Edition: Export Published: 11/2007

Product catalogue

by

Lapinus

by

Lapinus

RTI, excellence in resafe solutions

Rockwool Technical Insulation (RTI) - a division of the Rockwool Group - is active in the industrial insulation market. For more than 50 years, we have been offering resafe insulation solutions for protecting technical equipment with a complete range of techniques and systems. RTI continues to keep its nger on the pulse. This enables us to deliver high quality products through research, innovation and rigorous training for all our employees. We are committed to providing the best service to you. Your desire for the highest quality is our minimum requirement
All RTI insulation products - pipe sections, slabs, wired mats, lamella mats and loose ll - meet the most stringent quality and safety standards. RTI sets the bar very high. We look for new systems, methods and formulas in each segment. Its a matter of developing more efcient products and further improving the production process and techniques.

The latest information? Whenever and wherever? Just ask us!

As a professional, you strive for a professional end result. Not only will you nd superior quality products in the RTI range, we aim to harmonize the information we supply with the latest technical ndings. However, its always worth checking whether your information is up-to-date. If you have any questions about a specic application or a product characteristic, contact our RTI sales representatives on +31 (0) 475 35 33 88. You can also visit our web site at www.rockwool-rti.com

The best solutions, based on proven expertise and knowledge

To complement our range of superior products, RTI has the experience and technical know-how, developed from our extensive experience, to offer the most appropriate insulation solutions to end users in the petrochemical, energy, shipbuilding and processing industry. In the eld of central heating, air conditioning and re prevention, RTI is also a worldwide leader. Our consultants will be pleased to provide technical backup during the technical specication and design stage.

RTI - experience and know-how

Rockwool Technical Insulation (RTI) is an independent organisation within the Rockwool Group, the worlds largest producer of stone wool products. Rockwool International A/S is based in Hedehusene, Denmark. The parent company had a net turnover of around 1.5 billion in 2006. Rockwool International has 22 factories in 14 countries in Europe, North America and Asia, and has around 8,000 employees in 35 countries.
2

RTIs position as market leader is derived from a combination of extensive technical knowledge, high-grade products, continuous innovation and professional services. In all segments of HVAC, process industry, shipbuilding and passive re protection, our Rockwool products offer unrivalled thermal, re, acoustic and sustainable performance.

Stone wool protects people and the environment

Every year, re kills more than 60,000 people worldwide. The number injured far exceeds this. Loss of life or injury can be catastrophic, however the nancial implications are also considerable. In Europe alone, losses total approximately 53 billion euros. A large-scale re may force a company into liquidation, or result in the loss of priceless cultural buildings. In addition, every re will have an environmental impact. Poisonous substances released during combustion, polluted extinguishing water and re residues are discharged into the environment in an uncontrolled manner. The re retardant and re insulating characteristics of RTIs stone wool products deliver superior protection to people, property and the environment.

By Lapinus, RTI s dynamic export center

Within the RTI company our Lapinus export department is a dynamic cell that is constantly seeking new business opportunities in the domain of technical insulation worldwide. The Lapinus export team is eager to commercialize and promote the extensive Rockwool product range (including Conlit resafe solutions) and is quick in nding out how they can meet the present market demands with the best possible product offer. In order to meet new regulations and standards on energy-saving and re safety matters we took a close look at our present product range and made some important alterations. This resulted in a brand new product catalogue with a clear and powerful branding of all our RTI product solutions supervised by our Lapinus collaborators who know your market. The new catalogue that lies before you is more convenient and easy to use and has a clear product description and reference. It combines all relevant product information (product descriptions, performance, properties, advantages, installation instructions,) with international recognizable product names. Therefore we modied some product names into more appropriate international names with a clear and plain reference to the product itself.

Contents
1

Insulation of technical installations in buildings

Pipe sections for heating & ventilation pipe work 4 Thermal and acoustic insulation of heating & ventilation ducts 6
2

Conlit Fire Protection

Fire rating of wall and oor penetrations Fire protection of heating & ventilation ducts Fire protection of steel structures
3

8 14 16

Rockwool has a melting point above 1000C

RTI stone wool products meet the strictest re protection classes and make an active contribution to the re safety of a building or installation. Other insulation materials combust at much lower temperatures and often release dangerous substances during combustion. Stone wool is non-combustible and only melts above 1000C. As a result, Rockwool insulation inhibits the spread of re, ultimately saving lives and protecting buildings.

Insulation for industry

Application selector Insulation products
4

18 19

Delivery and storage The full contents list can be found in the fold out page at the back of this catalogue.

43

1
Insulation of technical installations in buildings
by

Lapinus

1.1 Pipe sections for heating & ventilation pipe work

Rockwool 810
Qty per 40ft HC container in m1

H&V pipe section

Insulation thickness in mm mm 17 21 27 33 42 48 54 57 60
Packaged in boxes

20 16800 14400 12000 10000 8000 6400 6400 6000 4800 4800 4200 3600 3600 3600 2400 2000

25 12000 10000 10000 8000 6400 6000 4800 4800 4400 3600 3600 3600 2800 2400 2000 2000 1600 1600 1600 1992 1944 1650 1440 1400 1098 896

30 10000 8000 8000 6400 4800 4800 4000 3600 3600 3600 3200 2800 2400 2400 1600 1600 1600 1600 1968 1920 1716 1440 1400 1116 1062 880

40 6400 5200 4800 3600 3600 3600 3200 2400 2400 2400 2000 2000 2000 1600 1600 1944 1896 1694 1672 1480 1440 1116 1080 1044 880 728

50 3600 3600 3600 3200 2400 2400 2000 2000 2000 1600 1600 1600 1992 1944 1694 1650 1480 1440 1400 1260 1116 1044 896 880 728 686

60

2400 2400 2000 1600 1600 1600 1600 1600 1992 1944 1738 1694 1650 1440 1400 1260 1098 1080 1062 1044 880 848 728 700 564

64 70 76 83 89 102 108 114 121 127 133 140 159 169 178 194 219

Shrink-wrapped pipe sections All sections 1000 mm in length.

Other dimensions available upon request.

1.1 Pipe sections for heating & ventilation pipe work

Applications
Rockwool 810 is a pre-formed stone wool pipe section with a factory applied breglass reinforced aluminium foil facing and integral self-adhesive overlap. It is suitable for thermal and acoustic insulation of central heating installations and sanitary pipes.

Advantages
Excellent thermal and acoustic insulation Simple and rapid tting due to the pre-cut side and self-adhesive overlap Wide range of diameters and insulation thicknesses for application on metal and plastic pipe work Suitable for improving the re performance of pipe work, e.g. for plastic pipe work in escape routes Suitable for use over stainless steel Long lasting Close tting so that losses through the seams are restricted to a minimum Fast return on investment

Installation guidelines
Fit the pipe sections closely without any gaping joints, with the lengthwise (horizontal) joint turned towards the underside. Fix the lengthwise seam with the self-adhesive overlap. The end joints should preferably be nished with a self-adhesive aluminium tape (e.g. Rockwool Alux, see p7). If there is a risk of condensation, a vapour barrier should be applied.

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) 10 20 30 40 50 100 EN ISO 8497. ASTM C335 Standard

0.034 0.035 0.036 0.037 0.038 0.045 50 75 100 150 200 250

(BTU.in/ft2.h.F) 0.237 0.246 0.256 0.279 0.307 0.339 Maximum Service Temperature 250C (482F). Non-combustible A1 A2 Non-combustible Low Surface Flame Spread Surface burning characteristics: Flame spread=passed. Smoke development=passed < 10 mg/kg. AS-quality for use on stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 <10mg/kg (pH-value neutral to slightly alkaline) Water absorption < 1 kg/m Water vapour absorption (vapor sorption) 0.02%vol Processsing temperature: -10C (14F) to 50C (122F) Service Application temperature: limited to 80C (176F) 100 - 125 kg/m3 (6.24 - 7.80 lb/ft3) Sd 350 m EN 12086
2

EN 14707. ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 IMO A799 (19) IMO A653 (16) ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 13472 ASTM C1104/C1104M

Reaction to re

Water leachable chloride content

Water absorption Adhesive properties of self-adhesive overlap Nominal density Water vapour resistance aluminium foil Compliance

CINI 2.2.03 Rockwool sections for the thermal insulation of pipes ASTM C547-06 Standard specication for mineral bre pre-formed pipe insulation . type I

Rockwool 810 is certied by ButgB, technical approval ATG 2193

TECHNICAL INSTALLATIONS IN BUILDINGS

by

Lapinus

1.2 Thermal and acoustic insulation of heating & ventilation ducts

Rockwool 133
Rockwool 133, lamella mat Thickness mm Length mm Width mm m2 per collo

Lamella mat

m2 40ft HC

25 30 50

10000 8000 5000

1000 1000 1000

10 8 5

2700 2160 1350

Shrink-wrapped

Applications
Rockwool 133 Lamella Mat is formed from strips of stone wool with vertical bres bonded onto breglass reinforced aluminium foil. Lamella Mat is suitable for the external thermal and acoustic insulation of ventilation ducts, and maintains thickness even on tight bends or corners.

Advantages
Excellent thermal and acoustic insulation Retains insulation thickness, even at tight angles Easy to handle and install Superior re performance enables use of product in escape routes and technical shafts Minimal wastage through reuse of cut pieces

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 10 20 30 40 50 100 EN ISO 8497, ASTMC335 Standard

0.038 0.040 0.041 0.043 0.044 0.054 50 75 100 150 200 300

0.263 0.274 0.286 0.313 0.345 0.421 EN 14706, ASTM C411 NEN 6065 NBN S21-203 ASTM E84 (UL 723) NEN 6066 EN 1609 ASTM C1104/C1104M

133: 250C (482F) Outer foil temperature limited to 80C (176F) Class 1 A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed Negligible Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol density = 37 kg/m3 ( 2 lb/ft3) Sd 350 m

Reaction to re Smoke intensity Water absorption Nominal density Water vapour resistance aluminium foil

EN 12086

Rockwool 133 is certied by ButgB, technical approval ATG 2319

1.2 Thermal and acoustic insulation of heating & ventilation ducts

Installation guidelines
Cut the lamella mat to the right length: Circular air ducts: (diameter + 2x thickness insulation) x 3.14 + 30 mm Right-angled ducts: circumference + 8x thickness insulation + 30 mm For ducts with anged joints, we recommend tting the insulation to the exact width between the anged joints. Rockwool 133 can be mechanically xed using selfadhesive stick pins, adhesive coating or tie rods according to preference. Where there is a risk of condensation on the ange, place an additional loose strip over the ange joint. All joints are to be securely taped with an aluminium tape (e.g. Rockwool Alux; see below) with a minimum width of 75mm. Provide vents at duct joints.

Storage
Rockwool Lamella Mat must be stored in a dry, frost-free environment in the original packaging.

Rockwool Alux
Width mm

NEW
Length m/roll

Self-adhesive aluminium tape

Rolls/ carton

75 100
Dimension of the carton: 330 x 330 x 330 mm.

100 100

16 12

Applications
Rockwool Alux is a self-adhesive, non-combustible and solvent free aluminium tape. The adhesive side is covered with a PE foil, which should be removed before use. Rockwool Alux was specially developed for nishing all Rockwool products faced with aluminium foil, for example Rockwool 133 (EF), Rockwool Klimaboard, Conlit 150U and Conlit Ductrock.

Product properties
Performance Reaction to re A2 Standard DIN 4102-1

Processing temperature: 5C (41F) to 35C (95F) Application temperature: -15C (5F) to 100C (212F) Adhesive properties of self-adhesive overlap For proper adhesion, the base must be dry and dust and grease free. Adhesive strength on steel: > 10N/25 mm

TECHNICAL INSTALLATIONS IN BUILDINGS

2
Conlit Fire Protection
by

Lapinus

2.1 Fire rating of wall and oor penetrations

NEW

Conlit 150 U
Internal diameter mm Insulation thickness mm Outer diameter mm Packaging m/box Internal diameter mm Insulation thickness mm

Penetration seal
External diameter mm Packaging m/box

10 12 14 15 16 17 18 20
Packed in boxes Dimensions of the boxes: 100 x 40 x 40 cm.

25 24 23 22.5 22 21.5 21 20 19.5 19 17.5 17 16.5 26 24 22.5 20 19 29 26 25 38 36 35 33.5 33 58 52.5

60 60 60 60 60 60 60 60 60 60 60 60 60 80 80 80 80 80 100 100 100 130 130 130 130 130 180 180

42 42 42 42 42 42 42 42 42 42 42 42 42 20 20 20 20 20 14 14 14 9 9 9 9 9 4 4

76 76 78 83 89 89 90 102 108 108 110 110 113 114 114 133 135 140 140 159 160 169 210 219 274 324 326

37 52 36 33.5 30.5 65.5 65 39 36 71 35 70 68.5 33 68 43.5 42.5 40 70 30.5 30 40.5 40 40 40 40 40

150 180 150 150 150 220 220 180 180 250 180 250 250 180 250 220 220 220 280 220 220 250 290 299 354 404 406

5 4 5 5 5 2 2 4 4 1 4 1 1 4 1 2 2 2 2 2 2 1 1 1 1 shrink foil shrink foil

21 22 25 26 27 28 32 35 40 42 42 48 50 54 58 60 63 64 64 75

Applications
Conlit 150 U penetration seals were developed in order to allow resafe pipe penetrations through walls and oors. The sections are suitable for re resistant ducts for both metal and combustible pipe work, and for both walls and oors. The external diameter of the sections is suitable for the most common diameters used in core drilling. To seal odd shaped openings Conlit 150 U penetration seals can be used in combination with Conlit Penetration Board.

2.1 Fire rating of wall and oor penetrations

Installation guidelines
The re resistant performance of a pipe aperture depends on various factors such as the type of piping, the diameter, the basic construction, the use of the piping, etc. Firesafe insulation requires special attention to the right choice of materials and installation. Detailed installation instructions are available upon request.

Advantages
Excellent t: the external diameter is equal to core drilling diameters: 60, 80, 100, 130, 150, 180, 220, 250 and 280 mm Clearly identiable markings on the aluminium foil For both metal and plastic pipe work For both solid and plasterboard constructions Simple to install Optimal re safety, combined with acoustic and thermal insulation Tested and assessed by various accredited re laboratories

Product properties Conlit 150U

Performance Thermal conductivity tm (C) (W/mK) 10 0.040 tm (F) (BTU.in/ft2.h.F) 50 0.278 Standard EN 13162 NEN 6065 DIN 4102-1 NEN 6066

Reaction to re Smoke intensity Fire resistance Water absorption Water vapour resistance aluminium foil

Class 1 A2 Negligible

Fire resistant from 30 to 120 minutes in accordance with EN 1366-3 Fire resistance tests for service installation - Part 3: Penetration Seals. Certicate available upon request. Water absorption < 1 kg/m2 Sd 350 m EN 13472 EN 12086

CONLIT FIRE PROTECTION

by

Lapinus

2.1 Fire rating of wall and oor penetrations

Rockwool Conlit Penetration 800 undBoard 800 Vario

Thickness mm
150 mm

Penetration seal
Width mm Packaging m2/box

Length mm

50

1000

600

1.2

Applications
Conlit Penetration Board is faced on one side with printed aluminium foil. The other side is faced with a white breglass scrim. Each box contains two slabs for nishing one penetration. Conlit Penetration Board is developed for sealing openings in re resistant walls and oors where pipe work is installed. In combination with Conlit 150 U and Rockwool 810 pipe sections, Conlit Penetration Board provides re resistance for both metal and combustible pipe work passing through walls and oors. The boards can be placed side by side without clearance.

Advantages
For use in combination with Conlit 150 U or Rockwool 810 Clearly identiable markings on the aluminium foil For use with metal and plastic pipe work. Both types may be combined For use in solid and plasterboard constructions Simple to install Optimal re safety, combined with acoustic and thermal insulation Tested and assessed by various accredited re laboratories

Product properties
Performance Thermal conductivity tm (C) (W/mK) 10 0.040 tm (F) (BTU.in/ft .h.F)
2

Standard 50 0.278 EN 13162 NEN 6065 DIN 4102-1 NEN 6066

Reaction to re Smoke intensity Fire resistance Water absorption Water vapour resistance aluminium foil

Class 1 A2 Negligible

Fire resistant from 30 to 120 minutes in accordance with EN 1366-3 Fire resistance tests for service installation - Part 3: Penetration Seals. Certicate available upon request. Water absorption < 1 kg/m2 Sd 350 m EN 1609 EN 12086

Installation guidelines
The re resistant performance of a pipe aperture depends on various factors such as the type of piping, the diameter, the basic construction, the type of pipe used, etc. Firesafe insulation requires special attention to the right choice of materials and installation. Detailed installation instructions are available upon request.

10

2.1 Fire rating of wall and oor penetrations

Conlit Fire Plug

Diameter mm Length mm Packaging m/box

Fire stop

60 80 100 130 150 180

Packed in boxes

1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

42 14 9 5 4 2 1 1 1

220 250 280 325

Applications
The Conlit Fire Plug is a cylindrical plug made from highdensity stone wool, suitable for the most common diameters used in core drilling. Conlit Fire Plug is intended as temporary ller for apertures to receive future pipework. The plugs can be easily removed and replaced with a Rockwool re resistant penetration.

Advantages
Excellent t: The external diameter is equal to core drilling diameters: 60, 80, 100, 130, 150, 180, 220, 250 and 280 mm For both solid and plasterboard constructions For application in oors and walls Simple to install Optimal re safety, combined with acoustic and thermal insulation Tested and assessed by various accredited re laboratories

Product properties
Performance Thermal conductivity tm (C) (W/mK) 10 0.040 tm (F) (BTU.in/ft2.h.F) 50 0.278 Standard EN 13162 NEN 6064 DIN 4102-1

Reaction to re

Non-combustible A1

Fire resistance Water absorption

Fire resistant from 30 to 120 minutes in accordance with EN 1366-3 Fire resistance tests for service installation - Part 3: Penetration Seals. Certicate available upon request. Water absorption < 1 kg/m2 EN 13472

Installation guidelines
The re resistant performance of a pipe aperture depends on various factors such as the type of piping, the diameter, the basic construction, the type of pipe used, etc. Firesafe insulation requires special attention to the right choice of materials and installation. Detailed installation instructions are available upon request.

11

CONLIT FIRE PROTECTION

20

by

Lapinus

2.1 Fire rating of wall and oor penetrations

Conlit Fix
Product

Special adhesive for re resistant applications

Packaging kg Transport packaging

Conlit Fix Conlit Fix Cold

Bucket 20 kg Plastic tubes 1 kg Bucket 20 kg

33 bucket/pallet 18 tubes/box 33 bucket/pallet

Applications
Conlit Fix is a non-combustible, inorganic water-glass glue specially developed for the installation of Conlit products in re resistant constructions. The main use of Conlit Fix is to glue Conlit stone wool products together. This glue is used for re resistant pipe penetrations, Conlit Ductrock and Conlit Steel Protection.

Advantages
Optimum consistency for easy application Conlit tubes can be used with rellable spray guns Conlit Fix Cold is for application at temperatures slightly below freezing, to -7C

Product properties
Performance Reaction to re Non-combustible A1 Processing temperature: 5C (41F) to 25C (77F) Not to apply below 5C (41C), Conlit Fix Cold: not below -7C(19F) Standard NEN 6064 DIN 4102-1

Adhesive properties

Installation guidelines
The ideal application temperature of Conlit Fix is between 10C and 20C. The glue must be applied at above 5C. For lower working temperatures down to -7C, use Conlit Fix Cold. Glue in tubs should be stirred well before use (the tubes should be kneaded). Application surfaces must be dry, grease-free and dust-free. Surfaces to be glued must not be exposed to water (e.g. rain and condensation). Cover both surfaces with Conlit Fix (1 to 1.5 mm thick) then press rmly together. The curing time is around 12 hours, depending on the ambient temperature.

Storage
Conlit Fix can be kept for up to twelve months in closed packaging when stored under dry conditions, frost-free, at a maximum temperature of 35C.

12

2.1 Fire rating of wall and oor penetrations

Conlit Kit
Product Packaging

Sealing kit for re resistant applications

Tubes/carton

Conlit Kit

Tube 300 ml

20

Packed in carton boxes

Applications
Conlit Kit is a mastic one-component re protection kit, supplied in a tube. It should be used to seal the openings between Conlit 150 U pipe sections and the adjoining construction (up to a width of 30 mm). In the event of a re, Conlit Kit expands slightly to provide a perfect seal.

Product properties
Performance Reaction to re B2 Standard DIN 4102-1

Installation guidelines
Detailed information is available upon request.

Storage
Conlit Kit can be kept for up to 12 months in closed packaging when stored under dry conditions, frost-free, at a maximum temperature of 35C.

13

CONLIT FIRE PROTECTION

by

Lapinus

2.2 Fire protection of heating & ventilation ducts

Conlit Ductrock
Product Thickness mm Length mm

Fire protection board for H&V ducts

Width mm Packaging m2/pallet m2 per 40ft HC container

Conlit Ductrock 60 Conlit Ductrock 90 Conlit Ductrock 120

60 60 60

1500 1500 1500

1200 1200 1200

36 36 36

324 324 324

Packed on wooden pallets

Applications
Conlit Ductrock is a non-combustible stone wool board faced on one side with breglass reinforced aluminium foil. The board contains a special granulate which releases its crystallised water in the event of re. Conlit Ductrock is supplied in a standard thickness of 60 mm. The weight of the board depends on the added granulate. Conlit Ductrock has been specically developed for the re resistant cladding of metal vertical and horizontal right-angled ventilation ducts. Depending on the product used, it is re resistant for 60, 90 or 120 minutes.

Advantages
Optimal re safety, combined with acoustic and thermal insulation Space saving - one layer solution No additional reinforcement for anges and suspensions required For horizontal and vertical ducts For re in- and outside the ducts For both solid and plasterboard constructions Easy to handle, simple to cut to size Fast and easy to install using welded pins and/or parker screws Sturdy and safe: Tested in accordance with the European standard: EN 1366-1:1999

Installation guidelines
The re resistant cladding of ventilation ducts must take into account a range of factors. Detailed installation instructions are available upon request.

Storage
Conlit Ductrock is delivered on pallets which must be stored dry and protected from the weather, stacked no more than two high.

14

2.2 Fire protection of heating & ventilation ducts

Product properties Conlit Ductrock

Performance tm (C) Thermal conductivity (W/mK) 10 0.040 tm (F) (BTU.in/ft2. h.F) A1 A2 50 0.278 EN 13162 EN 13501-1 DIN 4102-1 Standard

Reaction to re Fire protection Water vapour resistance of aluminium foil

Fire resistant from 60 to 120 minutes in accordance with EN 1366-1:1999 Fire resistance tests for service installation - Part 1: Ducts. Certicate available upon request. Sd 350 m EN 12086

15

CONLIT FIRE PROTECTION

by

Lapinus

2.3 Fire protection of steel structures

Conlit Steelprotect Board

Thickness mm Length mm Width mm

Fire protection board for steel structures

Conlit Steelprotect Board Packaging m2/pallet m2 40ft HC container

20 25 30 35

1800 1800 1800 1800

1200 1200 1200 1200

Conlit Steelprotect Board Alu

130.0 97.0 86.0 78.0

1166 1750 778 700

Thickness mm

Length mm

Width mm

Packaging m2/pallet

m2 40ft HC container

25 30 35

1800 1800 1800

1200 1200 1200

97.2 86.0 77.8

1750 778 700

Boards packed in shrink foil

Applications
Conlit Steelprotect Board is a high density non-combustible stone wool re protection board. The board is specially designed for the re resistant cladding of steel constructions. It is available both unfaced and with a breglass reinforced aluminium facing on one side. required re resistance, the steel prole used and the cladding method. Detailed installation instructions are available upon request.

Advantages Installation guidelines

Fire resistant cladding of steel structures is dependent upon a range of factors. The cladding thickness is determined by a combination of proposed steel temperature, Easy to handle, simple to cut to size Light weight and easy to manoeuvre Tested in accordance with EN 13381-4 Can be either glued or screwed into place Special Conlit Screw available for dry and rapid application

Product properties
Performance Reaction to re Non-combustible A0 A1 Fire resistant from 30 to 240 minutes, in accordance with EN13381-4. Certicate available upon request. Water absorption < 1 kg/m2 55 kPa at 10% deformation Sd 350 m EN 1609 EN 826 EN 12086 Standard NEN 6064 NBN S21-203 DIN 4102-1

Fire protection Water absorption Compression resistance Water vapour resistance aluminium foil

16

2.3 Fire protection of steel structures

Conlit Screw
Length mm

NEW

Screw for Conlit Steelprotect Board

Packaging items/bag

40 65 90

1000 1000

Applications
Spiral screw (pig tail) for xing Conlit Steelprotect Board.

Advantages
Easy to t using a cordless drill Bit supplied free of charge with every pack of Conlit Screws

17

CONLIT FIRE PROTECTION

1000

3
Insulation for industry
by

Lapinus

Application selector
Process pipe work Valves, bends, anges Cryogen Tank walls, Voids, seams installations and cold drums boxes Tank roofs Columns Furnaces Boilers Acoustic applications

Loose wool

Rockwool Loose Fill Rockwool Granulate Rockwool 850 Rockwool 851 Rockwool 160

Pipe Sections

Wired Mats

Rockwool 164 Rockwool 159 Rockwool 168 Rockwool Flexiboard Rockwool Multiboard Rockwool HT600

Slabs

Rockwool HT660 Rockwool HT700 Rockwool 251 Rockwool CRS

Remarks
Due to an almost limitless range of applications, we have not provided detail information for all the applications. Information is available in the following manuals/standards for industrial insulation: CINI manual Insulation for industries AGI Q101 (Dmmarbeiten an Kraftswerkkomponenten) DIN 4140 (Insulation work on industrial installations and building equipment) For specic applications, our RTI sales team will be pleased to advise you.
18

3.1 Insulation products

Rockwool 850
Qty per 40ft HC container in m1

Industrial pipe section

mm 17 21 27 33 42 48 57 60 64 70
Packed in cartons Packed in shrinkfoil All pipe sections 1000 mm in length.

25 12000 10000 10000 8000 6400 6000 4800 4400 3600 3600 3600 2800 2400 2000 2000 1600 1600 1600 1992 1944 1650 1440 1098 896 728 686 686 672 468 456 350 340 320

30 10000 8000 8000 6400 4800 4800 3600 3600 3600 3200 2800 2400 2400 1600 1600 1600 1600 1968 1920 1716 1440 1400 1400 1062 880 714 672 672 564 444 340 340 310 280 232 216 150

40 6400 5200 4800 3600 3600 3600 2400 2400 2400 2000 2000 2000 1600 1600 1944 1896 1694 1672 1480 1440 1116 1080 880 728 672 480 480 468 444 350 330 320 240 240 224 156 144 138

50 3600 3600 3600 3200 2400 2400 2000 2000 1600 1600 1600 1992 1944 1694 1650 1480 1440 1400 1260 1116 1044 896 728 686 552 456 456 444 350 340 320 310 232 232 216 150 144 96

60

80

100

120

2400 2400 2000 1600 1600 1600 1600 1992 1944 1738 1694 1650 1440 1400 1260 1098 1080 1062 1044 880 848 700 564 456 444 360 360 340 330 248 240 224 224 208 150 138 96

1600 1200

1440 1420 1400 1116 1098 1080 912 896 880 864 848 742 728 686 672 468 444 350 340 330 330 310 240 232 224 216 208 150 138 96 90

1044 912 896 880 864 848 714 714 700 686 672 672 564 468 456 360 340 330 310 248 248 232 224 216 216 150 150 144 96 90 56 468 468 456 456 444 360 350 330 320 240 232 232 232 224 216 156 150 144 144 102 96 60 56

76 83 89 102 108 114 121 127 133 140 159 169 194 219 245 267 273 280 305 324 356 368 406 419 456 508 558 610

19

INSULATION FOR INDUSTRY

Other dimensions (up to diameters of 915 mm) are available upon request.

by

Lapinus

3.1 Insulation products

Applications
Rockwool 850 is a pre-formed stone wool pipe section. The sections are supplied split and hinged for easy snap-on assembly, and are suitable for the thermal and acoustic insulation of industrial pipe work.

Advantages
Excellent thermal and acoustic insulation Easy to handle and install Wide range of diameters and insulation thicknesses Optimal performance due to the extensive range of diameters Suitable for use over stainless steel For temperatures up to 350C, a support construction is not generally necessary Long lasting Excellent t provides optimal performance Fast return on investment

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.038 100 0.257 100 0.044 200 0.296 150 0.051 300 0.354 200 0.061 400 0.429 250 0.073 500 0.524 300 0.087 600 0.637 EN 14707 ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 IMO A799 (19) IMO A653 (16) ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 13472 ASTM C1104/C1104M EN ISO 8497, ASTM C335 Standard

620C (1148F) 750C (1382F) Non-combustible A0 A1 Non-combustible Low Surface Flame Spread Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10 mg/kg, AS-quality for use on stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods < 10mg/kg (pH-value neutral to slightly alkaline) C692 and C871 Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol 100 - 125 kg/m3 (6.24 - 7.80 lb/ft3) = 1,3 Rockwool sections. For the thermal insulation of pipes. Standard specication for mineral bre pre-formed pipe insulation, type I, II and IV

Reaction to re

Water leachable chloride content Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish. Water absorption Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.03 ASTM C547-06

Rockwool 850 is certicated by ButgB, technical approval ATG 2193

20

3.1 Insulation products

Installation guidelines Rockwool 850

Assembly Fit the Rockwool 850 closely around the pipe, with the lengthwise (horizontal) joint turned towards the underside. The lengthwise joints must be staggered at an angle of at least 30 degrees to each other. The shell is secured with galvanised binding wire (thickness 0.5 mm, at least 3/m). For insulation thickness above 100 mm (or temperatures > 250C) the insulation should be applied in at least two layers. In the case of multi-layer insulation it is recommended that the lengthwise and crosswise joints are staggered (masonry bond). Support construction On pipes where mechanical loading (e.g. strong vibrations) of the insulation is expected and/or the temperature is higher than 350C, a support structure (spacers) should be constructed. The number of spacers depends on the temperature and the mechanical load. As a guide, the following intermediate distances can be used: Horizontal pipe work: 3 to 4 m Vertical pipe work: 5 to 6 m Finishing All pipe sections should be nished with a metal (e.g. aluminium) cladding. Where necessary, expansion joints are required to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8 per metre. Close expansion joints with a steel tensioning wire. Connections to mountings, head and end caps, etc. should be made watertight using an appropriate sealant.

21

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool 851
Qty per 40ft HC container in m1

Industrial pipe section

Insulation thickness in mm. mm 17 21 27 33 42 48 57 60 64

Packaged in boxes Shrink-wrapped pipe sections All pipe sections 1000 mm in length.

25 12000 10000 10000 8000 6400 6000 4800 4400 3600 3600 3600 2800 2400 2000 2000 1600 1600 1600 1992 1944 1650 1440 1098 896 728 686 686 672 468 456 350 340 320

30 10000 8000 8000 6400 4800 4800 3600 3600 3600 3200 2800 2400 2400 1600 1600 1600 1600 1968 1920 1716 1440 1400 1400 1062 880 714 672 672 564 444 340 340 310 280 232 216 150

40 6400 5200 4800 3600 3600 3600 2400 2400 2400 2000 2000 2000 1600 1600 1944 1896 1694 1672 1480 1440 1116 1080 880 728 672 480 480 468 444 350 330 320 240 240 224 156 144

50 3600 3600 3600 3200 2400 2400 2000 2000 1600 1600 1600 1992 1944 1694 1650 1480 1440 1400 1260 1116 1044 896 728 686 552 456 456 444 350 340 320 310 232 232 216 150 144

60

80

100

120

2400 2400 2000 1600 1600 1600 1600 1992 1944 1738 1694 1650 1440 1400 1260 1098 1080 1062 1044 880 848 700 564 456 444 360 360 340 330 248 240 224 224 208 150 138 1440 1420 1400 1116 1098 1080 912 896 880 864 848 742 728 686 672 468 444 350 340 330 330 310 240 232 224 216 208 150 138 96 1044 912 896 880 864 848 714 714 700 686 672 672 564 468 456 360 340 330 310 248 248 232 224 216 216 150 150 144 96 90 468 468 456 456 444 360 350 330 320 240 232 232 232 224 216 156 150 144 144 102 96 60

70 76 83 89 102 108 114 121 127 133 140 159 169 194 219 245 267 273 280 305 324 356 368 406 419 456 508 558

Other dimensions (up to diameter of 915 mm) are available upon request.

22

3.1 Insulation products

Applications
Rockwool 851 is a pre-formed high density stone wool pipe section. The sections are supplied split and hinged for easy snap-on assembly, and are especially suitable for the thermal and acoustic insulation of industrial pipe work which is exposed to high temperature and light (e.g. vibrations) mechanical loads.

Advantages
Excellent thermal and acoustic insulation Easy to handle and install Wide range of diameters and insulation thicknesses Optimal performance due to the extensive range of insulation thicknesses Suitable for use over stainless steel For temperatures up to 350C, support construction is not generally necessary Long lasting Excellent t provides optimal performance Fast return on investment

Product properties Rockwool 851

Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.038 100 0.255 100 0.044 200 0.298 150 0.051 300 0.353 200 0.059 400 0.416 250 0.069 500 0.490 300 0.079 600 0.574 EN 14707 ASTM C411 EN ISO 8497, ASTM C335 Standard

640C (1184F) 750C (1382F) Non-combustible A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 <10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m Water vapour absorption (vapor sorption) 0.02%vol 140 kg/m3 (8.75 lb/ft3) = 1.3 Rockwool sections. For the thermal insulation of pipes. Standard specication for mineral bre pre-formed pipe insulation, type I, II and IV
2

Reaction to re

Water leachable chloride content

EN 13468 ASTM C795 ASTM C871 EN 13472 ASTM C1104/C1104M

Water absorption Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish. Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.03 ASTM C547-06

23

INSULATION FOR INDUSTRY

NEN 6064 DIN 4102-1 ASTM E84 (UL 723)

by

Lapinus

3.1 Insulation products

Installation guidelines
Assembly Fit the Rockwool 851 closely around the pipe, with the lengthwise (horizontal) joint turned towards the underside. The lengthwise joints must be staggered at an angle of at least 30 degrees to each other. The shell is secured with galvanised binding wire (thickness 0.5 mm, at least 3/m). For insulation thickness above 100 mm (or temperatures > 250C) the insulation should be applied in at least two layers. In the case of multi-layer insulation it is recommended that the lengthwise and crosswise joints are staggered (masonry bond). Support construction On pipes where mechanical loading (e.g. strong vibrations) of the insulation is expected and/or the temperature is higher than 350C, a support structure (spacers) should be constructed. The number of spacers depends on the temperature and the mechanical load. As a guide, the following intermediate distances can be used: Horizontal pipe work: 3 to 4 m Vertical pipe work: 5 to 6 m Finishing All pipe sections should be nished with a metal (e.g. aluminium) cladding. Where necessary, expansion joints are required to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8/metre. Close expansion joints with a steel tensioning wire. Connections to mountings, head and end caps etc. should be made watertight using an appropriate sealant.

24

3.1 Insulation products

Rockwool Duraex
Thickness mm Length mm Width mm Packaging m2/roll

Insulation mat
m2 per 40ft HC container

30 40 50 60 70 80
Shrink-wrapped

8000 6000 5000 4500 4000 3500 3000 8000

500 500 500 500 500 500 500 500

8.0 6.0 5.0 4.5 4.0 3.5 1.5 1.5

2336 1752 1400 1170 1000 875 780 700

90 100

Applications
Rockwool Duraex is a stone wool insulation mat bonded onto breglass reinforced aluminium foil. The insulation mat is suitable for the thermal and acoustic insulation of especially vessels, ducts, and equipment up to intermediate temperatures.

Advantages
Excellent thermal and acoustic insulation Easy to handle and install

Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature Reaction to re Water absorption Water leachable chloride content Compression resistance Nominal density Water vapour resistance alumnium foil Compliance 50 0.043 100 0.280 100 0.053 200 0.339 150 0.064 300 0.415 200 0.077 400 0.508

Standard

EN 12667, ASTM C177

300C (572F). Outer foil temperature limited to 80C A2 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 > 10 kN/m2 60 kg/m (3.75 lb/ft ) Sd 350m Rockwool Lamella Mats for the thermal insulation of air ducts, pipe bundles and equipment
3 3

EN 14706, ASTM C411 DIN 4102-1 ASTM E84 (UL 723) EN 1609 ASTM C1104 ASTM C795 DIN 52272-1

EN 12086 CINI 2.2.05

25

INSULATION FOR INDUSTRY

Product properties

by

Lapinus

3.1 Insulation products

Rockwool 160
Thickness in mm Length in mm Width in mm Packaging m2/roll

Wired mat
m2 per 40ft HC container

30 40 50 60 75 80
Shrink-wrapped

8000 6000 5000 4000 4000 3000 3000 3000

500 500 500 500 500 500 500 500

4.0 3.0 2.5 2.0 2.0 1.5 1.5 1.5

2200 1650 1375 1100 1100 825 750 720

100 120

The following variants are available on request: Rockwool 160 SW: Stainless steel mesh and stitching wire Rockwool 160 S: Galvanised steel mesh and stainless steel stitching wire Rockwool 160 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool Rockwool 160 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool

Applications
Rockwool 160 is a lightly bonded rock wool mat stitched on galvanised wired mesh with galvanised wire. The wired mat is suitable for thermal and acoustic insulation of industrial pipe work, boiler walls, furnaces and industrial smoke exhaust ducts.

Advantages
Excellent thermal and acoustic insulation Suitable for use over irregular surfaces Available in a wide range of thickness up to 120 mm Suitable for use over stainless steel

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.039 100 0.268 100 0.047 200 0.310 150 0.055 300 0.373 200 0.065 400 0.453 250 0.076 500 0.552 300 0.091 600 0.670 EN 14706 ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 1609 ASTM C1104/C1104M EN 12667, ASTM C177 Standard

600C (1112F) 750C (1382F) Non-combustible A0 A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 < 10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m Water vapour absorption (vapor sorption) 0.02%vol 70 kg/m3 (4.37 lb/ft3) = 1.3 Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, at walls and equipment Standard specication for mineral bre blanket insulation, type I and II
2

Reaction to re

Water leachable chloride content

Water absorption Nominal density Water vapour resistance factor Compliance

26

EN 12086 CINI 2.2.02 ASTM C592-06

3.1 Insulation products

Installation guidelines
Assembly Cut the wired mat to length, so that the mat ts the pipe with slight pre-stressing. The closing joints must be staggered at an angle of at least 30 degrees to each other. The closing joints of the mats (lengthwise and circular) must be wired together using steel wire (min. 0.5 mm) or secured with mat hooks. Stainless steel pipes and pipes with a temperature of > 350C should preferably be insulated with Rockwool 160 SW, in which both the mesh and the stitching wire is stainless steel. If the mats are assembled in multiple layers, both the lengthwise and circular joints must be staggered (masonry bond). Support construction Given the limited pressure resistance of wired mats, in most cases a support is required for the board cladding. As a guideline, assume that a support is required every 3 to 4 metres. Finishing The insulation should be nished with a metal (e.g. aluminium) cladding. Where necessary, expansion joints are provided to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8/metre. Close the expansion joints with a steel tensioning wire. Connections to mountings, head and end caps, etc. should be made watertight using a suitable sealant.

Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish.

27

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool 164
Thickness in mm Length in mm Width in mm Packaging m2/ roll

Wired mat
m2 per 40ft HC container

30 40 50 60 75 80
Shrink-wrapped

8000 6000 5000 4000 4000 3000 3000 3000

500 500 500 500 500 500 500 500

4.0 3.0 2.5 2.0 2.0 1.5 1.5 1.5

2200 1650 1375 1100 1100 825 750 720

100 120

The following variants are available on request: Rockwool 164 SW: Stainless steel mesh and stitching wire Rockwool 164 S: Galvanised steel mesh and stainless steel stitching wire Rockwool 164 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool Rockwool 164 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool

Applications
Rockwool 164 is a lightly bonded stone wool mat stitched on galvanised wire mesh using galvanised wire. The wired mat is suitable for thermal and acoustic insulation of industrial applications reaching high temperatures, such as industrial pipe work, boiler walls, furnaces and smoke ducts.

Advantages
Excellent thermal and acoustic insulation Suitable for use over irregular surfaces Available in a wide range of thicknesses up to 120 mm Suitable for use over stainless steel

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.041 100 0.269 100 0.047 200 0.308 150 0.054 300 0.366 200 0.064 400 0.442 250 0.075 500 0.538 300 0.088 600 0.653 EN 14706 ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 1609 ASTM C1104/C1104M EN 12667, ASTM C177 Standard

640C (1184F) 750C (1382F) Non-combustible A0 A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 < 10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m Water vapour absorption (vapor sorption) 0.02%vol 80 kg/m3 (5 lb/ft3) = 1.3 Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, at walls and equipment Standard specication for mineral bre blanket insulation, type I and II
2

Reaction to re

Water leachable chloride content

Water absorption Nominal density Water vapour resistance factor Compliance

28

EN 12086 CINI 2.2.02 ASTM C592-06

3.1 Insulation products

Installation guidelines
Assembly Cut the wired mat to length, so that the mat ts the pipe with slight pre-stressing. The closing joints must be staggered at an angle of at least 30 degrees to each other. The closing joints of the mats (lengthwise and circular) must be wired together using steel wire (min. 0.5 mm) or secured with mat hooks. Stainless steel pipes and pipes with a temperature of > 350C should preferably be insulated with Rockwool 164 SW, in which both the mesh and the stitching wire is stainless steel. If the mats are assembled in multiple layers, both the lengthwise and circular joints must be staggered (masonry bond). Support construction Given the limited pressure resistance of wired mats, in most cases a support is required for the board cladding. As a guideline, assume that a support is required every 3 to 4 metres. Finishing The insulation should be nished with a metal (e.g. aluminium) cladding. Where necessary, expansion joints are provided to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8/metre. Close the expansion joints with a steel tensioning wire. Connections to mountings, head and end caps etc. should be made watertight using a suitable sealant.

Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish.

29

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool 159
Thickness in mm Length in mm Width in mm Packaging m2/roll

Wired mat
m2 per 40ft HC container

30 40 50 60 75 80 100
Shrink-wrapped

8000 6000 2500 4000 4000 3000 3000 3000

500 500 500 500 500 500 500 500

4.0 3.0 2.5 2.0 2.0 1.5 1.5 1.5

2200 1650 1375 1100 934 825 750 720

120

The following variants are available on request: Rockwool 159 SW: Stainless steel mesh and stitching wire Rockwool 159 S: Galvanised steel mesh and stainless steel stitching wire Rockwool 159 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool Rockwool 159 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool

Applications
Rockwool 159 is a lightly bonded heavy stone wool mat stitched on galvanised wired mesh with galvanised wire. The wired mat is especially suitable for industrial installations such as high-pressure steam pipes, reactors, furnaces, etc. where high demands are made on the temperature resistance of the insulation.

Advantages
Excellent thermal and acoustic insulation Suitable for use over irregular surfaces Available in a wide range of thicknesses up to 120 mm Suitable for use over stainless steel

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.040 100 0.273 100 0.046 200 0.301 150 0.052 300 0.349 200 0.060 400 0.413 250 0.069 500 0.497 300 0.081 600 0.600 EN 14706 ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 1609 ASTM C1104/C1104M EN 12667, ASTM C177 Standard

680C (1256F) 750C (1382F) Non-combustible A0 A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 < 10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol 100 kg/m3 (6.24 lb/ft3) = 1.3 Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, at walls and equipment Standard specication for mineral bre blanket insulation, type I and II

Reaction to re

Water leachable chloride content

Water absorption Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.02 ASTM C592-06

30

3.1 Insulation products

Installation guidelines Rockwool 159

Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish. Assembly Cut the wired mat to length, so that the mat ts the pipe with slight pre-stressing. The closing joints must be staggered at an angle of at least 30 degrees to each other. The closing joints of the mats (lengthwise and circular joints) must be wired together using e.g. steel wire min. 0,5 mm or secured with mat hooks. Stainless steel pipes and pipes with a temperature of > 350C should preferably be insulated with Rockwool 159 SW, in which both the mesh and the stitching wire is in stainless steel. If the mats are assembled in multiple layers, both the lengthwise and circular joints must be staggered (masonry bond). Support construction Given the limited pressure resistance of wired mats, in most cases a support is required for the board cladding. As a guideline, assume that a support is required every 3 to 4 metres. Finishing The insulation should be nished with a metal (e.g. aluminium) cladding. Where necessary, expansion joints are provided to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8/metre. Close the expansion joints with a steel tensioning wire. Connections to mountings, head and end caps, etc. should be made watertight using a suitable sealant.

31

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool 168
Thickness in mm Length in mm Width in mm Packaging m2/roll

Wired mat
m2 per 40ft HC container

30 40 50 60 75 80
Shrink-wrapped

8000 6000 5000 4000 4000 3000 3000

500 500 500 500 500 500 500

4.0 3.0 2.5 2.0 2.0 1.5 1.5

2200 1650 1375 1100 934 825 750

100

The following variants are available on request: Rockwool 168 SW: Stainless steel mesh and stitching wire Rockwool 168 S: Galvanised steel mesh and stainless steel stitching wire Rockwool 168 ALU: Galvanised steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool Rockwool 168 SW ALU: Stainless steel mesh and stitching wire with addition of aluminium foil between mesh and rock wool

Advantages Applications
Rockwool 168 is a lightly bonded heavy stone wool mat stitched on galvanised wired mesh with galvanised wire. The wired mat is especially suitable for industrial installations where high temperature and vibration resistance is required. Excellent thermal and acoustical insulation Suitable for use over irregular surfaces Available in a wide range of thicknesses up to 120 mm Suitable for use over stainless steel

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.041 100 0.284 100 0.044 200 0.305 150 0.050 300 0.347 200 0.057 400 0.402 250 0.066 500 0.471 300 0.077 600 0.561 EN 14706 ASTM C411 NEN 6064 NBN S21-203 DIN 4102-1 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 1609 ASTM C1104/C1104M EN 12667, ASTM C177 Standard

720C (1328F) 750C (1382F) Non-combustible A0 A1 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 < 10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m Water vapour absorption (vapor sorption) 0.02%vol 128 kg/m3 (8 lb/ft3) = 1.3 Rockwool (RW) wire mesh blankets for thermal insulation of large diameter pipes, at walls and equipment Standard specication for mineral bre blanket insulation, type I and II
2

Reaction to re

Water leachable chloride content

Water absorption Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.02 ASTM C592-06

32

3.1 Insulation products

Installation guidelines Rockwool 168

Assembly Cut the wired mat to length, so that the mat ts the pipe with slight pre-stressing. The closing joints must be staggered at an angle of at least 30 degrees to each other. The closing joints of the mats (lengthwise and circular joints) must be wired together using steel wire (min. 0.5 mm) or secured with mat hooks. Stainless steel pipes and pipes with a temperature of > 350C should preferably be insulated with Rockwool 168 SW, in which both the mesh and the stitching wire is in stainless steel. If the mats are assembled in multiple layers, both the lengthwise and circular joints must be staggered (masonry bond). Support construction Given the limited pressure resistance of wired mats, in most cases a support is required for the board cladding. As a guideline, assume that a support is required every 3 to 4 metres. Finishing The insulation should be nished with a metal (e.g. aluminium) cladding. Where necessary expansion joints are provided to cater for expansion of the pipes. Both the lengthwise and circular joints are fastened with sheet-metal screws: hard aluminium or stainless steel 1/2, 8/metre. Close the expansion joints with a steel tensioning wire. Connections to mountings, head and end caps, etc. should be made watertight using a suitable sealant.

Note: All steel components exposed to a corrosive environment should be cleaned, degreased and coated with a protective nish.

33

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool Flexiboard
Thickness in mm Length in mm Width in mm Packaging m / pack m2 per 40ft HC container

25 30 40 50 60 70
Boards are shrinkwrapped

1000 1000 1000 1000 1000 1000 1000 1000 1000

600 600 600 600 600 600 600 600 600

14.4 12.0 9.0 7.2 6.0 3.6 4.8 3.6 3.6

2419 2016 1512 1210 1008 907 806 756 605

75 80 100

Available on request with a one-sided facing of breglass reinforced aluminium foil (Alu) or glass tissue

Applications
Rockwool Flexiboard is a strong but exible stone wool board for the thermal and acoustic insulation of horizontal and vertical walls or acoustic panels.

Advantages
Excellent thermal and acoustic insulation Flexible application

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (oF) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.041 100 0.273 300C (572F) 450C (662F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 40 kg/m3 (2.5 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA EN 12086 CINI 2.2.01 ASTM C612-04 100 0.054 200 0.355 150 0.066 300 0.466 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 12667 ASTM C177 Standard

Reaction to re

Water absorption

EN 1609 ASTM C1104/C1104M ASTM C795

Water leachable chloride content Nominal density Water vapour resistance factor Compliance

Installation guidelines
Mechanically x Rockwool Flexiboard using self-adhesive or welded pins. In the case of aluminium foil facing, nish lengthwise and crosswise joints with a self-adhesive aluminium tape
34

(75 mm). When insulating objects colder than the ambient temperature, where there is a risk of condensation, the insulation should be provided with a vapour barrier. For external applications, the insulation should be nished with a metal, (e.g. aluminium) watertight covering.

3.1 Insulation products

Rockwool Multiboard
Thickness in mm Length in mm

NEW
Width in mm Packaging m2 / pack m2 per 40ft HC container

40 50 60 70 75 80
Boards are shrinkwrapped

1000 1000 1000 1000 1000 1000 1000 1000

600 600 600 600 600 600 600 600

6.0 4.8 4.8 3.6 3.6 3.6 3.0 2.4

1620 1296 1008 907 756 756 630 648

90 100

Available on request with a one-sided facing of breglass reinforced aluminium foil (Alu) on glass tissue

Applications
Rockwool Multiboard is a strong and rigid board for the thermal and acoustic insulation of horizontal and vertical walls where a stable insulation product is required. For example, tank walls or acoustic panels.

Advantages
Excellent thermal and acoustic insulation Rigid product combined with aluminium foil or breglass coating provides a smart, smooth surface nish

Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.039 100 0.268 100 0.048 200 0.317 150 0.058 300 0.396

Standard

EN 12667, ASTM C177

350C (662F) 450C (842F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 55 kg/m3 (3.44 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA and IB

EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795

Reaction to re

Water absorption Water leachable chloride content Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-04

Installation guidelines
Mechanically x Rockwool Multiboard using self-adhesive or welded pins. Due to the rigidity of the product, it can also be mounted in cassettes. In the case of aluminium foil facing, nish lengthwise and crosswise joints with a self-adhesive aluminium tape (75 mm). When insulating objects colder than the ambient temperature, where there is a risk of condensation, the insulation should be provided with a vapour barrier. The insulation should be nished with a metal (e.g. Aluminium), watertight covering.

35

INSULATION FOR INDUSTRY

Product properties

by

Lapinus

3.1 Insulation products

Rockwool HT600
Thickness in mm Length in mm Width in mm Packaging m2/pack

High temperature board

m2 per 40ft HC container

25 30 40 50 60 80
Boards are shrinkwrapped

1000 1000 1000 1000 1000 1000 1000 1000

600 600 600 600 600 600 600 600

9.6 6.0 6.0 4.8 3.0 3.0 2.4 1.8

2592 2016 1620 1296 1008 810 648 529

100 120

Applications
Rockwool HT600 is a strong, rigid board, specially developed for the thermal and acoustic insulation of boilers, columns and high-temperature (exhaust) ducts.

Advantages
Excellent thermal and acoustic insulation Suitable for high temperature applications Retains shape Long lasting Rapid return on investment

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.038 100 0.260 100 0.044 200 0.297 150 0.052 300 0.355 200 0.062 400 0.433 250 0.074 500 0.534 300 0.088 600 0.657 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795 EN 12667, ASTM C177 Standard

600C (1112F) 750C (1382F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 80 kg/m3 (5 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA, IB, II, III, IVA, IVB

Reaction to re

Water absorption Water leachable chloride content Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-04

36

3.1 Insulation products

Rockwool HT660
Thickness in mm Length in mm Width in mm Packaging m2 / pack

High temperature board

m2 / per 40ft HC container

30 40 50 60 80

1000 1000 1000 1000 1000

600 600 600 600 600

6.0 4.8 3.6 3.0 1.8

2016 1210 1210 1008 832

Boards are shrinkwrapped

Applications
Rockwool HT660 is a strong, rigid board for the thermal and acoustic insulation of constructions where higher temperatures and light mechanical loads (e.g. vibrations) occur.

Advantages
Excellent thermal and acoustic insulation Suitable for high temperature applications Retains shape Long lasting Rapid return on investment

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.038 100 0.259 100 0.043 200 0.291 150 0.049 300 0.34 200 0.058 400 0.402 250 0.067 500 0.481 300 0.078 600 0.576 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795 EN 826 EN 12667 ASTM C177 Standard

660C (1220 F) 750C (1382 F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 15 kPA at 10% deformation 115 kg/m3 (7.18 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA, IB, II, III, IVA, IVB

Reaction to re

Water absorption Water leachable chloride content Compression resistance Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-06

37

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool HT700
Thickness in mm Length in mm Width in mm Packaging m2 / pack

High temperature board

m2 / per 40ft HC container

30 40 50 60

1000 1000 1000 1000

600 600 600 600

3.6 3.0 2.4 1.8

2117 1638 1310 1058

Applications
Rockwool HT700 is a strong, rigid board for the thermal and acoustic insulation of constructions where higher temperatures and/or mechanical loads (e.g. vibrations) occur.

Advantages
Excellent thermal and acoustic insulation Suitable for high temperature applications Retains shape Long lasting Rapid return on investment

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) 50 0.039 100 100 0.044 200 0.298 150 0.050 300 0.342 200 0.057 400 0.398 250 0.065 500 0.467 300 0.075 600 0.548 350 0.087 700 0.641 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795 EN 826 EN 12667, ASTM C177 Standard

(BTU.in/ft2.h.F) 0.267 Maximum Service Temperature

700C (1292F) 750C (1382F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 40 kPA at 10% deformation 145 kg/m3 (9.05 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA, IB, II, III, IVA, IVB

Reaction to re

Water absorption Water leachable chloride content Compression resistance Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-04

38

3.1 Products isolants

Rockwool CRS
Thickness mm Length mm

NEW
Width mm

Compression resistant slab

Packaging m2/pack m2 per 40ft HC container

40 50 60 80 100

1000 1000 1000 1000 1000

600 600 600 600 600

3.0 2.4 2.4 1.8 1.8

1638 1310 1109 832 655

Shrink-wrapped

Applications
Rockwool Compression Resistant Slab(CRS) is a rigid, pressure-resistant stone wool insulation slab with high resistance to mechanical loads (e.g. foot trafc). The Compression Resistant Slab is developed for the thermal insulation of tank roofs subject to pedestrian trafc, and the thermal/acoustic insulation of constructions subject to mechanical load.

Advantages
Excellent thermal and acoustic insulation Resistant to foot trafc Resistant to mechanical loads

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature Reaction to re 50 0.040 100 0.270 100 0.043 200 0.302 150 0.049 300 0.345 EN 14706, ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795 EN 826 EN 12667, ASTM C177 Standard

250C (482F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 60 kPa at 10% deformation 150 kg/m3 (9.05 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA, IB and II

Water absorption Water leachable chloride content Compression resistance Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-04

39

INSULATION FOR INDUSTRY

by

Lapinus

3.1 Insulation products

Rockwool 251
Thickness in mm Length in mm Width in mm Packaging m2 / pack

Industrial slab
m2 / per 40ft HC container

40 50 60 80 100

1000 1000 1000 1000 1000

600 600 600 600 600

2.4 1.8 1.8 1.2 1.2

1613 1285 1058 806 655

Shrink-wrapped

Applications
Rockwool 251 is a highly pressure resistant stone wool slab for the thermal and acoustic insulation of constructions where high temperatures and mechanical loads (e.g. vibrations) occur.

Advantages
Excellent thermal and acoustic insulation Resistant to high temperatures Resistant to mechanical loads

Product properties
Performance tm (C) Thermal conductivity (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.041 100 0.276 100 0.045 200 0.309 150 0.051 300 0.353 200 0.058 400 0.405 250 0.066 500 0.468 300 0.075 600 0.541 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 1609 ASTM C1104/C1104M ASTM C795 EN 826 EN 12667, ASTM C177 Standard

700C (1292F) 750C (1382F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 54 kPA at 10% deformation 175 kg/m3 (10.94 lb/ft3) = 1.3 Rockwool (RW) slabs for thermal insulation of equipment Standard specication for mineral bre block and board thermal insulation, type IA, IB, II, III, IVA

Reaction to re

Water absorption Water leachable chloride content Compression resistance Nominal density Water vapour resistance factor Compliance

EN 12086 CINI 2.2.01 ASTM C612-04

40

3.1 Insulation products

Rockwool Loose Fill

Product Packaging kg/packaging kg per 40 ft HC Container

Rockwool Loose Fill (Rolls)

Bag

15

5250

Packed into bags

Applications
Rockwool Loose Fill is lightly bonded impregnated stone wool. This product is especially suitable for thermal insulation and acoustic insulation of joints and irregularly formed constructions.

Advantages
Excellent thermal and acoustic insulation Flexible application

Product properties
Performance tm (C) Thermal conductivity (stufng density 100 kg/m3) (W/mK) tm (F) (BTU.in/ft2.h.F) Maximum Service Temperature 50 0.040 100 0.276 100 0.049 200 0.338 150 0.057 300 0.393 200 0.067 400 0.462 250 0.075 500 0.517 300 0.091 600 0.628 EN 14706 ASTM C411 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 1609 ASTM C1104/C1104M Standard

680C (1256F) 750C (1382F) Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 <10mg/kg (ph-value neutral to slightly alkaline) Water absorption < 1 kg/m2 Water vapour absorption (vapor sorption) 0.02%vol Loose Rockwool for the thermal insulation of valve boxes and the specication stufng of insulation matresses

Reaction to re

Water leachable chloride content

Water absorption

Compliance

CINI 2.2.04

41

INSULATION FOR INDUSTRY

EN 12667, ASTM C177

by

Lapinus

3.1 Insulation products

Rockwool Granulate
Product Packaging kg/packaging

Granulate wool
kg per 40 ft HC Container

Rockwool Loose

Bag

20

12000

Lightly compressed and packed in bags

Applications
Rockwool Granulate is a stone wool granulate with no additives. The granulate is especially suitable for the thermal insulation of cold boxes and air separation plants.

Advantages
Non-combustible Chemically inert Easy to remove for inspection purposes Long lasting Short return on investment

Product properties
Performance tm (C) Thermal conductivity (Stufng density 100-200 kg/m3) (W/mK) tm (F) (BTU.in/ft2.h.F) 20 0.039 50 0.260 -20 0.033 0 0.229 -60 0.027 -50 0.201 -100 0.022 -150 0.153 -140 0.018 -250 0.115 -180 0.015 -300 0.101 NEN 6064 NBN S21-203 ASTM E84 (UL 723) EN 13468 ASTM C795 ASTM C871 EN 12667, ASTM C177 Standard

Reaction to re

Non-combustible A0 Surface burning characteristics: Flame spread=passed, Smoke development=passed < 10mg/kg, AS-quality for use over stainless steel Conforms to the stainless steel corrosion specication as per ASTM test methods C692 and C871 <10mg/kg (ph-value neutral to slightly alkaline)

Water leachable chloride content

Rockwool Granulate complies with AGI Q 118 insulation work for refrigeration on industrial installations; air separations plants

Installation guidelines
The guidelines for the use of granulate wool in cold applications are given in the AGI Q 118 standard. These guidelines are available on request. Please ask your RTI sales consultant.

42

4
Delivery and storage
Rockwool Technical Insulation can accept no liability for any faults in installation and deciencies. The respective terms of general sale and delivery of Rockwool Technical Insulation BV, lodged with the Commercial Court of Limburg North under number 13025533, and Rockwool Technical Insulation NV, was drafted in Brussels took effect on 1 August 2005 shall apply to all our offers and contracts. A copy of these conditions can be provided on request. All the values given in this publication are indicative average values, subject to manufacturing tolerances. Rockwool Technical Insulation retains the right to change product specications at any time without prior notice.

Delivery service
RTI strives to make all its products readily available. Delivery normally takes place from our dealers warehouses. However, direct delivery by RTI to the site of installation is also possible. To simplify construction site logistics, deliveries using containers can be arranged. Contact your dealer for more information.

Packaging and storage

Where our goods are supplied packed, packaging is included in the price. The polyethylene used in packaging is free of chlorine and sulphur compounds, and suitable for recycling. RTI products must be stored in the original packaging, protected from the weather and off the ground.

Advice
RTI offers more than just the rapid delivery of the right product. Rockwool can also act as your partner during the design phase to help to resolve technical problems, such as providing advice for complex technical insulation calculations, construction advice and help with drafting specications.

43

Contents Ductrock
1

Old product name

Isolatie van technische installaties in gebouwen
4

Insulation of technical installations in buildings

by

Lapinus

1.1 Pipe sections for heating & ventilation pipe work Rockwool 810 1.2 Thermal and acoustic insulation of heating & ventilation ducts Rockwool 133 Rockwool Alux NEW
2

4 6 6 7

1.1 Pijpschalen voor leidingen Rockwool 810 1.2 Thermische en akoestische isolatie van ventilatiekanalen Rockwool 133 Rockwool Alux

Conlit Fire Protection

2.1 Fire rating of wall and oor penetrations Conlit 150 U Conlit Penetration Board Conlit Fire Plug Conlit Fix Conlit Kit 2.2 Fire protection of heating & ventilation ducts Conlit Ductrock 2.3 Fire protection of steel structures Conlit Steelprotect Board Conlit Screw
3

NEW

NEW

8 8 10 11 12 13 14 14 16 16 17

Conlit brandwerende producten

2.1 Brandbescherming van leidingdoorvoeringen Conlit 150 U Conlit Penetration Board Conlit Fire Plug Conlit Fix Conlit Kit 2.2 Brandbescherming van ventilatiekanalen Conlit Ductrock 2.3 Brandbescherming van staalstructuren Conlit Screw

Insulation for industry

Application selector 3.1 Insulation products Rockwool 850 Rockwool 851 Rockwool Duraex Rockwool 160 Rockwool 164 Rockwool 159 Rockwool 168 Rockwool Flexiboard Rockwool Multiboard Rockwool HT600 Rockwool HT660 Rockwool HT700 Rockwool CRS Rockwool 251 Rockwool Loose Fill Rockwool Granulate
4

NEW

NEW

18 19 19 22 25 26 28 30 32 34 35 36 37 38 39 40 41 42

Isolatie voor de industrie

Applicatie selector 3.1 Isolatieproducten Rockwool 850

Rockwool 213 Rockwool 590 Rockwool 750 Rockwool 755

Rockwool 000 Rockwool 010.512

Delivery and storage

43

RTI, excellence in resafe solutions Rockwool Technical Insulation (RTI), a division of the international Rockwool Group, is the world wide market leader in technical insulation. Our experts offer you a complete range of techniques and systems for the resafe insulation of technical installations. In all segments of HVAC, process industry, ship building and passive re resistance, RTI stands for a total approach. From quality products to reliable expert advice, from documentation to delivery and after sales service. Throughout the whole chain from specier, through dealer to contractor and installer we aim to add value. We dont just sell products, we supply solutions. Its this total approach that makes RTI the ideal choice for professionalism, innovation and trust.

RTI/10.07/3.Okt/Exp 750

Want to know more about RTIs insulation solutions? Wed be delighted to help!

Rockwool and Conlit are registered trademarks of Rockwool International. Conlit Ductrock is a patented Rockwool International product. Rockwool Technical Insulation reserves the right to change the information in this brochure without prior notice.

by

Lapinus

Rockwool Technical Insulation bv Industrieweg 15 NL-6045 JG Roermond Tel. +31 (0) 475 35 33 88 Fax +31 (0) 475 35 36 40 e-mail [email protected] www.rockwool-rti.com