Scribd
Upload
40 views3 pages

Quiz 1 ECSol

This document contains a quiz for an Electrical Network Analysis course with 4 questions. The first question involves calculating the power absorbed and voltage across 3 lamps connected in parallel to a 230V supply. The second asks to calculate the required length of wire for a 5kW heater connected to 230V. The third asks to find the current Io and voltage across a 60Ω resistor in a given circuit. The fourth asks to use mesh analysis to find the current io in another given circuit. Solutions are provided for questions 1 and 2, while questions 3 and 4 simply state the questions without showing the solutions.

Uploaded by

Nabeel Khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views3 pages

Quiz 1 ECSol

This document contains a quiz for an Electrical Network Analysis course with 4 questions. The first question involves calculating the power absorbed and voltage across 3 lamps connected in parallel to a 230V supply. The second asks to calculate the required length of wire for a 5kW heater connected to 230V. The third asks to find the current Io and voltage across a 60Ω resistor in a given circuit. The fourth asks to use mesh analysis to find the current io in another given circuit. Solutions are provided for questions 1 and 2, while questions 3 and 4 simply state the questions without showing the solutions.

Uploaded by

Nabeel Khalid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Electrical Network Analysis (EEN-2124)

Fall 2015
Quiz - 1 Section
EC
Serial No.
08-10-2015
Name
Solution
Registration No.
Time
30 minutes
Marks Obtained
Instructor Prof. Nabeel Khalid Max. Marks
30
Quiz 1
1. Three incandescent lamps rated at 60W, 100W, 150W are connected in parallel. The
series arrangement connected across a 230 V supply. Calculate Power Absorbed by
each lamp, voltage across each lamp. Also prove that power absorbed is equal to power
supplied.
(7)
Solution:
The voltage across each lamp will be
V1 V2 V3 230V

Power Absorbed by each lamp and current through each lamp will be
P1 60W
I1

P1
60

0.261A
V1 230

P2 100W
I2

P2 100

0.435 A
V2 230

P3 150W
I3

P3 150

0.652 A
V3 230

Now Power absorbed and power supplied,


Power _ Supplied V * (I1 I 2 I3 )
Power _ Supplied 230 * (0.261 0.435 0.625) 304W
and
Power_Absorbed W1 W2 W3 60 100 150 310W

2. An electric radiating heater is required to dissipate 5kW power, when connected to a


230 V supply. A wire of 0.5 mm diameter is used in the construction of the above
mentioned heater, having specific resistance of 60 -cm. Calculate the required length
of wire.
(7)
Solution:
First calculate the resistance of the heater,
V2
R
V 2 2302
R

10.58
P 5000

From this we now calculate the length of the conductor,

l
4l

A
d2
Rd 2 *10.58*0.052
l

346.23cm
4
4*60 106
R

3. Calculate Io and voltage across 60 resistor for the circuit shown in figure-1.

Figure-1
Solution:

(8)

4. Use mesh analysis technique to find io in the circuit shown in figure-2.

Figure-2
Solution:

(8)

You might also like