Scribd
Upload
418 views2 pages

Design of Isolated Footing

The document summarizes the design of an isolated footing based on Eurocode standards. It provides input data such as material properties, load values, and column dimensions. The output includes safety factors, design constants, proportions for the footing dimensions, contact earth pressure distribution, and structural design values like required depths, thickness, moments, reinforcement area and spacing. The footing is designed as 450mm thick with Φ12 bars spaced at 130mm and 140mm in the two directions.

Uploaded by

TemesgenAbiy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
418 views2 pages

Design of Isolated Footing

The document summarizes the design of an isolated footing based on Eurocode standards. It provides input data such as material properties, load values, and column dimensions. The output includes safety factors, design constants, proportions for the footing dimensions, contact earth pressure distribution, and structural design values like required depths, thickness, moments, reinforcement area and spacing. The footing is designed as 450mm thick with Φ12 bars spaced at 130mm and 140mm in the two directions.

Uploaded by

TemesgenAbiy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

DESIGN OF ISOLATED FOOTING (BASED ON EBCS 7 AND 2)

INPUT DATA
[in kN-m units,others in their standard]
Material Quality and Workmanship
Concrete Grade

Steel Grade

C25

Allowable Stress

Class of Works

S300

Select bar diameter

300

Design Loads

I
12

Footing with predetermined

Column Dimensions
side x

0.25

side y

0.3

Axial Load

890

value(s) of

Moment X-X

0.2

ratio X:Y

Moment Y-Y

0.7

ratio X:Y
1
0.21

OUTPUTS
[in kN-m units, unless it is indicated]
PartialsafetyfactorandDesignConstants
C
fck
fcd
fctd
Concrete
Steel

1.50
S

20.00
fyk
300

1.15

11.33
fyd
260.87

Design
eccentricities
ex= 0.001
ey= 0.000

1.04
min
0.002

PROPORTIONING

FOOTINGDIMENSIONS
suited for construction
side X
side Y
1.75
1.75

CONTACTEARTHPRESSUREDISTRIBUTION
(At the four corners)

291.62

291.17

290.05

289.60

STRUCTURAL DESIGN
EFFECTIVEDEPTHREQUIREDFOR:

(a) punching shear


(b) wide beam shear

,deff=
,deff=

0.320
0.381

Observation:thecriticaldeff=

0.381

FOOTINGTHICKNESS
(rounded to multipe of 50)
Hence,modifiedcriticaldeff

= 450mm
= 0.382

MAXIMUMMOMENTSandarea of reinforcement
Mmax
Mdy= 143.31
Mdx= 133.73

Asreq (mm2)
1475.60
1374.53

No. bar
1412
1312

Asprov(mm2)
1582.56
1469.52

spacing(c/c)
130
140

Result: provide 12 with spacing of 130mm(c/c) in the direction of

provide 12 with spacing of 140mm(c/c) in the direction of

You might also like