WEBSITE: www.jdsu.

com/test
COMMUNICATIONS TEST & MEASUREMENT SOLUTIONS
Key Benefits
Ethernet Service Interface Module (SIM)
Gigabit Ethernet Testing for the HST-3000
Te JDSU HST-3000 platform just got even better. Equipped with the Ethernet Service
Interface Module (SIM) along with SAMComplete testing, fully compliant with
ITU-T Y.1564, and fber inspection and optical power measurement capability, the
HST-3000 accelerates carrier Ethernet service provisioning and mean-time-to repair.
Accurately and simultaneously delivering IP video, voice, and data trafc over
a structured Ethernet transport requires more than just a single Layer 2 or 3 pipe
test. Te HST-3000 puts the power of multi-layer access network and carrier
Ethernet service provisioning and troubleshooting in the palm of your hand. With
SAMComplete service activation testing, fully compliant with ITU-T Y.1564,
the HST-3000 emulates trafc simultaneously carrying IP video, voice, and data
content to accurately validate structured Ethernet service-level agreements
(SLAs). SAMComplete guides users through simple test setup and operation with
easy-to-interpret results that can be saved using an innovative user interface. Te
HST-3000s fexibility performs across various network infrastructures and tunnel-
ing technologies (VLAN, MAC-in-MAC, and MPLS) that provide common quality
of service (QoS), trafc engineering, redundancy, and scalability across the service
infrastructure.
For carrier Ethernet services deployed over optical fber, up to 90 percent of perfor-
mance faults are traceable to dirty or damaged fber interfaces. Te JDSU P5000i,
the worlds most versatile and reliable analysis microscope, mounts to the HST-3000
USB interface for unique, objective pass/fail fber inspection that removes subjective
guesswork. Te included FiberChekPRO sofware certifes fber end-face quality to
industry standards (including IEC 61300-3-35) or customer specifcations.
Single, compact module for testing next-generation carrier
Ethernet
Automated SAMComplete/ITU-T Y.1564 test accurately
measures KPIs for structured voice, video, and data
Flexible to support packet-based networks and optional legacy
TDM testing
Supports Gigabit or 100 Mbps optical as well as 10/100 Mbps
twisted-pair Ethernet
Ofers fber inspection and optical power meter to certify fber
connections and performance
Speeds service delivery and ensures that all voice, video, and
data services meet required bandwidth and performance
requirements
Key Features
Electrical and optical Ethernet testing
in a single module
SAMComplete provides Y.1564 ser-
vice-activation testing methodology
Layer 2, 3, and 4 trafc generation up
to interface line rate
Automated RFC 2544 tests at Layers 2
to 4 (Eth/IP/TCP/UDP)
Supports Ethernet OAM, PBB/PBT,
MPLS, VLAN, and Q-in-Q
Options for VoIP and IP video/Micro-
sof TV testing
Dual-port Tru mode confguration
enables live trafc analysis
Optional USB-mounted P5000i ofers
unique pass/fail fber inspection
2
HST-3000 ETHERNET SIM
Carrier Ethernet Installation Testing
ITU-T Y.1564 SAMComplete Service-Activation Testing
SamComplete is an easy-to-use tool to quickly and easily measure service-level
agreement (SLA) performance according to ITU-T Y.1564 service-activation
methodology. Te feature suite, available on HST-3000s with the multiple streams
option, validates user-defned SLAs by frst testing each service independently
during service confguration test. If the service confguration test passes, all streams
are tested simultaneously during the service-performance test. SAMComplete
provides pass/fail results for key performance indicators (KPIs) including com-
mitted information rate (CIR), extended information rate (EIR), frame delay (FD),
frame-delay variation (FDV) and frame-loss rate (FLR) independently for up to
eight simultaneous services.
SAMComplete employed in the HST-3000, as well as in the JDSU T-BERD/MTS-5800,
-6000, -8000, and QT-600 ofers the unique time-saving capability to stop the service
confguration test in the event of a failure, saving technicians valuable time.
Service-performance test (multistream) tests all streams simultaneously
Mbps Mbps
Transmitted trafc
Service 1
CIR
Service 2
CIR
Service 3
CIR
Measured trafc
Frame Delay
Frame Delay Variation
Frame Loss Rate
Frame Delay
Frame Delay Variation
Frame Loss Rate
Frame Delay
Frame Delay Variation
Frame Loss Rate
@
Service confguration test (ramp test) validates each service/stream
MIR
Time
1 to 60 s
Level below which
SLA parameters
are verifed
Max Throughput
Threshold
Policing = Discard Guaranteed Drop
Throughput and SLA
Not Guaranteed
All Trafc Compliant to
Delay, Jitter, and Frame Loss SLA
EIR
CIR
3
HST-3000 ETHERNET SIM
HST-3000 SAMComplete test summary
RFC 2544 latency/round-trip delay (RTD) test
results report
Enhanced RFC 2544 Testing
Te HST-3000 delivers all the carrier Ethernet testing needed to qualify Ethernet-
based transport networks. In addition to supporting Ethernet CIR, FD, FLR, and
back-to-back burst testing required in the de facto industry standard RFC 2544, the
HST-3000 also tests packet jitter or FDV to ensure circuit readiness for transport-
ing time-sensitive services such as Internet TV (IPTV) and voice over IP (VoIP).
JDSU-enhanced RFC testing measures CIR, FD, and FV concurrently to reduce test
times by more than 60 percent and delivers a zeroing-in algorithm to more quickly
establish maximum throughput on an Ethernet virtual circuit (EVC). Using a pair
of test sets and asymmetric RFC testing, users can validate EVCs with diferent
upstream and downstream CIRs or they can test sequentially in both directions to
ensure any connection type meets the KPIs.
SLA Verifcation with Multiple Trafc Streams
Many service providers now realize the value of testing more than just a single
Ethernet stream to the customer when providing multiple services over the same
Ethernet transport. It is extremely critical to test diferent classes of service (CoSs)
to ofer customers tiered services or to prioritize trafc and efectively manage tri-
ple-play networks. Tese deployments lead to new challenges where latency and loss
may not afect regular trafc, but higher-priority trafc fails to meet its required SLA.
To ensure that delivery meets SLA requirements for structured voice, video, and data
services, technicians can use the multiple streams option to measure Layer 2, 3, and
4 performance and oversubscribe the network elements to determine if the various
SLAs are met. Technicians can generate up to eight simultaneous trafc streams,
with difering encapsulation and priority schemes, locate performance bottlenecks
and accurately establish SLA guidelines.
PBB-TE/PBT
Provider backbone bridging with trafc engineering/transport (PBB-TE/PBT)
ofers an enhancement to Ethernet (IEEE 802.1ah/802.1Qay) that was developed
to meet the scalability requirements of metro/aggregation networks. By adding a
backbone tag (B-TAG), operators can aggregate and maintain large numbers of
links and services. Te HST-3000 PBB/PBB-TE test suite lets users terminate or
monitor a PBB/PBB-TE trunk or generate and analyze trafc with backbone MAC/
VLAN ID (B-MAC/B-VID) and service ID (I-SID).
4
HST-3000 ETHERNET SIM
Ethernet OAM
Ethernet operation, administration, and maintenance (OAM) gives service pro-
viders a critical tool for troubleshooting carrier Ethernet services. Te HST-3000
Ethernet service-layer OAM test suite lets customers monitor the status of a link,
automatically identify open links, and generate loopback and linktrace mes-
sages for path verifcation and discovery. Te test suite complies with ITU Y.1731/
IEEE 802.1ag Connectivity Check (CCM/ETH-CC), Loopback (LBM/ETH-LB),
and Linktrace (LTM/ETH-LT) messages. With Link Layer OAM (IEEE 802.3ah
Ethernet First Mile), users can discover peer devices, monitor alarms, and provide
link-level loopback capability.

Ethernet OAM testing
VoIP Testing
Successful VoIP service turn-up and troubleshooting requires proving connec-
tivity to the signaling gateway, feature availability, and call quality. Te HST-3000
can emulate an IP phone and place and receive VoIP calls via a huge range of
VoIP signal gateways, including Cisco SCCP (Skinny), session initiation protocol
(SIP), media gateway control protocol (MGCP), MEGACO, H.323, and Nortel
Unifed Networks IP Stimulus (UNIStim). Te HST-3000 provides an objective
packet-based measurement of VoIP provisioning by placing actual VoIP calls and
measuring call quality of out-of-sequence packets by analyzing delay, jitter, and
packet loss. Te HST-3000 measures call quality based on Telchemys patented
single-ended live-call method of assessing subjective voice quality in terms of both
mean opinion score (MOS) and R-factor in real time. Te HST-3000 then com-
pares objective and subjective measurements to accurately verify acceptable VoIP
call quality. Te HST-3000s unique VoIP inspector mode automatically detects
network confgurations/customer premises equipment (CPE) confgurations/sig-
naling type and attributes, to rapidly reduce confguration time. For unsupported
gateway signaling, such as over a satellite link, the HST-3000s convenient auto-
answer mode automatically answers and provides the required KPIs for analysis.
VoIP call analysis
CPE NIU Switch Switch CPE NIU
Core
ITU Y.1731
Service Layer OAM (UNI to UNI)
Connectivity Layer OAM
Access Link OAM
IEEE 802.1ag
IEEE 802.3ah
8
0
2
.
1
a
j

d
e
m
a
r
c
a
t
i
o
n
8
0
2
.
1
a
j

d
e
m
a
r
c
a
t
i
o
n
Access Link OAM
5
HST-3000 ETHERNET SIM
IP video QoS analysis
IP Video Testing
IP-based video services are helping traditional telecommunications service provid-
ers grow revenues by ofering new and diferentiated services. However, delivering
good quality of experience (QoE) cost-efectively is complex and demanding. Te
HST-3000 can help accomplish this task with a suite of video test options that can
be fned-tuned to the needs of various networks and feld crews. It supports both
video on demand (VoD) and broadcast service analysis, new service installation
and troubleshooting, root-cause analysis that quickly separates source issues from
distribution network ones, and matches specifc quality of service (QoS) metrics to
thresholds tuned to a given network design. Tese advanced test suites include: true
CoS testing that analyzes mixed voice, data, and video trafc in the access network;
MOS analysis with detailed audio, video, and a combined audio-visual (AV) view;
and detailed packet analysis supporting error correction mechanisms operating at
the packet level using Pro-MPEG Forum or Microsof MediaRoom techniques, as
well as packet-loss distribution analysis. Te MediaRoom analysis further analyzes
R-UDP error-recovery mechanisms as well as instant channel change (ICC) actions.
Te HSTs copper, DSL, and Ethernet test interfaces and operating modes, includ-
ing terminate, monitor, and through, coupled with the advanced test suites simplifes
multilayer analysis, expanding possible depths for problem-solving and root-cause
analysis. Simple pass/fail indicators for critical KPIs make the HST easy to use.

Fiber Testing
Fiber Inspection with the P5000i Digital Analysis Microscope
For years, the JDSU HST-3000 Handheld Services Tester has been the one instrument
technicians have trusted for everything from copper testing to service verifcation.
Yet todays carrier Ethernet networks also require fber inspection to assure error-free
performance given that the primary cause for poor performance in optical networks
is contaminated fber connectors. Adding the JDSU P5000i Digital Fiber Inspection
probe to the HST-3000 gives technicians an essential tool that bridges the gap
between copper and fber testing as they expand into verifying Carrier Ethernet net-
works or various fber (FTTx) connections terminated in a fber-fed digital subscriber
line access multiplexer (DSLAM). Te USB-mounted P5000i with FiberChekPRO
provides unique, reliable pass/fail analysis to quickly and easily certify that every con-
nection in the network is optimized for a lifetime of performance.
Miniature USB 2.0 Power Meters with FiberChek2 Integration
Te miniature JDSU MP-Series Power Meter measures optical power via a USB 2.0
connected to the HST-3000. Tis unique device enables digital processing of optical
power measurements and integrates directly with JDSU FiberChek2 sofware, the
industry-leading automated fber inspection and analysis program. Te HST-3000
supports two MP power meter models: the MP-60 for 850, 1300, 1310, 1490, and
1550 nm connections, and the MP-80 for 980, 1310, 1480, and 1550 nm connec-
tions. Te size, functionality, and ease-of-use of these tools make them extremely
useful and practical for testing optical power levels.
Fiber inspection with a USB-mounted P5000i
Digital Analysis Microscope
Optical power measurement with the MP-60
6
HST-3000 ETHERNET SIM
Physical
Size (h x w x d) 241 x 114 x 70 mm (9.5 x 4.5 x 2.75 in)
Weight (with battery) 1.23 kg (2.7 lb)
Operating temperature 5.5 to 50C (22 to 122F)
Storage temperature 40 to 65.5C (40 to 150F)
Battery life 10 hrs. typical usage
Charging time 7 hrs. from full discharge to full charge
Operating humidity 10 to 80% relative humidity
Storage humidity 10 to 95% relative humidity
Display 3.8 diagonal, 1/4 VGA, Color Active Matrix
with backlight (readable in direct sunlight)
Test Interfaces
Optical Ethernet/IP
100/1000 Mbps Dual SFP ports
Electrical Ethernet/IP
10/100/1000 Mbps Dual RJ45 ports
Test Modes
Terminate
Monitor/Thru (bidirectional monitor)
Ethernet (Layer 2)
Duplex modes Full, half
Flow control Supported
Trafc generation Constant, ramp, bursty
Payload ATP, BERT
Frame length 64-1526 bytes, user-defned,
undersized, jumbo, random
MAC addressing Confgurable source and
destination MAC addresses
Frame format 802.3 or DIX
ARP mode Enable, disable
VLAN settings ID, priority
QinQ settings TPID, customer VLAN ID,
customer VLAN priority,
service provider VLAN ID,
service provider priority, and
service provider, DEI bits
MPLS settings Label, priority, TTL,
MPLS Ethertype (Unicast or Multicast),
# MPLS Labels (1 or 2)
J-Proof (Layer 2 Transparency Settings) Frames 1 through 20
Protocol STP, RSTP, MSTP, LLDP,
GMRP, GVRP, CDP, VTP
or user-defned
Number of Frames Transmitted 1 to 100
MAC-in-MAC Settings Backbone Source MAC Address Type,
Backbone Destination Address,
Backbone Tag, VLAN ID, Priority, DEI Bit, I-Tag,
I-Tag Priority, I-Tag DEI Bit,
I-Tag UCA Bit, I-Tag Service ID
MAC-in-MAC Filters B-Tag VLAN ID, B-Tag DEI Bit,
I-Tag Priority, I-Tag DEI Bit, I-Tag UCA Bit,
I-Tag Service ID, Customer Frame Filter
Ethernet OAM Settings
OAM Type 802.1.ag/Y.1731
Service Layer OAM Continuity Check Messages (CCM)
Loss of Continuity Threshold,
CCM Rate, CCM Type, MEG ID,
Peer MEG End ID, MD Level,
Peer MEG End ID
Service Layer OAM Alarm Indication Signal (AIS) MD Level,
AIS Rate
Service Layer OAM Loopback Message (PING) MD Level,
LBM Type
Service Layer OAM LTM/LTR (Trace route) MD Level
Link Layer OAM Local Confg Active/passive, Vendor OUI,
Vendor-specifc info., Max PDU size,
Link Events, Remote Loopback, Variable Retrieval
Link Layer OAM Defects Link Fault, Dying Gasp,
Critical Event
Link Layer OAM Events Symbol Period Window, Symbol Period
Threshold, Frame Window, Frame Threshold,
Frame Period Window, Frame Period Threshold,
Frame Second Summary Window,
Frame Second Summary Threshold
Bit error testing patterns PRBS (223
-1
, 231
-1
,
and inverted selections),
all Ones, all Zeros, user-defned
Framed pattern test per NCITS TR-25:1999 CRPAT,
CJPAT, CSPAT
Trafc fltering MAC source address,
MAC destination address,
Frame type/length, VLAN ID,
VLAN Priority, SVLAN ID,
SVLAN Priority, MPLS Label, MPLS Priority
IP Version 4 (Layer 3) Specifcations
Trafc generation Constant, ramp, bursty
Data mode (electrical only) IPoE, PPPoE
IP addressing Confgurable source and
destination IP addresses, TOS/DSCP
Trafc fltering Source IP address,
destination IP address,
TOS/DSCP, VLAN ID,
VLAN Priority, SVLAN ID,
SVLAN Priority, MPLS Label, MPLS Priority
IP Version 6 (Layer 3)
Trafc generation Constant, ramp, bursty
IP addressing Stateless autoconfguration,
Stateful autoconfguration, Manual
Trafc fltering Source IP address,
Source prefx, Destination IP,
Destination Prefx Trafc Class Type,
VLAN ID, VLAN Priority,
SVLAN ID, SVLAN Priority
TCP/UDP (Layer 4)
Trafc mode TCP, UDP
Port addressing Source, Destination
Multiple Streams
Number of streams 8
Stream modes Layer 2, Layer 3, Layer 4
Encapsulations VLAN ID, VLAN Priority,
SVLAN ID, SVLAN Priority
SAMComplete (ITU-T Y.1564)
Test modes Disable, symmetric
Layers 2, 3
Streams Eight
Loop type Broadcast, Unicast
Frame formats DIX, 802.11
Service type Data, voice, HDTV, SDTV
Length types Frame, packet
Frame lengths 64, 128, 256, 512, 1024, 1280, 1580,
random, user-defned
Packet lengths 40, 64, 128, 256, 512, 1024, 1500,
random, user-defned
Encapsulation None, VLAN, QinQ
Thresholds CIR, EIR, policing, FL, M value, FD, and FDV
RFC 2544
Test modes Disable, symmetric, asymmetric upstream,
asymmetric downstream, asymmetric combined
Layers 2, 3, and 4
Length type Frame, packet
Frame lengths 64, 128, 256, 512, 1024, 1280,
1518, 9600, user-defned, disable
Packet lengths 40, 64, 128, 256, 512, 1024,
1500, 9582, user-defned, disable
Test selections Throughput, latency (RTD),
packet jitter, system recovery,
frame loss, back-to-back frames,
maximum bandwidth
Frame lengths 64, 128, 256, 512, 1024, 1280,
1518, 9600, user-defned, disable
Cable Testing
Optical Power measurement, SFP Vendor Name
CAT V cable Link speed, link status,
crossover/straight,
distance to fault, pin mapping,
pair length, polarity, skew
Power over Ethernet Indicates if the power supply
responds to Class 1 power requests
Specifcations
7
HST-3000 ETHERNET SIM
Base units
Part Number Description
HST3000-NG HST-3000 Mainframe without Copper (Color)
HST3000C-NG HST-3000 Copper Mainframe (Color)
Available SIMS (Modules)
HST3000-4WLL 4-wire Local Loop
HST3000-AR2A ADSL1/2/2+ (ATU-R, Annex A)
HST3000-AR2B ADSL1/2/2+ (ATU-R, Annex B)
HST3000-BLK Blank
HST3000-BRA ETSI (Euro) ISDN BRA
HST3000-BRI ISDN BRI
HST3000-CAR2A ADSL1/2/2+ with Copper (ATU-R, Annex A)
HST3000-CAR2A-TI Copper, ADSL2+ TI (ATU-R, Annex A)
HST3000-CAR2B-TI Copper, ADSL2+ TI (ATU-R, Annex B)
HST3000-CSH4 Copper, 4-wire G.SHDSL
(STU-R/C, Annex A/B)
HST3000-CT1 T1 and Copper
HST-3000-CU Dual T/R/G Interface to Copper Test SIM
HST3000-CUCE Copper only SIM, CE Marked
HST3000-DC Datacom
HST3000-E1 E1
HST3000-E1-DC E1/Datacom
HST3000-ETH 10/100/1000 Ethernet
HST3000-GSH G.SHDSL
HST3000-T1 Dual Tx/Rx Bantam T1 Interface and T1
HST3000-T3 Dual Tx/Rx Bantam T1 Interface, and Dual Rx/
Single Tx BNC DS3 Interface/and DS3
HST3000-WB2 Wideband 2 (up to 30 MHz) Copper Test
Software Options
HST3000-802.11 802.11 Wireless
HST3000-BLUETOOTH Bluetooth Wireless
HST3000-COS Class of Service
HST3000-DSL2 ADSL2 and ADSL2+
HST3000-FR Frame Relay
HST3000-FTP FTP
HST3000-IPV6 IPv6
HST3000-MPLS MPLS
HST3000-MSTR Multiple Streams
HST3000-MSTV Microsoft IPTV Video Analysis
HST3000-OPTETH Optical Ethernet
HST3000-PCMSIG Signaling (PCM)
HST3000-PCMTIMS TIMS (PCM)
HST3000-PRI ISDN PRI (NC Standard)
HST3000-PS Pulse Shape
HST3000-REMOP Remote Operation
HST3000-RFL RFL
HST3000-SCRIPT Scripted Test
HST3000-SPE Spectral Noise
HST3000-ST Basic Rate ISDN S/T (ANSI)
HST3000-T1DDS DDS-T1
HST3000-TCPUDP TCP/UDP
HST3000-TDR TDR
HST3000-TxIMP Transmission Impairments
HST3000-UNISTIM VoIP Signaling Call Controls for UNISTIM
HST3000-VT100 VT100 Emulation
HST3000-WBTONES WB TIMS
HST3000S-H.323 H.323 VoIP Signaling
HST3000S-IP Advanced IP Suite
PING and Through Mode Support
HST3000S-IP-Video IP Video Analysis
HST3000S-MGCP SCCP MGCP VoIP Signaling
HST3000S-MOS VoIP Mean Opinion Score
HST3000S-SCCP SCCP VoIP Signaling
HST3000S-SIP SIP VoIP Signaling
HST3000S-VMOS Video MOS Analysis
HST3000S-VOIP VoIP Software Analysis
HST3000S-WEB Web Browser
FIT-SD103-C Kit: P5000i, MP-60, FiberChekPRO software,
case, tips, adapters, and cleaning materials
FIT-SD103 Kit: P5000i, MP-60, FiberChekPRO software,
case, tips, and adapters
FBP-SD101 Kit: P5000i Digital Analysis Microscope,
FiberChekPRO software, case, and 4 tips
MP-60 USB Optical Power Meter
(850, 1300, 1310, 1490, and 1550 nm)
MP-80 USB Optical Power Meter
(980, 1310, 1480, and 1550 nm)
Ordering Information
HST-3000 ETHERNET SIM

Product specifcations and descriptions in this document subject to change without notice. 2012 JDS Uniphase Corporation 30149220 007 1012 HSTETHSIM.DS.ACC.TM.AE October 2012
Test & Measurement Regional Sales
NORTH AMERICA
TEL: 1 855 ASK-JDSU
1 855 275-5378
LATIN AMERICA
TEL: +1 954 688 5660
FAX: +1 954 345 4668
ASIA PACIFIC
TEL: +852 2892 0990
FAX: +852 2892 0770
EMEA
TEL: +49 7121 86 2222
FAX: +49 7121 86 1222
WEBSITE: www.jdsu.com/test