Scribd
Upload
107 views

Ndiswrapper

The document provides instructions for installing the Ndiswrapper driver and Engenius EUB-362 wireless network adapter on Linux. It instructs the user to download and install Ndiswrapper, extract the EUB-362 driver files, install the driver with Ndiswrapper, check the device ID, configure Ndiswrapper to use the driver, load the bootloader, bind the adapter to wlan0, and use iwconfig to configure wireless settings. Additional clarification is provided for some steps.

Uploaded by

Ventas Premiumsrl
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
107 views

Ndiswrapper

The document provides instructions for installing the Ndiswrapper driver and Engenius EUB-362 wireless network adapter on Linux. It instructs the user to download and install Ndiswrapper, extract the EUB-362 driver files, install the driver with Ndiswrapper, check the device ID, configure Ndiswrapper to use the driver, load the bootloader, bind the adapter to wlan0, and use iwconfig to configure wireless settings. Additional clarification is provided for some steps.

Uploaded by

Ventas Premiumsrl
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

How To Install Ndiswrapper And Engenius Eub-362 Ext Driver Please guide me with my questions in brackets with the

instructions given by Kee nan Systems. Thank you very much. I am new to Linux and appreciate your help. Arthur Download build and and install version 1.6 or later of the ndiswrapper here: htt p://pkgs.org/ubuntu-12.04/ubuntu-universe-i386/ndiswrapper-dkms_1.57-1ubuntu1_al l.deb/download/ ( I am assuming I have to unrar this file using a Linux command using tar - zxvf ndiswrapper-version.tar.gz) You will need the eub-362 drivers and bootloader files here ( I unrarred this zip file and made a separate directory on my flash drive. Will the command "ndiswrapper - net5523.inf find the directory on my flash drive or do I have to copy the files to which directory on my hard drive ?) install the eub driver with the command ndiswrapper -i net5523.inf plug in your eub-362 modprobe ndiswrapper (Does this command create the line below cat ?) cat /proc/bus/usb/devices note the vendor id and product id ( does this command give me the id number and product id ?) tell ndiswrapper to use the driver on the eub-362 (Where will this directory of files reside /) vendorid ( What does this commend do and mean ?) serial number ndiswrapper -d 0cf3:0001:0.01

load the bootloader (put this step into your startup it must be issued each time the eub is inserted) (Where is the startup to issue this command ? Also if the EUB-362 is always conn ected I assume that I don't have to issue this command. ) vendor id prodid load_fw_ar5523 ar5523.bin 0cf3 0002

bind the eub362 to wlan0 ndiswrapper -d wlan0 net5523

Issue iwconfig command you should now see the eub362 as wlan0 and can configure in the usual way. Where do I issue the command iwconfig ? Thank you very much. Arthur ******************** Ubuntu + Engenius EUB-362 EXT [SOLVED] Posted by Kelvin on 10 Feb 2010 at 06:13 pm | Tagged as: programming, Ubuntu Recently bought an Engenius Wireless LAN USB adapter EUB-362 EXT. There are a number of postings on Ubuntu Forums about trying to get this working on Ubuntu, with no avail. Keenan Systems from whom I bought the adapter has an out-dated howto for getting it working on Ubuntu. Here are the definitive steps to getting it working on Ubuntu 9.04. May work wit h other Ubuntu versions too. sudo apt-get install ndiswrapper-common ndiswrapper-utils-1.9 cd /tmp wget http://www.engeniustech.com/resources/EUB862_362_XPV2.1.zip unzip EUB862_362_XPV2.1.zip wine EUB862_362_XPV2.1.exe Run the driver installation using wine. Then.. cd ~/.wine/drive_c/windows/system32 sudo ndiswrapper -i net5523.inf Connect EUB-362 to your computer. ndiswrapper -l should produce net5523 : driver installed device (0CF3:0002) present That's it. Enjoy your new wlan adapter!

You might also like