Goulds 3355
Multistage Process Pumps
Goulds Model 3355
Multiple nozzle orientations to fit your piping configurations. Multistage Pumps Designed for a Wide Range of High Pressure Services
I Capacities to 1500 GPM (340 m3/hr) I Heads to 1640 feet (500 m) I Temperatures to 280 F (140 C) I Pressures to 800 psig (55 bar)
Radial Suction Configuration. Radial nozzles are rotatable at 90 increments.
Performance Features for High Pressure Services
Improved Reliability
Heavy duty bearing design No external balance lines Internal seal flushing Metal to metal casing fits
Ease of Maintenance
Modular design Off-the-shelf components Fully interchangeable stages No balancing drum/disc Fewer parts than traditional designs Metal fits guarantee alignment No flush/bypass lines Easily retrofitted
Safety
ANSI B15.1 Coupling Guard Fully confined stage o-rings Internal flushing & balance Raised face flanges End Suction Configuration. Optional Inducer is available for low NPSH applications.
Services
Boiler Feed Condensate Return Deaeration Reverse Osmosis Shower/Spray Service Mine De-watering Cleaning Systems Seal Water Booster Product Transfer Reactor Feed Pressure Boosting
Hydraulic Coverage 60 Hz/3600 rpm
3600 RPM
2000
5x6-11B
1000
TOTAL HEADFEET
700 500 400 300 200
1.5x2.5-7A
1.5x2.5-7B
2.5x4-8A
2.5x4-8B
4x5-10A
4x5-10B
5x6-11A
100
70 50 30 40 50 70 100 200 300 400 500 700 1000 2000
CAPACITYGALLONS PER MINUTE
Hydraulic Coverage 50 Hz/3000 rpm
600
1.5x2.5-7B
3000 RPM
400 300
TOTAL HEADMETERS
200 150
1.5x2.5-7A
100 80 60
2.5x4-8A
4x5-10A
5x6-11A
5x6-11B
40 20 10 6 8 10 15 20 30 40 50 60 80 100 150 200 300 400 500
2.5x4-8B
4x5-10B
CAPACITYm 3/h 3
Model 3355
Rugged Design Features for Wide Range of Services
DIFFUSERS
Eliminates radial loads to assure long bearing life.
The 3355 is also available in End Suction configuration.
PRODUCT LUBRICATED BEARINGS (ES Configuration) ANGULAR CONTACT, DOUBLE-ROW THRUST BEARINGS
Can carry a thrust load in either direction. Frontal sleeve bearing is located behind first stage the impeller for improved performance and reliability.
HIGH STRENGTH TIE RODS INTERNAL BALANCING
Eliminates the need for balance lines outside the pump. Bolting machined to SAE standards for easy maintenance using high tensile strength steel.
INTERSTAGE CASING FITS WEAR RINGS
Optional case wear rings available. Metal fits ensure proper alignment of the stages at any temperature. No deflection due to o-ring-fits.
SEAL CHAMBER SHAFT
Standard material is 12-13% Chrome for improved shaft strengths and corrosion resistance. Taper Bore design eliminates the worry associated with venting. Improved flow to the seal helps extend seal life.
INTERNAL SEAL FLUSHING KEYED IMPELLERS
Offset keys ensure rotational shaft balance. Special internal channels ensure the seal always has sufficient flushing fluid.
MULTIPLE HYDRAULICS
Two impeller/diffuser combinations per size maximizes efficiency at all conditions of service.
DEEP-GROOVE BALL BEARINGS
Are unconstrained to accommodate thermal expansion. An optional inducer is available on the End Suction configuration for low NPSH applications.
FEWER PARTS
The 3355 uses fewer parts than traditional multistage pumps with balancing devices which means less inventory and increased maintenance ease.
Sectional View Model 3355
136A 112 248 104 178 356A 425 492Q 184 157 193B 409
228C 397A 119 383S 445E 357F 437A
358
252
100F 412K 101 150 100G
356S 100D 122
Parts List and Materials of Construction
Item Number
100F 100D 101 150/150L 103 228C 119 184 197A 122 104/126 356S 136A 100G 157 248 358 252 193B 383/383S 409 112 357F 425 412K 178 356A 445E 397A 492Q 437A
Part Name
Casing (Suction) Casing (Discharge) Impeller Diffuser Case Wear Ring (Optional) Bearing Bracket Bearing Cover Seal Cover Bearing - Bushing (5) Shaft Sleeve Tie Rod Bearing Nut Stage Casing Spacer Sleeve Thrower Drain Plug Throttling Element Grease Nipple Mech Seal Radial Ball Bearing Radial Ball Bearing Nut Nut O-Ring - all Key - all Stud Pin Disc Spacer Plug Washer - all
Cast Iron
Ductile Iron (1) Ductile Iron (2) Cast Iron Cast Iron Stainless Steel Cast Iron Cast Iron Cast Iron Bronze 12% Chrome 12% Chrome Carbon Steel Carbon Steel Cast Iron Stainless Steel Rubber Carbon Steel
Material CI/SS Fitted
Ductile Iron (1) Ductile Iron (2) Stainless Steel Cast Iron Stainless Steel Cast Iron Cast Iron Cast Iron Bronze 12% Chrome 12% Chrome Carbon Steel Carbon Steel Cast Iron Stainless Steel Rubber Carbon Steel 316 Ti Carbon Steel depends on seal configuration Steel Steel Carbon Steel Carbon Steel EPDM 12% Chrome Carbon Steel 316 SS Carbon Steel Carbon Steel Carbon Steel
All Stainless Steel
Stainless Steel (3) Stainless Steel Stainless Steel (4) Stainless Steel Stainless Steel Cast Iron Cast Iron Stainless Steel Bronze Duplex St. St. Duplex St. St. Carbon Steel Carbon Steel Stainless Steel Stainless Steel Rubber Stainless Steel
Steel Steel EPDM
Steel Steel EPDM Duplex Stainless Steel
(1) Standard flange rating is 150#RF for radial suction and 150#RF for end suction. End suction casing is cast iron material. (2) Standard flange rating is 300#RF. Casing material is stainless steel with optional 600#RF flange. (3) Standard flange rating is 300#RF for radial suction and 150#RF for end suction. (4) Standard flange rating is 600#RF. (5) Only on end suction configuration.
Dimensions Model 3355
Radial Suction End Suction
CP W NPS1 M NPS2 W Y NPS1
NPS2 D D
DIMENSIONS
Pump Size 1.5x2.5-7 2.5x4-8 4x5-10 5x6-11 NPSI 1.5 2.5 4 5 NPS2 2.5 4 5 6 A 9.06 9.84 13.38 15.75 W 11.02 12.40 14.58 17.72 D 5.51 6.30 8.27 9.84 X 7.09 8.27 9.84 11.81
NUMBER OF STAGES
Pump Size M 1.5x2.5-7 CP Y M 2.5x4-8 CP Y M 4x5-10 CP Y M 5x6-11 CP Y 2 5.71 24.72 9.44 7.09 28.54 11.02 10.03 35.26 15.75 12.40 43.31 18.90 3 7.87 26.88 11.61 9,84 31.29 13.78 13.39 38.62 19.09 16.54 47.45 23.03 4 10.04 29.05 13.78 12.60 34.05 16.54 16.73 41.96 22.44 20.67 51.58 27.17 5 12.20 31.21 15.94 15.35 36.80 19.29 20.08 45.31 25.79 24.80 55.71 31.30 6 14.37 33.38 18.11 18.11 39.56 22.05 23.43 48.66 29.13 28.94 59.85 35.43 7 16.54 35.55 20.28 20.87 42.32 24.80 26.77 52.00 32.48 33.07 63.98 39.57 8 18.70 37.71 22.44 23.62 45.07 27.56 30.12 55.35 35.83 9 20.87 39.88 24.60 26.38 47.83 30.31 33.47 58.70 39.18 10 23.03 42.04 26.77 29.13 50.58 33.07 11 25.20 44.21 28.94 31.88 53.33 35.83 12 27.36 46.37 31.10 34.65 56.10 38.58 13 29.53 48.54 33.27 37.40 58.85 41.33 14 31.69 50.70 35.43 15 33.86 52.87 37.60 16 36.02 55.03 39.77
* Note: Add 0.79 to Y dim for size 2.5x4-8 with inducer design.
Other Goulds Multistage Pumps
Goulds offers multistage pumps for various services covering a wide range of capacities and heads
3600
Capacities to 2,600 GPM (590 m3/h) Heads to 5,500 feet TDH (1675 m) Temperatures to 400 F (205 C) Working Press to 2,500 PSI (172 bar)
3311
Capacities to 1,100 GPM (250 m3/h) Heads to 5,250 feet TDH (1600 m) Temperatures to 350 F (180 C) Working Press to 2,320 PSI (160 bar)
3316
Capacities to 3,000 GPM (681 m3/h) Heads to 1,000 feet TDH (630 m) Temperatures to 350 F (180 C) Working Press to 550 PSI (38 bar)
Visit our website at www.gouldspumps.com
Form B3355 11/07
2007 Goulds Pumps, Incorporated A subsidiary of ITT Corporation