http://biz.lgservice.

com
SERVICE MANUAL

PORTABLE NAVIGATION SERVICE MANUAL

INFORMATION
If you have other questions about the Navigation Device, please contact your supplier or Technical Support:

MODEL : LN500/LN510

MARCH, 2007

MODEL : LN500/LN510

[CONTENTS]
SECTION 1. GENERAL
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 NAME OF EACH PART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 SUPPORT-HOTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7 SOFTWARE UPGRADE METHOD (OS IMAGE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

SECTION 2. ELECTRICAL SECTION

BLOCK DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 VOLTAGE SHEET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-6 SCHEMATIC DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7 PRINTED CIRCUIT DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29

SECTION 3. EXPLODED VIEWS

CABINET & MAIN FRAME SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

SECTION 4. REPLACEMENT PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

- 1-1 -

SECTION 1. GENERAL
SAFETY PRECAUTIONS
Electrostatically Sensitive Devices (ESD)
Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive Devices (ESD). Examples of typical ESD devices are integrated circuits and some field-effect transistors and semiconductor chip components. The following techniques should be used to help reduce the incidence of component damage caused by static electricity. 1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any electrostatic charge on your body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging wrist strap device, which should be removed for potential shock reasons prior to applying power to the unit under test. 2. After removing an electrical assembly equipped with ESD devices, place the assembly on a conductive surface such as aluminum foil, to prevent electrostatic charge buildup or exposure of the assembly. 3. Use only a grounded-tip soldering iron to solder or unsolder ESD devices. 4. Use only an anti-static solder removal device. Some solder removal devices not classified as "anti-static" can generate electrical charges sufficient to damage ESD devices. 5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ESD devices. 6. Do not remove a replacement ESD device from its protective package until immediately before you are ready to install it. (Most replacement ESD devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or comparable conductive materials). 7. Immediately before removing the protective material from the leads of a replacement ESD device, touch the protective material to the chassis or circuit assembly into which the device will by installed. CAUTION : BE SURE NO POWER IS APPLIED TO THE CHASSIS OR CIRCUIT, AND OBSERVE ALL OTHER SAFETY PRECAUTIONS. 8. Minimize bodily motions when handing unpackaged replacement ESD devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity sufficient to damage an ESD device).

CAUTION. GRAPHIC SYMBOLS

THE LIGHTNING FLASH WITH APROWHEAD SYMBOL. WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE SERVICE PERSONNEL TO THE PRESENCE OF IMPORTANT SAFETY INFORMATION IN SERVICE LITERATURE.

- 1-2 -

 SPECIFICATIONS
ITEM
OS CPU

SPECIFICATION
Win CE 5.0 Centrality Atlas-II ARM9 276 Mhz

REMARK

MEMORY

LN500B : 256 MB LN500/505 : 512 MB LN510 : 1 GB LN515 : 2 GB

Built-in Memory Built-in Memory External SD Card External SD Card LG Philps LCD

DISPLAY

3.5 inch TFT LCD Resolution 320 X 240 Backlight Touch Screen

LED type Analog resisitive type Typical 1.0W (1EA)

AUDIO GPS

Mono, Internal Speaker SiRF star III, Internal Antenna

NAVI MAP POWER TEMPERATURE

Full Map Navtaq DC 5.0 +/- 0.2V Operating : -10~60 C Storing : -30~80 C

Voice Guidance

Vehicle Power Cigar-jack Input (12V)

Built-in BATTERY

3.7 V (Li-Ion)

Typical 3-hours operation

INTERFACE

Mini-USB Port External GPS Jack (Optional)

USB 1.1

Multimedia

Electronic Picture Frame

BMP, JPG, GIF Files Compatible

- 1-3 -

 ACCESSORIES

Main Set

801 Quick Start Guide

825

USB Cable

826

SD Memory Card (Optional)

827

Cigar Light Adapter

828

AC Adapter

829 Carring Case

830 Suction-Mount Cradle

835 Installation CD

836 GPS aerial (Optional)

Contents may be changed without notices. SD memory card (Optional) The supplied SD Memory Card space may be insufficient after upgrade. In this case, another SD Memory Card that has bigger space has to be purchased..

- 1-4 -

 NAME OF EACH PART

Front panel

SRC

3
VOL

RESET

1. LCD 2. SRC (Source) button Move to the main menu screen or the previous screen. Power slee Entering power sleep mode. On : Press and hold. Off : Press and hold again. 3. Volume Up Increases the volume level.

4. Volume Down Decrease the volume level. 5. RESET hole If the unit fails to operate properly, press the reset button using a ball point pen or a similar tool.

To activate the menu function through the LCD screen, touch the LCD screen with a finger.

- 1-5 -

 Rear / Side panel

1

5 7

1. External GPS Antenna Slot 2. Speaker Gets a voice guidance service. 3. Docking connector 4. USB port

5. Memory Card Slot Insert a SD Memory Card. 6. Power Hold On / Off button On : Push button up. Off : Push button down. 7. Power supply connector Tiffical DC 5V

Deleting or altering the map data in the built-in memory or the SD memory card randomly, may cause problems in the navigation function.

- 1-6 -

 SUPPORT-HOTLINE
If you have other questions about the Navigation Device, please contact your supplier or Technical Support:

www.lge.com/support/software.jsp
For questions on products please visit our site or contact the Support Team. Monday-Fridays : 09 : 00 am - 6 : 00 pm
LG Subsidiary
LG Electronics ESPANA S.A. LG Electronics U.K. Ltd LG Electronics France

Country
SPAIN U.K. / IRELAND FRANCE

Service Number
902 500 234 0870 873 5454 0825-826-822 0825-825-592 01805 4737 84 39 199600099 +30-210-4800-564/8 801 11 200 900 070-233-557 32-70-233-557 0900-543-5454 36-06-40-545454 +359-070-1-5454 801 54 54 54 808-78-5454 0771 41 4379 8088 5758 0800 116 587 800 18 740 420 810 555 810 40 31 228 3542 420 810 555 810 421 850 111 154 1 800 643 156

LG Electronics Deutschland GmbH GERMANY LG Electronics Italia S.p.A LG Electronics Hellas S.A LG Electronics Benelux B.V ITALY GREECE BELGIUM LUXEMBOURG Netherlands

LG ELECTRONICS MAGYAR KFT HUNGARY Bulgaria LG Electronics Polska Sp. z.o.o LG Electronics Portugal, S,A LG Electronics Nordic AB POLAND PORTUGAL SWEDEN DENMARK FINLAND NORWAY AUSTRIA RUMANIA CZECH SLOVAKIA AUSTRALIA

Austria RUMANIA CZECH REPUBLIC LG Electonics Australia

- 1-7 -

 SOFTWARE UPGRADE METHOD (OS IMAGE)

1. Execute Atlas Mgr 5.0

2. Press and hold the VOL- button, push up the slide switch and press OPEN button, then INPUT window is activated. Keep pressing VOL- button until INPUT window is activated. 3. Input 1 on INPUT window and then press ENTER on keyboard. EBOOT is displayed on screen.

4. The log is created on USB Terminal and enter your selection is displayed, input u. Then press Update NK Image icon and file selection windows is displayed, select chain.lst file from OS IMAGE file.

5. Os image is downloaded, then disconnect USB cable after product is turned on.

The ways software upgrade for LAN-B360 two, OS IMAGE and MAP DATA. MAP is executed by DESTINATOR CONSOLE. (Refer to USER_GUIDE) - 1-8 -

Dont use ASTRON socket

SD I/F

SD_DAT<3:0>,SD_CLK SD_CMD, SD_CD

ADD : X_MA<12:0> DATA : X_MD<31:0> /CS, CLK, CKE, /WE, /CAS, /RAS

System Memory

BLOCK DIAGRAM

SYSTEM BLOCK DIAGRAM

USB 1.1
PWR Key CTRL Sleep/Wakeup CTRL Charging CTRL

USB_DM, USB_DP USB_ID, USB_VBUS

AD<0:7>, CLE, ALE WE, RE, RY_BY

NAND Flash

GPS RF & BB
NTRST, TDI, TDO TMS, TCK, SRST

X_GPS_TX X_GPS_RX

MICOM

SECTION 2. ELECTRICAL SECTION

- 2-1 SRC, VOL +/X_TXD1(DA_DATA) X_RXD1(AD_DATA) X_TFS1, X_SCLK1 Touch I/F

Atlas-II (Centrality SoC) (Arm9@276MHz)

JTAG

RGB (6:6:6), VDD, VCC, LED PWR, TOUCH X/Y

TFT LCD 3.5

X_TX0 X_RX0

Key I/F

UART For Debug

VDDPDN, VDDPRE VPLA, VPHA, I/O

Audio AMP

CODEC (WM9712)

PWR CTRL

ATT3216 (EN) Load S/W ON/OFF VDD_PRE (1.3V, 50mA) LT3407-2 Dual DC/DC (800mA/800mA) Load S/W
X_PWR_EN PULL UP

ATLAS-II Power
VPLA (1.2V, 1mA) VPLD (1.2V, 3mA)

DC Input (Max 5.5V) LDO1.2

Power Source Switch

VDDPDN (1.3V, 300mA) USB_VDDL( (1.3V, ?) IOVCC (3.3V, 50mA) XVDDIO (3.3V, 75mA) USB_VDDA (3.3V, 10mA) VSSTL (1.8V, 150mA) Follow SDRAM Voltage SDRAM (1.8V, 170mA) *Note 2

Sliding Switch

Charger(400mA)

Battery

POWER BLOCK DIAGRAM

AAT3686
VCC13 ON VCC18 ON (by micom)

- 2-2 Load S/W

VCC33_1 ON (by micom) SD_ON

Single DC/DC (600mA) ISL6273

SD Card (3,3V, 70mA) *Note 1 NAND Flash (3,3V, 60mA) *Note 3 LED(3.3V, 80mA), Debug (3.3V, 100mA)- SMC/Serial

AAT3221IJS (EN) LDO 3.3

GPS_ON

GPS (3,3V, 90mA) CODEC ( 3,3V, 30mA)

LDO 3.3
CODEC_ON

LDO 3.3 AAT3221IJS (EN)

LCD33 ON LCD50 ON

MICOM (3,3V, 20mA) VPHA(3.3V 2mA) GPS backup (3,3V,1mA) Typical 10uA @1.5V LCD (3,3V/5V, 25mA) *Note 4 LDO 5V, AME8804 adj
PA_ON

LDO 3.3 Boost, MAX1790

Audio AMP., 5V / 200mA (Typical 1W), Boost, MAX1554 Back Light (400mW, 5V / 80mA 6 LEDs)
BL_ON

140mA max

 SW BLOCK DIAGRAM

DT Navigation

DT PhotoViewer DT Source Menu

DT Setup

Volume Control

Programming Interface (Win32,COM,MFC,ATL)

Communication Interface (Winsock,RAS,TAPI)

GWES Kernel

Device Manager

File System Networking and Communicatio n System

DEVICE DRIVERS OAL LAN-B360 Hardware Platform

OAL : OEM Adaptation Layer GWES : Graphics, Windowing and Event Subsystem COM : Component Object Model MFC : Microsoft Foundation Class ATL : Active Template Library RAS : Remote Access Sever TAPI : Telephony Application Program Interface

- 2-3 -

Audio Power Amp IC701 NJM2070

Audio Codec IC601 WM9712

SDRAM 64Mbyte IC300,IC3001 K4S561633F-75

GPS Sirf III module CN200 NAND Flash 32Mbyte IC401 K9F5608U0M

CPU CONNECTION DIAGRAM

U-processor IC902 PIC16F72

ATLAS-II (REV.D) 276 MHz

SD card conn CN400 54-2108-9-R

- 2-4 USB I/F JK700 JTAG CN803

Debugger serial CN701

Front button Front LED SW801, 802, 803

TCON IC500 HS353163

LCD (3.5) + TOUCH CN501 Gamma IC501 AD8511

VCC

GPS BLOCK DIAGRAM

25X25 Patch Ant LDO

Rechargeable Battery

- 2-5 -

Flash

TX Data

RX Data RF IC Baseband IC SiRF III

RF Switch LNA

SAW Filter

 VOLTAGE SHEET
MAIN PCB
1. TEST VOLTAGE : DC 10.5~16V 2. CHECK METHOD : VR MIN(10.5V)/MAX(16V)
PART NAME C518 C519 C616 C627 C639 C633 C642 C904 C909 C902 C905 C1004 C1000 C1011 C1019 C1008 C1020 C1024 C1018 C1009 SPEC 10uF/50V 10uF/16V 10uF/16V 22uF/16V 10uF/16V 10uF/16V 10uF/16V 47uF/10V 22uF/6.3V 10uF/10V 47uF/10V 10uF/16V 10uF/16V 10uF/16V 10uF/16V 10uF/16V 10uF/17V 10uF/18V 10uF/19V 22uF/6.3V 10.5V 18.81 3.31 5.35 5.06 3.35 5.03 5.03 5.17 5.16 5.4 4.18 4.72 1.81 1.34 3.27 1.19 3.23 3.31 3.31 1.34 16V 18.82 3.31 5.36 5 3.35 5.01 5 5.17 5.17 5.41 4.18 4.7 1.8 1.35 3.28 1.19 3.23 3.31 3.31 1.33

GPS
1. TEST VOLTAGE : DC 10.5~16V 2. CHECK METHOD : VR MIN(10.5V)/MAX(16V)
PART NAME C121 C128 SPEC 10uF/16V 10uF/16V 10.5V 3.29 1.18 16V 3.3 1.18

- 2-6 -

 SCHEMATIC DIAGRAMS
CPU I/O SCHEMATIC DIAGRAM

2-7

2-8

 CPU POWER & CONFIGURATION SCHEMATIC DIAGRAM

2-9

2-10

 SDRAM SCHEMATIC DIAGRAM

2-11

2-12

 NAND FLASH & SD CARD SCHEMATIC DIAGRAM

2-13

2-14

 GPS SCHEMATIC DIAGRAM

2-15

2-16

 LCD POWER & CONNECTOR SCHEMATIC DIAGRAM

2-17

2-18

 CODEC & AMP SCHEMATIC DIAGRAM

2-19

2-20

 CONNECTOR SCHEMATIC DIAGRAM

2-21

2-22

 MICOM, KEY & LED SCHEMATIC DIAGRAM

2-23

2-24

 POWER RAIL SCHEMATIC DIAGRAM

2-25

2-26

 POWER SCHEMATIC DIAGRAM

2-27

2-28

 PRINTED CIRCUIT DIAGRAMS

MAIN P.C BOARD DIAGRAM (TOP SIDE)

2-29

2-30

 MAIN P.C BOARD DIAGRAM (BOTTOM SIDE)

2-31

2-32

 GPS P.C BOARD DIAGRAM (TOP SIDE)

GPS P.C BOARD DIAGRAM (BOTTOM SIDE)

2-33

2-34

SECTION 3. EXPLODED VIEW

CABINET & MAIN FRAME SECTION
281 450 282

NOTE) Refer to SECTION 4 REPLACEMENT PARTS LIST in order to look for the part number of each part.

450

A49 283 270

280 A46 A41 260

255

CABLE1

250

A40 251

3-1

3-2