SHALEDRILLER 1000
Drawworks:
I.C. Drilling ICD-1000 Drawworks 1000HP powered by (1) Amerimex 1000HP AC Motor
B.O.P. Equipment:
BOP Handling System 36T Control Flow (1) 11" 5M Annular Control Flow (1) 11" 10M Single Ram Control Flow (1) 11" 10M Double Ram Control Flow 2-1/16" x 4-1/16" 5,000 psi Choke Manifold
Max Drilling Depth:
15,000
Mast:
Hydraulically Raised Double Mast 108 Clear Height; 500,000 lbs. HL Hydraulically Raised Triple Mast 1386 Clear Height; 500,000 lbs. HL
Generators:
(3) Cat C32 Engines with (3) SR4B Generators "Dual Fuel"
Substructure:
ICD Parallelogram Sub with ICD Walking Shoe System 22 ft. height Drill Floor - 18 4 ft. clear height, Rotary Capacity, 350,00 lbs. Setback Capacity, 14,500 Racking Capacity
VFD House:
I.C. Drilling VFD House
Mud System:
800 Bbl Circulating Mud System (2) Derrick linear motion shale shakers (1) Derrick (16) cone Desilter (1) Derrick (3) cone Desander (1) Derrick Vacu-Flo 1200 Vacuum Degasser Mud Gas Separator 1200 gpm 48" diameter and 16' overall length
Mud Pumps:
2) FB-1600 HP Triplex Pumps
Power:
(1) each pump Amerimex A/C 1500 HP Motors
Rotating and Traveling Equipment:
CANRIG 6027 275 Ton Capacity 105rpm Torque AC Top Drive Hacker 27-1/2" Rotary Table Independent Drive powered by 150HP Hydraulic Power Unit American Block 250 ton Traveling Block
Pipe Handling Equipment:
ALCO Smart Iron Roughneck System Conventional / Hydraulic Cat Walk and V-Door System
Drillers Cabin:
I.C. Drilling Climate Control Driller's Cabin with Joystick Controls
Drill Pipe and Drill Collars:
15,000' of 4-1/2" Drill Pipe (8) 6-1/2" Drill Collars
SHALEDRILLER 1600
Drawworks:
I.C. Drilling ICD-1600 Drawworks powered by (1) Amerimex 1600HP AC Motor
Max Drilling Depth:
20,000
Mast:
I.C. Drilling Hydraulically Raised Mast 143' Clear Height 750,000 lbs. HL Rotary Capacity 500,00 lbs. Setback Racking Capacity 19,500'
Substructure:
ICD Parallelogram Sub with ICD Walking Shoe System 100 Series Rigs vertically raised, 200 Series parallelogram raised 26' height drill oor 22.5' clear height
Mud Pumps:
(2) FB-1600 HP Triplex Pumps
Power:
(1) each pump Amerimex A/C 1500 HP Motor
Rotating and Traveling Equipment:
NOV TDS-11 Top Drive 500 Ton with 37,500 ft-lbs Torque @ 110 rpm Hacker 37-1/2" Rotary Table powered by high torque 97.63 cu Hydraulic Motor American Block 400 ton Traveling Block
B.O.P. Equipment:
BOP Handling System 36T Control Flow (1) 13-5/8" 5M Annular Control Flow (1) 13-5/8" 10M Single Ram Control Flow (1) 13-5/8" 10M Double Ram Control Flow 4-1/16" X 4-1/16" 10,000 psi Choke Manifold
Generators:
(3) Cat 3512 Diesel Engines with (3) Kato 1750 kVa Generators "Dual Fuel"
VFD House:
I.C. Drilling VFD House
Mud System:
1000 Bbl Circulating Mud System (2) Derrick linear motion shale shakers (1) Derrick (16) cone Desilter (1) Derrick (3) cone Desander (1) Derrick Vacu-Flo 1200 Vacuum Degasser All solids Control Equipment mounted on a one load hydraulically raised equipment skid. Mud Gas Separator 1200 gpm 48" diameter and 16' overall length
Pipe Handling Equipment:
NOV ST-80C Iron Roughneck Hydraulic Cat Walk System
Drillers Cabin:
I.C. Drilling Climate Control Driller's Cabin with Joystick Controls
Drill Pipe and Drill Collars:
20,000' of 5" 19.50 S135 Drill Pipe (21) 7" Drill Collars with NC-50 Connections (4) 8" Drill Collars with NC-56 Connections
INDEPENDENCE CONTRACT DRILLING
Steve Hale
President and Chief Operating Of cer 200 NW 66th Street, Suite 925 Oklahoma City, OK 73116 Email:
[email protected] Cell: (405) 740-9200 Main: (405) 848-2636 Fax: (405) 848-2439
Byron Dunn
Chief Executive Of cer 11601 N. Galayda Houston, TX 77086 Email: [email protected] Cell: (281) 686-7392 Main: (281) 598-1230 Fax: (832) 645-0295
www.icdrilling.com
