Kathreins X-polarized adjustable electrical downtilt antennas offer the wireless carrier the ability to tailor polarization diversity
sites for optimum performance. Using variable downtilt, only a few models need be procured to accommodate the needs of widely varying conditions. Remotely controlled downtilt is available as a retrofitable option. 0-10 downtilt range. DC Grounded metallic parts for impulse suppression. Wideband vector dipole technology. Optional remote downtilt Control. Will accomodate future 3G / UMTS applications. General specifications:
Frequency range 17102200 MHz Impedance 50 ohms VSWR < 1.5:1 Intermodulation (2x20w) IM3: < -150 dBc Polarization +45 and -45 Front-to-back ratio >30 dB (co-polar) (180 30) >25 dB (total power) Maximum input power 300 watts per input (at 50C) Electrical downtilt 010 degrees continuously adjustable Connector 2 x 7-16 DIN female Isolation >30 dB Cross polar ratio Main direction 0 25 dB (typical) Sector 60 >10 dB Tracking, average 0.5 dB Squint 1.5 Weight 14.3 lb (6.5 kg) 18.7 lb (8.5 kg) clamps included Dimensions 51.7 x 6.1 x 2.8 inches (1314 x 155 x 70 mm) Wind load at 93 mph (150kph) Front/Side/Rear 75 lbf / 21 lbf / 77 lbf (330 N) / (90 N) / (340 N) Mounting category L (Light) Wind survival rating* 120 mph (200 kph) Shipping dimensions 62.8 x 6.8 x 3.6 inches (1595 x 172 x 92 mm) Shipping weight 22 lb (10 kg) Mounting Fixed mounts for 2 to 4.6 inch (50 to 115 mm) OD masts are included and tilt options are available. See reverse for order information.
10
742 215V01 65 Panel Antenna
30
30
No moving electrical connections.
0
33 0
20
60
30
270
90
24
12
15
21
180
10
30
30
33 0 0
20
60
30
270
90
24
12
15
21
180
Specifications:
Gain +45 and -45 polarization horizontal beamwidth +45 and -45 polarization vertical beamwidth Vertical Patternsidelobe suppression for first side- lobe above main beam
17101880 MHz 17.7 dBi 68 (half-power) 7.1 (half-power) 0 4 8 10 18 18 17 17 dB
18501990 MHz 17.9 dBi 66 (half-power) 6.8 (half-power) 0 4 8 10 18 18 17 17 dB
19202200 MHz 18 dBi 64 (half-power) 6.4 (half-power) 0 4 8 10 18 18 17 17 dB
11272-B 936.3733/d Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com
* Mechanical design is based on environmental conditions as stipulated in EIA-222-G (April 2007) and/or ETS 300 019-14 which include the static mechanical load imposed on an antenna by wind at maximum velocity. See the Engineering Section of the catalog for further details.
Fax: (541) 779-3991
742 215V01 65 Panel Antenna
2.5 inches (64 mm)
64 mm M8
51.7 inches (1314 mm) 53.5 inches (1359 mm) 54.7 inches (1389 mm)
2 x 738 546 Mounting Kit (included)
Mounting Options:
Model 2 x 738 546 (included) 850 10013 Description Mounting Kit for 2 to 4.6 inch (50 to 115 mm) OD mast. 4.4 lb (2 kg) Tilt Mount Kit 013 degrees downtilt angle. 7.4 lb (3.7 kg)
2.8 inches (70 mm)
6.1 inches (155 mm)
Order Information:
Model Description 742 215V01 Antenna with 7-16 DIN connectors 010 adjustable electrical downtilt
17102200 17102200 -45 +45
7/16 DIN
7/16 DIN
All specifications are subject to change without notice. The latest specications are available at www.kathrein-scala.com.
Kathrein Inc., Scala Division Post Office Box 4580 Medford, OR 97501 (USA) Phone: (541) 779-6500 Email: [email protected] Internet: www.kathrein-scala.com Fax: (541) 779-3991
