Catalog 3105/USA
Technical Information General Description
The PRH101 Series, Pilot Operated, Pressure Reducing/Relieving Valves can be used in any application where a regulated pressure lower than system pressure is required. The valve also acts as a relief valve, relieving any shocks or surges that occur between its regulated pressure port and the actuator. When the valve is in the relieving mode the inlet port is blocked.
Pressure Reducing/Relieving Valves Series PRH101
(2)
(3)
(1)
Operation
A common pilot section controls the valve setting whether reducing or relieving. As pressure at the regulated port exceeds the valve setting, the valve throttles or closes in order to maintain constant downstream pressure. A shock or surge at the regulated port further shifts the spool relieving flow to tank.
Press. Inlet (3) Reg. (1) Relief (2) Tank
Features
Hardened, precision ground parts for durability Ball-type pilot for added stability Full capacity reducing/relieving Performs job of two separate valves in one All external parts have yellow zinc dichromate. This coating allows them to withstand a 200 hour salt spray test.
Performance Curve
Flow vs. Regulated Pressure (Through cartridge only)
PSI Bar 6000 414 5000 345 4000 276 Hydraulic Oil 135 SSU @ 100F (28 cSt)
Specifications
Pressure
Maximum Flow
56.3 LPM (15.0 GPM) Inlet 0.94 LPM (0.25 GPM) Tank (Cont.) 56.3 LPM (15.0 GPM) Regulated 380 Bar (5500 PSI) - Steel 210 Bar (3000 PSI) - Aluminum 345 Bar (5000 PSI) - Steel 210 Bar (3000 PSI) - Aluminum -40C to +93.3C (Nitrile) (-40F to +200F) -31.7C to +121.1C (Fluorocarbon) (-25F to +250F) All parts steel. All operating parts hardened steel. Steel or Aluminum ISO Code 16/13, SAE Class 4 or better No restrictions Common Cavity No. C10-3
3000 207 2000 138 1000 69 Relieving 38 19 10 5 Reducing 19 38 5 10
Maximum Inlet Pressure Max. Reducing or Relieving Setting Pressure Operating Temp. Range (Ambient)
0 LPM 57 GPM 15
57 15
Flow (Q)
Cartridge Material Body Material Filtration Mounting Cavity
prh101.pm6.5, bl, ll
Hydraulics
PC76
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA
Catalog 3105/USA
Dimensions
*Inch equivalents for millimeter dimensions are shown in (**)
Pressure Reducing/Relieving Valves Series PRH101
Cartridge Only 25.4 (1.00) Dia. Knob
33.5 (1.32)
35.5 (1.40)
37.1 (1.46)
36.4 (1.44)
Tank (2) Pressure Inlet (3)
UNF-2A * 7/8-14 Thread
1 Hex. 65 N.m. (576 In.-Lbs.) Torque
46.2 (1.82)
applications over 210 Bar * For (3000 PSI), Thread Lock Compound is recommended.
Regulated Pressure (1) Screw/Knob Version
15.8 (.62)
Fixed Cap/Tamper Resistant Version
Cartridge In Body
0.8 (.03)
2 34.2 (1.35) 3
17.8 (.70) 54.0 (2.13)
66.7 (2.63)
1 7.1 (.28) 50.8 (2.00) 63.5 (2.50) 31.8 (1.25)
3.6 R. (.14) 15.9 (.63) 31.8 (1.25)
Note: Static pressure in Port 2 to be 210 Bar (3000 PSI) maximum.
THIRD-ANGLE PROJECTION
prh101.pm6.5, bl, ll
Hydraulics
PC77
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA
Catalog 3105/USA
Ordering Information
Pressure Reducing/Relieving Valves Series PRH101
PRH
5000 PSI Design P.O. Pressure Reducing/ Relieving Valve
10
Size
1
Style Adjustment Style Pressure Range Optional Pressure Setting Seals Body Option
7/8-14UNF-2B Threaded Cavity with .62 Dia. Seat
Code Omit V
Type Nitrile Fluorocarbon
Code 1
Style Pressure Reducing/ Relieving Valve
Description Pressure 10 i.e. 16.2 = 162 Bar (235 = 2350 PSI) Setting Range: 6.9 to 345 Bar (100 to 5000 PSI) All settings at 11.3 LPM (3 GPM)
Code F
Type Fixed style, preset at factory. Specify desired flow and pressure. i.e. 172.4 Bar (2500 PSI) @ 11.3 LPM (3 GPM). Note: For any given valve setting, any change in flow will cause a change in pressure. Knob Adjust Screw Adjust Tamper Resistant Cap
Code Omit 4P A4P 6P
Port Size & Material Cartridge Only 1/4 NPTF (B10-3-4P) 3/8 NPTF (B10-3-6P) 1/2 NPTF (B10-3-8P) Steel
K S T
1/4 NPTF (B10-3-A4P) Aluminum Steel 3/8 NPTF (B10-3-A6P) Aluminum Steel 1/2 NPTF (B10-3-A8P) Aluminum SAE-6 SAE-6 SAE-8 SAE-8 (B10-3-6T) Steel
Code 10
Type 6.9 - 69 Bar (100 - 1000 PSI) Standard Setting: 34.5 Bar (500 PSI) @ 11.3 LPM (3 GPM) 6.9 - 138 Bar (100 - 2000 PSI) Standard Setting: 69 Bar (1000 PSI) @ 11.3 LPM (3 GPM) 6.9 - 207 Bar (100 - 3000 PSI) Standard Setting: 103.5 Bar (1500 PSI) @ 11.3 LPM (3 GPM) 6.9 - 345 Bar (100 - 5000 PSI) Standard Setting: 172.4 Bar (2500 PSI) @ 11.3 LPM (3 GPM)
A6P 8P A8P 6T A6T 8T A8T 4B A4B 6B A6B
20
(B10-3-A6T) Aluminum (B10-3-8T) Steel
30
(B10-3-A8T) Aluminum Steel
1/4 BSPG (B10-3-4B) 3/8 BSPG (B10-3-6B)
1/4 BSPG (B10-3-A4B) Aluminum Steel 3/8 BSPG (B10-3-A6B) Aluminum
50
NOTE: If system pressure does not exceed 210 Bar (3000 PSI), aluminum bodies can be used. Higher pressures require steel bodies.
SERVICE PARTS
Knob Option: 852605 & 852634 (To convert screw adjust to knob adjust) Nitrile Seal Kit: SK10-3 Fluorocarbon Seal Kit: SK10-3V
Shipping Weight Cartridge Only .23 kg (0.5 lbs.) Cartridge in Body 1.0 kg (2.2 lbs.)
prh101.pm6.5, bl, ll
Hydraulics
PC78
Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio 44035 USA
