0% found this document useful (0 votes)
1K views

Internet Config Guide For Gpon

This document provides configuration steps to create internet services for an Huawei MA5600 GPON OLT with an OT550 ONT. It includes configuring VLANs, link aggregation, traffic profiles, ONT profiles, binding the ONT and its services, and verifying the configuration.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
1K views

Internet Config Guide For Gpon

This document provides configuration steps to create internet services for an Huawei MA5600 GPON OLT with an OT550 ONT. It includes configuring VLANs, link aggregation, traffic profiles, ONT profiles, binding the ONT and its services, and verifying the configuration.
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

TO CREATE INTERNET SERVICES FOR HUAWEI GPON MA5600T WITH ONT OT550

user name:root
password:admin
MA5600>enable
MA5600#config
MA5600(config)#vlan 1284 smart
MA5600(config)#link-aggregation 0/19 0,1 egress-ingress (Only 2 1GBPS uplinks used port 0 & 1)
MA5600(config)#port vlan 1284 0/19 0
The port list includes link aggregation master port(s),
so the other link aggregation port(s)
not being included by the port list will be processed
MA5600(config)#tcont-profile add type1 fix 2500
MA5600(config)#traffic table ip car 2048 priority 0 priority-policy pvc-Setting
Create traffic descriptor record successfully
----------------------------------------------------------------------------TD Index
: 25
Priority
:0
Priority policy : pvc-pri
CAR
: 2048 kbps
TD Type
: NoClpNoScr
Service category : ubr
Referenced Status: not used
EnPPDISC
: on
EnEPDISC
: on
Clp01Pcr
: 2048 kbps
----------------------------------------------------------------------------MA5600(config)#display ont-profile all
-------------------------------------------------------------------------Profile ID
Binding Times
-------------------------------------------------------------------------1
0
2
0
3
0
4
0
100
1
101
1
104
1
105
1
-------------------------------------------------------------------------Total 8
MA5600(config)#ont-profile add profile-id 128 profile-name OT550 Select from 17-128
Press 'Q' or 'q' to quit input
> Number of uplink PON ports<1-2> [1]:
> Number of IP addresses<0-IP config not supported,1-one address> [1]:
> The type of MAC bridge<1-Single,2-Multi> [1]:
> Number of GEM ports<1-32> [32]:
> Is UNI configuration concerned?<1-not concern, 2-concern> [2]:
> Number of POTS ports<0-16> [0]:2
> Number of FE ports<0-32> [0]:4
> Number of GE ports<0-8> [0]:

> TDM port type<1-E1,2-T1> [1]:


> TDM service type<1-TDMoGEM> [1]:
> Number of TDM ports<0-8> [0]:
> Number of MOCA ports<0-8> [0]:
> Number of CATV ANI ports<0-2> [0]:
> Number of CATV UNI ports<0-16> [0]:
> Mapping mode<1-VLANID, 2-802_1pPRI, 3-VLANID_802_1pPRI> [1]:
> Number of T-CONTs<1-8> [1]:8
> Number of PQs in T-CONT 0<1-8> [4]:1 for ONT PQS ONLY 1 IS AVAILABLE
> Number of PQs in T-CONT 1<1-8> [4]:1
> Number of PQs in T-CONT 2<1-8> [4]:1
> Number of PQs in T-CONT 3<1-8> [4]:1
> Number of PQs in T-CONT 4<1-8> [4]:1
> Number of PQs in T-CONT 5<1-8> [4]:1
> Number of PQs in T-CONT 6<1-8> [4]:1
> Number of PQs in T-CONT 7<1-8> [4]:1
Adding an ONT profile succeeded
Profile-ID : 127
Profile-Name : OT550
MA5600(config)#interface gpon 0/2 frame 0 slot 2
MA5600(config-if-gpon-0/2)#ont add
{ portid<U><0,3> }:1 PON port no. 1
{ sn-value<S><13,13>|ontid<U><0,63> }:3 ONT assigned ID
{ sn-value<S><13,13> }:2011-CEE4A840
{ sn-auth<K>|password-auth<K> }:sn-auth
{ profile-id<K>|profile-name<K> }:profile-id
{ profile-id-value<U><1,128> }:127 ONT profile ID created above for the ONT profile add
{ <cr>|desc<K> }:desc
{ describe-value<S><1,80> }:group_3_ONT
Command:
ont add 1 3 2011-CEE4A840 sn-auth profile-id 127 desc group_3_ONT
Number of ONTs that can be added: 1, success: 1
PortID :1, ONTID :3
MA5600(config-if-gpon-0/2)#tcont bind-profile
{ portid<U><0,3> }:1PON PORT
{ ontid<U><0,63> }:3 ONT ASSIGNMENT
{ tcont-list<S><1,13> }:1 TCON-ID
{ profile-id<K>|profile-name<K> }:profile-id
{ profile-id<U><1,512> }:10 self assigned number by the commissioner
Command:
tcont bind-profile 1 3 1 profile-id 10
Binding a T-CONT profile succeeded

MA5600(config-if-gpon-0/2)#gemport add
{ portid<U><0,3> }:1 PON port
{ gemportid<K>|gemport-num<K> }:gemportid

{ gemportlist<S><3,159> }:301 Given by the data plan assigned for internet services
{ service-type<E><eth,tdm> }:eth
{ <cr>|encrypt<K> }:
Command:
gemport add 1 gemportid 301 eth
Adding a GEM port succeeded
MA5600(config-if-gpon-0/2)#ont gemport bind
{ portid<U><0,3> }:1
{ ontid<U><0,63> }:3
{ gemport-list<S><3,159> }:301
{ tcont-id<U><0,7> }:1
{ priority-queue<U><0,7> }:0
Command:
ont gemport bind 1 3 301 1 0
The GEM port(s) bind the T-CONT successfully
MA5600(config-if-gpon-0/2)#ont gemport mapping
{ portid<U><0,3> }:1
{ ontid<U><0,63> }:3
{ gemportid<U><128,3999> }:301
{ fe<K>|ge<K>|moca<K>|vlan<K>|priority<K>|iphost<K>|e1<K> }:vlan
{ vlan-id<U><0,4095> }:11 User VLAN for internet
{ <cr>|priority<K> }:
Command:
ont gemport mapping 1 3 301 vlan 11
Add the GEM port mapping successfully
MA5600(config-if-gpon-0/2)#ont port vlan
{ portid<U><0,3> }:1
{ ontid<U><0,63> }:3
{ iphost<K>|fe<K>|ge<K>|moca<K> }:fe
{ vlanid<U><0,4095> }:11 User VLAN for internet
{ ont-portlist<S><1,100> }:0
Command:
ont port vlan 1 3 fe 11 0
Add ports to the VLAN, total: 1, discarded: 0, success: 1, failed: 0

MA5600(config-if-gpon-0/2)#ont port native-vlan


{ portid<U><0,3> }:1
{ ontid<U><0,63> }:3
{ iphost<K>|fe<K>|ge<K>|moca<K> }:fe
{ ont-portid<U><0,31> }:0
{ vlan<K>|priority<K> }:vlan
{ vlanid<U><0,4095> }:11 User VLAN for internet

{ <cr>|priority<K> }:
Command:
ont port native-vlan 1 3 fe 0 vlan 11
Setting the native VLAN for the specified port succeeded
MA5600(config)#service-port vlan 1284 gpon 0/2/1 gemport 301 multi-service user-vlan 11 rx-cttr 25
tx-cttr 25
MA5600(config)#display ont resume resource
the resource of ont config resume : resume
MA5600(config)#ont resume resource resume
MA5600(config)#interface gpon 0/2
MA5600(config-if-gpon-0/2)#display ont info 1 3
-----------------------------------------------------------------------------F/S/P
: 0/2/1
ONT-ID
:3
Control flag : active
Run state
: up
Config state : normal
Match state : match
DBA type
: SR
Loop mode
: disable
Ont Profile ID : 127
Authentic type : SN-auth
SN
: 2011-CEE4A840
Description : group_3_ONT
--------------------------------------------------------------------------------------------------------------------------T-CONT-ID T-CONT profile Alloc-ID
---------------------------------------------0
1
3
1
10
259
---------------------------------------------MA5600(config-if-gpon-0/2)#display ont state
{ portid<U><0,3> }:1
{ ontid<U><0,63> }:3
Command:
display ont state 1 3
---------------------------------------------------------------------------F/S/P ONT-ID Control
Run Config Match
DBA Loop
Flag
State State State
Type Mode
---------------------------------------------------------------------------0/ 2/1 3 active
up normal match
SR
disable
----------------------------------------------------------------------------

You might also like