Script started on Mon Mar 5 13:18:58 2012 bash-3.2# ssh [email protected] Data Domain OS 5.0.2.

3-259543 Password: Last login: Mon Mar 5 13:01:38 CST 2012 from 10.10.10.10 on pts/0 Last login: Mon Mar 5 13:14:50 2012 from 10.10.10.10 Welcome to Data Domain OS 5.0.2.3-259543 ---------------------------------------ciime@dd-cablevision# enclosure show controllers 2 Encl 2 Model ES20 Capacity 16 Slots WWN 50050CC10011BD78 Serial # 50050CC10011BD78 Number of Controllers 2 Controller A WWN Firmware Serial # Status HOST port EXP'N port Controller B WWN 50050CC1013D649F Firmware 0605 R02 Serial # IMS8579313D649F Status OK HOST port 12.0 Gbps EXP'N port 12.0 Gbps ciime@dd-cablevision# enclosure show topology Port enc.ctrl.port enc.ctrl.port enc.ctrl.port ---- - ------------- - ------------- - ------------2a 2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 3.B.H: 3.B.E 2c 2d 3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E 3b 3c 3d ---- - ------------- - ------------- - ------------Encl WWN Serial # ---- ---------------- --------------2 50050CC10011BD78 SHU0945847LB47H 3 50050CC10011BB48 SHU0945847LB47C 4 50050CC10011B35E SHU0945847LB453 ---- ---------------- --------------Error Message: ----------------No error detected ----------------Enclosure rear view: CONTROLLER-B CONTROLLER-A OP-PANEL +--------------------------------------------------------+ | | E | H | | | | | | | | | H | E | | 50050CC1013D68EF 0605 R02 IMS8579313D68EF OK 12.0 Gbps 12.0 Gbps

+--------------------------------------------------------+ ciime@dd-cablevision# enclosure show topology beacon 2 Invalid command "enclosure show beacon 2", showing help: Commands matching "enclosure show": enclosure show all [<enclosure>] Show all enclosure environmentals enclosure show controllers [<enclosure>] Show status of enclosure controllers enclosure show fans [<enclosure>] Show status of enclosure fans enclosure show powersupply [<enclosure>] Show status of enclosure powersupplies enclosure show summary Show enclosure summary enclosure show temperature-sensors [<enclosure>] Show status of enclosure temperature sensors enclosure show topology Show topology of all the enclosures ciime@dd-cablevision# enclosure show bbbbbbeacon 2 Start LED beaconing... LED beaconing completed. ciime@dd-cablevision# enclosure show all Enclosure 1 Fans Description Level Status ----------- ----- -----FAN 1 low OK FAN 2 low OK FAN 3 low OK FAN 4 low OK FAN 5 low OK FAN 6 low OK FAN 7 low OK FAN 8 low OK ----------- ----- -----Temperature Description C/F Status -------------- ------ -----MLB TEMP 1 38/100 OK MLB TEMP 2 18/64 OK FP TEMP 17/63 OK BP LEFT TEMP 23/73 OK BP MIDDLE TEMP 21/70 OK BP RIGHT TEMP 17/63 OK LP TEMP 41/106 OK FHFL TEMP 43/109 OK CPU 0 TEMP 28/82 OK CPU 1 TEMP 27/81 OK -------------- ------ -----Power Supply Description Status --------------- -----Power Module #1 OK Power Module #2 OK --------------- -----Enclosure 2 Fans Description Level Status ------------------- ----- ------

Power module #1 fan low OK Power module #2 fan low OK ------------------- ----- -----Temperature Description C/F Status ---------------- ----- -----Internal ambient 36/97 OK ---------------- ----- -----Power Supply Description Status --------------- -----Power Module #1 OK Power Module #2 OK --------------- -----Enclosure 3 Fans Description Level Status ------------------- ----- -----Power module #1 fan low OK Power module #2 fan low OK ------------------- ----- -----Temperature Description C/F Status ---------------- ----- -----Internal ambient 36/97 OK ---------------- ----- -----Power Supply Description Status --------------- -----Power Module #1 OK Power Module #2 OK --------------- -----Enclosure 4 Fans Description Level Status ------------------- ----- -----Power module #1 fan low OK Power module #2 fan low OK ------------------- ----- -----Temperature Description C/F Status ---------------- ----- -----Internal ambient 35/95 OK ---------------- ----- -----Power Supply Description Status --------------- -----Power Module #1 OK Power Module #2 OK --------------- -----ciime@dd-cablevision# enclosure show all summary Enclosure Model No. Serial No. Capacity --------- --------- --------------- -------1 DD890 1F41526125 4 Slots 2 ES20 SHU0945847LB47H 16 Slots 3 ES20 SHU0945847LB47C 16 Slots 4 ES20 SHU0945847LB453 16 Slots --------- --------- --------------- -------4 enclosures present. ciime@dd-cablevision# enclosure show all 2

Enclosure 2 Fans Description Level Status ------------------- ----- -----Power module #1 fan low OK Power module #2 fan low OK ------------------- ----- -----Temperature Description C/F Status ---------------- ----- -----Internal ambient 36/97 OK ---------------- ----- -----Power Supply Description Status --------------- -----Power Module #1 OK Power Module #2 OK --------------- -----ciime@dd-cablevision# help Help is available on the following topics: adminaccess alerts alias archive authentication autosupport cifs cluster config ddboost disk enclosure filesys ipmi license log mtree ndmpd net nfs ntp replication route snapshot snmp storage support system user vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. ciime@dd-cablevision# filesys s Invalid command "filesys", showing help: Commands matching "filesys": filesys archive unit add filesys filesys filesys filesys filesys filesys filesys filesys Creates an archive unit from the archive tier and adds it to the filesystem archive unit del <archive-unit> Deletes the given archive unit archive unit expand <archive-unit> Expands the size of the archive unit archive unit list [<archive-unit> | all] Lists the given archive unit clean reset {schedule | throttle | all} Reset (to default) the schedule clean set schedule [daily | monthly | never] <day(s)> <time> Schedule when cleaning starts clean set throttle <percent> Set cleaning throttle (100 => fastest, 0 => slowest) clean show config Show the cleaning configuration clean show schedule Show the cleaning schedule

filesys filesys filesys filesys filesys filesys

clean show throttle clean start clean status clean stop clean watch create

filesys destroy [and-zero] filesys disable filesys enable filesys encryption algorithm reset

Show the cleaning throttle Start cleaning now Show cleaning status Stop the cleaning operation Monitor cleaning process Creates a filesystem with the active tier storage Reinitialize the file system, destroying all data Disable file system operations Enable file system operations Reset the encryption algorithm to default (aes_256_cbc)

filesys encryption algorithm set {aes_128_cbc | aes_256_cbc | aes_128_gcm | aes_256_gcm} Set the encryption algorithm filesys encryption algorithm show Show the encryption algorithm filesys encryption apply-changes Bring the filesystem up to date with current encryption configuration filesys encryption disable Disable encryption filesys encryption enable Enable encryption filesys encryption lock Lock the filesystem filesys encryption passphrase change Change the passphrase filesys encryption show Show the encryption configuration filesys encryption unlock Unlock the filesystem filesys expand Expands the filesystem with the active tier storage filesys fastcopy source <src> destination <dest> Fastcopy from source to destination filesys option disable report-replica-as-writable Disable filesys option filesys option enable report-replica-as-writable Enable filesys option filesys option reset {local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures} Reset (to default) filesys options filesys option set global-compression-type {1 | 9} Set global compression type filesys option set local-compression-type {none | lz | gzfast | gz} Set compression type filesys option set staging-reserve <percent> Set staging reserve percentage from 0 to 90 filesys option show [{local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures}] Show filesys options filesys restart Restart the filesystem filesys show compression [<filename>] [last <n> { hours | days }] [no-sync] filesys show compression [summary | daily | daily-detailed] {[last <n> { hours | days | weeks | months }] | [start <date> [end <date>]]} Show file system compression statistics filesys show file-info <filename> Shows the file information filesys show space Show the file system space report filesys show uptime Show the file system uptime report

filesys status filesys sync

Show whether or not the file system is running Sync all modified files to disk

ciime@dd-cablevision# filesys status The filesystem is enabled and running. ciime@dd-cablevision# filesys show file-info o data **** Missing one or more required arguments. Incomplete syntax "filesys show file-info", showing help: filesys show file-info <filename> Shows the file information ciime@dd-cablevision# silesysy filesys show space Active Tier: Resource Size GiB ---------------- -------/data: pre-comp /data: post-comp 65880.5 /ddvar 132.9 ---------------- -------ciime@dd-cablevision# filesys ciime@dd-cablevision# df Used GiB Avail GiB -------- --------0.0 0.1 65880.4 1.2 124.9 -------- --------destriy oy /data Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------

Active Tier: Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB ---------------- -------- -------- --------- ---- ------------/data: pre-comp 0.0 /data: post-comp 65880.5 0.1 65880.4 0% 0.0 /ddvar 132.9 1.2 124.9 1% ---------------- -------- -------- --------- ---- ------------ciime@dd-cablevision# filesys destroy /data Incorrect syntax "filesys destroy /data", showing help: filesys destroy [and-zero] Reinitialize the file system, destroying all data ciime@dd-cablevision# filesys destroy data Incorrect syntax "filesys destroy data", showing help: filesys destroy [and-zero] Reinitialize the file system, destroying all data ciime@dd-cablevision# filesys destroy Only sysadmin may use this command. ciime@dd-cablevision# sudo -s That doesn't look like a valid command, displaying help... Help is available on the following topics: adminaccess alerts alias archive authentication autosupport cifs cluster config disk enclosure filesys ipmi license log mtree ndmpd net ntp replication route snapshot snmp storage support system user

ddboost

nfs

vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. ciime@dd-cablevision# help Help is available on the following topics: adminaccess alerts alias archive authentication autosupport cifs cluster config ddboost disk enclosure filesys ipmi license log mtree ndmpd net nfs ntp replication route snapshot snmp storage support system user vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. ciime@dd-cablevision# exit Connection to 10.10.10.1 closed. bash-3.2# ssh [email protected] Data Domain OS 5.0.2.3-259543 Password: Last login: Mon Mar 5 13:00:59 CST 2012 from 10.10.10.10 on pts/0 Last login: Mon Mar 5 13:27:48 2012 from 10.10.10.10 Welcome to Data Domain OS 5.0.2.3-259543 ---------------------------------------sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# filesys destroy /data Incorrect syntax "filesys destroy /data", showing help: filesys destroy [and-zero] Reinitialize the file system, destroying all data sysadmin@dd-cablevision# fils esysddestroy The 'filesys destroy' command irrevocably destroys all data in all the MTrees, including all virtual tapes and archive units. The 'filesys destroy' operation will take about 10-11 minutes. File access is disabled during this process. Are you sure? (yes|no|?) [no]: yes ok, proceeding.

Please enter sysadmin password to confirm 'filesys destroy': ......... The filesystem is now disabled. Destroying the filesystem. The filesystem has been destroyed. sysadmin@dd-cablevision# df Filesystem doesn't exist. Filesystem of size 64.56 TiB can be created. sysadmin@dd-cablevision# storeg age Invalid command "storage", showing help: Commands matching "storage": storage add [tier {active | archive}] {enclosure <enclosure-id> | dev<disk-id> [spindle-group <1-16>] | disk <enclosure-id>.<disk-id> } Adds storage to the specified tier storage remove {enclosure <enclosure-id> | dev<disk-id> | disk <enclosure_id>.<disk-id>} Removes specified storage from its tier storage show {all | summary | tier {active | archive}} Show storage information sysadmin@dd-cablevision# storage show all Active tier details: Disk Disks Count Group ----------- ------------------------------- ----(spare) 2.15-2.16, 3.15-3.16, 4.15-4.16 6 (available) 2.1-2.14, 3.1-3.14, 4.1-4.14 42 ----------- ------------------------------- ----sysadmin@dd-cablevision# storage remove enclosure 2 Removing enclosure 2...done Updating system information...done Enclosure 2 successfully removed. sysadmin@dd-cablevision# storage show **** Syntax error: exactly one argument [in a group of arguments] must be specif ied. Incorrect syntax "storage show", showing help: storage show {all | summary | tier {active | archive}} Show storage information sysadmin@dd-cablevision# storage show all summary Disk States Active tier ----------- ----------Spare 4 Available 28 TOTAL DISKS 32 ----------- ----------sysadmin@dd-cablevision# storage show all Active tier details: Disk Disks Count Additional

Additional Information ---------------------

Group ----------(spare) (available) -----------

-------------------3.15-3.16, 4.15-4.16 3.1-3.14, 4.1-4.14 --------------------

----4 28 -----

Information ---------------------

Storage addable disks: Disk Disks Count Additional Type Information --------- -------- ----- ----------(unknown) 2.1-2.16 16 --------- -------- ----- ----------sysadmin@dd-cablevision# storage remove enclosure 3 Removing enclosure 3...done Updating system information...done Enclosure 3 successfully removed. sysadmin@dd-cablevision# enclosure show topology Port enc.ctrl.port enc.ctrl.port enc.ctrl.port ---- - ------------- - ------------- - ------------2a 2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 3.B.H: 3.B.E 2c 2d 3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E 3b 3c 3d ---- - ------------- - ------------- - ------------Encl WWN Serial # ---- ---------------- --------------2 50050CC10011BD78 SHU0945847LB47H 3 50050CC10011BB48 SHU0945847LB47C 4 50050CC10011B35E SHU0945847LB453 ---- ---------------- --------------Error Message: ----------------No error detected ----------------Enclosure rear view: CONTROLLER-B CONTROLLER-A OP-PANEL +--------------------------------------------------------+ | | E | H | | | | | | | | | H | E | | +--------------------------------------------------------+ sysadmin@dd-cablevision# Active tier details: Disk Disks Group ----------- --------(spare) 4.15-4.16 (available) 4.1-4.14 ----------- --------Storage addable disks: Disk Disks storage show all Count ----2 14 ----Additional Information --------------------Count Additional

Type --------- -----------------(unknown) 2.1-2.16, 3.1-3.16 --------- -----------------sysadmin@dd-cablevision# storage

Information ----- ----------32 ----- ----------remove enclosure 4

Removing enclosure 4...done Updating system information...done Enclosure 4 successfully removed. sysadmin@dd-cablevision# storage show all Active tier details: Active tier has no storage. Storage addable disks: Disk Disks Type --------- ---------------------------(unknown) 2.1-2.16, 3.1-3.16, 4.1-4.16 --------- ---------------------------sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# config setup Licenses Configuration Configure Licenses at this time (yes|no) [no]: no Network Configuration Configure Network at this time (yes|no) [no]: yes Hostname Enter the hostname for this system (fully-qualified domain name) [dd-cablevision.localdomain]: Domainname Enter your DNS domainname [localdomain]: Ethernet port eth0a Enable Ethernet port eth0a (yes|no|?) [yes]: Use DHCP on Ethernet port eth0a (yes|no|?) [no]: no Enter the IP address for eth0a [10.10.10.1]: Enter the netmask for eth0a [255.255.255.0]: Ethernet port eth0b Enable Ethernet port eth0b (yes|no|?) [no]: no Ethernet port eth1a Enable Ethernet port eth1a (yes|no|?) [no]: no Ethernet port eth1b Enable Ethernet port eth1b (yes|no|?) [no]: no Ethernet port eth4a Enable Ethernet port eth4a (yes|no|?) [no]: no Count ----48 ----Additional Information ---------------------

Ethernet port eth4b Enable Ethernet port eth4b (yes|no|?) [no]: no Default Gateway Enter the default gateway IP address : 10.10. DNS Servers Enter the DNS Server list (zero, one, two or three IP addresses) : Pending Network Settings Hostname dd-cablevision.localdomain Domain name localdomain Default Gateway DNS Server List DNS Server List Port Enabled Cable DHCP IP Address Netmask ----- ------- ----- ---- ---------- ------------eth0a yes yes no 10.10.10.1 255.255.255.0 eth0b no no n/a n/a n/a eth1a no no n/a n/a n/a eth1b no no n/a n/a n/a eth4a no no n/a n/a n/a eth4b no no n/a n/a n/a ----- ------- ----- ---- ---------- ------------Do you want to save these settings (Save|Cancel|Retry): save Filesystem Configuration Configure Filesystem at this time (yes|no) [no]: no System Configuration Configure System at this time (yes|no) [no]: no CIFS Configuration Configure CIFS at this time (yes|no) [no]: no NFS Configuration Configure NFS at this time (yes|no) [no]: no Configuration complete. sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# storage show all Active tier details: Active tier has no storage. Storage addable disks: Disk Disks Count Type --------- ---------------------------- ----(unknown) 2.1-2.16, 3.1-3.16, 4.1-4.16 48 --------- ---------------------------- ----sysadmin@dd-cablevision# enclosure show topology Port enc.ctrl.port enc.ctrl.port ---- - ------------- - ------------- 2a 2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 2c Additional Information --------------------enc.ctrl.port ------------3.B.H: 3.B.E

2d 3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E 3b 3c 3d ---- - ------------- - ------------- - ------------Encl WWN Serial # ---- ---------------- --------------2 50050CC10011BD78 SHU0945847LB47H 3 50050CC10011BB48 SHU0945847LB47C 4 50050CC10011B35E SHU0945847LB453 ---- ---------------- --------------Error Message: ----------------No error detected ----------------Enclosure rear view: CONTROLLER-B CONTROLLER-A OP-PANEL +--------------------------------------------------------+ | | E | H | | | | | | | | | H | E | | +--------------------------------------------------------+ sysadmin@dd-cablevision# storage add tier active enclosure 2 Checking storage requirements...done Adding enclosure 2 to the active tier...done Updating system information...done Enclosure 2 successfully added to the active tier. sysadmin@dd-cablevision# Active tier details: Disk Disks Group ----------- -------(available) 2.1-2.16 ----------- -------storage show all Count ----16 ----Additional Information --------------------Count Additional Information -----------

Storage addable disks: Disk Disks Type --------- -----------------(unknown) 3.1-3.16, 4.1-4.16 --------- -----------------sysadmin@dd-cablevision# storage

----32 ----- ----------add tier active enclosure 3

Checking storage requirements...done Adding enclosure 3 to the active tier...done Updating system information...done Enclosure 3 successfully added to the active tier. sysadmin@dd-cablevision# storage show all Active tier details: Disk Disks Count Additional Group Information ----------- ------------------ ----- ----------(available) 2.1-2.16, 3.1-3.16 32

-----------

------------------

-----

-----------

Storage addable disks: Disk Disks Count Additional Type Information --------- -------- ----- ----------(unknown) 4.1-4.16 16 --------- -------- ----- ----------sysadmin@dd-cablevision# storage add tier active enclosure 4 Checking storage requirements...done Adding enclosure 4 to the active tier...done Updating system information...done Enclosure 4 successfully added to the active tier. sysadmin@dd-cablevision# filesys Invalid command "filesys", showing help: Commands matching "filesys": filesys archive unit add filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys Creates an archive unit from the archive tier and adds it to the filesystem archive unit del <archive-unit> Deletes the given archive unit archive unit expand <archive-unit> Expands the size of the archive unit archive unit list [<archive-unit> | all] Lists the given archive unit clean reset {schedule | throttle | all} Reset (to default) the schedule clean set schedule [daily | monthly | never] <day(s)> <time> Schedule when cleaning starts clean set throttle <percent> Set cleaning throttle (100 => fastest, 0 => slowest) clean show config Show the cleaning configuration clean show schedule Show the cleaning schedule clean show throttle Show the cleaning throttle clean start Start cleaning now clean status Show cleaning status clean stop Stop the cleaning operation clean watch Monitor cleaning process create Creates a filesystem with the active tier storage destroy [and-zero] Reinitialize the file system, destroying all data disable Disable file system operations enable Enable file system operations encryption algorithm reset Reset the encryption algorithm to default (aes_256_cbc) encryption algorithm set {aes_128_cbc | aes_256_cbc | aes_128_gcm | aes_256_gcm} Set the encryption algorithm encryption algorithm show Show the encryption algorithm encryption apply-changes Bring the filesystem up to date with current encryption configuration encryption disable Disable encryption encryption enable Enable encryption encryption lock Lock the filesystem

filesys encryption passphrase change filesys encryption show filesys encryption unlock filesys expand filesys filesys filesys filesys Change the passphrase Show the encryption configuration Unlock the filesystem Expands the filesystem with the active tier storage fastcopy source <src> destination <dest> Fastcopy from source to destination option disable report-replica-as-writable Disable filesys option option enable report-replica-as-writable Enable filesys option option reset {local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures} Reset (to default) filesys options option set global-compression-type {1 | 9} Set global compression type option set local-compression-type {none | lz | gzfast | gz} Set compression type option set staging-reserve <percent> Set staging reserve percentage from 0 to 90 option show [{local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures}] Show filesys options restart Restart the filesystem show compression [<filename>] [last <n> { hours | days }] [no-sync] show compression [summary | daily | daily-detailed] {[last <n> { hours | days | weeks | months }] | [start <date> [end <date>]]} Show file system compression statistics show file-info <filename> Shows the file information show space Show the file system space report show uptime Show the file system uptime report status Show whether or not the file system is running sync Sync all modified files to disk

filesys filesys filesys filesys

filesys filesys filesys

filesys filesys filesys filesys filesys

sysadmin@dd-cablevision# filesys create A filesystem of approximate size 64.56 TiB will be created. Do you want to continue? (yes|no) [yes]: no user aborted the command sysadmin@dd-cablevision# storage remove enclosure 4 Removing enclosure 4...done Updating system information...done Enclosure 4 successfully removed. sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# storage show all Active tier details:

Disk Group ----------(available) -----------

Disks -----------------2.1-2.16, 3.1-3.16 ------------------

Count ----32 -----

Additional Information ---------------------

Storage addable disks: Disk Disks Count Additional Type Information --------- -------- ----- ----------(unknown) 4.1-4.16 16 --------- -------- ----- ----------sysadmin@dd-cablevision# filesys create ciime A filesystem of approximate size 42.76 TiB will be created. Do you want to continue? (yes|no) [yes]: yes ok, continuing. This will take 5 - 10 minutes. Provisioning storage... ########################################### [100%] [5%] Initializing filesystem... ########################################### [100%] [5%] You now have a freshly initialized filesystem. Enable the filesystem using 'filesys enable'. sysadmin@dd-cablevision# filesys enable Please wait............. The filesystem is now enabled. sysadmin@dd-cablevision# df Active Tier: Resource Size GiB Used GiB Avail GiB Use% ---------------- -------- -------- --------- ---/data: pre-comp 0.0 /data: post-comp 43647.3 0.0 43647.3 0% /ddvar 132.9 1.3 124.9 1% ---------------- -------- -------- --------- ---sysadmin@dd-cablevision# storage add tier active enclosure Checking storage requirements...done Adding enclosure 4 to the active tier...done Updating system information...done Enclosure 4 successfully added to the active tier. sysadmin@dd-cablevision# storage show all Active tier details: Disk Disks Count Additional Group Information ----------- -------------------- ----- ----------dg1 2.1-2.14 14 dg2 3.1-3.14 14 (spare) 2.15-2.16, 3.15-3.16 4 (available) 4.1-4.16 16 ----------- -------------------- ----- ----------sysadmin@dd-cablevision# storage filesys sh expand The filesystem will be expanded approximately by 21.80 TiB. Cleanable GiB ------------0.0 ------------4

Are you sure? (yes|no|?) [no]: yes ok, proceeding. ########################################### [100%] [5%] The approximate size of the filesystem is 64.98 TiB. sysadmin@dd-cablevision# df Active Tier: Resource Size GiB Used GiB Avail GiB ---------------- -------- -------- --------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 65876.4 /ddvar 132.9 1.3 124.9 ---------------- -------- -------- --------sysadmin@dd-cablevision# disk port Invalid command "disk port", showing help: Commands matching "disk port": disk port enable <port-id> disk port show {stats | summary} Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------

Allow I/O on specified initiator port Show disk port information

sysadmin@dd-cablevision# disk port show summary Port Connection Link Connected Status Type Speed Enclosure IDs ---- ---------- ------- ------------- ------2a SAS offline 2b SAS 12 Gbps 2, 3, 4 online 2c SAS offline 2d SAS offline 3a SAS 12 Gbps 2, 3, 4 online 3b SAS offline 3c SAS offline 3d SAS offline ---- ---------- ------- ------------- ------sysadmin@dd-cablevision# disk mulr tipath status Port Hops Status Disk ---- ---- ------- ---------2b 2 Active 2.1 - 2.8 2 Standby 2.9 - 2.16 3 Standby 3.1 - 3.16 1 Active 4.1 - 4.16 3a 2 Active 2.9 - 2.16 2 Standby 2.1 - 2.8 1 Active 3.1 - 3.16 3 Standby 4.1 - 4.16 ---- ---- ------- ---------sysadmin@dd-cablevision# disk multipath option set monitor **** Missing one or more required arguments. Incomplete syntax "disk multipath option set monitor", showing help: disk multipath option set monitor {enabled | disabled} Enable or disable multipath monitoring sysadmin@dd-cablevision# disk multipath option set monitor enable **** Invalid argument: "enable". Valid strings are: disabled, enabled. sysadmin@dd-cablevision# disk multo ipath option set monitor enabled

Multi-path configuration monitoring is already enabled. sysadmin@dd-cablevision# disk multipath status Port Hops Status Disk ---- ---- ------- ---------2b 2 Active 2.1 - 2.8 2 Standby 2.9 - 2.16 3 Standby 3.1 - 3.16 1 Active 4.1 - 4.16 3a 2 Active 2.9 - 2.16 2 Standby 2.1 - 2.8 1 Active 3.1 - 3.16 3 Standby 4.1 - 4.16 ---- ---- ------- ---------sysadmin@dd-cablevision# df Active Tier: Resource Size GiB Used GiB ---------------- -------- -------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 /ddvar 132.9 1.3 ---------------- -------- -------sysadmin@dd-cablevision# filesys status The filesystem is enabled and running. sysadmin@dd-cablevision# filesys mode Invalid command "filesys mode", showing Commands matching "filesys": filesys archive unit add filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys Avail GiB --------65876.4 124.9 --------Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------

help:

Creates an archive unit from the archive tier and adds it to the filesystem archive unit del <archive-unit> Deletes the given archive unit archive unit expand <archive-unit> Expands the size of the archive unit archive unit list [<archive-unit> | all] Lists the given archive unit clean reset {schedule | throttle | all} Reset (to default) the schedule clean set schedule [daily | monthly | never] <day(s)> <time> Schedule when cleaning starts clean set throttle <percent> Set cleaning throttle (100 => fastest, 0 => slowest) clean show config Show the cleaning configuration clean show schedule Show the cleaning schedule clean show throttle Show the cleaning throttle clean start Start cleaning now clean status Show cleaning status clean stop Stop the cleaning operation clean watch Monitor cleaning process create Creates a filesystem with the active tier storage destroy [and-zero] Reinitialize the file system, destroying all data disable Disable file system operations enable Enable file system operations encryption algorithm reset Reset the encryption algorithm to default (aes_256_cbc) encryption algorithm set

filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys filesys

filesys filesys filesys filesys

filesys filesys filesys

filesys filesys filesys filesys filesys

{aes_128_cbc | aes_256_cbc | aes_128_gcm | aes_256_gcm} Set the encryption algorithm encryption algorithm show Show the encryption algorithm encryption apply-changes Bring the filesystem up to date with current encryption configuration encryption disable Disable encryption encryption enable Enable encryption encryption lock Lock the filesystem encryption passphrase change Change the passphrase encryption show Show the encryption configuration encryption unlock Unlock the filesystem expand Expands the filesystem with the active tier storage fastcopy source <src> destination <dest> Fastcopy from source to destination option disable report-replica-as-writable Disable filesys option option enable report-replica-as-writable Enable filesys option option reset {local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures} Reset (to default) filesys options option set global-compression-type {1 | 9} Set global compression type option set local-compression-type {none | lz | gzfast | gz} Set compression type option set staging-reserve <percent> Set staging reserve percentage from 0 to 90 option show [{local-compression-type | low-bw-optim | marker-type | report-replica-as-writable | global-compression-type | staging-reserve | staging-clean | staging-delete-suspend | compute-segfeatures}] Show filesys options restart Restart the filesystem show compression [<filename>] [last <n> { hours | days }] [no-sync] show compression [summary | daily | daily-detailed] {[last <n> { hours | days | weeks | months }] | [start <date> [end <date>]]} Show file system compression statistics show file-info <filename> Shows the file information show space Show the file system space report show uptime Show the file system uptime report status Show whether or not the file system is running sync Sync all modified files to disk

df sysadmin@dd-cablevision# filesys Active Tier: Resource Size GiB ---------------- -------/data: pre-comp /data: post-comp 65876.5 /ddvar 132.9 ---------------- -------sysadmin@dd-cablevision# Used GiB -------0.0 0.1 1.3 -------Avail GiB --------65876.4 124.9 --------Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------

sysadmin@dd-cablevision# cifs Invalid command "cifs", showing help: Commands matching "cifs": cifs add /backup <client-list> cifs add /ddvar <client-list> cifs del /backup <client-list> cifs del /ddvar <client-list> cifs disable cifs enable cifs hosts add <ipaddr> <host-list> cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs Add a CIFS backup client Add a CIFS administrative client Delete a CIFS client Delete a CIFS client Disable CIFS clients from connecting Enable CIFS clients to connect

Add a lmhosts mapping hosts del <ipaddr> Remove a lmhosts mapping hosts reset Reset (to default) the lmhosts mappings hosts show Show lmhosts mappings nb-lookup <netbios-name> Resolve a NetBIOS name to IP address option reset <name> Reset (to default) a CIFS option option set <name> <value> Set a CIFS option option show Show CIFS options reset authentication Reset (to default) CIFS authentication reset clients Reset (to default) the CIFS client list reset nb-hostname Reset (to default) the NetBIOS hostname reset wins-server Reset (to default) the WINS Server set authentication active-directory <realm> { [<dc1> [<dc2> ...]] | * }

Set mode to Active Directory cifs set authentication nt4 <domain> { [<pdc> [<bdc>]] | * } Set mode to NT4 domain cifs set authentication workgroup <workgroup> Set mode to workgroup cifs set nb-hostname <nb-hostname> Set the NetBIOS hostname cifs set wins-server <ipaddr> Set the WINS Server IP cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share cifs share destroy <share> Destroy a share cifs share disable <share> Disable a share cifs share enable <share> Enable a share cifs share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share cifs share show [<share>] Show shares configuration cifs show active Show the active CIFS clients cifs show clients Show all allowed CIFS clients cifs show config Show the CIFS configuration cifs show detailed-stats Show detailed CIFS statistics cifs show stats Show CIFS statistics cifs status Show whether or not CIFS is enabled cifs troubleshooting domaininfo Show domain info cifs troubleshooting group <groupname> | <gid> | <SID> List one CIFS group cifs troubleshooting list-groups List all CIFS groups cifs troubleshooting list-users List all CIFS users cifs troubleshooting performance Collect traces for CIFS performance analysis cifs troubleshooting user <username> | <uid> | <SID>

List one CIFS user sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs share create ciime /data/ciime **** A value must be supplied for the "/data/ciime" keyword. sysadmin@dd-cablevision# cisf fs share create ciime /data/ciime browser ingenabled enabled wr itable enabled **** "/data/ciime" is an unknown keyword. sysadmin@dd-cablevision# cifs share create ciime / path /data/ciime **** Path must begin with /data or /backup or /ddvar. sysadmin@dd-cablevision# cifs create share create ciime /backup/ path /backup/ciime ** Directory "/backup/ciime" does not exist. Share "ciime" has been created. sysadmin@dd-cablevision# cifs shiow ow Invalid command "cifs show", showing help: Commands matching "cifs show": cifs show active Show cifs show clients Show cifs show config Show cifs show detailed-stats Show cifs show stats Show the active CIFS clients all allowed CIFS clients the CIFS configuration detailed CIFS statistics CIFS statistics

sysadmin@dd-cablevision# cifs show active PID Username Group Machine ------------------------------------------------------------------Service pid machine Connected at ------------------------------------------------------No locked files sysadmin@dd-cablevision# cifs share enable ciime Share "ciime" has been enabled. sysadmin@dd-cablevision# cifs show av ctive PID Username Group Machine ------------------------------------------------------------------Service pid machine Connected at ------------------------------------------------------No locked files sysadmin@dd-cablevision# cisf share show ciime That doesn't look like a valid command, displaying help... Help is available on the following topics: adminaccess alerts disk enclosure ntp replication

alias archive authentication autosupport cifs cluster config ddboost

filesys ipmi license log mtree ndmpd net nfs

route snapshot snmp storage support system user vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. sysadmin@dd-cablevision# cifs share show ciime Shares information for: ciime --------------- share ciime --------------enabled: yes path: /backup/ciime WARNING: The share path does not exist! sysadmin@dd-cablevision# df Active Tier: Resource Size GiB ---------------- -------/data: pre-comp /data: post-comp 65876.5 /ddvar 132.9 ---------------- -------sysadmin@dd-cablevision# cifs CIFS is enabled and running. sysadmin@dd-cablevision# cifs Mode Workgroup WINS Server NB Hostname Max Connections Max open files per connection sysadmin@dd-cablevision# cifs Used GiB -------0.0 0.1 1.3 -------status Avail GiB --------65876.4 124.9 --------Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------

show config Workgroup not specified not specified not specified; using hostname: DD-CABLEVISION 600 10000 showaacr tive

PID Username Group Machine ------------------------------------------------------------------Service pid machine Connected at ------------------------------------------------------No locked files sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs share disabled ciime Invalid command "cifs share disabled ciime", showing help: Commands matching "cifs share": cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled}

cifs cifs cifs cifs

share share share share

cifs share

| writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share destroy <share> Destroy a share disable <share> Disable a share enable <share> Enable a share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share show [<share>] Show shares configuration

sysadmin@dd-cablevision# cifs share disabled disable ciime ciime ciime Share "ciime" has been disabled. sysadmin@dd-cablevision# cifs share destroy ciime Are you sure you want to destroy "ciime" share? Are you sure? (yes|no|?) [no]: yes ok, proceeding. Share "ciime" has been deleted. sysadmin@dd-cablevision# cifs show active PID Username Group Machine ------------------------------------------------------------------Service pid machine Connected at ------------------------------------------------------No locked files sysadmin@dd-cablevision# cifs add /backup **** Missing one or more required arguments. Incomplete syntax "cifs add /backup", showing help: cifs add /backup <client-list> Add a CIFS backup client sysadmin@dd-cablevision# cifs add /backup 10/ .10.10.10 Successfully added clients to share "backup". ** This command is deprecated. Use 'cifs share create' or 'cifs share modify' instead. For more information see 'cifs share' commands. df share create sysadmin@dd-cablevision# cifs Active Tier: Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB ---------------- -------- -------- --------- ---- ------------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 65876.4 0% 0.0 /ddvar 132.9 1.3 124.9 1% ---------------- -------- -------- --------- ---- ------------sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs share create ciime / path /backup/ciime ** Directory "/backup/ciime" does not exist. Share "ciime" has been created. sysadmin@dd-cablevision# cifs share shoi w ciime Shares information for: ciime

--------------- share ciime --------------enabled: yes path: /backup/ciime WARNING: The share path does not exist! sysadmin@dd-cablevision# cifs status CIFS is enabled and running. sysadmin@dd-cablevision# cifs share create ciime path /backup/ciime browsing ena bled witte ritte eable enba abled **** "ciime" share name already exists. sysadmin@dd-cablevision# cifs share status Invalid command "cifs share status", showing help: Commands matching "cifs share": cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share cifs share destroy <share> Destroy a share cifs share disable <share> Disable a share cifs share enable <share> Enable a share cifs share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share cifs share show [<share>] Show shares configuration sysadmin@dd-cablevision# cifs share enabled ciime Invalid command "cifs share enabled ciime", showing help: Commands matching "cifs share": cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share cifs share destroy <share> Destroy a share cifs share disable <share> Disable a share cifs share enable <share> Enable a share cifs share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share cifs share show [<share>] Show shares configuration sysadmin@dd-cablevision# cifs mtreeshare Invalid command "mtree", showing help: Commands matching "mtree": mtree create <mtree-path> Create a MTree mtree delete <mtree-path> Delete a MTree mtree list [<mtree-path>] List the MTrees mtree rename <mtree-path> <new-mtree-path> Rename a Mtree mtree retention-lock disable mtree <mtree-path>

mtree mtree

mtree mtree

mtree

mtree mtree

mtree

Disables retention-lock for specified MTree. retention-lock enable mtree <mtree-path> Enables retention-lock for specified MTree. retention-lock reset {min-retention-period | max-retention-period} mtree <mtree-path> Reset retention periods to default for specified MTree. retention-lock revert <path> Reverts retention-lock for specified path. retention-lock set {min-retention-period | max-retention-period} <period> mtree <mtree-path> Set retention periods for specified MTree. retention-lock show {min-retention-period | max-retention-period} mtree <mtree-path> Show retention periods for specified MTree. retention-lock status mtree <mtree-path> Show retention-lock status for specified MTree. show compression <mtree_path> [tier {active | archive}] [summary | daily | daily-detailed] {[last <n> { hours | days | weeks | months } | [start <date> [end <date>]]} Show mtree compression statistics undelete <mtree-path> Undelete a Mtree

sysadmin@dd-cablevision# mtree create /backup **** Invalid MTree path "/backup": MTree path has to start with /data/col1/ foll owed by MTree-name sysadmin@dd-cablevision# mtree create /data/col1/ciime MTree "/data/col1/ciime" created successfully. sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs share create ciime path /data/col1/ciime browsing enabled writeable enabled **** "ciime" share name already exists. sysadmin@dd-cablevision# share cifs share cifs disable ciime Share "ciime" has been disabled. sysadmin@dd-cablevision# cifs shrae are destroy ciime Are you sure you want to destroy "ciime" share? Are you sure? (yes|no|?) [no]: yes ok, proceeding. Share "ciime" has been deleted. sysadmin@dd-cablevision# cifs shra are create cc iime par th /data/col1/ciime browsing enabled writeable enabled Share "ciime" has been created. sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# df

Active Tier: Resource Size GiB Used GiB ---------------- -------- -------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 /ddvar 132.9 1.3 ---------------- -------- -------sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# cd /data That doesn't look like a valid command,

Avail GiB --------65876.4 124.9 ---------

Use% ---0% 1% ----

Cleanable GiB ------------0.0 -------------

displaying help...

Help is available on the following topics: adminaccess alerts alias archive authentication autosupport cifs cluster config ddboost disk enclosure filesys ipmi license log mtree ndmpd net nfs ntp replication route snapshot snmp storage support system user vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. sysadmin@dd-cablevision# cd /data/col1 That doesn't look like a valid command, displaying help... Help is available on the following topics: adminaccess alerts alias archive authentication autosupport cifs cluster config ddboost disk enclosure filesys ipmi license log mtree ndmpd net nfs ntp replication route snapshot snmp storage support system user vtl

Type "help <topic>" to view help for the given topic. Type "help <keyword>" to search the commands for a specific keyword. For example, "help timezone" shows all commands relating to timezones. sysadmin@dd-cablevision# df Active Tier: Resource ---------------/data: pre-comp /data: post-comp /ddvar Size GiB -------65876.5 132.9 Used GiB -------0.0 0.1 1.3 Avail GiB --------65876.4 124.9 Use% ---0% 1% Cleanable GiB ------------0.0 -

---------------- -------sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# df

--------

---------

----

-------------

Active Tier: Resource Size GiB Used GiB Avail GiB ---------------- -------- -------- --------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 65876.4 /ddvar 132.9 1.3 124.9 ---------------- -------- -------- --------sysadmin@dd-cablevision# cifs share show Shares information for: all shares --------------- share backup --------------clients: 10.10.10.10 enabled: yes path: /backup --------------- share ciime --------------browsing: yes clients: 10.10.10.10 enabled: yes maxconn: 0 path: /data/col1/ciime writeable: yes sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifsa Invalid command "cifs", showing help: Commands matching "cifs": cifs add /backup <client-list> cifs add /ddvar <client-list> cifs del /backup <client-list> cifs del /ddvar <client-list> cifs disable cifs enable cifs hosts add <ipaddr> <host-list> cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs cifs

Use% ---0% 1% ----

Cleanable GiB ------------0.0 -------------

Add a CIFS backup client Add a CIFS administrative client Delete a CIFS client Delete a CIFS client Disable CIFS clients from connecting Enable CIFS clients to connect

Add a lmhosts mapping hosts del <ipaddr> Remove a lmhosts mapping hosts reset Reset (to default) the lmhosts mappings hosts show Show lmhosts mappings nb-lookup <netbios-name> Resolve a NetBIOS name to IP address option reset <name> Reset (to default) a CIFS option option set <name> <value> Set a CIFS option option show Show CIFS options reset authentication Reset (to default) CIFS authentication reset clients Reset (to default) the CIFS client list reset nb-hostname Reset (to default) the NetBIOS hostname reset wins-server Reset (to default) the WINS Server set authentication active-directory <realm> { [<dc1> [<dc2> ...]] | * }

Set mode to Active Directory cifs set authentication nt4 <domain> { [<pdc> [<bdc>]] | * }

Set mode to NT4 domain cifs set authentication workgroup <workgroup> Set mode to workgroup cifs set nb-hostname <nb-hostname> Set the NetBIOS hostname cifs set wins-server <ipaddr> Set the WINS Server IP cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share cifs share destroy <share> Destroy a share cifs share disable <share> Disable a share cifs share enable <share> Enable a share cifs share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share cifs share show [<share>] Show shares configuration cifs show active Show the active CIFS clients cifs show clients Show all allowed CIFS clients cifs show config Show the CIFS configuration cifs show detailed-stats Show detailed CIFS statistics cifs show stats Show CIFS statistics cifs status Show whether or not CIFS is enabled cifs troubleshooting domaininfo Show domain info cifs troubleshooting group <groupname> | <gid> | <SID> List one CIFS group cifs troubleshooting list-groups List all CIFS groups cifs troubleshooting list-users List all CIFS users cifs troubleshooting performance Collect traces for CIFS performance analysis cifs troubleshooting user <username> | <uid> | <SID> List one CIFS user sysadmin@dd-cablevision# cifs share disabled **** Missing one or more required arguments. Incomplete syntax "cifs share disable", showing help: cifs share disable <share> Disable a share sysadmin@dd-cablevision# cifs share disable ciime Share "ciime" has been disabled. sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs shre are destroy ciime Are you sure you want to destroy "ciime" share? Are you sure? (yes|no|?) [no]: yes ok, proceeding. Share "ciime" has been deleted.

sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# cifs share destroy backup Are you sure you want to destroy "backup" share? Are you sure? (yes|no|?) [no]: yes ok, proceeding. Share "backup" has been deleted. sysadmin@dd-cablevision# cifs hsa share Invalid command "cifs share", showing help: Commands matching "cifs share": cifs share create <share> path <path> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Create a new share cifs share destroy <share> Destroy a share cifs share disable <share> Disable a share cifs share enable <share> Enable a share cifs share modify <share> {max-connections <max connections> | clients <clients> | browsing {enabled | disabled} | writeable {enabled | disabled} | users <users> | comment <comment>} Modify a share cifs share show [<share>] Show shares configuration sysadmin@dd-cablevision# cifs share create ciime path /data/col1/ciime clients 1 0.10.10.10 browsing enabled writeable enabled Share "ciime" has been created. sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# nfs Invalid command "nfs", showing help: Commands matching "nfs": nfs add <path> <client-list> [ ( <option-list> ) ] Add NFS clients to an export nfs del <path> <client-list> Delete NFS clients from an export nfs disable Disable NFS clients from connecting nfs enable Enable NFS clients to connect nfs reset clients Reset (to default) the NFS client list nfs reset stats Clear NFS statistics nfs show active Show active NFS clients nfs show clients Show all allowed NFS clients nfs show detailed-stats Show detailed NFS statistics nfs show histogram [<op>] Show an NFS histogram nfs show stats Show NFS statistics nfs status Show whether or not NFS is enabled sysadmin@dd-cablevision# nfs show client No NFS clients found. sysadmin@dd-cablevision# nfs add /data/col1/nfs 10.10.10.10 ** Directory "/data/col1/nfs" does not exist. NFS export for "/data/col1/nfs" added. sysadmin@dd-cablevision# nfs show active path client ----- --------------------/data localhost.localdomain

----- --------------------sysadmin@dd-cablevision# nfs show clients path client options -------------- ----------- ---------------------------------------/data/col1/nfs 10.10.10.10 (rw,no_root_squash,no_all_squash,secure) -------------- ----------- ---------------------------------------sysadmin@dd-cablevision# nfs status The NFS system is currently active and running. Total number of NFS requests handled = 104. sysadmin@dd-cablevision# nfs reset clients sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# sysadmin@dd-cablevision# nfs show active path client ----- --------------------/data localhost.localdomain ----- --------------------sysadmin@dd-cablevision# nfs enable NFS server is already enabled. sysadmin@dd-cablevision# nfs show clients No NFS clients found. sysadmin@dd-cablevision# nfs add /data/col1/nfs 10.10.10.10 ** Directory "/data/col1/nfs" does not exist. NFS export for "/data/col1/nfs" added. sysadmin@dd-cablevision# df Active Tier: Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB ---------------- -------- -------- --------- ---- ------------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 65876.4 0% 0.0 /ddvar 132.9 1.3 124.9 1% ---------------- -------- -------- --------- ---- ------------sysadmin@dd-cablevision# sysadmin@dd-cablevision# nfs df add /data/col1/nfs 10.10.10.10show clientsenablesho w activereset clientsstatushow clientsactiveadd /data/col1/nfs 10.10.10.10show c lient cifs share create ciime path /data/col1/ciime clients 10.10.10.10 browsing ena bled writeable enabled destroy backupciimeisable share showdf cd /data/col1df cifs sha re create ciime path /data/col1/ciime browsing enabled writeable enableddestroy ciimeisablecreate ciime path /data/col1/ciime browsing enabled writeable enabled mtree create /data/col1/ciimebackup create /backupdata/col1/ciimecifs share crea te ciime path /data/col1/ciime browsing enabled writeable enableddisable ciimees troycreate ciime path /data/col1/ciime browsing enabled writeable enableddf cd /dat a/col1df cifs share show share disable ciimeestroybackup create ciime path /data/co l1/ciime clients 10.10.10.10 browsing enabled writeable enablednfs show clientad d /data/col1/nfs 10.10.10.10show activeclientstatusreset clientsshow activeenabl mtree eshow clientsadd /data/col1/nfs 10.10.10.10df Invalid command "mtree", showing help: Commands matching "mtree": mtree create <mtree-path> Create a MTree mtree delete <mtree-path> Delete a MTree mtree list [<mtree-path>] List the MTrees mtree rename <mtree-path> <new-mtree-path> Rename a Mtree mtree retention-lock disable mtree <mtree-path> Disables retention-lock for specified

MTree. mtree retention-lock enable mtree <mtree-path> Enables retention-lock for specified MTree. mtree retention-lock reset {min-retention-period | max-retention-period} mtree <mtree-path> Reset retention periods to default for specified MTree. mtree retention-lock revert <path> Reverts retention-lock for specified path. mtree retention-lock set {min-retention-period | max-retention-period} <period> mtree <mtree-path> Set retention periods for specified MTree. mtree retention-lock show {min-retention-period | max-retention-period} mtree <mtree-path> Show retention periods for specified MTree. mtree retention-lock status mtree <mtree-path> Show retention-lock status for specified MTree. mtree show compression <mtree_path> [tier {active | archive}] [summary | daily | daily-detailed] {[last <n> { hours | days | weeks | months } | [start <date> [end <date>]]} Show mtree compression statistics mtree undelete <mtree-path> Undelete a Mtree mtreedf nfs add /data/col1 /data/col1/nfs 10.10.10.10show clientsenable sysadmin@dd-cablevision# mtree create show activereset clientsstatushow clientsactiveadd /data/col1/nfs 10.10.10.10sho w client cifs share create ciime path /data/col1/ciime clients 10.10.10.10 browsing enabled writeable enabled destroy backupciimeisable share showdf cd /data/col1df cifs share create ciime path /data/col1/ciime browsing enabled writeable enableddestr oy ciimeisablecreate ciime path /data/col1/ciime browsing enabled writeable enab ledmtree create /data/col1/ciimebackup create /backupdata/col1/ciimecifs share c reate ciime path /data/col1/ciime browsing enabled writeable enableddisable ciim eestroycreate ciime path /data/col1/ciime browsing enabled writeable enableddf cd / data/col1df cifs share show share disable ciimeestroybackup create ciime path /data /col1/ciime clients 10.10.10.10 browsing enabled writeable enablednfs show clien tadd /data/col1/nfs 10.10.10.10show activeclientstatusreset clientsshow activeen ableshow clientsadd /data/col1/nfs 10.10.10.10df mtree sysadmin@dd-cablevision# mtree e create /data/col1/nfs MTree "/data/col1/nfs" created successfully. sysadmin@dd-cablevision# df Active Tier: Resource Size GiB Used GiB Avail GiB ---------------- -------- -------- --------/data: pre-comp 0.0 /data: post-comp 65876.5 0.1 65876.4 /ddvar 132.9 1.3 124.9 ---------------- -------- -------- --------sysadmin@dd-cablevision# exit Connection to 10.10.10.1 closed. bash-3.2# F bash-3.2# Script done on Wed Mar 7 11:08:57 2012 Use% ---0% 1% ---Cleanable GiB ------------0.0 -------------