODY 2252 5.08 3.08 F60__| ACCEPTED
NUT 22.38 515 315 Fe0__| ACCEPTED
FRONT FERRULE 22.28 5.18 3.12 Fe0__| ACCEPTED
BACK FERRULE 22.40 512 3.25 F60__| ACCEPTED
20 | BALL VALVE, #” NPTF
(QTY. 12 no.)
i BODY 22:35 5.10 3.10) F60__| ACCEPTED
‘ADAPTOR 22.45 5.26 3.412 F60__| ACCEPTED
22.20 5.44, 3.08) F60__ | ACCEPTED
Y el ap ey aeay
ac for Sign /,Date dy
