Scribd
Upload
393 views2 pages

Test Bench For Decoder

This document describes a test bench for a decoder component. It tests four input cases by applying different inputs and checking the outputs against expected values, and reports any errors. It summarizes the results at the end indicating if the tests passed or failed.

Uploaded by

mnpaliwal020
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
393 views2 pages

Test Bench For Decoder

This document describes a test bench for a decoder component. It tests four input cases by applying different inputs and checking the outputs against expected values, and reports any errors. It summarizes the results at the end indicating if the tests passed or failed.

Uploaded by

mnpaliwal020
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

---------------------------------------------------------------

-- Test Bench for Decoder (ESD figure 2.5)


-- by Weijun Zhang, 04/2001
--
-- four cases are tested here.
---------------------------------------------------------------

library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_arith.all;

entity DECODER_TB is -- entity declaration


end DECODER_TB;

architecture TB of DECODER_TB is

signal T_I: std_logic_vector(1 downto 0):="00";


signal T_O: std_logic_vector(3 downto 0);

-- declare the component


component DECODER
port( I: in std_logic_vector(1 downto 0);
O: out std_logic_vector(3 downto 0)
);
end component;

begin

U_DECODER: DECODER port map (T_I, T_O);

process

-- variable should be declared within process


variable err_cnt : integer := 0;

begin

-- case "00"
wait for 10 ns;
T_I <= "00";
wait for 1 ns;
assert (T_O="0001") report "Error Case 0"
severity error;
if (T_O/="0001") then
err_cnt := err_cnt + 1;
end if;

-- case "01"
wait for 10 ns;
T_I <= "01";

wait for 1 ns;


assert (T_O="0010") report "Error Case 1"
severity error;
if (T_O/="0010") then
err_cnt := err_cnt + 1;
end if;
-- case "10"
wait for 10 ns;
T_I <= "10";

wait for 1 ns;


assert (T_O="0100") report "Error Case 2"
severity error;
if (T_O/="0100") then
err_cnt := err_cnt + 1;
end if;

-- case "11"
wait for 10 ns;
T_I <= "11";

wait for 1 ns;


assert (T_O="1000") report "Error Case 3"
severity error;
if (T_O/="1000") then
err_cnt := err_cnt + 1;
end if;

-- case "11"
wait for 10 ns;
T_I <= "UU";

-- summary of all the tests


if (err_cnt=0) then
assert false
report "Testbench of Adder completed successfully!"
severity note;
else
assert true
report "Something wrong, try again"
severity error;
end if;

wait;

end process;

end TB;

---------------------------------------------------------------
configuration CFG_TB of DECODER_TB is
for TB
end for;
end CFG_TB;
----------------------------------------------------------------

You might also like