Scribd
Upload
23 views1 page

Automatic Temperature Controller

The document describes an automatic temperature controller that measures and displays the temperature of parts like a running DC motor coil. If the temperature gets too high, it can damage the coil. The controller places a circuit on the motor surface to monitor the temperature. It will display the current temperature on an LCD and can show warnings like "high" or "low" if the temperature exceeds safe levels, as programmed into the microcontroller. The project teaches how to interface a microcontroller with an LCD and IR sensor for temperature readings, and design printed circuit boards. Microcontroller IDE and KiCAD are required tools.

Uploaded by

Prayog Tech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views1 page

Automatic Temperature Controller

The document describes an automatic temperature controller that measures and displays the temperature of parts like a running DC motor coil. If the temperature gets too high, it can damage the coil. The controller places a circuit on the motor surface to monitor the temperature. It will display the current temperature on an LCD and can show warnings like "high" or "low" if the temperature exceeds safe levels, as programmed into the microcontroller. The project teaches how to interface a microcontroller with an LCD and IR sensor for temperature readings, and design printed circuit boards. Microcontroller IDE and KiCAD are required tools.

Uploaded by

Prayog Tech
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Automatic Temperature Controller

Abstract:
To measure and display the temperature of the most temperature sensitive regions, such as a running DC motor. If the motor runs excessively the temperature raises to a level enough to damage the coil of the motor. At that time if the circuit is placed over the surface of the motor the system displays the temperature and if necessary it can also if the temperature is crossing a danger level by displaying a high programmed in the micro controller. Similarly, a low can also be displayed.

Block Diagram:

Scope:
In this project you can learn about 1. Micro controller 2. Interfacing a. LCD b. IR sensor 3. PCB DESIGNING

Tolls required:
Microcontroller Ide and KiCAD

http://prayogtech.co.in/#act/academicprojects.html

You might also like