Ancillary Gas Handling and Control Equipment
Pressure Gauges
420
Standard Pressure Gauges
Ancillary Equipment
Description
Standard Gauges
Matheson offers a wide variety of gauges suitable for most
laboratory and pilot plant operations. All of the gauges offered by
Matheson are constructed with the inlet located on the bottom of
the gauge and are cleaned for oxygen service.
Matheson has adopted a dual unit measurement system for the
majority of the gauges supplied. These gauges indicate both psig
and kPa units of measure.
Test Gauges
These gauges are accurate to 0.25% of full scale. Typically, these
gauges are used to monitor critical process equipment within a
facility. For ease of reading, they are 6 in diameter with very
precise and incremental measurement graduations and mirrored
scales. Construction is Monel and operating temperature range is
from -20F to 150F (-30C to 66C). All gauges are cleaned for
oxygen service.
All accuracies are stated as a percentage of the full scale reading
of the gauge. Brass and Monel gauges are accurate to 3% for the
first third of the scale, 2% for the middle third of the scale and
3% for the last third of the scale. All stainless steel gauges are
accurate to 1% full scale and are heliarc welded tube to socket.
All stainless steel VCR inlet gauges are VCR female butt welded
from the connection to the socket.
The operating temperature range for standard gauges is from
-40F to 140F (-40C to 60C).
www.mathesontrigas.com
Ancillary Gas Handling and Control Equipment
Pressure Gauges
421
Standard Gauges (continued)
Ordering Information
Standard Gauges Monel
Standard Gauges - Chrome Plated Brass
2-1/2 Diameter
1/4 MPT
Model No.
N/A
N/A
63-3103
63-3130
63-3106
63-3115
N/A
63-3131
63-3104
63-3161
63-3109
63-3112
63-3122
63-3107
63-3142
63-3113
63-3123
63-3133
63-3143
63-3153
63-3175
4 Diameter
1/4 MPT
Model No.
63-4110
63-4111A*
N/A
N/A
N/A
N/A
63-4102
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
2 Diameter
1/4 FVCR
Model No.
2-1/2 Diameter
1/4 MPT
Model No.
Shipping Weight: 1 lb
*3.5 diameter
Standard Gauges - 316 Stainless Steel
Range
psig (kPa)
2 Diameter
1/4 MPT
Model No.
0-15 (0-100)
63-2215
N/A
N/A
-30-0-30 (-100-200)
63-2204
63-2204V
63-3704
-30-0-60 (-100-400)
63-2206
63-2206V
N/A
0-100 (0-700)
63-2212
63-2212V
63-3212
-30-0-100 (-100-700)
63-2216
N/A
N/A
-30-0-200 (-100-1400)
63-2207
63-2207V
N/A
-30-0-300 (-100-2000)
63-2208
N/A
N/A
0-400 (0-2800)
63-2242
63-2242V
N/A
0-600 (0-4200)
63-2262
N/A
63-3262
0-1000 (0-7000)
63-2213
63-2213V
N/A
0-3000 (0-21,000)
63-2233
63-2233V
63-3233
0-10000 (0-70,000)
N/A
N/A
63-3214
Shipping Weight: 1 lb
www.mathesontrigas.com
Range
psig (kPa)
2-1/2 Diameter
1/4 MPT
Model No.
0-30 (0-200)
63-3331
0-60 (0-400)
63-3361
0-100 (0-700)
63-3312
0-300 (0-2100)
63-3332
0-1000 (0-7000)
63-3313
0-3000 (0-21,000)
63-3333
Shipping Weight: 1 lb
Test Gauges Monel
Range
psig (kPa)
6 Diameter
1/4 MPT
Model No.
760 mmHg-0
Absolute (0 to -100 kPa)
63-5601M
0-14 (0-100)
63-5615M
0-60 (0-400)
63-5661M
0-100 (0-700)
63-5612M
0-200 (0-1400)
63-5622M
0-3500 (0-25,000)
63-5633M
Shipping Weight: 2 lbs
Ancillary Equipment
Range
psig (kPa)
5-0-760 mmHg
0-10 psig
0-35wc (0-9)
0.1-3 (1-20)
0-15 Acetylene
0-15 (0-100)
-30-0-15 (-100-100)
0-30 (0-200)
-30-0-30 (-100-200)
0-60 (0-400)
-30-0-60 (-100-400)
0-100 (0-700)
0-200 (0-1400)
-30-0-200 (-100-1400)
0-400 (0-2800)
0-1000 (0-7000)
0-2000 (0-14,000)
0-3000 (0-21,000)
0-4000 (0-28,000)
0-5000 (0-35,000)
0-7500 (0-49,000)
1-1/2 Diameter
1/8 MPT
Model No.
N/A
N/A
N/A
N/A
N/A
N/A
N/A
63-1131
N/A
63-1161
N/A
63-1112
N/A
N/A
N/A
N/A
N/A
63-1133
N/A
N/A
N/A
