Scribd
Upload
458 views1 page

Dolly Test

A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

Uploaded by

mahesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
458 views1 page

Dolly Test

A pull-off test was conducted on March 30, 2014 at 5:20 PM by Sagar Chalake. The test used three dollies adhered with Aralditwe epoxy adhesive to a coated steel coupon with layers of BARRIER 80+, PENGUARD midcoat, and HARDTOP XP. All three tests resulted in 100% adhesive failures at the midcoat layer with strengths of 7.88, 11.54, and 8.14 MPa and were found to be satisfactory.

Uploaded by

mahesh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PULL OFF TEST

PROJECT:

ID:

SECTION

DATE

TIME

PERFORMED BY

STANDARD

S2

30.03.2014

05.20.PM

Sagar Chalake

ISO 4624

AIR TEMP.

REL. HUMIDITY %

EQUIPMENT

28C

53%

POSITEST-AT-M
(Manual Adhesion Tester)

COUPONS SIZE

ADHESIVE USED

COATING SYSTEM

ABBREVIATION

(5X75X150)mm

Aralditwe
Std. Epoxy Adhesive)

BARRIER 80+
PENGUARD MIDCOAT+
HARDTOP XP

A=Substrate, B=1st layer,


C=2nd layer, D=3rd layer,
Y=adhesive & Z=dolly

VALUE (Mpa)

COHESIVE
FAILURES

ADHESIVE FAILURES

RESULT

DOLLY - 1

7.88 MPa

NO

100% - C

FOUND SATISFACTORY

DOLLY - 2

11.54 Mpa

NO

100% - C

FOUND SATISFACTORY

DOLLY - 3

8.14 Mpa

NO

100% - C

FOUND SATISFACTORY

LOCATION OF TEST

BEFORE

AFTER

Customers Inspector:

You might also like