Scribd
Upload
152 views

MSG 00003

This document discusses OS compatibility issues with the Agilent LogicWave and provides potential solutions. It notes that the LogicWave needs an IRQ associated with the parallel port, but Windows XP does not normally enable interrupts for parallel ports. It refers to an Agilent PDF with troubleshooting tips. A new driver called LogicWave_WinXPSP2.zip is also mentioned that may help get the LogicWave working on newer computers.

Uploaded by

cs9816521982
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
152 views

MSG 00003

This document discusses OS compatibility issues with the Agilent LogicWave and provides potential solutions. It notes that the LogicWave needs an IRQ associated with the parallel port, but Windows XP does not normally enable interrupts for parallel ports. It refers to an Agilent PDF with troubleshooting tips. A new driver called LogicWave_WinXPSP2.zip is also mentioned that may help get the LogicWave working on newer computers.

Uploaded by

cs9816521982
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Re: Agilent LogicWave OS Compatibility

Re: Agilent LogicWave OS Compatibility


Source: http://sci.techarchive.net/Archive/sci.electronics.equipment/200612/msg00003.html

From: "Keyser Soze" <noreturn@xxxxxxxxxxx> Date: Wed, 29 Nov 2006 00:21:30 GMT "mkaras" <mkaras@xxxxxxxxxxxxxxxxxx> wrote in message news:1159846421.997601.239450@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Keyser Soze wrote: I just found this document on the Agilent web site: http://www.home.agilent.com/upload/cmc_upload/All/LogicWave.pdf This seems to have some very useful tips on gettint the parallel port to work. It appears the LogicWave needs and IRQ associated with the parallel port. Windows XP does not normally enable interrupts for parallel ports.

Thanks for referring to the PDF support and Diagnostic checklist for LogicWave. I will try out some of the things there and see if I can get the thing to wake up on my newest computers. I'll report back with progress later. mkaras

I was looking around on the Agilent ftp site and found they have released a new driver for the LogicWave (E9340A). See of the LogicWave_WinXPSP2.zip at ftp://ftp.agilent.com/pub/callpub3/ddt/portbls/e9340a does what you need.

Re: Agilent LogicWave OS Compatibility

You might also like