WWW.CABLEJOINTS.CO.

UK

THORNE & DERRICK UK

SX Range BPG Range BPGA Range ZAG Range High Voltage Fire Rated ZP Range Specials Technical

TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK

1 2 3 4 5 6 7 8 9

Glass Reinforced Polyester Enclosures

BPG

BPG
Glass Reinforced Polyester Enclosures
The BPG range comprises 16 sizes of enclosure manufactured in glass reinforced polyester (GRP). This material is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates, bacteria and enzymes. It is also suitable for LSOH (low smoke zero halogen) applications.
BPG Range

This is demonstrated by the fact that the BPG range when fitted with ceramic terminals meets the requirements of IEC 331 (750C for 3 hours) and also BS6387/1983 (950C for 3 hours - flame only). Further information about this testing procedure can be found in Section 6 of this catalogue.

Polyester gives excellent mechanical strength and life expectancy. The wall thickness is sufficient to allow tapped entry holes to be machined in the walls of the enclosure and it provides a very good alternative to aluminium or cast iron.

Due to the enclosure's labyrinth seal system, whereby the seal is protected from external forces, the BPG range has excellent ingress protection qualities which mean that the enclosures are tested to and passed IP66/67. They have also undergone and passed the Shell/ERA deluge test which was devised to adequately test enclosures and electrical equipment which is routinely subjected to ship decks conditions or fire deluge systems. The mounting holes, although contained within the profile of the enclosure, sit outside the seal and all external fasteners and fixings are manufactured from 316 grade stainless steel to ensure reliability.

ABTECH mould the BPG range from SMC material rather than DMC which is the most common form of GRP. In this method the glass reinforcement takes the form of sheets rather than short strands. This gives much greater mechanical strength and also in the event of the enclosure being exposed to fire conditions the structure holds together even if the resin is depleted due to the elevated temperatures.

42

BPG
Glass Reinforced Polyester Enclosures
The BPG range has many features which lend itself to a whole host of applications including both industrial and hazardous area junction boxes, OEM applications, fire protection systems, tunnel wiring etc. The BPG range can be machined, drilled, tapped with various thread forms, painted and of course it can be moulded in a variety of colours which gives a much improved durability of colour over painting. The BPG and BPGC enclosures are suitable for use in hazardous areas and can be supplied with a number of certificates, specifically ATEX EEx'e' to BS EN 50019 (zone 1 & 2) EEx'nA' to BS EN50021 (zone 2) and NEMA 4X (CSA, UL & FM class 1, div 2).

SX Range BPG Range BPGA Range ZAG Range High Voltage Fire Rated ZP Range Specials Technical

1 2 3 4 5 6 7 8 9
43

The BPG range can be supplied fitted with any component approved terminal to apparatus level or can be supplied empty as component approved for the clients own certification requirements.

BPG Range Features The BPG range is also available carbon loaded (BPGC) which helps to reduce the surface resistance of the material and consequently reduce the risk of spark from static build up. Earthing can be accomplished by various means. Internal / external earth stud which in turn can be connected to the terminal mounting rail or component mounting plate, an earth continuity plate (ECP) can be fitted around the inner walls to provide continuity for cable glands and various rail mounted earth terminals or proprietary earth bars can be fitted inside the enclosure. When fitted with a standard neoprene gasket the enclosure is suitable for ambient temperatures of - 40C to + 80C. Alternatively, when fitted with an optional silicone gasket the temperature range is increased to -70C to +130C. For certified apparatus contact the ABTECH Sales department for ambient operating temperatures. Wide Operating Temperature (- 70C to + 130C) Ingress Protection up to IP68 Fire Resistant to IEC331 Impact Resistant > 7Nm UV Resistant Can be drilled and tapped to accommodate most thread forms (NPT for example) Certification for use in Zone 1 and 2 UL, CSA, ATEX and GOST Approvals Ideal for Petrochemical and Marine applications

BPG
Glass Reinforced Polyester Enclosures
Accessories and Options The following table is a list of the available accessories suitable for a particular size of BPG enclosure. Care should be taken when ordering accessories for use with enclosures intended for hazardous areas to ensure that compliance with certification is retained.

EC - Earth Continuity Plate

MP - Component Mounting Plate

BPG Range

TP - Tamper Proof Screws

MF - External Mounting Feet

AS - Allen Head Fixing Screws

EH - External Hinges

SG - Silicone Gasket (see note 3)

BPG1 BPG2 BPG3 BPG4 BPG4.5 BPG5 BPG6 BPG7 BPG8 BPG9 BPG10 BPG11 BPG12 BPG13 BPG14 BPG15

80 110 160 190 190 230 122 220 160 260 360 560 255 400 600 400

75 75 75 75 75 75 120 120 160 160 160 160 250 250 250 405

55 55 55 55 75 50 90 90 90 90 90 90 120 120 120 120

Ordering Example;

BPG8 EX EC EB MR
(BPG8 EX Certified with Earth Continuity Plate, Internal Earthing Bar and DIN standard Mounting Rail) 1. Carbon loading gives a surface tracking value of between 10M and 10G. Surface colour is black. 2. EEx'e' certification may be component or apparatus certified - please specify your requirements. 3. Silicone gasket increases temperature rating (-70 to +130 C) and may increase the working life in some applications. 4. Radio Frequency Interference (RFI) gasket may reduce IP rating. Enclosure may also be internally coated with RFI material.

44

RF - RFI Protection (see note 4)

C - Carbon Loaded (see note 1)

MR - DIN Standard Mounting Rail

EX - Ex Certified (see note 2)

EB - Internal Earthing Bar

ES - Earth Stud

Part Number

Length (mm)

Depth (mm)

Width (mm)

BPG
Glass Reinforced Polyester Enclosures

SX Range BPG Range BPGA Range ZAG Range High Voltage Fire Rated ZP Range Specials Technical
External mounting feet (stainless steel 316) Internal Earthing bar (can be fitted with clamps) DIN standard mounting rail (TS15, TS32 or TS35) Tamper-proof screws External hinges Component mounting plate (tufnol as standard, steel an option) Copper earth continuity plate (must also be fitted with earth stud) Earth Stud (either brass or stainless steel) Allen Head fixing screws (grade 316)

1 2 3 4 5 6 7 8 9
45

BPG

Glass Reinforced Polyester Enclosures

46
BPG Range

BPG 1 / BPGC 1 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 1 / BPGC 1 Specifications Terminal Populations

Maximum Number of Rows Weidmuller BK4 (4 way) 0 M25 M32 M40 0 0 1 0 0 0 0 Side A-C Side B-D 0 0 0 0 0 0 8 4 0 0 264-134 (4) 262-132 (2) 0 0 0
High Voltage ZAG Range BPGA Range BPG Range SX Range

Entry Matrix
1 Entry Size M16 M20 0 0 0 1 0 1 1 Side A-C Side B-D

Width Wago 1 1 280-999 281-691 281-992 281-993 282-691 284-691 283-691 285-691 280-998 281-998 264-120 264-220 0 0 0 264-132 (2) 0 1 1 0 0 0 0 0 0 0 280-992

80mm

Length

75mm

Depth BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 M16/12 M35/16
Fire Rated

55mm

BPG1 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC1 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
50 x 36mm 26 x 30mm

Weight

230g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 1 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

0 262-134 (4) 0

GOST-R Ex'e (Zone 1 & 2)

Power Rating

8.390W

Technical

Specials

ZP Range

Glass Reinforced Polyester Enclosures

BPG

47

BPG

Glass Reinforced Polyester Enclosures

48
BPG Range

BPG 2 / BPGC 2 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 2 / BPGC 2 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 0 M25 M32 M40 0 0 2 0 0 0 0 0 0 0 0 0 0 12 7 2 1 264-134 (4) 262-132 (2) 0 0 0
High Voltage ZAG Range BPGA Range BPG Range SX Range

Terminal Populations
1 Wago 2 1 280-999 281-691 281-992 281-993 282-691 284-691 283-691 285-691 280-998 281-998 264-120 264-220 0 0 0 264-132 (2) Side B-D Side A-C 1 1 1 1 0 0 0 0 0 0 280-992 M20 0 0 0 2 0 M16 3 1 Entry Size Side A-C Side B-D

Entry Matrix

Width

110mm

Length

75mm

Depth BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 M16/12 M35/16
Fire Rated

55mm

BPG2 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC2 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
80 x 36mm 26 x 30mm

Weight

230g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 2 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

2 262-134 (4) 1

GOST-R Ex'e (Zone 1 & 2)

Power Rating

8.551W

Technical

Specials

ZP Range

Glass Reinforced Polyester Enclosures

BPG

49

BPG

Glass Reinforced Polyester Enclosures

50
BPG Range

BPG 3 / BPGC 3 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 3 / BPGC 3 Specifications Terminal Populations

Maximum Number of Rows Weidmuller BK4 (4 way) 0 M25 M32 M40 Side A-C Side B-D 0 0 3 0 0 0 0 0 0 0 0 0 0 19 11 4 264-132 (2) 264-134 (4) 0 0 0 0
High Voltage ZAG Range BPGA Range BPG Range SX Range

Entry Matrix
1 Entry Size M16 M20 0 0 0 4 0 5 1 Side A-C Side B-D

Width Wago 3 2 280-999 281-691 281-992 281-993 282-691 284-691 283-691 285-691 280-998 281-998 264-120 264-220 0 0 1 2 2 1 0 0 0 0 0 0 280-992

160mm

Length

75mm

Depth BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 M16/12 M35/16
Fire Rated

55mm

BPG3 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC3 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
130 x 36mm 27 x 29mm

Weight

405g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 3 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

3 262-132 (2) 262-134 (4) 4 3

GOST-R Ex'e (Zone 1 & 2)

Power Rating

8.833W

Technical

Specials

ZP Range

Glass Reinforced Polyester Enclosures

BPG

51

BPG

Glass Reinforced Polyester Enclosures

52
BPG Range

BPG 4 / BPGC 4 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 4 / BPGC 4 Specifications Terminal Populations

Maximum Number of Rows Weidmuller BK4 (4 way) BK6 ( 6 way) M32 M40 0 0 BK12 (12 way) MK6/3 MK6/4 Side A-C Side B-D MK6/6 SAK2.5 SAK4 SAK6N SAK10 SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 M16/12 M35/16
Fire Rated

Entry Matrix
1 Entry Size M16 0 0 0 0 0 0 0 0 0 0 0 25 15 5 3 M25 4 0 0 0 M20 5 0 6 1 Side A-C Side B-D

Width Wago 4 2 280-999 281-691 281-992 281-993 282-691 284-691 283-691 285-691 280-998 281-998 264-120 264-220 0 0 0 0 0 0
High Voltage ZAG Range BPGA Range BPG Range SX Range

190mm

Length 280-992

75mm

Depth

55mm

BPG4 - Glass Reinforced Polyester (RAL7001 grey) 1 3 3 2 0 0 0 0 0 0

Material

BPGC4 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
160 x 36mm 27 x 30mm

Weight

450g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 4 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

264-132 (2) 264-134 (4) 262-132 (2) 262-134 (4)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

5 3

GOST-R Ex'e (Zone 1 & 2)

Power Rating

9.012W

Technical

Specials

ZP Range

Glass Reinforced Polyester Enclosures

BPG

53

BPG

Glass Reinforced Polyester Enclosures

54
BPG Range

BPG 4.5 / BPGC 4.5 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 4 .5/ BPGC 4.5 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 28 0 24 0 0 Side A-C Side B-D 0 0 0 0 28 24 25 15 6 4 264-134 (4) 262-132 (2) 262-134 (4) 15 12 0 6 4 M40 0 M32 3 M25 4 0 0 0 BK6 ( 6 way) 3 1 3 3 2 25 25 19 17 0 0 264-220 30 25 19 264-132 (2) 264-120 281-998 280-998 285-691 283-691 284-691 282-691 281-993 281-992 281-691 BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 280-999 4 280-992 M20 6 0 Wago M16 12 1 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

190mm

Length

75mm

Depth

75mm

BPG4.5 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC4.5 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
55 x 160mm 52 x 19mm

Weight

529g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 4.5 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

9.260W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

55

BPG

Glass Reinforced Polyester Enclosures

56
BPG Range

BPG 5 / BPGC 5 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 5 / BPGC 5 Specifications Terminal Populations

Maximum Number of Rows Weidmuller BK4 (4 way) 0 M25 M32 M40 0 0 0 0 0 0 0 0 0 0 0 0 0 32 19 6 4 264-134 (4) 262-132 (2) 0 0 0
High Voltage ZAG Range BPGA Range BPG Range SX Range

Entry Matrix
1 Entry Size M16 M20 0 0 0 4 0 6 1 Side A-C Side B-D

Width Wago 0 4 280-999 281-691 281-992 281-993 282-691 284-691 283-691 285-691 280-998 281-998 264-120 264-220 0 0 0 264-132 (2) Side B-D Side A-C 2 4 4 2 0 0 0 0 0 0 280-992

230mm

Length

75mm

Depth BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 SAK16 SAK35 Entrelec MA2.5/5 M4/6 M6/8 M10/10 M16/12 M35/16
Fire Rated

55mm

BPG5 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC5 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
90 x 30mm 23 x 28mm

Weight

529g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 5 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

6 262-134 (4) 4

GOST-R Ex'e (Zone 1 & 2)

Power Rating

9.260W

Technical

Specials

ZP Range

Glass Reinforced Polyester Enclosures

BPG

57

BPG

Glass Reinforced Polyester Enclosures

58
BPG Range

BPG 6 / BPGC 6 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 6 / BPGC 6 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 15 15 13 13 13 Side A-C Side B-D 10 8 6 0 15 13 13 8 3 2 264-134 (4) 262-132 (2) 262-134 (4) 7 5 3 2 8 M40 1 M32 1 M25 2 1 0 0 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 8 14 17 264-220 264-132 (2) 5 264-120 7 281-998 8 280-998 10 285-691 13 283-691 14 284-691 1 282-691 1 281-993 1 281-992 1 281-691 2 280-999 2 280-992 M20 4 2 Wago M16 6 3 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

122mm

Length

120mm

Depth

90mm

BPG6 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC6 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
75 x 60mm 54 x 53mm

Weight

750g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 6 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

9.378W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

59

BPG

Glass Reinforced Polyester Enclosures

60
BPG Range

BPG 7 / BPGC 7 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 7 / BPGC 7 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 34 34 29 M40 3 29 29 Side A-C Side B-D 22 18 15 0 34 29 30 18 6 4 264-134 (4) 262-132 (2) 262-134 (4) 15 11 6 4 18 M32 3 M25 4 1 0 0 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 22 30 36 264-220 264-132 (2) 11 264-120 15 281-998 18 280-998 22 285-691 28 283-691 * 30 284-691 * 2 282-691 4 281-993 * 4 281-992 2 281-691 3 280-999 * 5 280-992 M20 9 2 Wago M16 14 3 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

220mm

Length

120mm

Depth

90mm

BPG7 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC7 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
180 x 60mm 56 x 53mm

Weight

1060g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 7 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

10.500W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

61

BPG

Glass Reinforced Polyester Enclosures

62
BPG Range

BPG 8 / BPGC 8 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 8 / BPGC 8 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 22 22 19 19 19 15 Side B-D 12 10 0 22 19 20 12 4 3 264-134 (4) 262-132 (2) 262-134 (4) 10 7 4 2 12 Side A-C M40 1 M32 2 M25 3 2 1 0 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 15 20 24 264-220 264-132 (2) 7 264-120 10 281-998 12 280-998 15 285-691 19 283-691 * 20 284-691 * 1 282-691 2 281-993 2 281-992 1 281-691 2 280-999 3 280-992 M20 6 4 Wago M16 8 6 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

160mm

Length

160mm

Depth

90mm

BPG8 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC8 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
108 x 65mm 78 x 58mm

Weight

1060g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 8 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

10.348W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

63

BPG

Glass Reinforced Polyester Enclosures

64
BPG Range

BPG 9 / BPGC 9 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 9 / BPGC 9 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 40 40 34 34 34 27 Side B-D 21 18 0 40 34 36 21 7 5 264-134 (4) 262-132 (2) 262-134 (4) 18 14 7 5 22 Side A-C M40 3 M32 4 M25 6 2 1 0 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 27 36 43 264-220 264-132 (2) 14 264-120 18 281-998 22 280-998 27 285-691 34 283-691 * 36 284-691 * 3 282-691 4 281-993 4 281-992 2 281-691 4 280-999 6 280-992 M20 12 4 Wago M16 16 6 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

260mm

Length

160mm

Depth

90mm

BPG9 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC9 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
210 x 65mm 80 x 60mm

Weight

1170g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 9 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

11.933W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

65

BPG

Glass Reinforced Polyester Enclosures

66
BPG Range

BPG 10 / BPGC 10 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 10 / BPGC 10 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 58 58 50 50 50 39 Side B-D 31 26 0 58 50 52 31 11 7 264-134 (4) 262-132 (2) 262-134 (4) 26 20 10 7 32 Side A-C M40 4 M32 5 M25 9 2 1 0 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 40 52 63 264-220 264-132 (2) 20 264-120 26 281-998 32 280-998 40 285-691 48 283-691 * 52 284-691 * 4 282-691 6 281-993 6 281-992 3 281-691 6 280-999 9 280-992 M20 18 4 Wago M16 22 6 1 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

360mm

Length

160mm

Depth

90mm

BPG10 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC10 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
312 x 65mm 82 x 60mm

Weight

2150g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 10 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

13.793W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

67

BPG

Glass Reinforced Polyester Enclosures

68
BPG Range

BPG 11 / BPGC 11 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 11 / BPGC 11 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 96 96 82 82 82 Side A-C Side B-D 63 51 42 0 96 82 85 51 18 12 264-134 (4) 262-132 (2) 262-134 (4) 43 32 17 12 51 M40 8 M32 8 M25 14 2 1 0 BK6 ( 6 way)
BK12 (12way)

Terminal Populations
1 Wago 14 10 280-999 281-691 281-992 281-993 282-691 284-691 * 283-691 * 285-691 280-998 281-998 264-120 264-220 101 85 64 264-132 (2) 5 11 11 7 85 78 64 51 43 32 280-992 M20 24 4 M16 36 6 Entry Size Side A-C Side B-D

Entry Matrix

Width

560mm

Length

160mm

Depth

90mm

BPG11 - Glass Reinforced Polyester (RAL7001 grey) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 *

Material

BPGC11 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
242 x 65mm (x 2) 80 x 60mm

Weight

3200g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 11 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

18.338W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

69

BPG

Glass Reinforced Polyester Enclosures

70
BPG Range

BPG 12 / BPGC 12 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 12 / BPGC 12 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 78 78 66 66 66 Side A-C Side B-D 52 42 17 12 78 66 70 42 14 10 14 262-132 (2) 262-134 (4) 36 26 8 42 M40 4 M32 5 M25 10 8 4 3 BK6 ( 6 way)
BK12 (12 way)

Terminal Populations
2 Wago 12 8 280-999 281-691 281-992 281-993 282-691 284-691 * 283-691 * 285-691 280-998 281-998 264-120 264-220 84 70 54 264-132 (2) 264-134 (4) 4 8 8 6 70 66 54 42 36 26 280-992 M20 15 12 M16 24 18 Entry Size Side A-C Side B-D

Entry Matrix

Width

255mm

Length

250mm

Depth

120mm

BPG12 - Glass Reinforced Polyester (RAL7001 grey) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 *

Material

BPGC12 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
205 x 90mm 170 x 85mm

Weight

3200g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 12 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

15.474W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

71

BPG

Glass Reinforced Polyester Enclosures

72
BPG Range

BPG 13 / BPGC 13 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 13 / BPGC 13 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 132 132 114 114 114 Side A-C Side B-D 88 70 29 20 132 114 118 70 24 16 264-134 (4) 262-132 (2) 262-134 (4) 60 44 24 16 72 M40 6 M32 8 M25 18 8 4 3 BK6 ( 6 way)
BK12 (12 way)

Terminal Populations
2 Wago 20 14 280-999 281-691 281-992 * 281-993 282-691 284-691 * 283-691 * 285-691 280-998 281-998 264-120 264-220 140 118 88 264-132 (2) 6 14 14 10 118 108 88 72 60 44 280-992 M20 26 12 M16 39 18 Entry Size Side A-C Side B-D

Entry Matrix

Width

400mm

Length

250mm

Depth

120mm

BPG13 - Glass Reinforced Polyester (RAL7001 grey) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 *

Material

BPGC13 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
350 x 89mm 170 x 84mm

Weight

3650g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 13 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

20.867W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

73

BPG

Glass Reinforced Polyester Enclosures

74
BPG Range

BPG 14 / BPGC 14 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 14 / BPGC 14 Specifications

Maximum Number of Rows Weidmuller BK4 (4 way) 132 132 114 114 114 Side A-C Side B-D 88 70 29 20 132 114 118 70 24 16 264-134 (4) 262-132 (2) 262-134 (4) 92 70 24 16 110 M40 8 M32 10 M25 24 8 4 3 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 138 182 218 264-220 264-132 (2) 70 264-120 92 281-998 110 280-998 138 285-691 * 168 283-691 * 182 284-691 * 14 282-691 22 281-993 22 281-992 * 12 281-691 22 280-999 30 280-992 M20 36 12 Wago M16 60 18 2 Entry Size Side A-C Side B-D

Terminal Populations

Entry Matrix

Width

600mm

Length

250mm

Depth

120mm

BPG14 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC14 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
260 x 90mm (x 2) 168 x 85mm

Weight

5235g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 14 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

30.384W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

75

BPG

Glass Reinforced Polyester Enclosures

76
BPG Range

BPG 15 / BPGC 15 Drawing

All blue dimensions in mm, all green dimensions in decimal inches (drawing not to scale)

BPG 15 / BPGC 15 Specifications

Terminal Populations
Maximum Number of Rows Weidmuller BK4 (4 way) 198 198 171 171 171 Side A-C Side B-D 132 105 58 40 198 171 177 101 36 24 262-132 (2) 262-134 (4) 108 90 66 36 24 M40 6 M32 8 M25 18 16 7 5 BK6 ( 6 way) BK12 (12 way) MK6/3 MK6/4 21 15 177 162 132 108 90 66 264-220 210 177 132 264-132 (2) 264-134 (4) 264-120 281-998 280-998 285-691 * 283-691 * 284-691 * 282-691 MK6/6 SAK2.5 SAK4 SAK6N SAK10 * SAK16 * SAK35 * Entrelec MA2.5/5 M4/6 M6/8 M10/10 * M16/12 * M35/16 * 281-993 21 281-992 * 9 281-691 21 280-999 30 280-992 M20 26 20 Wago M16 39 33 2 Entry Size Side A-C Side B-D

Entry Matrix

Width

400mm

Length

405mm

Depth

120mm

BPG15 - Glass Reinforced Polyester (RAL7001 grey)

Material

BPGC15 - Carbon Loaded Glass Reinforced Polyester (Black)

Drilling Envelope
352 x 89mm 327 x 84mm

Weight

5580g

IP Rating

66/67

-40 to 80 C (standard neoprene gasket)

Temperature

-70 to 130 C (silicone gasket)

ATEX EEx'e' BS EN 50019 (Zone 1 & 2)

BPG 15 Photo

ATEX EEx'nA' BS EN 50021 (Zone 2)

Certification

NEMA 4X (CSA, UL & FM (class 1 division 2)

GOST-R Ex'e (Zone 1 & 2)

Power Rating

31.350W

* Care must be taken to ensure that the size of this enclosure can accommodate the cable bending radius.

Technical

Specials

ZP Range

Fire Rated

High Voltage

ZAG Range

BPGA Range

BPG Range

SX Range

Glass Reinforced Polyester Enclosures

BPG

77

BPG
Glass Reinforced Polyester Enclosures

BPG Range

WWW.CABLEJOINTS.CO.UK

THORNE & DERRICK UK

TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK

78