AP00.20-P-0042TA Reset service indicator 23.2.

06
MODEL 211 as from 1.9.03
A1p13 Multifunction display
A1s3 Trip odometer reset button
S110s1 Scroll forward/back button
S110s3 System selection button
S111s1 Buttons + and - for setting
specific functions and volume
control

P54.30-6741-06

Adjust
1 Turn key in ignition switch to position "1".
2 Press system selection button (S110s3)
repeatedly until the basic display (kilometer
reading or temperature display) or speed
display is shown in the multifunction display
(A1p13)
3 Briefly press trip odometer reset button (A1s3) i An acoustic signal can be heard and the
3 times. voltage is shown in the multifunction display
(A1p13).
4 Press lower scroll forward/back button i The "Service menu" appears in the
(S110s1) multifunction display (A1p13).
5 Press buttons + and -, setting of specific
functions and volume control (S111s1)
repeatedly and select "Confirmation" menu
item
6 Press lower system selection button (S110s3) i "Confirmation" appears in the multifunction
to confirm. display (A1p13) and the menu item "Complete
service" is highlighted.
7 Press lower system selection button (S110s3) i "Service confirmed" appears in the
to confirm. multifunction display (A1p13).
8 Press the top system selection button
(S110s3) repeatedly until the "Service menu"
is shown in the multifunction display (A1p13)
9 Using the + and - buttons, setting of specific
functions and volume control (S111s1) select
the menu item "Special work"
10 Press lower system selection button (S110s3)
to confirm.
11 Using the + and - buttons, setting of specific
functions and volume control (S111s1), select
menu item "Service 13"
12 Press lower system selection button (S110s3)
to confirm.
13 Select the engine oil grade used by pressing i The number of selection options may vary
the + and - buttons, setting of specific depending on the engine.
functions and volume control (S111s1).
14 Press lower system selection button (S110s3) i The message "Position confirmed"
to confirm. appears in the multifunction display (A1p13).
15 Press system selection button (S110s3)
repeatedly until the basic display (kilometer
reading or temperature display) or speed
display is shown in the multifunction display
(A1p13)
16 Turn key in ignition switch to position "0".

Copyright DaimlerChrysler AG 6/30/07 G/03/07. This WIS printout will not be recorded by the update service. Page 1