Formula Reference Review

THE PERCENT TRIANGLE

The following triangle is a tool used to find part, whole, or percent.

EPQ, APQ, AND YIELD PERCENT TRIANGLE

The following triangle is a tool used to find the as-purchased quantity, edible portion quantity, and yield percent. It is identical to the percent triangle introduced in A Chapter 1 (page 12), although the terminology differs.
PART = Edible WHOLE =

portion quantity (EPQ)

As-purchased quantity (APQ) Yield percent (Y%)

PERCENT =

APO x YcY0
ASUIRSMOMOMMAINEMIC

rn

THE COST PER PORTION, SELLING PRICE, AND FOOD COST PERCENT TRIANGLE
The following triangle is a tool used to find the cost per portion, selling price, and food cost percent. It is identical to the percent triangle introduced in Chapter 1, page 12, although the terminology differs.
PART =

Cost per portion Selling price Food cost percent

Cost per Portion

WHOLE =

Selling Food Price )< Cost %

PERCENT =

THE COST PER BEVERAGE, SELLING PRICE, AND BEVERAGE COST PERCENT TRIANGLE
The following triangle is a tool used to find the cost pet beverage, selling price, and beverage cost percent.

PART =

Cost per beverage Selling price Beverage cost percent

Cost per Beverage Selling Beverage Price Cost %

WHOLE =

PERCENT =

For more information on beverage costing, please see Chapter 13, page 186.

CALCULATING THE AS-PURCHASED QUANTITY

As-purchased
quantity

(APQ)

Edible portion quantity (EPQ) Yield percent (in decimal form)

CALCULATING THE EDIBLE PORTION QUANTITY

Edible portion quantity (EPQ) = As-purchased x Yield percent quantity (APQ) (in decimal form)

CULINARY MATH

DETERMINING COST PER UNIT

Cost

per unit

As-purchased cost

Number of units

CALCULATING TOTAL COST

Total cost may be calculated using the following formula: Total cost = Number of units x Cost per unit

Must be the same unit

FORMULA FO k EDIBLE PORTION COST

Edible portion cost (EPC)

As-purchased cost (.APC)

Yield percent (in decimal form)

DETERMINING FOOD COST PERCENT

The food cost percent is the percent of the selling price that pays for the ingredients. The formula for the food cost percent is: Food cost percent

Food cost
Food sales or

Cost per portion

Selling price

DETERMINING SELLING PRICE

The cost per portion is used to calculate the selling price based on a desired food cost percent

Selling price

Cost per portion

Food cost percent (in decimal form)

Nppendix N FORMULA REFERENCE REVIEW

BEVERAGE COSTING
Beverage cost percent Beverage cost Beverage sales

CALCULATING THE RECIPE CONVERSION FACTOR

A recipe conversion factor (RCF) is a number that represents the relationship between the New antrOld recipe Yields7There are . three NOs of CalcUlating- ltCF: New recipe yield N Recipe Conversion Factor 1. Old recipe yield - 0 (Be careful not to invert thisyou will get ON instead of NO.) 2. NO rounding of the recipe conversion factor. 3. NO unitsthe recipe conversion factor carries no unit.

CULINARY MATH

In culinary math, rounding is handled differently depending on the situation. The following

chart summarizes all of the rounding rules covered in this text.

Solving word problems and determining ingredient costs on food cost forms Yield percent When solving word problems or determining ingredient costs on a food cost form using multiple steps, it is best not to round. However, you may leave your numbers truncated to the ten-thousandths place until you have arrived at your final answer. If you round drastically as you go, your solution will not be accurate. As a rule, yield percent should be truncated at the whole percent to ensure that enough product is ordered to provide the necessary yield. So, 45.6% should be rounded to 45%, not 46%. When calculating as-purchased cost, it is best not to round the number of units and the cost per unit. Rounding to the next higher cent should take place after the calculations are finished and the value for the as-purchased
cost has been determined. Rounding in each step of the calculation may

Cost per unit, total cost, and cost per portion

cause the answer to be significantly higher. Recipe conversion factor When calculating RCF, it is important not to round. This factor will be used to convert a recipe to produce a new yield. Once you have calculated your new ingredient quantities, you will have to round to more measurable amounts. Be careful not to round too drastically or the integrity of your recipe will be lost. When calculating the amount to order, it is always better to round up. For instance, if you calculate that you need to order 45.3 pounds of potatoes, you should round up to at least 46 pounds. When calculating the number of servings that can be obtained from a given! quantity of a menu item, it is always better to round down and not count a partial serving as a whole serving. For example, if you calculate that you can obtain 16.7 three-ounce servings of green bean almondine from a recipe, it is best to predict that the recipe will yield 16 servings, not 17. As with cost per unit, selling price should be rounded up to the next higher cent. In fact, you may adjust this price to a more menu-like price. For example. $6.2345 would round to $6.25.

Amount to order

Number of servings

Selling price

Blank Foo Cost Form

For practice or for food costing, work use the blank food costing form on the following page, or use the interactive Excel food cost form at http://www.wiley.com/goiculinarymath for additional practice.

ELEMENTS ON A FOOD COST FORM

Menu Item: The name of the recipe identified as accurately as possible, using a menu number if necessary. Date: The day, month, and year the cost was calculated. This can be important for later analysis. Number of portions: The number of portions the recipe makes or yields Size The portion size normally served. This applies to menu items and is generally given in the recipe; it is not calculated. Cost per portion: The cost of each serving. It is the total recipe cost divided by the number of portions.

FOOD COST FORM Menu Item: Number of Portions: Cost per Portion: Date: Size: Selling Price: Recipe Quantity (EP) Weight Volume Count Cost APC/Unit Yield % EPC/Unit Food Cost %: Total Cost

Ingredients

TOTAL RECIPE COST

CULINARY MATH

Culinary Math Glossary of Terms

AS PURCHASED COST (APC): The cost paid to the supplier for a nonfabricated (uncleaned)
-

ingredient

AS PURCHASED QUANTITY (APQ): The weight, volume, or count of a nonfabricated

-

fruit or vegetable. In other words, it is the quantity (weight, volume, or count) of a product as it is received from the vendor.

BEVERAGE COST: The cost of the ingredients used to produce beverage sales. BEVERAGE COST PERCENT: The percent of the selling price that pays for the beverage. THE BRIDGE METHOD: The technique used to convert from one unit of measure to another. BUSHEL: The largest unit of dry measure, equal to 4 pecks or 8 gallons. BUTCHER'S YIELD TEST: This is very similar to the yield test for fruits and vegetables.
The main difference is that the trim created during the fabrication of meat and poultry has value, whereas the trim created when fabricating fruits and vegetables generally does not.

CLEAN: The state of a product after it has been prepared to add to a recipe. This is called
the edible portion quantity.

COST PER PORTION: The cost of each serving. COST PER UNIT: The cost for one unit. The unit could be one of many things-1 peach,
1 ounce, 1 pound, 1 package, or 1 can.

COUNT: A term in the culinary world used to determine the number of a particular ingredient that is used in a recipe.

DECIMAL NUMBER: A number that uses a decimal point and place value to show values
less than one.

DENOMINATOR: The "bottom" number in a fraction. DIVIDEND: The number to be divided in a division problem. DIVISOR: The number that the dividend is being divided by. EDIBLE PORTION COST (EPC): The cost per unit of a fabricated (cleaned) fruit or vegetable. The EPC accounts not only for the cost of a fabricated product but also for the cost of the trim.

EDIBLE PORTION QUANTITY (EPQ): The weight, volume, or count of a fabricated fruit
or vegetable. In other words, it is the quantity (weight, volume, or count) of a product after it has been cleaned, peeled, or prepared (fabricated) and is ready for use. The word this term indicates that the product is ready for use in preparing a dish.

edible in

FABRICATED: The state of a product after it has been prepared to add to a recipe. See
also

clean and edible portion quantity.

FLUID OUNCE: A measure based on the amount of space filled by 1 ounce of water. FOOD COST: The total cost of food items used in food production to produce food sales. FOOD COST FORM: The form used in determining the cost of the ingredients in a given
recipe.

FOOD COST PERCENT: The percent of the selling price that pays for the ingredients. FRACTION: A number symbolic of the relationship between the part and the whole that
has a numerator and a denominator.

GRADUATED MEASURING CUPS: Cups usually used for measuring liquids. They may be
made of plastic, aluminum, or stainless steel. The common sizes are I cup, 1 pint, 1 quart, and 1 gallon.

HEAPING: A measure that is slightly fuller than level.

IMPROPER FRACTION: A fraction with a numerator that is greater than or equal to the
denominator, such as 4 or 4/4. /;

KITCHEN RATIO: A relationship of ingredients stated in parts. LADLES: Common sizes of ladles include 2 fluid ounces, 4 fluid ounces, and 8 fluid
ounces. They are used for measuring liquid.

LOWEST TERM FRACTION: The result of reducing a fraction so that the numerator and
-

the denominator have no common factors. For example, the fraction ' 4/28 reduces to IA

MEASURING SPOONS: Common sizes of measuring spoons are 1 tablespoon, 1 teaspoon,

/2 teaspoon, and''/{ teaspoon. They are used for measuring dry and liquid ingredients.

METRIC SYSTEM: The global language of measurement that has been adopted by almost
every country. The metric system is a system based on the number 10.

MIREPOIX: A combination of chopped aromatic vegetables used to flavor stocks, soups,

braises, and stews.

MIXED MEASURE: A measurement containing more than one unit. For example, 1 cup
2 tablespoons of flour or 3 pounds 2 ounces of potatoes are mixed measures.

MIXED NUMBER: A number that contains both a whole number and fraction, such as 4 1/2.
MULTIPLICAND AND MULTIPLIER: The numbers being multiplied.

NESTED MEASURING CUPS: Common sizes for nested measuring cups are I cup,
'

'/ , cup,

/3 cup, and /4 cup. They are used for measuring dry ingredients.

NEW FABRICATED COST AND NEW FABRICATED PRICE PER POUND: Terms used in
a butcher's yield instead of edible portion cost. The new fabricated price per pound recognizes the value of the trim that resulted from the fabrication process. Unlike fruits and vegetables, the trim from meat and poultry has a greater value. which needs to be taken into account when calculating the new fabricated price per pound.

CULINARY MATH

NONFABRICATED: The state of a product before it I-, ,eer. prepared to add to a recipe. See also unclean and as-pumbased quantity. NUMERATOR: The "top" number in a fraction. PECK: A unit of volume equal to V4 bushel or 2 gallons. PERCENT: A ratio of a number to 100; the symbol for percent is %. PORTION SCOOPS: Scoops that come in a wide array of sizes, which are numbered so that each number corresponds to the number of scoops it would take to make a quart. They are most commonly used to regulate single portions of finished food rather than ingredients. PRODUCT: The answer to a multiplication problem. PROPER FRACTION: A fraction in which the numerator is less than the denominator, such as 'is. QUOTIENT: The answer to a division problem. RATIO: A comparison of two numbers or the quotient of two numbers. A ratio can be expressed as a fraction, a division problem, or an expression, such as 3/5, 3 5, or 3 to 5. RECIPE CONVERSION FACTOR (RCF): A factor that is used to convert each recipe inredient quantity so that the new recipe yields the new desired amount. RECIPE COSTING: The process used to determine the cost of a given recipe. RECIPE SIZE CONVERSION: The process of converting the yield of a recipe to produce different, desired quantity. RECIPE YIELD: The quantity a recipe produces. REMAINDER: The number that remains after dividing. REPEATING DECIMAL OR RECURRING DECIMAL: The result of converting a fraction to decimal that repeats. If you convert 1/3 to a decimal, the result is 0.3333333 ... (the 3 goes In infinitely). To record a repeating decimal, it is common to put a bar over the first set of .-_peating digits: 0.3. SCANT: A measure that is slightly less full than level. SELLING PRICE: The price paid by the customer. TOTAL COST: The calculated cost of an item. In the food-service industry, it is important remember that cost is based on how much of a product is used for a particular recipe, - 0: on what is purchased. TOURNE: A decorative knife cut used on vegetables that produces a football or barrel It is considered one of the most demanding, time-consuming, and exacting cuts. TRIM: The weight or volume of the waste. Trim, mathematically speaking, is the differbetween APQand EPO, TRUNCATE: To cut off a number at a given decimal place without regard to rounding 12.34567 truncated to the hundredths place is 12.34). UNCLEAN: The state of a product before it has been prepared to add to a recipethe is-purchased quantity.

CULINARY MATH GLOSSARY OF TERMS

VOLUME MEASUREMENT: As it applies to the kitchen, generally refers to the common

measuring tools used in the United States, such as cups, teaspoons, and quarts. These tools are used to define the space that is tilled with the products being measured.

WEIGHT: The heaviness of a substance. Weight is determined using a scale. In kitchens in

the United States, there are two units of measure most commonly used to express weight pounds and ounces.
WHOLE NUMBERS: The counting numbers and 0. The whole numbers are 0, 1, 2, 3, 4, 5, etc. YIELD PERCENT: The percent of the as-purchased quantity that is edible.

11111---CULINARY MATH