Scribd
Upload
69 views1 page

DPA 5 Quickstart Guide: Instructions

This document provides instructions for setting up and using a DPA 5 Quickstart Guide. The 5-step process includes: 1) installing PC drivers from the included CD, 2) checking for updates after rebooting and downloading any available, 3) connecting the DPA to the PC using the USB cable and then connecting the vehicle cable to the DPA, 4) connecting the other end of the vehicle cable to the vehicle's diagnostic port, and 5) configuring the diagnostic application to use the DPA.

Uploaded by

Alan Wear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
69 views1 page

DPA 5 Quickstart Guide: Instructions

This document provides instructions for setting up and using a DPA 5 Quickstart Guide. The 5-step process includes: 1) installing PC drivers from the included CD, 2) checking for updates after rebooting and downloading any available, 3) connecting the DPA to the PC using the USB cable and then connecting the vehicle cable to the DPA, 4) connecting the other end of the vehicle cable to the vehicle's diagnostic port, and 5) configuring the diagnostic application to use the DPA.

Uploaded by

Alan Wear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DPA 5 Quickstart Guide

www.dgtech.com

Dearborn Protocol Adapter


PC

Power

Dual CAN / Bluetooth

Instructions:

CAN 1
SW CAN

CAN 2
J1850
J1708
ISO 9141

U.S. Patents 6,772,248 | 7,152,133 | 7,337,245 | 7,725,630

Install RP1210-compliant PC drivers from the CD.


The latest RP1210-compliant PC Drivers can always be found at http://www.dgtech.com

After rebooting, you will be prompted to check for updates. Connect to the Internet and press Continue. Then press the Check for
Updates button. If there are updates (red), press the Download button. DG Update will download and start the installation

Using the USB cable, connect the DPA to your PC. Connect the vehicle cable to the DPA.

Make certain to rst connect the vehicle cable to the DPA as stated in 3 above.
Finally, connect the other end of the vehicle cable to the vehicles diagnostic port

Congure your RP1210-compliant diagnostic application to use the DPA. The "DPA User Manual" contains information for conguring
many of the "common" applications. If your application is not covered in the manual, consult the documentation that came with your
application on how to congure for RP1210-compliant adapters.

| 33604 West Eight Mile Road Farmington Hills, MI 48335 | 248.888.2000 | 248.888.9977 fax | www.dgtech.com | [email protected] | store.dgtech.com |
m.0018.02

You might also like