Agricultural Tyres

Technical databook 12 th edition

introduction and contents

Introduction
The extensive technical data and other information relating to tyres
and accessories on the following pages has been compiled to reflect
as accurately and completely as possible the current state of
development. Due to changes in our product range the tyre sizes
given in this guide are not always identical to our available range.
For further information please contact us:
2

MITAS a. s.
vehlova 1900, 106 25 Prague 10, Czech Republic
For more information, including addresses of our sales organisations,
please visit www.mitas-tyres.com.

Contents
patterns, markings and definitions

List of tread patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

List of tyre sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Tyre size marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Speed symbols and conversion tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Tyre sidewall marking and structures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Load index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3

tractor radial tyres

RD





AC

Tractor Radial Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RD-0365 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RD-0270 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RD-7070 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RD-0185 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RD-0585 series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC85, AC90Row Crop . . . . . . .NEW
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12
12
18
18
19
19
30

implement radial tyres

Edition 20122013

AR Agriterra 02&03 . . . . . . . . . . . . .NEW

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

AR-01&02 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
tractor diagonal tyres

AF Tractor Agro Forestry . . . . . . . . .NEW

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
TD Tractor Drive (diagonal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
implement diagonal tyres

IM Implement Non Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

TR Implement Traction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
other tyres

TS Tractor Small . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
TF Tractor Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
B Bantam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
use and maintenance

US Tread pattern marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Use and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fitting and removal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Water ballasting of tractor tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rim specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms and shortcuts used in this catalogue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CGS holding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

102
103
104
105
106
108
110

tread patterns

List of tread patterns

RD-01

19

RD-02

18

RD-03

12

RD-05

19

RD-70

18

TR-04

74

TR-05

74

TR-06

74

TR-07

74

TR-08

75

AC 85

30

AC 90

30

AR-01

41

AR-02

41

Agriterra 02

40

TR-09

75

TR-10

75

TR-11

75

TR-12

75

TS-01

84

Agriterra 03

40

AF-01

46

TL-01

46

TD-01

50

TD-02

50

TS-02

84

TS-03

84

TS-04

85

TS-05

85

TS-06

85

TD-05

51

TD-13

51

TD-17

51

TD-19

51

IM-01

64

TS-07

85

TF-01

92

TF-03

92

TF-04

92

TF-05

92

IM-02 (TO 2)

64

IM-03

64

IM-04

65

IM-06

65

IM-07

65

TF-06

92

IM-05

92

B1

100

B2

100

B5

100

IM-08

65

IM-09

65

IM-10

65

TR-01

74

TR-03

74

B6

100

Legend:

tractor radial TYRES

Page 12

implement radial TYRES

Page 40

tractor diagonal TYRES

Page 46

implement diagonal TYRES

Page 64

other TYRES

Page 84

Tyre sizes

List of tyre sizes

Size
(inch)

Tyre size

Alternative
tyre size

Tread
pattern

Page

(11.2 R 24)

RD-01
RD-70
RD-01
RD-01
RD-02
RD-01
RD-03
RD-70
RD-01
RD-03
RD-03
RD-03
RD-01
RD-01
RD-01
RD-02
RD-01
RD-02
RD-01
RD-05
RD-03
RD-03
RD-02
RD-03
RD-03
RD-01
RD-05
RD-01
RD-01
RD-02
RD-03
RD-01
RD-01
RD-05
RD-01
RD-02
RD-70
RD-03
RD-03
RD-01
RD-01
RD-05
RD-01
RD-01
RD-02
RD-02
RD-01

24
22
24
24
20
24
14
22
24
14
14
14
24
24
24
20
24
20
24
28
14
14
20
14
14
24
28
26
26
20
16
26
26
28
26
20
22
16
16
26
26
28
26
26
20
20
26

38

Tractor radial

24

28

30

32
34

36
38

280/85 R 24
320/70 R 24
320/85 R 24
340/85 R 24
380/70 R 24
380/85 R 24
420/65 R 24
420/70 R 24
420/85 R 24
440/65 R 24
480/65 R 24
540/65 R 24
280/85 R 28
320/85 R 28
340/85 R 28
380/70 R 28
380/85 R 28
420/70 R 28
420/85 R 28
420/85 R 28
440/65 R 28
480/65 R 28
480/70 R 28
540/65 R 28
600/65 R 28
380/85 R 30
380/85 R 30
420/85 R 30
460/85 R 30
480/70 R 30
540/65 R 30
320/85 R 32
420/85 R 34
420/85 R 34
460/85 R 34
480/70 R 34
520/70 R 34
540/65 R 34
600/65 R 34
340/85 R 36
340/85 R 38
380/80 R 38
420/85 R 38
460/85 R 38
480/70 R 38
520/70 R 38
520/85 R 38

Size
(inch)

(12.4 R 24)
(13.6 R 24)
(14.9 R 24)

(16.9 R 24)

(11.2 R 28)
(12.4 R 28)
(13.6 R 28)
(14.9 R 28)
(16.9 R 28)
(16.9 R 28)

(14.9 R 30)
(14.9 R 30)
(16.9 R 30)
(18.4 R 30)

(12.4 R 32)
(16.9 R 34)
(16.9 R 34)
(18.4 R 34)

(13.6 R 36)
(13.6 R 38)
(16.9 R 38)
(18.4 R 38)

(20.8 R 38)

42

46
50

Tyre size
540/65 R 38
580/70 R 38
600/65 R 38
650/65 R 38
710/70 R 38
480/80 R 42
520/85 R 42
650/65 R 42
480/80 R 46
380/90 R 50
480/80 R 50

Alternative
tyre size

(20.8 R 42)

Size
(inch)

Tread
pattern

Page

RD-03
RD-70
RD-03
RD-03
RD-03
RD-05
RD-01
RD-03
RD-05
RD-05
RD-05

16
22
16
16
16
28
26
16
28
28
28

Tractor Drive (diagonal)

AC 90
AC 85
AC 85
AC 85
AC 85
AC 90
AC 85
AC 90
AC 90
AC 85
AC 85
AC 90
AC 85
AC 85
AC 85
AC 85

32
32
32
32
32
32
32
34
34
34
34
34
34
36
36
36

26

AR-01
AR-01
AR-02
Agriterra 02
Agriterra 02
Agriterra 03

44
44
42
42
42
42

AF-01
AF-01
TL-01
AF-01
AF-01

48
48
48
48
48

20
24

Row crop

32

34
36
38
42
46
48
50
54

270/80 R 32
270/95 R 32
320/85 R 32
320/90 R 32
320/85 R 34
270/80 R 36
340/85 R 38
300/85 R 42
300/95 R 42
300/95 R 46
380/90 R 46
270/95 R 48
340/85 R 48
320/90 R 50
380/90 R 50
320/90 R 54

28

30

32
34

implement radial

22.5 385/65 R 22.5 (15 R 22.5)

445/65 R 22.5 (18 R 22.5)
560/60 R 22.5
26.5 600/55 R 26.5
710/50 R 26.5
30.5 650/65 R 30.5

36
38

Tractor Agro Forestry

24
28
30
34

380/8524
380/8528
16.930
420/8534
460/8534

(14.924)
(14.928)
(16.934)
(18.434)

Tyre size

Tread
Page
pattern

8.320
8.324
9.524
11.224
11.224
12.424
12.424
14.924
14.924
16.924
16.924
18.426
23.126
11.228
12.428
12.428
13.628
14.928
16.928
16.928
16.930
16.930
18.430
18.430
9.532
12.432
16.934
16.934
18.434
18.434
12.436
13.636
12.438
13.638
13.638
14.938
15.538
16.938
18.438

TD-13
TD-02
TD-02
TD-02
TD-19
TD-02
TD-19
TD-02
TD-19
TD-02
TD-13
TD-19
TD-01
TD-02
TD-02
TD-19
TD-19
TD-19
TD-02
TD-13
TD-13
TD-17
TD-02
TD-13
TD-13
TD-13
TD-02
TD-17
TD-02
TD-19
TD-13
TD-13
TD-17
TD-02
TD-13
TD-05
TD-05
TD-13
TD-19

52
52
52
52
52
52
52
52
54
54
54
54
54
54
54
54
54
56
56
56
56
56
56
56
56
58
58
58
58
58
58
58
60
60
60
60
60
60
60

IM-06
IM-04
IM-08
IM-10
TR-06
TR-07
IM-04

66
66
66
66
76
76
66

implement diagonal

10

4.0010
10.0/8012
10.0/8012
14.5 200/6014.5
15 3115.5015
3115.5015
15.3 10.0/7515.3

Size
(inch)

Tyre size

15.3 10.0/7515.3
10.0/7515.3
11.5/8015.3
11.5/8015.3
12.5/8015.3
15.5 400/6015.5
400/6015.5
6.0016
16
7.5016
10.5016
15.0/5517
17
15.0/5517
19.0/4517
500/5017
1417.5
17.5
12.0/7518
18
12.0/7518
12.5/8018
12.5/8018
12.5/8018
13.0/6518
13.0018
13.0018
14.5/8018
14.5/8018
16.0/7020
400/7020
22.5 500/6022.5
500/6022.5
500/6022.5
550/6022.5
550/6022.5
550/6022.5
600/4022.5
600/5022.5
15.5/8024
24
17.5L24

Tread
Page
pattern
TR-03
TR-04
IM-04
TR-03
IM-04
IM-07
TR-08
TD-13
TD-13
IM-01
IM-04
TR-01
IM-04
IM-07
TR-10
TR-03
TR-11
TR-09
IM-03
IM-04
IM-04
IM-02
TO 2
IM-03
TR-05
TR-09
TR-01
IM-09
TR-08
TR-12
IM-09
TR-08
IM-09
TR-12
TR-08
TR-01
TR-01

76
76
68
76
68
68
78
90
90
68
68
78
68
70
78
78
78
78
70
70
70
70
70
72
78
80
80
72
80
80
72
80
70
80
82
82
82

TS-01
TS-03
TS-03
TS-02
TS-06
TS-02
TS-06
TS-06
TS-07
TS-05

86
86
86
86
86
86
86
88
88
88

tractor small

8
10

4.008
4.010
5.010
5.0012
12
6.5/8012
6.5/7514
14
5.0015
15
6.5/8015
69018015
15.3 10.0/7515.3

Size
(inch)

Tyre size

Tread
Page
pattern

15.3 11.5/8015.3 TS-05

6.0016
TS-04
16
7.5016
TS-04
7.5020
TS-04
20
7.5020
TD-13
8.320
TD-13

88
88
90
90
90
90

Tractor front

16

18
20

6.0016
6.0016
6.0016
6.5016
6.5016
7.5016
7.5016
7.5016
9.0016
10.0016
11L16
6.0018
6.0018
6.5020
6.5020
6.5020
7.5020
7.5020
7.5020

TF-01
TF-03
TF-06
TF-03
TF-05
TF-01
TF-03
TF-05
TF-03
TF-03
IM-05
TF-03
TF-04
TF-03
TF-04
TF-05
TF-01
TF-03
TF-05

94
94
94
94
94
94
94
96
96
96
96
96
96
96
98
98
98
98
98

124
164
164
3.508

B1
B2
B5
B6

100
100
100
100

bantam

4
8

tyre size marking | speed symbols and conversion tables

Tyre size marking

Speed symbols and conversion tables

SW

340/85 R 24
340

Nominal section width (in mm)

85

Aspect ratio H/SW (in %)

Radial construction

24

Nominal rim diameter (in inches)

Speed category

Speed symbol

A1

A2

A3

A4

A5

A6

A7

A8

Speed (km/h)

10

15

20

25

30

35

40

50

65

80

100

110
9

15.0/55 17

Aspect ratio H/SW (in %)

Cross-ply construction

17

Nominal rim diameter (in inches)

Pressure units conversion table

D

Nominal section width (in inches)

55

OD

15.0

31 15.50 15

bar

1.0

1.5

2.0

2.5

3.0

3.5

4.0

4.5

5.0

5.5

kPa

100

150

200

250

300

350

400

450

500

550

p.s.i.

15

22

29

36

44

51

58

65

73

80

31

Overall diameter (in inches)

15.50

Nominal section width (in inches)

bar

6.0

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.0

10.5

Cross-ply construction

kPa

600

650

700

750

800

850

900

950

1 000

1 050

15

Nominal rim diameter (in inches)

p.s.i.

87

94

102

109

116

123

131

138

145

152

17.5 L 24
17.5

Nominal section width (in inches)

Reduced aspect ratio

Cross-ply construction

24

Nominal rim diameter (in inches)

7.50 20
7.50

Nominal section width (in inches)

Cross-ply construction

20

Nominal rim diameter (in inches)

16 4
16

Overall diameter (in inches)

Nominal section width (in inches)

SW
OD
H
D

Section width
Overall diameter
Section height
Rim diameter

Units conversion table

Length

Mass

Pressure

1 milimeter (mm) = 0.3937

1 pound (lb) = 0.4536 kg

1 p.s.i. (lb/in2) = 6.895 kPa

1 inch () = 25.4 mm = 0.0254 m

1 kilogram (kg) = 2.205 lb

1 kg/cm2 = 98.066 kPa

1 meter (m) = 3.281 ft

1 foot (ft) = 0.3048 m

1 bar = 100 kPa

Volume

1 kilometer (km) = 0.6214 mile

1 litre (l) = 0.21 gall

1 mile = 1609 m = 1.609 km

1 imperial gallon (imp.gal) = 4.55 l

tYRE sidewall marking and structure | load index

Tyre sidewall marking

10

Load index
LI

kg

LI

67

307

104

kg
900

141

LI

2575

kg

31

109

68

315

105

925

142

2650

32

112

69

325

106

950

143

2725

Meaning

33

115

70

335

107

975

144

2800

MITAS

Trademark of producer

34

118

71

345

108

1000

145

2900

480/65 R 28

Tyre size marking

35

121

72

355

109

1030

146

3000

RD-03

Tread Pattern code

36

125

73

365

110

1060

147

3075

136

Load index (LI 136 = 2 240 kg)

37

128

74

375

111

1090

148

3150

Speed symbol (D = 65 km/h)

38

132

75

387

112

1120

149

3250

139

Load index (LI 139 = 2 430 kg)

39

136

76

400

113

1150

150

3350

A8

Speed symbol (A8 = 40 km/h)

40

140

77

412

114

1180

151

3450

TUBELESS

Tubeless tyre

41

145

78

425

115

1215

152

3550

42

150

79

437

116

1250

153

3650

43

155

80

450

117

1285

154

3750

44

160

81

462

118

1320

155

3875

45

165

82

475

119

1360

156

4000

46

170

83

487

120

1400

157

4125

47

175

84

500

121

1450

158

4250

48

180

85

515

122

1500

159

4375

49

185

86

530

123

1550

160

4500

50

190

87

545

124

1600

161

4625

51

195

88

560

125

1650

162

4750

52

200

89

580

126

1700

163

4875

53

206

90

600

127

1750

164

5000

54

212

91

615

128

1800

165

5150

55

218

92

630

129

1850

166

5300

56

224

93

650

130

1900

167

5450

57

230

94

670

131

1950

168

5600

58

236

95

690

132

2000

169

5800

59

243

96

710

133

2060

170

6000

60

250

97

730

134

2120

171

6150

61

257

98

750

135

2180

172

6300

62

265

99

775

136

2240

173

6500

63

272

100

800

137

2300

174

6 700

64

280

101

825

138

2360

175

6 900

65

290

102

850

139

2430

176

7 100

66

300

103

875

140

2500

R-1

US tread profile marking

Tyre structure

Sidewall
Apex
Bead Wire

kg
106

Sign

Direction of rotation

Tread Pattern
Breaker Cord
Inner Liner
Carcass Cord

LI
30

Bias (Diagonal,
cross-ply) Tyre
A pneumatic tyre in which the ply
cords extend to the beads and are
laid substantially at alternate angles
less than 90 to the centre-line
of the tread.

Radial Ply Tyre

A pneumatic tyre in which the ply
cords extend to the beads and
are laid substantially at 90 to the
centre-line of the tread, the carcass
being stabilised by an essentially
inextensible circumferential belt.

11

tractor radial tyres | RD

kW 22
hp 30

RD-03 New generation of tractor tyre

for gentle ground handling and higher
load capacity
> Reduced soil compaction thanks to large ground contact area and optimal
pressure distribution

66
90

88 110 132 162 191 >220

120 150 180 220 260 >300

RD-03 65 series vs. standard 85 tyres

Thanks to their much larger ground contact area and optimal pressure distribution, the new-generation
65 tyres cause significantly less ground compression even when heavy equipment is used, ensuring
that any damage to plant roots is minimal.

Ground contact patch

Standard

Tension force of spinning tractor rear wheels

New RD-03

Standard

> Up to 40% higher tension force compared with standard tyres

25

> High load capacity due to the wide design and the large volume of air

20
Tension Force (kN)

12

44
60

> Outstanding grip and tractive force ensure less slip and much lower fuel consuption
> Maximum speed of 65 km/h on roads, with high driving comfort and easy handling

New RD-03

soil humidity: 11.2 %

13

15
10
5

Standard: 520/85 R 38; 1.2 bar; 3 400 kg

RD-03: 650/65 R 38; 1.0 bar; 3 400 kg

RD-03
Traction
Soil protection
Handling on road
cost efFiciency
load capacity

10

20

30
Drive Slip (%)

40

50

tractor radial tyres | RD

RD-03

RD-03 technical data and load capacities

Tyre size

420/65 R 24

Service
description
LI/SS

126 D
(129 A8)

14

Rim
(permitted)

W 13 L
W 12
W 11

Section
width
(mm)

420
410
400

Overall
diameter
(mm)

1147

Loaded
static
radius
(mm)

515

Rolling
circumference
(mm)

3425

Speed
radius
index

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)
0.4

550

165
1240

440/65 R 24

128 D
(131 A8)

W 14 L
W 13
W 12

448
438
428

1 190

535

3 560

575

185
1330

480/65 R 24

133 D
(136 A8)

W 15 L
W 14 L
W 13

485
475
465

1 239

545

3 670

600

210
1525

540/65 R 24

140 D
(143 A8)

W 16 L
W 18 L
W 15 L

527
547
517

1 300

572

3 839

625

300
1835

440/65 R 28

131 D
(134 A8)

W 14 L
W 13
W 12

445
435
425

1 295

588

3 882

625

200
1430

480/65 R 28

136 D
(139 A8)

W 15 L
W 14 L
W 13

478
468
458

1 345

611

4 034

650

250
1635

540/65 R 28

142 D
(145 A8)

W 16 L
W 18 L
W 15 L

520
540
510

1 402

622

4 150

675

315
1960

600/65 R 28

147 D
(150 A8)

W 18 L
DW 18 L
W 16 L

597
597
577

1 475

640

4 340

700

400
2310

0.6

0.8

1.0

1.2

1.4

1.6

1130
1190
1450

1235
1285
1350
1645

1305
1370
1430
1500
1825

1425
1495
1560
1640
1 995

1565
1645
1715
1800
2190

1700
1785
1850
1955
2380

1215
1280
1555

1325
1380
1450
1765

1400
1470
1535
1610
1960

1530
1610
1675
1760
2145

1670
1750
1830
1920
2335

1800
1890
1950
2070
2520

1515
1580
1660
2020

1605
1685
1755
1845
2245

1755
1840
1920
2015
2455

1910
2005
2090
2195
2675

2060
2165
2240
2370
2885

1825
1900
1995
2430

1930
2025
2115
2220
2700

2110
2215
2310
2425
2950

2310
2425
2525
2655
3230

2500
2625
2725
2875
3500

1425
1485
1560
1895

1505
1580
1650
1730
2110

1645
1725
1800
1890
2305

1800
1890
1970
2070
2520

1950
2050
2120
2245
2730

1625
1695
1780
2165

1720
1805
1885
1980
2410

1880
1975
2060
2160
2630

2060
2165
2260
2370
2885

2240
2350
2430
2575
3135

1950
2035
2135
2600

2065
2165
2260
2375
2890

2255
2365
2470
2595
3155

2455
2580
2690
2825
3440

2650
2785
2900
3050
3710

2300
2395
2515
3065

2430
2555
2665
2795
3405

2660
2790
2910
3055
3720

2875
3020
3145
3305
4025

3075
3230
3350
3535
4305

1395
1465
1780

1675
1760
2140

1305
1375
1670

1495
1570
1910

1790
1880
2290

2110
2220
2700

Speed
(km/h)
2.0

2.4

3.0

2790

65
50
40
30
10

2955

65
50
40
30
10

3385

65
50
40
30
10

4105

65
50
40
30
10

3205

65
50
40
30
10

3680

65
50
40
30
10

4355

65
50
40
30
10

5050

65
50
40
30
10

15

tractor radial tyres | RD

RD-03

RD-03 technical data and load capacities

Tyre size

540/65 R 30

Service
description
LI/SS

150 D
(153 A8)

16

Rim
(permitted)

W 16 L
W 18 L
W 15 L

Section
width
(mm)

532
552
522

Overall
diameter
(mm)

1484

Loaded
static
radius
(mm)

667

Rolling
circumference
(mm)

4427

Speed
radius
index

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)
0.4

700

330
2020

540/65 R 34

145 D
(148 A8)

W 16 L
W 18 L
W 15 L

523
543
513

1579

710

4710

750

360
2145

600/65 R 34

151 D
(154 A8)

W 18 L
DW 18 L
W 16 L

587
587
570

1632

725

4850

775

465
2520

540/65 R 38

147 D
(150 A8)

W 16 L
W 18 L
W 15 L

522
542
512

1681

752

5003

800

420
2260

600/65 R 38

153 D
(156 A8)

W 18 L
DW 18 L
W 16 L

588
588
568

1742

781

5212

825

500
2655

650/65 R 38

157 D
(160 A8)

W 18 L
DW 20 B

626
646

1829

809

5410

875

630
3000

710/70 R 38

166 D
(169 A8)

DW 23 B

703

1922

848

5693

925

800
3765

650/65 R 42

165 D
(168 A8)

DW 20 B
DW 18 L

635
615

1926

868

5767

925

650
3145

Load values given for 0.4bar and 0.6bar at 40km/h are for calculating dual and triple load values only.
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.

0.6

Speed
(km/h)

0.8

1.0

1.2

1.4

1.6

2.0

2.4

1850
1940
2365

2010
2100
2205
2680

2130
2235
2330
2450
2980

2325
2440
2545
2675
3255

2545
2675
2790
2930
3565

2760
2895
3020
3175
3865

3080
3235
3375
3545
4315

3350
3520
3650
3855
4690

1960
2055
2505

2130
2225
2335
2845

2255
2370
2470
2595
3160

2465
2590
2700
2835
3450

2690
2820
2945
3090
3765

2900
3045
3150
3335
4060

2505
2615
2745
3340

2650
2785
2905
3050
3710

2900
3045
3175
3330
4055

3180
3335
3480
3655
4450

3450
3625
3780
3970
4830

2250
2345
2465
3000

2380
2500
2605
2765
3330

2600
2730
2850
2990
3640

2845
2985
3115
3270
3980

3075
3230
3350
3535
4305

2640
2755
2890
3520

2795
2935
3060
3210
3910

3050
3205
3340
3510
4275

3355
3525
3675
3860
4695

3650
3835
4000
4200
5110

2985
3110
3270
3980

3155
3315
3455
3630
4420

3450
3625
3780
3970
4830

3790
3980
4150
4360
5310

4125
4330
4500
4745
5775

3755
3915
4110
5005

3975
4175
4350
4570
5565

4345
4565
4760
5000
6085

4825
5065
5280
5550
6755

5300
5565
5800
6095
7420

3125
3260
3425
4170

3310
3475
3625
3805
4635

3615
3795
3960
4160
5065

3960
4155
4335
4555
5545

4290
4505
4700
4935
6005

4765
5005
5220
5480
6675

2300
2420
2945

2065
2170
2640

2425
2545
3100

2740
2880
3505

3445
3620
4405

2875
3015
3675

3.0

5500

65
50
40
30
10

4765

65
50
40
30
10

5665

65
50
40
30
10

5050

65
50
40
30
10

5995

65
50
40
30
10

6775

65
50
40
30
10

8705

65
50
40
30
10
5150
5410
5600
5925
7210

8460

For intensive road transport at 65/50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20% please contact the producer.
Tubeless tyres may be used with a tube.

65
50
40
30
10

17

tractor radial tyres | RD

kW 22
hp 30

RD-02 and RD-70 Low profile tyres

for high power in the field and comfort
on the road
> Reduced ground compression
thanks to a larger ground contact area
18

44
60

66
90

88 110 132 162 191 >220

120 150 180 220 260 >300

RD-01 and RD-05 All-round standard

tyres for a wide range of applications

Ground compression
Standard

70 Series

> Excellent transmission of power

due to greater grip and traction

19

> High load capacity with stable

and safe handling on the road
> Improved driving comfort due to
flexible sidewalls
RD-01

> Longer service life coupled with reduced

fuel consumption for low operational costs

RD-05

Traction

Traction

Handling on road

Handling on road

load capacity

load capacity

> Balanced combination of features for various agricultural applications

> Very good grip and traction with much less slip
> Long service life thanks to the wear-resistant tread compound
> Large ground contact patch and lower operating pressure for less soil compaction

RD-02

RD-70

Traction

Traction

Soil protection

Soil protection

Handling on road

Handling on road

load capacity

load capacity

tractor radial tyres | RD

RD-02

RD-02 technical data and load capacities

Tyre size

380/70 R 24

Service
description
LI/SS

125 A8
(125 B)

Rim
(permitted)

W 12
W 13
W 11

Section
width
(mm)

372
382
362

Overall
diameter
(mm)

1190

Loaded
static
radius
(mm)

530

Rolling
circumference
(mm)

3442

Speed
radius
index

0.6
575

145

20

380/70 R 28

420/70 R 28

480/70 R 28

480/70 R 30

480/70 R 34

480/70 R 38

520/70 R 38

127 A8
(127 B)

133 A8
(133 B)

140 A8
(140 B)

141 A8
(141 B)

143 A8
(143 B)

145 A8
(145 B)

150 A8
(150 B)

W 12
W 13
W 11
W 13
W 14 L
W 12
W 15 L
W 16 L
W 14 L
W 15 L
W 16 L
W 14 L
W 15 L
W 16 L
W 14 L
W 15 L
W 16 L
W 14 L
W 16 L
W 18 L
W 15 L

389
399
379

422
432
412

486
496
476

494
504
484

487
497
477

484
494
474

524
544
514

1298

1342

1414

1479

1584

1687

1761

Load values given for 0.4bar and 0.6bar at 40km/h are for calculating dual and triple load values only.
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.

588

607

623

655

708

765

787

3866

4015

4190

4390

4710

5060

5238

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)

625

650

675

700

750

800

825

165

200

260

275

310

340

395

1150
1395

1235
1500

1440
1750

1770
2150

1820
2220

1935
2350

2045
2480

2300
2800

Speed
(km/h)

0.8

1.0

1.2

1.4

1.6

1205
1290
1570

1330
1330
1420
1725

1440
1440
1540
1870

1540
1540
1650
2010

1650
1650
1765
2145

1300
1390
1690

1430
1430
1530
1855

1550
1550
1660
2010

1660
1660
1775
2160

1750
1750
1875
2275

1510
1620
1965

1660
1660
1780
2160

1800
1800
1930
2345

1930
1930
2070
2515

2060
2060
2200
2680

1855
1985
2410

2040
2040
2185
2655

2215
2215
2370
2880

2375
2375
2540
3090

2500
2500
2680
3250

1880
2010
2450

2060
2060
2200
2680

2240
2240
2400
2910

2420
2420
2590
3150

2575
2575
2760
3350

2030
2170
2640

2235
2235
2390
2905

2425
2425
2595
3150

2600
2600
2780
3380

2725
2725
2915
3545

2145
2290
2790

2360
2360
2525
3070

2560
2560
2740
3330

2745
2745
2935
3570

2900
2900
3100
3770

2380
2550
3090

2600
2600
2780
3380

2830
2830
3030
3680

3060
3060
3270
3980

3350
3350
3590
4360

2.0

2475

50
40
30
10

2625

50
40
30
10

3090

50
40
30
10

3750

50
40
30
10

3860

50
40
30
10

4090

50
40
30
10

4350

50
40
30
10

5030

50
40
30
10

For intensive road transport at 50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20% please contact the producer.
Tubeless tyres may be used with a tube.

21

tractor radial tyres | RD

RD-70

RD-70 technical data and load capacities

Tyre size

320/70 R 24

Service
description
LI/SS

116 A8
(116 B)

Rim
(permitted)

W 10
W 11
W9

Section
width
(mm)

320
330
310

Overall
diameter
(mm)

1095

Loaded
static
radius
(mm)

505

Rolling
circumference
(mm)

3276

Speed
radius
index

0.6
525

100

22

420/70 R 24

520/70 R 34

580/70 R 38

130 A8
(130 B)

148 A8
(148 B)

155 A8
(155 B)

W 13
W 14 L
W 12
W 16 L
W 18 L
W 15 L

W 18 L

433
443
423

523
543
513

570

1260

1644

1829

Load values given for 0.4bar and 0.6bar at 40km/h are for calculating dual and triple load values only.
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.

563

734

819

3715

4927

5442

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)

600

775

875

170

355

550

885
1075

1340
1630

2185
2655

2720
3310

Speed
(km/h)

0.8

1.0

1.2

1.4

1.6

930
995
1210

1020
1020
1095
1330

1110
1110
1185
1440

1190
1190
1270
1545

1250
1250
1340
1625

1410
1505
1830

1550
1550
1660
2015

1680
1680
1800
2180

1800
1800
1930
2340

1900
1900
2030
2470

2295
2455
2980

2525
2525
2700
3285

2740
2740
2930
3560

2935
2935
3140
3820

3150
3150
3370
4095

2855
3060
3715

3145
3145
3365
4090

3410
3410
3650
4435

3655
3655
3915
4755

3875
3875
4145
5040

2.0

1875

50
40
30
10

2850

50
40
30
10

4725

50
40
30
10

5815

50
40
30
10

For intensive road transport at 50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20% please contact the producer.
Tubeless tyres may be used with a tube.

23

tractor radial tyres | RD

RD-01

RD-01 technical data and load capacities

Tyre size

280/85 R 24
(11.2 R 24)

Service
description
LI/SS

115 A8
(112 B)

24

320/85 R 24
(12.4 R 24)

340/85 R 24
(13.6 R 24)

380/85 R 24
(14.9 R 24)

420/85 R 24
(16.9 R 24)

280/85 R 28
(11.2 R 28)

320/85 R 28
(12.4 R 28)

340/85 R 28
(13.6 R 28)

380/85 R 28
(14.9 R 28)

420/85 R 28
(16.9 R 28)

380/85 R 30
(14.9 R 30)

122 A8
(119 B)

125 A8
(122 B)

Rim
(permitted)

W9
W 10

Section
width
(mm)

290
300

Overall
diameter
(mm)

1105

W 11
W 10
W9

340
330
320

1152

W 12
W 11

365
355

1186

131 A8
(128 B)

W 12
W 13
W 11

402
412
392

1245

137 A8
(137 B)

W 15
W 14
W 13

470
460
450

1318

W9
W 10

288
298

1190

118 A8
(115 B)

W 11
W 10
W9

332
322
312

1259

127 A8
(124 B)

W 12
W 11

367
357

1293

133 A8
(130 B)

W 12
W 13
W 11

395
405
385

1350

W 15
W 14
W 13

449
439
429

1428

W 12
W 13
W 11

398
408
388

1415

124 A8
(121 B)

139 A8
(136 B)

135 A8
(135 B)

Loaded
static
radius
(mm)

498

510

530

555

576

551

562

580

596

635

635

Rolling
circumference
(mm)

3300

3420

3530

3700

3895

3582

3753

3850

4005

4215

4225

Speed
radius
index

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)
0.6

525

550

575

600

625

575

600

625

650

675

675

85

115

140

185

240

100

130

160

205

250

220

0.8

850
1030

890
960
1160

1045
1270

1095
1175
1425

1145
1395

1205
1290
1565

1365
1660

1430
1530
1860

1595
1940

1675
1795
2175

920
1120

965
1030
1255

1125
1365

1180
1260
1530

1230
1500

1295
1380
1680

1460
1775

1535
1640
1995

1705
2070

1790
1915
2325

1510
1835

1585
1695
2060

1.0

1.2

1.4

1.6

890
980
1050
1280
1100
1205
1290
1570
1205
1325
1420
1720
1575
1575
1685
2050
1845
1845
1970
2395
965
1060
1135
1380
1180
1295
1385
1685
1295
1425
1520
1850
1535
1690
1800
2195
1790
1970
2110
2560
1740
1740
1865
2265

970
1070
1140
1390
1190
1305
1400
1700
1305
1435
1535
1870
1710
1710
1830
2220
2000
2000
2140
2600
1045
1150
1230
1495
1280
1405
1505
1830
1400
1540
1650
2005
1665
1830
1960
2380
1945
2135
2290
2780
1890
1890
2020
2460

1040
1140
1220
1490
1275
1400
1500
1825
1400
1540
1650
2005
1830
1830
1960
2380
2145
2145
2295
2790
1125
1235
1320
1605
1370
1510
1615
1960
1505
1655
1770
2150
1785
1965
2100
2550
2085
2290
2450
2980
2025
2025
2170
2635

1120
1215
1300
1580
1360
1500
1605
1950
1500
1650
1765
2145
1950
1950
2090
2535
2300
2300
2460
2990
1215
1320
1410
1715
1450
1600
1710
2080
1600
1750
1875
2275
1900
2060
2205
2680
2240
2430
2600
3160
2180
2180
2335
2835

2.0

1825

2250

2475

2925

3450

1980

2400

2625

3090

3645

3270

2.4

Speed
(km/h)
3.0

4.0

4.4
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10

25

tractor radial tyres | RD

RD-01

RD-01 technical data and load capacities

Tyre size

420/85 R 30
(16.9 R 30)

Service
description
LI/SS

320/85 R 32
(12.4 R 32)

420/85 R 34
(16.9 R 34)

460/85 R 34
(18.4 R 34)

340/85 R 36
(13.6 R 36)

340/85 R 38
(13.6 R 38)

420/85 R 38
(16.9 R 38)

460/85 R 38
(18.4 R 38)

520/85 R 38
(20.8 R 38)

520/85 R 42
(20.8 R 42)

Section
width
(mm)

Overall
diameter
(mm)

W 15
W 14
W 13

444
434
424

W 16
W 15
W 14

490
480
470

W9
W 11
W 10

305
325
315

1385

142 A8
(139 B)

W 15
W 14
W 13

443
433
423

1571

147 A8
(144 B)

W 16
W 15
W 14

488
478
468

1624

W 12
W 11

365
355

1493

140 A8
(137 B)

26

460/85 R 30
(18.4 R 30)

Rim
(permitted)

145 A8
(142 B)

142 A8
(142 B)

132 A8
(129 B)

133 A8
(133 B)

W 12
W 11

365
355

1475

1540

1556

144 A8
(141 B)

W 15
W 14
W 13

446
436
426

1675

149 A8
(146 B)

W 16
W 15
W 14

473
463
453

1735

W 16
W 18

536
556

1828

155 A8
(152 B)

162 A8
(162 B)

W 16
W 18

537
557

1950

Load values given for 0.4bar and 0.6bar at 40km/h are for calculating dual and triple load values only.
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.

Loaded
static
radius
(mm)

670

685

637

712

727

682

701

764

793

814

891

Rolling
circumference
(mm)

4400

4582

4130

4715

4847

4500

4658

5020

5230

5442

5845

Speed
radius
index

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)
0.6

700

725

650

750

775

725

750

800

825

875

925

270

340

1760
2140

1845
1975
2400

2030
2460

2130
2280
2760
1150
1235
1615

140

290

380

195

215

320

420

530

580

0.8

1865
2265

1955
2095
2545

1395
1695

2250
2405
2925
1335
1465
1570
1905

1430
1740

1500
1605
1955

1965
2390

2065
2210
2685

2255
2745

2370
2535
3080

2725
3310

2860
3060
3720

2860
3470

2995
3205
3895

2145
2605

1.0

1.2

1.4

1.6

1850
2030
2175
2640
2130
2340
2510
3040

2005
2205
2360
2865
2310
2540
2720
3300
1400
1400
1500
1960
2125
2335
2500
3035
2685
2685
2875
3490
1585
1745
1865
2265
1795
1795
1920
2335
2240
2465
2635
3205
2575
2830
3030
3680
3415
3415
3655
4440
3575
3575
3825
4650

2150
2365
2530
3075
2475
2720
2910
3540
1555
1555
1665
2180
2280
2505
2680
3255
2880
2880
3080
3745
1710
1880
2010
2440
1925
1925
2060
2500
2400
2640
2830
3435
2760
3030
3245
3945
3660
3660
3920
4760
3840
3840
4100
4990

2300
2500
2675
3250
2650
2900
3100
3770
1710
1710
1830
2395
2430
2650
2835
3445
3075
3075
3290
4000
1850
2000
2140
2600
2060
2060
2205
2680
2575
2800
3000
3640
3000
3250
3480
4225
3875
3875
4145
5040
4075
4075
4360
5300

1280
1370
1795
1960
2155
2305
2800
2475
2475
2650
3220
1465
1610
1725
2095
1655
1655
1770
2150
2070
2270
2430
2955
2370
2605
2790
3390
3150
3150
3370
4090
3300
3300
3530
4285

2.0

2.4

Speed
(km/h)
3.0

4.0

4.4

3750

4350
1880
1880
2010
2630

2000
2000
2140
2800

2280
2280
2440
2800

4750
4750
5085
6175

7125

2650
2650
2835
3710

3875

3975

4615

3000

3090

4200

4875

5815
4520
4520
4835
5875

For intensive road transport at 50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20% please contact the producer.
Tubeless tyres may be used with a tube.

50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10
50
40
30
10

27

tractor radial tyres | RD

RD-05

RD-05 technical data and load capacities

Tyre size

420/85 R 28
(16.9 R 28)

Service
description
LI/SS

139 B

Rim
(permitted)

W 15
W 14
W 13

Section
width
(mm)

459
449
439

Overall
diameter
(mm)

1431

Loaded
static
radius
(mm)

641

Rolling
circumference
(mm)

4262

Speed
radius
index

0.6
675

250

28

380/85 R 30
(14.9 R 30)

420/85 R 34
(16.9 R 34)

380/80 R 38

480/80 R 42

480/80 R 46

380/90 R 50

480/80 R 50

135 B

147 B

142 B

151 B

158 B

151 B

159 B

W 12
W 13
W 11
W 15
W 14
W13
W 12
W 11
W 13
W 16
W 15
W 14
W 16
W 15
W 14
W 12
W 13
W 11
W 16
W 15
W 14

398
408
388

469
459
449

380
370
390

513
503
495

507
497
487

380
390
370

495
485
475

1427

1593

1595

1850

1960

1949

2065

Load values given for 0.4bar and 0.6bar at 40km/h are for calculating dual and triple load values only.
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.

641

722

730

835

896

888

945

4255

4755

4790

5540

5886

5850

6210

Tyre load capacity (kg) at tyre pressure (bar)

Water
75% (l)

675

750

750

875

925

925

975

220

290

240

440

480

360

500

1705
2070

1510
1835

1865
2265

1455
1770

2170
2840

2270
2760

1845
2415

2370
3100

2.0

Speed
(km/h)

0.8

1.0

1.2

1.4

1.6

1790
1915
2325

1970
1970
2110
2560

2135
2135
2290
2780

2290
2290
2450
2980

2430
2430
2600
3160

2.4

3.0

3645

50
40
30
10

1585
1695
2060

1740
1740
1865
2265

1890
1890
2020
2460

2025
2025
2170
2635

2180
2180
2335
2835

3270

50
40
30
10

1955
2095
2545

2155
2155
2305
2800

2335
2335
2500
3035

2505
2505
2680
3255

2650
2650
2835
3445

2905
2905
3110
3775

3075
3075
3290
4000

1545
1655
2010

1720
1720
1840
2235

1880
1880
2010
2440

2090
2090
2235
2715

2300
2300
2460
2990

2505
2505
2680
3255

2650
2650
2835
3445

2305
2465
3230

2565
2565
2745
3590

2805
2805
3000
3925

3125
3125
3345
4375

3450
3450
3690
4830

5175

2410
2580
3135

2685
2685
2870
3485

2935
2935
3140
3815

3245
3245
3470
4215

3550
3550
3800
4615

3960
3960
4240
5545

4250
4250
4550
5950

1960
2095
2745

2180
2180
2330
3050

2385
2385
2550
3335

2640
2640
2825
3700

2900
2900
3105
4060

3215
3215
3440
4505

3450
3450
3690
4830

2515
2695
3525

2800
2800
2995
3920

3060
3060
3275
4285

3405
3405
3645
4765

3750
3750
3830
5010

4105
4105
4395
5750

4375
4375
4680
6125

4350

50
40
30
10

3900

50
40
30
10
50
40
30
10

6300

50
40
30
10

5175

50
40
30
10

6565

50
40
30
10

For intensive road transport at 50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20% please contact the producer.
Tubeless tyres may be used with a tube.

29

tractor radial tyres | AC

NEW

AC 85 and AC 90 Row Crop narrow tyres

developed specially for row cultivation
> Reduced tyre width eases driving between plants without causing damage
contributing to higher yields. Rounded shoulders and lugs and tyre height also
protect seeds and crops.
30

kg

kg

kg

kg

kg

kg

kg
kg

kg

AC 85/AC 90 vs. standard size tyres

Narrow Row Crop tyres were specially developed for driving between rows without damaging the seeds, roots
and plants. They are suitable for line weeding, crop cultivation, fertilising, spraying and other agricultural activities.

Reduced tyre width

Rounded lugs
AC 85

> Cost efficient thanks to high load capacity, safe road use and maximum
speed up to 50 km/h
kg
kg

31

kg

> Deep lugs provide excellent traction, better directional stability and a high
level of control
> Good self-cleaning properties help keep the tread pattern free of mud,
resulting in less slip, even in difficult conditions

Tractor fitted
with Mitas Row Crop Tyres

Applications
Designed for tractors,
sprayers, self-propelled
sprayers and other
agricultural machinery

AC 85

AC 90

Traction

Traction

crop protection

crop protection

self-cleaning

self-cleaning

Tractor fitted
with standard size tyres

tractor radial tyres | AC

AC 85

AC 90

AC 85, AC 90 technical data and load capacities

Tyre size

270/80 R 32
repl. 9.532

Service
descrip
tion
LI/SS

131 A8
(128 B)

Tread
pattern
Type

AC 90
TL

32

270/95 R 32 *

320/85 R 32
repl. 12.4 R 32

320/90 R 32

320/85 R 34
repl. 12.4 R 34

270/80 R 36

340/85 R 38 *
repl. 13.6 R 38

* in preparation

136 A8
(136 B)

142 A8
(139 B)

134 A8
(131 B)

133 A8
(133 B)

134 A8
(131 B)

148 A8
(145 B)

AC 85
TL

AC 85
TL

AC 85
TL

AC 85
TL

AC 90
TL

AC 85
TL

Rim
(permit
ted)

Section
width
(mm)

Overall
diameter
(mm)

W 10
W9
W8

280
270
260

1225

W9
W 10
W8

275
285
265

1327

W 10
W 11
W9

315
325
305

1385

W 10
W 11
W9

331
341
321

W 10
W 11
W9

315
325
305

1391

1405

W9
W 10
W8

270
280
260

1345

W 12
W 11

365
355

1562

Loaded
static
radius
(mm)

563

602

637

638

642

623

719

Rolling
circumference
(mm)

3690

3976

4130

4190

4230

4015

4685

Speed
radius
index

Water
75%
(l)

Tyre load capacity (kg) at tyre pressure (bar)

1.2

600

625

650

675

675

650

750

100

115

140

130

155

115

215

1035
1110
1275
1450
1555
1190
1275
1465
1670
1785
1400
1500
1725
1960
2100
1470
1575
1810
2060
2205
1445
1545
1775
2020
2165
1105
1180
1355
1545
1655
1675
1790
2060
2345
2510

Speed
(km/h)

1.6

2.0

2.4

2.8

3.2

3.6

4.0

1150
1265
1355
1555
1770
1900
1455
1455
1550
1885
2030
2175
1550
1700
1820
2090
2380
2550
1650
1800
1925
2215
2520
2700
1750
1750
1875
2155
2450
2625
1225
1350
1440
1660
1885
2020
1900
2060
2205
2535
2885
3090

1265
1390
1485
1710
1945
2085
1600
1600
1710
1965
2235
2395
1710
1880
2010
2310
2630
2820
1800
1980
2120
2435
2770
2970
1935
1935
2070
2380
2710
2905
1345
1480
1580
1820
2070
2220
2030
2230
2385
2745
3125
3345

1345
1480
1585
1820
2070
2220
1700
1700
1820
2090
2380
2550
1800
2000
2140
2460
2800
3000
1950
2120
2270
2610
2970
3180
2060
2060
2205
2535
2885
3090
1435
1575
1685
1940
2205
2365
2180
2360
2525
2905
3305
3540

1470
1620
1730
1990
2265
2425
1865
1865
1995
2295
2610
2795
1995
2190
2345
2695
3065
3285

1585
1740
1865
2145
2440
2615
2010
2010
2155
2475
2815
3020
2150
2360
2530
2905
3305
3545

1685
1855
1985
2280
2595
2780
2145
2145
2295
2640
3005
3215
2290
2515
2690
3095
3520
3775

1800
1950
2085
2400
2730
2925
2240
2240
2395
2755
3135
3360
2430
2650
2835
3260
3710
3975

1695
1860
1995
2290
2605
2795
2570
2825
3025
3475
3955
4240

1805
1985
2125
2440
2780
2975
2740
3010
3225
3705
4215
4520

1950
2120
2270
2610
2970
3180
2900
3150
3370
3875
4410
4725

4.4

2845
3050

3310
3545

3875
4150

3100
3325

2995
3205
1570
1725
1845
2125
2415
2590
2385
2620
2800
3220
3665
3930

3115
3335

4650
4980

50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic

33

tractor radial tyres | AC

AC 85

AC 90

AC 85, AC 90 technical data and load capacities

Tyre size

300/85 R 42

Service
descrip
tion
LI/SS

144 A8
(141 B)

Tread
pattern
Type

AC 90
TL

34

300/95 R 42

300/95 R 46 *

380/90 R 46

380/90 R 46

270/95 R 48

340/85 R 48

* in preparation

147 A8
(144 B)

148 A8
(148 B)

149 A8
(146 B)

159 A8
(156 B)

144 A8
(141 B)

152 A8
(149 B)

AC 90
TL

AC 85
TL

AC 85
TL

AC 85
TL

AC 90
TL

AC 85
TL

Rim
(permit
ted)

Section
width
(mm)

Overall
diameter
(mm)

W9
W 10
W8

288
298
278

1574

W9
W 10
W 11

296
306
316

1617

W9
W 10
W 11

305
315
325

1740

W 12
W 13
W 11

392
402
382

1844

W 12
W 13
W 11

392
402
382

1844

W9
W 10
W8

277
287
267

1737

W 12
W 11

358
348

1825

Loaded
static
radius
(mm)

740

753

805

846

846

810

843

Rolling
circumference
(mm)

4715

4904

5265

5542

5542

5220

5481

Speed
radius
index

Water
75%
(l)

Tyre load capacity (kg) at tyre pressure (bar)

1.2

750

775

825

875

875

825

875

140

185

215

330

330

150

230

1465
1570
1805
2055
2200
1605
1715
1970
2245
2405
1685
1800
2070
2355
2525
2280
2440
2805
3195
3425
2280
2440
2805
3195
3425
1475
1580
1815
2070
2215
1890
2025
2325
2650
2840

Speed
(km/h)

1.6

2.0

2.4

2.8

3.2

3.6

4.0

1630
1790
1920
2205
2510
2690
1785
1960
2095
2410
2745
2940
2055
2055
2200
2530
2880
3085
2540
2790
2985
3430
3905
4185
2540
2790
2985
3430
3905
4185
1645
1805
1930
2220
2525
2710
2105
2315
2475
2845
3240
3470

1790
1965
2105
2420
2755
2950
1955
2150
2300
2645
3010
3225
2255
2255
2415
2775
3160
3385
2785
3060
3275
3765
4285
4590
2785
3060
3275
3765
4285
4590
1805
1980
2120
2435
2775
2970
2310
2540
2715
3120
3555
3805

1905
2095
2240
2575
2935
3145
2085
2290
2450
2815
3205
3425
2405
2405
2570
2955
3365
3605
3000
3250
3480
4000
4550
4875
3000
3250
3480
4000
4550
4875
1920
2110
2260
2595
2955
3165
2460
2705
2890
3325
3785
4055

2090
2300
2460
2825
3215
3445
2285
2510
2685
3085
3515
3765
2635
2635
2820
3240
3685
3950

2260
2485
2655
3055
3470
3725
2465
2710
2895
3330
3790
4060
2840
2840
3040
3495
3980
4265

2410
2650
2835
3260
3695
3975
2625
2885
3090
3550
4040
4330
3030
3030
3240
3725
4240
4545

2575
2800
2995
3445
3920
4200
2800
3075
3290
3780
4305
4615
3150
3150
3370
3875
4410
4725

5000
5360
3250
3570
3820
4395
5000
5360
2105
2310
2475
2840
3235
3465
2695
2960
3170
3645
4145
4440

3505
3855
4125
4740
5395
5780
2270
2495
2665
3065
3490
3740
2910
3195
3420
3930
4475
4795

3740
4110
4395
5055
5750
6160
2415
2655
2840
3245
3720
3985
3100
3405
3645
4190
4770
5110

4000
4375
4680
5380
6125
6565
2575
2800
2995
3445
3920
4200
3250
3550
3800
4365
4970
5325

4.4

4075
4365

4455
4770

4675
5010

6340
6790

4105
4395

5255
5630

50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic
50
40
30
20
10
10 cyclic

35

tractor radial tyres | AC

AC 85

AC 90

AC 85, AC 90 technical data and load capacities

Tyre size

320/90 R 50 *
36

380/90 R 50 *

320/90 R 54 *

Service
descrip
tion
LI/SS

150 A8
(150 B)

160 A8
(160 B)

151 A8
(151 B)

Tread
pattern
Type

AC 85
TL

AC 85
TL

AC 85
TL

Rim
(permit
ted)

W 10
W 11
W9

W 12
W 13
W 11

W 10
W 11
W9

Section
width
(mm)

320
330
300

390
400
380

320
330
300

Overall
diameter
(mm)

1849

1940

1952

Loaded
static
radius
(mm)

854

900

906

Rolling
circumference
(mm)

5575

5865

5913

Speed
radius
index

Water
75%
(l)

875

925

925

* in preparation
30km/h (up to 40km/h) load values also apply for low-speed high-torque field work.
For plowing with single driven tyres in a furrow, a minimum inflation pressure of 0.8bar is required.
For intensive road transport at 50/40/30km/h the pressure must be increased by 0.4bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20%, contact the producer.
Load values for cyclic applications apply to low-torque transport operations at max. speeds of 10km/h and for a max. distance of 800 meters before discharging
the load and returning empty.
TL = Tubeless

245

360

255

Tyre load capacity (kg) at tyre pressure (bar)

Speed
(km/h)

1.2

1.6

2.0

2.4

2.8

3.2

3.6

1855
1980
2280
2595
2780

2265
2265
2425
2785
3170
3395

2485
2485
2660
3055
3480
3730

2645
2645
2830
3255
3705
3970

2900
2900
3105
3565
4060
4350

3130
3130
3350
3850
4380
4695

3350
3350
3585
4120
4690
5025

4.0

4925
5275

50
40
30
20
10
10 cyclic

2170
2385
2550
3335
3575

2900
2900
3105
3565
4060
4350

3215
3215
3440
3955
4505
4825

3450
3450
3690
4245
4830
5175

3730
3730
3990
4590
5220
5595

4025
4025
4305
4950
5635
6040

4290
4290
4590
5275
6005
6435

4500
4500
4815
5535
6300
6750

50
40
30
20
10
10 cyclic

1930
2070
2375
2705
2900

2360
2360
2525
2905
3305
3545

2590
2590
2775
3190
3630
3890

2760
2760
2955
3395
3865
4140

3025
3025
3235
3720
4235
4535

3265
3265
3490
4015
4570
4895

3450
3450
3690
4225
4830
5175

5135
5505

4.4

6620
7095

50
40
30
20
10
10 cyclic

37

conversion table

Conversion table

Rim
24

38

28

Standard
Inch

Designation mm
85 Series

11.2 R 24

280/85 R 24 RD-01

12.4 R 24

320/85 R 24 RD-01

80 Series

Designation mm
70 Series

65 Series

Row Crop

320/70 R 24 RD-70
420/65 R 24 RD-03

Standard
Inch

Speed radius
index

11.2 R 24

525

12.4 R 24

550

13.6 R 24

340/85 R 24 RD-01

380/70 R 24 RD-02

440/65 R 24 RD-03

13.6 R 24

575

14.9 R 24

380/85 R 24 RD-01

420/70 R 24 RD-70

480/65 R 24 RD-03

270/80 R 32 AC 90

14.9 R 24

600

16.9 R 24

420/85 R 24 RD-01

540/65 R 24 RD-03

270/95 R 32 AC 85

16.9 R 24

625

11.2 R 28

280/85 R 28 RD-01

11.2 R 28

575

12.4 R 28

320/85 R 28 RD-01

270/80 R 32 AC 90

12.4 R 28

600

13.6 R 28

340/85 R 28 RD-01

380/70 R 28 RD-02

440/65 R 28 RD-03

270/95 R 32 AC 85

13.6 R 28

625

14.9 R 28

380/85 R 28 RD-01

420/70 R 28 RD-02

480/65 R 28 RD-03

320/85 R 32 AC 85

14.9 R 28

650

270/80 R 36 AC 90
16.9 R 28

420/85 R 28 RD-01

480/70 R 28 RD-02

540/65 R 28 RD-03

320/90 R 32 AC 85

16.9 R 28

675

480/70 R 28 RD-02

540/65 R 28 RD-03

320/85 R 34 AC 85

14.9 R 30

675

480/70 R 30 RD-02

540/65 R 30 RD-03

16.9 R 30

700

420/85 R 28 RD-05
30

14.9 R 30

380/85 R 30 RD-01
380/85 R 30 RD-05

16.9 R 30

420/85 R 30 RD-01

600/65 R 28 RD-03
18.4 R 30

460/85 R 30 RD-01

18.4 R 30

725

32

12.4 R 32

320/85 R 32 RD-01

12.4 R 32

650

34

16.9 R 34

420/85 R 34 RD-01

16.9 R 34

750

480/70 R 34 RD-02

540/65 R 34 RD-03

340/85 R 38 AC 85

520/70 R 34 RD-70

600/65 R 34 RD-03

300/95 R 42 AC 90

420/85 R 34 RD-05
18.4 R 34

460/85 R 34 RD-01

36

13.6 R 36

340/85 R 36 RD-01

38

13.6 R 38

340/85 R 38 RD-01

16.9 R 38

420/85 R 38 RD-01

480/70 R 38 RD-02

540/65 R 38 RD-03

18.4 R 38

460/85 R 38 RD-01

520/70 R 38 RD-02

600/65 R 38 RD-03

380/80 R 38 RD-05

300/85 R 42 AC 90
300/95 R 46 AC 85

18.4 R 34

775

13.6 R 36

725

13.6 R 38

750

16.9 R 38

800

18.4 R 38

825

20.8 R 38

875

20.8 R 42

925

20.8 R 46

975

270/95 R 48 AC 90
20.8 R 38

520/85 R 38 RD-01

480/80 R 42 RD-05

580/70 R 38 RD-70

650/65 R 38 RD-03

380/90 R 46 AC 85
340/85 R 48 AC 85
320/90 R 50 AC 85

42

20.8 R 42

520/85 R 42 RD-01

480/80 R 46 RD-05

710/70 R 38 RD-03

650/65 R 42 RD-03

380/90 R 50 AC 85
380/90 R 50 RD-05
320/90 R 54 AC 85

46

20.8 R 46

480/80 R 50 RD-05

39

implement radial tyres | aR

NEW

Agriterra 02 and 03 New generation

of fast and powerful agricultural tyres

AR-01 and AR-02 Agricultural tyres

with high load capacity and working speed

> Excellent self-cleaning properties

AR-01

AR-02

> Low noise emissions due to higher positive footprint share

> Approved for high speed up to 80 km/h

> High-grip thanks to robust lugs

> Wide agricultural use: flat trucks, fast-moving agricultural trailers, tank containers etc.

> Reduced fuel consumption

> Optimal pressure distribution

> Prolonged working life

> Balanced handling on and off the road

40

kg

Fast
&gentle

agriterra 02

kg

High load
capacity

All-steel
construction

agriterra 03

ar-01

kg

load capacity

load capacity

load capacity

road performance

road performance

road performance

field performance

field performance

resistance

field performance

self-cleaning

self-cleaning

resistance

resistance

Agriterra 02
AR-01

ROAD PERFORMANCE

AR-02

FIELD PERFORMANCE

kg

ar-02

load capacity

Agriterra 03

kg

High load
capacity

road performance

Application suitability chart agricultural radial tyres

LOAD CAPACITY

ALL
STEEL

kg

41

implement radial tyres | aR

agriterra 02

agriterra 03

aR-02

Agriterra 02, 03, AR-02

Tyre size

560/60 R 22.5

Tread
pattern
Type

Service
description
LI/SS

AR-02
TL

161 D

Section
width
(mm)

Rim
(permitted)

16.0022.5
(18.0022.5)

Overall
diameter
(mm)

546

1248

Loaded
static
radius
(mm)

563

Rolling
circumference
(mm)

3793

42

600/55 R 26.5

165 D

AGRITERRA 02
TL

AG 20.0026.5

626

1335

585

4033

710/50 R 26.5 *

170 D

AGRITERRA 02
TL

AG 24.0026.5
(AG 20.0026.5)

737

1388

628

4189

650/65 R 30.5 *

176 D

AGRITERRA 03
TL

AG 20.0030.5

705

1621

728

4887

* In preparation
TL = Tubeless

Variation in load capacity with speed dependence

Agriterra 02, Agriterra 03
Speed
Speed category D
Speed
Speed category D

10

15

20

25

30

35

40

+130%

+80%

+73%

+65%

+58%

+51%

+44%

+36%

45

50

55

60

65

70

75

80

+29%

+21%

+14%

+7%

(0)

Tyre load capacity (kg) at tyre pressure (bar)

Speed
(km/h)

0.8

1.2

1.6

2.0

2.4

2.8

3.2

3.6

4.0

1865
2070
2313
2518
3264
2030
2456
2761
3065
3654
2360
2856
3210
3564
4248
2780
3364
3781
4198
5004

2210
2453
2740
2984
3868
2420
2928
3291
3654
4356
2815
3406
3828
4251
5067
3320
4017
4515
5013
5976

2555
2836
3168
3449
4471
2810
3400
3822
4243
5058
3270
3957
4447
4938
5886
3860
4671
5250
5829
6948

2900
3219
3596
3915
5075
3200
3872
4352
4832
5760
3725
4507
5066
5625
6705
4400
5324
5984
6644
7920

3245
3602
4024
4381
5679
3590
4344
4882
5421
6462
4180
5058
5685
6312
7524
4940
5977
6718
7459
8892

3590
3985
4452
4847
6283
3980
4816
5413
6010
7164
4635
5608
6304
6999
8343
5480
6631
7453
8275
9864

3935
4368
4879
5312
6886
4370
5288
5943
6599
7866
5090
6159
6922
7686
9162
6020
7284
8187
9090
10836

4280
4751
5307
5778
7490
4760
5760
6474
7188
8568
5545
6709
7541
8373
9981
6560
7938
8922
9906
11808

4625
5134
5735
6244
8094
5150
6232
7004
7777
9270
6000
7260
8160
9060
10800
7100
8591
9656
10721
12780

65
50
40
30
10
65
50
40
30
10
65
50
40
30
10
65
50
40
30
10

43

implement radial tyres | aR

aR-01

AR-01 technical data and load capacities

Tyre size

385/65 R 22.5
(15 R 22.5)

Tread
pattern
Type

Service
description
LI/SS

AR-01
TL

161 F

Section
width
(mm)

Rim
(permitted)

11.7522.5

389

Overall
diameter
(mm)

1072

Loaded
static
radius
(mm)

485

Rolling
circumference
(mm)

Tyre load capacity (kg) at tyre pressure (bar)

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

2800
3010
3135
3220
3500
5040
4100
4410
4590
4715
5125
7380

3000
3225
3360
3450
3750
5400
4400
4730
4930
5060
5500
7920

3200
3440
3585
3680
4000
5760
4700
5055
5265
5405
5875
8460

3400
3655
3810
3910
4250
6120
5000
5375
5600
5750
6250
9000

3600
3870
4030
4140
4500
6480
5300
5700
5935
6095
6625
9540

3850
4140
4310
4430
4815
6930
5800
6235
6495
6670
7250
10 440

4100
4410
4590
4715
5125
7380

4625
4970
5180
5319
5781
8325

3500
3765
3920
4025
4375
6300

2600
2795
2910
2990
3250
4680
3800
4085
4255
4370
4750
6840

3248

44

445/65 R 22.5
(18 R 22.5)

AR-01
TL

169 F

14.0022.5

454

1150

514

3484

Variation in load capacity with speed dependence

AR-01, AR-02

10

15

20

25

30

35

40

Speed category D

Speed

+95%

+87%

+75%

+60%

+50%

+40%

+35%

+30%

+24%

Speed category F

+150%

+110%

+80%

+65%

+50%

+35%

+25%

+19%

+15%

80

45

50

55

60

65

70

75

Speed category D

Speed

+17%

+11%

+7%

+3%

(0)

Speed category F

+13%

+12%

+11%

+10%

+7.5%

+5%

+2.5%

(0)

3200
3440
3585
3680
4000
5760

Speed
(km/h)
80
65
50
40
30
10
80
65
50
40
30
10

45

tractor diagonal tyres | af

NEW

AF-01 and TL-01 Heavy-duty agroforestry

tractor tyres for the toughest conditions

x xx
xx

> High resistance to puncture thanks to reinforced construction

and durable tread compound

xxxxxxxx
xx

RF

STEEL

Reinforced
construction

Steel
breaker

> Great traction due to specially developed tread pattern

> Very good self-cleaning properties for better grip and less slip

47

> High load capability and transport properties

> Suitable for a wide range of uses in forestry and for heavy agricultural work

AF-01

TL-01

RESISTAnce

RESISTAnce

Traction

Traction

self-cleaning

self-cleaning

Puncture resistance comparison

Thanks to reinforced construction, the radial force needed to puncture the AF-01 tyre is 35 % higher than
in the case of the standard tractor drive tyre Mitas TD-19.

Radial force needed to puncture AF-01 and TD-19

Radial force (daN)

46

AF-01

+35 %
TD-19

Penetration depth (mm)

Compared tyres:
Mitas AF-01 460/8534
(18.434) and Mitas
TD-19 18.434

tractor diagonal tyres | af

AF-01

TL-01

AF-01, TL-01 technical data and load capacities

Tyre size

380/8524
(14.924)

Service
description
LI/SS

137 A8
(134 B)

Tread
pattern
Type

AF-01
TT

Rim
(permit
ted)

W 13
W 11
W 12

Tube

14.924

Loaded
Section Overall
static
width diameter
radius
(mm)
(mm)
(mm)
377
357
367

1244

565

Rolling
circumference
(mm)

3748

Speed Water
radius 75%
(l)
index

600

380/8528
(14.928)

16.930

420/8534
(16.934)

460/8534
(18.434)

139 A8
(136 B)

12 PR
143 A6
(135 A8)

147 A8
(144 B)

152 A8
(149 B)

AF-01
TT

TL-01
TT

AF-01
TT

AF-01
TT

14.928

W 15 L
16.930
W 14 L

W 13
W 14 L
W 15 L

16.934

W 15 L
W 14 L 18.434
W 16 L

386
366
376

429

425
435
445

443
433
453

1354

1485

1582

1643

612

685

719

749

4056

4390

4730

4930

30 km/h (up to 40 km/h) load values also apply for low-speed high-torque field work.
For intensive road transport at 50/40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded.
All load values are valid for ground slopes up to and including 20% (11). When operating on slopes greater than 20%, contact the producer.
TT = Tube Type

650

700

750

775

Speed
(km/h)

1.0

1.2

1.3

1.8

2.0

2.4

150

1285
1425
1525
1875

1450
1600
1710
2085

1750
1950
2085
2505

1850
2050
2195
2715

1945
2140
2290
2925

2120
2300
2460
3170

190

1385
1510
1615
1980

1550
1700
1820
2210

1900
2060
2205
2655

2005
2170
2325
2875

2095
2270
2430
3000

2240
2430
2600
3360

240

1310
1635
1960
2290

1525
1905
2290
2670

1850
2315
2780
3240

1960
2450
2940
3430

2070
2585
3105
3625

2180
2725
3270
3815

265

1775
1940
2075
2550

2000
2180
2335
2840

2430
2650
2835
3410

2550
2785
2980
3695

2650
2900
3100
3975

2800
3075
3290
4300

350

2020
2225
2380
2925

2300
2500
2675
3255

2800
3075
3290
3925

2940
3225
3450
4265

3060
3355
3590
4615

3250
3550
3800
4980

48

W 13
W 11
W 12

Tyre load capacity (kg) at tyre pressure (bar)

2.8

3370

50
40
30
10

3585

50
40
30
10

4060

40
30
20
10

4555

50
40
30
10

5270

50
40
30
10

49

tractor diagonal tyres | TD

23

23 inclined
blocks

Classic
design

50

51

TD-05

Unique tread pattern with 23 degree

inclined blocks for better traction and
self-cleaning properties. The reinforced
shoulder prevents side-slipping and helps
overall tyre strength.

TD series tractor drive diagonal tyres

for tractors and other self-propelled
agricultural machinery
kg

kg

TD-13

A classic design for tractors, well-tested

and proven.

kg

Great
traction

TD-02

Universal tread pattern with excellent

traction for a wide range of applications.

Agricultural +
industrial use

TD-01

Durable traction pattern, also suitable

for industrial use.

Very deep
tread lugs

TD-17

Pattern featuring increased tread lug depth

giving better traction and less slip in difficult
conditions.

Increased
rib center

TD-19

Traction tread pattern with larger rib surface

in the central part.

tractor diagonal tyres | TD

TD-01

TD-02

TD-05

TD-13

TD-17

TD-19

TD Technical data and load capacities

Tyre size

8.320

Tread
pattern

TD-13

Type

TT

Rim
(permitted)

W 7 (W 6)

Tube

8.320

Section
width
(mm)

211

Overall
diameter
(mm)

895

Loaded
static
radius
(mm)

416

Rolling
circumference
(mm)

Ply
rating
PR

2640
6 PR

52

8.324

TD-02

TT

W 7 (W 6)

8.324/
9.524

211

995

470

2935
6 PR

9.524

TD-02

TT

W 8 (W 7)

8.324/
9.524

241

1050

495

TD-02

TT

W 10 (W 9)

11.224

284

1105

520

11.224

12.424

TD-19

TD-19

TD-02

TT

W 10 (W 9)

TL

W 10 (W 9)

TT

W 11
(W 9, W 10)

11.224

(11.224)

12.424

284

284

315

1105

1105

1160

520

520

539

12.424

TD-19

TT

12.424

315

1160

539

3300

12.424

TD-19

TL

(12.424)

315

1160

539

14.924

TD-02

TD-02

TL

TT

W 13
(W 11, W 12)

(14.924)

W 13
(W 11, W 12)

14.924

378

378

1265

1265

581

581

30

40

410

370

0.8

660

580

510

460

1.2

785

695

610

550

1.6

915

810

710

630

2.0

855

730

610

490

1.5
1.8

940

800

670

540

1030

880

735

590

2.1

1120

960

800

650

2.4

1220

1045

870

700

1.8

1330

1140

950

760

2.1

1465

1255

1045

840

2.5

1570

1345

1120

900

2.8

1330

1140

950

760

1.5

1485

1270

1060

850

1.8

1620

1385

1155

925

2.1

1750

1500

1250

1000

2.4

1330

1140

950

760

1.5

1485

1270

1060

850

1.8

1620

1385

1155

925

2.1

1750

1500

1250

1000

2.4

10 PR

119 A8

1970
2040

1450
1510

1400
1460

1310
1360

2.8
3.0

1580

1355

1130

905

1.5

1700

1460

1215

970

1.7

1835

1570

1310

1050

2.0

1960

1680

1400

1120

2.3

1580

1355

1130

905

1.5

1700

1460

1215

970

1.7

1835

1570

1310

1050

2.0

1960

1680

1400

1120

2.3

2420

1790

1720

1610

2.9

2520

1860

1800

1680

3.1

2610

1930

1860

1740

3.3

2700

2000

1930

1800

3.5

1795

1535

1280

1025

1.0

1990

1705

1420

1135

1.2

3473
120 A6 (112 A8)

3473
120 A6 (112 A8)

3473
128 A8

3795

3795

20
465

116 A6 (108 A8)

12 PR
14.924

10
530

8 PR

8 PR
W 11
(W 9, W 10)

116 A6 (108 A8)

3300

8 PR
W 11
(W 9, W 10)

112 A6 (104 A8)

3300
8 PR

11.224

100 A6 (93 A8)

3095
8 PR

11.224

104/92 A8

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

6 PR

123 A6 (116 A8)

2170

1860

1550

1250

1.4

8 PR

128 A6 (121 A8)

2345
2520

2010
2160

1675
1800

1340
1450

1.6
1.8

53

tractor diagonal tyres | TD

TD-01

TD-02

TD-05

TD-13

TD-17

TD-19

TD Technical data and load capacities

Tyre size

14.924

Tread
pattern

TD-19

Type

TT

Rim
(permitted)

W 13
(W 11, W 12)

Tube

14.924

Section
width
(mm)

378

Overall
diameter
(mm)

1265

Loaded
static
radius
(mm)

581

Rolling
circumference
(mm)

Ply
rating
PR

10

20

30

40

128 A6 (121 A8)

1990
2170
2345
2520

1705
1860
2010
2160

1420
1550
1675
1800

1135
1250
1340
1450

1.2
1.4
1.6
1.8

133 A6 (125 A8)

2240
2450
2665
2885

1920
2100
2285
2470

1600
1750
1905
2060

1280
1400
1525
1650

1.1
1.3
1.5
1.7

133 A6 (125 A8)

2240
2450
2665
2885

1920
2100
2285
2470

1600
1750
1905
2060

1280
1400
1525
1650

1.1
1.3
1.5
1.7

156 A8

4785
5430
6000

3470
3940
4360

3380
3830
4160

3190
3620
4000

1.9
2.2
2.5

156 A8

4350
4875
5475
6000

3565
4000
4490
4920

3100
3480
3905
4280

2900
3250
3650
4000

1.1
1.4
1.7
2.0

6 PR

112 A6 (104 A8)

1260
1415
1570

1080
1210
1345

900
1010
1120

720
810
900

1.3
1.5
1.8

8 PR

118 A6 (110 A8)

1710
1850

1465
1585

1220
1320

975
1060

2.1
2.4

123 A6 (116 A8)

1445
1620
1800
2005
2170

1235
1385
1540
1715
1860

1030
1155
1285
1430
1550

825
925
1030
1145
1250

1.1
1.4
1.7
2.0
2.3

117 A6 (109 A8)

1445
1620
1800

1235
1385
1540

1030
1155
1285

825
925
1030

1.1
1.4
1.7

128 A6 (121 A8)

2005
2170
2335
2535

1715
1860
2000
2175

1430
1550
1650
1790

1145
1250
1335
1450

2.0
2.3
2.5
2.8

121 A6 (113 A8)

1570
1720
1875
2030

1345
1475
1610
1740

1120
1230
1340
1450

895
985
1070
1150

1.0
1.2
1.4
1.6

3795
8 PR

54

16.924

TD-02

TT

W 15 L
(W14 L)

16.924

429

1335

620

3940
8 PR

16.924

TD-13

TT

W 15 L
(W 14 L)

16.924

429

1335

620

3940
8 PR

18.426

23.126

TD-19

TD-01

TL

TL

W 16 L
(W 15 L)

DW 20

(18.426)

467

1450

663

4285
12 PR

(23.126)

587

1605

760

4720
14 PR

11.228
11.228

12.428

TD-02
TD-02

TD-02

TT

W 10
(W 9)

11.228

TT

W 10
(W 9)

11.228

TT

W 11
(W 10)

12.428

284
284

315

1205
1205

1260

565
565

598

3555
3555

3750
8 PR

12.428

12.428

TD-19

TD-19

TT

TT

W 11
(W 10)

W 11
(W 10)

12.428

315

1260

598

3750
6 PR

12.428

315

1260

598

3750
10 PR

13.628

TD-19

TT

W 12
(W 11)

13.628

345

1310

612

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

3853
6 PR

55

tractor diagonal tyres | TD

TD-01

TD-02

TD-05

TD-13

TD-17

TD-19

TD Technical data and load capacities

Tyre size

14.928

Tread
pattern

TD-19

Type

TT

Rim
(permitted)

W 13
(W 12)

Tube

14.928

Section
width
(mm)

378

Overall
diameter
(mm)

1365

Loaded
static
radius
(mm)

627

Rolling
circumference
(mm)

Ply
rating
PR

10

20

30

40

130 A6 (122 A8)

1905
2115
2395
2660

1630
1810
2050
2280

1360
1510
1710
1900

1090
1210
1370
1500

1.0
1.2
1.5
1.8

8 PR

135 A6 (127 A8)

2355
2730
3055

2015
2340
2615

1680
1950
2180

1345
1560
1750

1.1
1.4
1.7

10 PR

139 A6 (131 A8)

3305
3400

2830
2915

2360
2430

1890
1950

1.9
2.0

8 PR

135 A6 (127 A8)

2355
2730
3055

2015
2340
2615

1680
1950
2180

1345
1560
1750

1.1
1.4
1.7

10 PR

139 A6 (131 A8)

3305
3400

2830
2915

2360
2430

1890
1950

1.9
2.0

8 PR

137 A6 (129 A8)

2410
2885
3220

2065
2470
2760

1720
2060
2300

1375
1650
1850

1.1
1.4
1.7

4113
8 PR

56

16.928

TD-02

TT

W 15 L
(W 14 L)

16.928
16.928

429

1435

670

4235

429

1435

670

4235

429

1435

670

4235

16.928

TD-02

TT

W 15 L
(W 14 L)

16.928

TD-13

TT

W 15 L
(W 14 L)

16.928
16.928

429

1435

670

4235

429

1485

685

4390

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

16.928

TD-13

TT

W 15 L
(W 14 L)

16.930

TD-13

TT

W 15 L
(W 14 L)

16.930
16.930

429

1485

685

4390

10 PR

140 A6 (132 A8)

3500

3000

2500

2000

2.0

16.930

429

1485

685

4390

12 PR

143 A6 (135 A8)

3815

3270

2725

2180

2.3

8 PR

137 A6 (129 A8)

2410
2885
3220

2065
2470
2760

1720
2060
2300

1375
1650
1850

1.1
1.4
1.7

10 PR

140 A6 (132 A8)

3500

3000

2500

2000

2.0

139 A6 (131 A8)

2645
3110
3400

2270
2665
2915

1890
2220
2430

1515
1775
1950

0.9
1.2
1.4

8 PR

139 A6 (131 A8)

2645
3110
3400

2270
2665
2915

1890
2220
2430

1515
1775
1950

0.9
1.2
1.4

12 PR

149 A6 (141 A8)

4355
4550

3730
3900

3110
3250

2490
2575

2.1
2.3

14 PR

152 A6 (144 A8)

4745
4970

4070
4260

3390
3550

2710
2800

2.5
2.7

110 A6 (102 A8)

1190
1290
1390
1480

1020
1100
1190
1270

850
920
990
1060

680
740
790
850

1.5
1.7
1.9
2.1

16.930

TD-13

TT

W 15 L
(W 14 L)

16.930

TD-13

TT

W 15 L
(W 14 L)

16.930

TD-17

TT

W 15 L
(W 14 L)

16.930
16.930

429

1485

685

4390

467

1550

714

4540

429

1485

685

4390

16.930

TD-17

TT

W 15 L
(W 14 L)

18.430

TD-02

TT

W 16 L
(W 15 L)

16.930

TT

W 16 L
(W 15 L)

16.930
16.930

467

1550

714

4540

18.430

TD-13

8 PR
467

1550

714

4540

18.430

TD-13

TT

W 16 L
(W 15 L)

18.430

TD-13

TT

W 16 L
(W 15 L)

16.930

467

1550

714

4540

9.532

TD-13

TT

W 8 (W 7)

9.532

241

1250

597

3695
6 PR

57

tractor diagonal tyres | TD

TD-01

TD-02

TD-05

TD-13

TD-17

TD-19

TD Technical data and load capacities

Tyre size

12.432

Tread
pattern

TD-13

Type

TT

Rim
(permitted)

W 11
(W 9, W 10)

Tube

12.432

Section
width
(mm)

315

Overall
diameter
(mm)

1360

Loaded
static
radius
(mm)

633

Rolling
circumference
(mm)

Ply
rating
PR

3975
6 PR

58

16.934

TD-02

TT

W 15 L
(W 14 L)

16.934

429

1585

724

4680

16.934

TD-02

TT

W 15 L
(W 14 L)

16.934

429

1585

724

4680

16.934

TD-17

TT

W 15 L
(W 14 L)

16.934

429

1585

724

4680

18.434

TD-02

TT

W 16 L
(W 15 L)

467

1650

770

TD-19

TT

W 16 L
(W 15 L)

16.934
18.434

467

1650

770

TT

W 16 L
(W 15 L)

16.934
18.434

467

1650

770

4865

18.434

TD-19

TT

W 16 L
(W 15 L)

16.934
18.434

467

1650

770

4865

TT

W 11
(W 10)

12.436

TD-13

12.436

315

1465

685

12.436

TD-13

TT

12.436

315

1465

685

13.636

TD-13

TT

13.636

345

1515

698

1390

1160

930

1.3

1755

1505

1255

1005

1.5

1905

1630

1360

1090

1.7

2620

2245

1870

1495

1.1

2150

1720

1.4

2915

2430

1950

1.7

10 PR

142 A6 (134 A8)

3710

3180

2650

2120

2.0

2620

2245

1870

1495

1.1

3010

2580

2150

1720

1.4

3400

2915

2430

1950

1.7

3050

2615

2180

1745

1.0

3380

2900

2415

1930

1.2

3710

3180

2650

2120

1.4

3955

3390

2825

2260

1.6

4200

3600

3000

2430

1.8

4580

3925

3270

2620

2.1

4830

4140

3450

2800

2.3

3050

2615

2180

1745

1.0

3380

2900

2415

1930

1.2

3710

3180

2650

2120

1.4

3955

3390

2825

2260

1.6

4200

3600

3000

2430

1.8

4580

3925

3270

2620

2.1

4830

4140

3450

2800

2.3

1610

1380

1150

920

1.1

1750

1500

1250

1000

1.3

1890

1620

1350

1080

1.5

2030

1740

1450

1150

1.7

2610

2240

1865

1490

2.7

2750

2360

1965

1570

2.9

2900

2485

2070

1655

3.1

3050

2615

2180

1750

3.3

1625

1390

1160

930

0.9

1895

1625

1355

1085

1.2

2080

1780

1485

1190

1.4

2310

1980

1650

1320

1.6

139 A6 (131 A8)

151 A6 (144 A8)

8 PR

142 A6 (134 A8)

10 PR

146 A6 (139 A8)

12 PR

151 A6 (144 A8)

4330
121 A6 (113 A8)

4330
12 PR

W 12
(W 11)

1.1

1625

2580

6 PR
W 11
(W 10)

40
850

3400

4865

TD-19

30
1065

3010

4865

18.434

20
1275

139 A6 (131 A8)

12 PR
18.434

10
1490

8 PR

8 PR

16.934
18.434

119 A6 (111 A8)

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

135 A6 (127 A8)

4447
6 PR

125 A6 (118 A8)

59

tractor diagonal tyres | TD

TD-01

TD-02

TD-05

TD-13

TD-17

TD-19

TD Technical data and load capacities

Tyre size

12.438

Tread
pattern

TD-17

Type

TT

Rim
(permitted)

W 11
(W 10)

Tube

12.438

Section
width
(mm)

320

Overall
diameter
(mm)

1515

Loaded
static
radius
(mm)

719

Rolling
circum
ference
(mm)

Ply
rating
PR

8 PR
13.638

TD-02

TT

W 12
(W 11)

13.638

345

1565

740

13.638

TD-13

TT

13.638

345

1565

740

TD-13

TT

W 12
(W 11)

13.638

345

1565

740

15.538

TD-05

TD-05

TT

TT

W 13
(W 12)

14.938

W 14 L

15.538

380

1640

760

1580

745

TD-13

TT

W 15 L
(W 14 L)

16.938

429

1685

795

TD-19

TT

W 16 L
(W 15 L)

18.438

467

1750

814

30 km/h (up to 40 km/h) load values also apply for low-speed high-torque field work.
For intensive road transport at 40/30 km/h the pressure must be increased by 0.4 bar. Maximum inflation pressure should never be exceeded.
For harvesting machines and front-end loader tractor application the Inflation Pressure must be increased by 0.4 bar.
All load values are valid for ground slopes up to and including 20 % (11). When operating on slopes greater than 20 %, contact the producer.
TL = Tubeless
TT = Tube Type

1450
1730
1885
2040

1210
1440
1570
1700

970
1150
1255
1360

0.9
1.2
1.4
1.6

126 A6 (119 A8)

1695
2015
2200
2380

1450
1730
1885
2040

1210
1440
1570
1700

970
1150
1255
1360

0.9
1.2
1.4
1.6

139 A6 (131 A8)

2920
3075
3235
3400

2500
2635
2770
2915

2085
2195
2310
2430

1670
1755
1850
1950

2.9
3.1
3.3
3.5

129 A6 (122 A8)

2190
2380
2590

1880
2040
2220

1565
1700
1850

1250
1360
1480

1.0
1.2
1.4

133 A6 (125 A8)

2470
2655
2885

2120
2275
2475

1765
1895
2060

1400
1520
1650

1.4
1.6
1.8

141 A6 (133 A8)

2620
3050
3325
3605

2245
2615
2850
3090

1870
2180
2375
2575

1495
1745
1900
2060

1.0
1.3
1.5
1.7

143 A6 (135 A8)

3025
3485
3815

2590
2990
3270

2160
2490
2725

1730
1990
2180

0.9
1.2
1.4

5091
8 PR

18.438

126 A6 (119 A8)

1695
2015
2200
2380

4661
8 PR

16.938

127 A6 (120 A8)

1.7
1.9
2.1
2.3

4838
6 PR

394

40
1185
1255
1330
1400

4670
14 PR

14.938

30
1480
1570
1660
1750

4670
6 PR

13.638

20
1775
1885
1990
2100

4615
6 PR

W 12
(W 11)

10
2070
2200
2325
2450

4514

60

5216
8 PR

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

61

tractor diagonal tyres

Variation in load capacity with speed dependence

Tractor Radial & Diagonal
Speed (km/h)
Speed category

10

15

20

25

30

35

A6
A8
D

+130%
+130%
+130%

+70%
+70%
+70%

+40%
+50%
+40%

+30%
+34%
+34%

+20%
+23%
+23%

+7%
+11%
+18.5%

(0)
+7%
+15%

10%
+3%
+12%

40

45

50

55

60

65

70

A6
A8
D

20%
(0)
+9.5%

4%
+7%

9%
+5%

+3%

+1.5%

(0)

9%

Speed (km/h)
62

Speed category

Water balasting

Equivalent sizes with respect to overall diameter

Tyre size

Water (l)

Standard

85% Series

70% Series

8.320
8.324
9.524
11.224
12.424
14.924
16.924
18.426
23.126
11.228
12.428
13.628
14.928
16.928
16.930
18.430
9.532
12.432
16.934
18.434
12.436
12.438
13.638
14.938
15.538
16.938
18.438

45
50
60
70
80
150
210
305
470
90
110
140
180
220
240
320
80
140
250
330
150
170
190
220
245
280
370

11.2 R 24
12.4 R 24
13.6 R 24
14.9 R 24
16.9 R 24
11.2 R 28
12.4 R 28
13.6 R 28
14.9 R 28
16.9 R 28
14.9 R 30
16.9 R 30
18.4 R 30
12.4 R 32
16.9 R 34
18.4 R 34
13.6 R 36
13.6 R 38
16.9 R 38
18.4 R 38
20.8 R 38
20.8 R 42

280/85 R 24
320/85 R 24
340/85 R 24
380/85 R 24
420/85 R 24
280/85 R 28
320/85 R 28
340/85 R 28
380/85 R 28
420/85 R 28
380/85 R 30
420/85 R 30
460/85 R 30
320/85 R 32
420/85 R 34
460/85 R 34
340/85 R 36
340/85 R 38
420/85 R 38
460/85 R 38
520/85 R 38
520/85 R 42

320/70 R 24

65% Series

380/70 R 24
420/70 R 24
480/70 R 24

420/65 R 24
440/65 R 24
480/65 R 24
540/65 R 24

380/70 R 28
420/70 R 28
480/70 R 28

440/65 R 28
480/65 R 28
540/65 R 28

480/70 R 30

540/65 R 30

480/70 R 34
520/70 R 34

540/65 R 34
600/65 R 34

480/70 R 38
520/70 R 38
580/70 R 38
710/70 R 38

540/65 R 38
600/65 R 38
650/65 R 38
650/65 R 42

63

implement diagonal tyres | im

IM series implement non-traction tyres

with great transportation properties

64

Drive wheels
applicable

IM-01

Tested and proven tread

pattern for transportation,
also suitable for powered
wheels.

Drive wheels
applicable

IM-02

Tread pattern with excellent

traction for a wide range
of applications.

Suitable for
meadowland

Classic
design

IM-03

A classic implement design

for universal use.

IM-04

Modern universal tread

pattern suitable for a wide
range of agricultural uses.

Suitable for
meadowland

IM-08

Ribbed pattern without any

lateral tread elements,
suitable for meadowland use
and transport service.

IM-06

Ribbed pattern for all sorts

of applications.

IM-07

Pattern with rolling rib

profile without any lateral
tread elements. Suitable
for meadowland use or soil
cultivation.

Low ground
pressure

IM-09

Traction pattern with strong

side lugs. Low inflation
pressure for reduced soil
compaction.

IM-10

Ribbed pattern without any

lateral tread elements.
Suitable for soil cultivation and
for light transport applications.

65

implement diagonal tyres | im

IM-01

IM-02

IM-03

IM-04

IM-06

IM-07

im-08

IM-10

im-09

IM technical data and load capacities

Tyre size

4.0010

Tread
pattern

IM-06

Type

TT

Rim
(permitted)

3.00D10

Tube
Flap

4.0010

Section
width
(mm)

114

Overall
diameter
(mm)

465

Loaded
static
radius
(mm)

230

Rolling
circumference
(mm)

Ply
rating
PR

1365

66

4 PR

10.0/8012

IM-04

TT/TL

9.0012
(7.0012)

10.0/8012

264

710

316

10.0/8012

IM-04

IM-08

TL

TL

9.0012
(7.0012)

9.0012
(7.0012)

10.0/8012

264

710

316

264

735

335

IM-10

TT/TL

6.7514.5

200

620

285

10.0/7515.3

IM-04

TT/TL

9.0015.3

264

760

351

112 A8

1823

10 PR
1015 HS
10/7515

117 A8

2160
8 PR

200/6014.5

112 A8

2085
10 PR

10.0/8012

62 A6

2085
8 PR

10.0/8012

Service
description
LI/SS

102 A8

2235

10.0/7515.3

IM-04

TT/TL

9.0015.3

1015 HS
10/7515

264

760

351

2235

10.0/7515.3

IM-04

TT/TL

9.0015.3

1015 HS
10/7515

264

760

351

2235

10.0/7515.3

IM-04

TL

9.0015.3

1015 HS
10/7515

264

760

351

2235

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

10

20

30

40

200

175

155

140

1.00

240

210

185

165

1.50

285

250

220

200

2.00

325

285

250

225

2.50

340

300

265

240

2.75

50

1175

1060

940

840

755

1.75

1225

1105

980

875

790

2.00

1330

1200

1065

950

855

2.30

1360

1220

1085

970

875

2.50

1450

1305

1160

1035

930

2.75

1570

1410

1255

1120

1010

3.10

1650

1485

1320

1180

1060

3.40

1745

1570

1395

1245

1120

3.70
3.90

1800

1620

1440

1285

1155

1175

1060

940

840

755

1.75

1225

1105

980

875

790

2.00

1330

1200

1065

950

855

2.30

1360

1220

1085

970

875

2.50

1450

1305

1160

1035

930

2.75

1570

1410

1255

1120

1010

3.10

600

540

480

430

390

1.50

720

650

575

515

465

2.00

805

725

645

575

520

2.50

880

795

705

630

565

3.00

960

865

765

685

615

3.50

1035

930

830

740

665

4.00

1115

1000

890

795

715

4.50

1190

1070

950

850

765

5.00

1665

1500

1335

1190

1070

2.50

1850

1665

1480

1320

1190

3.00

1975

1775

1580

1410

1270

3.50

10 PR

122 A8

2100

1890

1680

1500

1350

4.00

12 PR

125 A8

2240
2310

2015
2080

1790
1850

1600
1650

1440
1485

4.50
4.75

14 PR *

130 A8

2430
2660

2185
2395

1945
2130

1735
1900

1560
1710

5.00
5.50

3025

2720

2420

2160

1945

6.00

3045
3435

2705
3050

2415

2175
2455

6.50

143 A8

3380
3815

18 PR *

2725

7.10

67

implement diagonal tyres | im

IM-01

IM-02

IM-03

IM-04

IM-06

IM-07

im-08

IM-10

im-09

IM technical data and load capacities

Tyre size

68

Tread
pattern

Type

Rim
(permitted)

Tube
Flap

Section
width
(mm)

Overall
diameter
(mm)

Loaded
static
radius
(mm)

Rolling
circumference
(mm)

11.5/8015.3

IM-04

TT/TL

9.0015.3

11.5/8015

290

845

386

2485

11.5/8015.3

IM-04

TT/TL

9.0015.3

11.5/8015

290

845

386

2485

11.5/8015.3

IM-04

TT/TL

9.0015.3

11.5/8015

290

845

386

2485

11.5/8015.3

IM-04

TT/TL

9.0015.3

11.5/8015

290

845

386

2485

12.5/8015.3

IM-04

TL

9.0015.3

307

889

436

Ply
rating
PR

IM-07

TL

13.0015.5

405

875

380

2575

400/6015.5

IM-07

TL

13.0015.5

405

875

380

2575

TT

7.00I16
(7.0401.5)

10.5016

274

945

432

15.0/5517

IM-04

IM-04

TL

TL

13.0017
(1317)

13.0017

15.0/5517

391

850

410

391

850

410

IM-04

TL

16.0017

491

866

390

50
1330
1565
1710

2.50
3.00
3.50

2815
2970

2535
2670

2250
2375

2010
2120

1810
1910

3.75
4.00

14 PR

139 A8

3260
3400

2935
3060

2610
2720

2330
2430

2095
2185

4.50
4.75

16 PR *

141 A8

3470
3605

3125
3245

2780
2885

2480
2575

2230
2320

5.00
5.40

141 A8

2920
3110
3305
3485
3605

2625
2795
2975
3135
3245

2335
2485
2645
2790
2885

2085
2220
2360
2490
2575

1875
2000
2125
2240
2320

3.25
3.50
3.70
4.00
4.30

140 A8

2015
2185
2520
2800
3150
3500

1815
1965
2270
2520
2835
3150

1615
1745
2015
2240
2520
2800

1440
1560
1800
2000
2250
2500

1295
1405
1620
1800
2025
2250

1.25
1.50
2.00
2.50
3.00
3.50

2610

145 A8

4060

3650

3250

144 A8

2870
2970
3220
3470
3710
3920

2585
2670
2900
3125
3340
3530

2295
2375
2575
2780
2970
3135

2900
2050
2120
2300
2480
2650
2800

1845
1910
2070
2230
2385
2520

3.60
3.25
3.50
4.00
4.50
5.00
5.25

131 A8

2325
2595
2730

2090
2335
2455

1860
2080
2185

1660
1855
1950

1495
1670
1755

2.00
2.40
2.60

137 A8

2830
2970
3050
3135
3220

2545
2670
2745
2820
2900

2260
2375
2440
2510
2575

2020
2120
2180
2240
2300

1820
1910
1960
2015
2070

2.80
3.10
3.30
3.50
3.70

144 A8

2605
2980
3305
3625
3920

2345
2685
2975
3265
3530

2085
2385
2645
2900
3135

1860
2130
2360
2590
2800

1675
1915
2125
2330
2520

2.00
2.50
3.00
3.50
4.00

2780

2499

2499
14 PR

19.0/4517

40
1475
1735
1900

134 A8

10 PR

15.0/5517

30
1650
1945
2130

12 PR

14 PR
15.0/5517

20
1860
2185
2395

130 A8

14 PR

IM-01

10

10 PR

2615

400/6015.5

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

2065
2430
2660

14 PR

10.5016

Service
description
LI/SS

2546
14 PR

69

implement diagonal tyres | im

IM-01

IM-02

IM-03

IM-04

IM-06

IM-07

im-08

IM-10

im-09

IM technical data and load capacities

Tyre size

19.0/4517

Tread
pattern

IM-04

Type

TL

Rim
(permitted)

Tube
Flap

16.0017

Section
width
(mm)

491

Overall
diameter
(mm)

866

Loaded
static
radius
(mm)

390

Rolling
circum
ference
(mm)

Ply
rating
PR

2546
18 PR

70

500/5017

500/5017

12.5/8018

12.5/8018

12.5/8018

12.5/8018

13.0/6518

IM-07

IM-07

IM-03

IM-03

IM-04

IM-04

IM-04

TL

TL

TT

TT

TT

TT

TT

16.0017

500

16.0017

1118
(918)

1118
(918)

1118
(918)

1118
(918)

1118

500

1218 HS
12.518

1218 HS
12.518

1218 HS
12.518

1218 HS
12.518

13.0/6518

308

308

308

308

336

940

940

965

965

965

965

890

420

420

444

444

444

444

412

IM-02

TT

9A18

12.0018

370

1128

514

2763

TO 2

TT/TL

9A18

12.0018

370

1128

514

30

40

50

4090

3650

3285

4.75

5320

4790

4255

3800

3420

5.00

5545

4990

4435

3960

3565

5.25

5775

5195

4620

4125

3715

5.50

3330

3000

2665

2380

2140

2.00

3815

3435

3050

2725

2455

2.50

4200

3780

3360

3000

2700

3.00

4095

3640

3250

2925

3.50

4985

4485

3985

3560

3200

4.00

18 PR

155 A8

5425

4880

4340

3875

3490

4.40

2715

2445

2175

1940

1745

2.25

2885

2595

2305

2060

1855

2.50

3305

2975

2645

2360

2125

3.00

3565

3205

2850

2545

2290

3.50

3870

3485

3095

2765

2490

4.00

3655

3250

2900

2610

4.25

14 PR

145 A8

4060
4145

3730

3315

2960

2665

4.50

16 PR

147 A8

4305

3875

3445

3075

2770

5.00

2715

2445

2175

1940

1745

2.25

2885

2595

2305

2060

1855

2.50

3305

2975

2645

2360

2125

3.00

3565

3205

2850

2545

2290

3.50

3870

3485

3095

2765

2490

4.00

3655

3250

2900

2610

4.25

14 PR

145 A8

4060
4145

3730

3315

2960

2665

4.50

16 PR

147 A8

4305

3875

3445

3075

2770

5.00

2270

2040

1815

1620

1460

2.00

2575

2320

2060

1840

1655

2.50

2885

2595

2305

2060

1855

3.00

3220

2900

2575

2300

2070

3.50

3400

3060

2720

2430

2185

4.00

3605

3245

2885

2575

2320

4.50

3815

3435

3050

2725

2455

5.00

3555

3200

2845

2540

2285

2.50

4200

3780

3360

3000

2700

3.00

4690

4220

3750

3350

3015

3.50

5040

4535

4030

3600

3240

4.00

5600

5040

4480

4000

3600

4.50

2615

143 A8

3315

3315

20
4600

4550

2840

2840

10
5110

149 A8

2840

2840

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

14 PR

12 PR
13.0018

157 A8

2763

16 PR
13.0018

Service
description
LI/SS

150 A8
140 K

71

implement diagonal tyres | im

IM-01

IM-02

IM-03

IM-04

IM-06

IM-07

im-08

im-09

IM-10

IM technical data and load capacities

Tyre size

72

14.5/8018

Tread
pattern

Type

IM-03

TT

Rim
(permitted)

1118
(1218)

Tube
Flap

14.5/8018

Section
width
(mm)

372

Overall
diameter
(mm)

1045

Loaded
static
radius
(mm)

475

Rolling
circumference
(mm)

Ply
rating
PR

IM-09

TL

16.0022.5

503

1172

511

550/6022.5

IM-09

TL

16.0022.5

537

1232

534

For a non-standard version, please contact a producer.

These tyres are for normal agricultural use and not for continuous highway service.
TL = Tubeless
TT = Tube Type

20

30

40

50

155 A8

2565
2980
3390
3795
4195
4610
4885

2280
2650
3015
3370
3730
4100
4340

2035
2365
2690
3010
3330
3660
3875

1830
2130
2420
2710
2995
3295
3490

1.50
2.00
2.50
3.00
3.50
4.00
4.25

159 A8

3955
4390
4825
5250
5690
6125

3560
3950
4340
4725
5120
5515

3165
3510
3860
4200
4555
4900

2825
3135
3445
3750
4065
4375

2545
2820
3100
3375
3660
3940

1.50
1.80
2.10
2.40
2.70
3.00

163 A8

4780
5125
5455
5775
6235
6530
6825

4305
4610
4910
5200
5615
5880
6145

3825
4100
4360
4620
4990
5225
5460

3415
3660
3895
4125
4455
4665
4875

3075
3295
3505
3715
4010
4200
4390

1.50
1.70
1.90
2.10
2.40
2.60
2.80

3622

16 PR
* Reinforced version also available (REINFORCED)

10

3446
16 PR

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

2850
3310
3765
4215
4660
5125
5425

3075

12 PR

500/6022.5

Service
description
LI/SS

73

implement diagonal tyres | TR

TR series implement traction tyres

for wide agricultural application

74

Great
traction

TR-01

Tread pattern with excellent

traction, suitable for all
self-propelled machines,
agricultural loaders, small
dump trucks and telescopic
loaders.

Universal
application

TR-03

Universal traction pattern

for different agricultural
applications.

Suitable for
meadowland

TR-05

Time proven pattern for

agricultural application with
very good traction.

TR-06

Low-profile traction pattern

for use in meadowlands,
suitable for drive wheels.

Agricultural +
industrial use

Low ground
pressure

TR-04

All-round tread pattern with

great traction for a wide range
of agricultural uses.

Suitable for
meadowland

TR-07

Low-profile tread pattern with

great traction, recommended
for meadowland use.

TR-08

Flotation pattern with reduced

soil compaction due to low
inflation pressure. Great
traction, breaking performance
and lateral stability.

Great
traction

TR-11

Tread pattern with robust lugs,

ensuring very good traction.
Suitable for loaders and side
dumpers.

TR-09

Traction pattern suitable

for front wheels of back-hoe
loaders and wheel loaders.

Agricultural +
industrial use

TR-12

Pattern with excellent traction,

developed for powered wheels
of agricultural and industrial
machinery. Applicable for
trailed wheels as well.

TR-10

Tread pattern suitable above

all for bigger skid-steer loaders
or self-propelled platforms.
Recommended also for front
wheels of back-hoe loaders.

75

implement diagonal tyres | TR

TR-01

TR-03

tr-04

TR-05

TR-07

TR-06

TR-08

TR-09

TR-10

TR-11

TR-12

TR technical data and load capacities

Tyre size

3115.5015

Tread
pattern

TR-06

Type

TL

Rim
(permitted)

Tube
Flap

13LB15

Section
width
(mm)

370

Overall
diameter
(mm)

760

Loaded
static
radius
(mm)

350

Rolling
circumference
(mm)

Ply
rating
PR

2 235

76

8 PR

3115.5015

TR-07

TL

13LB15

370

760

350

TR-03

TL

9.0015.3

1015 HS
10/7515

264

780

360

10.0/7515.3

10.0/7515.3

10.0/7515.3

10.0/7515.3

10.0/7515.3

11.5/8015.3

TR-03

TR-03

TR-04

TR-04

TR-04

TR-04

TR-03

TL

TL

TT/TL

TT/TL

TT/TL

TT/TL

TL

9.0015.3

9.0015.3

9.0015.3

9.0015.3

9.0015.3

9.0015.3

9.0015.3

1015 HS
10/7515

264

1015 HS
10/7515

264

1015 HS
10/7515

264

1015 HS
10/7515

264

360

780

360

360

360

1015 HS
10/7515

264

780

360

360

867

395

125/114 A8

2 295
14 PR

290

122/111 A8

2 295
12 PR

780

118/106 A8

2 295
10 PR

264

130/118 A8

2 295
8 PR

780

125/114 A8

2 295
14 PR

780

122/111 A8

2 295
12 PR

1015 HS
10/7515

11.5/8015

780

121/109 A8

2 295

10 PR
10.0/7515.3

121/109 A8

2 235
8 PR

10.0/7515.3

Service
description
LI/SS

130/118 A8

2 550
10 PR

130/119 A8

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

Tyre
press
ure
(bar)

10

20

30

40

50

1045 / 730

940 / 655

835 / 580

745 / 520

670 / 470

1.00

1295 / 910

1165 / 820

1035 / 730

925 / 650

835 / 585

1.50
2.00

1555 / 1090

1400 / 985

1245 / 875

1110 / 780

1000 / 700

1805 / 1265

1625 / 1140

1445 / 1015

1290 / 905

1160 / 815

2.50

2030 / 1440

1825 / 1300

1625 / 1155

1450 / 1030

1305 / 925

3.00

1045 / 730

940 / 655

835 / 580

745 / 520

670 / 470

1.00

1295 / 910

1165 / 820

1035 / 730

925 / 650

835 / 585

1.50
2.00

1555 / 1090

1400 / 985

1245 / 875

1110 / 780

1000 / 700

1805 / 1265

1625 / 1140

1445 / 1015

1290 / 905

1160 / 815

2.50

2030 / 1440

1825 / 1300

1625 / 1155

1450 / 1030

1305 / 925

3.00

1665 / 1210

1500 / 1090

1335 / 970

1190 / 865

1070 / 780

2.50

1755 / 1275

1580 / 1145

1405 / 1020

1255 / 910

1130 / 820

2.75

1850 / 1330

1665 / 1195

1480 / 1065

1320 / 950

1190 / 855

3.00

1 910 / 1 380

1 720 / 1 240

1 530 / 1 105

1 365 / 985

1 230 / 885

3.25

1 975 / 1 430

1 775 / 1 285

1 580 / 1 140

1 410 / 1 020

1 270 / 920

3.50

2 100 / 1 525

1 890 / 1 375

1 680 / 1 220

1 500 / 1 090

1 350 / 980

4.00

2170 / 1570

1955 / 1410

1735 / 1255

1550 / 1120

1395 / 1010

4.25

2240 / 1610

2015 / 1450

1790 / 1290

1600 / 1150

1440 / 1035

4.50

2310 / 1650

2080 / 1485

1850 / 1320

1650 / 1180

1485 / 1060

4.75

2430 / 1715

2185 / 1545

1945 / 1370

1735 / 1225

1560 / 1105

5.00

2550 / 1780

2295 / 1600

2040 / 1420

1820 / 1270

1640 / 1145

5.25

2660 / 1850

2395 / 1665

2130 / 1480

1900 / 1320

1710 / 1190

5.50

1665 / 1210

1500 / 1090

1335 / 970

1190 / 865

1070 / 780

2.50

1755 / 1275

1580 / 1145

1405 / 1020

1255 / 910

1130 / 820

2.75

1850 / 1330

1665 / 1195

1480 / 1065

1320 / 950

1190 / 855

3.00

1910 / 1380

1720 / 1240

1530 / 1105

1365 / 985

1230 / 885

3.25

1975 / 1430

1775 / 1285

1580 / 1140

1410 / 1020

1270 / 920

3.50

2100 / 1525

1890 / 1375

1680 / 1220

1500 / 1090

1350 / 980

4.00

2170 / 1570

1955 / 1410

1735 / 1255

1550 / 1120

1395 / 1010

4.25

2240 / 1610

2015 / 1450

1790 / 1290

1600 / 1150

1440 / 1035

4.50

2310 / 1650

2080 / 1485

1850 / 1320

1650 / 1180

1485 / 1060

4.75

2430 / 1715

2185 / 1545

1945 / 1370

1735 / 1225

1560 / 1105

5.00

2550 / 1780

2295 / 1600

2040 / 1420

1820 / 1270

1640 / 1145

5.25

2660 / 1850

2395 / 1665

2130 / 1480

1900 / 1320

1710 / 1190

5.50

1820 / 1510

1640 / 1360

1455 / 1210

1300 / 1080

1170 / 970

2.25

2065 / 1580

1860 / 1425

1650 / 1265

1475 / 1130

1330 / 1015

2.50

2430 / 1735

2185 / 1560

1945 / 1390

1735 / 1240

1560 / 1115

3.00

2660 / 1905

2395 / 1715

2130 / 1525

1900 / 1360

1710 / 1225

3.50

77

implement diagonal tyres | TR

TR-01

TR-03

tr-04

TR-05

TR-07

TR-06

TR-08

TR-09

TR-10

TR-11

TR-12

TR technical data and load capacities

Tyre size

11.5/8015.3

Tread
pattern

TR-03

Type

TT/TL

Rim
(permitted)

9.0015.3

Tube
Flap

11.5/8015

Section
width
(mm)

290

Overall
diameter
(mm)

867

Loaded
static
radius
(mm)

395

Rolling
circumference
(mm)

Ply
rating
PR

Service
description
LI/SS

2 550
14 PR

139/126 A8

78

400/6015.5

400/6015.5

15.0/5517

TR-08

TR-08

TR-01

TL

TL

TL

13.0015.5

405

13.0015.5

405

13.0017
(1317)

391

875

875

872

385

385

410

2 575

2 575

TR-01

TL

13.0017
(1317)

391

872

410

2 565

1417.5

TR-10

TL

10.5017.5

355

910

430

2 858

12.0/7518

12.0/7518

TR-10

TR-03

TR-11

TL

10.5017.5

TL

W 918
(9.1118)

TL

W 918
(9.1118)

355

12.018

12.018

299

299

910

937

937

430

447

447

TR-09

TL

1118
(918)

1218HS
12.518

308

987

465

TR-05

TT

11 (12)

14.5/8018

372

1 045

475

40

50

2120 / 1550

1910 / 1395

3260 / 2310

2935 / 2080

2610 / 1850

2330 / 1650

2095 / 1485

4.50

3400 / 2380

3060 / 2140

2720 / 1905

2430 / 1700

2185 / 1530

4.75

4.00

2015 / 1420

1815 / 1280

1615 / 1135

1440 / 1015

1295 / 915

1.25

2185 / 1525

1965 / 1375

1745 / 1220

1560 / 1090

1405 / 980

1.50

2520 / 1750

2270 / 1575

2015 / 1400

1800 / 1250

1620 / 1125

2.00

2800 / 1975

2520 / 1775

2240 / 1580

2000 / 1410

1800 / 1270

2.50

3150 / 2205

2835 / 1985

2520 / 1765

2250 / 1575

2025 / 1420

3.00

2800 / 1960

2500 / 1750

2250 / 1575

3.50

(1)

145/132 A8

4060 / 2800

3650 / 2520

3250 / 2240

2900 / 2000

2610 / 1800

3.60

2325 / 1615

2090 / 1455

1860 / 1295

1660 / 1155

1495 / 1040

2.00

2465 / 1710

2220 / 1535

1970 / 1365

1760 / 1220

1585 / 1100

2.20

2595 / 1815

2335 / 1630

2080 / 1450

1855 / 1295

1670 / 1165

2.40

2730 / 1905

2455 / 1715

2185 / 1525

1950 / 1360

1755 / 1225

2.60

2830 / 1990

2545 / 1790

2260 / 1590

2020 / 1420

1820 / 1280

2.80

2970 / 2100

2670 / 1890

2375 / 1680

2120 / 1500

1910 / 1350

3.10

3890 / 2760

3505 / 2480

3115 / 2205

2780 / 1970

2500 / 1775

3.20

4060 / 2890

3655 / 2600

3250 / 2315

2900 / 2065

2610 / 1860

3.50

4240 / 3030

3820 / 2730

3395 / 2425

3030 / 2165

2725 / 1950

3.80

4410 / 3165

3970 / 2850

3530 / 2530

3150 / 2260

2835 / 2035

4.10

4640 / 3345

4175 / 3010

3715 / 2675

3315 / 2390

2985 / 2150

4.50

4930 / 3565

4435 / 3205

3940 / 2850

3520 / 2545

3170 / 2290

5.00

5210 / 3780

4685 / 3400

4166 / 3025

3720 / 2700

3350 / 2430

5.50

3150 / 2225

2835 / 2005

2520 / 1780

2250 / 1590

2025 / 1430

3.50

3400 / 2380

3060 / 2140

2720 / 1905

2430 / 1700

2185 / 1530

4.00

2490 / 1800

2245 / 1620

1995 / 1440

1780 / 1285

1600 / 1155

2.75

2610 / 1870

2350 / 1680

2090 / 1500

1865 / 1335

1680 / 1200

3.00

2835 / 2025

2550 / 1820

2270 / 1620

2025 / 1445

1825 / 1300

3.50

3050 / 2170

2745 / 1955

2440 / 1735

2180 / 1550

1960 / 1395

4.00

2675 / 1890

2405 / 1700

2140 / 1510

1910 / 1350

1720 / 1215

2.50

2865 / 2015

2575 / 1815

2290 / 1615

2045 / 1440

1840 / 1295

2.80

3050 / 2170

2745 / 1955

2440 / 1735

2180 / 1550

1960 / 1395

3.10

3200 / 2235

2880 / 2010

2560 / 1790

2285 / 1595

2055 / 1435

3.40

3305 / 2310

2975 / 2080

2650 / 1850

2360 / 1650

2125 / 1485

3.70

3765 / 2660

3390 / 2395

3015 / 2130

2690 / 1900

2420 / 1710

2.50

4445 / 3155

4000 / 2840

3555 / 2525

3175 / 2255

2860 / 2030

3.25

4895 / 3485

4405 / 3135

3915 / 2790

3495 / 2490

3145 / 2240

3.75

5425 / 3815

4885 / 3435

4340 / 3050

3875 / 2725

3490 / 2455

4.25

10 PR

131/119 A8

12 PR

134/122 A8

143/131 B

14 PR

150/139 B

12 PR

139/126 A8

2 755
135/123 A8

2 900
12 PR

14.5/8018

30
2375 / 1735

3150 / 2205

12 PR

12.5/8018

20
2670 / 1955

3500 / 2450

2 858

2 755

10
2970 / 2170

140/127 A8

10 PR

1417.5

Tyre
press
ure
(bar)

14 PR

2 565

15.0/5517

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

138/125 A8

3 075
12 PR

155/143 A8

79

implement diagonal tyres | TR

TR-01

TR-03

tr-04

TR-05

TR-07

TR-06

TR-08

TR-09

TR-10

TR-11

TR-12

TR technical data and load capacities

Tyre size

400/7020

Tread
pattern

TR-01

Type

TL

Rim
(permitted)

13 SDC20

Tube
Flap

Section
width
(mm)

404

Overall
diameter
(mm)

1 090

Loaded
static
radius
(mm)

490

Rolling
circumference
(mm)

Ply
rating
PR

Service
description
LI/SS

10

3 210

80

16.0/7020

TR-09

TL

13 SDC20

408

1 095

504

3 220

16.0/7020

TR-09

TL

13 SDC20

408

1 095

504

3 220

500/6022.5

500/6022.5

500/6022.5

TR-08

TR-08

TR-12

TL

TL

TL

16.0022.5

16.0022.5

16.0022.5

503

503

503

1 192

1 192

1 192

519

519

519

14 PR

150 B

10 PR

143/131 A8

14 PR

150/138 A8

3 504

3 504

12 PR

154/142 A8

16 PR

159/147 A8

3 504
170/158 A8

550/6022.5

TR-08

TL

16.0022.5

537

1 254

542

3 687

16 PR
550/6022.5

TR-08

TL

16.0022.5

537

1 254

542

163/151 A8

3 687
171/159 A8

600/4022.5

TR-12

TL

20.00TH222.5
(20.00DC)

600

1 050

473

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

3 146

16 PR

160/148 A8

20

30

40

50

Tyre
press
ure
(bar)

/ 3040

/ 3735

/ 2420

/ 2175

/ 1975

2.00

/ 3580

/ 3225

/ 2850

/ 2560

/ 2325

2.50

/ 4120

/ 3710

/ 3280

/ 2945

/ 2675

3.00

/ 4660

/ 4195

/ 3710

/ 3330

/ 3025

3.50

/ 5160

/ 4645

/ 4100

/ 3685

/ 3350

4.00

3430 / 2460

3090 / 2210

2745 / 1965

2450 / 1755

2205 / 1580

2.00

3815 / 2730

3435 / 2455

3050 / 2185

2725 / 1950

2450 / 1755

2.50

4100 / 3005

3690 / 2700

3280 / 2400

2930 / 2145

2640 / 1930

3.00

4690 / 3305

4220 / 2975

3750 / 2645

3350 / 2360

3015 / 2125

3.50

3955 / 2700

3560 / 2430

3165 / 2160

2825 / 1930

2545 / 1735

1.50

4390 / 3050

3950 / 2745

3510 / 2440

3135 / 2180

2820 / 1960

1.80

4825 / 3390

4340 / 3050

3860 / 2710

3445 / 2420

3100 / 2180

2.10

5250 / 3710

4725 / 3340

4200 / 2970

3750 / 2650

3375 / 2385

2.40

5690 / 4010

5120 / 3610

4555 / 3210

4065 / 2865

3660 / 2580

2.70

6125 / 4305

5515 / 3875

4900 / 3445

4375 / 3075

3940 / 2770

3.00

6105 / 4335

5495 / 3900

4885 / 3465

4360 / 3095

3925 / 2785

3.00

6425 / 4555

5785 / 4100

5140 / 3645

4590 / 3255

4130 / 2930

3.50

7140 / 5060

6425 / 4555

5710 / 4050

5100 / 3615

4590 / 3250

4.00

8400 / 5950

7560 / 5355

6720 / 4760

6000 / 4250

5400 / 3825

4.50

4780 / 3290

4305 / 2960

3825 / 6230

3415 / 2350

3075 / 2115

1.50

5125 / 3555

4610 / 3200

4100 / 2845

3660 / 2540

3295 / 2285

1.70

5455 / 3815

4910 / 3435

4360 / 3050

3895 / 2725

3505 / 2455

1.90

5775 / 4060

5200 / 3655

4620 / 3250

4125 / 2900

3715 / 2610

2.10

6235 / 4405

5615 / 3965

4990 / 3520

4455 / 3145

4010 / 2830

2.40

6530 / 4620

5880 / 4160

5225 / 3695

4665 / 3300

4200 / 2970

2.60

6825 / 4830

6145 / 4345

5460 / 3865

4875 / 3450

4390 / 3105

2.80

7060 / 4940

6495 / 4540

5930 / 4150

5650 / 3950

4800 / 3360

3.00

7360 / 5220

6775 / 4800

6185 / 4385

5890 / 4175

5005 / 3550

3.20

7700 / 5470

7070 / 5030

6500 / 4640

6150 / 4375

5225 / 3720

3.40

3835 / 2715

3450 / 2445

3070 / 2175

2740 / 1940

2465 / 1745

1.20

4310 / 3050

3880 / 2745

3450 / 2440

3080 / 2180

2770 / 1960

1.50

4800 / 3390

4325 / 3050

3840 / 2710

3430 / 2420

3085 / 2180

1.80

5250 / 3710

4725 / 3340

4200 / 2970

3750 / 2650

3375 / 2385

2.10

5405 / 3815

4865 / 3435

4325 / 3050

3860 / 2725

3475 / 2455

2.20

5910 / 4130

5315 / 3715

4725 / 3305

4220 / 2950

3800 / 2655

2.50

6300 / 4410

5670 / 3970

5040 / 3530

4500 / 3150

4050 / 2835

2.80

81

implement diagonal tyres | TR

TR-01

TR-03

tr-04

TR-05

TR-06

TR-07

TR-08

TR-09

TR-10

TR-11

TR-12

TR technical data and load capacities

Tyre size

82

Tread
pattern

Type

Rim
(permitted)

Tube
Flap

Section
width
(mm)

Overall
diameter
(mm)

Loaded
static
radius
(mm)

Rolling
circumference
(mm)

600/5022.5

TR-08

TL

20.0022.5

595

1 140

510

3 380

600/5022.5

TR-08 HD

TL

20.0022.5

611

1 172

510

3 440

Ply
rating
PR

TR-01

TL

W 1224
(W 1324)
(W 14L24)

394

1 269

585

15.5/8024

TR-01

TL

15.5/8024

TR-01

TL

W 1224
(W 1324,
W 14L24)

394

1 269

585

3 730

15.5/8024

TR-01

TL

W 1224
(W 1324)
(W 14L24)

394

1 269

585

3 730

17.5L24

TR-01

TL

W 15L24

394

1 269

585

3 730

445

1 241

580

20

30

40

50

165/153 A8

3995 / 2720
4345 / 2975
4855 / 3320
5185 / 3545
5515 / 3780
6005 / 4185
6490 / 4600

3550 / 2420
3865 / 2645
4320 / 2950
4610 / 3155
4900 / 3360
5335 / 3720
5770 / 4090

3170 / 2160
3450 / 2360
3855 / 2635
4115 / 2815
4375 / 3000
4765 / 3320
5150 / 3650

2855 / 1945
3105 / 2125
3470 / 2370
3705 / 2535
3940 / 2700
4290 / 2990
4635 / 3285

1.10
1.30
1.60
1.80
2.00
2.30
2.60

168/156 A8

7840 / 5600

7055 / 5040

6270 / 4480

12 PR (2)

154/142 A8

3830 / 2720
4040 / 2865
4220 / 2975
4465 / 3150
4725 / 3340

3375 / 2400
3563 / 2525
3750 / 2650
3938 / 2775
4125 / 2900

5600 / 4000
3040 / 2160
3205 / 2275
3350 / 2360
3545 / 2500
3750 / 2650

5040 / 3600

4255 / 3025
4485 / 3185
4690 / 3305
4965 / 3500
5250 / 3710

2735 / 1945
2885 / 2050
3015 / 2125
3190 / 2250
3375 / 2385

3.20
2.00
2.25
2.50
2.75
3.00

14 PR (1)

156/144 A8

5430 / 3815
5600 / 3920

4890 / 3435
5040 / 3530

4313 / 3025
4500 / 3150

3880 / 2725
4000 / 2800

3490 / 2455
3600 / 2520

3.25
3.50

16 PR

159/147 A8

5865 / 4115
6125 / 4305

5275 / 3700
5515 / 3875

4690 / 3290
4900 / 3445

4188 / 2938
4375 / 3075

3770 / 2645
3940 / 2770

3.75
4.10

163/151 A8

6360 / 4480
6590 / 4655
6825 / 4830

5725 / 4030
5935 / 4190
6145 / 4345

5085 / 3585
5275 / 3725
5460 / 3865

4542 / 3200
4708 / 3325
4875 / 3450

4090 / 2880
4240 / 2995
4390 / 3105

4.25
4.50
4.75

3 650
10 PR

Reinforced version (REINFORCED)

(2)
Reinforced version also available (REINFORCED)
(1)

For a non-standard version, please contact a producer.

These tyres are for normal agricultural use and not for continuous highway service.
TL = Tubeless
TT = Tube Type

Tyre
press
ure
(bar)

10

3 730

W 1224
(W 1324,
W 14L24)

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

4440 / 3025
4830 / 3305
5395 / 3690
5760 / 3940
6125 / 4200
6670 / 4650
7210 / 5110

16 PR

15.5/8024

Service
description
LI/SS

/144 A8

/ 2500
/ 2800
/ 3100
/ 3400
/ 3705
/ 3920

/ 2250
/ 2520
/ 2790
/ 3060
/ 3335
/ 3530

/ 2000
/ 2240
/ 2480
/ 2720
/ 2960
/ 3135

/ 1785
/ 2000
/ 2215
/ 2430
/ 2645
/ 2800

/ 1605
/ 1800
/ 1995
/ 2185
/ 2380
/ 2520

1.10
1.30
1.50
1.70
2.00
2.20

83

other tyres | TS

TS series tractor small tyres

for all kinds of gardening equipment

Universal
application

84

TS-01

Classic tread pattern with

excellent traction.

TS-02

Universal traction pattern

for a wide range of gardening
applications.

Great
traction

TS-03

Tread pattern with deep

and robust lugs for greater
traction.

Agricultural +
industrial use

TS-04

All-round tread pattern with

excellent traction.

85

TS-05

TS-06

Improved tread pattern with

great traction.

Pattern with very good

traction and handling. Also
suitable for light industrial use.

Tread patterns and sizes overview

Tyre size
4.008
Universal
application

TS-01 TS-02 TS-03 TS-04 TS-05 TS-06 TS-07

4.010

5.010
5.0012

6.5/8012
6.5/7514

TS-07

Pattern specially developed

for seed drill machines for soil
compaction. Applicable for
drive wheels as well.

6.5/8015

5.0015

69018015

10.0/7515.3

11.5/8015.3

6.0016

7.5016

7.5020

8.320

other tyres | TS

TS-01

TS-02

TS-03

TS-04

TS-05

TS-07

TS-06

TS technical data and load capacities

Tyre size

4.008

Tread
pattern

TS-01

Type

TT

Rim
(permitted)

3.00D8

Tube
Flap

4.008

Section
width
(mm)

114

Overall
diameter
(mm)

425

Loaded
static
radius
(mm)

195

Rolling
circumference
(mm)

Ply
rating
PR

Service
description
LI/SS

1250
2 PR

43/31 A6

86

4.010

TS-03

TT

3.50B10
(3.00B10)

4.010

114

463

214

1370

5.010

TS-03

TT

4J10
(3.50B10)

5.010

140

512

234

1520

5.010

TS-03

TT

4J10
(3.50B10)

5.010

140

512

234

1520

5.0012

TS-02

TT

4.00E12
(3.00D12)

5.0012

145

580

260

1705

5.0012

TS-02

TT

4.00E12
(3.00D12)

5.0012

145

580

260

1705

4.00E12
(3.00D12)

5.0012

5.0012

TS-02

TT

4 PR

49/37 A8

2 PR

57/44 A8

4 PR

70/58 A8

2 PR

61/48 A6

4 PR

145

580

260

1705
6 PR

6.5/8012

TS-06

TT

5J12
(5JA12)

6.5/8012

165

604

278

6.5/7514

TS-06

TS-02

TT

TT

5J12
(5JA12)

6.5/8012

5J14

155/16514

165

604

278

610

283

5.0015

TS-06

TT

5.0015

129

661

307

89/76 A8

1830
4 PR

3.00D15
(4J15)

79/68 A8

1810
6 PR

150

78/66 A8

1810

4 PR
6.5/8012

74/62 A6

72/60 A6

1985
4 PR

75/63 A8

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

Tyre
press
ure
(bar)

10

20

25

30

40

130 / 90

115 / 80

105 / 75

100 / 70

90 / 65

0.80

175 / 125

155 / 110

145 / 100

135 / 95

120 / 90

1.00

200 / 140

175 / 125

165 / 115

155 / 109

140 / 100

1.50

205 / 150

185 / 135

175 / 125

160 / 115

145 / 105

0.80

215 / 155

195 / 135

185 / 130

170 / 120

155 / 109

1.00

225 / 165

200 / 145

190 / 135

180 / 125

160 / 115

1.25

230 / 165

210 / 155

195 / 140

185 / 130

165 / 120

1.50

260 / 180

235 / 160

220 / 150

200 / 145

185 / 128

1.90

285 / 205

260 / 185

245 / 175

230 / 160

205 / 145

0.80

320 / 225

290 / 200

275 / 195

255 / 180

230 / 160

1.00

355 / 255

320 / 230

305 / 225

285 / 205

255 / 185

1.25

400 / 280

360 / 255

340 / 240

315 / 225

285 / 200

1.50

470 / 330

420 / 295

400 / 280

375 / 265

335 / 236

2.00

290 / 200

255 / 180

240 / 165

225 / 155

205 / 140

1.00

330 / 230

295 / 205

275 / 195

257 / 180

230 / 165

1.25

370 / 260

325 / 230

305 / 215

285 / 200

255 / 180

1.50

405 / 295

360 / 260

335 / 245

315 / 225

285 / 205

1.75

445 / 320

395 / 280

370 / 260

345 / 245

310 / 225

2.00

485 / 340

430 / 300

400 / 285

375 / 265

340 / 240

2.25

495 / 350

440 / 310

410 / 290

385 / 270

345 / 245

2.50

520 / 370

460 / 325

435 / 305

405 / 285

365 / 260

3.00

550 / 390

485 / 345

455 / 325

425 / 300

385 / 270

3.50

365 / 265

330 / 235

310 / 225

290 / 210

260 / 188

0.80

400 / 285

360 / 255

340 / 240

315 / 225

285 / 202

1.00

430 / 305

385 / 275

365 / 260

345 / 245

307 / 218

1.20

475 / 345

430 / 310

405 / 290

375 / 275

340 / 245

1.50

555 / 405

500 / 365

470 / 345

440 / 325

395 / 288

2.00

610 / 440

550 / 395

520 / 375

500 / 355

437 / 315

2.40

695 / 475

625 / 425

590 / 400

550 / 380

495 / 338

2.75

730 / 505

655 / 455

620 / 430

580 / 405

520 / 362

3.00

810 / 560

730 / 505

690 / 475

650 / 450

580 / 400

3.50

335 / 235

295 / 215

280 / 195

260 / 185

235 / 170

1.00

425 / 300

375 / 265

355 / 250

330 / 230

295 / 210

1.50

460 / 325

405 / 285

380 / 270

355 / 250

320 / 225

1.70

396 / 270

357 / 243

337 / 230

315 / 218

283 / 193

1.25

434 / 300

391 / 270

369 / 255

344 / 241

310 / 214

1.50

507 / 357

456 / 321

431 / 303

402 / 288

362 / 255

2.00

542 / 381

488 / 343

461 / 324

425 / 307

387 / 272

2.20

87

other tyres | TS

TS-01

TS-02

TS-03

TS-04

TS-05

TS-07

TS-06

TS technical data and load capacities

Tyre size

5.0015

Tread
pattern

TS-06

Type

TT

Rim
(permitted)

3.00D15
(4J15)

Tube
Flap

5.0015

Section
width
(mm)

129

Overall
diameter
(mm)

661

Loaded
static
radius
(mm)

307

Rolling
circumference
(mm)

Ply
rating
PR

Service
description
LI/SS

1985
6 PR

84/71 A8

88

6.5/8015

TS-06

TT

5J15
(41/2K15)

6.5/8015

163

685

318

2040

4 PR

6.5/8015

TS-06

TT

5J15
(41/2K15)

6.5/8015

163

685

318

2040
6 PR

6.5/8015

TS-06

TT

5J15
(41/2K15)

69018015

TS-07

TT

5J15

10.0/7515.3

TS-05

TL

9.0015.3

10.0/7515.3

TS-05

TL

9.0015.3

11.5/8015.3

TS-05

TL

9.0015.3

6.5/8015

163

685

318

176

690

309

2056

1015 HS
10/7515

264

780

360

2295

1015 HS
10/7515

264

780

360

2295

11.5/8015

290

100/88 A8

8 PR

118/106 A8

TS-05

TL

9.0015.3

11.5/8015

290

867

410

6.0016

TS-04

TT

6.0016

169

735

345

TS-04

TT

4.50E16
(4.00E16)

6.0016

169

735

345

139/126 A8

2160
6 PR

6.0016

130/119 A8

2550
14 PR

4.50E16
(4.00E16)

122/111 A8

2550
10 PR

11.5/8015.3

100/88 A8

4 PR

10 PR

410

94/82 A8

2040
8 PR

867

86/75 A8

91/79 A8

2160
8 PR

100/88 A8

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

Tyre
press
ure
(bar)

10

20

25

30

40

578 / 405

520 / 364

491 / 344

456 / 325

413 / 289

638 / 444

575 / 399

543 / 377

508 / 356

456 / 317

3.00

700 / 483

630 / 435

595 / 411

560 / 387

500 / 345

3.50

435 / 310

390 / 280

370 / 265

345 / 250

310 / 222

0.80

475 / 335

430 / 300

405 / 285

375 / 270

340 / 239

1.00

495 / 350

445 / 315

420 / 300

400 / 280

355 / 250

1.20

600 / 435

540 / 395

510 / 370

475 / 350

430 / 312

1.50

650 / 475

585 / 425

555 / 400

515 / 380

465 / 338

1.80

705 / 515

635 / 460

600 / 435

560 / 410

505 / 367

2.10

740 / 540

670 / 485

630 / 460

600 / 430

530 / 385

2.40

790 / 560

710 / 505

670 / 475

630 / 450

565 / 401

2.70

840 / 595

755 / 535

715 / 505

670 / 475

600 / 425

3.00

890 / 630

800 / 565

755 / 535

710 / 505

635 / 450

3.30

940 / 665

845 / 600

795 / 565

750 / 530

670 / 475

3.60

2.50

1010 / 710

910 / 640

860 / 600

810 / 565

720 / 505

4.00

1065 / 740

960 / 670

905 / 630

850 / 595

760 / 530

4.40
4.80

1120 / 785

1010 / 705

950 / 670

895 / 630

800 / 560

1030 / 720

925 / 650

875 / 615

825 / 575

735 / 515

2.00

1120 / 785

1010 / 705

950 / 665

890 / 625

800 / 560

2.50

1665 / 1210

1500 / 1090

1415 / 1030

1335 / 970

1190 / 865

2.50

1850 / 1330

1665 / 1195

1570 / 1130

1480 / 1065

1320 / 950

3.00
3.25

1910 / 1380

1720 / 1240

1625 / 1170

1530 / 1105

1365 / 985

1975 / 1430

1775 / 1285

1680 / 1215

1580 / 1140

1410 / 1020

3.50

2100 / 1525

1890 / 1375

1785 / 1295

1680 / 1220

1500 / 1090

4.00

1820 / 1510

1640 / 1360

1545 / 1285

1455 / 1210

1300 / 1080

2.25

2065 / 1580

1860 / 1425

1755 / 1345

1650 / 1265

1475 / 1130

2.50

2430 / 1735

2185 / 1560

2065 / 1475

1945 / 1390

1735 / 1240

3.00

2660 / 1905

2395 / 1715

2260 / 1620

2130 / 1525

1900 / 1360

3.50

2970 / 2170

2670 / 1955

2525 / 1845

2375 / 1735

2120 / 1550

4.00

3260 / 2310

2935 / 2080

2775 / 1965

2610 / 1850

2330 / 1650

4.50

3400 / 2380

3060 / 2140

2890 / 2035

2720 / 1905

2430 / 1700

4.75

625 / 440

560 / 395

530 / 375

500 / 350

445 / 315

1.50

730 / 520

655 / 465

620 / 440

580 / 410

520 / 370

2.00

820 / 580

735 / 525

695 / 495

655 / 460

585 / 415

2.50

860 / 610

775 / 550

730 / 520

690 / 490

615 / 437

2.75
3.00

930 / 650

840 / 585

790 / 555

745 / 515

665 / 465

1030 / 720

925 / 650

875 / 615

825 / 570

735 / 515

3.50

1120 / 785

1010 / 705

950 / 665

895 / 615

800 / 560

4.00

89

other tyres | TS

TS-01

TS-02

TS-03

TS-04

TS-05

TS-07

TS-06

TS technical data and load capacities

Tread
pattern

Tyre size

6.0016

TD-13

Type

TT

Rim
(permitted)

4.50E16
(4.00E16)

Section
width
(mm)

Tube
Flap

6.0016

Overall
diameter
(mm)

169

735

Loaded
static
radius
(mm)

345

Rolling
circumference
(mm)

Ply
rating
PR

6 PR
7.5016

TS-04

7.5016

TS-04

7.5016

TD-13

7.5020

TS-04

7.5020

TD-13

8.320

TD-13

TT/TL

TT/TL

TT

TT

TT

TT

7.5016

5.50F16
(5.00F, 6.00F)

7.5016

5.50F16
(5.00F, 6.00F)

7.5016

5.50F20
(6.00F20)

7.5020

5.50F20
(6.00F20)

7.5020

W 720
(W 620)

8.320

205

803

375

205

803

375

803

375

904

420

904

420

895

416

100/88 A8

905 / 630
1065 / 740
1120 / 785

815 / 565
960 / 665
1010 / 705

770 / 535
905 / 630
950 / 665

720 / 500
850 / 585
895 / 630

645 / 450
760 / 525
800 / 560

1.50
2.00
2.25

108/95 A8

1220 / 840
1360 / 935
1400 / 965

1095 / 755
1220 / 840
1260 / 870

1035 / 715
1155 / 795
1190 / 820

975 / 665
1085 / 740
1120 / 775

870 / 600
970 / 665
1000 / 690

2.50
3.00
3.25

100/88 A8

905 / 630
1065 / 740
1120 / 785

815 / 565
960 / 665
1010 / 705

770 / 535
905 / 630
950 / 665

720 / 500
850 / 585
895 / 630

645 / 450
760 / 525
800 / 560

1.50
2.00
2.25

103/91 A8

985 / 690
1155 / 810
1225 / 680

890 / 620
1040 / 730
1105 / 775

840 / 585
980 / 690
1040 / 730

790 / 545
925 / 640
980 / 690

705 / 490
825 / 575
875 / 615

1.50
2.00
2.25

103/91 A8

985 / 690
1155 / 810
1225 / 680

890 / 620
1040 / 730
1105 / 775

840 / 585
980 / 690
1040 / 730

790 / 545
925 / 640
980 / 690

705 / 490
825 / 575
875 / 615

1.50
2.00
2.25

104/92 A8

915 / 530
1045 / 660
1175 / 785
1305 / 915

810 / 465
925 / 580
1035 / 695
1150 / 810

760 / 440
865 / 545
975 / 655
1080 / 760

710 / 410
810 / 510
910 / 610
1010 / 710

630 / 370
720 / 460
810 / 550
900 / 630

0.80
1.20
1.60
2.00

TL = Tubeless
TT = Tube Type

Variation in load capacity with speed dependence free rolling wheels

Implement, Implement Traction, Tractor Small
Speed cat.

91/79 A8

1.50
2.00
2.50
2.75

2640
6 PR

For non-standard version, please contact a producer.

These tyres are for normal agricultural use and not for continuous highway service.

40
445 / 315
520 / 370
585 / 415
615 / 437

2660
6 PR

211

30
500 / 350
580 / 410
655 / 460
690 / 490

2660
6 PR

205

25
530 / 375
620 / 440
695 / 495
730 / 520

2360
6 PR

205

20
560 / 395
655 / 465
735 / 525
775 / 550

2360
8 PR

205

10

2360
6 PR

Tyre
press
ure
(bar)

Tyre load capacity (kg) free rolling / drive wheel at speed (km/h)

625 / 440
730 / 520
820 / 580
860 / 610

2160

90

5.50F16
(5.00F, 6.00F)

Service
description
LI/SS

Variation in load capacity with speed dependence drive wheels

Implement, Implement Traction, Tractor Small

10

15

20

25

30

35

40

45

50

Speed cat.

10

15

20

25

30

35

40

45

50

A6
(30 km/h)

LLV
HLV

+65%
+98%

+29%
+55%

+21%
+45%

+14%
+37%

+7%
+28%

(0)
+20%

5%
+14%

10%
+8%

A6
(30 km/h)

LLV
HLV

+135%
+193%

+29%
+84%

+21%
+73%

+14%
+63%

+7%
+53%

(0)
+43%

5%
+36%

10%
+29%

A8
(40 km/h)

LLV
HLV

+65%
+98%

+40%
+68%

+33%
+60%

+26%
+51%

+19%
+43%

+12%
+34%

+5%
+26%

(0)
+20%

5%
+14%

10%
+8%

A8
(40 km/h)

LLV
HLV

+135%
+193%

+40%
+100%

+33%
+90%

+26%
+80%

+19%
+70%

+12%
+60%

+5%
+50%

(0)
+43%

5%
+36%

10%
+29%

LLV = Low Load Variation

HLV = High Load Variation is where the tyre load varies by a factor of 2 or more between loaded and unloaded conditions. The inflation pressure must be increased
for HLV application, consult the tyre manufacturer for details. In the case of HLV, the maximum distance should not exceed 1 km. For a longer distance, consult the
tyre manufacturer.

91

other tyres | TF

Tractor front tyres with balanced properties

for perfect handling on and off the road

Tread patterns and sizes overview

Tyre size

TF-01

TF-03

6.0016

6.5016
7.5016
92

Universal
application

9.0016

10.0016

TF-04

TF-05

93

Multi-rib tread profile without

any lateral tread elements
and side lugs.

Multi-rib tread pattern with

very strong shoulder lugs
and lateral tread elements.

Longer
service life

TF-05

Designed for non-driven

tractor wheels. Improved
on-road performance
and straight-line steering
characteristics.

TF-06

Pattern with very long service

life and excellent steering
characteristics, mainly on soft
terrain.

TF-04

Pattern with high stability

in track due to deep relief
of design.

Agricultural +
industrial use

IM-05

Special tread pattern

developed for steering wheels
of industrial tractors.

6.0018

6.5020

7.5020

TF-03

IM-05

11L16

TF-01

TF-06

other tyres | TF

TF-01

TF-03

TF-04

TF-05

TF-06

IM-05

TF technical data and load capacities

Tyre size

6.0016

Tread
pattern

TF-01

Type

TT

94

Rim
(permitted)

4.50E16
(4.00E, 5K, 5.00F)

Tube

6.0016

Section Overall
width diameter
(mm)
(mm)

165

735

Loaded
static
radius
(mm)

340

Rolling
circumference
(mm)

Ply
rating
PR

10*

20

30

40

88 A6 (80 A8)

445
535
630
720
805
840

400
480
565
650
720
755

295
355
420
480
535
560

235
285
335
385
430
450

1.00
1.50
2.00
2.50
3.00
3.30

88 A6 (80 A8)

445
535
630
720
805
840

400
480
565
650
720
755

295
355
420
480
535
560

235
285
335
385
430
450

1.00
1.50
2.00
2.50
3.00
3.30

88 A6 (80 A8)

445
535
630
720
805
840

400
480
565
650
720
755

295
355
420
480
535
560

235
285
335
385
430
450

1.00
1.50
2.00
2.50
3.00
3.30

6 PR

91 A6 (83 A8)

475
580
685
790
900
925

425
520
615
710
810
830

315
385
455
525
600
615

250
310
365
420
480
485

1.00
1.50
2.00
2.50
3.00
3.20

8 PR

97 A6 (89 A8)

1065
1095

960
985

710
730

560
580

4.00
4.20

91 A6 (83 A8)

475
580
685
790
900
925

425
520
615
710
810
830

315
385
455
525
600
615

250
310
365
420
480
485

1.00
1.50
2.00
2.50
3.00
3.20

98 A6 (90 A8)

780
925
1050
1125

700
830
945
1015

520
615
700
750

415
490
560
600

1.50
2.00
2.50
2.80

98 A6 (90 A8)

780
925
1050
1125

700
830
945
1015

520
615
700
750

415
490
560
600

1.50
2.00
2.50
2.80

2160
6 PR

6.0016

TF-03

TT

4.50E16
(4.00E, 5K, 5.00F)

6.0016

165

735

340

2160
6 PR

6.0016

TF-06

TT

4.50E16
(4.00E, 5K, 5.00F)

6.0016

165

735

340

2160
6 PR

6.5016

6.5016

6.5016

TF-03

TF-03

TF-05

TT

4.50E16
(4.00E, 5K, 5.00F, 5.50F)

TT

4.50E16
(4.00E, 5K, 5.00F, 5.50F)

TT

4.50E16
(4.00E, 5K, 5.00F, 5.50F)

6.5016

6.5016

6.5016

175

175

175

760

760

760

350

350

350

2230

2230

2230
6 PR

7.5016

TF-01

TT

5.50F16
(5.00F, 6.00F)

7.5016

205

805

370

2365
6 PR

7.5016

TF-03

TT

5.50F16
(5.00F, 6.00F)

7.5016

205

805

370

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

2365
6 PR

95

other tyres | TF

TF-01

TF-03

TF-04

TF-05

TF-06

IM-05

TF technical data and load capacities

Tyre size

7.5016

Tread
pattern

TF-03

Type

TT

Rim
(permitted)

5.50F16
(5.00F, 6.00F)

Tube

7.5016

Section Overall
width diameter
(mm)
(mm)

205

805

Loaded
static
radius
(mm)

370

Rolling
circumference
(mm)

Ply
rating
PR

2365
8 PR

96

7.5016

TF-05

TT

5.50F16
(5.00F, 6.00F)

7.5016

205

805

370

2365
6 PR

9.0016

TF-03

TT

W 816
(6.00F, W 7, W 8L)

9.0016

234

855

395

9.0016

TF-03

TT

9.0016

234

855

395

TF-03

TT

W 816 (W 8L16)

9.0016
10.0016

274

895

411

IM-05
(F 3)

TL

W 816

285

805

372

6.0018

TF-03

TT

6.0018

160

790

365

6.0018

TF-04

TT

6.0018

160

790

365

6.5020

TF-03

TT

6.5020
7.0020

175

865

408

96 A6 (88 A8)

2323
6 PR

5.00F20
(4.00E, 5.50F)

119 A6 (115 A8)

2323
6 PR

4.50E18
(4.00E, 5K, 5.00F)

118 A6 (114 A8)

2365
10 PR

4.50E18
(4.00E, 5K, 5.00F)

111 A6 (103 A8)

2630
8 PR

11L16

104 A6 (97 A8)

2514
8 PR

10.0016

98 A6 (90 A8)

2514
6 PR

W 816
(6.00F, W 7, W 8L)

103 A6 (96 A8)

96 A6 (88 A8)

2543
6 PR

97 A6 (89 A8)

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

10*

20

30

40

1160

1045

775

620

3.10

1210

1090

805

645

3.30

1260

1135

840

670

3.50

1315

1180

875

710

3.70

780

700

520

415

1.50
2.00

925

830

615

490

1050

945

700

560

2.50

1125

1015

750

600

2.80

835

750

555

445

1.00

1035

930

690

550

1.50

1245

1120

830

665

2.00

1350

1215

900

730

2.30

1450

1300

965

770

2.50

1510

1355

1005

805

2.70

1570

1410

1045

835

2.90

1635

1470

1090

875

3.10

1075

895

715

645

1.00

1335

1110

890

800

1.50

1585

1320

1055

950

2.00

1835

1530

1220

1100

2.50

1970

1640

1310

1180

2.80

1150

1035

920

820

2.00

1365

1230

1090

975

2.50

1520

1365

1215

1085

3.00

1660

1495

1325

1185

3.50

1700

1530

1360

1215

3.75

705

635

470

375

2.00

855

770

570

455

2.50

1005

905

670

535

3.00

1065

960

710

560

3.20

705

635

470

375

2.00

855

770

570

455

2.50

1005

905

670

535

3.00

1065

960

710

560

3.20

795

715

530

425

2.00

930

835

620

495

2.50

1060

950

705

565

3.00

1095

985

730

580

3.20

97

other tyres | TF

TF-01

TF-03

TF-04

TF-05

TF-06

IM-05

TF technical data and load capacities

Tyre size

6.5020

Tread
pattern

TF-04

Type

TT

Rim
(permitted)

5.00F20
(4.00E, 5.50F)

Tube

6.5020
7.0020

Section Overall
width diameter
(mm)
(mm)

175

865

Loaded
static
radius
(mm)

408

Rolling
circumference
(mm)

Ply
rating
PR

6 PR
6.5020

TF-05

TT

5.00F20
(4.00E, 5.50F)

6.5020
7.0020

175

865

408

7.5020

TF-01

TT

7.5020

205

915

420

TF-03

TT

5.50F20
(5.00F, 6.00F)

7.5020

205

915

420

7.5020

TF-05

TT

7.5020

205

915

420

97 A6 (89 A8)

425
495
565
580

2.00
2.50
3.00
3.20

97 A6 (89 A8)

795
930
1060
1095

715
835
950
985

530
620
705
730

425
495
565
580

2.00
2.50
3.00
3.20

103 A6 (96 A8)

880
1050
1215
1315

790
945
1095
1180

585
700
810
875

470
560
650
700

1.50
2.00
2.50
2.80

103 A6 (96 A8)

880
1050
1215
1315

790
945
1095
1180

585
700
810
875

470
560
650
700

1.50
2.00
2.50
2.80

103 A6 (96 A8)

880
1050
1215
1315

790
945
1095
1180

585
700
810
875

470
560
650
700

1.50
2.00
2.50
2.80

2690
6 PR

* Basic Inflation Pressure must be increased about 25%.

40

530
620
705
730

2690
6 PR

5.50F20
(5.00F, 6.00F)

30

715
835
950
985

2690
6 PR

7.5020

20

795
930
1060
1095

2543
6 PR

5.50F20
(5.00F, 6.00F)

10*

2543

98

Tyre
pressure
(bar)

Tyre load capacity (kg) at speed (km/h)

Service description LI/SS

TL = Tubeless
TT = Tube Type

For non-standard version, please contact a producer.

These tyres are for normal agricultural use and not for continuous highway service.

Variation in load capacity with speed dependence

Tractor Front Steering wheels
Speed category

10*

15

20

25

30

35

40

Speed category A6

+50%

+43%

+35%

+15%

(0)

10%

20%

Speed category A8

+67%

+50%

+39%

+28%

+11%

+4%

(0)

7%

* Basic Inflation Pressure must be increased about 25%.

If a front-end loader is fitted on the tractor, +100% applies.

45

99

other tyres | B

Bantam tyres for light agricultural

equipment and hand trucks

100

101

B1

B2

B5

B6

Bantam tyres technical data and load capacities

Ply
rating
PR

Service
description
LI/SS

Type

28 J

B2

4 PR

71 A2

164

B5

4 PR

164

B 5 SUPER

Tyre
size

Tread
pattern

124

B 1 AERO

164

3.508

B6

2 PR

Tyre
Tyre
Section Overall
load
pressure
width diameter
capacity
(bar)
(mm)
(mm)
(kg)

Rim
(permitted)

Tube
Flap

TT

2.104

124

114

313

100

2.0

TT

2.50A8

164

114

415

345

3.5

71 A2

TT

2.50A8

164

114

415

345

3.5

71 J

TT

(2.508)

164

114

415

345

3.5

42 A4

TT

2.508

3.508

100

393

150

2.0

These tyres are for normal agricultural use and not for continuous highway service.
TT = Tube Type

Tread pattern marking US | use & maintenance

OIL

Tread pattern marking United States

102

Use and Maintenance

Production name

United Stated Marking

Production name

United Stated Marking

RD-01

R-1W

IM-03

I-1

RD-02

R-1W

IM-04

I-1

RD-03

R-1W

IM-06

I-1

RD-05

R-1W

IM-07

I-1

RD-70

R-1W

IM-08

I-1

TF-01

F-2

IM-09

I-2

TF-03

F-2

IM-10

I-1

TF-04

F-2

TR-01

R-1

TF-05

F-2

TR-03

R-4

TF-06

F-2

TR-04

R-4

IM-05

F-3

TR-05

R-4

AR-01

I-2 / HF-2

TR-06

I-3

AR-02

I-2 / HF-2

TR-07

I-3

AGRITERRA 02

I-2 / HF-2

TR-08

I-2 / HF-2

AGRITERRA 03

I-2 / HF-3

TR-09

R-4

TD-01

R-1

TR-10

R-4

TD-02

R-1

TR-11

R-4

TD-03

R-1

TR-12

R-4

TD-05

R-2

TS-01

R-1

TD-13

R-1

TS-02

R-1

TD-17

R-2

TS-03

R-1

TD-19

R-1

TS-04

R-1

AF-01

R-1

TS-05

R-1

IM-01

I-3

TS-06

R-1

IM-02

I-3

TS-07

R-1

>
Proper
use of tyres

>
Storage
> Keep the tyres clean and away from heat, light,
ozone or hydrocarbon sources.
> Avoid prolonged exposure of the tyres to direct
sunlight.
> Avoid any contact with grease, petrol, volatile
solvents or other substances that may
deteriorate the rubber.
> Avoid horizontal storage for tubeless tyres, only
small size tyres may be stacked or stored flat
(maximum 6 months).
> When tyres are stored flat (horizontal), the
position must be lug against lug.

OIL
> When loading tyres you
have to consider the
correlation between speed, inflation pressure
and load capacity.

> Overloading results in premature tyre failure.

Use the technical documentation and inflation
tables which show the load and pressure figures
kg
for different operating speeds.
> Underinflation results not only in incorrect tread
wear but also in ply separation and eventually
further damage to the ply.
> Overinflation makes the tyre stiff and decreases
?
its resistance against hits, leading to ply tear.
kg

> Reduce inflation pressure when tyres are stored

fitted on rims.
> Ensure there is no water or moisture inside
the tyre.
> Never store tyres directly in contact with
the ground for long periods.

?
OIL

> Repairs to tyres

> For safety reasons, repairs should only be carried
out by specialists using the correct tools.
OIL

kg

OIL

Check inflation
pressure
regularly

Avoid contact with

grease, oil and other
chemicals

OIL

Inspect tyres
for damage and
irregularities

Observe tyre
and vehicle
load limits

kg

?
kg

Read safety and

maintenance
recommendations

Use only
authorised
repair

103

fitting instructions | water ballasting

104

Fitting and removal instructions

Water ballasting of tractor tyres

Demounting and mounting procedures can be dangerous, and should be performed only by
trained and qualified staff, using proper tools and procedures. Failure to comply with these
procedures may result in faulty positioning of the tyre on the rim, and cause the tyre to
burst with explosive force leading to serious physical injury or death.

In some cases, it is necessary to add weight to tyres to increase traction power. Filling the
tyre with a liquid (water) is a simple and inexpensive way. It is possible to add liquid to the
tyres up to 75% of their volume. In winter, to avoid the water damaging the tyres when it
freezes, suitable quantities of anti-freeze must be added.

> Fitting

Instructions
for adding liquid
>

1. Make sure that the rim, the tyre and the tube are
compatible.
2. Check that the tyre is suitable for the machine.
Use only rims recommended or permitted by the
tyre manufacturer.
3. Always use the proper specialised equipment
and tools.
4. The rim must be clean and in perfect condition
(no damage, etc.). If necessary, clean the rim
thoroughly with a wire brush. Never fit a tyre
onto a rim that shows cracks, significant
distortion, evidence of welded repair, etc.
5. Thoroughly inspect the inside as well as the
outside of the tyre in order to identify any
damage which may be present. If the damage is
considered to be beyond repair, the tyre should
be scrapped.
6. If fitting with a tube, always use the correct
new tube and flap for the tyre size. For fitting
tubeless tyres without tubes, on tubeless rims,
always use a new tubeless valve.
7. Before fitting, lubricate the rim and the
beads. Use only a suitable lubricant that will
not damage the tyre (never use silicone or
petroleum-based products).
8. We recommend vertical fitting. In case of
horizontal fitting it is impossible to see if the
lower bead is correctly seated.
9. Fit the tyre on the rim diametrically opposite to
the valve hole (respect, if present, the rotation
direction indicated by the arrows). With the
help of a suitable lever and closely repeated
applications, get the first bead over the rim
flange. Then pose the lightly inflated talc coated
tube (if fitted) inside the tyre. Locate the valve,
fitting the ferrule loosely. Fit the second bead,
lever it progressively over the rim flange, finish
at the valve.

10. For seating the beads and centring of the tyre,

remove the valve core. Slowly inflate to ensure
correct seating of the beads. Ensure that the
beads do not pinch the tube.
11. During tyre inflation keep at a safe distance and
always use a safety cage. If possible, fasten the
tyre to the wall or use retaining chains. During
pressure readings ensure that no part of the
body is within the possible trajectory of the valve
mechanism or of the caps. It is recommended
to use suitable pressure limitation gauges. Use
a filter and dehumidifier on the compressed air
line to avoid introducing humidity or dirt. Never
use a hammer to make a tyre bead seat by
hitting it.
12. Continue inflation. Make sure that you do not
inflate beyond 2,5 bar if the beads are not well
seated and centred on the wheel.
13. If the beads are not correctly seated, deflate,
lubricate and inflate again. Repeat these
operations until the beads are correctly seated.
14. When all the previous operations have been
correctly done refit the valve core. Set the
pressure according to the load see tables in
technical databook.
15. Make sure the valves do not touch the rims, the
brake drums or other fixed mechanical parts.

> Removing
> Never try to unseat the beads of an inflated tyre.
> Always remove the valve core.
> Let the tyre deflate, check before unseating that
the tyre is completely deflated. Never use tools
that could damage the rims or the beads
of the tyre.

1. Jack the wheel up and position the valve at the

highest vertical point.
2. Unscrew the removable valve body from the
valve and connect a combined air-water fill and
draining valve to the valve chunk. Air can be
removed from the tyre through this valve while
the water is entering.
3. Introduce the water or anti-freeze mixture into
the tyre. Stop filling when liquid starts to issue
from the valve. The quantity of liquid added will
be about 75%. Do not over-fill!
4. Replace the valve body and inflate the tyre to
the recommended operating pressure.
5. Clean all metal parts anti-freeze solution is
corrosive.

> Instructions for draining liquid

Anti-freeze
solution
>
> As protection against frost, it is recommended
to add Calcium Chloride (CaCl2). If a tubeless tyre
is mounted, we recommend that the rim should
be treated against corrosion or an inner tube
must be used.
> Remember prepare the solution by pouring
the Calcium Chloride into the water, stirring to
help it dissolve. Never pour water on to Calcium
Chloride, it is dangerous.

CaCl2 per litre of water

Protection to

200 g

10 C

250 g

15 C

300 g

20 C

350 g

25 C

400 g

30 C

1. Jack the wheel up and position the valve at the

lowest vertical point.
2. Unscrew the valve core and let the water drain
out.

25 %

3. Attach a small rubber hose of suitable length to

the locking washer and insert the hose into the
tyre tube, then screw the washer down over the
stem of the valve.
4. Inflate the tyre with air.
5. Remove the internal valve stem and let the
remaining water drain from the tyre.
6. Remove the rubber hose and reassemble the
valve. Inflate with air up to the recommended
pressure.

75 %

105

30A

32

665.2

716.0

766.8

817.6

34

36

38

42

868.4

919.2

970.0

1 071.6

Nominal

Pmin

46

48

50

54

1 173.2

1 224.0

1 274.8

1 376.4

DW

G
GD

G
D

Hmin

D
DG

918
9.0012
9.0015.3
1118
1218
1317
13.0017
16.0017

228.5
228.5
228.5
279.5
305.0
330.0
330.0
406.5

25.5
19.0
19.0
25.5
25.5
25.5
19.0
19.0

462.0
305.6
388.8
462.0
462.0
436.6
436.6
436.6

G D
GD

D
11.0

380.2

D G

A
AA

178.0

38.0

401.5A

Rim

7.0401.5

GD
DD GGG

5 divided rims
A

Rim

2.104 *

53.5

12.0

D Specified diameter (mm)

* divided rim
** multi-piece rim

DD GG
DD GG

330.2

5 Tapered rims

D G

12.7 368.3
A
12.7 444.5
12.7 571.5
12.7 393.7
12.7 571.5
12.7 571.5
12.7 A 571.5
12.7 673.1
12.7 673.1
12.7 774.7

171.5
266.5
298.5
330.0
355.6
406.4
508.0
508.0
609.5
A
508.0

D G

13LB15

6.7514.5
10.5017.5
11.7522.5
13.0015.5
A
14.0022.5
16.0022.5
20.0022.5
AG20.0026.5
AG24.0026.5
AG20.0030.5

A
A
A
A

G
GD
D

D
512.8

D G

D
A

D G

G
D
G
D

Rim

GD D G G
Rim

A
A

DG

Hmin

G
D

G
25.5

28

202.4
202.4
202.4
253.2
304.0
380.2

Rim

26

Nominal

24
614.4

14.0
11.5
17.5
18.0
18.0
18.0

A
A 15 Drop-centre rims

1320 SDC 330.0

Pmin

20
512.8

63.5
63.5
76.0
76.0
76.0
76.0

18
462.0

Nominal

16
405.6

2.508
2.50A8
3.00D8
3.00D10
3.00D12
3.00D15

Rim

Nominal
D

G
Hmin

DW

A
A

Rim

D G

A
Pmin

Hmin

Pmin

Hmin

Drop Centre rim

20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
20.5
27.0
27.0
27.0
27.0
27.0

D A

20.0 304.0
A
20.0 405.6
20.0 405.6
22.5 405.6
22.5 A 512.8
16.0 304.0
22.5 405.6
22.5 512.8
22.5 405.6
22.5 512.8
20.5 304.0
A
20.5 380.2
16.0 405.6

DC

A
23.5
23.5
23.5
27.0
27.0
27.0
27.0
27.0
27.0
27.0
33.0
33.0
33.0
50.5
50.5
50.5
50.5
50.5

Hmin

Double Hump

22.5
22.5
22.5
25.5
25.5
25.5
25.5
25.5
22.5
25.5
25.5
25.5
25.5
25.5
25.5
29.0
29.0
29.0

101.5
101.5
114.5
127.0
127.0
127.0
139.5
139.5
152.5
152.5
178.0
178.0
178.0

One-piece rim

152.5
178.0
203.0
228.5
254.0
279.5
305.0
330.0
203.0
355.5
381.0
406.5
457.0
406.5
457.0
508.0
533.5
584.0

D DG G
D G

W6
W7
W8
W9
W 10
W 11
W 12
W 13
W8L
W 14 L
W 15 L
W 16 L
W 18 L
DW 16 L
DW 18 L
DW 20 B
DW 21 B
DW 23 B

Hmin.

D
Rim
253.20
4.00E12
253.20
4.00E16
253.20 A 4.50E16
380.20
5.00F16
380.20 A 5.00F20
304.00
5JA12
354.80
5.50F16
380.20
5.50F20
6.00F16
6.00F20
7.0012
7.0015
7.00I16 **

Multi-piece rim

Pmin.

D G

Semi-drop Centre rim

SDC

Type

DW

Wide Drop Centre Double Well shape rim

DW

Pmin
D

Wide Drop Centre Single Well shape rim

A
Hmin

DW

FURTHER SAMPLES OF MARKING

H2

G
D G

Hmin

G
14.1
14.1
17.3
17.3
18.0
17.3
17.3
17.3

D G

Hmin
G

3.00B10
3.50B10
4J10
4J15
41/2K15
5J12
5J14
5J15

Pmin

A
76.0
89.0
A
101.5
101.5
114.5
127.0
127.0
127.0

Hmin

Rim

Nominal Rim Diameter in inches

Pmin

38

One-piece rim

D G

Flange Height code

Pmin

DG

A
A

Nominal Rim Width in inches

5 Semi drop-centre rims

Rim Contour

18

DW

5 Drop-centre rims
D

MEANING

106

W and DW rims

DW18L38

Pmin
DW

SAMPLE OF RIM MARKING

Hmin

Rim specification

DW

Hmin

D
DW

G
Hmin

Pmin

DW

D GD G

Hmin

Pmin

A
Pmin

DW

G
Hmin

D
W

rim specification

DW

Pmin

G Hmin Hmin
G

W
D

A
Pmin

D A
100.8

107

Legend & definitions

Terms and shortcuts used in this catalogue

108

Acronyms

Meaning

Definition

PR

Ply Rating

Identifies different versions (load capacity/inflation pressure) of tyres

having the same size designation.

TYPE

Tubeless or Tube Type

Tubeless (TL) Tyres specifically designed for fitment without an inner

tube on appropriate rims. Tubeless tyres may be used with a tube.

LI

Load Index

Is a numerical code associated with the maximum load a tyre can carry
at the speed indicated by its Speed Symbol under service conditions
specified by the tyre manufacturer.

SS

Speed Symbol

Indicates the maximum speed at which the tyre can carry a load
corresponding to its Load Index under service conditions specified by
the tyre manufacturer.

Acronyms

Meaning

Definition

Rolling Circumference
(theoretical nominal)

The circumference of the tyre loaded at the maximum load capacity

and with the corresponding tyre pressure.

Tyre Load Carrying

Capacity

The maximum load (kg) a tyre is permitted to carry under specified

operating conditions. In the case of twin-fitted driven wheels, a factor
of 1.76 is applied to the load capacity of a single fitment tyre.

Inflation Pressure

The cold pressure (kPa) of the fluid with which the tyre is inflated.

HLV

High Load Variation

Is where the tyre load varies by a factor of 2 or more between loaded

and unloaded conditions. The inflation pressure must be increased for
HLV application, consult the tyre manufacturer for details. In the case
of HLV, the maximum distance should not exceed 1 km and maximum
speed 10km/h. For a longer distance or higher speed, consult the
tyre manufacturer. Example of purpose: without HLV normal use
with constant load in transport service, on tractor in field service, e.g.
trailer, tractor; with HLV use with various load conditions, factor > 2
between loaded and unloaded, e.g. loaders

LOAD CAPACITY

Free Rolling Wheels

Free rolling wheels, which do not transmit motion, e.g. trailer.

Drive Wheels

Drive wheels, which transmit motion, e.g. drive wheel axle on tractors.

LLV

Low Load Variation

Standard application with low load difference between loaded and

unloaded conditions.

RIM

Recommended Rim

The rim which gives the best fitment of the tyre for all conditions and
types of service.

WATER 75%

Capacity of Water

Capacity of water for Water balasting.

RIM (PERMITTED)

Permitted Rim

Any rim which can be permitted in addition to the recommended rim.

ETRTO

The European Tyre

and Rim Technical
Organisation

Data in this Technical Databook are consistent with ETRTO standards.

New Tyre Dimensions

The dimensions of an unloaded new tyre mounted on its Measuring

Rim at the recommended inflation pressure and allowed to stand
for a minimum of 24 hours at normal room temperature before
readjustment of the pressure back to its original level.

Speed Radius Index

The Speed Radius Index is by convention a parameter used exclusively

for the calculation of the theoretical speed of tractors during European
Union homologation procedures and for interchangeability of different
tyre sizes.

Section Width
(design)

The linear distance between the outsides of the sidewalls of an inflated

new tyre excluding elevations due to labelling (marking), decorations,
orprotective bands or ribs.

Nominal Section
Width

The section width of an inflated tyre mounted on its theoretical rim and
indicated in the tyre size designation.

Overall Diameter
(design)

The diameter of an inflated tyre at the outermost surface of the tread.

IND

Agricultural tyres for traction wheels for construction applications with

load capacities and inflation pressures which differ from those for tyres
with the same size designation for use on agricultural tractors.

Static Radius
(theoretical nominal)

The radius of the new tyre loaded at the maximum load capacity and
with the corresponding tyre pressure.

REINFORCED

Tyres with better protection against tyre damage (puncture). The load
capacity and tyre dimensions remain standard.

109

CGS holding

CGS holding, our parent company

Mitasa.s. belongs to CGS a.s., a holding company with the most
comprehensive portfolio of rubber production in the Czech Republic.
CGS a.s. manufactures and globally distributes products for the automotive
industry and other industries.

110

CGS holding subsidiaries, brands,

products and services
subsidiaries

Brands

Product & services

Agricultural tyres
MPT, Earthmoving and Fork lift
tyres
Motorcycle tyres
Truck tyres
Aircraft tyres
Rubber compounds
Rubber moulded parts
Antivibrating systems
Sealing elements
Rubber roller coatings
Silicon rubber products
Rubber-textile fabric products
V-belts
Bicycle tyres and tubes
Rubber processing machinery
Piston rings
Art casting
Casting

Chemical vessel rubber coating

Curing moulds and testing

111

MITAS a.s. is fully compliant with the limits on Polycyclic Aromatic

Hydrocarbons (PAHs) determined by the European Directive EC/2005/69
and REACH Regulation EC/1907/2006, since December 1st 2009.

MITAS a. s.
vehlova 1900, 106 25 Prague 10, Czech Republic
Phone: +420 267 111 522 Fax: +420 271 750 214
[email protected]
www.mitas-tyres.com

GS / M:10 / 2011 / I

Your distributor / dealer