VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 51001
Location
: MUMBAI
Sheet No.
: 1 of 1
GATE VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 51001
PIPING CLASS
: A1A, A9A, A10A, A11A,
B1A
STANDARD
RATING
: 800
STANDARD
: API-602
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 1.5"
ENDS
: SW 3000 TO B-16.11
RATING
ENDS
DESCRIPTION
CONSTRUCTION
BODY
MATERIAL
CONSTRUCTION
FORGED
ASTM A 105
BONNET
BOLTED
ASTM A 105
STEM
RISING
13% CR.STEEL (NO CASTING)
WEDGE DISC
SOLID
STELLITED
BODY SEAT RING
RENEWABLE
STELLITED
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAPHITED WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
HAND WHEEL
NON RISING
MALLEABLE IRON/CAST
ST/FAB.ST/DUCT. IRON
BONNET BOLTS
ASTM A193 GR B7
BONNET NUTS
ASTM A194 GR 2H
BONNET GASKET
SP WND SS316 - GRAPHITE
FILLER
SPECIAL SERVICE
CONDITION
MAX TEMP. 427 DEG. C.
BACK SEAT &
SHOULDER
INTEGRAL
OTHERS
O.S & Y.
HYDROSTATIC TEST
PRESSURE
BODY : 2975 PSIG.
TEST PRESSURE WITH
AIR
80 PSIG
MATERIAL
SEAT : 2175 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC IS ALLOWED.
TESTING SHALL BE AS PER API 598.
SHEET REV. NO.
DATE
SIGNATURE
&
SEAL
OF MANUFACTURER
19/04/2010
19/07/2010
21/12/2011
16/01/2012
51001
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 51301
Location
: MUMBAI
Sheet No.
: 1 of 1
GATE VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 51301
PIPING CLASS
: A1A,A9A,A11A,J3A
STANDARD
RATING
: 150
STANDARD
: API-600
MFGRS CAT/FIG
ENDS
: FLGD TO B-16.5 /
B-16.47B RF/125AARH
RATING
ENDS
SIZE RANGE
: 2.0" TO 42.0"
DESCRIPTION
CONSTRUCTION
BODY
CAST
MATERIAL
CONSTRUCTION
MATERIAL
ASTM A 216 GR.WCB
BONNET
BOLTED
ASTM A 216 GR.WCB
STEM
RISING
13% CR.STEEL (NO CASTING)
WEDGE DISC
SOLID/FLEXIBLE
13% CR.STEEL FACING /
13% CR.STEEL
BODY SEAT RING
RENEWABLE/NON
RENEWABLE
13% CR.STEEL FACING /
13% CR.STEEL
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAPHITED WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT
HAND WHEEL
NON RISING
MALLEABLE IRON/CAST
ST/FAB.ST/DUCT. IRON
BONNET BOLTS
ASTM A193 GR B7
BONNET NUTS
ASTM A194 GR 2H
BONNET GASKET
SP WND SS316-GRAPHITE
FILLER/CORRUGATED SOFT
IRON
REQUIREMENT OF
GEAR OPERATOR
14" NB & LARGER
SPECIAL SERVICE
CONDITION
MAX TEMP 427 DEG.C.
BACK SEAT & SHOULDER
13% CR STEEL
OTHERS
O.S & Y.
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
SPACE PROVIDED FOR, WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
4 TESTING SHALL BE AS PER API 598 FOR SIZES UPTO 24" AND AS PER BS 6755(PART-1) FOR SIZES 26" & ABOVE.
5 GATE VALVES OF SIZE 26" AND ABOVE SHALL BE IN ACCORDANCE WITH BS-1414 AND FLANGE ENDS SHALL
SIGNATURE
&
SEAL
OF MANUFACTURER
BE IN ACCORDANCE WITH ASME B16.47 SERIES B.
6 5% VALVE CASTINGS UPTO 24" AND 100% VALVE CASTINGS 26" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
SHEET REV. NO.
DATE
19/04/10
16/01/12
51301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 51401
Location
: MUMBAI
Sheet No.
: 1 of 1
GATE VALVE SPECIFICATION
TAG NO.
: 51401
PIPING CLASS
RATING
: 300
SIZE RANGE
: 2" TO 24"
DESCRIPTION
MANUF'S OFFER
: B1A
STANDARD
STANDARD
: API 600
MFGRS CAT/FIG
ENDS
: FLGD, B-16.5,
RF / 125 AARH
RATING
ENDS
CONSTRUCTION
MATERIAL
BODY
CAST
ASTM A 216 GR.WCB
BONNET
BOLTED
ASTM A 216 GR.WCB
STEM
RISING
13% CR. STEEL (NO CASTING)
WEDGE DISC
SOLID /FLEXIBLE
13% CR.STEEL FACING /
13% CR.STEEL
BODY SEAT RING
RENEWABLE / NON
RENEWABLE
13% CR.STEEL FACING /
13% CR.STEEL
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM.
GRAPHITED WITH SACRIFICIAL
CORR. INHIB. & INCONEL WIRE
REINFORCEMENT.
HAND WHEEL
NON RISING
MALLEABLE IRON / CAST ST /
FAB. ST / DUCT. IRON
BONNET BOLTS
ASTM A 193 GR.B7
BONNET NUTS
ASTM A 194 GR.2H
BONNET GASKET
SP WND SS316 -GRAPHITE FILLER
REQUIREMENT OF GEAR
OPERATOR
12" NB & LARGER
SPECIAL SERVICE
CONDITIONS
MAX TEMP. 427 DEG.C
BACK SEAT &
SHOULDER
13% CR. STEEL
OTHERS
O.S & Y.
HYDROSTATIC TEST
PRESSURE
BODY: 1125 PSIG.
TEST PRESSURE WITH
AIR
80 PSIG
CONSTRUCTION
MATERIAL
SEAT: 825 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR, WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER API 598.
SIGNATURE
&
SEAL
OF MANUFACTURER
10% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
SHEET REV. NO.
DATE
19/04/10
16/01/12
51401
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 52001
Location
: MUMBAI
Sheet No.
: 1 of 1
GLOBE VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 52001
PIPING CLASS
: A1A, A9A, A10A, A11A,
B1A
STANDARD
RATING
: 800
STANDARD
: BS-5352
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 1.5"
ENDS
: SW 3000 TO B-16.11
RATING
ENDS
DESCRIPTION
CONSTRUCTION
BODY
MATERIAL
CONSTRUCTION
FORGED
ASTM A 105
BONNET
BOLTED
ASTM A 105
STEM
RISING
13% CR.STEEL (NO CASTING)
DISC
LOOSE PLUG TYPE
STELLITED
BODY SEAT RING
RENEWABLE/NON
RENEWABLE
STELLITED
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAPHITE WITH SACRIFICIAL
CORR. INHIBITOR & INCONEL
WIRE REINFORCEMENT.
HAND WHEEL
RISING
MALLEABLE IRON/CAST
ST/FAB.ST/DUCT. IRON
BONNET BOLTS
ASTM A193 GR B7
BONNET NUTS
ASTM A194 GR 2H
BONNET GASKET
SP WND SS316 -GRAPHITE
FILLER
OTHERS
MATERIAL
O.S & Y.
SPECIAL SERVICE
CONDITION
MAX TEMP. 427 DEG. C.
BACK SEAT &
SHOULDER
INTEGRAL
HYDROSTATIC TEST
PRESSURE
BODY : 2975 PSIG.
TEST PRESSURE WITH
AIR
80 PSIG
SEAT : 2175 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS SPEC IS ALLOWED.
TESTING SHALL BE AS PER BS 6755 (PART-1).
SHEET REV. NO.
DATE
SIGNATURE
&
SEAL
OF MANUFACTURER
19/04/2010
19/07/2010
21/12/2011
16/01/2012
52001
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 52301
Location
: MUMBAI
Sheet No.
: 1 of 1
GLOBE VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 52301
PIPING CLASS
: A1A, A9A, A10A, A11A,
J3A
STANDARD
RATING
: 150
STANDARD
: BS-1873
MFGRS CAT/FIG
ENDS
: FLGD TO B-16.5
RF/125AARH
RATING
ENDS
SIZE RANGE
: 2.0" TO 16.0"
DESCRIPTION
CONSTRUCTION
BODY
CAST
MATERIAL
CONSTRUCTION
BONNET
BOLTED
ASTM A 216 GR.WCB
STEM
RISING
13% CR.STEEL (NO CASTING)
DISC
LOOSE PLUG TYPE
13% CR.STEEL FACING /
13% CR.STEEL
BODY SEAT RING
RENEWABLE/NON
RENEWABLE
13% CR.STEEL FACING /
13% CR.STEEL
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAPHITED WITH SACRIFICIAL
CORR. INHIB.& INCONEL WIRE
REINFORCEMENT.
HAND WHEEL
RISING
MALLEABLE IRON/CAST
ST/FAB.ST/DUCT. IRON
BONNET BOLTS
ASTM A193 GR B7
BONNET NUTS
ASTM A194 GR 2H
BONNET GASKET
SP WND SS316-GRAPHITE
FILLER
REQUIREMENT OF
GEAR OPERATOR
8" NB & LARGER
OTHERS
MATERIAL
ASTM A 216 GR.WCB
O.S & Y.
SPECIAL SERVICE
CONDITION
MAX TEMP 427 DEG. C.
BACK SEAT &
SHOULDER
13% CR STEEL
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR, WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER BS 6755 (PART-1).
5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
SHEET REV. NO.
DATE
SIGNATURE
&
SEAL
OF MANUFACTURER
19/04/2010
19/07/2010
21/12/2011
16/01/2012
52301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 52401
Location
: MUMBAI
Sheet No.
: 1 of 1
GLOBE VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 52401
PIPING CLASS
: B1A
STANDARD
RATING
: 300
STANDARD
: BS-1873
MFGRS CAT/FIG
SIZE RANGE
: 2" TO 12"
ENDS
: FLGD, B16.5,
RF / 125 AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
CONSTRUCTION
BODY
CAST
ASTM A 216 GR.WCB
BONNET
BOLTED
ASTM A 216 GR.WCB
STEM
RISING
13% CR. STEEL (NO CASTING)
DISC
LOOSE PLUG TYPE
13% CR.STEEL FACING /
13% CR.STEEL
BODY SEAT RING
RENEWABLE/NON
RENEWABLE
13% CR.STEEL FACING /
13% CR.STEEL
STEM PACKING
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAPHITED WITH SACRIFICIAL
CORR. INHIB. & INCONEL WIRE
REINFORCEMENT.
HAND WHEEL
RISING
MALLEABLE IRON / CAST ST /
FAB. ST / DUCT. IRON
BONNET BOLTS
ASTM A 193 GR.B7
BONNET NUTS
ASTM A 194 GR.2H
BONNET GASKET
SP WND SS316 - GRAPHITE
FILLER
REQUIREMENT OF GEAR
OPERATOR
8" NB & LARGER
OTHERS
MATERIAL
OS & Y
SPECIAL SERVICE
CONDITION
MAX TEMP. 427 DEG.C
BACK SEAT & SHOULDER
13% CR. STEEL
HYDROSTATIC TEST
PRESSURE
BODY: 1125 PSIG.
TEST PRESSURE WITH
AIR
80 PSIG
SEAT: 825 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER 6755 (PART-1).
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
SPACE PROVIDED FOR, WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
SHEET REV. NO.
DATE
19/04/2010
19/07/2010
21/12/2011
16/01/2012
SIGNATURE
&
SEAL
OF MANUFACTURER
52401
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 53001
Location
: MUMBAI
Sheet No.
: 1 of 1
CHECK VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 53001
PIPING CLASS
: A1A, A9A, A10A, A11A,
B1A
STANDARD
RATING
: 800
STANDARD
: BS-5352
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 1.5"
ENDS
: SW 3000 TO B-16.11
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
FORGED
ASTM A 105
COVER
BOLTED
ASTM A 105
DISC/PISTON
CONSTRUCTION
MATERIAL
STELLITED
RENEWABLE/NON
RENEWABLE
BODY SEAT RING
STELLITED
DISC HINGE/HINGE
PIN
COVER STUD BOLT
ASTM A193 GR B7
COVER NUT
ASTM A194 GR 2H
COVER GASKET
SP WND SS316-GRAPHITE FILLER
TYPE
LIFT CHECK TYPE
OTHERS
SPECIAL SERVICE
CONDITION
MAX TEMP. 427 DEG. C.
WASHER,NUT,PIN
HYDROSTATIC TEST
PRESSURE
BODY : 2975 PSIG.
SEAT : 2175 PSIG
TEST PRESSURE WITH
AIR
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS SPEC IS ALLOWED.
TESTING SHALL BE AS PER BS 6755 (PART-I).
VALVES SHALL BE OF STANDARD BORE DESIGN.
SHEET REV. NO.
DATE
19/07/2010
16/01/12
SIGNATURE
&
SEAL
OF MANUFACTURER
53001
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 53301
Location
: MUMBAI
Sheet No.
: 1 of 1
CHECK VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 53301
PIPING CLASS
: A1A,A9A,A11A,B1A,J3A
STANDARD
RATING
: 150
STANDARD
: BS-1868
MFGRS CAT/FIG
ENDS
: FLGD TO B-16.5
RF/125AARH
RATING
ENDS
SIZE RANGE
: 2.0" TO 24.0"
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
CAST
ASTM A 216 GR.WCB
COVER
BOLTED
ASTM A 216 GR.WCB
CONSTRUCTION
MATERIAL
13% CR.STEEL FACING /
13% CR.STEEL
DISC
RENEWABLE/NON
RENEWABLE
BODY SEAT RING
13% CR.STEEL FACING /
13% CR.STEEL
DISC HINGE
13% CR STEEL/A216 GR
WCB/A515 GR 70
HINGE PIN
13% CR STEEL(NO CASTING)
COVER STUD BOLT
ASTM A193 GR B7
COVER NUT
ASTM A194 GR 2H
COVER GASKET
SP WND SS316-GRAPHITE
FILLER/ CORRUGATED SOFT
IRON
BY PASSES
TYPE
SWING CHECK TYPE
OTHERS
SPECIAL SERVICE
CONDITION
MAX TEMP 427 DEG. C.
WASHER,NUT,PIN
13% CR STEEL(NO
CASTING)/SS410/SS304
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
SEAT : 325 PSIG
TEST PRESSURE WITH
AIR
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR, WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER BS 6755 (PART-I).
5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
SHEET REV. NO.
DATE
19/04/10
16/01/12
SIGNATURE
&
SEAL
OF MANUFACTURER
53301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 53401
Location
: MUMBAI
Sheet No.
: 1 of 1
CHECK VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 53401
PIPING CLASS
: B1A
STANDARD
RATING
: 300
STANDARD
: BS-1868
MFGRS CAT/FIG
ENDS
: FLGD, B 16.5,
RF / 125 AARH
RATING
ENDS
SIZE RANGE
: 2" TO 24"
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
CAST
ASTM A 216 GR.WCB
COVER
BOLTED
ASTM A 216 GR.WCB
CONSTRUCTION
MATERIAL
13% CR.STEEL FACING /
13% CR.STEEL
DISC
RENEWABLE /
NON RENEWABLE
BODY SEAT RING
13% CR.STEEL FACING /
13% CR.STEEL
DISC HINGE
13% CR. STEEL / ASTM A 216
GR.WCB / A515 GR.70
HINGE PIN
13% CR STEEL(NO CASTING)
COVER STUD BOLT
ASTM A193 GR.B7
COVER NUT
ASTM A 194 GR.2H
COVER GASKET
SP WND SS316-GRAPHITE FILLER
BY PASSES
TYPE
SWING CHECK TYPE
OTHERS
SPECIAL SERVICE
CONDITION
MAX TEMP. 427 DEG.C
WASHER, NUT, PIN
13% CR STEEL(NO
CASTING)/SS410/SS304
HYDROSTATIC TEST
PRESSURE
BODY: 1125 PSIG.
SEAT: 825 PSIG
TEST PRESSURE WITH
AIR
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC IS ALLOWED.
TESTING SHALL BE AS PER BS -6755 (PART-1).
5 20% VALVE CASTINGS UPTO 16" AND 100% VALVE CASTINGS 18" AND ABOVE SHALL UNDERGO
RADIOGRAPHIC EXAMINATION.
SHEET REV. NO.
DATE
19/07/2010
21/12/2011
16/01/2012
SIGNATURE
&
SEAL
OF MANUFACTURER
53401
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 54301
Location
: MUMBAI
Sheet No.
: 1 of 1
BALL VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 54301
PIPING CLASS
: A1A, A9A, A10A, A11A
STANDARD
RATING
: 150
STANDARD
: BS-5351
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 16.0"
ENDS
: FLGD TO B-16.5 RF/125AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
FORGED/CAST
ASTM A 105 / A 216GR.WCB
STEM
ANTI BLOWOUT
13% CR.STEEL/SS316; (NO CASTING)
BALL
SOLID
CONSTRUCTION
MATERIAL
13% CR.STEEL/SS304/SS316
RPTFE WITH SECONDARY METAL TO
METAL
BODY SEAT
GLAND
BOLTED/ RETAINED
BY NUT & WASHER
ASTM A105/13% CR STEEL/SS 316/SS 304
STEM SEAL
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAFOIL/PTFE V-RINGS +GRAFOIL
BODY SEAL
GRAFOIL/PTFE
BODY STUD
ASTM A193 GR.B7
BODY NUT
ASTM A194 GR 2H
OTHERS
REQUIREMENT OF
GEAR OPERATOR
6" NB & LARGER
SPECIAL SERVICE
CONDITION
MAX TEMP 204 DEG C.
SPRING
INCONEL X-750
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE
WITH AIR
80 PSIG
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS SPEC IS ALLOWED.
VALVES CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API-6D. FOR API 6D VALVES,MIN BODY WALL
THICKNESS SHALL BE PER ASME B16.34.
SIGNATURE
&
SEAL
OF MANUFACTURER
ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607 IV EDITION/BS
6755(PART II) /API RP 6FA
TESTING SHALL BE AS PER BS 6755(PART 1)/API 6D.
FOR TRUNNION MOUNTED BALL,BODY SEAT SHALL BE SPRING LOADED.
ALL VALVES SHALL BE BIDIRECTIONAL.
FLOATING BALL VALVES SHALL BE PROVIDED WITH PRESSURE EQUALISATION SEATS TO RELIEVE THE
BODY-BONNET CAVITY PRESSURE TO THE UPSTREAM SIDE.
10
10 % VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
11
BIDDER SHALL CERTIFY THE SUITABILITY OF VALVES FOR INTENDED SERVICE CONDITIONS.
12
BIDDER TO FURNISH SOFT SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED FOR RPTFE FROM ASTM
D4745 WITH MANUFACTURER'S RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING CURVE/TABLE.
13
STEM SEAL/BODY SEAL MATERIALS SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO.
DATE
0
19/07/2010
54301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 54401
Location
: MUMBAI
Sheet No.
: 1 of 1
BALL VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 54401
PIPING CLASS
: B1A
STANDARD
RATING
: 300
STANDARD
: BS - 5351
MFGRS CAT/FIG
ENDS
: FLGD, B - 16.5
RF / 125 AARH
RATING
ENDS
SIZE RANGE
: 0.5" TO 16"
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
FORGED / CAST
ASTM A 105 / ASTM A 216 GR.WCB
STEM
ANTI BLOWOUT
13% CR.STEEL/SS316; (NO CASTING)
BALL
SOLID
13% CR.STEEL/SS304/SS316
CONSTRUCTION
MATERIAL
RPTFE WITH SECONDARY METAL TO
METAL
BODY SEAT
GLAND
BOLTED /
RETAINED BY NUT &
WASHER
ASTM A105/13% CR STEEL/SS 316/SS 304
STEM SEAL
RENEWABLE WITH
VALVE OPEN ON
STREAM
GRAFOIL/PTFE V-RINGS + GRAFOIL
BODY SEAL
GRAFOIL/PTFE
BODY STUD
ASTM A 193 GR.B7
BODY NUT
ASTM A 194 GR.2H
OTHERS
REQUIREMENT OF GEAR
OPERATOR
6" NB & LARGER
SPECIAL SERVICE
CONDITIONS
MAX TEMP 204 DEG C.
SPRING
INCONEL X - 750
HYDROSTATIC TEST
PRESSURE
TEST PRESSURE WITH
AIR
BODY : 1125 PSIG
SEAT : 825 PSIG
80 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC IS ALLOWED.
VALVES CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API-6D.
FOR API 6D VALVES, MIN BODY WALL THICKNESS SHALL BE AS PER ASME B16.34.
ALL VALVES SHALL BE FIRE SAFE DESIGN. FIRE SAFE TEST SHALL BE AS PER API 607 IV EDITION /
BS 6755 (PART II) / API RP 6FA.
TESTING SHALL BE AS PER BS 6755 (PART-I) / API 6D.
FOR TRUNNION MOUNTED BALL, BODY SEAT SHALL BE SPRING LOADED.
ALL VALVES SHALL BE BIDIRECTIONAL.
SIGNATURE
&
SEAL
OF MANUFACTURER
9 FLOATING BALL VALVES SHALL BE PROVIDED WITH PRESSURE EQUALISATION SEATS TO RELIEVE THE
BODY-BONNET CAVITY PRESSURE TO THE UPSTREAM SIDE.
10 20% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
11 BIDDER SHALL CERTIFY THE SUITABILITY OF VALVES FOR INTENDED SERVICE CONDITIONS.
12 BIDDER TO FURNISH SOFT SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED FOR RPTFE FROM ASTM D4745
WITH MANUFACTURER'S RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING CURVE/TABLE.
13 STEM SEAL / BODY SEAL MATERIALS SHALL BE PROVIDED WITH CORROSION INHIBITOR.
14 10% VALVES IN EACH SIZE SHALL UNDERGO HYDROSTATIC TEST OF SEAT. SOFT SEAT SHALL BE REPLACED AFTER HYDROSTATIC TEST.
AFTER THIS ALL VALVES SHALL BE AIR TESTED.
SHEET REV. NO.
DATE
0
19/07/2010
54401
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 55301
Location
: MUMBAI
Sheet No.
: 1 of 1
PLUG VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 55301
PIPING CLASS
: A1A, A9A, A10A, A11A
STANDARD
RATING
: 150
STANDARD
: BS-5353
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 24.0"
ENDS
: FLGD TO B-16.5 RF/125AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
FORGED/CAST
ASTM A 105 / A 216GR.WCB
COVER
BOLTED
ASTM A 105/ASTM A 216 GR.WCB
PLUG
INVERTED, TAPER
ASTM A 105 / A 216GR.WCB, CASE
HARDENED & BONDED WITH LOW
FRICTION COATING
CONSTRUCTION
MATERIAL
ASTM A 105 / A 216GR.WCB, CASE
HARDENED & BONDED WITH LOW
FRICTION COATING
STEM
GLAND
BOLTED
ASTM A 105/A216 WCB
GLAND PACKING
RENEWABLE
GRAFOIL RINGS
LUBRICANT SCREW
WITH CHECK
VALVES
SS 410/A105
COVER BOLTS
ASTM A 193 GR. B7
COVER NUTS
ASTM A 194 GR. 2H
COVER GASKET
SP WND SS316-GRAPHITE FILLER
LUBRICATED,
PRESSURE BALANCED
OTHERS
REQUIREMENT OF
GEAR OPERATOR
8" NB & LARGER
SPECIAL SERVICE
CONDITION
HYDROCARBON, MAX. TEMP 250 DEG. C.
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE
WITH AIR
80 PSIG
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS SPEC IS ALLOWED.
PLUG VALVES IN ACCORDANCE WITH API-599 / API-6D ARE ALSO ACCEPTABLE.
FOR API 6D STD VALVE MIN. BODY WALL THICKNESS SHALL BE AS PER API 599/BS 5353.
6 TESTING SHALL BE AS PER BS 6755(PART-I)/API 598/API 6D
SIGNATURE
&
SEAL
OF MANUFACTURER
7 FOR WRENCH OPERATED VALVES, SEPARATE WRENCH REQUIRED FOR EACH VALVE.
8
VALVE POSITION INDICATOR SHALL BE PROVIDED.
VALVES SHALL BE FIRE-SAFE DESIGN AS PER BS-6755(PART-2) / API-607, 4TH EDITION/ API-6FA
10
VENDOR SHALL CONFIRM SUITABILITY OF LUBRICANT WITH RESPECT TO SERVICE AND SERVICE
CONDITIONS SPECIFIED.
11
BIDDER TO SUPPLY LUBRICANT FOR TWO YEARS OF NORMAL OPERATION.
12
10% VALVE CASTINGS SHALL UNDERGO RADIOGRAPIC EXAMINATION FOR SIZES UPTO 24".
13 UNLESS OTHERWISE SPECIFIED IN MR, VALVES SHALL BE SHORT PATTERN TYPE UPTO 12" AND VENTURI TYPE ABOVE 12" SIZE.
14 STEM INTEGRAL WITH PLUG IS ALSO ACCEPTABLE.
15 GLAND PACKING MATERIAL SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO.
DATE
0
19/07/2010
55301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 55401
Location
: MUMBAI
Sheet No.
: 1 of 1
PLUG VALVE SPECIFICATION
: B1A
STANDARD
STANDARD
: BS - 5353
MFGRS CAT/FIG
ENDS
: FLGD,B - 16.5
RF / 125 AARH
RATING
ENDS
CONSTRUCTION
MATERIAL
TAG NO.
: 55401
PIPING CLASS
RATING
: 300
SIZE RANGE
: 0.5" TO 12"
DESCRIPTION
MANUF'S OFFER
BODY
FORGED / CAST
ASTM A 105 / ASTM A 216 GR.WCB
COVER
BOLTED
ASTM A 105 / ASTM A 216 GR.WCB
PLUG
INVERTED,TAPER
ASTM A 105 / A 216GR.WCB, CASE
HARDENED& BONDED WITH LOW
FRICTION COATING
CONSTRUCTION
MATERIAL
ASTM A 105 / A 216GR.WCB, CASE
HARDENED& BONDED WITH LOW
FRICTION COATING
STEM
GLAND
BOLTED
ASTM A 105 / ASTM A 216 GR.WCB
GLAND PACKING
RENEWABLE
GRAFOIL RINGS
LUBRICANT SCREW
WITH CHECK VALVES
SS 410/ A 105
COVER BOLTS
ASTM A 193 GR.B7
COVER NUTS
ASTM A 194 GR.2H
COVER GASKET
SP.WND. SS316L-GRAPHITE FILLER
LUBRICATED,PRESSURE
BALANCED
OTHERS
REQUIREMENT OF GEAR
OPERATOR
6" NB & LARGER
SPECIAL SERVICE
CONDITIONS
HYDROCARBON;MAX TEMP 250 DEG.C.
HYDROSTATIC TEST
PRESSURE
BODY : 1125 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
SEAT : 825 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC IS ALLOWED.
PLUG VALVES IN ACCORADANCE WITH API-599 / API-6D ARE ALSO ACCETPTABLE.
FOR API 6D STD VALVES, MIN. BODY WALL THICKNESS SHALL BE AS PER API 599 / BS 5353.
TESTING SHALL BE AS PER BS 6755 (PART-I) / API 598 / API 6D.
FOR WRENCH OPERATED VALVES, SEPARATE WRENCH REQUIRED FOR EACH VALVE.
VALVE POSITION INDIACATOR SHALL BE PROVIDED.
VALVES SHALL BE FIRE-SAFE DESIGN AS PER BS 6755(PART-2)/API-607, 4TH EDITION/ API-6FA.
SIGNATURE
&
SEAL
OF MANUFACTURER
10 VENDOR SHALL CONFIRM SUITABILITY OF LUBRICANT WITH RESPECT TO SERVICE AND SERVICE CONDITIONS SPECIFIED .
11 BIDDER TO SUPPLY LUBRICANT FOR TWO YEARS OF NORMAL OPERATION.
12 STEM INTEGRAL WITH PLUG IS ALSO ACCEPTABLE.
13 20% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
14 UNLESS OTHERWISE SPECIFIED, VALVES SHALL BE SHORT PATTERN TYPE .
15 GLAND PACKING MATERIAL SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO.
DATE
0
19/07/2010
55401
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 56301
Location
: MUMBAI
Sheet No.
: 1 of 1
BUTTERFLY VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 56301
PIPING CLASS
: A1A, A10A
STANDARD
RATING
: 150
STANDARD
: BS - 5155
MFGRS CAT/FIG
SIZE RANGE
: 3" TO 24"
ENDS
: WAFL TO B-16.5 WAF/125AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
CAST
ASTM A 216 GR.WCB
DISC
CAST, TRIPLE
OFFSET
ASTM A 216 GR.WCB/ASTM A 351
GR.CF8M/ A351 GR.CF8/13% CR.STEEL
SHAFT
ANTI STATIC
17-4PH/A 479 XM19/13% CR.STEEL/
SS316/SS304(NO CASTING)
DISK SEAL
RPTFE
SHAFT BUSHING
PTFE/SS316
BODY SREWS / PIN
SS304/SS316
BODY SEATS
13% CR.STEEL/SS304/SS316/RPTFE(INBUILT)
SHAFT SEAL
PTFE+GRAFOIL/GRAFOIL
CLAMPING RINGS
(IF REQD.)
ASTM A 515 GR.70/SS316/SS304/13%
CR.STEEL
GASKET
SP.WND SS316+GRAFOIL FILLER
REQUIREMENT OF
GEAR OPERATOR
8" NB & LARGER
SPECIAL SERVICE
CONDITIONS
MAX TEMP 204 DEG C.
THRUST BEARING
SS 316
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
CONSTRUCTION
MATERIAL
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH VALVE SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON VALVE SPEC IS ALLOWED.
4 VALVE CAN ALSO BE SUPPLIED IN ACCORDANCE WITH API 609, CATEGORY-B.
5 VALVE TESTING SHALL BE AS PER BS 5155/BS 6755(PART-I)/ API 598.
6 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607/BS 6755(PART II) /API RP 6FA.
7
VALVES SHALL BE HIGH PERFORMANCE TYPE, TIGHT SHUT-OFF AND BI-DIRECTIONAL.
SIGNATURE
&
SEAL
OF MANUFACTURER
8 VALVE SHALL BE LUGGED WAFER TYPE(WAFL) AND VALVE ENDS TO SUIT B16.5 RF/125AARH.
9 FACE-TO-FACE DIMENSIONS SHALL BE AS PER WAFER SHORT/WAFER MEDIUM FOR BS-5155 VALVES AND AS
PER CATEGORY-B VALVES FOR API 609 VALVES.
10 5% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
11 DISC STRENGTH TEST SHALL BE CONDUCTED AS PER CODE.
12 VALVES SHALL BE SUITABLE FOR BOTH 'ON-OFF' AS WELL AS 'THROTTLING SERVICE' UNDER MAXIMUM DIFFERENTIAL PRESSURE FOR THE RATING
13 BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR IN MATERIAL ASTM A 193 GR.B7/A 194 GR.2H
14 VALVES SHALL BE PROVIDED WITH POSITION INDICATOR AND LOCKING DEVICE AT ANY POSITION.
15 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT SHALL BE SUBMITTED ALONG WITH THE OFFER
16 VENDOR SHALL SUBMIT VALVE DRAWING FOR APPROVAL
17 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED IN THE DATA SHEET FOR BUTTERFLY VALVES.
18 DISK SEALS SHALL BE PROVIDED FOR VALVES WITH METALLIC SEATS ONLY.
19 BIDDER TO FURNISH DISK SEAL/SOFT BODY SEAT DETAILS AND TYPE, GRADE & CLASS SELECTED FOR RPTFE FROM ASTM D4745 WITH
MANUFACTURER'S RECOMMENDATIONS LIKE PRESSURE-TEMPERATURE RATING CURVE/TABLE.
20 SHAFT SEAL MATERIAL(GRAFOIL) SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO.
DATE
0
5/4/2010
56301
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag no.
: 56315
Location
: MUMBAI
Sheet No.
: 1 of 1
BUTTERFLY VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 56315
PIPING CLASS
: A1A, A10A
STANDARD
RATING
: 150
STANDARD
: BS - 5155
MFGRS CAT/FIG
SIZE RANGE
: 26" TO 48"
ENDS
: FLGD TO B-16.47 B RF/125AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
CAST
ASTM A 216 GR.WCB
DISC
CAST, TRIPLE
OFFSET
ASTM A 216 GR.WCB/ASTM A 351
GR.CF8M/ A351 GR.CF8/13% CR.STEEL
SHAFT
ANTI STATIC
17-4PH/A 479 XM19/13% CR.STEEL/
SS316/SS304(NO CASTING)
DISK SEAL
SS316/SS316+GRAPHITE
SHAFT BUSHING
PTFE/SS316
BODY SREWS / PIN
SS304/SS316
BODY SEATS
13% CR STEEL/SS304/SS316/STELLITED
SHAFT SEAL
PTFE+GRAFOIL/GRAFOIL
CLAMPING RINGS(IF
REQD.)
ASTM A 515 GR.70/SS316/SS304/13%
CR.STEEL
GASKET
SP.WND SS316+GRAFOIL FILLER
REQUIREMENT OF
GEAR OPERATOR
8" NB & LARGER
SPECIAL SERVICE
CONDITIONS
MAX TEMP 204 DEG C.
THRUST BEARING
SS 316
HYDROSTATIC TEST
PRESSURE
BODY : 450 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
CONSTRUCTION
MATERIAL
SEAT : 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC, BIDDER SHALL INDICATE "AGREED".
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC IS ALLOWED.
4 VALVE TESTING SHALL BE AS PER BS 5155/BS 6755(PART-I).
SIGNATURE
&
SEAL
OF MANUFACTURER
5 ALL VALVES SHALL BE FIRE SAFE DESIGN.FIRE SAFE TEST SHALL BE AS PER API 607/BS 6755(PART II) /API RP 6FA.
6
VALVES SHALL BE HIGH PERFORMANCE TYPE, TIGHT SHUT-OFF AND BI-DIRECTIONAL.
7 VALVES SHALL BE DOUBLE FLANGED TYPE TO ASME B16.47B,RF/125AARH.
8 FACE-TO FACE DIMENSIONS SHALL BE AS PER BS 5155 SHORT PATTERN.
9 100% VALVE CASTINGS SHALL UNDERGO RADIOGRAPHIC EXAMINATION.
10 DISC STRENGTH TEST SHALL BE CONDUCTED AS PER CODE.
11 VALVES SHALL BE SUITABLE FOR BOTH 'ON-OFF' AS WELL AS 'THROTTLING SERVICE' UNDER MAXIMUM DIFFERENTIAL PRESSURE FOR THE RATING
12 BOLTINGS FOR TAPPED HOLES IN BODY, IF ANY, SHALL BE SUPPLIED BY VENDOR IN MATERIAL ASTM A 193 GR.B7/A 194 GR.2H
13 VALVES SHALL BE PROVIDED WITH POSITION INDICATOR AND LOCKING DEVICE AT ANY POSITION.
14 CROSS-SECTIONAL DETAIL OF BODY SEAT/SEAL ARRANGEMENT SHALL BE SUBMITTED ALONG WITH THE OFFER
15 VENDOR SHALL SUBMIT VALVE DRAWING FOR APPROVAL
16 VALVE SHALL BE CERTIFIED SUITABLE FOR THE SERVICE AND SERVICE CONDITIONS SPECIFIED IN THE DATA SHEET FOR BUTTERFLY VALVES.
17 SHAFT SEAL MATERIAL(GRAFOIL) SHALL BE PROVIDED WITH CORROSION INHIBITOR.
SHEET REV. NO.
DATE
0
19/07/2010
56315
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 64001
Location
: MUMBAI
Sheet No.
: 1 of 1
PISTON VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 64001
PIPING CLASS
: A1A
STANDARD
RATING
: 800
STANDARD
: MNF' STD.
MFGRS CAT/FIG
SIZE RANGE
: 0.5" TO 1.5"
ENDS
: SW,3000#,B16.11
RATING
ENDS
DESCRIPTION
CONSTRUCTION
MATERIAL
BODY
FORGED
BONNET
BOLTED
ASTM A 105
STEM
RISING
13% CR. STEEL (NO CASTING)
MATERIAL
ASTM A 105
PISTON
13% CR. STEEL / 17% CR. STEEL /
SS304 / SS316
LANTERN BUSH/ SPACER
13% CR. STEEL
UPPER VALVE RING
RENEWABLE
REFER NOTE 5 BELOW
LOWER VALVE RING
RENEWABLE
REFER NOTE 5 BELOW
BELLEVILLE WASHER
50 CR. V4 / ASTM A240 GR. 302
HANDWHEEL
MALLEABLE IRON / CAST ST /
FAB. ST / DUCT. IRON
BONNET BOLTS
ASTM A 193 GR.B7
BONNET NUTS
ASTM A 194 GR.2H
OTHERS
CONSTRUCTION
NON-REGULATING
PISTON VALVE
STEAM/CONDENSATE; MAX. TEMP.
350C (AT 800# CLASS PRESSURE AS
PER API-602)
SPECIAL SERVICE
CONDITION
HYDROSTATIC TEST
PRESSURE
BODY: 2975 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
SEAT: 2175 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER IBR & BS - 6755 (PART-1) & LEAKAGE RATE SHALL BE CATEGORY 'A'.
VENDOR SHALL SPECIFY THE MATERIAL AND CERTIFY THE SUITABILITY OF MATERIAL SELECTED FOR SEALING
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
SIGNATURE
&
SEAL
OF MANUFACTURER
RINGS AND THE PARTS NOT MENTIONED IN THE SPECIFICATION SHEET FOR
A).
THE SERVICE AND PRESSURE - TEMP. CONDITIONS SPECIFIED.
B).
HIGH. TEMP. EXPERIENCED DURING WELDING OF SOCKET WELDED ENDS OF PIPE.
SHEET REV. NO.
DATE
0
19/07/2010
64001
VALVE MATERIAL SPECIFICATION
Client
: HINDUSTAN PETROLEUM CORP. LTD.
Project
: DHT
Tag No.
: 64301
Location
: MUMBAI
Sheet No.
: 1 of 1
PISTON VALVE SPECIFICATION
MANUF'S OFFER
TAG NO.
: 64301
PIPING CLASS
: A1A
STANDARD
RATING
: 150
STANDARD
: MNF' STD.
MFGRS CAT/FIG
SIZE RANGE
: 2" TO 8"
ENDS
: FLGD TO B 16.5
RF/125AARH
RATING
ENDS
DESCRIPTION
CONSTRUCTION
BODY
CAST
MATERIAL
BOLTED
ASTM A 216 GR.WCB
STEM
RISING
13% CR. STEEL (NO CASTING)
PISTON
13% CR. STEEL / 17% CR. STEEL /
SS304 / SS316
LANTERN BUSH/ SPACER
13% CR. STEEL
RENEWABLE
LOWER VALVE RING
RENEWABLE
MATERIAL
ASTM A 216 GR.WCB
BONNET
UPPER VALVE RING
CONSTRUCTION
REFER NOTE 5 BELOW
REFER NOTE 5 BELOW
BELLEVILLE WASHER
50 CR. V4 / ASTM A240 GR. 302
HANDWHEEL
MALLEABLE IRON / CAST ST /
FAB. ST / DUCT. IRON
BONNET BOLTS
ASTM A 193 GR.B7
BONNET NUTS
ASTM A 194 GR.2H
REQUIREMENT OF
RADIOGRAPHY
5% VALVE CASTINGS SHALL
UNDERGO RADIOGRAPHIC
EXAMINATION.
NON-REGULATING
PISTON VALVE
OTHERS
STEAM/CONDENSATE; MAX. TEMP.
350C (AT 150# CLASS PRESSURE AS
PER API-602)
SPECIAL SERVICE
CONDITION
HYDROSTATIC TEST
PRESSURE
BODY: 450 PSIG
TEST PRESSURE WITH
AIR
80 PSIG
SEAT: 325 PSIG
NOTES
1 THIS VALVE SPEC SHEET SHALL BE READ IN CONJUNCTION WITH TECHNICAL NOTES FOR VALVES.
2
BIDDER SHALL CLEARLY WRITE ALL / ANY DEVIATION AGAINST EACH PART/ MATERIAL OF VALVE IN THE
NO CUTTING / OVERWRITING BY BIDDER ON JACOBS' SPEC. IS ALLOWED.
TESTING SHALL BE AS PER IBR & BS - 6755 (PART-1) & LEAKAGE RATE SHALL BE CATEGORY 'A'.
VENDOR SHALL SPECIFY THE MATERIAL AND CERTIFY THE SUITABILITY OF MATERIAL SELECTED FOR SEALING
SPACE PROVIDED FOR. WHEREVER BIDDER AGREES WITH JACOBS' SPEC., BIDDER SHALL INDICATE "AGREED".
SIGNATURE
&
SEAL
OF MANUFACTURER
RINGS AND THE PARTS NOT MENTIONED IN THE SPECIFICATION SHEET FOR THE SERVICE AND PRESSURE - TEMP.
CONDITIONS SPECIFIED.
SHEET REV. NO.
DATE
0
19/07/2010
64301
