SMITH BEARING

P r o d u c t

C a t a l o g

Cam Followers, Needle Bearings, Bushings and Special Assemblies for Aerospace & Industrial Applications

SMITH BEARING is a registered trademark of

accurate bushing co.

Accuracy is Our Best Policy

SMITH BEARING i s

accurate bushing co.

a registered trademark of

CORPORATE HEADQUARTERS

443 North Avenue

Garwood NJ 07027 USA
tel: 908.789.1121
fax: 908.789.9429
800.932.0076

Smith Bearing is a registered trademark of Accurate Bushing Company. With over 50 years
experience in designing and manufacturing precision needle roller bearings, we can handle your
requirements for standard aerospace and industrial bearings, as well as custom manufactured
special bearings, assemblies, and bushings.
In this catalog you will find our complete range
of precision bearings including:
Cam Follower Needle Roller Bearings in Inch &
Metric sizes, Stainless Steel Cam Followers for
special corrosive applications, Cam Followers
with self-lubricating engineered plastic bushings,
Smith-Trax with tapered roller bearings and
deep-groove ball bearings for high-thrust load
applications, Aerospace and Military approved
Needle Roller Bearings for engine and airframe
applications, Spherical Plain Bearings, Drill Jig
Bushings and Specialty Aerospace products
and assemblies.
As well as our existing product line, we are ready to assist you with the manufacture of custom made
products, precision machine components and assemblies. ISO 9001 and AS 9100 registered.
Smith Bearing serves the global market place with a network of Industrial and Aerospace distributors,
manufacturing plants and sales offices throughout the world. The structure of our operation affords us the
ability to give highly personalized attention to every customer. Most importantly, this structure gives us the
ability to respond immediately to our customers request as well as providing highly cost-effective products.
Email: [email protected] Phone: 800.932.0076

Standard & Custom Bearings and Special Assemblies

for Aerospace & Industrial Applications

All products in this catalog subject to Accurate Bushing Company terms and conditions, a copy of which is available in the
back of this catalog or may be requested from the customer service department.
SMITH Bearing, SMITH-TRAX, & SMITH-ALIGN are registered trademarks of Accurate Bushing Company.
Copyright 2004 Accurate Bushing Company. All rights reserved.

SMITH BEARING i s

a registered trademark of

accurate bushing co.

Standard & Custom Bearings and Special Assemblies

for Aerospace & Industrial Applications

CORPORATE HEADQUARTERS
443 North Avenue
Garwood NJ 07027 USA
tel: 908.789.1121
fax: 908.789.9429
800.932.0076
www.smithbearing.com
www.accuratebushing.com

All products in this catalog subject to Accurate Bushing Company terms and conditions, a copy of which is available in
the back of this catalog or may be requested from the customer service department.

SMITH Bearing, SMITH-TRAX, & SMITH-ALIGN are registered trademarks of Accurate Bushing Company.
Copyright 2004 Accurate Bushing Company. All rights reserved.

Needle Bearings,
Bushings and Special
Assemblies for
Aerospace & Industrial
Applications

SMITH BEARING
is a registered trademark of ABC Accurate Bushing Company

CAM FOLLOWERS: (Needle Rollers) Yoke Type & Stud Type

We offer a complete line of stud type and yoke
type cam followers for industrial applications. These
bearings are available in steel, stainless steel, and
with engineered plastic internal bushings. We
specialize in engineered cam followers to fit
specific applications.

Inch Sizes
Metric Sizes
Stainless Steel
Bearings with
Non-Metallic Bushings

SMITH-TRAX Bearings
The SMITH-TRAX special duty track roller bearings
are machined from high-alloy steel and are casehardened for maximum longevity. These bearings
are fitted with deep-groove ball bearings or tapered
roller bearings to handle both high radial and thrust
load applications.

Inch Sizes
Metric Sizes
Stainless Steel

AEROSPACE BEARINGS
We are approved to manufacture bearings to military
and aerospace specifications. The bearings we
produce meet the standards of AS-3990. Our engine
bearings are currently used in thrust reversers, after
burners and divergent nozzles. Our airframe bearings
are used in flap-tracks, canopies and landing gear.

MS21438
MS21439
MS24465
MS24466

MS24461
MS21432
MS21447

CUSTOM ENGINEERED PRODUCTS & ANCILLARY BEARINGS

We will manufacture custom design bearings
in small and large quantities to meet your
specifications. Please contact our engineering
department with your requirements.

Inner Ring Races

Chain Rollers
Spherical Plain Bearings

DRILL JIG BUSHINGS

ABC Drill Jig Bushings are manufactured to ANSI standard
tolerances and produced from select steels known for their
long wear and stability. Special bushings are available.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

Table of Contents
CAPABILITIES & ENGINEERING

1-10

1 Rollers) Yoke Type & Stud Type

(Needle

SECTION 1: CAM FOLLOWERS:

11

Inch Sizes
CR
CR-X
CR-B
CR-XB

Inch
Inch
Inch
Inch

CR-XBE

Eccentric

HR
HR-X
HR-B
HR-XB

Inch
Inch
Inch
Inch

YR
YR-X

Inch Yoke Type Unsealed

Inch Yoke Type Sealed

Inch Sizes

Stud
Stud
Stud
Stud

Screwdriver Unsealed
Screwdriver Sealed
Hex-Drive Unsealed
Hex-Drive Sealed

Crowned & Uncrowned

Heavy
Heavy
Heavy
Heavy

Stud
Stud
Stud
Stud

Screwdriver Unsealed
Screwdriver Sealed
Hex -Drive Unsealed
Hex -Drive Sealed

Crowned

12
12
13
13
14-15
16
16
17
17
18
18
19

CR-C
CR-XC
CR-BC
CR-XBC

Inch
Inch
Inch
Inch

Stud
Stud
Stud
Stud

HR-C
HR-XC
HR-BC
HR-XBC

Inch
Inch
Inch
Inch

Heavy
Heavy
Heavy
Heavy

YR-C
YR-XC

Inch Size Yoke Type Unsealed Crowned

Inch Size Yoke Type Sealed Crowned

24

DCR
DYR

Double Row Heavy Roller Stud Type Interchange

Double Row Heavy Roller Yoke Type Interchange

26
27

Interchange Tables:

Inch Sizes

Type
Type
Type
Type

Type
Type
Type
Type

Stud
Stud
Stud
Stud

Screwdriver Unsealed Crowned

Screwdriver Sealed Crowned
Hex-Drive Unsealed Crowned
Hex-Drive Sealed Crowned

20
20
21
21

22
22
23
23

Screwdriver Unsealed Crowned

Screwdriver Sealed Crowned
Hex-Drive Unsealed Crowned
Hex-Drive Sealed Crowned

Cam Followers - INCH Sizes - Yoke Type & Stud Type Unsealed
Cam Followers - INCH Sizes - Yoke Type & Stud Type Sealed

28
29

Stainless Steel

CR-SS
CR-X-SS

Inch Stud Type Screwdriver Unsealed

Inch Stud Type Screwdriver Sealed

30

CR-B-SS
CR-XB-SS

Inch Stud Type Hex Drive Unsealed

Inch Stud Type Hex Drive Sealed

31

YR-SS
YR-X-SS

Inch Yoke Type Unsealed

Inch Yoke Type Sealed

32

Interchange Tables: Cam Followers - Stainless Steel

33

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

SMITH BEARING is a registered trademark of ABC Accurate Bushing Company

1
Inch Sizes

With Non-Metallic Bushing

BCR
BCR-X

Inch Stud Type Screwdriver Unsealed

Inch Stud Type Screwdriver Sealed

34

BCR-B
BCR-XB

Inch Stud Type Hex Drive Unsealed

Inch Stud Type Hex Drive Sealed

35

BYR
BYR-X

Inch Size Yoke Type Unsealed

Inch Size Yoke Type Sealed

36

Interchange Tables: Cam Followers - Non-Metallic Bushing

37

Metric
MCR
MCR-S
MCRV
MCRV-S

Metric
Metric
Metric
Metric

Stud
Stud
Stud
Stud

Type
Type
Type
Type

Unsealed Caged
Sealed Caged
Unsealed Full Complement
Sealed Full Complement

38-39

MYR
MYR-S
MYRV
MYRV-S

Metric
Metric
Metric
Metric

Yoke
Yoke
Yoke
Yoke

Type
Type
Type
Type

Unsealed Caged
Sealed Caged
Unsealed Full Complement
Sealed Full Complement

40

NUKR

Metric Yoke Double Row Heavy Roller Full Complement Interchange

41

MUTD

Metric Stud Double Row Heavy Roller Full Complement Interchange

42

Interchange Tables: Cam Followers - METRIC Sizes - Yoke Type & Stud Type

43

SECTION 2: SMITH-TRAX Bearings

Inch Sizes

SMITH-TRAX Bearings

44-45

PCR

Inch Plain Stud Type

46

FCR

Inch Flange Type

47

VCR

Inch V-Grooved Stud Type

48

UCR

Inch U-Grooved Stud Type

49

PYR

Inch Plain Yoke Type

50

FYR

Inch Flange Yoke Type

51

VYR

Inch V-Grooved Yoke Type

52

Metric

SMITH-TRAX Bearings

53

MPCR

Metric Plain Stud Type

54

MFCR

Metric Flange Type

55

MVCR

Metric V-Grooved Stud Type

56

MPYR

Metric Plain Yoke Type

57

MFYR

Metric Flange Yoke Type

58

MVYR

Metric V-Grooved Yoke Type

59

Interchange Tables: Inch & Metric Smith-Trax

www.smithbearing.com

60-61

tel. 800.932.0076 fax. 908.789.9429

Table of Contents

SMITH BEARING is a registered trademark of ABC Accurate Bushing Company

(continued)

SECTION 3: ANCILLARY BEARINGS

6262

IRR

Inner Ring Races Interchange

63

YR

Chain Rollers

64

GEZ

Spherical Plain Bearings

65

SECTION 4: AEROSPACE BEARINGS

General Information

MS21438/YAF

Airframe Needle Bearings Track Rollers - Single Row

68

MS21439/YAT

Airframe Needle Bearings Track Rollers - Double Row

68

MS24465/YAD

Airframe Needle Bearings Track Rollers - Single Row

69

MS24466/YAS

Airframe Needle Bearings Track Rollers - Double Row

69

MS24461/YAG

Airframe Needle Bearings - Single Row

MS21432/HRS

Airframe Needle Bearings Integral Stud

72

MS21447/CHRS

Airframe Needle Bearings Integral Stud - Crowned

73

70-71

Interchange Tables: Aerospace Bearings

74-75

SEB/SEBF Series

Spherical Slotted Entry Bearings

76-77

F Series

Spherical Smith-Align Bearings

SECTION 5: DRILL JIG BUSHINGS

General Information

Fractional Chart

78
81
80

Type P

Headless Press-Fit

82-83

Type H

Head Press-Fit

84-85

Type F

Fixed Renewable

86-87

Type SF

Slip-Fixed Renewable

88-89

Type L

Headless Liner

90

Type HL

Head Liner

91

Miscellaneous Hardware

92

SECTION 7: INTERCHANGE TABLES

93-103

Cam Followers (Needle Rollers) Yoke & Stud Type Inch & Metric

94-99

Smith-Trax

100-101

Aerospace

102-103

Blank Note Pages

104-107
108

Terms & Conditions

66-67

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

E N G I N E E R I N G

C A P A B I L I T I E S

MACHINERY & TESTING FACILITIES

Smith Bearing has a fully-integrated
manufacturing facility capable of producing
high-precision needle roller bearings for both the
Aerospace and Industrial market. Our computerized
(CNC) grinding and precision machining centers,
considered to be the most advanced in the industry
are capable of manufacturing a wide range of
products to exacting tolerances in order to meet
the needs of our customers. Our advanced
metallurgical department routinely verifies and
tests all raw materials, plating and heat-treating
processes used in the manufacturing of our
products. This careful analysis and scrutiny in
each phase of our procedure assures proper
conformance to all Aerospace requirements and
guarantees that only materials meeting our rigid
standards are used in Smith Bearing products.

ENGINEERING
Extensive experience in our engineering department
allows Smith Bearing to work closely with endusers and OEMS (original equipment manufactures)
in order to offer the best solution for their bearing
requirements. Smith Bearing engineers have
extensive knowledge of available metallurgies so
that they may offer customers their experience to
determine the best suitable material for a special
design and application. Smith manufactures
bearings in a wide range of materials including
high-carbon alloy steels, stainless steels, tool steels,
and other exotic alloys.

CUSTOM ASSEMBLIES
Smith Bearing has the ability to manufacture a
variety of custom bearing assemblies. Typically
this entails the precision machining of a bearing
housing and the assembly of needle or ball bearings
into the housing. By controlling the entire design
and manufacturing process of a custom order,
Smith Bearing guarantees the quality, performance, and delivery of an assembly. Smith Bearing
performs all aspects of such projects from design to
finish including the machining process, applications
of special coatings and plating, assembling and
testing of the final product.

QUALITY & DEPENDABILITY

Smith Bearing has received both ISO 9001
and AS 9100 quality registrations in recognition of
our continued commitment to world-class quality
control systems. Our quality system is recognized
by General Electric, Lockheed, Boeing Aircraft
Corporation, British Aerospace, as well as many
other military and aerospace companies. Our
Military bearings meet the requirements of
Mil-B-3990 (SAE AS 39901). This level of quality
certifications and approvals assures our customers
unequaled dependability of our products.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

1C

G E N E R A L

I N F O R M A T I O N

E N G I N E E R I N G

Cam Followers Stud & Yoke Type

SMITH Cam Followers are anti-friction needle

roller bearings developed for use in cam or
track roller applications. They were specifically
designed and built to handle intermittent
shock and heavy loads. Full compliment (noncaged) needle bearings maximize the radial
load carrying capability while the soft inner
core of the stud gives these cam followers the
ability to absorb extreme shock loads without
fracturing.
In addition to standard models, special
bearings are manufactured to customer
specification for unique applications.
It is often found that the use of special
bearings reduces machine costs and
improves performance. We have the ability
to economically manufacture custom
bearings in small or large volumes. Please
call us to discuss your special applications.

Material Selection
The common material selection for needle
roller bearings are high-strength bearing steel
(SAE 52100) or carburized low-carbon alloy
steels. These materials give us an excellent
combination of strength and economy and
are more than sufficient for the majority of
industrial applications.

Construction of Standard Needle Rollers

Cam Follower materials and finishes are selected to
provide a minimum of friction and to assure dependable
performance for the required service life.
OUTER RACE High-carbon chrome bearing steel (SAE 52100),
hardened and ground.
INNER RACES are manufactured from low-carbon alloy
steel, carburized, and case hardened on the raceway
area. This gives the inner race two very key characteristics.
1): Tremendous strength and forgiveness when subject to
tensile, shear, and other bending stresses and 2): extreme
hardness on the wear area for long bearing life. The studs
are metallurgically designed not to fracture or fail when
subject to intermittent shock and heavy loads found in
cam follower applications.
NEEDLE ROLLERS are made from high-carbon chrome
bearing steel. They are through-hardened, ground and
lapped for ultimate life and performance.
RETAINING WASHERS are made from low-carbon alloy steel,
and case-hardened. This gives both a hardened and smooth
internal surface that is desirable for proper cam follower
performance. The soft core of the end washer resists fracture
during use.

Various Needle Rollers - Stud & Yoke Type

High-Temperature & Corrosive Applications:

In extreme applications where bearings are

being subjected to high-temperature or
corrosive environments, alternative materials
or special platings must be considered.
Smith Bearing manufactures needle roller
bearings in a wide variety of high-temperature
and corrosive resistant exotic alloys including
440-C stainless steel and M-50, M-2, M-10
tool steels.
Corrosion resistant plating is effective when using
bearings in corrosive environments. Non-bearing
surfaces such as inner races and end washers
are cadmium plated to resist corrosion. The
outer races of the bearings are typically hardchrome plated to resist wear as well as corrosion.

REGULAR STUD TYPE CR Series

are recommended where loads and
shock are moderate. Bearing capacity on
the CR Series is limited by their moderately
sized stud. See capacity ratings.
HEAVY STUD TYPE HR Series
are recommended for applications with
high-loads and/or heavy shock and where
deflection should be held to a minimum.
Rollers and outer races are identical to the
standard CR Series.
YOKE TYPE YR Series
have similar internal construction to the stud
type CR Series except the inner race is made
for shaft or clevis mounting. Generally,
heavier loads can be supported by the yoke
mounting arrangement, since stud deflection
is removed from consideration.
HEX-DRIVE SOCKET Add Suffix B
are favorable for most applications
where the bearing is installed in a blind or
threaded hole. The Hex-drive allows for
more secure installation and easier removal
of the cam follower.
SCREWDRIVER SLOT Standard
Screw-driver slot configuration is normally
sufficient for most applications.

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

E N G I N E E R I N G

G E N E R A L

I N F O R M A T I O N

Cam Followers Stud & Yoke Type

ECCENTRIC CAM FOLLOWERS

Eccentric Sleeves Allow for Radial Location Adjustment of Cam Followers

Add Suffix E

Cam Followers with a Press Fit Eccentric

Sleeve provide correct alignment and
adjustment without costly preparation of
close tolerance mounting holes and
members. They eliminate problems of
clearances, preloading and wear
compensation and assure load sharing in
multiple cam follower applications. The
hex-drive socket allows positive torque for
locking and adjustment. A lock nut will
normally provide adequate clamping to
hold bearing and eccentric sleeve in their
proper position. When permanent locking of
eccentric sleeve is required, drill through the
housing, eccentric sleeve, and bearing stud
and secure with a dowel or set-screw.

The eccentric sleeve

allows for easy radial
positioning for stud-type
cam followers.

Eccentric
Sleeve

Control of Clearance and

Adjustment for Wear

In-line Adjustment Allows

Greater Location Tolerance
for Mounting Holes

CROWNED CAM FOLLOWERS

Crowned Outer Races Reduce Edge Loading when Bearing/Track are Misaligned

Add Suffix C

Unwanted edge loading of needle

bearings causes skewing and end
thrusting of the needles which contribute
to premature bearing failure. In situations
where it is impractical or too costly to
provide for perfect alignment, crowned
bearing O.D.s provide compensation for
misalignment between the cam follower
and the surface of a slanted track or cam.
The radius also eliminates skidding of the
outer race when bearing is on contact
with a flat, circular cam.

Crowned outer races are

recommended when the
track is not exactly aligned
and square with the cam
follower. Crowned outer
races reduce undesirable
thrust loads on the rollers
when track-bearing misalignment happens to occur.
This increases life and
reliability of the bearing.
Available in stud type and
yoke type cam followers.
SEALED CAM FOLLOWERS

Seals Provide Protection Against Contamination & Loss of Lubricant

Add Suffix X

Sealed cam followers are furnished with

molded-acetyl full-contact seals contained
within the outer race undercuts at both ends
of the bearing. This is a low-friction material
which keeps drag to a minimum yet is stable
and unaffected by corrosive agents or
lubricants. A small vent hole in the seals
allows for purging during relubrication without
causing seal displacement. The outer race on
sealed cam followers is provided with a
machined groove in the bore, which acts as
a grease reservoir to extend time periods
between relubrication. All sealed bearings
are dimensionally interchangeable with the
unsealed configuration of the same series.

Seals provide an effective

means of protection from
outside contamination and
ensure lubricant retention.
Available in stud type and yoke
type cam followers.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

Seal

Typical
Seal
Configuration

G E N E R A L

I N F O R M A T I O N

E N G I N E E R I N G

Cam Followers Stud & Yoke Type

Grease
Fitting

Lubrication

Fig. 1 shows the re-lubrication

path through the threaded-end of
the stud (white area). The head-end
is properly closed off using one of
the two the plugs provided with
each cam follower. Due to diameter
constraints of the stud, smaller cam
followers cannot be re-lubricated
though the threaded-end.

Plug

Cam Followers and Cam Yoke Rollers are

packed at the factory with a petroleum-base,
lithium grease with extreme pressure and
corrosive resistant additives. This lubricant is
suitable for most bearing applications within
a temperature range of -30 F to 250 F.
Re-lubrication in service can be accomplished
with any non-soap based roller bearing grease
or oil. Special greases or oils can be specified
if required.

Fig. 1 Lubrication Through Thread-End

Grease
Fitting

Frequency of lubrication will depend upon

the speed of bearing rotation, contaminants
present in the application and the type of
lubricant used. In continuously rotating
applications, constant oil lubrication or frequent
grease lubrication may be necessary.

Fig. 2 shows the re-lubrication

path through the head-end of the
stud (white area). The threaded-end
is properly closed off using one of
the two the plugs provided with
each cam follower.

Plug

Stud-Type Cam Followers can be

re-lubricated in three areas: through either end
of the stud (head-end or threaded-end) or
through the cross-drilled hole in the stud. The
four smallest size cam followers (CR-1/2, CR9/16, CR-5/8, CR-11/16) can be re-lubricated
through the head-end only due to the diameter
constraints of the stud. The axial lubrication hole
in the stud is linked to a radial hole in the
raceway of the bearing allowing the lubricant
to reach the needles. The ends of the stud are
counter-bored and precision-reamed to accept
a drive-type lubrication grease fitting (not
furnished). Two precision-machined plugs are
supplied with each cam follower and should be
pressed into the unused re-lubrication holes in
the end of the studs. The housing that the cam
follower is mounted into serves to block the
cross-drilled re-lubrication hole in the stud when
the re-lubrication hole is not being used.
(See Fig 1 & 2).

Note: Smaller cam followers with hex-drive

socket can only be re-lubricated through
threaded-end. See dimensional charts.

Fig. 2 Lubrication Through Head-End

Plug

Plug

Fig. 3 shows the re-lubrication

path through the cross-drilled hole
in the stud of the cam follower
(white area). A lubrication grease
fitting must be installed in the
housing of the equipment. In this
case, the threaded-end and headend are properly closed off using
both of the plugs provided with
each cam follower.

Yoke Rollers can be re-lubricated through the

oil holes that are drilled in the inner race of the
bearing. The mounting pin that supports the
bearing must be drilled so that lubrication hole
lines up with the oil hole in the bearing.

Grease
Fitting

Fig. 3 Lubrication Through Center-Hole

For grease relubrication of the Cam Follower CR Series and HR Series,

the following drive type fittings are suggested:

Cam Follower Size

Lubrication Fitting

CR1/2 to CR11/16
HR1/2 to HR5/8

1/8 Alemite Fitting

#3019

CR3/4 to CR23/4
HR3/4 to HR23/4

3/16 Alemite Fitting

#1728-B, #1633, #1645-B, #3005, #3006, #3009, #3012-BB

CR3 to CR4
HR3 to HR4

1/4 Alemite Fitting

#1743 or #1743-B

CR5 to CR6

1/4 N.P.T. fitting

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

E N G I N E E R I N G

G E N E R A L

I N F O R M A T I O N

Cam Followers Stud & Yoke Type

Mounting Stud-Type Cam Followers

Proper cam follower mounting requires a close

precision fit between the stud and housing bore.
We recommend using bore sizes provided in the
dimensional tables. An arbor press is the preferred
means of stud installation with pressure applied to
the central area of the stud, not to the outer
flange edges.
In positioning the cam follower, the end washer
should be firmly supported by the shoulder of the
machine member, which must be square with the
centerline of the stud. The shoulder should be at
least as large as the minimum boss diameter
given in the dimensional tables as denoted by
the E dimension (Fig. 4). It is also important that
the alignment be maintained between the
bearing axis and the cam or track surface to
prevent edge loading of the bearing outer race.
The dimensional tables list the recommended
torque to be applied to the nut. Excessive torque,
in particular with small sizes, may damage the
internal elements. Torque value for lubricated
threads should be reduced by half the value
given in the dimensional tables.

Fig. 4

Mounting of a Stud Type

Cam Follower

Mounting Yoke-Type Cam Followers

The mounting of yoke rollers should provide for
endwise clamping to prevent axial movement
and displacement of the end washer. The end
washer should be firmly supported by a flat
housing shoulder, which must be square with the
centerline of the bearing. The shoulder should
be at least as large as the minimum clamping
diameter shown in the dimensional tables as
denoted by the E dimension (Fig. 5) to provide
adequate washer support.

Fig. 5

Mounting of a Yoke Type

Cam Follower

Eccentric
Sleeve

The recommended shaft diameters listed in the

dimensional tables provide for either a slip or press
fit. In applications with extreme loads, the stud
should be heat-treated and press-fit into the
bearing bore. With moderate loads, a hardened
stud should be used but a slip-fit is sufficient. In
lightly loaded applications, a slip-fit may be
used with a non-hardened stud.

Fig. 6 Mounting of a Stud Type

Cam Follower with
Eccentric Sleeve

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

G E N E R A L

I N F O R M A T I O N

E N G I N E E R I N G

Bearing Life & Load Calculations

Bearing Life

Bearing Size and Selection

Properly selected bearings that have

been suitably mounted and lubricated
will operate for extended periods of time
with minimal wear until the fatigue life of
the rolling elements is reached. Fatigue
life of a bearing is reached when
"spalling" or flaking of the contact
surfaces (rolling element and raceway)
occur from repeated stresses. Once the
fatigue life of the rolling element or
raceway is reached, wear and ultimate
failure of the bearing will occur very
rapidly. The purpose is to select the
proper type and size of bearing for the
intended application in order to optimize
performance and operating life.

Once the type of bearing for a specific

application has been selected, the
designer must then choose the size of
bearing required for the application.
The larger the bearing the larger the
load it is capable of handling. The
Basic Dynamic Rating (BDR), or its
equivalent is an indication of how
much dynamic load a given bearing
size can handle. This rating is a reference
value only and is based on an L10 life
of 500 hours at a rotation speed of 331/3
RPM. In actual practice, the bearing
should never be subjected to more then
50% of this value. The Maximum Static
Capacity is the largest static load that
can be applied to the bearing before
the rolling elements become
permanently deformed. For stud type
cam followers, the maximum static
capacity is the largest static load that
can be applied before the stud will
bend or deform.

The life of a bearing can be defined in

terms of hours of operation or number of
revolutions the bearing will endure before
failure. We need to keep in mind that
some variations between individual
bearings that look identical do exist. The
most common definition of bearing life as
defined by the ABMA (American Bearing
Manufacturers Association) is referred to
as the L10 life. The L10 life of a bearing is
the number of hours that 90% of a group
of seemingly identical bearings will
operate prior to fatigue failure occurring.
The L10 life can also be expressed in the
number of revolutions when the speed is
known. When selecting a bearing the
machine designer should select an
appropriate L10 life for the particular
application.
Note: Larger bearings will have a longer
expected life than smaller bearings under
identical conditions. Heavier loads will
decrease the expected life of a bearing.
Therefore, to maximize operating life, the
largest bearing possible should be used.
See equations to right.

The life expectancy (L10 life) in hours of a bearing can be

calculated by using the following formula:

( )

L10 = 16,666 BDR

N
P

10/3

The Basic Dynamic Rating (BDR) required for

a given application can be calculated by using
following formula:
BDR = .054 x P x (L10 x N) .3

L10

= Life of the bearing in hours of operation

BDR = Basic Dynamic Rating of the bearing

P

= Radial Load (lbs)

= Speed (RPM)

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

E N G I N E E R I N G

G E N E R A L

I N F O R M A T I O N

Bearing Life & Load Calculations

Example 1:

Bearing Life Calculations using Speed Factor & Life Factor Charts

Determine the L10 life of a

cam
follower operating at a speed of 500 RPM
under a load of 750 lbs:
CR-7/8

Find the Basic Dynamic Rating (BDR)

in the specification page for the CR-7/8
cam follower:
BDR (Basic Dynamic Rating) = 2140 lbs
From the given formula:
L10 = 16,666 BDR
N
P
L10

An alternative method for determining the L10 life or the desired

Basic Dynamic Rating (BDR) required for a particular application is by using
the SPEED Factor and LIFE Factor charts. Use given formula below:
BDR = Applied Load x (SF) Speed Factor x (LF) Life Factor
Example 3:
Determine the Basic Dynamic Rating (BDR) for a bearing that will be
operating at 250 RPM with an applied load of 2000 lbs. The required
L10 life for the application is 600 hrs.
From the given formula above and using Speed and Life Charts below:

( )
= 16,666 (2140)
500
750

10/3

BDR = Applied Load x (SF) Speed Factor x (LF) Life Factor

BDR = 2000 x 1.83 x 1.064
BDR = 3895 lbs

10/3

L10 = 1098 hrs.

Note: This shows the expected operating life
for the CR-7/8 under the above conditions is
1098 hours. If a longer life span is desired
and room for installation permits, a larger
bearing with a higher Basic Dynamic Rating
(BDR) could be selected. For example: a
CR-11/4 cam follower with a BDR (Basic
Dynamic Rating) of 4470 lbs will operate for
12,794 hours in the identical application.

Example 2:
Determine the required Basic Dynamic
Rating (BDR) for a bearing that will be
operating at 1000 RPM with an applied
load of 400 lbs. The machine designer has
determines that the application requires
an L10 life of 15,000 hrs.
From the given formula:
BDR = .054 x P x (L10 x N) .3
BDR = .054 x 400 x (15,000 x 1,000) .3
BDR = 3071 lbs
Note: A CR-11/4cam follower with a
Basic Dynamic Rating (BDR) of 4470 lbs.
would be chosen for this application.
If A CR-1 cam follower with a Basic Dynamic
Rating (BDR) of 3030 lbs were used, the
operating life would be reduced to
14,226 hrs. See Example 1.

www.smithbearing.com

Speed Factors Chart

Life Factors Chart

RPM

SF

RPM

SF

L10 Life
(hrs)

LF

L10 Life
(hrs)

LF

331/3

1.000

1200

2.940

500

1.000

16,000

2.83

40

1.056

1300

3.000

600

1.064

18,000

2.93

50

1.120

1400

3.070

700

1.102

20,000

3.03

60

1.193

1500

3.125

800

1.151

25,000

3.24

70

1.249

1600

3.200

900

1.193

30,000

3.42

80

1.300

1700

3.250

1000

1.231

35,000

3.57

90

1.347

1800

3.310

1200

1.300

40,000

3.73

100

1.390

1900

3.365

1400

1.362

45,000

3.86

125

1.499

2000

3.420

1600

1.417

50,000

3.98

150

1.570

2100

3.460

1800

1.468

60,000

4.21

175

1.644

2200

3.520

2000

1.515

70,000

4.41

200

1.712

2400

3.610

2500

1.620

80,000

4.59

250

1.830

2600

3.700

3000

1.712

90,000

4.75

300

1.935

2800

3.780

3500

1.793

100,000

4.90

350

2.025

3000

3.860

4000

1.866

120,000

5.18

400

2.105

3200

3.930

4500

1.933

140,000

5.43

450

2.185

3400

4.010

5000

1.995

160,000

5.65

500

2.250

3600

4.070

6000

2.110

180,000

5.85

600

2.380

3800

4.150

7000

2.210

200,000

6.04

700

2.490

4000

4.210

8000

2.300

220,000

6.20

800

2.590

4200

4.270

9000

2.380

240,000

6.38

900

2.690

4400

4.330

10000

2.460

260,000

6.54

1000

2.780

4600

4.380

12000

2.600

280,000

6.68

1100

2.850

4800

4.440

14000

2.720

300,000

6.81

tel. 800.932.0076 fax. 908.789.9429

G E N E R A L

I N F O R M A T I O N

E N G I N E E R I N G

Shock Load

Table 1

The load ratings for bearings are based on smooth

and uniformly applied loads. When the load on the
bearing is such that shock or vibration is present the
bearing capacity must be increased. Use the load
classification chart to adjust the actual load to the
effective load that is seen by the bearing. The
actual bearing load should be multiplied by the
relevant factor when calculating bearing life or
when determining the required BDR (Basic
Dynamic Rating) for the application.

Load Classification Chart

Basic
Bearing Size
1/
2
9/
16
5/
8
11/
16
3/
4
7/
8

515
570
710
850
1050
1190

1560

Factor

11/8

1750

Uniform and Smooth

1.0

2425

Light Shock

1.5

Moderate Shock

2.0

Heavy Shock

3.0

11/4
13/8
11/2
15/8
13/4
17/8

Load Classification

Example:
If a bearing is subjected to a 600 lb load under
"moderate shock" conditions, a 1200 lb load
should be assumed for bearing selection
purposes.

Track Capacity
In normal applications cam followers and yoke
rollers operate against a track, cam or rail on a
piece of machinery or equipment. The Track
Capacity is the maximum load that a steel track
of a given tensile strength will withstand without
plastic deformation or brinelling of the track
surface when operating with a particular size
bearing. Track capacities increase with larger
bearings due to the increase in contact surface.
The following tables allow you to determine the
track capacities for steel tracks of various hardness
and tensile strengths when used with different size
cam followers and yoke rollers. When using
crowned bearings assume 80% of the value for
track capacities due to a decrease in contact
area between the track and bearing outer race.

2650
3475
3760
4640
4960

6725

21/4

7560

21/2
23/4

12560

9640

13750

31/4

14900

31/2

18800

20600

36400

52000

Table 2
Track
Tensile

Rockwell C
Hardness

Capacity
Factor

120,000

26

.45

To determine the Track Capacity for a particular

track of given hardness or tensile strength and
bearing size, multiply the Capacity Factor in
Table 2 by the Track Capacity in Table 1.

140,000

32

.61

160,000

36

.79

180,000

40

1.00

Example:

200,000

44

1.24

Track Hardness = 32 Rockwell "C"

220,000

47

1.50

11/2

240,000

50

1.78

Bearing Size =

To determine the Track Capacity multiply

the Capacity Factor in Table 2 by the
Track Capacity in Table 1.

Track Capacity= .61 x 3760 lbs. = 2282 lbs

Track Capacity
@ 180,000 P.S.I.

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

E N G I N E E R I N G

G E N E R A L

I N F O R M A T I O N

Hexagonal Wrench Sizes

Bearing Weights (lbs)

Bearing
Size

CR
Series

HR
Series

YR
Series

1/
2
9/
16
5/
8
11/
16
3/
4
7/
8

.03

.03

.04

.05

.05

.06

.08

.08

.06

.10

.10

.08

.17

.20

.15

11/8

.20

.24

.17

11/8

11/4

.32

.38

.24

11/4

13/8
11/2
15/8
13/4
17/8

.38

.44

.30

13/8

.55

.69

.41

11/2

Bearing Size

Hex
Wrench Size

1/
2
9/
16
5/
8
11/
16
3/
4
7/
8

4.00

4.56

3.10

31/4

4.50

5.19

3.62

31/4

31/2

6.42

7.01

4.95

31/2

9.46

10.83

7.05

1/
8
1/
8
1/
8
1/
8
3/
16
3/
16
1/
4
1/
4
1/
4
1/
4
5/
16
5/
16
5/
16
5/
16
7/
16
7/
16
1/
2
1/
2
5/
8
5/
8
5/
8
3/
4

19.60

14.34

32.75

20.25

.61

.75

.50

15/8

.88

1.00

.64

13/4

.97

1.38

.80

17/8

1.41

1.56

1.05

21/4

1.69

1.88

1.32

21/4

21/2

2.50

2.75

1.80

21/2

23/4

3.00

3.19

2.25

23/4

High Temperature Applications:

When using bearings at elevated temperatures the subsequent load ratings will be reduced.
Standard bearings manufactured from SAE-52100 Bearing Steel will lose 10% of there rating
when operating at 400 F. Smith Bearing specializes in manufacturing bearings from exotic
alloys designed for high-strength, corrosion-resistance or elevated temperatures. The
temperature chart below demonstrates the different specialty alloys that are available
and the effect that temperature has on the load rating.

Temperature Effect on % Load Rating (approx. percentages, ref. only)

Temperature F
400
500
600

MATERIALS

200

300

700

800

M-50 Tool Steel

100

100

97

96

96

95

90

M-2 Tool Steel

100

100

100

100

100

100

98

M-10 Tool Steel

100

100

100

100

100

100

97

440-C

100

95

90

86

80

72

60

SAE 52-100

100

97

90

75

50

25

15

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

G E N E R A L

I N F O R M A T I O N

E N G I N E E R I N G

TOLERANCE CHART for Metric Bearings

MCR-Series, MYR-Series, NUKR-Series, MUTD-Series
Cylindrical Roller Diameter D
TOLERANCE

SIZE
Over

Including

Maximum

Minimum

6 mm

18 mm

-0.008 mm

18 mm

30 mm

-0.009 mm

30 mm

50 mm

-0.010 mm

50 mm

80 mm

-0.013 mm

80 mm

120 mm

-0.015 mm

Crowned Roller Diameter D

TOLERANCE

SIZE
Over

Including

Maximum

Minimum

6 mm

120 mm

-0.050 mm

Stud Diameter d
TOLERANCE

SIZE
Over

Including

Maximum

Minimum

2 mm

6 mm

-0.012 mm

6 mm

10 mm

-0.015 mm

10 mm

18 mm

-0.018 mm

18 mm

30 mm

-0.021 mm

Bore Diameter d for Yoke Rollers

TOLERANCE

SIZE

10

Over

Including

Maximum

Minimum

2 mm

17 mm

-0.008 mm

17 mm

30 mm

-0.010 mm

30 mm

50 mm

-0.012 mm

50 mm

80 mm

-0.015 mm

80 mm

120 mm

-0.200 mm

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

S M I T H

B E A R I N G

Cam
Followers
INCH & METRIC SIZES
YOKE & STUD TYPE

Cam Followers & Yoke Rollers

Metric Cam Followers & Yoke Rollers
Cam Followers
with Non-metallic Self-lubricating
Engineered Plastic Bushing
Stainless Steel Cam Followers
Heavy Duty Double Row
Cam Followers

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

11

Cam Followers (Needle Rollers)

INCH SIZES
B

CR & CR-X
Regular Stud

M
1/32
S

Screwdriver Slot

D P

P A

Regular Stud with

Screw-Driver Slot
Sealed or Unsealed
X = Sealed

H
T
N

Dimensional Data (inches)

SEALED

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

CR1/2A

CR1/2-AX

.500

.344

CR1/2

CR1/2-X

.500

SMITH Bearing Number

UNSEALED

CR9/16

CR9/16-X

.5625

CR5/8A

CR5/8-AX

.625

CR5/8

CR5/8-X

.625

A
Stud
Dia.
+.001
-.000

CR3/4-X

.6875

CR3/4

CR3/4-X

.750

CR7/8

CR7/8-X

.875

CR1

CR1-X

1.000

CR11/8

CR11/8-X

1.125

CR11/4

CR11/4-X

1.250

CR13/8

CR13/8-X

1.375

CR11/2

CR11/2-X

1.500

CR15/8

CR15/8-X

1.625

CR13/4

CR13/4-X

1.750

CR17/8

CR17/8-X

1.875

CR2

CR2-X

2.000

CR21/4

CR21/4-X

2.250

CR21/2

CR21/2-X

2.500

CR23/4

CR23/4-X

2.750

CR3

CR3-X

3.000

CR31/4

CR31/4-X

3.250

CR31/2

CR31/2-X

CR4

CR4-X
CR5-XB

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Min.
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

Basic
Dynamic
Rating

Max.
Static
Capacity

(lbs-in)

(lbs)

(lbs)

.190
.375

5/8

.406

5/8
.250

870
1/4

1032

*1/8

19/64

.1900

20

720
970
1210

5/16

1/428

*1/8

23/64

.2500

50

3/4

1250
1320

.500

.375

7/8

3/8

3/824

1/4

3/32

3/16

1/2

.3750

120

2140

2260

.625

.4375

1/2

7/1620

1/4

3/32

3/16

5/8

.4375

350

3030

3100

.750

.500

11/4

5/8

1/220

5/16

3/32

3/16

3/4

.5000

500

4470

4300

.875

.625

11/2

3/4

5/818

3/8

3/32

3/16

57/64

.6250

1000

5560

5730

1.000

.750

13/4

7/8

3/416

7/16

3/32

3/16

13/64

.7500

2000

7870

7950

1.250

.875

7/814

1/2

5/32

3/16

113/64

.8750

2200

10370

10700

1.500

1.000

21/4

11/8

114

9/16

5/32

3/16

15/16

1.0000

3000

15280

16650

1.750

1.250

21/2

11/4

11/412

5/8

1/4

1/4

13/4

1.2500

5000

20200

25200

3.500

2.000

1.375

23/4

13/8

13/8-12

11/16

1/4

1/4

1.3750

6000

29660

31800

4.000

2.225

1.500

31/2

11/2

11/212

3/4

1/4

1/4

21/4

1.5000

7000

35980

45100

Available in Hex Hole Configuration only.

CR6-XB
* Relubricate through head end only.

12

Recom.
Torque

1/2

.4375
CR11/16

M
Stud
Length

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES
B

Cam Followers (Needle Rollers)

CR-B & CR-XB

Regular Stud

1/32

Hex-Drive Socket

HEX

Regular Stud
with Hex-Drive Socket
Sealed or Unsealed
X = Sealed

H
T
N
Dimensional Data (inches)

SMITH Bearing Number

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

HEX
Size

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Min Recom.
Boss. Bore
Dia. +.0005
-.0000

Recom. Basic
Max
Torque Dynamic Static
Rating Capacity
(lbs-in)

(lbs)

(lbs)

CR1/2-B

CR1/2-XB

.500

.375

.190

5/8

1/4

1032

1/8

19/64

.1900

20

970

720

CR5/8-B

CR5/8-XB

.625

.4375

.250

3/4

5/16

1/428

1/8

23/64

.2500

50

1320

1250

CR3/4-B

CR3/4-XB

.750
.500

.375

7/8

3/8

3/8 24

3/16

1/4

3/32

3/16

1/2

.3750

120

2140

2200

CR7/8-B

CR7/8-XB

.875

CR1-B

CR1-XB

1.000
.625

.4375

1/2

7/1620

1/4

1/4

3/32

3/16

5/8

.4375

350

3030

3100

CR11/8-B

CR11/8-XB

1.125

CR11/4-B

CR11/4-XB

1.250
.750

.500

1/220

1/4

5/16

3/32

3/16

3/4

.5000

500

4470

4300

CR13/8-XB

11/4

5/8

CR13/8-B

1.375

CR11/2-B

CR11/2-XB

1.500
.875

.625

5/818

5/16

3/8

3/32

3/16

57/64

.6250

1000

5560

5730

CR15/8-XB

11/2

3/4

CR15/8-B

1.625

CR13/4-B

CR13/4-XB

1.750
1.000

.750

3/416

5/16

7/16

3/32

3/16

13/64

.7500

2000

7870

7950

CR17/8-XB

13/4

7/8

CR17/8-B

1.875

CR2-B

CR2-XB

2.000
1.250

.875

7/814

7/16

1/2

5/32

2200

10370

10700

CR21/4-XB

3/16 113/64

.8750

CR21/4-B

2.250

CR21/2-B

CR21/2-XB

2.500
1.500

1.000

11/8

1/2

9/16

5/32

3/16

15/16

1.0000

3000

15280

16650

CR23/4-XB

21/4

1-14

CR23/4-B

2.750

CR3-B

CR3-XB

3.000
1.750

1.250

11/4

11/412

5/8

1/4

1/4

13/4

1.2500

5000

20200

25260

CR31/4-XB

21/2

5/8

CR31/4-B

3.250

CR31/2-B

CR31/2-XB

3.500

2.000

1.375

23/4

13/8

13/812

5/8

11/16

1/4

1/4

1.3750

6000

24660

31800

CR4-B

CR4-XB

4.000

2.250

1.500

31/2

11/2

11/212

3/4

3/4

1/4

1/4

21/4

1.5000

7000

35980

45100

CR5-XB

3.500

2.750

2.000

51/16

29/16

212

1/4

2.0000

7500

49750

56900

CR6-XB

4.000

3.250

2.500

21/212

1/4

31/2

2.5000

7500

71400

94000

Relubricate through threaded end only.

Cannot be relubricated.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

13

Cam Followers (Needle Rollers)

INCH SIZES

CR-XBE
Eccentric Stud

M
1/32
G

Hex-Drive Socket

P
E

Eccentric Stud
with Hex-Drive Socket
Sealed

HEX

X = Sealed

Dimensional Data (inches)

SEALED

D
Roller
O.D.
+ .000
.001

CR1/2-XBE

.500

.375

.250

.375

.010

5/8

1032

1/8

970

CR5/8-XBE

.625

.437

.375

.437

.015

3/4

1/428

1/8

1320

CR3/4-XBE

.750
.500

.500

.500

.030

7/8

3/824

3/16

3/16

2140

CR7/8-XBE

.875

CR1-XBE

1.000
.625

.625

.500

.030

7/1620

1/4

3/16

3030

CR11/8-XBE

1.125

CR11/4-XBE

1.250
.750

.687

.625

.030

11/4

1/220

1/4

3/16

4470

CR13/8-XBE

1.375

CR11/2-XBE

1.500
.875

.875

.750

.030

11/2

5/818

5/16

3/16

5560

CR15/8-XBE

1.625

CR13/4-XBE

1.750
1.000

1.000

.875

.030

13/4

3/416

5/16

3/16

7870

CR17/8-XBE

1.875

CR2-XBE

2.000
1.250

1.187

1.000

.030

7/814

7/16

3/16

10370

CR21/4-XBE

2.250

CR21/2-XBE

2.500
1.500

1.375

1.125

.030

21/4

114

1/2

3/16

15280

CR23/4-XBE

2.750

SMITH Bearing
Number

B
Roller
Width
+ .000
.005

A
Eccentric
Bushing
0.D.
+ .001

G
Eccentric
Bushing
Length
+ .000
.010

E
Eccentricity
+ .005

M
Stud
Length
Class
2A

T
Thread
U.N.F.

HEX
Size

P
Lube
Fitting

Basic
Dynamic
Rating
(lbs)

Relubricate through threaded end only.

Cannot be relubricated.

Housing thickness should be a minimum of .010 longer than bushing length to provide positive clamping.
NOTE: Also available in Screwdriver version.

Adjustment for More Precise Positioning of Cam Followers

Hex-drive socket Cam Followers with a press fit eccentric bushing sleeve
provide correct alignment and adjustment without costly preparation of
close tolerance mounting holes and members. They eliminate problems of
clearances, preloading and wear compensation and assure load sharing in
multiple cam follower applications. The Hex-drive socket allows positive torque
for locking and adjustment. A lock nut provides adequate clamping to hold
bearing in desired position in most applications. Where more positive positioning
or permanent locking is required, drill through the housing
into the bushing and stud for doweling or set-screw.

Control of Clearance and

Adjustment for Wear

In-line Adjustment Allows Greater Location

Tolerance for Mounting Holes

14

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

CR-XBEC
Crowned Eccentric Stud

B
1/32
G

Hex-Drive Socket

P
E
D

Eccentric Stud with

Crowned Outer Race
Hex-Drive Socket
Sealed
X = Sealed

HEX

T
R
Dimensional Data (inches)

SEALED

D
Roller
O.D.
+ .000
.001

B
Roller
Width
+ .000
.005

CR1/2-XBEC

.500

.375

CR5/8-XBEC

.625

CR3/4-XBEC

.750

CR7/8-XBEC

.875

CR1-XBEC

1.000

CR11/8-XBEC

1.125

CR11/4-XBEC

1.250

CR13/8-XBEC

1.375

CR11/2-XBEC

1.500

CR15/8-XBEC

1.625

CR13/4-XBEC

1.750

CR17/8-XBEC

1.875

CR2-XBEC

2.000

CR21/4-XBEC

2.250

CR21/2-XBEC

2.500

CR23/4-XBEC

2.750

SMITH Bearing
Number

A
Eccentric
Bushing
0.D.
+ .001

G
Eccentric
Bushing
Length
+ .000
.010

E
Eccentricity
+ .005

M
Stud
Length

T
Thread
U.N.F.
Class
2A

.250

.375

.010

5/8

1032

1/8

970

.4375

.375

.437

.015

3/4

1/428

1/8

1320

.500

.500

.500

.030

7/8

3/824

3/16

3/16

2140

10

.625

.625

.500

.030

7/1620

1/4

3/16

3030

12

.750

.687

.625

.030

11/4

1/220

1/4

3/16

4470

14

.875

.875

.750

.030

11/2

5/818

5/16

3/16

5560

20

1.000

1.000

.875

.030

13/4

3/416

5/16

3/16

7870

20

1.250

1.187

1.000

.030

7/814

7/16

3/16

10370

24

1.500

1.375

1.125

.030

21/4

114

1/2

3/16

15280

30

HEX
Size

P
Lube
Fitting
Size

Basic
Dynamic
Rating
(lbs)

R
Crown
Radius
(Inches)

Relubricate through threaded end only.

Cannot be relubricated.

Housing thickness should be a minimum of .010 longer than bushing length to provide positive clamping.
NOTE: Also available in Screwdriver version.

Adjustment for More Precise Positioning of Cam Followers

Hex-drive Socket Cam Followers with a press fit eccentric bushing sleeve
provide correct alignment and adjustment without costly preparation of
close tolerance mounting holes and members. They eliminate problems of
clearances, preloading and wear compensation and assure load sharing in
multiple cam follower applications. The Hex-drive socket allows positive
torque for locking and adjustment. A lock nut provides adequate clamping
to hold bearing in desired position in most applications. Where more positive
positioning or permanent locking is required, drill through the housing
into the bushing and stud for doweling or set-screw.

Control of Clearance and

Adjustment for Wear

In-line Adjustment Allows Greater Location

Tolerance for Mounting Holes

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

15

Cam Followers (Needle Rollers)

INCH SIZES

HR & HR-X
Heavy Stud

B
1/32

Screwdriver Slot
Heavy Stud with
Screw-Driver Slot
Sealed or Unsealed
X = Sealed

Dimensional Data (inches)

SMITH Bearing Number

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Min
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

Basic
Dynamic
Rating

Max
Static
Capacity

(lbs-in)

(lbs)

(lbs)

HR1/2

HR1/2-X

.500

.375

.250

5/8

1/4

1/428

*1/8

19/64

.2500

50

970

1590

HR5/8

HR5/8-X

.625

.437

.3125

3/4

5/16

5/1624

*1/8

23/64

.3125

75

1210

2500

HR3/4

HR3/4-X

.750
.500

.4375

7/8

3/8

7/1620

1/4

3/32

3/16

1/2

.4375

300

2140

4150

HR7/8

HR7/8-X

.875

HR1

HR1-X

1.000
.625

.625

1/2

5/818

1/4

3/32

3/16

3/4

.6250

500

2850

6200

HR11/8

HR11/8-X

1.125

HR11/4

HR11/4-X

1.250
.750

.750

3/416

5/16

3/32

3/16

7/8

.7500

1000

4060

8600

HR13/8-X

11/4

5/8

HR13/8

1.375

HR11/2

HR11/2-X

1.500
.875

.875

7/814

3/8

3/32

3/16

15/16

.8750

2000

5330

11300

HR15/8-X

11/2

3/4

HR15/8

1.625

HR13/4

HR13/4-X

1.750
1.000

1.000

114

7/16

3/32

3/16

13/32

1.0000

2500

7600

15870

HR17/8-X

13/4

7/8

HR17/8

1.875

HR2

HR2-X

2.000
1.250

1.125

5/32

3/16

17/32

1.1250

3000

10050

22000

HR21/4-X

11/812

1/2

HR21/4

2.250

HR21/2

HR21/2-X

2.500
1.500

1.250

11/8

11/412

5/32

3/16

15/16

1.2500

4000

15280

33000

HR23/4-X

21/4

9/16

HR23/4

2.750

HR3

HR3-X

3.000
1.750

1.500

11/4

11/212

5/32

1/4

13/4

1.5000

5000

20200

49900

HR31/4-X

21/2

5/8

HR31/4

3.250

HR31/2

HR31/2-X

3.500

2.000

1.750

23/4

13/8

13/412

11/16

5/32

1/4

115/16

1.7500

6000

29660

63300

HR4

HR4-X

4.000

2.250

2.000

31/2

11/2

212

3/4

5/32

1/4

21/4

2.0000

8000

35980

90000

* Relubricate through head end only.

16

Recom.
Torque

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

HR-B & HR-XB

Heavy Stud

M
1/32
S

Hex-Drive Socket

Heavy Stud
with Hex-Drive Socket
Sealed or Unsealed
X = Sealed

HEX
H

Dimensional Data (inches)

SMITH Bearing Number

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

HEX
Size

N
H
Oil Hole Oil Hole
Location Dia.

P
Lube
Fitting
Size

Min
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

Recom. Basic
Max
Torque Dynamic Static
Rating Capacity

UNSEALED

SEALED

HR1/2-B

HR1/2-XB

.500

.375

.250

5/8

1/4

1/428

1/8

19/64

.2500

50

970

1590

HR5/8-B

HR5/8-XB

.625

.437

.3125

3/4

5/16

5/16-24

1/8

23/64

.3125

75

1210

2500

HR3/4-B

HR3/4-XB

.750
.500

.4375

7/8

3/8

7/16 20

3/16

1/4

3/32

3/16

1/2

.4375

300

2140

4150

HR7/8-B

HR7/8-XB

.875

HR1-B

HR1-XB

1.000
.625

.625

1/2

5/818

1/4

1/4

3/32

3/16

3/4

.6250

500

2850

6200

HR11/8-B

HR11/8-XB

1.125

HR11/4-B

HR11/4-XB

1.250
.750

.750

11/4

5/8

3/416

1/4

5/16

3/32

3/16

7/8

.7500

1000

4060

8600

HR13/8-B

HR13/8-XB

1.375

HR11/2-B

HR11/2-XB

1.500
.875

.875

11/2

3/4

7/814

5/16

3/8

3/32

3/16

15/16

.8750

2000

5330

11300

HR15/8-B

HR15/8-XB

1.625

HR13/4-B

HR13/4-XB

1.750
1.000

1.000

13/4

7/8

114

5/16

7/16

3/32

3/16

13/32

1.0000

2500

7600

15870

HR17/8-B

HR17/8-XB

1.875

HR2-B

HR2-XB

2.000
1.250

1.125

11/812

7/16

1/2

5/32

3/16

17/32

1.1250

3000

10050

22000

HR21/4-B

HR21/4-XB

2.250

HR21/2-B

HR21/2-XB

2.500
1.500

1.250

21/4

11/8

11/412

1/2

9/16

5/32

3/16

15/16

1.2500

4000

15280

33000

HR23/4-B

HR23/4-XB

2.750

HR3-B

HR3-XB

3.000
1.750

1.500

21/2

11/4

11/212

5/8

5/8

5/32

1/4

13/4

1.5000

5000

20200

49900

HR31/4-B

HR31/4-XB

3.250

HR31/2-B

HR31/2-XB

3.500

2.000

1.750

23/4

13/8

13/412

5/8

11/16

5/32

1/4

115/16 1.7500

6000

29660

63300

2.000

31/2

11/2

8000

35980

90000

HR4-B

HR4-XB

4.000

2.250

212

3/4

3/4

5/32

1/4

21/4

2.0000

(lbs-in)

(lbs)

(lbs)

Relubricate through threaded end only.

Cannot be relubricated.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

17

Cam Followers (Needle Rollers)

INCH SIZES
W

YR & YR-X
Yoke Type

for Shaft Mounting

Sealed or Unsealed
X = Sealed

Dimensional Data (inches)

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

YR3/4

YR3/4-X

.750

YR7/8

YR7/8-X

.875

YR1

YR1-X

1.000

YR11/8

YR11/8-X

1.125

YR11/4

YR11/4-X

1.250

YR13/8

YR3/8-X

1.375

YR11/2

YR11/2-X

1.500

YR15/8

YR15/8-X

1.625

YR13/4

YR13/4-X

1.750

YR17/8

YR17/8-X

1.875

YR2

YR2-X

2.000

YR21/4

YR21/4-X

2.250

YR21/2

YR21/2-X

2.500

YR23/4

YR23/4-X

2.750

YR3

YR3-X

3.000

YR31/4

YR31/4-X

3.250

YR31/2

YR31/2-X

3.500

SMITH Bearing Number

YR4

18

A
Bore
Nominal

B
Roller
Width
+.000
-.005

W
Overall
Width
+.005
-.010

E
Min
Clamping
Dia.

.2500

.500

.5625

.3125

.625

.3750

Tolerance

Recommended Shaft Dia.

Slip Fit

Basic
Dynamic
Rating

Max
Static
Capacity

Min.

(lbs)

(lbs)

Press Fit

Max.

Min.

Max.

1/2

.2497

.2493

.2505

.2501

2140

4170

.6875

5/8

.3122

.3118

.3130

.3126

3030

6200

.750

.8125

3/4

.3747

.3743

.3755

.3751

4470

8600

.875

.9375

57/64

.4372

.4368

.4380

.4376

5560

11300

.5000

1.000

1.0625

13/64

.4997

.4993

.5007

.5003

7870

15870

.6250

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

10370

22000

.7500

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

15280

33000

1.0000

1.750

1.8125

13/4

.9996

.9992

1.0008

1.0003

20200

49900

2.000

2.0625

1.1246

1.1241

1.1258

1.1253

24660

63300

2.250

2.3125

21/4

1.2496

1.2491

1.2508

1.2503

35980

90000

+.0002
.4375

1.1250

.0004

+.0001
.0005

YR4-X

4.000

1.2500

YR5-X

5.000

1.7500

2.750

2.8750

1.7496

1.7491

1.7508

1.7503

49750

136000

YR6-X

6.000

2.2500

3.250

3.3750

31/2

2.2496

2.2491

2.2508

2.2503

71400

162000

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

S M I T H

B E A R I N G

Cam Followers (Needle Rollers)

Crowned
Cam
Followers
INCH SIZES
YOKE & STUD TYPE

CROWNED BEARINGS
Add Suffix C
are recommended where
the track or cam may impart
excessive thrust loading on
the bearing due to
misalignment.
Edge Loading of full complement needle bearings causes
skewing and end thrusting which contribute to premature
bearing failure. In situations where it is impractical or too costly
to provide for perfect alignment, crowned bearing O.D.s
provide compensation for misalignment between the cam
follower and the surface of a slanted track or cam. The radius
also eliminates skidding and thrusting typically found when the
bearing is on contact with a flat or circular cam. Bearing life
will be increased in those problem applications where
standard flat bearing surfaces have proven troublesome.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

19

Cam Followers (Needle Rollers)

INCH SIZES

CR-C & CR-XC

Crowned Regular Stud

M
1/32
S

Screwdriver Slot
P A

D P

Regular Stud
with Crowned Outer Race
Screw-Driver Slot
Sealed or Unsealed
X = Sealed

H
T

N
R

Dimensional Data (inches)

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

CR1/2A-C

CR1/2A-XC

.500

CR1/2-C

CR1/2-XC

.500

SMITH Bearing Number

CR9/16-C

CR9/16-XC

.5625

CR5/8A-C

CR5/8A-XC

.625

CR5/8-C

CR5/8-XC

.625

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

.3440

CR11/16-XC

.6875

CR3/4-C

CR3/4-XC

.750

CR7/8-C

CR7/8-XC

.875

CR1-C

CR1-XC

1.000

CR11/8-C

CR11/8-XC

1.125

CR11/4-C

CR11/4-XC

1.250

CR13/8-C

CR13/8-XC

1.375

CR11/2-C

CR11/2-XC

1.500

CR15/8-C

CR15/8-XC

1.625

CR13/4-C

CR13/4XC

1.750

CR17/8-C

CR17/8-XC

1.875

CR2-C

CR2-XC

2.000

CR21/4-C

CR21/4-XC

2.250

CR21/2-C

CR21/2-XC

2.500

CR23/4-C

CR23/4-XC

2.750

CR3-C

CR3-XC

3.000

CR31/4-C

CR31/4-XC

3.250

CR31/2-C

CR31/2-XC

CR4-C

CR4-XC

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Min. Recom.
Boss.
Bore
Dia. +.0005
-.0000

(lbs-in)

.190

(lbs)

870
1/4

1032

*1/8

19/64

.1900

20

.3750

5/8

970

.4060

5/8

1210

.250

(lbs)

5/16

1/428

*1/8

23/64

.2500

50

3/4

720

1250

1320

.5000

.375

7/8

3/8

3/824

1/4

3/32

3/16

1/2

.3750

120

2140

2200

10

.6250

.4375

1/2

7/1620

1/4

3/32

3/16

5/8

.4375

350

3030

3100

12

.7500

.500

1-1/4

5/8

1/220

5/16

3/32

3/16

3/4

.5000

500

4470

4300

14

.8750

.625

1-1/2

3/4

5/818

3/8

3/32

3/16

57/64

.6250

1000

5560

5730

20

1.0000

.750

13/4

7/8

3/416

7/16

3/32

3/16

13/64

.7500

2000

7870

7950

20

1.2500

.875

7/814

1/2

5/32

3/16

113/64

.8750

2200

10370

10700

24

1.5000

1.000

21/4

11/8

114

9/16

5/32

3/16

15/16 1.0000

3000

15280

16650

30

1.7500

1.250

21/2

11/4

11/412

5/8

1/4

1/4

13/4

1.2500

5000

20200

25200

30

3.500

2.0000

1.375

23/4

13/8

13/8-12

11/16

1/4

1/4

1.3750

6000

29660

31800

30

4.000

2.2500

1.500

31/2

11/2

11/212

3/4

1/4

1/4

21/4

1.5000

7000

35980

45100

30

CR5-XBC

Available only in Hex Hole Configuration.

CR6-XBC
* Relubricate through head end only.

20

R
Recom. Basic
Max
Crown
Torque Dynamic Static Radius
Rating Capacity (Inches)

1/2

.4375
CR11/16-C

M
Stud
Length

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

CR-BC & CR-XBC

Crowned Regular Stud

1/32
S

Hex-Drive Socket
D

P A
HEX
H
T

For Eccentric Sleeve Add Suffix E

Example: CR-XBEC. See Page 15.

Regular Stud
with Crowned Outer Race
Hex-Drive Socket
Sealed or Unsealed
X = Sealed

Dimensional Data (inches)

SEALED

D
Roller
O.D.
+.000
-.001

CR1/2-BC

CR1/2-XBC

.500

.3750

.190

5/8

1/4

1032

1/8

19/64

.1900

20

970

720

CR5/8-BC

CR5/8-XBC

.500

.4375

.250

3/4

5/16

1/428

1/8

23/64

.2500

50

1320

1250

CR3/4-BC

CR3/4-XBC

.750
.5000

.3750

7/8

3/8

3/8 24

3/16

1/4

3/32

3/16

1/2

.3750

120

2140

3200

10

CR7/8-BC

CR7/8-XBC

.875

CR1-BC

CR1-XBC

1.000
.6250

.4375

1/2

7/1620

1/4

1/4

3/32

3/16

5/8

.4375

350

3030

3100

12

CR11/8-BC

CR11/8-XBC

1.125

CR11/4-BC

CR11/4-XBC

1.250
.7500

.5000

1/220

1/4

5/16

3/32

3/16

3/4

.5000

500

4470

4300

14

CR13/8-XBC

11/4

5/8

CR13/8-BC

1.375

CR11/2-BC

CR11/2-XBC

1.500
.8750

.6250

5/818

5/16

3/8

3/32

3/16 57/64

.6250

1000

5560

5730

20

CR15/8-XBC

11/2

3/4

CR15/8-BC

1.625

CR13/4-BC

CR13/4-XBC

1.750
1.0000

.7500

3/416

5/16

7/16

3/32

3/16

13/64

.7500

2000

7870

7950

20

CR17/8-XBC

13/4

7/8

CR17/8-BC

1.875

CR2-BC

CR2-XBC

2.000
1.2500

.8750

7/814

7/16

1/2

5/32

2200

10370

10700

24

CR21/4-XBC

3/16 113/64

.8750

CR21/4-BC

2.250

CR21/2-BC

CR21/2-XBC

2.500
1.5000 1.0000

11/8

1/2

9/16

5/32

3/16

15/16 1.0000

3000

15280

16650

30

CR23/4-XBC

21/4

1-14

CR23/4-BC

2.750

CR3-BC

CR3-XBC

3.000
1.7500 1.2500

11/4

11/412

5/8

1/4

1/4

13/4

1.2500

5000

20200

25260

30

CR31/4-XBC

21/2

5/8

CR31/4-BC

3.250

CR31/2-BC

CR31/2-XBC

3.500

2.0000 1.3750

23/4

13/8

13/812

5/8

11/16

1/4

1/4

1.3750

6000

29660

31800

30

11/2

11/212

3/4

3/4

1/4

1/4

21/4

1.5000

7000

35980

45100

30

29/16

212

1/4

2.0000

7500

49750

56900

48

21/212

1/4

31/2

2.5000

7500

71400

94000

56

SMITH Bearing Number

UNSEALED

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
S
Stud
Eff.
Length Thread
Min.

CR4-BC

CR4-XBC

4.000

2.2500 1.5000

31/2

CR5-BC

CR5-XBC

5.000

2.7500 2.0000

51/16

CR6-BC

CR6-XBC

6.000

3.2500 2.2500

T
Thread
U.N.F.
Class
2A

HEX
Size

N
H
P
R
Oil Hole Oil Hole Lube Min Recom. Recom. Basic
Max Crown
Location Dia. Fitting Boss. Bore
Torque Dynamic Static Radius
Size Dia. +.0005
Rating Capacity (Inches)


-.0000 (lbs-in)
(lbs)
(lbs)

NPT
NPT

Relubricate through threaded end only.

Cannot be relubricated.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

21

Cam Followers (Needle Rollers)

INCH SIZES

HR-C & HR-XC

Crowned Heavy Stud

M
1/32
S

Screwdriver Slot
Heavy Stud
with Crowned Outer Race
Screw-Driver Slot
Sealed or Unsealed
X = Sealed

R
Dimensional Data (inches)

SMITH Bearing Number

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
T
Eff.
Thread
Thread U.N.F.
Min.
Class
2A

N
H
P
Oil Hole Oil Hole Lube
Location
Dia.
Fitting
Size

Min.
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

Recom. Basic
Torque Dynamic
Rating
(lbs-in)

(lbs)

HR1/2-C

HR1/2-XC

.500

.375

.250

5/8

1/4

1/428

*1/8

19/64

.2500

50

970

1590

HR5/8-C

HR5/8-XC

.625

.437

.3125

3/4

5/16

5/1624

*1/8

23/64

.3125

75

1210

2500

HR3/4-C

HR3/4-XC

.750
.500

.4375

7/8

3/8

7/1620

1/4

3/32

3/16

1/2

.4375

300

2140

4150

.625

.625

1/2

5/818

1/4

3/32

3/16

3/4

.6250

500

2850

6200

12

.750

.750

11/4

5/8

3/416

5/16

3/32

3/16

7/8

.7500

1000

4060

8690

14

.875

.875

11/2

3/4

7/814

3/8

3/32

3/16 15/16

.8750

2000

5330

11300

20

1.000

1.000

13/4

7/8

114

7/16

3/32

3/16

13/32

1.000

2500

7600

15870

20

1.250

1.125

11/812

1/2

5/32

3/16

17/32

1.1250

3000

10050

22000

24

1.500

1.250

21/4

11/8

11/412

9/16

5/32

3/16

15/16

1.2500

4000

15280

33000

30

1.750

1.500

21/2

11/4

11/212

5/8

5/32

1/4

13/4

1.5000

5000

20200

49900

30

10

HR7/8-C

HR7/8-XC

.875

HR1-C

HR1-XC

1.000

HR11/8-C

HR11/8-XC

1.125

HR11/4-C

HR11/4-XC

1.250

HR13/8-C

HR13/8-XC

1.375

HR11/2-C

HR11/2-XC

1.500

HR15/8-C

HR15/8-XC

1.625

HR13/4-C

HR13/4-XC

1.750

HR17/8-C

HR17/8-XC

1.875

HR2-C

HR2-XC

2.000

HR21/4-C

HR21/4-XC

2.250

HR21/2-C

HR21/2-XC

2.500

HR23/4-C

HR23/4-XC

2.750

HR3-C

HR3-XC

3.000

HR31/4-C

HR31/4-XC

3.250

HR31/2-C

HR31/2-XC

3.500

2.000

1.750

23/4

13/8

13/412

11/16

5/32

1/4

115/16

1.7500

6000

29660

63300

30

HR4-C

HR4-XC

4.000

2.250

2.000

31/2

11/2

212

3/4

5/32

1/4

21/4

2.0000

8000

35980

90000

30

* Cannot be relubricated through threaded end.

22

(lbs)

R
Max
Radius
Static Crown
Capacity (Inches)

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

HR-BC & HR-XBC

Crowned Heavy Stud

B
1/32

Hex-Drive Socket
D

Heavy Stud
with Crowned Outer Race
Hex-Drive Socket
Sealed or Unsealed
X = Sealed

HEX
H

Dimensional Data (inches)

SMITH Bearing Number

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
S
T
Stud
Eff.
Thread
Length Thread U.N.F.
Min.
Class
2A

HEX
Size

N
H
P
Oil Hole Oil Hole Lube
Location Dia. Fitting
Size

Min
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

R
Recom. Basic
Max
Crown
Torque Dynamic Static Radius
Rating Capacity (Inches)

UNSEALED

SEALED

HR1/2-BC

HR1/2-XBC

.500

.375

.2500

5/8

1/4

1/428

1/8

19/64

.2500

50

970

1590

HR5/8-BC

HR5/8-XBC

.625

.437

.3125

3/4

5/16

5/16-24

1/8

23/64

.3125

75

1210

2500

HR3/4-BC

HR3/4-XBC

.750
.500

.4375

7/8

3/8

7/16 20

3/16

1/4

3/32

3/16

1/2

.4375

300

2140

4150

10

HR7/8-BC

HR7/8-XBC

.875

HR1-BC

HR1-XBC

1.000
.625

.6250

1/2

5/818

1/4

1/4

3/32

3/16

3/4

.6250

500

2850

6200

12

.750

.7500

11/4

5/8

3/416

1/4

5/16

3/32

3/16

7/8

.7500

1000

4060

8600

14

.875

.8750

11/2

3/4

7/814

5/16

3/8

3/32

3/16

15/16

.8750

2000

5330

11300

20

1.000

1.0000

13/4

7/8

114

5/16

7/16

3/32

3/16

13/32

1.0000

2500

7600

15870

20

1.250

1.1250

11/812

7/16

1/2

5/32

3/16

17/32

1.1250

3000

10050

22000

24

1.500

1.2500

21/4

11/8

11/412

1/2

9/16

5/32

3/16

15/16

1.2500

4000

15280

33000

30

1.750

1.5000

21/2

11/4

11/212

5/8

5/8

5/32

1/4

13/4

1.5000

5000

20200

49900

30

HR11/8-BC HR11/8-XBC

1.125

HR11/4-BC HR11/4-XBC

1.250

HR13/8-BC HR13/8-XBC

1.375

HR11/2-BC HR11/2-XBC

1.500

HR15/8-BC HR15/8-XBC

1.625

HR13/4-BC HR13/4-XBC

1.750

HR17/8-BC HR17/8-XBC

1.875

HR2-BC

2.000

HR2-XBC

HR21/4-BC HR21/4-XBC

2.250

HR21/2-BC HR21/2-XBC

2.500

HR23/4-BC HR23/4-XBC

2.750

HR3-BC

3.000

HR3-XBC

(lbs-in)

(lbs)

(lbs)

HR31/4-BC HR31/4-XBC

3.250

HR31/2-BC HR31/2-XBC

3.500

2.000

1.7500

23/4

13/8

13/412

5/8

11/16

5/32

1/4

115/16

1.7500

6000

29660

63000

30

HR4-BC

4.000

2.250

2.0000

31/2

11/2

212

3/4

3/4

5/32

1/4

21/4

2.0000

8000

35980

90000

30

HR4-XBC

Relubricate through threaded end only.

Cannot be relubricated.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

23

Cam Followers (Needle Rollers)

INCH SIZES

W
B

YR-C & YR-XC

Crowned Yoke Type
Crowned Outer Race
for Shaft Mounting
Sealed or Unsealed
X = Sealed

Dimensional Data (inches)

SEALED

D
Roller
O.D.
+.000
-.001

YR3/4-C

YR3/4-XC

.750

YR7/8-C

YR7/8-XC

.875

YR1-C

YR1-XC

1.000

YR11/8-C

YR11/8-XC

1.125

YR11/4-C

YR11/4-XC

1.250

YR13/8-C

YR13/8-XC

1.375

YR11/2-C

YR11/2-XC

1.500

YR15/8-C

YR15/8-XC

1.625

YR13/4-C

YR13/4-XC

1.750

YR17/8-C

YR17/8-XC

1.875

YR2-C

YR2-XC

2.000

YR21/4-C

YR21/4-XC

2.250

YR21/2-C

YR21/2-XC

2.500

YR23/4-C

YR23/4-XC

2.750

YR3-C

YR3-XC

3.000

YR31/4-C

YR31/4-XC

3.250

YR31/2-C

YR31/2-XC

3.500

SMITH Bearing Number

UNSEALED

YR4-C

24

A
Bore
Nominal

B
Roller
Width
+.000
-.005

W
Overall
Width
+.005
-.010

E
Min
Clamping
Dia.

.2500

.500

.5625

.3125

.625

.3750

Tolerance

Recommended Shaft Dia.

Slip Fit

Press Fit

Basic
Dynamic
Rating

Max
Static
Capacity

(lbs)

(lbs)

R
Crown
Radius
(Inches)

Max.

Min.

Max.

Min.

1/2

.2497

.2493

.2505

.2501

2140

4170

10

.6875

5/8

.3122

3118

.3130

.3126

3030

6200

12

.750

.8125

3/4

.3747

.3743

.3755

.3751

44700

8600

14

.875

.9375

57/64

.4372

.4368

.4380

.4376

5560

11300

20

.5000

1.000

1.0625

13/64

.4997

.4993

.5007

.5003

7870

15870

20

.6250

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

10370

22000

24

.7500

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

15280

33000

30

1.0000

1.750

1.8125

13/4

.9996

.9992 1.0008 1.0003

202000

49900

30

2.000

2.0625

1.1246

1.1241 1.1258 1.1253

29660

63300

30

2.250

2.3125

21/4

1.2496

1.2491 1.2508 1.2503

35980

90000

30

+.0002
.4375

1.1250

.0004

+.0001
.0005

YR4-XC

4.000

1.2500

YR5-XC

5.000

1.7500

2.750

2.8750

1.7496

1.7491 1.7508 1.7503

49750

136000

48

YR6-XC

6.000

2.2500

3.250

3.3750

31/2

2.2496

2.2491 2.2508 2.2503

71400

162000

56

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

S M I T H

B E A R I N G

DCR Series
Stud Type

Cam Followers (Needle Rollers)

Heavy Duty
Rollers
Double Row
INCH

SIZES

YOKE & STUD TYPE

DYR Series
Yoke Type

The SMITH DCR & DYR Series

are Cam Followers with a
Double set of Heavy Rollers
and Thicker Outer Rings
for increased load handling
and extended life.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

25

Double Row
Needle Rollers

Cam Followers

INCH SIZES

DCR
Double Row Heavy Roller
Stud Type
Shielded Full Complement

B1

C
Hex

G1

Hex-Drive Socket
D

INTERCHANGE
SMITH

RBC

DCR-11/2

RBC-11/2

DCR-15/8
DCR-13/4
DCR-17/8
DCR-2
DCR-21/4
DCR-21/2
DCR-23/4
DCR-3
DCR-31/4
DCR-31/2
DCR-4
DCR-5
DCR-6

RBC-15/8
RBC-13/4
RBC-17/8
RBC-2
RBC-21/4
RBC-21/2
RBC-23/4
RBC-3
RBC-31/4
RBC-31/2
RBC-4
RBC-5
RBC-6

General Information
The SMITH DCR series is designed to meet higher performance requirements. Bearings are
provided with a double row of Heavy Duty Rollers, thicker outer ring and contact seals all
which provide a longer life. Consult our Engineering Department for special variations.
Bearings are dimensionally
interchangeable, however
internal design varies
between manufacturers.

Dimensional Data (inches)

SEALED

D
Roller
O.D.
+.000
-.001

C
Roller
Width
+.000
-.005

G1
Eff.
Thread
Min.

G
Thread
U.N.F.
Class
2A

Bearing
Dynamic
Capacity

Bearing
Static
Capacity

Max.
Allow
Load

Track
Capacity
at 40RC

Max.
Clamp
Torque

(lbs)

(lbs)

(lbs)

(lbs)

(lbs-ft)

DCR-11/2

1.500

.875

.625

1.500

.750

5/8-18

3/8

5,660

6,180

2,470

3,260

32

DCR-15/8

1.625

.875

.625

1.500

.750

5/8-18

3/8

5,660

6,180

2,890

3,530

32

DCR-13/4

1.750

1.000

.750

1.750

.875

3/4-16

3/8

8,400

10,800

3,200

4,460

62

DCR-17/8

1.875

1.000

.750

1.750

.875

3/4-16

3/8

8,400

10,800

3,910

4,750

62

DCR-2

2.000

1.250

.875

2.000

1.000

7/8-14

1/2

12,800

17,700

5,400

6,400

75

DCR-21/4

2.250

1.250

.875

2.000

1.000

7/8-14

1/2

12,800

17,700

6,800

7,200

75

DCR-21/2

2.500

1.500

1.000

2.250

1.125

1-14

9/16

17,300

20,800

9,000

9,200

108

DCR-23/4

2.750

1.500

1.000

2.250

1.125

1-14

9/16

17,300

20,800

10,800

10,200

108

DCR-3

3.000

1.750

1.250

2.500

1.250

11/4-12

5/8

29,700

40,200

14,700

13,100

166

DCR-31/4

3.250

1.750

1.250

2.500

1.250

11/4-12

5/8

29,700

40,200

17,500

14,100

166

DCR-31/2

3.500

2.000

1.375

2.750

1.375

13/8-12

5/8

37,000

49,500

21,000

17,000

208

DCR-4

4.000

2.250

1.500

3.500

1.500

11/2-12

3/4

46,700

58.800

23,400

21,600

250

DCR-5

5.000

2.750

2.000

5.062

1.563

2-12

72,400

98,400

43,300

34,420

250

DCR-6

6.000

3.250

2.500

6.000

3.000

21/2-12

93,800

160,000

59,500

50,500

250

SMITH Bearing
Number

d
Stud
Dia.
+.001
-.000

B1
Stud
Length

HEX
Size

1) Add suffix C for Crowned Outer Race. Example: DCR2-C.

2) Lubrication Holes available upon request.
3) Available Unsealed upon request.

26

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers

Double Row
Needle Rollers

DYR
Double Row Heavy Roller
Yoke Type
Shielded Full Complement

B
C

d d1

INTERCHANGE
SMITH

General Information
The SMITH DYR series is designed to meet higher performance requirements. Bearings are
provided with a double row of Heavy Duty Rollers, thicker outer ring and contact seals all
which provide a longer life. Consult our Engineering Department for special variations.
Bearings are dimensionally
interchangeable, however
internal design varies
between manufacturers.

RBC

DYR-11/2
DYR-15/8
DYR-13/4
DYR-17/8
DYR-2
DYR-21/4
DYR-21/2
DYR-23/4
DYR-3
DYR-31/4
DYR-31/2
DYR-4
DYR-5
DYR-6

RBY-11/2
RBY-15/8
RBY-13/4
RBY-17/8
RBY-2
RBY-21/4
RBY-21/2
RBY-2-3/4
RBY-3
RBY-31/4
RBY-31/2
RBY-4
RBY-5
RBY-6

Dimensional Data (inches)

d
Bore
Diameter

SEALED

D
Roller
O.D.
+.000
-.001

DYR-11/2

1.500

DYR-15/8
DYR-13/4

SMITH Bearing
Number

DYR-17/8

C
Roller
Width
+.000
-.005

B
Overall
Width
+ .005
-.010

d1
Shoulder
Diameter

.4375

.875

.9375

1.625

.4375

.875

1.750

.500

1.875

.500

Tolerance

+.0002
.0004

Bearing
Dynamic
Capacity
(lbs)

Bearing
Static
Capacity
(lbs)

Max
Allow.
Load
(lbs)

Track
Capacity
at 40 RC
(lbs)

.750

5,660

6,180

3,200

3,260

.9375

.750

5,660

6,180

3,420

3,530

1.000

1.0625

1.000

8,400

10,800

4,100

4,460

1.000

1.0625

1.000

8,400

10,800

5,480

4,750

1.250

1.3125

1.125

12,800

17,700

7,050

6,400

DYR-2

2.000

.625

DYR-21/4

2.250

.625

1.250

1.3125

1.125

12,800

17,700

10,980

7,200

DYR-21/2

2.500

.750

1.500

1.5625

1.250

17,300

20,800

13,300

9,200

DYR-23/4

2.750

.750

1.500

1.5625

1.250

17,300

20,800

17,200

10,200

DYR-3

3.000

1.000

1.750

1.8125

1.500

29,700

40,200

18,800

13,100

DYR-31/4

3.250

1.000

1.750

1.8125

1.500

29,700

40,200

26,200

14,100

2.000

2.0625

1.625

37,000

49,500

28,700

17,000

+.0001

DYR-31/2

3.500

DYR-4

4.000

1.250

2.250

2.3125

1.750

46,700

58,800

30,500

21,600

DYR-5

5.000

1.750

2.750

2.8750

2.250

72,400

98,400

56,600

34,420

DYR-6

6.000

2.250

3.250

3.3750

3.000

93,800

160,000

76,000

50,500

1.125

.0005

1) Add suffix C for Crowned Outer Race. Example: DYR2-C.

2) Lubrication Holes available upon request.
3) Available Unsealed upon request.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

27

Cam Followers (Needle Rollers) INCH SIZES

I N T E R C H A N G E

Unsealed

T A B L E S

Cam Followers

Heavy Stud Unsealed

Regular Stud Unsealed

SMITH
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR

1/2-A
1/2
9/16
5/8-A
5/8
11/16
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

McGill
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF

RBC

1/2-N
1/2
9/16
5/8-N
5/8
11/16
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Torrington

S 16
S 18

S 20
S 22
S 24
S 28
S 32
S 36
S 40
S 44
S 48
S 52
S 56
S 60
S 64
S 72
S 80
S 88
S 96
S 104
S 112
S 128
S 160
S 192

CR 8
CR 8-1

CR 10
CR 10-1

CR 12
CR 14
CR 16
CR 18
CR 20
CR 22
CR 24
CR 26
CR 28
CR 30
CR 32
CR 36
CR 40
CR 44
CR 48
CR 52
CR 56
CR 64
CR 80
CR 96

RBC

Torrington

SMITH
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR

1/2
5/8
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4

McGill
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH

1/2
5/8
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4

RBC
H-16
H-20
H-24
H-28
H-32
H-36
H-40
H-44
H-48
H-52
H-56
H-60
H-64
H-72
H-80
H-88
H-96
H-104
H-112
H-128

Yoke Roller Unsealed

SMITH
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR

3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Optional Features
Hex-Drive
Eccentric
Crowned O.D.
Thrust Seal

28

McGill
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR

3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Y-24
Y-28
Y-32
Y-36
Y-40
Y-44
Y-48
Y-52
Y-56
Y-60
Y-64
Y-72
Y-80
Y-88
Y-96
Y-104
Y-112
Y-128
Y-160
Y-192

SMITH
Add
Add
Add
Add

Suffix
Suffix
Suffix
Suffix

YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR

12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

McGill
B
E
C
L

Add Suffix B
Add Suffix E
Add Prefix C

tel. 800.932.0076 fax. 908.789.9429

RBC
Add Suffix W
Add Suffix X
Add Prefix C
Replace S with L
www.smithbearing.com

Torrington
Add Prefix B
Add Prefix E
Add Prefix C

INCH SIZES

Cam Followers (Needle Rollers)

I N T E R C H A N G E

Sealed

Cam Followers

Regular Stud Sealed

SMITH
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR

1/2-X
9/16

Heavy Stud Sealed

McGill

1/2-AX

-X

5/8-AX
5/8

-X
11/16 -X
3/4 -X
7/8 -X
1-X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5 -X
6 -X

CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF

T A B L E S

RBC

1/2-N-S
1/2

-S
9/16 -S
5/8-N-S
5/8 -S
11/16 -S
3/4 -S
7/8 -S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3- S
31/4 -S
31/2 -S
4 -S
5 -S
6 -S

S 16 -S
S 18 -S

S 20 -S
S 22 -S
S 24 -S
S 28 -S
S 32 -S
S 36 -S
S 40 -S
S 44 -S
S 48 -S
S 52 -S
S 56 -S
S 60 -S
S 64 -S
S 72 -S
S 80 -S
S 88 -S
S 96 -S
S 104 -S
S 112 -S
S 128 -S
S 160 -S
S 192 -S

Torrington
CRS
CRS

CRS
CRS

CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS

8
8-1
10
10-1
12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

SMITH
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR

1/2

-X
-X
3/4 -X
7/8 -X
1 -X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5/8

McGill
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH

1/2

RBC

-S
-S
3/4 -S
7/8 -S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3 -S
31/4 -S
31/2 -S
4 -S
5/8

H-16 -S
H-20 -S
H-24 -S
H-28 -S
H-32 -S
H-36 -S
H-40 -S
H-44 -S
H-48 -S
H-52 -S
H-56 -S
H-60 -S
H-64 -S
H-72 -S
H-80 -S
H-88 -S
H-96 -S
H-104 -S
H-112 -S
H-128 -S

Yoke Roller Sealed

SMITH
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR

3/4

-X
-X
1 -X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5 -X
6 -X

7/8

Optional Features
Hex-Drive
Eccentric
Crowned O.D.
Thrust Seal

McGill
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR

RBC

3/4

-S
-S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3 -S
31/4 -S
31/2 -S
4 -S
5 -S
6 -S
7/8

Y-24 -S
Y-28 -S
Y-32 -S
Y-36 -S
Y-40 -S
Y-44 -S
Y-48 -S
Y-52 -S
Y-56 -S
Y-60 -S
Y-64 -S
Y-72 -S
Y-80 -S
Y-88 -S
Y-96 -S
Y-104 -S
Y-112 -S
Y-128 -S
Y-160 -S
Y-192 -S

SMITH
Add
Add
Add
Add

Suffix
Suffix
Suffix
Suffix

Torrington
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS

12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

McGill
B
E
C
L

www.smithbearing.com

Add Suffix B
Add Suffix E
Add Prefix C

RBC
Add Suffix W
Add Suffix X
Add Prefix C
Replace S with L

tel. 800.932.0076 fax. 908.789.9429

Torrington
Add Prefix B
Add Prefix E
Add Prefix C

29

Cam Followers (Needle Rollers)

INCH SIZES

CR-SS & CR-X-SS

Stainless Steel
Stud Type

STA I N L E S S ST E E L

B
1/32

Screwdriver Slot
D

STAINLESS STEEL

Stainless Steel
Stud Type with
Screwdriver Slot
Sealed or Unsealed
X = Sealed

P A

H
T
N

General Information
The SMITH CR-SS and YR-SS Series of Cam Followers are manufactured from 440 Stainless
Steel for applications requiring increased corrosion resistance. Consult our Engineering
Department for special configurations, sizes and materials to meet your needs.

Dimensional Data (inches)

SMITH Bearing Number

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Recom.
Bore
+.0005
-.0005

Basic
Dynamic
Rating

UNSEALED

SEALED

CR-1/2-SS

CR-1/2-X-SS

.500

.375

.190

5/8

1/4

10-32

*1/8

19/64

.1900

475

CR-5/8-SS

CR-5/8-X-SS

.625

.4375

.250

3/4

5/16

1/4-28

*1/8

23/64

.2500

695

CR-3/4-SS

CR-3/4-X-SS

.750

.500

.375

7/8

3/8

3/8-24

1/4

3/32

3/16

1/2

.3750

1,245

CR-7/8-SS

CR-7/8-X-SS

.875

.500

.375

3/4

3/8

3/8-24

1/4

3/32

3/16

1/2

.3750

1,245

CR-1-SS

CR-1-X-SS

1.000

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

1,560

CR-11/8-SS

CR-11/8-X-SS

1.125

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

1,560

CR-11/4-SS

CR-11/4-X-SS

1.250

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.5000

2,750

CR-13/8-SS

CR-13/8-X-SS

1.375

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.5000

2,750

CR-11/2-SS

CR-11/2-X-SS

1.500

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.6250

3,390

CR-15/8-SS

CR-15/8-X-SS

1.625

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.6250

3,390

CR-13/4-SS

CR-13/4-X-SS

1.750

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

13/64

.7500

4,470

CR-17/8-SS

CR-17/8-X-SS

1.875

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

13/64

.7500

4,470

CR-2-SS

CR-2-X-SS

2.000

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.8750

5,660

CR-21/4-SS

CR-21/4-X-SS

2.250

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.8750

5,660

CR-21/2-SS

CR-21/2-X-SS

2.500

1.500

1.000

21/4

11/8

1-14

9/16

5/32

3/16

15/16

1.000

7,959

CR-23/4-SS

CR-23/4-X-SS

2.750

1.500

1.000

21/4

11/4

1-14

9/16

5/32

3/16

15/16

1.000

7,959

CR-3-SS

CR-3-X-SS

3.000

1.750

1.250

21/2

11/4

11/4-12

5/8

1/4

1/4

13/4

1.250

10,486

* Relubricate through head end only.

30

Min
Boss
Dia.

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

(lbs)

STA I N L E S S ST E E L

INCH SIZES

Cam Followers (Needle Rollers)

CR-B-SS & CR-XB-SS

Stainless Steel
Stud Type

B
1/32

Hex-Drive Socket
D

STAINLESS STEEL

Hex
H
T
N

Stainless Steel
Stud Type with
Hex-Drive Socket
Sealed or Unsealed
X = Sealed

General Information
The SMITH CR-SS and YR-SS Series of Cam Followers are manufactured from 440 Stainless
Steel for applications requiring increased corrosion resistance. Consult our Engineering
Department for special configurations, sizes and materials to meet your needs.

Dimensional Data (inches)

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length

SEALED

D
Roller
O.D.
+.000
-.001

CR-1/2-B-SS

CR-1/2-XB-SS

.500

.375

.190

5/8

1/4

10-32

1/8

19/64

.190

475

CR-5/8-B-SS

CR-5/8-XB-SS

.625

.4375

.250

3/4

5/16

1/4-28

1/8

23/64

.250

695

CR-3/4-B-SS

CR-3/4-XB-SS

.750

.500

.375

7/8

3/8

3/8-24

1/4

3/32

3/16

3/16

1/2

.375

1,245

CR-7/8-B-SS

CR-7/8-XB-SS

.875

.500

.375

3/4

3/8

3/8-24

1/4

3/32

3/16

3/16

1/2

.375

1,245

CR-1-B-SS

CR-1-XB-SS

1.000

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

1/4

5/8

.4375

1,560

CR-11/8-B-SS

CR-11/8-XB-SS

1.125

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

1/4

5/8

.4375

1,560

CR-11/4-B-SS

CR-11/4-XB-SS

1.250

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

1/4

3/4

.500

2,750

CR-13/8-B-SS

CR-13/8-XB-SS

1.375

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

1/4

3/4

.500

2,750

CR-11/2-B-SS

CR-11/2-XB-SS

1.500

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

5/16

57/64

.625

3,390

CR-15/8-B-SS

CR-15/8-XB-SS

1.625

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

5/16

57/64

.625

3,390

CR-13/4-B-SS

CR-13/4-XB-SS

1.750

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

5/16

13/64

.750

4,470

CR-17/8-B-SS

CR-17/8-XB-SS

1.875

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

5/16

13/64

.750

4,470

CR-2-B-SS

CR-2-XB-SS

2.000

1.250

.875

7/8-14

1/2

5/32

3/16

7/16

113/64

.875

5,660

CR-21/4-B-SS

CR-21/4-XB-SS

2.250

1.250

.875

7/8-14

1/2

5/32

3/16

7/16

113/64

.875

5,660

CR-21/2-B-SS

CR-21/2-XB-SS

2.500

1.500

1.000

21/4

11/8

1-14

9/16

5/32

3/16

1/2

15/16

1.000

7,959

CR-23/4-B-SS

CR-23/4-XB-SS

2.750

1.500

1.000

21/4

11/4

1-14

9/16

5/32

3/16

1/2

15/16

1.000

7,959

CR-3-B-SS

CR-3-XB-SS

3.000

1.750

1.250

21/2

11/4

11/4-12

5/8

1/4

1/4

5/8

13/4

1.250

10,486

SMITH Bearing Number

UNSEALED

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
H
Oil Hole Oil Hole
Location
Dia.

P
Lube
Fitting
Size

Hex
Size

Min
Boss.
Dia.

Recom.
Bore
+.0005
-.0000

Basic
Dynamic
Rating
(lbs)

Relubricate through threaded end only.

Cannot be relubricated.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

31

Cam Followers (Needle Rollers)

INCH SIZES

STA I N L E S S ST E E L

YR-SS & YR-X-SS

Stainless Steel
Yoke Type

W
B

Stainless Steel
Yoke Type
for Shaft Mounting
Sealed or Unsealed
X = Sealed

STAINLESS STEEL

General Information
The SMITH CR-SS and YR-SS Series of Cam Followers are manufactured from 440 Stainless
Steel for applications requiring increased corrosion resistance. Consult our Engineering
Department for special configurations, sizes and materials to meet your needs.

Dimensional Data (inches)

SEALED

UNSEALED

D
Roller
O.D.
+.000
-.001

YR-3/4-SS

YR-3/4-X-SS

.750

.250

.500

.5625

1/2

YR-7/8-SS

YR-7/8-X-SS

.875

.250

.500

.5625

YR-1-SS

YR-1-X-SS

1.000

.3125

.625

YR-11/8-SS

YR-11/8-X-SS

1.125

.3125

YR-11/4-SS

YR-11/4-X-SS

1.250

YR-13/8-SS

YR-13/8-X-SS

YR-11/2-SS

SMITH Bearing Number

32

A
Bore
Nominal
+.0002
-.0004

B
Roller
Width
+.000
-.005

W
Overall
Width
+.005
-.010

E
Min
Clamping
Diameter

Recommended Shaft Dia. Transition Fits

Slip Fit
Max

Press Fit

Basic
Dynamic
Rating

Min

Max

Min

(lbs)

.2497

.2493

.2505

.2501

1,160

1/2

.2497

.2493

.2505

.2501

1,160

.6875

5/8

.3122

.3118

.3130

.3126

1,560

.625

.6875

5/8

.3122

.3118

.3130

.3126

1,560

.375

.750

.8125

3/4

.3747

.3743

.3755

.3751

2,750

1.375

.375

.750

.8125

3/4

.3747

.3743

.3755

.3751

2,750

YR-11/2-X-SS

1.500

.4375

.875

.9375

57/64

.4372

.4368

.4380

.4376

3,390

YR-15/8-SS

YR-15/8-X-SS

1.625

.4375

.875

.9300

57/64

.4372

.4368

.4380

.4376

3,390

YR-13/4-SS

YR-13/4-X-SS

1.750

.500

1.000

1.0625

1-3/64

.4997

.4993

.5007

.5003

4,470

YR-17/8-SS

YR-17/8-X-SS

1.875

.500

1.000

1.0625

13/64

.4997

.4993

.5007

.5003

4,470

YR-2-SS

YR-2-X-SS

2.000

.625

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

5,660

YR-21/4-SS

YR-21/4-X-SS

2.250

.625

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

5,660

YR-21/2-SS

YR-21/2-X-SS

2.500

.750

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

7,959

YR-23/4-SS

YR-23/4-X-SS

2.750

.750

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

7,959

YR-3-SS

YR-3-X-SS

3.000

1.000

1.750

1.8125

13/4

.9996

.9992

1.0008

1.0003

10,486

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

I N T E R C H A N G E

Stainless Steel

CR-1/2 -SS
CR-5/8 -SS
CR-3/4 -SS
CR-7/8 -SS
CR-1-SS
CR-11/8 -SS
CR-11/4 -SS
CR-13/8 -SS
CR-11/2 -SS
CR-15/8 -SS
CR-13/4 -SS
CR-17/8 -SS
CR-2-SS
CR-21/4 -SS
CR-21/2 -SS
CR-23/4 -SS
CR-3-SS
CR-4-SS

McGill

Cam Followers

Regular Stud Hex Socket

Regular Stud Screw-Driver Slot

SMITH

T A B L E S

Carter

CF-1/2 -CR
CF-5/8 -CR
CF-3/4 -CR
CF-7/8 -CR
CF-1-CR
CF-11/8 -CR
CF-11/4 -CR
CF-13/8 -CR
CF-11/2 -CR
CF-15/8 -CR
CF-13/4 -CR
CF-17/8 -CR
CF-2 -CR
CF-21/4 -CR
CF-21/2 -CR
CF-23/4 -CR
CF-3 -CR
CF-4 -CR

SC-16
SC-20
SC-24
SC-28
SC-32
SC-36
SC-40
SC-44
SC-48
SC-52
SC-56
SC-60
SC-64
SC-72

SMITH

McGill

Carter

YR-3/4 -SS
YR-7/8 -SS

CYR-3/4 -CR
CYR-7/8 -CR

YR-1 -SS
YR-11/8 -SS
YR-11/4 -SS
YR-13/8 -SS
YR-11/2 -SS
YR-15/8 -SS
YR-13/4 -SS
YR-17/8 -SS
YR-2-SS
YR-21/4 -SS

CYR-1 -CR
CYR-11/8 -CR
CYR-11/4 -CR
CYR-13/8 -CR
CYR-11/2 -CR
CYR-15/8 -CR
CYR-13/4 -CR
CYR-17/8 -CR
CYR-2 -CR

SY-24
SY-28
SY-32
SY-36
SY-40
SY-44
SY-48
SY-52
SY-56
SY-60
SY-64
SY-72

SMITH

McGill

CR-1/2 -B-SS
CR-5/8 -B-SS
CR-3/4-B-SS
CR-7/8 -B-SS
CR-1-B-SS
CR-11/8 -B-SS
CR-11/4 -B-SS
CR-13/8 -B-SS
CR-11/2 -B-SS
CR-15/8 -B-SS
CR-13/4 -B-SS
CR-17/8 -SS
CR-2-B-SS
CR-21/4 -B-SS
CR-21/2-B-SS
CR-23/4 -B-SS
CR-3-B-SS
CR-4-B-SS

Carter

CF-1/2 -B-CR
CF-5/8 -B-CR
CF-3/4 -B-CR
CF-7/8 -B-CR
CF-1-B-CR
CF-11/8 -B-CR
CF-11/4 -B-CR
CF-13/8 -B-CR
CF-11/2 -B-CR
CF-15/8 -B-CR
CF-13/4 -B-CR
CF-17/8 -B-CR
CF-2 -B-CR
CF-21/4 -B-CR
CF-21/2 -B-CR
CF-23/4 -B-CR
CF-3-B-CR
CF-4-B-CR

SC-16-B
SC-20-B
SC-24-B
SC-28-B
SC-32-B
SC-36-B
SC-40-B
SC-44-B
SC-48-B
SC-52-B
SC-56-B
SC-60-B
SC-64-B
SC-72-B

Yoke Type

www.smithbearing.com

Coding for Other Features

Optional Feature

SMITH

Sealed
Hex-Drive

McGILL

Carter

add suffix X

add suffix S

add suffix S

add suffix B

add suffix B

add suffix B

tel. 800.932.0076 fax. 908.789.9429

33

C a m

F o l l o w e r s

INCH SIZES

BCR & BCR-X

Non-Metallic Bushing
Stud Type

N O N - M E TA L L I C B U S H I N G

B
1/32

Screwdriver Slot
Stud Type with
Non-Metallic Bushing
Screwdriver Slot
Sealed or Unsealed
X = Sealed

NON-METALLIC
BUSHING

H
T
N

General Information
The SMITH BCR and BYR Series replace the standard steel needle rollers with a non-metallic,
self-lubricating, engineered plastic bushing which eliminates or reduces the need for bearing
lubrication. This product is available in Sealed, Crowned & Eccentric Stud type. The Load Capacity is
based on speed used. Consult our Engineering Department for load calculations. Max allowable
temperature 250F typical. Higher temperature versions available.
Dimensional Data (inches)

SEALED

D
Roller
O.D.
+.000
-.001

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length
+.005
-.0005

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

P
Lube
Fitting
Size

Min.
Boss
Dia.

Recom.
Bore
+.0005
-.0005

BCR-1/2

BCR-1/2-X

.500

.375

.190

5/8

1/4

10-32

1/8

19/64

.190

BCR-5/8

BCR-5/8-X

.625

.4375

.250

3/4

5/16

1/4-28

1/8

23/64

.250

BCR-3/4

BCR-3/4-X

.750

.500

.375

7/8

3/8

3/8-24

1/4

3/32

3/16

1/2

.375

BCR-7/8

BCR-7/8-X

.875

.500

.375

3/4

3/8

3/8-24

1/4

3/32

3/16

1/2

.375

BCR-1

BCR-1-X

1.000

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

BCR-11/8

BCR-11/8-X

1.125

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

BCR-11/4

BCR-11/4-X

1.250

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.500

BCR-13/8

BCR-13/8-X

1.375

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.500

BCR-11/2

BCR-11/2-X

1.500

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.625

BCR-15/8

BCR-15/8-X

1.625

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.625

BCR-13/4

BCR-13/4-X

1.750

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

13/64

.750

BCR-17/8

BCR-17/8-X

1.875

1.000

.750

13/4

7/8

3/4-16

716

3/32

3/16

13/64

.750

BCR-2

BCR-2-X

2.000

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.875

BCR-21/4

BCR-21/4-X

2.250

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.875

BCR-21/2

BCR-21/2-X

2.500

1.500

1.000

21/4

11/8

1-14

9/16

5/32

3/16

15/16

1.000

BCR-23/4

BCR-23/4-X

2.750

1.500

1.000

21/4

11/4

1-14

9/16

5/32

3/16

15/16

1.000

BCR-3

BCR-3-X

3.000

1.750

1.250

21/4

11/4

11/4-12

5/8

1/4

1/4

13/4

1.250

SMITH Bearing Number

UNSEALED

N
Oil Hole
Location

H
Oil Hole
Dia.

1) Add suffix C for Crowned. Example for Unsealed and Crowned: BCR-1/2-C. Example for Sealed and Crowned: BCR-1/2-XC.
2) Add suffix E for Eccentric. Example for Unsealed and Eccentric: BCR-1/2-E. Example for Sealed and Eccentric: BCR-1/2-XE.
NOTE: Bushing type bearings are designed for operation without lubrication at service temperature from -40 F to 200 F (250 F for short duration)

34

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

N O N - M E TA L L I C B U S H I N G

C a m

F o l l o w e r s

BCR-B & BCR-XB

Non-Metallic Bushing
Stud Type

M
1/32
S

Hex-Drive Socket
P

NON-METALLIC
BUSHING

HEX
H
T
N

Stud Type with

Non-Metallic Bushing
Hex-Drive Socket
Sealed or Unsealed
X = Sealed

General Information
The SMITH BCR and BYR Series replace the standard steel needle rollers with a non-metallic,
self-lubricating, engineered plastic bushing which eliminates or reduces the need for bearing
lubrication. This product is available in Sealed, Crowned & Eccentric Stud type. The Load Capacity is
based on speed used. Consult our Engineering Department for load calculations. Max allowable
temperature 250F typical. Higher temperature versions available.
Dimensional Data (inches)

UNSEALED

SEALED

D
Roller
O.D.
+.000
-.001

BCR-1/2-B

BCR-1/2-XB

.500

.375

.190

5/8

1/4

10-32

1/8

19/64

.190

BCR-5/8-B

BCR-5/8-XB

.625

.4375

.250

3/4

5/16

1/4-28

1/8

23/64

.250

BCR-3/4-B

BCR-3/4-XB

.750

.500

.375

7/8

3/8

3/8-24

1/4

3/32

3/16

1/2

.375

BCR-7/8-B

BCR-7/8-XB

.875

.500

.375

3/4

3/8

3/8-24

1/4

3/32

3/16

1/2

.375

BCR-1-B

BCR-1-XB

1.000

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

BCR-11/8-B

BCR-11/8-XB

1.125

.625

.4375

1/2

7/16-20

1/4

3/32

3/16

5/8

.4375

BCR-11/4-B

BCR-11/4-XB

1.250

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.500

BCR-13/8-B

BCR-13/8-XB

1.375

.750

.500

11/4

5/8

1/2-20

5/16

3/32

3/16

3/4

.500

BCR-11/2-B

BCR-11/2-XB

1.500

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.625

BCR-15/8-B

BCR-15/8-XB

1.625

.875

.625

11/2

3/4

5/8-18

3/8

3/32

3/16

57/64

.625

BCR-13/4-B

BCR-13/4-XB

1.750

1.000

.750

13/4

7/8

3/4-16

7/16

3/32

3/16

13/64

.750

BCR-17/8-B

BCR-17/8-XB

1.875

1.000

.750

13/4

7/8

3/4-16

716

3/32

3/16

13/64

.750

BCR-2-B

BCR-2-XB

2.000

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.875

BCR-21/4-B

BCR-21/4-XB

2.250

1.250

.875

7/8-14

1/2

5/32

3/16

113/64

.875

BCR-21/2-B

BCR-21/2-XB

2.500

1.500

1.000

21/4

11/8

1-14

9/16

5/32

3/16

15/16

1.000

BCR-23/4-B

BCR-23/4-XB

2.750

1.500

1.000

21/4

11/4

1-14

9/16

5/32

3/16

15/16

1.000

BCR-3-B

BCR-3-XB

3.000

1.750

1.250

21/4

11/4

11/4-12

5/8

1/4

1/4

13/4

1.250

SMITH Bearing Number

B
Roller
Width
+.000
-.005

A
Stud
Dia.
+.001
-.000

M
Stud
Length
+.005
-.0005

S
Eff.
Thread
Min.

T
Thread
U.N.F.
Class
2A

N
Oil Hole
Location

H
Oil Hole
Dia.

P
Lube
Fitting
Size

Min.
Boss
Dia.

Recom.
Bore
+.0005
-.0005

1) Add suffix C for Crowned. Example for Unsealed and Crowned: BCR-1/2-BC. Example for Sealed and Crowned: BCR-1/2-XBC.
2) Add suffix E for Eccentric. Example for Unsealed and Eccentric: BCR-1/2-BE. Example for Sealed and Eccentric: BCR-1/2-XBE.
NOTE: Bushing type bearings are designed for operation without lubrication at service temperature from -40 F to 200 F (250 F for short duration)

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

35

C a m

F o l l o w e r s

INCH SIZES

N O N - M E TA L L I C B U S H I N G

BYR & BYR-X

Non-Metallic Bushing
Yoke Type
Yoke Type with
Non-Metallic Bushing
for Shaft Mounting
Sealed or Unsealed
X = Sealed

W
B

NON-METALLIC
BUSHING

General Information
The SMITH BCR and BYR Series replace the standard steel needle rollers with a non-metallic,
self-lubricating, engineered plastic bushing which eliminates or reduces the need for bearing
lubrication. This product is available in Sealed, Crowned & Eccentric Stud type. The Load Capacity is
based on speed used. Consult our Engineering Department for load calculations. Max allowable
temperature 250F typical. Higher temperature versions available.
Dimensional Data (inches)

SEALED

+.000
-.001

A
Bore
Nominal
+.0002
-.0004

B
Roller
Width
+.000
-.005

W
Overall
Width
+.005
-.010

E
Min
Clamping
Dia.

BYR-3/4

BYR-3/4-X

.750

.250

.500

.5625

BYR-7/8

BYR-7/8-X

.875

.250

.500

BYR-1

BYR-1-X

1.000

.310

BYR-11/8

BYR-11/8-X

1.125

BYR-11/4

BYR-11/4-X

BYR-13/8

SMITH Bearing Number

UNSEALED

D
Roller

Recommended Shaft Diameter

Slip Fit

Press Fit

Max

Min

Max

Max

1/2

.2497

.2493

.2505

.2501

.5625

1/2

.2497

.2493

.2505

.2501

.625

.6875

5/8

.3122

.3118

.3130

.3126

.3125

.625

.6875

5/8

.3122

.3118

.3130

.3126

1.250

.375

.750

.8125

3/4

.3747

.3743

.3755

.3751

BYR-13/8-X

1.375

.375

.750

.8125

3/4

.3747

.3743

.3755

.3751

BYR-11/2

BYR-11/2-X

1.500

.4375

.875

.9375

57/64

.4372

.4368

.4380

.4376

BYR-15/8

BYR-15/8-X

1.625

.4375

.875

.9400

57/64

.4372

.4368

.4380

.4376

BYR-13/4

BYR-13/4-X

1.750

.500

1.000

1.0625

13/64

.4997

.4993

.5007

.5003

BYR-17/8

BYR-17/8-X

1.875

.500

1.000

1.0625

13/64

.4997

.4993

.5007

.5003

BYR-2

BYR-2-X

2.000

.625

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

BYR-21/4

BYR-21/4-X

2.250

.625

1.250

1.3125

113/64

.6247

.6243

.6257

.6253

BYR-21/2

BYR-21/2-X

2.500

.750

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

BYR-23/4

BYR-23/4-X

2.750

.750

1.500

1.5625

15/16

.7497

.7493

.7507

.7503

BYR-3

BYR-3-X

3.000

1.000

1.750

1.8125

13/4

.9996

.9992

1.0008

1.0003

1) Add suffix C for Crowned. Example for Unsealed and Crowned: BYR-1/2-C. Example for Sealed and Crowned: BYR-1/2-XC.
NOTE: Bushing type bearings are designed for operation without lubrication at service temperature from -40 F to 200 F (250 F for short duration)

36

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

I N C H

S I Z E S

Cam Followers (Needle Rollers)

I N T E R C H A N G E

T A B L E S

Cam Followers with

Non-Metallic Bushing

Stud Type Hex Socket

Stud Type Screw-Driver Slot

SMITH

McGill

Carter

BCR-1/2
BCR-5/8
BCR-11/16
BCR-3/4
BCR-7/8
BCR-1
BCR-11/8
BCR-11/4
BCR-13/8
BCR-11/2
BCR-15/8
BCR-13/4
BCR-17/8
BCR-2
BCR-21/4
BCR-21/2
BCR-23/4
BCR-3

BCF-1/2
BCF-5/8
BCF-11/16
BCF-3/4
BCF-7/8
BCF-1
BCF-11/8
BCF-11/4
BCF-13/8
BCF-11/2
BCF-15/8
BCF-13/4
BCF-17/8
BCF-2
BCF-21/4
BCF-21/2
BCF-23/4
BCF-3

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

SMITH

McGill

Carter

BYR-3/4
BYR-7/8
BYR-1
BYR-11/8
BYR-11/4
BYR-13/8
BYR-11/2
BYR-15/8
BYR-13/4
BYR-17/8
BYR-2
BYR-21/4
BYR-21/2
BYR-23/4
BYR-3

BCYR-3/4
BCYR-7/8
BCYR-1
BCYR-11/8
BCYR-11/4
BCYR-13/8
BCYR-11/2
BCYR-15/8
BCYR-13/4
BCYR-17/8
BCYR-2
BCYR-21/4
BCYR-21/2
BCYR-23/4
BCYR-3

NYR-24-A
NYR-28-A
NYR-32-A
NYR-36-A
NYR-40-A
NYR-44-A
NYR-48-A
NYR-52-A
NYR-56-A
NYR-60-A
NYR-64-A
NYR-72-A
NYR-80-A
NYR-88-A
NYR-96-A

SMITH
BCR-1/2 -B
BCR-5/8 -B
BCR-11/16 -B
BCR-3/4 -B
BCR-7/8 -B
BCR-1 -B
BCR-11/8 -B
BCR-11/4 -B
BCR-13/8 -B
BCR-11/2 -B
BCR-15/8 -B
BCR-13/4 -B
BCR-17/8 -B
BCR-2-B
BCR-21/4 -B
BCR-21/2 -B
BCR-23/4 -B
BCR-3 -B

McGill
BCF-1/2 -B
BCF-5/8 -B
BCF-11/16 -B
BCF-3/4 -B
BCF-7/8 -B
BCF-1 -B
BCF-11/8 -B
BCF-11/4 -B
BCF-13/8 -B
BCF-11/2 -B
BCF-15/8 -B
BCF-13/4 -B
BCF-17/8 -B
BCF-2 -B
BCF-21/4 -B
BCF-21/2 -B
BCF-23/4 -B
BCF-3 -B

Carter
SFH-16-A
SFH-20-A
SFH-22-A
SFH-24-A
SFH-28-A
SFH-32-A
SFH-36-A
SFH-40-A
SFH-44-A
SFH-48-A
SFH-52-A
SFH-56-A
SFH-60-A
SFH-64-A
SFH-72-A
SFH-80-A
SFH-88-A
SFH-96-A

Coding for Other Features

Yoke Type

www.smithbearing.com

Optional Feature

SMITH

McGILL

Sealed

add suffix X

add suffix S

tel. 800.932.0076 fax. 908.789.9429

37

Cam Followers (Needle Rollers)

METRIC SIZES
rs

MCR & MCR-S

B2
M1

MCRV & MCRV-S

Single Row
Stud Type
MCR
MCR-S
MCRV
MCRV-S

C1

G1

M
d2
d

Caged Unsealed
Caged Sealed
Full Complement Unsealed
Full Complement Sealed

B
RAD 500mm

Basic Load Ratings

Dimensions (mm)
(For Tolerances, See chart in Engineering Section)

SMITH Bearing
Number
D

G
B1

C**

rs

B1

B2

G1

M1

dyn
stat
Newtons

C1

d2

dyn
stat
Newtons

C0

Cw

Cow

3800

3750

3150

3300

6400

8500

4850

6500

4250

4600

3500

3900

7300

10800

5500

7900

5700

6500

4450

5200

MCR16
MCR16-S
MCRV16

16

11

0.15

28

16

M6 x 1

0.6

12

11

0.15

32

20

M8 x 1.25 10

0.6

14

MCRV19-S
MCR22
MCR22-S
MCRV22

22

10

12

0.30

36

23

M10 x 1

12

0.6

MCR26
MCR26-S
MCRV26

26

10

12

0.30

36

23

M10 x 1

12

0.6

MCR30
MCR30-S
MCRV30

30

12

14

0.60

40

25

M12 x 1.5 13

0.6

12900

6300

9100

5700

6500

5100

6200

12900

7300

11300

8100

9700

6800

8400

19000

9500

14600

8100
32

12

14

0.60

40

25

M12 x 1.5 13

0.6

9700

7100

9000

12200

19000

65.3

6000
11000

92.5

4500

94.5

11000

103.5

10000 15800

4500

105.5

4500
12900
35

16

18

0.60

52

32.5

M16 x 1.5 17

0.8

19000

9700

14100

7000

181.5

7000

27
18300

35000

12800 23000

3400

183.5

3400
14200
40

18

20

1.00

58

36.5

M18 x1.5 19

0.8

20400

10900 15500

6000

32
21000

39500

14800 26500

2900
2900

Relubricate through head end only.

** Tolerance for C Raceway Width is +0.00/-0.12 mm
For Dimensional Tolerances, see Metric Tolerance Chart in Engineering Section.
tel. 800.932.0076 fax. 908.789.9429

262.8

6000

MCRV40-S

38

62.3

8300

23

MCR40

MCRV40

16000

4500

MCRV35-S

MCR40-S

49.3

8300
12200

MCR35

MCRV35

48.3

6000

6000
8600

MCRV32-S

MCR35-S

16000

11000

23

MCR32

MCRV32

35.2

7000

6000
8600

MCRV30-S

MCR32-S

31.2

11000

17

MCRV26-S

22

14000
7000

17

MCRV22-S

20

8500
20000

19

16000
8500

MCR19

MCRV19

22000

MCRV16-S

MCR19-S

Max
Speed* Mass
(rpm) (grams)

www.smithbearing.com

264.8

METRIC SIZES

Cam Followers (Needle Rollers)

MCR & MCR-S

MCRV & MCRV-S
Single Row
Stud Type
(continued)

(chart continued from preceding page)

Basic Load Ratings

Dimensions (mm)
(For Tolerances, See chart in Engineering Section)

SMITH Bearing
Number
D

c**

rs

B1

B2

G1

M1

dyn
stat
Newtons

C1

d2

dyn
stat
Newtons

C0

Cw

Cow

19500

32000

15500 25500

28000

59000

20600 42000

19500

32000

16800 28500

28000

59000

22500 48000

30500

53000

26500 47500

MCR47
MCR47-S
MCRV47

47

20

24

1.0

66

40.5

M20x1.5

21

0.8

37

52

20

24

1.0

66

40.5

M20x1.5

21

0.8

37

MCR62

MCRV62

62

24

29

1.0

80

49.5

11

M24x1.5

25

0.8

MCR72

MCRV72

72

24

29

1.1

80

49.5

11

M24x1.5

25

0.8

MCR80

MCRV80

80

30

35

1.1

100 63.0

15

M30x1.5

32

1.0

91000

34000 76000

30500

53000

28000 53000

91000

37000 85000

45000

85000

39500 77000

45000
30

35

1.1

100 63.0

15

M30x1.5

32

1.0

85000

40500 80000

2200

2200

53

45000
35

1.1

100 63.0

15

M30x1.5

32

1.0

830.2

1068.2

85000

41500 83000

60000 142000 53000 130000

MCRV90-S

1610.0

1700
1621.0

2600
1800.0

1700
1820.0

2600
2600

53

1073.2

2600

1700

30

818.2

3800

2600
60000 142000 44000 120000

90

484.5

3800

1700

MCR90

MCRV90

2600

2600
60000 142000 49500 120000

85

480.5

2200
41500

MCRV85-S

MCR90-S

4900

3800

53

MCR85

MCRV85

409.5

2200
41500

MCRV80-S

MCR85-S

2600

3800

44

MCRV72-S

MCR80-S

405.5

2600

44

MCRV62-S

MCR72-S

4900

4900

MCRV52-S

MCR62-S

2600

MCR52

MCRV52

4900

MCRV47-S

MCR52-S

Max
Speed* Mass
(rpm) (grams)

2010.0

1700
1700

2030.0

1)
2)
3)
4)

Standard bearing has Crowned Roller Outside Diameter For Straight Cylindrical Outside Roller Diameter, add suffix C. Example: MCR-16-C
Add suffix B for hex-drive socket. Example: MCR-16-B
Add suffix E for eccentric collar. Example: MCR-16-E
The basic load rating C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted in a housing
Options:
MCR-16- S C B E
bore with the normal rolling bearing fit. When used as a track roller, the load rating Cw and Cow apply.
SEALED
5) *Limiting Speed for grease lubrication: For oil lubrication speed may be increased by up to 30%.
STRAIGHT O.D.
HEX-DRIVE
6) ** Tolerance for C Raceway Width is +0.00/-0.12 mm
ECCENTRIC
Relubricate through head end only.
For Dimensional Tolerances, see Metric Tolerance Chart in Engineering Section.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

39

Cam Followers (Needle Rollers)

METRIC SIZES

MYR & MYR-S

B
C

rs

MYRV & MYRV-S

Single Row
Yoke Type
MYR
MYR-S
MYRV
MYRV-S

d d1
RAD
500mm

Caged Unsealed
Caged Sealed
Full Complement Unsealed
Full Complement Sealed

Add suffix S for Sealed

Basic Load Ratings

Dimensions (mm)

SMITH Bearing
Number

(For Tolerances, See chart

in Engineering Section)

dyn

C**

rs

d1

16

12

11

0.15

12

19

12

11

0.15

14

24

15

14

0.30

19

10

30

15

14

0.60

23

12

32

15

14

0.60

25

15

35

19

18

0.60

27

17

40

21

20

1.00

32

20

47

25

24

1.00

37

25

52

25

24

1.00

42

30

62

29

28

1.00

51

35

72

29

28

1.10

58

40

80

32

30

1.10

66

45

85

32

30

1.10

72

50

90

32

30

1.10

76

MYR5
MYRV5
MYR6
MYRV6
MYR8
MYRV8
MYR10
MYRV10
MYR12
MYRV12
MYR15
MYRV15
MYR17
MYRV17
MYR20
MYRV20
MYR25
MYRV25
MYR30
MYRV30
MYR35
MYRV35
MYR40
MYRV40
MYR45
MYRV45
MYR50
MYRV50

Newtons

stat

Track Roller
dyn
stat
Newtons

Co

Cw

Max
Speed*
(rpm)

Cow

Mass
(grams)

3800

3750

3150

3300

22000

14

6400

8500

4850

6500

8500

15

4250

4600

3500

3900

20000

20

7300

10800

5500

7900

7000

21

6800

7700

5500

6400

15000

41

10400

15600

7800

11400

5500

42

8100

9700

6800

8400

11000

64

12200

19000

9500

14600

4500

65

8700

11000

6900

8800

9000

71

13200

21700

9700

15400

3900

72

12900

19000

9700

14100

7000

103

18300

35000

12800

23000

3400

105

14200

20400

10900

15500

6000

144

21000

39500

14800

26500

2900

152

19500

32000

15500

25500

4900

246

28000

59000

20600

42000

2600

254

21200

38000

15400

26500

3600

275

31000

72000

20500

44000

2100

285

34000

59000

23600

38500

2600

470

48500

108000

30500

63000

1700

481

37000

69000

25500

44500

2000

635

53000

127000

33000

73000

1400

647

49000

94000

33000

59000

1700

805

66000

159000

41000

90000

1300

890

51000

101000

32500

59000

1500

910

61000

112000

41000

90000

1200

935

52000

108000

32000

59000

1300

960

72000

191000

40500

93000

1000

990

1) Standard bearing has Crowned Roller Outside Diameter For Straight Cylindrical Outside Roller Diameter, add suffix C. Example: MYR-5-C
2) Add suffix S for sealed. Example for Sealed: MYR-5-S
3) The basic load rating C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted in a housing
bore with the normal rolling bearing fit. When used as a track roller, the load rating Cw and Cow apply.
4) *Limiting Speed for grease lubrication: For oil lubrication speed may be increased by up to 30%. For Sealed bearings, speed in chart should be reduced by 30%.
5) ** Tolerance for C Raceway Width is +0.00/-0.12 mm
For Dimensional Tolerances, see Metric Tolerance Chart in Engineering Section.

40

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Double Row
Needle Rollers

METRIC SIZES C a m F o l l o w e r s
C1

rs

B2

NUKR
Double Row Heavy Rollers
Stud Type
Shielded Full Complement

M1
G

d
d2

D M

G1
B1
B

NUKR bearings are standard with 500 mm Crowned Outer Race

Basic Load Ratings
Dimensions (mm)
(For Tolerances, See chart in Engineering Section)

SMITH Bearing
Number

B1

B2

G1

M1

dyn
stat
Newtons

C1

d2

C0

Max
Speed* Mass
(rpm) (grams)

Track Roller
dyn
stat
Newtons

C**

rs

Cw

Cow

NUKR-35

35

16

18

0.6

52

32.5

M16x1.5 17

0.8

21

23,000 27,000 16,000 18,300 6,500 176

NUKR-40

40

18

20

58

36.5

M18x1.5 19

0.8

23

24,800 31,000 18,500 22,800 5,500 257

NUKR-47

47

20

24

66

40.5

M20x1.5 21

0.8

27

39,000 50,000 28,000 34,500 4,200 380

NUKR-52

52

20

24

66

40.5

M20x1.5 21

0.8

31

43,500 60,000 29,000 37,500 3,400 450

NUKR-62

62

24

29

80

49.5

11 M24x1.5 25

0.8

38

59,000 79,000 40,500 51,000 2,600 795

NUKR-72

72

24

29

1.1

80

49.5

11 M24x1.5 25

0.8

44

65,000 93,000 45,000 61,000 2,100 1,200

NUKR-80

80

30

35

1.1

100

63

15 M30x1.5 32

47

95,000 133,000 67,000 93,000 1,800 1,800

NUKR-85

85

30

35

1.1

100

63

15 M30x1.5 32

47

96,000 133,000 67,000 93,000 1,800 1,740

NUKR-90

90

30

35

1.1

100

63

15 M30x1.5 32

47

95,000 133,000 77,000 110,000 1,800 2,300

1) The basic load rating C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted in a housing
bore with the normal rolling bearing fit. When used as a track roller, the load rating Cw and Cow apply.
2) *Limiting Speed for grease lubrication: For oil lubrication speed may be increased by up to 30%.
3) ** Tolerance for C Raceway Width is +0.00/-0.12 mm
4) Add suffix B for hex-drive socket. Example for Hex-drive: NUKR-35-B
5) Add suffix E for eccentric sleeve. Example for Eccentric Sleeve: NUKR-35-E
6) Standard bearings have crowned outer race.
For straight cylindrical outer race add suffix C. Example for straight cylindrical outer race: NUKR-35-C

INTERCHANGE TABLE
Double Row Heavy Rollers
Shielded Full Complement

For Dimensional Tolerances, see Metric Tolerance Chart in Engineering Section.

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

SMITH INA

McGILL

NUKR-35
NUKR-40
NUKR-47
NUKR-52
NUKR-62
NUKR-72
NUKR-80
NUKR-85
NUKR-90

MCFD-35
MCFD-40
MCFD-47
MCFD-52
MCFD-62
MCFD-72
MCFD-80
MCFD-85
MCFD-90

41

Double Row
Needle Rollers

Cam Followers

METRIC SIZES

B
C

rs
rst

MUTD
Double Row Heavy Rollers
Yoke Type
Shielded Full Complement

d d1

RAD 500mm

Basic Load Ratings

Dimensions (mm)
Bearing

SMITH
Number

dyn
stat
Newtons

(For Tolerances, See chart in Engineering Section)

Max
Speed*

Mass

(rpm)

(grams)

C**

rs

rst

d1

C0

Cw

Cow

MUTD-15

15

35

19

18

0.6

0.3

20

23,000

27,000

16,000

18,300

6,500

99

MUTD-17

17

40

21

20

0.3

22

24,800

31,000

18,500

22,800

5,500

147

MUTD-1542

15

42

19

18

0.6

0.3

20

23,000

27,000

19,400

23,800

6,500

158

MUTD-1747

17

47

21

20

0.3

22

24,800

31,000

21,300

28,000

5,500

220

MUTD-20

20

47

25

24

0.3

27

39,000

50,000

28,000

35,000

4,200

245

MUTD-2052

20

52

25

24

0.3

27

39,000

50,000

31,500

41,000

4,200

321

MUTD-25

25

52

25

24

0.3

31

43,500

60,000

29,000

37,500

3,400

281

MUTD-2562

25

62

25

24

0.3

31

43,500

60,000

35,500

50,000

3,400

450

MUTD-30

30

62

29

28

0.3

38

59,000

79,000

40,000

51,000

2,600

465

MUTD-3072

30

72

29

28

0.3

38

59,000

79,000

48,000

65,000

2,600

697

MUTD-35

35

72

29

28

1.1

0.6

44

65,000

93,000

45,000

61,000

2,100

630

MUTD-3580

35

80

29

28

1.1

0.6

44

65,000

93,000

51,000

72,000

2,100

836

MUTD-40

40

80

32

30

1.1

0.6

51

90,000

134,000

56,000

76,000

1,600

816

MUTD-45

45

85

32

30

1.1

0.6

55

95,000

147,000

56,000

79,000

1,400

883

MUTD-4090

40

90

32

30

1.1

0.6

51

90,000

134,000

66,000

96,000

1,600

1,129

MUTD-50

50

90

32

30

1.1

0.6

60

100,000

161,000

57,000

81,000

1,300

950

MUTD-45100

45

100

32

30

1.1

0.6

55

95,000

147,000

72,000

108,000

1,400

1,396

MUTD-50110

50

110

32

30

1.1

0.6

60

100,000

161,000

76,000

121,000

1,300

1,690

1) The basic load rating C and Co apply if the bearing outer ring
(with cylindrical outside surface) is mounted in a housing
bore with the normal rolling bearing fit. When used as a
track roller, the load rating Cw and Cow apply.
2) Standard bearing has Crowned Roller Outside Diameter
For Straight Cylindrical Outside Roller Diameter, add suffix C.
Example: MUTD-15-C

INTERCHANGE TABLE
Double Row Heavy Rollers
Shielded Full Complement

3) *Limiting Speed is given for a lightly loaded bearing with oil lubrication.
4) ** Tolerance for C Raceway Width is +0.00/-0.12 mm

42

Track Roller
dyn
stat
Newtons

tel. 800.932.0076 fax. 908.789.9429

SMITH
MUTD-15
MUTD-17
MUTD-1542
MUTD-1747
MUTD-20
MUTD-2052
MUTD-25
MUTD-2562
MUTD-30
MUTD-3072
MUTD-35
MUTD-3580
MUTD-40
MUTD-45
MUTD-4090
MUTD-50
MUTD-45100
MUTD-50110

McGILL
MCYRD-15
MCYRD-17
MCYRD-1542
MCYRD-1747
MCYRD-20
MCYRD-2052
MCYRD-25
MCYRD-2562
MCYRD-30
MCYRD-3072
MCYRD-35
MCYRD-3580
MCYRD-40
MCYRD-45
MCYRD-4090
MCYRD-50
MCYRD-45100
MCYRD-50110

www.smithbearing.com

INA
NUTR-15
NUTR-17
NUTR-1542
NUTR-1747
NUTR-20
NUTR-2052
NUTR-25
NUTR-2562
NUTR-30
NUTR-3072
NUTR-35
NUTR-3580
NUTR-40
NUTR-45
NUTR-4090
NUTR-50
NUTR-45100
NUTR-50110

METRIC SIZES

Metric

Cam Followers (Needle Rollers)

Cam Followers

STUD TYPE Caged & Full Complement

SMITH

McGILL

INA SKF NTN

IKO THK

Caged

Full
Complement

Caged

Full
Complement

Caged

Full
Complement

Caged

Full
Complement

MCR-13
MCR-16
MCR-19
MCR-22

MCR-26

MCR-30
MCR-32
MCR-35
MCR-40

MCR-47

MCR-52

MCR-62

MCR-72

MCR-80
MCR-85
MCR-90

MCRV-13
MCRV-16
MCRV-19
MCRV-22

MCRV-26

MCRV-30
MCRV-32
MCRV-35
MCRV-40

MCRV-47

MCRV-52

MCRV-62

MCRV-72

MCRV-80
MCRV-85
MCRV-90

MCFR-13
MCFR-16
MCFR-19
MCFR-22
MCFR-22-A
MCFR-26
MCFR-26-A
MCFR-30
MCFR-32
MCFR-35
MCFR-40
MCFR-40-A
MCFR-47
MCFR-47-A
MCFR-52
MCFR-52-A
MCFR-62
MCFR-62-A
MCFR-72
MCFR-72-A
MCFR-80
MCFR-85
MCFR-90

MCF-13
MCF-16
MCF-19
MCF-22
MCF-22A
MCF-26
MCF-26A
MCF-30
MCF-32
MCF-35
MCF-40
MCF-40A
MCF-47
MCF-47A
MCF-52
MCF-52A
MCF-62
MCF-62A
MCF-72
MCF-72A
MCF-80
MCF-85
MCF-90

KR-16
KR-19
KR-22

KR-26

KR-30
KR-32
KR-35
KR-40

KR-47

KR-52

KR-62

KR-72

KR-80
KR-85
KR-90

KRV-16
KRV-19
KRV-22

KRV-26

KRV-30
KRV-32
KRV-35
KRV-40

KRV-47

KRV-52

KRV-62

KRV-72

KRV-80

KRV-90

CF5
CF6R
CF8R

CF10R

CF10-1R
CF12R
CF12-1R
CF16R

CF18R

CF20-1R

CF20R

CF24R

CF24-1R
CF30R
CF30-1R
CF30-2R

CF6VR
CF8VR

CF10VR

CF10-1VR
CF12VR
CF12-1VR
CF16VR

CF18VR

CF20-1VR

CF20VR

CF24VR

CF24-1VR
CF30VR
CF30-1VR
CF30-2VR

Coding for Other Cam Followers and Yoke Roller Types

Optional Features

SMITH

Sealed
Cylindrical O.D.
Hex-Drive
Eccentric

add suffix S
add suffix C
add suffix B
add suffix E

McGILL
add suffix S
add suffix X
add suffix B
add prefix E

INA SKF

IKO

THK

NTN

add suffix PP
add suffix X
add suffix SK
add prefix E

add suffix UU
remove suffix R
add suffix B
add prefix E

add suffix UU
remove suffix R
add suffix A

add suffix LL
add suffix X
add suffix H

YOKE TYPE Caged & Full Complement

SMITH
McGILL
Caged

Full
Complement

MYR-5
MYR-6
MYR-8
MYR-10
MYR-12
MYR-15
MYR-17
MYR-20
MYR-25
MYR-30
MYR-35
MYR-40
MYR-45
MYR-50

MYRV-5
MYRV-6
MYRV-8
MYRV-10
MYRV-12
MYRV-15
MYRV-17
MYRV-20
MYRV-25
MYRV-30
MYRV-35
MYRV-40
MYRV-45
MYRV-50

Caged
MCYRR-5
MCYRR-6
MCYRR-8
MCYRR-10
MCYRR-12
MCYRR-15
MCYRR-17
MCYRR-20
MCYRR-25
MCYRR-30
MCYRR-35
MCYRR-40
MCYRR-45
MCYRR-50

www.smithbearing.com

Full
Complement
MCYR-5
MCYR-6
MCYR-8
MCYR-10
MCYR-12
MCYR-15
MCYR-17
MCYR-20
MCYR-25
MCYR-30
MCYR-35
MCYR-40
MCYR-45
MCYR-50

INA SKF NTN

Caged
NATR-5
NATR-6
NATR-8
NATR-10
NATR-12
NATR-15
NATR-17
NATR-20
NATR-25
NATR-30
NATR-35
NATR-40
NATR-45
NATR-50

IKO THK

Full
Complement

Caged

NATV-5
NATV-6
NATV-8
NATV-10
NATV-12
NATV-15
NATV-17
NATV-20
NATV-25
NATV-30
NATV-35
NATV-40

NATV-50

NART-5R
NART-6R
NART-8R
NART-10R
NART-12R
NART-15R
NART-17R
NART-20R
NART-25R
NART-30R
NART-35R
NART-40R
NART-45R
NART-50R

tel. 800.932.0076 fax. 908.789.9429

Full
Complement
NART-5VR
NART-6VR
NART-8VR
NART-10VR
NART-12VR
NART-15VR
NART-17VR
NART-20VR
NART-25VR
NART-30VR
NART-35VR
NART-40VR
NART-45VR
NART-50VR

43

Smith-Trax

INCH & METRIC SIZES

Introduction
SMITH-TRAX were designed for applications with
a combination of both radial and axial loads. The
SMITH-TRAX Bearings use tapered roller bearings or
deep groove ball bearings to handle this combination
of radial and thrust loads. This bearing system is
considerable more effective at supporting axial loads
than needle rollers found in standard cam followers.
Special seals are used in SMITH-TRAX Bearings so
they can be used in contaminated environments. A
metal expansion plug closes off the back end of the
bearing to allow for a large lubrication reservoir.
SMITH-TRAX Bearings are available in Inch and
Metric sizes in Stud or Yoke Type versions. There are 4
different configurations available to meet a wide
range of applications available:
Plain O.D. Handle thrust or radial loads. Load can ride
against O.D. or face of bearing.
Flanged O.D. Designed for side guiding, where the
intended load can ride up against the flange.
V-Groove Designed for operation on V-shaped tracks.
V-shaped tracks will not allow contaminants to build
up as easily as they would on a flat and level track.
U-Groove Are commonly used for wire guiding
applications and are custom made to order.

44

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

S M I T H

B E A R I N G

PCR Plain Stud Type

S M I T H - T R A X

Inch Sizes
Smith-Trax

FCR Flange Stud Type

VCR V-Grooved Stud Type

UCR U-Grooved Stud Type

PYR Plain Yoke Type

FYR Flanged Yoke Type

VYR V-Grooved Yoke Type

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

5445

S M I T H - T R A X

INCH SIZES

PCR
Plain Stud Type
SMITH-TRAX

M
1/16 Ref.

R
S

H (Hex)

T (Thread)

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing
BB-Ball Bearing

46

D
Roller
O.D.
+.000
-.001

B
Roller
Width

A
Stud
Diameter
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min

T
Thread
U.N.F.
Class
2A

H
Hex
Size

R
Shoulder
Width
or End
Plate
Diameter

Radial
Basic
Dynamic
Rating (lbs)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (lbs)
500 hrs.
33 rpm.

Max
Static
Capacity
(lbs)

PCR-11/2

BB

1.500

1.187

.625

11/2

3/4

5/8-18

5/16

0.750

2,520

1,320

1,370

PCR-13/4

BB

1.750

1.187

.750

13/4

7/8

3/4-16

5/16

1.000

2,520

1,320

1,370

PCR-2

BB

2.000

1.687

.875

11/8

7/8-14

5/16

1.000

3,490

1,830

2,000

PCR-21/4

BB

2.250

1.687

.875

11/8

7/8-14

5/16

1.000

3,490

1,830

2,000

PCR-21/2

BB

2.500

1.687

1.000

21/4

11/2

1-14

7/16

1.250

5,120

2,680

3,120

PCR-23/4

BB

2.750

1.687

1.000

21/4

11/2

1-14

7/16

1.250

5,120

2,680

3,120

PCR-3

TRB

3.000

2.000

1.250

21/2

13/4

11/4-12

1/2

1.750

14,300

5,790

16,000

PCR-31/4

TRB

3.250

2.000

1.250

21/2

13/4

11/4-12

1/2

1.750

14,300

5,790

16,000

PCR-31/2

TRB

3.500

2.000

1.250

23/4

13/4

11/4-12

1/2

1.750

14,300

5,790

16,000

PCR-4

TRB

4.000

2.000

1.250

23/4

13/4

11/4-12

1/2

1.750

14,300

5,790

16,000

PCR-41/2

TRB

4.500

2.000

1.250

23/4

13/4

11/4-12

1/2

1.750

14,300

5,790

16,000

PCR-5

TRB

5.000

3.000

2.000

41/2

21/2

2-12

5/8

3.250

35,800

13,300

40,000

PCR-6

TRB

6.000

3.000

2.500

51/2

31/4

21/2-12

5/8

3.250

35,800

14,200

62,000

PCR-7

TRB

7.000

3.000

2.500

51/2

31/4

21/2-12

5/8

3.250

35,800

14,200

62,000

PCR-8

TRB

8.000

3.000

2.500

51/2

31/4

21/2-12

5/8

3.250

35,800

14,200

62,000

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

S M I T H - T R A X

FCR
Flanged Stud Type

1/16 Ref.
R

SMITH -TRAX

H (Hex)
S

T (Thread)

20
FB

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found
in certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

D
Roller
O.D.

F
Flange
O.D.

B
Roller
Width

FB
Flange
Width

A
Stud
Dia.
+.000
-.001

M
Stud
Length

S
Eff.
Thread
Min

T
Thread
U.N.F.
Class
2A

H
Hex
Size

1.500

23/16

13/16

11/
32

.625

11/2

3/4

5/8-18

5/16

3/4

2,520

1,320

1,370

111/16

11/
32

.750

13/4

7/8

3/4-16

5/16

2,520

1,320

1,370

.875

11/8

7/8-14

5/16

3,490

1,830

2,000

7/8-14

5/16

3,490

1,830

2,000

1-14

7/16

11/4

5,120

2,680

3,120

5,120

2,680

3,120

BB-Ball Bearing
FCR-11/2

BB

R
Radial
Shoulder
Basic
or
Dynamic
End
Rating (lbs)
Plate
500 hrs.
Dia.
33 rpm.

Dynamic
Max
Thrust
Static
Load
Capacity
Rating (lbs) (lbs)
500 hrs.
33 rpm.

FCR-13/4

BB

1.750

27/16

FCR-2

BB

2.000

211/16

111/16

19/
32

111/16

19/
32

.875

11/8

1.000

21/4

11/2
11/2

1-14

7/16

11/4

1/2

13/4

14,300

5,790

16,000

14,300

5,790

16,000

FCR-21/4

BB

2.250

215/16

FCR-21/2

BB

2.500

33/16

111/16

19/
32

111/16

19/
32

1.000

21/4

19/
32

1.250

21/2

13/4

11/4-12

1.250

21/2

13/4

11/4-12

1/2

13/4

1.250

23/4

13/4

11/4-12

1/2

13/4

14,300

5,790

16,000

13/4

11/4-12

1/2

13/4

14,300

5,790

16,000

11/4-12

1/2

13/4

14,300

5,790

16,000

35,800

13,300

40,000

FCR-23/4

BB

2.750

37/16

FCR-3

TRB

3.000

315/16

19/
32

19/
32

1.250

23/4

1.250

23/4

13/4
21/2

2-12

5/8

31/4

5/8

31/4

35,800

14,200

62,000

35,800

14,200

62,000

35,800

14,200

62,000

FCR-31/4

TRB

3.250

43/16

FCR-31/2

TRB

3.500

47/16

19/
32

19/
32

2.000

41/2

2.500

51/2

31/4

21/2-12

31/4

21/2-12

5/8

31/4

31/4

21/2-12

5/8

31/4

FCR-4

TRB

4.000

415/16

FCR-41/2

TRB

4.500

57/16

23/
32

23/
32

2.500

51/2

2.500

51/2

FCR-5

TRB

5.000

515/16

FCR-6

TRB

6.000

615/16

23/
32

23/
32

FCR-7

TRB

7.000

715/16

FCR-8

TRB

8.000

815/16

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

47

S M I T H - T R A X

INCH SIZES

VCR
V-Groove Stud Type

M
1/16 Ref.

90

SMITH-TRAX

R
H (Hex)

T (Thread)

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings
should be used when standard needle roller bearings are not sufficient to handle the thrust load
found in certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

D
Outside
Roller
O.D.

V
Point
Dia.

B
Roller
Width

C
Groove
Center

A
Stud
Dia.
+.001
-.000

M
Stud
Length

S
Eff.
Thread
Min

T
Thread
U.N.F.
Class
2A

H
Hex
Size

BB-Ball Bearing

48

R
Radial
Dynamic
Max
Shoulder
Basic
Thrust
Static
or
Dynamic
Load
Capacity
End
Rating (lbs) Rating (lbs) (lbs)
Plate
500 hrs.
500 hrs.
Dia.
33 rpm.
33 rpm.

VCR-31/2

BB

3.500

2.250

111/16

7/8

0.875

11/8

7/8-14

5/16

3,490

1,830

2,000

VCR-41/2

TRB

4.500

3.000

1.250

21/2

13/4

11/4-12

1/2

13/4

14,300

5,790

16,000

VCR-51/2

TRB

5.500

4.000

1.250

23/4

13/4

11/4-12

1/2

13/4

15,300

5,790

16,000

VCR-61/2

TRB

6.500

5.000

11/2

2.000

41/2

21/2

2-12

5/8

31/4

35,800

13,300

40,000

VCR-71/2

TRB

7.500

6.000

11/2

2.500

51/2

31/4

21/2-12

5/8

31/4

35,800

14,200

62,000

VCR-81/2

TRB

8.500

7.000

11/2

2.500

51/2

31/4

21/2-12

5/8

31/4

35,800

14,200

62,000

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

INCH SIZES

S M I T H - T R A X

UCR
U-Grooved Stud Type

SMITH-TRAX

1/16 Ref.
R
H (Hex)

T (Thread)

RAD

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found
in certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

D
Outside
Roller
BBO.D.
Ball Bearing

RAD

Groove
Dia.

Roller
Width

Groove
Center

Groove
Width

Groove
Radius

BEARING TYPE

SMITH
Bearing
Number

A
Stud
Dia.
+.000
-.001

M
Stud
Length

S
Eff.
Thread
Min

T
Thread
U.N.F.
Class
2A

H
R
Radial
Dynamic
Max
Hex Shoulder
Basic
Thrust
Static
Size
or
Dynamic
Load
Capacity
End Rating (lbs) Rating (lbs) (lbs)
Plate
500 hrs.
500 hrs.
Dia.
33 rpm.
33 rpm.

UCR-215/16 - 1

BB

215/16

25/16

111/16

7/8

.263

0.1315

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 2

BB

215/16

25/16

111/16

7/8

.242

0.1210

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 3

BB

215/16

23/8

111/16

7/8

.224

0.1120

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 4

BB

215/16

23/8

111/16

7/8

.207

0.1035

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 5

BB

215/16

27/16

111/16

7/8

.184

0.0920

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 6

BB

215/16

21/2

111/16

7/8

.169

0.0845

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 7

BB

215/16

21/2

111/16

7/8

.152

0.0760

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 8

BB

215/16

29/16

111/16

7/8

.138

0.0690

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 9

BB

215/16

25/8

111/16

7/8

.124

0.0620

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

UCR-215/16 - 10

BB

215/16

25/8

111/16

7/8

.113

0.0565

0.875

11/8

7/8-14

3/8

3,490

1,830

2,000

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

49

S M I T H - T R A X

INCH SIZES

PYR
Plain Yoke Type
W

SMITH-TRAX

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

BEARING TYPE

D
Roller
O.D.
+.000
-.001

B
Roller
Width

A
Bore
Diameter
+.0005 *
-.0000

W
Overall
Width
+.005
-.010

R
Shoulder
or
End Plate
Diameter

Radial
Basic
Dynamic
Rating (lbs)
500 hrs.
33 rpm.

TRB

3.000

1.750

1.000

1.813

13/4

14,300

5,790

PYR-31/4

TRB

3.250

1.750

1.000

1.813

13/4

14,300

5,790

PYR-31/2

TRB

3.500

2.000

1.125

2.063

17,600

5,790

PYR-4

TRB

4.000

2.250

1.250

2.313

21/2

17,600

5,790

PYR-5

TRB

5.000

2.750

1.750

2.875

31/2

33,300

13,300

PYR-6

TRB

6.000

3.250

2.250

3.375

31/2

35,800

14,200

PYR-7

TRB

7.000

3.750

*2.750

3.875

41/4

42,400

17,400

PYR-8

TRB

8.000

4.250

*3.255

4.500

43/4

83,700

39,000

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

PYR-3

*Tolerance on A Bore Diameter for PYR-7 and PYR-8 is (+0.001/-0.000)

50

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Dynamic
Thrust
Load
Rating(lbs)
500 hrs.
33 rpm.

INCH SIZES

S M I T H - T R A X

FYR
Flanged Yoke Type

SMITH-TRAX

20
FB

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.
Dimensional Data (inches)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

D
Roller
O.D.

F
Flange
O.D.

B
Roller
Width

FB
Flange
Width

A
Bore
Diameter
+.0005 *
-.0000

W
Overall
Width
+.005
-.010

R
Shoulder
or End
Plate
Diameter

Radial
Basic
Dynamic
Rating (lbs)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (lbs)
500 hrs.
33 rpm.

FYR-3

TRB

3.000

315/16

1.750

19/
32

1.000

1.812

13/4

14,300

5,790

FYR-31/4

TRB

3.250

43/16

1.750

19/
32

1.000

1.812

13/4

14,300

5,790

FYR-31/2

TRB

3.500

47/16

2.000

19/
32

1.125

2.062

17,600

5,790

FYR-4

TRB

4.000

415/16

2.250

19/
32

1.250

2.312

21/4

17,600

5,790

FYR-5

TRB

5.000

515/16

2.750

23/
32

1.750

2.875

31/2

33,300

13,300

FYR-6

TRB

6.000

615/16

3.250

23/
32

2.250

3.375

31/2

35,800

14,200

FYR-7

TRB

7.000

715/16

3.750

23/
32

*2.750

3.875

41/4

42,400

17,400

FYR-8

TRB

8.000

815/16

4.250

23/
32

*3.255

4.500

43/4

83,700

39,000

*Tolerance on A Bore Diameter for FYR-7 and FYR-8 is (+0.001/-0.000)

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

51

S M I T H - T R A X

INCH SIZES

VYR
V-Groove Yoke Style

W
B
90

SMITH-TRAX

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (inches)

D
Roller
O.D.

B
Roller
Width

A
Bore
Diameter
+.0005 *
-.0000

W
Overall
Width
+.005
-.010

V
Point
Diameter

C
Groove
Center

R
Shoulder
or
End Plate
Diameter
33 rpm.

Radial
Basic
Dynamic
Rating (lbs)
500 hrs.
33 rpm.

TRB

4.500

1.750

1.000

1.813

3.000

0.906

1.75

14,300

5,790

VYR-5

TRB

5.000

2.000

1.125

2.063

3.500

1.031

2.00

17,600

5,790

VYR-51/2

TRB

5.500

2.250

1.250

2.313

4.000

1.156

2.25

17,600

5,790

VYR-61/2

TRB

6.500

2.750

1.750

2.875

5.000

1.438

3.50

35,800

14,200

VYR-71/2

TRB

7.500

3.250

2.250

3.375

6.000

1.688

3.50

35,800

14,200

VYR-81/2

TRB

8.500

3.750

*2.750

3.875

7.000

1.938

4.25

42,400

17,400

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

VYR-41/2

*Tolerance on A Bore Diameter for VYR-81/2 is (+0.001/-0.000)

52

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Dynamic
Thrust
Load
Rating (lbs)
500 hrs.

S M I T H

B E A R I N G

S M I T H - T R A X

Metric Sizes
Smith-Trax

MPCR Plain Stud Type

MFCR Flange Stud Type

MVCR V-Grooved Stud Type

MPYR Plain Yoke Type

MFYR Flanged Yoke Type

MVYR V-Grooved Yoke Type

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

53

S M I T H - T R A X

METRIC SIZES

MPCR
Plain Stud Style

M
1.6 Ref.
R

SMITH-TRAX

H (Hex)

T (Thread)

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (mm)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing
BB-Ball Bearing

54

D
Roller
O.D.
+0.00
-0.02

B
Roller
Width

A
Stud
Diameter
+0.00
-0.02

M
Stud
Length

S
Eff.
Thread
Min

T
Thread

H
Hex
Size

R
Shoulder
Width
or End
Plate
Diameter

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.
33 rpm.

Max
Static
Capacity
(N)

MPCR-26

BB

26

20.0

10

23.0

13

M10 X 1

13.1

2,790

1,720

1,000

MPCR-30

BB

30

20.0

12

25.0

14

M12 X 1.5

15.9

2,790

1,720

1,000

MPCR-32

BB

32

22.0

12

25.0

14

M12 X 1.5

15.9

6,000

3,700

2,680

MPCR-35

BB

35

22.0

16

32.5

18

M16 X 1.5

19.1

6,000

3,700

2,680

MPCR-40

BB

40

30.0

14

40.0

26

M14 X 2

18.0

12,200

7,560

4,900

MPCR-47

BB

47

27.6

20

40.5

21

M20 X 1.5

25.5

12,200

7,560

4,900

MPCR-50

TRB

50

40.0

16

50.0

35

M16 X 2

23.0

17,000

10,600

7,200

MPCR-52

TRB

52

33.6

20

40.5

21

M20 X 1.5

25.5

17,000

10,600

7,200

MPCR-62

TRB

62

44.0

24

58.0

35

M24 X 3

32.0

23,100

14,200

10,100

MPCR-72

TRB

72

44.0

24

49.5

25

M24 X 1.5

32.0

48,400

17,840

33,900

MPCR-76

TRB

76

52.0

30

69.5

40

M30 X 3.5

44.5

63,600

25,700

89,000

MPCR-80

TRB

80

52.0

30

69.5

40

M30 X 3.5

44.5

63,600

25,700

89,000

MPCR-85

TRB

85

52.0

30

69.5

40

M30X 3.5

44.5

63,600

25,700

89,000

MPCR-90

TRB

90

52.0

30

69.5

40

M30X 3.5

44.5

63,600

25,700

89,000

MPCR-100

TRB

100

52.0

30

80.0

50

M30X 3.5

44.5

63,600

25,700

89,000

MPCR-125

TRB

125

76.0

48

105.0

60

M48 X 5

12

82.5

148,100

58,500

238,000

MPCR-150

TRB

150

76.0

64

140.0

82

M64 X 6

12

82.5

159,000

63,000

251,000

MPCR-200

TRB

200

76.0

64

140.0

82

M64 X 6

12

82.5

159,000

63,000

251,000

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

METRIC SIZES

S M I T H - T R A X

MFCR
Flanged Stud Type

1.6 Ref.
R

H (Hex)

SMITH-TRAX

T (Thread)

20
FB

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found
in certain applications. Consult our Engineering Department for special requirements.
Dimensional Data (mm)

SMITH
Bearing
Number

BEARING TYPE
TRB-Tapered
Roller Bearing

D
Roller
O.D.

F
Flange
O.D.

B
Roller
Width

FB
Flange
Width

A
Stud
Dia.
+0.00
-0.02

M
Stud
Length

S
Eff.
Thread
Min.

T
Thread

H
Hex
Size

R
Shoulder
or
End
Plate
Dia.

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.
33 rpm.

BB-Ball Bearing

Max
Static
Capacity
(N)

MFCR-26

BB

26

35

20

10,000

23

13

M10 x 1

13.1

2,790

1,720

1,000

MFCR-30

BB

30

40

20

12,000

25

14

M1 x 1.5

15.9

2,790

1,720

1,000

MFCR-32

BB

32

42

23

12,000

25

14

M12x 1.5

15.9

6,000

3,700

2,680

MFCR-35

BB

35

46

23

16,000

32.55

18

M16x 1.5

19.1

6,000

3,700

2,680

MFCR-40

BB

40

54

30.0

8.8

146,000

40

26

M14 x 2

18

12,200

7,560

4,900

MFCR-47

TRB

47

61

27.6

7.8

20,000

40.5

21

M20x1.5

25.5

12,200

7,560

4,900

MFCR-50

TRB

50

68

40

14

16,000

50

35

M16 x 2

23

17,000

10,600

7,200

MFCR-52

TRB

52

66

33.6

10.8

20,000

40.5

21

M20x1.5

25.5

17,000

10,600

7,200

MFCR-62

TRB

62

78

44

14

24,000

58

35

M24 x 3

32

23,100

14,200

10,100

MFCR-72

TRB

72

90

44

14

24,000

49.5

25

M24 x 3

32

23,100

14,200

10,100

MFCR-76

TRB

76

98

52

14

30,000

69.5

40

M30x3.5

44.5

63,600

25,700

89,000

MFCR-80

TRB

80

102

52

14

30,000

69.5

40

M30x3.5

44.5

63,600

25,700

89,000

MFCR-85

TRB

85

107

52

14

30,000

69.5

40

M30x3.5

44.5

63,600

25,700

89,900

MFCR-90

TRB

90

112

52

14

30,000

69.5

40

M30x3.5

44.5

63,600

25,700

89,900

MFCR-100

TRB

100

125

52

14

30,000

80

50

M30x3.5

44.5

63,600

25,700

89,900

MFCR-125

TRB

125

148

76

18

48,000

105

60

M48 x 5

12

82.5

148,100

58,500

230,800

MFCR-150

TRB

150

173

76

18.3

64,000

140

82

M64 x 6

12

82.5

159,000

63,000

251,000

MFCR-200

TRB

200

223

76

18.3

64,000

140

82

M64 x 6

12

82.5

159,000

63,000

251,000

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

55

S M I T H - T R A X

METRIC SIZES

MVCR
V-Groove Stud Style

M
1.6 Ref.

90

SMITH-TRAX

H (Hex)

T (Thread)

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (mm)

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

D
Outside
Roller
O.D.

V
Point
Dia.

B
Roller
Width

C
Groove
Center

A
Stud
Dia.
+0.00
-0.02

M
Stud
Length

BB-Ball Bearing

56

S
Eff.
Thread
Min.

T
Thread

H
Hex
Size

R
Shoulder
or
End
Plate
Dia.

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.
33 rpm.

Max
Static
Capacity
(N)

MVCR-26

BB

40

26

20

10

10

23.0

13

M10 x 1

13.1

2,790

1,720

1,000

MVCR-32

BB

50

32

22

11

12

25.0

14

M12 x 1.5

15.9

6,000

3,700

2,680

MVCR-40

BB

60

40

33

17

17

40.0

26

M14 x 2

18

6,000

3,700

2,680

MVCR-62

TRB

90

62

44.5

23

24

58.0

35

M24 x 3

32

23,100

14,200

10,100

MVCR-76

TRB

120

76

50.5

26

30

69.5

40

M30 x 3.5

44.5

63,600

25,700

89,000

MVCR-100

TRB

140

100

50.5

26

30

80.0

50

M30 x 3.5

44.5

63,600

25,700

89,000

MVCR-125

TRB

165

125

76

37.8

48

105.0

50

M48 x 5

12

82.5

148,100

58,500

230,800

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

METRIC SIZES

S M I T H - T R A X

MPYR
Plain Yoke Style

W
B

SMITH-TRAX

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found
in certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (mm)

D
Roller
O.D.
+0.00
-0.02

B
Roller
Width

A
Bore
Diameter
+0.00
-0.02

W
Overall
Width

R
Shoulder
or
End Plate
Diameter

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.
33 rpm.

TRB

62

38

20

40

32.00

48,400

17,800

MPYR-76

TRB

76

44

25

46

44.50

63,500

25,700

MPYR-80

TRB

80

44

25

46

44.50

63,500

25,700

MPYR-85

TRB

85

44

25

46

44.50

63,500

25,700

MPYR-90

TRB

90

54

30

56

57.20

78,200

25,600

MPYR-100

TRB

100

54

30

56

57.20

78,200

25,600

MPYR-125

TRB

125

68

45

71

82.60

148,100

58,500

MPYR-150

TRB

150

70

55

73

88.90

159,000

63,000

MPYR-200

TRB

125

68

45

71

82.60

148,100

58,500

MPYR-250

TRB

150

70

55

73

88.90

159,000

63,000

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

MPYR-62

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

57

S M I T H - T R A X

METRIC SIZES

MFYR
Flange Yoke Style

W
B

SMITH-TRAX

20
FB

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings should
be used when standard needle roller bearings are not sufficient to handle the thrust load found in
certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (mm)

58

D
Roller
O.D.

F
Flange
O.D.

B
Roller
Width

A
Bore
Diameter
+0.00
-0.02

W
Overall
Width

R
Shoulder
or End
Plate
Diameter

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.
33 rpm.

Max
Static
Capacity
(Newtons)

TRB

62

78

38

14

20

40

32.0

48,400

178,00

20,300

MFYR-76

TRB

76

98

44

13.5

25

46

44.5

63,500

25,700

53,400

MFYR-80

TRB

80

102

44

13.5

25

46

44.5

63,500

25,700

53,400

MFYR-85

TRB

85

107

44

13.5

25

46

44.5

63,500

25,700

53,400

MFYR-90

TRB

90

112

54

13.5

30

56

57.2

78,200

25,600

58,300

MFYR-100

TRB

100

122

54

13.5

30

56

57.2

78,200

25,600

58,300

MFYR-125

TRB

125

148

68

18.2

45

71

82.6

148,100

58,500

144,600

MFYR-150

TRB

150

173

70

18.3

55

73

88.9

159,000

63,000

147,000

MFYR-200

TRB

200

223

76

18.2

70

79

108.0

188,600

77,400

215,000

MFYR-250

TRB

250

273

76

18.2

70

79

108.0

188,600

77,400

215,00

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

MFYR-62

FB
Flange
Width

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

METRIC SIZES

S M I T H - T R A X

MVYR
V-Groove Yoke Style

W
B
90

SMITH-TRAX

General Information
The Smith-Trax Series bearings are designed and manufactured to handle increased axial and
radial loads by using Tapered Roller Bearings or Deep Groove Ball Bearings. These bearings
should be used when standard needle roller bearings are not sufficient to handle the thrust load
found in certain applications. Consult our Engineering Department for special requirements.

Dimensional Data (mm)

B
Groove
Dia.

A
Bore
Diameter
+0.00
-0.02

W
Overall
Width

90

38

20

40

62

22

TRB

110

44

25

46

76

MVYR-100

TRB

140

54

30

56

MVYR-125

TRB

165

68

45

MVYR-150

TRB

190

70

MVYR-200

TRB

240

MVYR-250

TRB

290

BEARING TYPE

SMITH
Bearing
Number

TRB-Tapered
Roller Bearing

MVYR-62

TRB

MVYR-76

D
Roller
O.D.

Radial
Basic
Dynamic
Rating (N)
500 hrs.
33 rpm.

Dynamic
Thrust
Load
Rating (N)
500 hrs.

32.0

48,400

17,800

23

44.5

63,600

25,700

100

28

57.2

78,200

25,600

71

125

36

82.6

148,100

58,500

55

73

150

37

88.9

159,200

63,000

76

70

79

200

40

108.0

188,600

77,400

76

70

79

250

40

108.0

188,600

77,400

www.smithbearing.com

V
Point
Diameter

C
Groove
Center

tel. 800.932.0076 fax. 908.789.9429

R
Shoulder
or
End Plate
Diameter
33 rpm.

59

SMITH-TRAX Interchange

INCH SIZES
PCR

FCR

VCR

UCR

PYR

VYR

FYR

Tr a c k R o l l e r B e a r i n g s

Yo k e Tr a c k R o l l e r B e a r i n g s

Plain Track Rollers

Plain Yoke Rollers

SMITH
PCR-1-1/2
PCR-1-3/4
PCR-2
PCR-2-1/4
PCR-2-3/4
PCR-3
PCR-3-1/4
PCR-3-1/2
PCR-4
PCR-4-1/2
PCR-5
PCR-6
PCR-7
PCR-8

McGill
PCF-1-1/2
PCF-1-3/4
PCF-2
PCF-2-1/4
PCF-2-3/4
PCF-3
PCF-3-1/4
PCF-3-1/2
PCF-4
PCF-4-1/2
PCF-5
PCF-6
PCF-7
PCF-8

Osborn

PCI

PLR-1-1/2
PLR-1-3/4
PLR-2
PLR-2-1/4
PLR-2-3/4
PLR-3
PLR-3-1/4
PLR-3-1/2
PLR-4
PLR-4-1/2
PLR-5
PLR-6
PLR-7
PLR-8

PTR-1.50
PTR-1.75
PTR-2.00
PTR-2.25
PTR-2.75
PTR-3.00
PTR-3.25
PTR-3.50
PTR-4.00
PTR-4.50
PTR-5.00
PTR-6.00
PTR-7.00
PTR-8.00

McGill

Osborn

PCI

FCF-1-1/2
FCF-1-3/4
FCF-2
FCF-2-1/4
FCF-2-1/2
FCF-2-3/4
FCF-3
FCF-3-1/4
FCF-3-1/2
FCF-4
FCF-4-1/2
FCF-5
FCF-6
FCF-7
FCF-8

FLR-1-1/2
FLR-1-3/4
FLR-2
FLR-2-1/4
FLR-2-1/2
FLR-2-3/4
FLR-3
FLR-3-1/4
FLR-3-1/2
FLR-4
FLR-4-1/2
FLR-5
FLR-6
FLR-7
FLR-8

FTR-1.50
FTR-1.75
FTR-2.00
FTR-2.25
FTR-2.50
FTR-2.75
FTR-3.00
FTR-3.25
FTR-3.50
FTR-4.00
FTR-4.50
FTR-5.00
FTR-6.00
FTR-7.00
FTR-8.00

Flanged Track Rollers

SMITH
FCR-1-1/2
FCR-1-3/4
FCR-2
FCR-2-1/4
FCR-2-1/2
FCR-2-3/4
FCR-3
FCR-3-1/4
FCR-3-1/2
FCR-4
FCR-4-1/2
FCR-5
FCR-6
FCR-7
FCR-8

SMITH

Osborn

PCI

PYR-3
PYR-3-1/4
PYR-3-1/2
PYR-4
PYR-5
PYR-6
PYR-7
PYR-8

PLRY-3
PLRY-3-1/4
PLRY-3-1/2
PLRY-4
PLRY-5
PLRY-6
PLRY-7
PLRY-8

PTRY-3.00
PTRY-3.25
PTRY-3.50
PTRY-4.00
PTRY-5.00
PTRY-6.00
PTRY-7.00
PTRY-8.00

Flanged Yoke Rollers

SMITH

Osborn

PCI

FYR-3
FYR-3-1/4
FYR-3-1/2
FYR-4
FYR-5
FYR-6
FYR-7
FYR-8

FLRY-3
FLRY-3-1/4
FLRY-3-1/2
FLRY-4
FLRY-5
FLRY-6
FLRY-7
FLRY-8

FTRY-3.00
FTRY-3.25
FTRY-3.50
FTRY-4.00
FTRY-5.00
FTRY-6.00
FTRY-7.00
FTRY-8.00

V-Grooved Yoke Rollers

SMITH

Osborn

VYR-4-1/2
VYR-5-1/2
VYR-6-1/2
VYR-7-1/2
VYR-8-1/2

VLRY-4-1/2
VLRY-5-1/2
VLRY-6-1/2
VLRY-7-1/2
VLRY-8-1/2

PCI
VTRY-4.50
VTRY-5.50
VTRY-6.50
VTRY-7.50
VTRY-8.50

V-Grooved Track Rollers

SMITH

McGill

Osborn

PCI

VCR-3-1/2
VCR-4-1/2
VCR-5-1/2
VCR-6-1/2
VCR-7-1/2
VCR-8-1/2

VCF-3-1/2
VCF-4-1/2
VCF-5-1/2
VCF-6-1/2
VCF-7-1/2
VCF-8-1/2

VLR-3-1/2
VLR-4-1/2
VLR-5-1/2
VLR-6-1/2
VLR-7-1/2
VLR-8-1/2

VTR-3.50
VTR-4.50
VTR-5.50
VTR-6.50
VTR-7.50
VTR-8.50

U-Grooved Track Rollers

60

SMITH

McGill

Osborn

PCI

UCR-2-15/16-1
UCR-2-15/16-2
UCR-2-15/16-3
UCR-2-15/16-4
UCR-2-15/16-5
UCR-2-15/16-6
UCR-2-15/16-7
UCR-2-15/16-8
UCR-2-15/16-9
UCR-2-15/16-10

UCF-2-15/16-1
UCF-2-15/16-2
UCF-2-15/16-3
UCF-2-15/16-4
UCF-2-15/16-5
UCF-2-15/16-6
UCF-2-15/16-7
UCF-2-15/16-8
UCF-2-15/16-9
UCF-2-15/16-10

ULR-2-15/16-A
ULR-2-15/16-B
ULR-2-15/16-C
ULR-2-15/16-D
ULR-2-15/16-E
ULR-2-15/16-F
ULR-2-15/16-G
ULR-2-15/16-H
ULR-2-15/16-I
ULR-2-15/16-J

UTR-2.9375-A
UTR-2.9375-B
UTR-2.9375-C
UTR-2.9375-D
UTR-2.9375-E
UTR-2.9375-F
UTR-2.9375-G
UTR-2.9375-H
UTR-2.9375-I
UTR-2.9375-J

tel. 800.932.0076 fax. 908.789.9429

Coding for Other Track Rollers

Optional Feature

SMITH

Osborn

McGILL PCI

Eccentric Collar

add
suffix
E

add
prefix
E

add
prefix
E

www.smithbearing.com

add
prefix
E

METRIC SIZES
MVCR

MPYR

Tr a c k R o l l e r B e a r i n g s
Plain Track Rollers
SMITH
MPCR-26
MPCR-30
MPCR-32
MPCR-35
MPCR-40
MPCR-47
MPCR-50
MPCR-52
MPCR-62
MPCR-72
MPCR-76
MPCR-80
MPCR-85
MPCR-90
MPCR-100
MPCR-125
MPCR-150
MPCR-200

MVCR-26
MVCR-32
MVCR-40
MVCR-62
MVCR-76
MVCR-100
MVCR-125

MVYR

Yo k e Tr a c k R o l l e r B e a r i n g s
Plain Yoke Rollers

Osborn

SMITH

HPC-26
HPC-30
HPC-32
HPC-35
HPC-40
HPC-47
HPC-50
HPC-52
HPC-62
HPC-72
HPC-76
HPC-80
HPC-85
HPC-90
HPC-100
HPC-125
HPC-150
HPC-200

MPYR-62
MPYR-76
MPYR-80
MPYR-85
MPYR-90
MPYR-100
MPYR-125
MPYR-150
MPYR-200
MPYR-250

V-Grooved Track Rollers

SMITH

MFYR

Osborn
HPCA-62
HPCA-76
HPCA-80
HPCA-85
HPCA-90
HPCA-100
HPCA-125
HPCA-150
HIPCA-200
HPCA-250

V-Grooved Yoke Rollers

SMITH

Osborn

MVYR-62
MVYR-76
MVYR-100
MVYR-125
MVYR-150
MVYR-200
MVYR-250

HPVA-62
HPVA-76
HPVA-100
HPVA-125
HPVA-150
HPVA-200
HPVA-250

Osborn
HPV-26
HPV-32
HPV-40
HPV-62
HPV-76
HPV-100
HPV-125

Flanged Yoke Rollers

Flanged Track Rollers

SMITH

Osborn

MFCR-26
MFCR-30
MFCR-32
MFCR-35
MFCR-40
MFCR-47
MFCR-50
MFCR-52
MFCR-62
MFCR-72
MFCR-76
MFCR-80
MFCR-85
MFCR-90
MFCR-100
MFCR-125
MFCR-150
MFCR-200

HPJ-26
HPJ-30
HPJ-32
HPJ-35
HPJ-40
HPJ-47
HPJ-50
HPJ-52
HPJ-62
HPJ-72
HPJ-76
HPJ-80
HPJ-85
HPJ-90
HPJ-100
HPJ-125
HPJ-150
HPJ-200

www.smithbearing.com

SMITH

Osborn

MFYR-62
MFYR-76
MFYR-80
MFYR-85
MFYR-90
MFYR-100
MFYR-125
MFYR-150
MFYR-200
MFYR-250

HPJA-62
HPJA-76
HPJA-80
HPJA-85
HPJA-90
HPJA-100
HPJA-125
HPJA-150
HPJA-200
HPJA-250

SMITH-TRAX Interchange

MFCR

MPCR

Coding for Other Track Rollers

Optional Feature

SMITH

Osborn

Eccentric Collar

add
suffix
E

add
prefix
E

tel. 800.932.0076 fax. 908.789.9429

61

Ancillary Bearings

Ancillary Bearings

S M I T H

IRR Series
Inner Ring Races

GEZ Series
Spherical Plain
Bearings
with Fractured
Outer Race

YR Series
Yoke Type
Chain Rollers

62

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

B E A R I N G

Ancillary Bearings

W
H

IRR
INNER RING RACES

Dimensional Data (inches)

Bore Diameter I.D.

Outside Diameter

SMITH Bearing
Number

Nominal

Tolerance
+0.0000

Nominal

Tolerance
+0.0000

Width
+.000
-.005

Hole
Diameter

Max
Fillet
for
Shaft

IRR-1/2

.500

-0.0004

.7493

-0.0005

.760

1/8

.040

IRR-9/16

.5625

-0.0004

.7493

-0.0005

.760

1/8

.040

IRR-5/8

.625

-0.0004

.8743

-0.0005

.760

1/8

.040

IRR-11/16

.6875

-0.0004

.8743

-0.0005

.760

1/8

.040

IRR-3/4

.750

-0.0004

.9993

-0.0005

1.010

1/8

.040

IRR-13/16

.8125

-0.0005

.9993

-0.0005

1.010

1/8

.040

IRR-1

1.000

-0.0005

1.2491

-0.0006

1.010

1/8

.040

IRR-11/8

1.125

-0.0005

1.3741

-0.0006

1.010

1/8

.040

IRR-13/16

1.187

-0.0005

1.4990

-0.0006

1.260

1/8

.060

IRR-11/4

1.250

-0.0005

1.4990

-0.0006

1.260

1/8

.060

IRR-15/16

1.3125

-0.0005

1.6240

-0.0006

1.260

1/8

.060

IRR-13/8

1.375

-0.0005

1.6240

-0.0006

1.260

1/8

.060

IRR-17/16

1.4375

-0.0005

1.7490

-0.0006

1.260

1/8

.060

IRR-11/2

1.500

-0.0005

1.7490

-0.0005

1.260

1/8

.060

IRR-19/16

1.5625

-0.0005

1.8740

-0.0006

1.260

1/8

.060

IRR-15/8

1.625

-0.0005

1.9989

-0.0007

1.260

1/8

.060

IRR-111/16

1.6875

-0.0005

1.9989

-0.0007

1.260

1/8

.060

IRR-13/4

1.750

-0.0005

2.2489

-0.0007

1.760

3/16

.060

IRR-17/8

1.875

-0.0005

2.2489

-0.0007

1.760

3/16

.060

IRR-2

2.0000

-0.0005

2.2489

-0.0007

1.760

3/16

.080

INTERCHANGE Inner Ring Races

General Information
SMITH IRR Inner Ring Races are hardened and ground and are
used as bushings or sleeves. Typical material is 52100 Bearing Steel.
They are complete with radial oil holes and an annular lubrication
groove. Consult our Engineering Department for special configurations,
sizes and materials.

www.smithbearing.com

SMITH

McGill

RBC

IRR-1/2
IRR-9/16
IRR-5/8
IRR-11/16
IRR-3/4
IRR-13/16
IRR-1
IRR-11/8
IRR-13/16
IRR-11/4
IRR-15/16
IRR-13/8
IRR-17/16
IRR-11/2
IRR-19/16
IRR-15/8
IRR-111/16
IRR-13/4
IRR-17/8
IRR-2

MI-8-N
MI-9-N
MI-10-N
MI-11-N
MI-12
MI-13
MI-16-N
MI-18-N
MI-19
MI-20
MI-21
MI-22-4S
MI-23
MI-24
MI-25-4S
MI-26
MI-27
MI-28
MI-30
MI-32

IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR
IR

tel. 800.932.0076 fax. 908.789.9429

7153
7153
7173
7173
7194
7194
7234
7254
7275
7275
7295
7295
7315
7315
7335
7355
7355
8407
8407
8447

C
C
C

C
C
C
D

C1
C

25
63

Ancillary Bearings
W
B

YR
Yoke Type
Chain Rollers

For Shaft Mounting

30 Typ.
T

General Information
SMITH YR Special Chain Roller bearings are manufactured for various industrial applications.
Typical uses are in forklift style equipment or other chain guide applications which may require
a double-flanged outer ring design. The table shown is intended as a guide to indicate basic
typical sizes. Consult our Engineering Department for special design needs.
Dimensional Data (inches)

Basic

Number

Roller
O.D.
+.005
-.005

Flange
O.D.
+.005
-.005

Bore
Diameter
+.0003
-.0003

Roller
Width

Overall
Width

Track
Width

Minimum
Clamping
Diameter

Dynamic
Capacity
(Ibs)

YR-21/2-18

2.375

2.75

.7449

1.810

1.873

1.440

1.74

16,000

YR-21/2-28

2.375

2.75

.7685

1.810

1.870

1.440

1.74

16,000

YR-21/2-30

2.375

2.75

.7449

1.810

1.870

1.440

1.74

16,000

YR-6757-2

2.375

2.75

.7449

1.810

1.870

1.440

1.74

16,000

YR-6265-X

2.990

3.38

.7501

1.510

1.564

1.160

2.12

8,750

YR-6636-X

3.150

3.86

.9840

1.850

1.909

1.280

2.25

13,304

YR-6634-X

3.543

4.25

1.3780

1.850

1.909

1.280

2.75

15,432

YR-6757-1

3.745

4.12

.7449

1.810

1.870

1.440

1.74

16,000

YR-4-X-5

3.750

4.13

.7685

1.810

1.870

1.440

3.00

32,000

YR-6635

4.094

3.86

.9840

1.850

1.909

1.280

2.25

13,304

SMITH Bearing

64

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Ancillary Bearings
W
H

GEZ
Spherical Plain Bearings

S
D

Metal to Metal
Fractured Race

General Information
SMITH GEZ (inch size) and GE (metric size) Plain Spherical Bearings are assembled units, which consist
of a spherical O.D. inner ring and a spherical I.D. outer ring. Both inner and outer rings are phosphate
treated and coated with Molybdenum disulphide. Bearings are available in sealed versions.
For sealed bearings add suffix X (Example: GEZ12ES-X).

INCH Size Bearings

Dimensional Data (inches)

SMITH Bearing
Number

Bore
Diameter
+.0000
-.0005

Outer
Diameter
+.0000
-.0005

Race
Width
+.000
-.005

Overall
Ball Width
+.000
-.005

Ball
Flat Dia.
(Ref)

Race
Chamfer
(Min)

Ball
Diameter
(Ref)

Max
Mis-align
Angle

GEZ12ES

.5000

.875

.375

.437

.551

.032

.709

6.0

9,330

.044

GEZ15ES

.6250

1.0625

.469

.547

.703

.040

.906

6.0

14,726

.079

GEZ19ES

.7500

1.250

.562

.656

.844

.040

1.083

6.0

21,358

.126

GEZ22ES

.8750

1.4375

.656

.765

.974

.040

1.260

6.0

28,552

.193

GEZ25ES

1.0000

1.625

.750

.875

1.103

.040

1.417

6.0

37,320

.276

GEZ31ES

1.2500

2.000

.937

1.093

1.382

.040

1.772

6.0

58,453

.516

GEZ34ES

1.3750

2.1875

1.031

1.187

1.516

.040

1.929

6.0

69,694

.770

GEZ38ES

1.5000

2.4375

1.125

1.312

1.703

.040

2.165

6.0

84,308

.934

GEZ44ES

1.7500

2.8125

1.312

1.531

1.984

.040

2.520

6.0

114,658

1.430

GEZ50ES

2.0000

3.1875

1.500

1.750

2.266

.048

2.874

6.0

150,629

2.070

GEZ63ES

2.5000

3.9375

1.875

2.187

2.833

.048

3.583

6.0

236,061

4.090

GEZ69ES

2.7500

4.375

2.062

2.406

3.110

.048

3.937

6.0

281,025

5.380

GEZ76ES

3.0000

4.750

2.250

2.625

3.406

.048

4.331

6.0

337,230

6.870

METRIC Size Bearings

Max
Radial
Static Load
Capacity
(lbs)

Approx.
Weight
(lbs)

Dimensional Data (mm)

SMITH
Bearing
Number

Bore
Diameter
+.000
-.015

Outer
Diameter
+.000
-.015

Race
Width
+.00
-.15

Overall
Ball Width
+.00
-.15

Ball
Flat Dia.
(Ref)

Race
Chamfer
(Min)

Ball
Diameter
(Ref)

Max
Mis-align
Angle

Radial
Static Load
Capacity
(Newtons)

Approx.
Weight
(kilograms)

GE30ES

30

47

18

22

34

0.6

40.7

310,000

0.16

GE40ES

40

62

22

28

45

1.0

53.0

500,000

0.32

GE45ES

45

68

25

32

50

1.0

60.0

640,000

0.46

GE50ES

50

75

28

35

55

1.0

66.0

780,000

0.56

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

65

Aerospace Bearings

Introduction

Bearing Selection

Smith Aircraft Bearings presented in

this section have been designed to
meet the standards of the aerospace
industry and conform to military and
other appropriate national standards.
When selecting these bearings for your
application, it is recommended that you
review the engineering data provided,
along with any appropriate military or
national specifications.

YAF (MS21438) & YAT (MS21439)

YAF and YAT Series Yoke Type bearings
have heavy outer ring sections and were designed
for application as track rollers where the bearing
O.D. is unsupported. These bearings will support
heavy rolling or oscillating loads in cam or track
roller applications. The YAF-Series (single row)
needle bearings have a crowned outer race. The
YAT-Series (double row) needle bearings have
large blended outside corner radiuses to help
distribute stresses. The outer race is hard-chrome
plated and all other exposed surfaces are
cadmium plated for corrosion protection. These
bearings can be re-lubricated thru the inner ring
bore. When mounting, care should be taken to
properly support the end plates to eliminate the
possibility of bearing separation due to thrust loads.
These bearings are dimensionally interchangeable
with the corresponding YAD and YAS Series.

Smith Bearing has been a leader in

the design and manufacture of
specialized bearings for the unique
requirements of jet engines. We have
kept pace with the ever increasing
demands for anti-friction bearings to
operate at higher temperatures. Thrust
reversers, afterburners, and divergent
nozzles are some of the areas in which
Smith Bearing Bearings are currently
functioning. Contact our engineering
department for recommendations and
design assistance.

Military Qualifications
The products listed meet the
military requirements of Mil-B-3990
(SAE AS 39901)
Smith Aircraft Bearings are marked
with the bearing designation including
bearing type code. Many of these
bearings are supplied pre-lubricated to
meet the OEM's special requirements.
When ordering, attention must be paid
to the original manufacturers parts list
requirements so that proper
identification can be provided.

Federal Aviation
Administration Parts
Manufacturing Approval
FAA PMA
Smith manufactures bearings to meet
the provisions of the Federal Aviation
Regulations (FAR) for Parts
Manufacturing Approval (PMA).
Smith Bearing maintains an active
list identifying all of our FAA PMA parts
and where they are applicable. This list
is available upon request.

66

tel. 800.932.0076 fax. 908.789.9429

YAD (MS24465) & YAS (MS24466)

YAD and YAS Series Yoke Type bearings are
dimensionally similar to the YAF and YAT Series.
These bearings were designed for track roller
applications where the outer race of the bearing
is unsupported. They will handle heavy rolling or
oscillating motion. The outer race is hard-chrome
plated and all other exposed surfaces are
cadmium plated for corrosion protection. The
bearing is held together using a swedged ring
inserted around the inside of the end washers.
These bearings are generally considered for
replacement in existing applications. For new
applications and current designs use the
YAF and YAT Series.
YAG (MS24461)
YAG Series Yoke Type bearings were designed for
applications where the bearing is mounted inside
the housing. These bearings handle slow rotating or
oscillating motions. All external surfaces except the
bore are cadmium plated for corrosion protection.
The bearing is held together using a swedged ring
inserted around the inside of the end washer.
HRS (MS21432) & CHRS (MS21447)
HRS and CHRS Series Stud Type bearings are of
non-separable construction and are used in
applications involving high-static loads or oscillating
motion. The HRS-Series - straight cylindrical outer
race and the CHRS-Series - crowned outer race
were designed for airframe usage in flap tracks,
canopies, and landing gear. When misalignment is
a concern, the CHRS (crowned) Series is preferred.
The outer races are hard-chrome plated and all
other exposed surfaces are cadmium plated for
corrosion protection.

www.smithbearing.com

Aerospace Bearings

Load Ratings

Temperature

Aircraft Static Capacity (ASC)

is the maximum load which can be placed
on a housing mounted needle roller bearing
without seriously brinelling the raceways
(approx. 0.0001 inch deep) or deforming
the rolling elements.

Unsealed aircraft bearings can be operated

at temperatures up to 400 F provided that
suitable lubrication is present. Higher
temperature exposure will result in loss of
capacity. The operating temperature for
sealed bearings is limited to 250 F due to
the seal material.

Limit Load Rating

is the maximum static load that can be applied
without impairing the subsequent function of
the bearing.

Stainless Steel

Ultimate Static Fracture Load Rating

is a minimum of 1.5 times the Limit Load Rating
Track Roller Bearings
YAF, YAT, YAD, and YAS Series bearings are
designed for use as a Track Roller and therefore
operate with an unsupported outer race. For
this reason deformation of the outer race must
be taken into consideration. The dynamic
rating method used for track roller bearings is
the Rating as a Track Roller which equals
1/3 ASC (Aircraft Static Capacity). The
Limit Load Rating for track roller bearings
equals 4/9 ASC (Aircraft Static Capacity).

Smith Bearing produces Stainless Steel

airframe bearings which are dimensionally
interchangeable to our standard line of
bearings listed in this section. The special
grade of stainless steel used has extremely
high strength and corrosion resistance.
Material used is per AMS 5925 or AMS 5898
for inner races, outer races, studs and rolls
and AMS 5621 for end washers. Consult
our engineering department for exact
specifications and applications.

HRS and CHRS Series bearings with integral

stud are designed for use as a track roller.
For these bearings the Limit Load Rating
equals 2/3 ASC (Aircraft Static Capacity).

Housing Mounted Bearings:

YAG Series bearings must be mounted inside
a housing and are not used as a track roller.
For these types of bearings the Ultimate Load
Rating is equal to the ASC (Aircraft Static
Capacity). The Limit Load Rating equals
2/3 ASC (Aircraft Static Capacity).

Smith Aircraft & Military Bearings

SMITH Bearing
Model

Description

Military
Standard

SAE
Standard

ABMA
Number

NAS
Standard

YAF

Yoke Type Single Row Track Roller

MS21438

AS21438

N/A

N/A

YAT

Yoke Type Double Row Track Roller

MS21439

AS21439

N/A

N/A

YAD

Yoke Type Single Row Track Roller

MS24465

AS24465

NBF

NAS 502

YAS

Yoke Type Double Row Track Roller

MS24466

AS24466

NBL

NAS 503

YAG

Yoke Type Housing Mounted

MS24461

AS24461

NBC

NAS 505

HRS

Stud Type Track Roller

MS21432

AS21432

HRS

NAS 562

CHRS

Stud Type Crowned Track Roller

MS21447

AS21447

CHRS

N/A

www.smithbearing.com

tel. 800.932.0076 fax. 973.789.9429

67

A E R O S P A C E

B E A R I N G S

MS21438 (YAF SERIES)

Single Row

YAF

YAT
W

W
C

MS21439 (YAT SERIES)

Double Row

r
P

D d

P
A d

A
r

Cr

General Information
The YAF Single Row & YAT Double Row Series bearings are manufactured in accordance with
MS21438 & MS21439 standards. The bearings are used in track roller applications with each bearing
consisting of an inner race, outer race, needle rollers, end washers & thrust seals. Relubrication holes
and grooves are provided. For wear and corrosion protection the outer ring surface is hard-chrome
plated. Other exposed surfaces are cadmium or zinc-nickel plated. Inner rings may be black-oxide
coated. Consult our Engineering Department for further specific requirements and special designs.
These bearings can be produced from stainless steel grade AMS 5898 & AMS 5925.

SMITH
Bearing
Number

68

Military
Number
MS

A
Bore
+.0000
-.0007

D
W
Roller Overall
O.D.
Width
+.0000 +.000
-.0010 -.005

C
T
Outer Race Track
Width
Contact
+.000
Width
-.005
Min.

Cr
Crown
radius

d
Min.
Clamp
Dia.

P
Lube
Groove
Width

r
Radius

Limit Rating Track

Load
As A Capacity
Rating Track 40HRC
(lbf) Roller
(lbf)
(lbf)

Recommended Shaft Diameter

Slip Fit

Press Fit

Max

Min

Max

Min

Weight
Approx.
(lbs)

YAF-03

21438-103

0.1900

0.7500

0.312

0.280

10.000

0.438

3/32

0.022

1200

900

290

0.1894

0.1889

0.1902

0.1897

0.030

YAF-04

21438-104

0.2500

0.8750

0.375

0.345

10.000

0.516

1/8

0.022

1910

1430

575

0.2494

0.2489

0.2502

0.2497

0.051

YAF-06

21438-106

0.3750

1.0625

0.500

0.455

10.000

0.672

3/16

0.022

3600

2700

1000

0.3744

0.3739

0.3752

0.3747

0.103

YAF-08

21438-108

0.5000

1.3125

0.625

0.580

12.500

0.844

3/16

0.032

5780

4300

1785

0.4994

0.4989

0.5002

0.4997

0.187

YAF-10

21438-110

0.6250

1.5000

0.750

0.705

17.500

0.953

1/4

0.032

8530

6400

2600

0.6244

0.6239

0.6252

0.6247

0.279

YAF-12

21438-112

0.7500

1.7500

1.000

0.950

25.000

1.109

1/4

0.032

14200 10700

4050

0.7494

0.7489

0.7502

0.7497

0.520

YAF-14

21438-114

0.8750

2.0000

1.125

1.075

27.500

1.219

1/4

0.032

19300 14400

5350

0.8744

0.8739

87,526

0.8747

0.749

YAF-20

21438-120

1.2500

2.5000

1.250

1.200

30.000

1.625

3/8

0.032

25300 18900

7100

1.2494

1.2488

1.2503

1.2497

1.160

YAF-24

21438-124

1.5000

3.0000

1.500

1.440

60.000

1.984

3/8

0.032

37900 28400 10900

1.4994

1.4988

1.5003

1.4997

2.360

YAF-28

21438-128

1.7500

3.4375

1.500

1.440

60.000

2.281

3/8

0.032

44100 33000 12400

1.7494

1.7488

1.7503

1.7497

2.710

YAF-32

21438-132

2.0000

3.8750

1.500

1.440

60.000

2.562

3/8

0.032

48900 36700 14000

1.9994

1.9987

2.0003

1.9996

3.420

YAF-36

21438-136

2.2500

4.3125

1.500

1.440

60.000

2.859

3/8

0.032

55000 41200 15600

2.2494

2.2487

2.2503

2.2496

4.230

YAF-40

21438-140

2.5000

4.7500

1.500

1.440

60.000

3.109

3/8

0.032

59900 44900 17200

2.4994

2.4987

2.5003

2.4996

5.140

YAF-44

21438-144

2.7500

5.0000

1.500

1.440

60.000

3.344

3/8

0.032

64800 48600 18100

2.7494

2.7487

2.7503

2.7496

5.490

YAT-06

21439-106

0.3750

1.1250

1.000

0.940

0.750

0.672

3/16

0.032

7130

5370

2600

0.3744

0.3739

0.3752

0.3747

0.239

YAT-08

21439-108

0.5000

1.3750

1.250

1.190

1.000

0.891

1/4

0.032

12500

9370

4250

0.4994

0.4989

0.5002

0.4997

0.437

YAT-10

21439-110

0.6250

1.6250

1.500

1.440

1.125

1.109

3/8

0.032

19900 15000

5650

0.6244

0.6239

0.6252

0.6247

0.728

YAT-12

21439-112

0.7500

1.8750

1.750

1.690

1.375

1.281

3/8

0.032

28500 21400

7950

0.7494

0.7489

0.7502

0.7497

1.130

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

W
C

W
C
T

P
D E

MS24465 (YAD SERIES)

Single Row

YAD

YAS

MS24466 (YAS SERIES)

Double Row

P
P

E d A

d A

B E A R I N G S

General Information
The YAD Single Row & YAS Double Row Series bearings are manufactured in accordance with
MS24465 & MS24466 standards. The bearings are used in track roller applications with each bearing
consisting of an inner race, outer race, needle rollers, end washers & thrust seals. Relubrication holes
and grooves are provided. For corrosion protection the outer ring surface is hard chrome plated
while all other exposed surfaces are cadmium or zinc-nickel plated. Consult our Engineering
Department for further specific requirements and special designs.
Dimensional Data (inches)

SMITH
Bearing
Number

Military
Number
MS

ABMA
Number

A
Bore

D
W
C
T
E
Roller Overall Outer Race Track End
O.D. Width
Width Contact Ring
+.0000 +.0000 +.000
+.000
Width Dia.
-.0007 -.0010 -.005
-.005
Min

d
P
r
Limit Rating Track
Min. Lube Radius Load
As A Capacity
Clamp Groove or
Rating Track 40HRC
Dia. Width 45
(lbf) Roller
Chamfer
(lbf)
(lbf)

Recommended Shaft Diameter

Slip Fit

Press Fit

Max

Min

Max

Weight
Approx.
(lbs)

Min

YAD-03

24465-3

3NBF512YJ

0.1900

0.7500

0.312

0.218

0.125

0.688 0.438

3/32

0.022

1200

900

290

0.1894

0.1889

0.1902 0.1897 0.029

YAD-04

24465-4

4NBF614YJ

0.2500

0.8750

0.375

0.281

0.218

0.750 0.516

1/8

0.022

1910

1430

575

0.2494

0.2489

0.2502 0.2497 0.049

YAD-06

24465-6

6NBF817YJ

0.3750

1.0625

0.500

0.375

0.312

0.938 0.672

3/16

0.022

3600

2700

1000

0.3744

0.3739

0.3752 0.3747 0.980

YAD-08

24465-8

8NBF1012YJ

0.5000

1.3125

0.625

0.500

0.438

1.188 0.844

3/16

0.032

5780

4300

1785

0.4994

0.4989

0.5002 0.4997 0.178

YAD-10

24465-10 10NBF1224YJ

0.6250

1.5000

0.750

0.625

0.562

1.375 0.953

1/4

0.032

8530

6400

2600

0.6244

0.6239

0.6252 0.6247 0.266

YAD-12

24465-12 12NBF1628YJ

0.7500

1.7500

1.000

0.875

0.750

1.625 1.109

1/4

0.032 14200

10700

4050

0.7494

0.7489

0.7502 0.7497 0.495

YAD-14

24465-14 14NBF1832YJ

0.8750

2.0000

1.125

1.000

0.875

1.875 1.219

1/4

0.032 19300

14400

5350

0.8744

0.8739

0.8752 0.8747 0.713

YAD-20

24465-20 20NBF2040YJ

1.2500

2.5000

1.250

1.049

0.938

1.906 1.625

3/8

0.032 25300

18900

7100

1.2494

1.2488

1.2503 1.2497 1.060

YAD-24

24465-24 24NBF2448YJ

1.5000

3.0000

1.500

1.229

1.172

2.875 1.984

3/8

0.032 37900

28400

10900

1.4994

1.4988

1.5003 1.4997 2.070

YAD-28

24465-28 28NBF2455YJ

1.7500

3.4375

1.500

1.229

1.172

3.312 2.281

3/8

0.032 44100

33000

12400

1.7494

1.7488

1.7503 1.7497 2.710

YAD-32

24465-32 32NBF2462YJ

2.0000

3.8750

1.500

1.229

1.172

3.750 2.562

3/8

0.032 48900

36700

14000

1.9994

1.9987

2.0003 1.9996 3.420

YAD-36

24465-36 36NBF2469YJ

2.2500

4.3125

1.500

1.229

1.172

4.188 2.859

3/8

0.032 55000

41200

15600

2.2494

2.2487

2.2503 2.2496 4.230

YAD-40

24465-40 40NBF2476YJ

2.5000

4.7500

1.500

1.229

1.172

4.625 3.109

3/8

0.032 59900

44900

17200

2.4994

2.4987

2.5003 2.4996 5.140

YAD-44

24465-44 44NBF2480YJ

2.7500

5.0000

1.500

1.229

1.172

4.875 3.344

3/8

0.032 64800

48600

18100

2.7494

2.7487

2.7503 2.7496 5.490

YAS-06

24466-6

6NBL1618YJ

0.3750

1.1250

1.000

0.875

0.750

1.000 0.672

3/16

0.032

7130

5370

2600

0.3744

0.3739

0.3752 0.3747 0.228

YAS-08

24466-8

8NBL2022YJ

0.5000

1.3750

1.250

1.125

1.000

1.250 0.891

1/4

0.032 12500

9370

4250

0.4994

0.4989

0.5002 0.4997 0.416

YAS-10

24466-10 10NBL2426YJ

0.6250

1.6250

1.500

1.375

1.125

1.500 1.109

3/8

0.032 19900

15000

5650

0.6244

0.6239

0.6252 0.6247 0.693

YAS-12

24466-12 12NBL2830YJ

0.7500

1.8750

1.750

1.625

1.375

1.750 1.281

3/8

0.032 28500

21400

7950

0.7494

0.7489

0.7502 0.7497 1.180

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

69

A E R O S P A C E

B E A R I N G S
W
C
H

MS24461 (YAG SERIES)

Single Row

A E

General Information
The YAG Series Airframe Bearings are manufactured in accordance with MS24461 standards. The
O.D. of these bearings are cadmium plated and designed to be mounted inside a housing. Each
bearing consists of an inner race, outer race, needle rollers & end washers. Relubrication holes and
grooves are provided. For corrosion protection all external surfaces except the bore are cadmium
plated. Inner race grooves are omitted from the -3, -4, and -5 sizes due to bolt strength limitations.
Consult our Engineering department for further specific requirements and special designs.
Dimensional Data (inches)

70

+.0000
-.0007

B
Roller
O.D.
+.0000
-.0010

W
C
D
Overall Outer Race Radius
Width
Width
or
+.000
+.000
45
-.005
-.005 Chamfer

E
End
Ring
Dia.

H
Outer
Race
Groove
Width

P
Inner
Ring
Lube
Width

d
Min
Clamp
Dia.

Limit
Load
Rating
(lbf)

Aircraft
Static
Capacity
(lbf)

Weight
Approx
(lbs)

3NBC511ZP

0.1900

0.6875

0.312

0.218

0.022

0.625

1/16

0.438

1800

2700

0.028

24461-4

4NBC612ZP

0.2500

0.7500

0.375

0.281

0.022

0.688

11/16

0.516

2870

4300

0.040

YAG-05-C

24461-5

5NBC713ZP

0.3125

0.8125

0.437

0.344

0.022

0.750

3/32

0.516

4070

6100

0.057

YAG-06

24461-6

6NBC914YZP

0.3750

0.8750

0.562

0.469

0.022

0.812

1/8

3/16

0.641

6330

9500

0.075

YAG-07

24461-7

7NBC1015YZP

0.4375

0.9375

0.625

0.531

0.032

0.875

1/8

3/16

0.703

8000

12000

0.097

YAG-08

24461-8

8NBC1012YZP

0.5000

1.1250

0.750

0.656

0.032

1.031

1/8

3/16

0.844

11600

17400

0.165

YAG-09

24461-9

9NBC1419YZP

0.5625

1.1875

0.875

0.781

0.032

1.094

5/32

3/16

0.891

15000

22500

0.207

YAG-10

24461-10

10NBC1620YZP

0.6250

1.2500

1.000

0.906

0.032

1.156

5/32

1/4

0.953

18900

28300

0.252

YAG-12

24461-12

12NBC1822YZP

0.7500

1.3750

1.125

1.000

0.032

1.281

5/32

1/4

1.078

23900

35800

0.336

YAG-14

24461-14

14NBC2026YZP

0.8750

1.6250

1.250

1.125

0.032

1.500

5/32

3/8

1.250

30500

45800

0.423

YAG-16

24461-16

16NBC2028YZP

1.0000

1.7500

1.250

1.125

0.032

1.625

5/32

3/8

1.375

33900

50900

0.510

YAG-20

24461-20

20NBC2032YZP

1.2500

2.0000

1.250

1.049

0.032

1.906

5/32

3/8

1.625

37900

56800

0.600

YAG-24

24461-24

24NBC2036YZP

1.5000

2.2500

1.250

1.049

0.032

2.156

5/32

3/8

1.875

44200

66300

0.710

YAG-28

24461-28

28NBC2040YZP

1.7500

2.5000

1.250

1.049

0.032

2.406

5/32

3/8

2.125

50500

75700

0.780

YAG-32

24461-32

32NBC2044YZP

2.0000

2.7500

1.250

1.049

0.032

2.656

5/32

3/8

2.375

56800

85200

0.880

YAG-36

24461-36

36NBC2048YZP

2.2500

3.0000

1.250

1.049

0.032

2.906

5/32

3/8

2.625

63100

94600

0.980

YAG-40

24461-40

40NBC2052YZP

2.5000

3.2500

1.250

1.049

0.032

3.156

5/32

3/8

2.875

69400

104100

1.060

YAG-44

24461-44

44NBC2056YZP

2.7500

3.5000

1.250

1.049

0.032

3.406

5/32

3/8

3.125

75700

113500

1.150

YAG-48

24461-48

44NBC2060YZP

3.0000

3.7500

1.250

1.049

0.032

3.656

5/32

3/8

3.375

82000

123000

1.240

YAG-52

24461-52

52NBC2064YZP

3.2500

4.0000

1.250

1.049

0.032

3.906

5/32

3/8

3.641

88300

132500

1.340

YAG-56

24461-56

56NBC2070YZP

3.5000

4.3750

1.250

1.049

0.044

4.219

5/32

3/8

3.969

96700

145100

1.730

YAG-60

24461-60

60NBC2074YZP

3.7500

4.6250

1.250

1.049

0.044

4.469

5/32

3/8

4.219

103000

154500

1.840

YAG-64

24461-64

64NBC2078YZP

4.0000

4.8750

1.250

1.049

0.044

4.719

5/32

3/8

4.469

109000

164000

1.990

SMITH
Bearing
Number

Military
Number
MS

ABMA
Number

YAG-03-C

24461-3

YAG-04-C

A
Bore

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

B E A R I N G S

MS24461 (YAG SERIES)

Single Row
(continued)

D Outer Diameter Tolerance

A Bore Tolerance
YAG-3 to YAG 52
YAG-56 to YAG 64

+0.0000 / -0.0007
+0.0000 / -0.0008

YAG-3 to YAG 16
YAG-23 to YAG 36
YAG-40 to YAG 60
YAG 64

+0.0000
+0.0000
+0.0000
+0.0000

/
/
/
/

-0.0005
-0.0006
-0.0008
-0.0010

Chart continued from previous page

Recommended Housing Bore Diameter

Recommended Shaft Diameter

Slip Fit

Slip Fit

Press Fit

Press Fit

Max

Min

Max

Min

Max

Min

Max

0.1894

0.1889

0.1902

0.1897

0.6867

0.6872

0.6874

0.6879

0.2494

0.2489

0.2502

0.2497

0.7492

0.7497

0.7499

0.7504

0.3119

0.3114

0.3127

0.3122

0.8117

0.8122

0.8124

0.8129

0.3744

0.3739

0.3752

0.3747

0.8742

0.8747

0.8749

0.8754

0.4369

0.4364

0.4377

0.4372

0.9367

0.9372

0.9374

0.9379

0.4994

0.4989

0.5002

0.4997

1.1242

1.1247

1.1249

1.1254

0.5619

0.5614

0.5627

0.5622

1.1867

1.1872

1.1874

1.1879

0.6244

0.6239

0.6252

0.6247

1.2492

1.2497

1.2499

1.2504

0.7494

0.7489

0.7502

0.7497

1.3741

1.3747

1.3749

1.3755

0.8744

0.8739

0.8752

0.8747

1.6241

1.6247

1.6249

1.6255

0.9994

0.9989

1.0002

0.9997

1.7491

1.7497

1.7499

1.7505

1.2494

1.2488

1.2503

1.2497

1.9991

1.9997

1.9999

2.0005

1.4994

1.4988

1.5003

1.4997

2.2488

2.2496

2.2499

2.2507

1.7494

1.7488

1.7503

1.7497

2.4988

2.4996

2.4999

2.5007

1.9994

1.9987

2.0003

1.9996

2.7488

2.7496

2.7499

2.7507

2.2494

2.2487

2.2503

2.2496

2.9988

2.9996

2.9999

3.0007

2.4994

2.4987

2.5003

2.4996

3.2485

3.2495

3.2498

3.2508

2.7494

2.7487

2.7503

2.7496

3.4985

3.4995

3.4998

3.5008

2.9994

2.9987

3.0003

2.9996

3.7485

3.7495

3.7498

3.7508

3.2494

3.2486

3.2504

3.2496

3.9985

3.9995

3.9998

4.0008

3.4994

3.4986

3.5004

3.4996

4.3735

4.3745

4.3748

4.3758

3.7494

3.7486

3.7504

3.7496

4.6235

4.6245

4.6248

4.6258

3.9994

3.9986

4.0004

3.9996

4.8735

4.8745

4.8748

4.8758

www.smithbearing.com

Min

tel. 800.932.0076 fax. 908.789.9429

71

A E R O S P A C E

B E A R I N G S

MS21432 (HRS SERIES)

NAS 562
Integral Stud Type

+0.031
Stud Length -0.016
.005
Min.

C
Screwdriver
Slot

T
S

Grip Length
+ .016
(see code)
NAS516-1A
Fitting

2 Incomplete
Threads Max.

General Information
The HRS Series Integral Stud Type airframe bearings are manufactured in accordance with
MS21432 standards. The bearings consist of an inner stud, outer race, needle rollers, end washer
and if required, seals. Relubrication holes and fittings are optional as shown below. For corrosion
protection the outer race is hard-chrome plated while all other exposed surfaces are cadmium or
zinc-nickel plated. Consult our Engineering Department for special variations.

Coding Example:
NAS562-8FEE20 AG = Cam Follower needle bearing 1.125" roller, 0.500" stud, sealed bearing,
lubricator in flanged end of stud, 1.2500 grip length
(MS21432)
1.672 stud length without cotter pin hole, with Mil-G-23827 grease.
G = Mil-G-81322 grease; no code = Mil-G-23827 grease.
A = No cotter pin hole (Not required for types T or TEE) Omit for cotter pin hole.
Grip length in .0625 inch increments.
F
= unsealed with lubricator in flanged end of stud.
T
= unsealed with lubricator in threaded end of stud, no cotter pin hole.
"-" = unsealed without lubricator.
Bearing FEE = sealed with lubricator in flanged end of stud.
TEE = sealed with lubricator in threaded end of stud, no cotter pin hole.
R = sealed bearing without lubrication.
Stud diameter in 0.0625" increments.
Document number.

Dimensional Data (inches)

SMITH
Bearing
Number

72

MS
Bearing
Number

NAS562
Number

A
Stud
Dia.
+.0000
-.0015

B
Roller
O.D.
+.0010
-.0005

C
Roller
Width
+.000
-.005

D
Min

S
Thread
Length

Thread
Size

P
Cotter
Pin
Hole
Dia.

T
Track
Contact
Length
(Min)

J
Dia.
(Ref)

Track
Limit
Capacity Load
40HRC Rating
(lbf)
(lbf)

Load
Rating
As A
Track
Roller
(lbf)

Housing Bore
Diameter
For Stud
Max

Min

HRS1

MS21432-3

NAS562-3

0.1900

0.5000

0.281

0.211

0.344

10-32

0.070

0.230

N/A

385

790

395

0.1905

0.1900

HRS2

MS21432-4

NAS562-4

0.2500

0.6875

0.281

0.224

0.344

1/4-28

0.076

0.232

0.076

525

940

470

0.2505

0.2500

HRS3

MS21432-5

NAS562-5

0.3125

0.7500

0.344

0.234

0.359

5/16-24

0.076

0.290

0.076

725

1,660

830

0.3125

0.3120

HRS4

MS21432-6

NAS562-6

0.3750

0.8750

0.469

0.265

0.359

3/8-24

0.106

0.380

0.106 1,100

2,720

1,360

0.3755

0.3750

HRS5

MS21432-7

NAS562-7

0.4375

1.0000

0.531

0.283

0.422

7/16-20

0.106

0.430

0.106 1,425

3,860

1,930

0.4375

0.4370

HRS6

MS21432-8

NAS562-8

0.5000

1.1250

0.656

0.314

0.422

1/2-20

0.106

0.530

0.106 1,975

6,080

3,040

0.5005

0.5000

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

Stud Length +0.031

-0.016
.005
Min.

C
Screwdriver
Slot

B E A R I N G S

MS21447 (CHRS SERIES)

Integral Stud Type
Crowned

Grip Length
+ .016
(see code)

S
NAS516-1A
Fitting
B

2 Incomplete
Threads Max.

CROWN

General Information
The CHRS Series Integral Stud Type airframe bearings are manufactured in accordance with
MS21447 standards. The outer races on the CHRS Series are Crowned. The bearings consist of an
inner stud, outer race, needle rollers, end washer, and if required seals. Relubrication holes and
fittings are optional as shown below. For corrosion protection the outer race is hard-chrome plated
while all other exposed surfaces are cadmium or zinc-nickel plated. Consult our Engineering
Department for special variations.

Coding Example:
MS21447-8F20 AG = Cam Follower needle bearing 1.1250" roller, stud, sealed with crown
radius on the O.D. Lubrication in flanged end of stud. 1.250 grip length
1.672 stud length without cotter pin hole, with Mil-G-23827 grease.
G = Mil-G-81322 grease; no designator = Mil-G-23827 grease.
A = No cotter pin hole (Not required for type T) Omit for cotter pin hole.
Grip length in .0625 inch increments.
F = Lubrication in flanged end of stud.
Bearing T = Lubrication in threaded end of stud. No cotter pin hole.
R = Bearing without lubrication.
Stud diameter in 0.0625" increments.
Document number.

Dimensional Data (inches)

SMITH
Bearing
Number

MS
Bearing
Number

A
Stud
Dia.
+.0000
-.0015

B
Roller
O.D.
+.0010
-.0005

C
Roller
Width
+.000
-.005

D
(Min)

S
Thread
Length

Thread
Size

P
Cotter
Pin
Hole
Dia.

T
Track
Contact
Length
(Min)

J
Dia.
(Ref)

Track
Capacity
40HRC
(lbf)

Limit
Load
Rating
(lbf)

Load
Rating
As A
Track
Roller
(lbf)

Housing Bore
Diameter
For Stud
Max

Min

CHRS1

MS21447-3

0.1900

0.5000

0.281

0.211

0.344

10-32

0.070

0.230

None

385

790

395

0.1905

0.1900

CHRS2

MS21447-4

0.2500

0.6875

0.281

0.224

0.344

1/4-28

0.076

0.230

0.076

525

940

470

0.2505

0.2500

CHRS3

MS21447-5

0.3125

0.7500

0.344

0.234

0.359

5/16-24

0.076

0.290

0.076

725

1,660

830

0.3125

0.3120

CHRS4

MS21447-6

0.3750

0.8750

0.469

0.265

0.359

3/8-24

0.106

0.380

0.106

1,100

2,720 1,360

0.3755

0.3750

CHRS5

MS21447-7

0.4375

1.0000

0.531

0.283

0.422

7/16-20

0.106

0.430

0.106

1,425

3,860 1,930

0.4375

0.4370

CHRS6

MS21447-8

0.5000

1.1250

0.656

0.314

0.422

1/2-20

0.106

0.530

0.106

1,975

6,080 3,040

0.5005

0.5000

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

73

A E R O S P A C E

MILITARY
Standard Number

74

B E A R I N G S

TORRINGTON
Number

McGILL
Number

SMITH
Number

24465-3

3NBF512YJ

3NBF512YJ

YAD-03

24465-4

4NBF614YJ

4NBF614YJ

YAD-04

24465-6

6NBF817YJ

6NBF817YJ

YAD-06

24465-8

8NBF1021YJ

8NBF1021YJ

YAD-08

24465-10

10NBF1224YJ

10NBF1224YJ

YAD-10

24465-12

12NBF1628YJ

12NBF1628YJ

YAD-12

24465-14

14NBF1832YJ

14NBF1832YJ

YAD-14

24465-20

20NBF2040YJ

20NBF2040YJ

YAD-20

24465-24

24NBF2448YJ

24NBF2448YJ

YAD-24

24465-28

28NBF2455YJ

28NBF2455YJ

YAD-28

24465-32

32NBF2462YJ

32NBF2462YJ

YAD-32

24465-36

36NBF2469YJ

36NBF2469YJ

YAD-36

24465-40

40NBF2476YJ

40NBF2476YJ

YAD-40

24465-44

44NBF2480YJ

44NBF2476YJ

YAD-44

24466-6

6NBL1618YJ

6NBL1618YJ

YAS-06

24466-8

8NBL2022YJ

8NBL2022YJ

YAS-08

24466-10

10NBL2426YJ

10NBL2426YJ

YAS-10

24466-12

12NBL2830YJ

12NBL2830YJ

YAS-12

21432-3

HRS-1C

HRS-1C

HRS-1C

21432-4

HRS-2C

HRS-2C

HRS-2C

21432-5

HRS-3C

HRS-3C

HRS-3C

21432-6

HRS-4C

HRS-4C

HRS-4C

21432-7

HRS-5C

HRS-5C

HRS-5C

21432-8

HRS-6C

HRS-6C

HRS-6C

21447-3

CHRS-1C

CHRS-1C

CHRS-1C

21447-4

CHRS-2C

CHRS-2C

CHRS-2C

21447-5

CHRS-3C

CHRS-3C

CHRS-3C

21447-6

CHRS-4C

CHRS-4C

CHRS-4C

21447-7

CHRS-5C

CHRS-5C

CHRS-5C

21447-8

CHRS-6C

CHRS-6C

CHRS-6C

21438-103

ATF-3

3 AFC 512

YAF-03

21438-104

ATF-4

4 AFC 614

YAF-04

21438-106

ATF-6

6 AFC 817

YAF-06

21438-108

AT

8 AFC 1021

YAF-08

21438-110

ATF-10

10 AFC 1224

YAF-10

21438-112

ATF-12

12 AFC 1628

YAF-12

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

MILITARY
Standard Number

TORRINGTON
Number

B E A R I N G S

McGILL
Number

SMITH
Number

21438-114

ATF-14

14 AFC 1832

YAF-14

21438-120

ATF-20

20 AFC 2040

YAF-20

21438-124

ATF-24

24 AFC 2448

YAF-24

21438-128

ATF-28

28 AFC 2455

YAF-28

21438-132

ATF-32

32 AFC 2462

YAF-32

21438-136

ATF-36

36 AFC 2469

YAF-36

21438-140

ATF-40

40 AFC 2476

YAF-40

21438-144

ATF-44

44 AFC 2480

YAF-44

21439-106

ATL-6

6 AL 1618

YAT-06

21439-108

ATL-8

8 AL 2022

YAT-08

21439-110

ATL-10

10 AL 2426

YAT-10

21439-112

ATL-12

12 AL 2830

YAT-12

24461-3

3NBC511ZP

3NBC511ZP

YAG-03-C

24461-4

4NBC612ZP

4NBC612ZP

YAG-04-C

24461-5

5NBC713ZP

5NBC713ZP

YAG-05-C

24461-6

6NBC914YZP

6NBC914YZP

YAG-06

24461-7

7NBC1015YZP

7NBC1015YZP

YAG-07

24461-8

8NBC1218YZP

8NBC1218YZP

YAG-08

24461-9

9NBC1419YZP

9NBC1419YZP

YAG-09

24461-10

10NBC1620YZP

10NBC1620YZP

YAG-10

24461-12

12NBC1822YZP

12NBC1822YZP

YAG-12

24461-14

14NBC2026YZP

14NBC2026YZP

YAG-14

24461-16

16NBC2028YZP

16NBC2028YZP

YAG-16

24461-20

20NBC2032YZP

20NBC2032YZP

YAG-20

24461-24

24NBC2036YZP

24NBC2036YZP

YAG-24

24461-28

28NBC2040YZP

28NBC2040YZP

YAG-28

24461-32

32NBC2044YZP

32NBC2044YZP

YAG-32

24461-36

36NBC2048YZP

36NBC2048YZP

YAG-36

24461-40

40NBC2052YZP

40NBC2052YZP

YAG-40

24461-44

44NBC2056YZP

44NBC2056YZP

YAG-44

24461-48

48NBC2060YZP

48NBC2060YZP

YAG-48

24461-52

52NBC2064YZP

52NBC2064YZP

YAG-52

24461-56

56NBC2070YZP

56NBC2070YZP

YAG-56

24461-60

60NBC2074YZP

60NBC2074YZP

YAG-60

24461-64

64NBC2078YZP

64NBC2078YZP

YAG-64

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

75

A E R O S P A C E

B E A R I N G S

SEB
Slotted Entry Bearings
Pre-Swaged, Narrow, Annular

W
p

45

General Information
The SMITH SEB Slotted Entry Bearings feature a two-piece design which include an inner ball
with a spherical race to accommodate misalignment. The outer ring housing has a slotted entry
window to allow for fast and easy insertion and removal of the inner ball. Depending on your
requirements, the SMITH SEB Slotted Entry Bearings can be produced using a wide range of
materials. Slotted Entry Bearings are used in various Aerospace applications such as: slats, flap-tracks,
landing gear, doors, etc.. Contact our Engineering Department for special design to meet your needs.

SMITH Bearing
Number

76

Bore
Diameter
+.0000
-.0005

Outside
Diameter
+.0000
-.0005

Flanged
Diameter
+.002
-.002

Ball
Width
+.000
-.002

Race
Width
+.000
-.002

Ball
Flat
Diameter

Misalignment
Angle

Ball
O.D..
(Ref)

Radial
Static
Limit
Load
(lbs)

Weight
Approx.
(lbs)

SEB-4

.2500

.6562

.676

.343

.250

.364

12

.5000

4,880

.02

SEB-5

.3125

.7500

.770

.375

.281

.437

11

.5625

5,309

.03

SEB-6

.3750

.8125

.852

.406

.213

.486

10

.6250

6,435

.04

SEB-7

.4375

.9062

.946

.437

.343

.572

.7180

8,069

.06

SEB-8

.5000

1.0000

1.080

.500

.390

.562

.8125

11,180

.07

SEB-9

.5625

1.0937

1.174

.562

.437

.624

.8750

13,455

.09

SEB-10

.6250

1.1875

1.267

.625

.500

.687

.9680

17,166

.11

SEB-12

.7500

1.4375

1.517

.750

.593

.812

1.1870

25,680

.17

SEB-14

.8750

1.5625

1.642

.875

.703

.937

1.3120

39,610

.22

SEB-16

1.0000

1.7500

1.830

1.000

.797

1.062

1.5000

56,290

.28

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

SEBF
Slotted Entry Bearings
Flanged

Detail A

B E A R I N G S

Rad. 0.010
0.007

60
k

B S

Detail B

90
45
.012
.008

General Information
The SMITH SEBF Slotted Entry Bearings feature a two-piece design which include an inner ball
with a spherical race to accommodate misalignment. The outer ring housing has a slotted entry
window to allow for fast and easy insertion and removal of the inner ball. Depending on your
requirements, the SMITH SEBF Slotted Entry Bearings can be produced using a wide range of
materials. Slotted Entry Bearings are used in various Aerospace applications such as: slats, flap-tracks,
landing gear, doors, etc.. Contact our Engineering Department for special design to meet your needs.

Bore
Diameter
+.0000
-.0005

Outside
Diameter
+.0000
-.0005

Flanged
Diameter
+.002
-.002

Ball
Width
+.000
-.002

Race
Width
+.000
-.002

Ball
Flat
Diameter

SEBF-4

.2500

.6562

.676

.343

.250

.364

12

.588

SEBF-5

.3125

.7500

.770

.375

.281

.437

11

SEBF-6

.3750

.8125

.852

.406

.213

.486

SEBF-7

.4375

.9062

.946

.437

.343

SEBF-8

.5000

1.0000

1.080

.500

SEBF-9

.5625

1.0937

1.174

SEBF-10

.6250

1.1875

SEBF-12

.7500

SEBF-14
SEBF-16

Bearing

SMITH
Number

S
Ball
O.D..
(Ref)

Radial
Static
Limit
Load
(lbs)

Weight
Approx.

.022

.5000

4,880

.02

.682

.022

.5625

5,309

.03

10

.714

.032

.6250

6,435

.04

.572

.808

.032

.7180

8,069

.06

.390

.562

.877

.052

.8125

11,180

.07

.562

.437

.624

.970

.052

.8750

13,455

.09

1.267

.625

.500

.687

1.064

.052

.9680

17,166

.11

1.4375

1.517

.750

.593

.812

1.314

.052

1.1870

25,680

.17

.8750

1.5625

1.642

.875

.703

.937

1.439

.052

1.3120

39,610

.22

1.0000

1.7500

1.830

1.000

.797

1.062

1.627

.052

1.5000

56,290

.28

www.smithbearing.com

MisV-groove V-groove
alignment Centerline Depth
Angle
+.002
Size
-.002

tel. 800.932.0076 fax. 908.789.9429

(lbs)

77

A E R O S P A C E

B E A R I N G S
W

F
SMITH-ALIGN
Spherical Bearings

H
S

General Information
The F Series Smith-Align Bearings are manufactured for various uses in the Aerospace Industry.
The unique design of this bearing is its two-piece outer ring which is self-retained around the ball.
The two-piece ring is separated by V joints. The extreme precision fit of the ball and ring assures
complete inner ball and outer ring contact. The bearing can be provided using a variety of materials
with either or both components hardened.
The Smith-Align Bearings are manufactured in various other special series. The table indicates
a basic style using SAE 52100 material hardened to RC 58-60. Please consult our Engineering
Department for special design needs.

Dimensional Data (inches)

SMITH
Bearing
Number

78

B
Bore
Diameter
+.0000
-.0005

D
Outer
Diameter
+.0000
-.0005

W
Overall
Ball Width
+.000
-.005

H
Race
Width
+.010
-.000

A
Flat
Diameter
+.010
-.005

S
Ball
Diameter
(Ref)

r
Chamfer
+.015
-.000

E
Max.
Tilt
Angle

Radial
Load
Capacity
(lbs)

F3

.1900

.500

0.359

0.281

0.250

0.437

0.010

18

10700

F3-1

.1900

.625

0.437

0.322

0.301

0.531

0.010

18

16000

F4

.2500

.625

0.437

0.322

0.301

0.531

0.010

18

16000

F5

.3125

.6875

0.437

0.322

0.401

0.593

0.010

18

17500

F6

.3750

.8125

0.500

0.401

0.472

0.687

0.020

18

25700

F7

.4375

.9375

0.562

0.437

0.542

0.781

0.020

18

32100

F8

.5000

1.000

0.625

0.500

0.612

0.875

0.020

18

41200

F10

.5625

1.125

0.687

0.531

0.726

1.000

0.020

18

49500

F11

.6250

1.1875

0.750

0.562

0.753

1.062

0.020

18

53800

F12

.7500

1.375

0.875

0.625

0.892

1.250

0.020

18

74700

F14

.8750

1.625

0.875

0.750

1.062

1.375

0.030

18

97700

F16

1.0000

2.125

1.375

1.000

1.275

1.875

0.030

18

178200

F20

1.2500

2.375

1.500

1.125

1.460

2.093

0.047

18

223500

F22

1.3750

2.5625

1.687

1.218

1.535

2.261

0.047

18

263700

F24

1.5000

2.6875

1.687

1.218

1.693

2.390

0.047

18

277800

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

D R I L L

J I G

Drill Jig Bushings

ABC ACCURATE BUSHING COMPANY

B U S H I N G S

Type P
Headless
Press Fit Style

Type H
with Head
Press Fit Style

Type F
Fixed
Renewable

Type F
Slip-Fixed
Renewable

Type L
Headless
Liner

Type HL
with Head
Liner

Type LS
Lockscrew for
Standard
Renewable Bushings

Type TW
Lockscrew for
Thinwall
Renewable Bushings

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

79

Fractional, Letter & Number Drill Sizes

Size
#80
#79
1/64
#78
#77
#76
#75
#74
#73
#72
#71
#70
#69
#68
1/32
#67
#66
#65
#64
#63
#62
#61
#60
#59
#58
#57
#56
3/64

#55
#54

#53
1/16
#52
#51
#50
#49
#48
5/64
#47
#46
#45
#44
#43
#42
3/32
#41
#40
#39
#38
#37

80

Decimal
.0135
.0138
.0145
.0156
.0157
.0160
.0177
.0180
.0197
.0200
.0217
.0210
.0236
.0225
.0240
.0250
.0256
.0260
.0276
.0280
.0292
.0295
.0310
.0312
.0315
.0320
.0333
.0335
.0350
.0354
.0360
.0370
.0374
.0380
.0390
.0394
.0400
.0410
.0413
.0420
.0430
.0433
.0453
.0465
.0469
.0472
.0492
.0512
.0520
.0531
.0550
.0551
.0571
.0591
.0595
.0610
.0625
.0629
.0635
.0650
.669
.0670
.0689
.0700
.0709
.0728
.0730
.0748
.0760
.0768
.0781
.0785
.0787
.0807
.0810
.0820
.0827
.0846
.0860
.0866
.0886
.0890
.0905
.0925
.0935
.0937
.0945
.0960
.0965
.0980
.0984
.0995
.1004
.1015
.1024
.1040
.1043

Millimeter
.3429
.3505
.3683
.3962
.3988
.4064
.4496
.4572
.5004
.5080
.5512
.5334
.5994
.5715
.6096
.6350
.6502
.6604
.7010
.7112
.7417
.7493
.7874
.7925
.8001
.8128
.8382
.8509
.8890
.8992
.9296
.9398
.9499
.9652
.9906
1.0076
1.0160
1.0414
1.0490
1.0668
1.0922
1.0998
1.1506
1.1811
1.1913
1.1989
1.2497
1.3005
1.3208
1.3487
1.3970
1.3995
1.4503
1.5011
1.5113
1.5494
1.5875
1.5977
1.6129
1.6510
1.6993
1.7018
1.7501
1.7780
1.8009
1.8481
1.8542
1.8999
1.9304
1.9507
1.9837
1.9939
1.9989
2.0498
2.0574
2.0828
2.1006
2.1488
2.1844
2.1996
2.2504
2.2606
2.2987
2.3495
2.3749
2.3799
2.4003
2.4384
2.4511
2.4892
2.4994
2.5273
2.5502
2.5781
2.6009
2.6416
2.6492

Size
#36
7/64
#35
#34
#33
#32
#31
1/8
#30
#29
#28
9/64
#27
#26
#25
#24
#23
5/32
#22
#21
#20
#19
#18
11/64
#17
#16
#15
#14
#13
13/16
#12
#11
#10
#9
#8
#7
13/64
#6
#5
#4
#3
7/32
#2
#1
A
15/64
B
C
D
1/4
F

Decimal
.1063
.1065
.1083
.1094
.1100
.1102
.1110
.1130
.1142
.1160
.1181
.1200
.1220
.1250
.1260
.1280
.1285
.1299
.1339
.1360
.1378
.1405
.1406
.1417
.1440
.1457
.1470
.1477
.1495
.1496
.1520
.1535
.1540
.1562
.1570
.1575
.1590
.1610
.1614
.1654
.1660
.1674
.1693
.1695
.1719
.1730
.1732
.1770
.1771
.1800
.1811
.1820
.1850
.1870
.1875
.1890
.1910
.1929
.1935
.1960
.1968
.1990
.2008
.2010
.2031
.2040
.2047
.2055
.2067
.2087
.2090
.2126
.2130
.2165
.2187
.2205
.2210
.2244
.2264
.2280
.2283
.2323
.2340
.2344
.2362
.2380
.2401
.2420
.2441
.2460
.2461
.2480
.2500
.2520
.2559
.2570
.2598

Millimeter
2.7000
2.7089
2.7508
2.7788
2.7940
2.7991
2.8194
2.8702
2.9007
2.9464
2.9997
3.0480
3.0988
3.1750
3.2004
3.2512
3.2639
3.2995
3.4011
3.4544
3.5001
3.5687
3.5712
3.5992
3.6576
3.7008
3.7338
3.7516
3.7973
3.7998
3.8608
3.8989
3.9116
3.9675
3.9878
4.0005
4.0386
4.2926
4.0996
4.2012
4.2316
4.2352
4.3002
4.3053
4.3663
4.3942
4.3942
4.4958
4.4983
4.5720
4.5999
4.6228
4.6990
4.7498
4.7625
4.8006
4.8514
4.8997
4.9149
4.9784
4.9987
5.0546
5.1003
4.1054
5.1587
5.1816
5.1994
5.2197
5.2502
5.3009
5.3086
5.4000
5.6210
5.4991
5.5550
5.6007
5.6134
5.6998
5.7567
5.7912
5.7988
5.9004
5.9436
5.9538
5.9999
6.0452
6.0985
6.1468
6.2001
6.2484
6.2509
6.2992
6.3500
6.4008
6.4999
6.5278
6.5989

Millimeter & Decimal Equivalent

Size
G
17/64
H
I
J
K
9/32

L
M
19/64
N

5/16
O
P
21/64
Q
R
11/32
S
T
23/64

U
3/8
V

W
25/64
X
Y
13/32
Z
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8

tel. 800.932.0076 fax. 908.789.9429

Decimal

Millimeter

Size

Decimal

Millimeter

.2610
.2638
.2656
.2658
.2660
.2677
.2716
.2720
.2756
.2770
.2795
.2810
.2812
.2835
.2855
.2874
.2900
.2913
.2950
.2953
.2969
.2992
.3020
.3031
.3051
.3071
.3110
.3125
.3150
.3160
.3189
.3228
.3230
.3248
.3268
.3281
.3307
.3320
.3346
.3386
.3390
.3425
.3437
.3445
.3465
.3480
.3504
.3543
.3580
.3583
.3594
.3622
.3642
.3661
.3680
.3701
.3740
.3750
.3770
.3780
.3819
.3839
.3858
.3860
.3898
.3906
.3937
.3970
.4040
.4062
.4130
.4134
.4219
.4330
.4375
.4528
.4531
.4687
.4724
.4844
.4921
.5000
.5119
.5156
.5312
.5315
.5469
.5512
.5625
.5709
.5781
.5906
.5937
.6094
.6102
.6250
.6299

6.6294
6.7005
6.7462
6.7513
6.7564
6.7796
6.8986
6.9088
7.0002
7.0358
7.0993
7.1374
7.1425
7.2009
7.2517
7.3000
7.3660
7.3990
7.4930
7.5006
7.5413
7.5997
7.6708
7.6987
7.7495
7.8003
7.8994
7.9375
8.0010
8.0264
8.1001
8.1991
8.2042
8.2499
8.3007
8.3337
8.3998
8.4328
8.4988
8.6004
8.6106
8.6995
8.7300
8.7503
8.8011
8.8392
8.9916
8.9992
9.0932
9.1008
9.1288
9.1999
9.3071
9.3119
9.3472
9.4233
9.4996
9.5250
9.5758
9.6012
9.7003
9.7511
9.7993
9.8044
9.9009
9.9212
10.0000
10.0838
10.2616
10.3175
10.4902
10.5004
10.7163
10.9982
11.1125
11.5011
11.5087
11.9050
11.9990
12.3038
12.4993
12.7000
13.0023
13.0962
13.4925
13.5001
13.8913
14.0005
14.2875
14.5009
14.6837
15.0012
15.0800
15.4788
15.8750
15.8750
15.9995

41/64

.6406
.6496
.6562
.6693
.6719
.6875
.6890
.7031
.7087
.7187
.7283
.7344
.7480
.7500
.7656
.7677
.7812
.7874
.7969
.8071
.8125
.8268
.8281
.8437
.8465
.8594
.8661
.8750
.8858
.8906
.9055
.9062
.9219
.9252
.9375
.9449
.9531
.9646
.9687
.9843
.9844
1.0000
1.0156
1.0312
1.0469
1.0625
1.0781
1.0937
1.1094
1.1250
1.1406
1.1562
1.1719
1.1875
1.2031
1.2187
1.2344
1.2500
1.2656
1.2812
1.2969
1.3125
1.3281
1.3437
1.3594
1.3750
1.3906
1.4062
1.4219
1.4375
1.4531
1.4687
1.4844
1.5000
1.5156
1.5312
1.5469
1.5625
1.5781
1.5937
1.6094
1.6250
1.6406
1.6562
1.6719
1.6875
1.7031
1.7187
1.7344
1.7500
1.7656
1.7812

16.2712
16.4998
16.6675
17.0002
17.0663
17.4625
17.5006
17.8587
18.0010
18.2550
18.4988
18.6538
18.9992
19.0500
19.4462
19.4996
19.8425
20.0000
20.2413
20.5003
20.6375
21.0007
21.0337
21.4300
21.5409
21.8288
21.9989
22.2250
22.4993
22.6212
22.8740
23.0175
23.4163
23.5001
23.8125
24.0005
24.2087
24.5008
24.6049
25.0012
25.0038
25.4000
25.7962
26.1925
26.5913
26.9812
27.3837
27.7780
28.1788
28.5750
28.9712
29.3675
29.7663
30.1625
30.5587
30.9550
31.3538
31.7500
32.1462
32.5425
32.9413
33.3375
33.7337
34.1300
34.5288
34.9250
35.3212
35.7175
36.1163
36.5125
36.9087
37.3050
37.7038
38.1000
38.4962
38.8925
39.2913
39.6812
40.0837
40.4800
40.8788
41.2750
41.6712
42.0675
42.4663
42.8625
43.2587
43.6550
44.0538
44.4500
44.8462
45.2425

21/32
43/64
11/16
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
1-1/64
1-1/32
1-3/64
1-1/16
1-5/64
1-3/32
1-7/64
1-1/8
1-9/64
1-5/32
1-11/64
1-3/16
1-13/64
1-7/32
1-15/64
1-1/4
1-17/64
1-9/32
1-19/64
1-5/16
1-21/64
1-11/32
1-23/64
1-3/8
1-25/64
1-13/32
1-27/64
1-7/16
1-29/64
1-15/32
1-31/64
1-1/2
1-33/64
1-17/32
1-35/64
1-9/16
1-37/64
1-19/32
1-39/64
1-5/8
1-41/64
1-21/32
1-43/64
1-11/16
1-45/64
1-23/32
1-47/64
1-3/4
1-49/64
1-25/32

Millimeter sizes are priced as Special

www.smithbearing.com

D R I L L

J I G

B U S H I N G S

General Information

TECHNICAL DATA

Materials
Drill bushings are manufactured from C1144 stress-proof
steel, or other high carbon steels known for their long wear
and stability. Specialty steels are available upon request.

I.D. Tolerances ABC ANSI Standard

Standard Drill SIzes

I.D.

Tolerance

#80 to 1/4
Over 1/4 to 3/4
Over 3/4 to 11/2
Over 11/2

Nominal
Nominal
Nominal
Nominal

+ .0001 to + .0004
+ .0001 to + .0005
+ .0002 to + .0006
+ .0003 to + .0007

Standard Sizes
Standard sizes in a given I.D. range are sizes listed in
the decimal equivalent chart either as a fraction, number
or letter size. Any other decimal millimeter size within a
given range is considered special and will be priced
accordingly.

Hardness
62-64 Rockwell C
Lead
All finish ground press-fit bushings have a concentric
ground lead for exact alignment in press-fit starting.
Countersink
For drill entry end a blended radius.
Counterbore
Certain bushings are relived in the I.D., depending on the
bore-to-length ratio. They can also be supplied without
counterbore. This type of bushing will be priced as a
special. To order with counterbore, add the prefix
letter C to the symbol.

Special Bushings
When a special unlisted hole size is required, or a special
outside diameter or length is required, the bushing
becomes a special and will be priced accordingly.
When the bushing is not standard and has dimensions not
according to the catalog, make sure that the length and
O.D. are specified as well as the I.D. For Head-Type
bushings, specify the head dimensions. Also, where
tolerances are to be different from the catalog tolerances,
be sure to include the tolerances required.

When using drill bushings with special tools, such as

reamers, counterbores, taps, pilots, etc., it would be an
advantage is the exact hole size is specifiedinstead of
the tool size. This is important since the tolerance and the
clearance of these tools vary according to application.
By processing these special from semi-finished blanks,
prompt service is assured at reasonable prices. All
special bushings will be priced from the factory.

Ordering Information
HOW TO ORDER EXAMPLES

Terms

Add Inside Diameter Size to ANSI Symbol

Example:
P105#77
5/32 Nominal O.D.
5/16 Length
with #77 (.0180) Inside Diameter
P1241/16
3/16 Nominal O.D.
1/4 Length
with 1/16 (.0625) Inside Diameter
P105 .0191 5/32 Nominal O.D.
5/16 Length
with .0191 Inside Diameter

Net 30 Days,
F.O.B. Garwood, New Jersey 07027 USA
Pricing - Prices subject to change without notice
For current price information, call or fax our
Sales Department at:

Tel. 908.789.1121
Fax. 908.789.9429
www.accuratebushing.com

Suggestions for Ordering

Complete tolerance and dimensional data on all ANSI
and ABC standard bushings are given in this catalog. See
Fractional Decimal Drill Size Chart on preceding page
for list of standard drill sizes and decimal equivalents. In
specifying a drill size, use the number, letter, fractional or
decimal size. In specifying decimally, indicate the size in
four places;

Return of Bushings
Special bushings are non-returnable. Full credit will be given
for standard bushings if they are returned freight prepaid
to the factory within two weeks after the date of shipment.
For orders exceeding $100 U.S., written authorization must
be obtained from the factory prior to return shipment.

Example: use .1875, not .187. We would consider .187 as

.1870, which would be special.
www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

81

D R I L L

J I G

B U S H I N G S

C
A
Dia.

Headless Press-Fit
Type P

Finish Ground & Unground O.D.

Inside Diameter
Range
Size

Finish
Ground
Size

Length
Inches
(C)

ANSI
Symbol

.171
.169

1/4
5/16
3/8
*1/2

P-10-4
P-10-5
P-10-6
P-10-8

203
209
211
214

.171
.169

1/4
5/16
3/8
1/2
*3/4

P-10-4
P-10-5
P-10-6
P-10-8
P-10-12

190
193
195
199
209

.171
.169

1/4
5/16
3/8
1/2
*3/4

P-10-4
P-10-5
P-10-6
P-10-8
P-10-12

166
170
173
174
182

.206
.203

1/4
5/16
3/8
1/2
*5/8
*3/4

P-12-4
P-12-5
P-12-6
P-12-8
P-12-10
P-12-12

166
170
173
174
179
182

.206
.203

1/4
5/16
3/8
1/2
5/8
*3/4

P-12-4
P-12-5
P-12-6
P-12-8
P-12-10
P-12-12

119
125
127
130
132
135

.2046 13
.219
/64 .216
.2043

1/4
5/16
3/8
*1/2

P-13-4
P-13-5
P-13-6
P-13-8

203
209
211
214

.2046 13
.219
/64 .216
.2043

1/4
5/16
3/8
*1/2
*3/4

P-13-4
P-13-5
P-13-6
P-13-8
P-13-12

190
193
195
199
209

.2046 13
.219
/64 .216
.2043

1/4
5/16
3/8
1/2
*3/4
*1

P-13-4
P-13-5
P-13-6
P-13-8
P-13-12
P-13-16

166
170
173
174
182
195

1/4
5/16
3/8
1/2
*3/4
*1
*13/8

P-13-4
P-13-5
P-13-6
P-13-8
P-13-12
P-13-16
P-13-22

119
125
128
130
135
140
171

(A)
#80 #70

(.0135 .0280)

#69 3/64

(.0292 .0469)

#55 1/16

(.0520 .0625)

#55 1/16

#52 #39

#80 #70

(.0135 .0280)

#69 3/64

(.0292 .0469)

#55 1/16

(.0520 .0625)

#52 #39

(.0635 .0995)

Unground
Size
(B)

.1578 5
/32
.1575

.1578 5
/32
.1575

.1578 5
/32
.1575

.1891 3
/

(.0520 .0625) .1888

(.0635 .0995)

Inside Diameter

Outside Diameter

16

.1891 3
/16
.1888

.2046 13
.219
/64 .216
.2043

Price
Code

Range
Size

Outside Diameter
Finish
Ground
Size

Length
Inches
(C)

ANSI
Symbol

Price
Code

1/4
5/16
3/8
1/2
5/8
*3/4
*1
*13/8
*11/2
*13/4

P-16-4
P-16-5
P-16-6
P-16-8
P-16-10
P-16-12
P-16-16
P-16-22
P-16-24
P-16-28

115
118
122
125
128
131
136
169
174
179

.327
.322

1/4
5/16
3/8
1/2
5/8
3/4
*1
*13/8
*11/2
*13/4

P-20-4
P-20-5
P-20-6
P-20-8
P-20-10
P-20-12
P-20-16
P-20-22
P-20-24
P-20-28

110
112
113
114
115
117
119
140
150
159

.390
.385

1/4
5/16
3/8
1/2
5/8
3/4
*1

P-24-4
P-24-5
P-24-6
P-24-8
P-24-10
P-24-12
P-24-16

105
106
109
110
112
113
118

.4078 13
.421
/32 .416
.4075

1/4
5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4

P-26-4
P-26-5
P-26-6
P-26-8
P-26-12
P-26-16
P-26-22
P-26-24
P-26-28

105
106
109
110
113
118
125
131
136

1/4
5/16
3/8
1/2
5/8
3/4
*1

P-28-4
P-28-5
P-28-6
P-28-8
P-28-10
P-28-12
P-28-16

105
106
109
110
112
113
118

1/4
5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4
*21/8

P-32-4
P-32-5
P-32-6
P-32-8
P-32-12
P-32-16
P-32-22
P-32-24
P-32-28
P-32-34

105
106
109
110
113
118
125
131
136
193

(A)

#40 9/64

(.0980 .1406)

1/ #10
8

(.1250 .1935)

#10 #1

(.1935 .2280)

.2516
.2513

Unground
Size
(B)

1/
4

.3141 5
/16
.3138

.3766
.3763

3/
8

.265
.260

Includes 1/4

3/ F
16

(.1875 .2570)
Includes .2510

AL

(.2340 .2900)

.4392 7
/16
.4389

.421
.416

Includes .2510

3/ O
16

(.1875 .3160)

.5017
.5014

1/
2

.520
.515

Includes 3/8

All bushings are finished ground unless the letter U appears with the
bushings type or the ANSI symbol.
* Counterbored, leaving correct drill bearing and chip clearance.
Metric sizes are available.

82

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

D R I L L

J I G

B U S H I N G S

Headless Press-Fit
Type P
Finish Ground & Unground O.D.
Chart continued from previous page

Inside Diameter
Range
Size

Finish
Ground
Size

(A)

M 11/32

(.2950 .3437)

5/ 7/
16
16

(.3125 .4375)

.5642 9
/16
.5639
1/4

.6267
.6264

Length
Inches
(C)

ANSI
Symbol

Price
Code

.582
.577

1/4
5/16
3/8
1/2
5/8
3/4
1

P-36-4
P-36-5
P-36-6
P-36-8
P-36-10
P-36-12
P-36-16

110
105
107
107
109
110
112

.645
.640

1/4
5/16
3/8
1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8

P-40-4
P-40-5
P-40-6
P-40-8
P-40-10
P-40-12
P-40-16
P-40-20
P-40-22
P-40-24
P-40-28
P-40-30

110
105
107
107
109
110
112
124
124
126
131
141

1/4
5/16
3/8
1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8
21/2

P-48-4
P-12-5
P-12-6
P-12-8
P-12-10
P-13-12
P-13-16
P-13-20
P-13-22
P-13-24
P-13-28
P-13-34
P-13-40

112
106
110
110
112
112
114
125
125
128
132
142
193

.895
.890

5/16
3/8
1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8
21/2

P-56-5
P-56-6
P-56-8
P-56-10
P-56-12
P-56-16
P-56-20
P-56-22
P-56-24
P-56-28
P-56-34
P-56-40

119
121
115
117
117
119
124
124
128
133
141
151

1.020
1.015

1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8
21/2
3

P-64-8
P-64-10
P-64-12
P-64-16
P-64-20
P-64-22
P-64-24
P-64-28
P-64-34
P-64-40
P-64-48

117
117
117
120
124
124
130
135
141
151
199

Unground
Size
(B)

5/
8

Includes 1/2

5/ 17/
16
32

(.3125 .5312)

.7518
.7515

3/
4

.770
.765

Includes 5/8

1/ 21/
2
32

(.5000 .6562)

.8768
.8765

7/
8

Includes 3/4

1/ 49/
2
64

(.5000 .7656)

Inside Diameter

Outside Diameter

1.0018
1.0015

Range
Size

Outside Diameter
Finish
Ground
Size

(A)

www.smithbearing.com

Length
Inches
(C)

ANSI
Symbol

Price
Code

1/2
5/8
3/4
1
11/2
11/2
13/4

P-72-8
P-72-10
P-72-12
P-72-16
P-72-20
P-72-24
P-72-28

140
136
131
140
148
152
159

5/8
3/4
1
13/8
11/2
13/4
2

P-80-10
P-80-12
P-80-16
P-80-20
P-80-24
P-80-28
P-80-32

136
131
140
148
152
159
171

1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
2
21/8
21/2
3

P-88-8
P-88-10
P-88-12
P-88-16
P-88-20
P-88-22
P-88-24
P-88-28
P-88-32
P-88-34
P-88-40
P-88-48

141
138
131
141
149
149
153
161
173
174
185
222

3/4
1
11/4
11/2
13/4
2
21/4

P-96-12
P-96-16
P-96-20
P-96-24
P-96-28
P-98-32
P-98-36

156
149
156
163
166
182
188

1.770
1.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

P-112-12
P-112-16
P-112-22
P-112-24
P-112-28
P-112-34
P-112-40
P-112-48

156
149
156
163
166
182
193
240

2.270
2.265

1
13/8
11/2
13/4
21/8
21/2
3

P-144-16
P-144-22
P-144-24
P-144-28
P-144-34
P-144-40
P-144-48

167
178
183
187
204
216
253

Unground
Size
(B)

49/ 27/
64
32

1.1270 1
1 /8 1.145
1.140
(.7656 .8437) 1.1267

55/ 15/
64
16

(.8594 .9375)

1.2520
1.2517

11/4

5/ 11/
8
32

1.3772 3
1 /8
(.6250 1.0312) 1.3768

1.270
1.265

1.395
1.390

11/64 11/8

1.5022 1
1 /2 1.520
1.515
(1.0156 1.1250) 1.5018

1 125/64

1.7523 3
1 /4
(1.0000 1.3906) 1.7519

13/8 149/64

2.2525 1
2 /4
(1.3750 1.7656) 2.2521

All bushings are finished ground unless the letter U appears with the
bushings type or the ANSI symbol.
* Counterbore, leaving correct drill bearing and chip clearance.
Metric sizes are available.

tel. 800.932.0076 fax. 908.789.9429

83

D R I L L

J I G

B U S H I N G S

Head Press-Fit

Type H

Finish Ground & Unground O.D.

A Dia.

Inside Diameter
Range
Size

Finish
Ground
Size

Length
Inches
(C)

ANSI
Symbol

1/4
5/16
*3/8
*1/2

H-10-4
H-10-5
H-10-6
H-10-8

209
211
215
217

1/4
5/16
*3/8
*1/2
*3/4

H-10-4
H-10-5
H-10-6
H-10-8
H-10-12

193
195
199
202
214

.171
.169

1/4
5/16
3/8
*1/2
*3/4

H-10-4
H-10-5
H-10-6
H-10-8
H-10-12

171
173
174
175
186

.2046 13
.219
/64 .216
.2043

1/4
5/16
*3/8
*1/2

H-13-4
H-13-5
H-13-6
H-13-8

209
211
215
217

.2046 13
.219
/64 .216
.2043

1/4
5/16
*3/8
*1/2
*3/4

H-13-4
H-13-5
H-13-6
H-13-8
H-13-12

193
195
199
202
214

.2046 13
.219
/64 .216
.2043

1/4
5/16
3/8
*1/2
*3/4
*1

H-13-4
H-13-5
H-13-6
H-13-8
H-13-12
H-13-16

171
173
174
175
186
200

1/4
5/16
3/8
*1/2
*3/4
*1

H-13-4
H-13-5
H-13-6
H-13-8
H-13-12
H-13-16

132
133
136
138
147
165

1/4
5/16
3/8
*1/2
*5/8
*3/4
*1
*13/8
*11/2

H-16-4
H-16-5
H-16-6
H-16-8
H-16-10
H-16-12
H-16-16
H-16-22
H-16-24

125
128
131
132
138
145
163
199
208

1/4
5/16
3/8
1/2
5/8
3/4
*1
*13/8
*11/2

H-20-4
H-20-5
H-20-6
H-20-8
H-20-10
H-20-12
H-20-16
H-20-22
H-20-24

115
118
121
122
123
124
133
170
183

(A)
#80 #70

(.0135 .0280)

#69 3/64

(.0292 .0469)

#55 1/16

(.0520 .0625)

#80 #70

(.0135 .0280)

#69 3/64

(.0292 .0469)

#55 1/16

(.0520 .0625)

#52 #39

(.0635 .0995)

#40 9/64

(.0980 .1406)

1/8 #10

(.1250 .1935)

84

Inside Diameter

Outside Diameter
Unground
Size
(B)

.1578 5
/32
.1575

.1578 5
/32
.1575

.1578 5
/32
.1575

.171
.169

.171
.169

.2046 13
.219
/64 .216
.2043

.2516
.2513

1/
4

.3141 5
/16
.3138

.265
.260

.327
.322

Price
Code

Range
Size

Outside Diameter
Finish
Ground
Size

Length
Inches
(C)

ANSI
Symbol

Price
Code

.390
.385

1/4
5/16
3/8
1/2
5/8
3/4
*1

H-24-4
H-24-5
H-24-6
H-24-8
H-24-10
H-24-12
H-24-16

113
115
117
118
120
121
130

.4078 13
.421
/32 .416
.4075

1/4
5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4

H-26-4
H-26-5
H-26-6
H-26-8
H-26-12
H-26-16
H-26-22
H-26-24
H-26-28

113
114
117
118
121
130
136
143
150

.453
.448

1/4
5/16
3/8
1/2
5/8
3/4
*1

H-28-4
H-28-5
H-28-6
H-28-8
H-28-10
H-28-12
H-28-16

113
115
117
118
120
121
130

.520
.515

1/4
5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4

H-32-4
H-32-5
H-32-6
H-32-8
H-32-12
H-32-16
H-32-22
H-32-24
H-32-28

113
114
117
118
121
130
136
143
150

1/4
5/16
3/8
1/2
5/8
3/4
1

H-32-4
P-28-5
P-28-6
P-28-8
P-28-10
P-28-12
P-28-16

117
113
115
115
117
117
121

(A)

#10 #1

(.1935 .2280)

3/ F
16

(.1875 .2570)

AL

.3766
.3763

(.1875 .3160)

M 11/32

3/
8

.4392 7
/

(.2340 .2900) .4389

3/ O
16

Unground
Size
(B)

.5017
.5014

.5642

(.2950 .3437) .5639

16

1/
2

.582
9/
16 .577

All bushings are finished ground unless the letter U appears with the
bushings type or the ANSI symbol.
* Counterbore, leaving correct drill bearing and chip clearance.
Metric sizes are available.

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

D R I L L

J I G

B U S H I N G S

Head Press-Fit
Type H
Finish Ground & Unground O.D.

Continued from previous page

Inside Diameter
Range
Size

Outside Diameter
Finish
Ground
Size

(A)

5/ 7/
16
16

(.3125 .4375)

5/ 17/
16
32

(.3125 .5312)

1/ 21/
2
32

(.5000 .6562)

1/ 49/
2
64

(.5000 .7656)

.6267
.6264

.7518
.7515

.8768
.8765

1.0018
1.0015

Length
Inches
(C)
1/4
5/16
3/8
1/2
5/8
3/4
1
13/8
11/2
13/4
21/8

H-40-4
H-40-5
H-40-6
H-40-8
H-40-10
H-40-12
H-40-16
H-40-22
H-40-24
H-40-28
H-40-34

117
113
114
114
117
117
121
136
140
145
154

1/4
5/16
3/8
1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8

H-48-4
H-48-5
H-48-6
H-48-8
H-48-10
H-48-12
H-48-16
H-48-20
H-48-22
H-48-24
H-48-28
H-48-34

121
115
117
117
119
121
125
138
138
141
146
156

.895
.890

1/2
5/8
3/4
1
11/4
13/8
11/2
13/4
21/8
21/2

H-56-8
H-56-10
H-56-12
H-56-16
H-56-20
H-56-22
H-56-24
H-56-28
H-56-34
H-56-40

126
126
127
130
135
135
141
149
156
172

1.020
1.015

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

H-64-8
H-64-12
H-64-16
H-64-22
H-64-24
H-64-28
H-64-34
H-64-40
H-64-48

128
128
132
136
147
153
166
181
230

Unground
Size
(B)

5/
8

3/
4

7/
8

Inside Diameter
ANSI
Symbol

.645
.640

.770
.765

Price
Code

Range
Size

Outside Diameter
Finish
Ground
Size

(A)

All bushings are finished ground unless the letter U appears with the
bushings type or the ANSI symbol.
* Counterbore, leaving correct drill bearing and chip clearance.
Metric sizes are available.
www.smithbearing.com

Unground
Size
(B)

Length
Inches
(C)

ANSI
Symbol

Price
Code

1.270
1.265

5/8
3/4
1
11/4
11/2
13/4
2

H-80-10
H-80-12
H-80-16
H-80-20
H-80-24
H-80-28
P-80-32

153
151
158
166
174
181
192

5/8 1-1/32
1.3772 3
1.395
(.6250 1.0312) 1.3768 1 /8 1.390

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

H-88-8
H-88-12
H-88-16
H-88-22
H-88-24
H-88-28
H-88-34
H-88-40
H-88-48

159
152
160
168
175
182
195
210
246

1 1-25/64
1.7523 3
1.770
(1.0000 1.3906) 1.7519 1 /4 1.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

H-112-12
H-112-16
H-112-22
H-112-24
H-112-28
H-112-34
H-112-40
H-112-48

187
177
187
191
196
212
224
258

1-3/8 1-49/64 2.2525

2.270
1
(1.3750 1.7656) 2.2521 2 /4 2.265

1
13/8
11/2
13/4
21/8
21/2
3

H-144-16
H-144-22
H-144-24
H-144-28
H-144-34
H-144-40
H-144-48

205
219
223
233
243
250
268

55/64 15/16

(.8594 .9375)

1.2520
1.2517

11/4

ANSI HEAD PRESS-FIT

HEAD DIMENSIONS
Body O.D.
(B)

(F)

(G)

5/32
13/64
1/4
5/16
3/8
13/32
7/16
1/2
9/16
5/8
3/4
7/8
1
1-1/4
1-3/8
1-3/4
2-1/4

1/4
19/64
23/64
27/64
1/2
1/2
9/16
39/64
11/16
51/64
59/64
1-7/64
1-15/64
1-1/2
1-39/64
1-63/64
2-31/64

3/32
3/32
3/32
1/8
3/32
5/32
3/32
7/32
3/32
7/32
7/32
1/4
5/16
1/4
3/8
3/8
3/8

tel. 800.932.0076 fax. 908.789.9429

85

D R I L L

J I G

B U S H I N G S

G
C

Fixed Renewable

Type F

N
B

M
H

Finish Ground O.D.

A Dia.

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

#80 #70

3/
16

(.0135 .0280)

.1875
.1873

#69 3/64

3/
16

(.0292 .0469)

.1875
.1873

#55 1/16

(.0520 .0625)

#52 #40

(.0635 .0980)

.1875
.1873

3/
16
.1875
.1873

#39 9/64

1/
4

(.0995 .1400)

.2500
.2498

#80 #70

(.0135 .0280)

5/
16
.3125
.3123

#69 3/64

5/
16

(.0292 .0469)

.3125
.3123

#55 1/16

5/
16

(.0520 .0625)

#52 #43

(.0635 .0890)

#42 #31

(.0935 .1200)

86

3/
16

.3125
.3123

5/
16
.3125
.3123

5/
16
.3125
.3123

Length
Inches
(C)

ANSI
Symbol

Price
Code

Lock
Screw
Clamps

*1/4
*5/16
*3/8
*1/2

F-12-4
F-12-5
F-12-6
F-12-8

233
235
237
238

LS-O

1/4
*5/16
*3/8
*1/2

F-12-4
F-12-5
F-12-6
F-12-8

214
216
219
221

LS-O

1/4
*5/16
*3/8
*1/2
*5/8
*3/4

F-12-4
F-12-5
F-12-6
F-12-8
F-12-10
F-12-12

182
184
186
187
191
197

1/4
*5/16
3/8
*1/2
*5/8
*3/4

F-12-4
F-12-5
F-12-6
F-12-8
F-12-10
F-12-12

141
142
144
147
151
154

1/4
5/16
*3/8
*1/2
*5/8
*3/4

F-16-4
F-16-5
F-16-6
F-16-8
F-16-10
F-16-12

136
136
138
141
146
150

TW-2

*1/4
*5/16
*3/8
*1/2
*3/4

F-20-4
F-20-5
F-20-6
F-20-8
F-20-12

233
235
237
238
260

FC-01
LS-1
RC-01

*5/16
*3/8
*1/2
*3/4

F-20-5
F-20-6
F-20-8
F-20-12

216
220
221
230

LS-1
FC-O1
FC-11
RC-O1

*5/16
*3/8
*1/2
*3/4

F-20-5
F-20-6
F-20-8
F-20-12

184
186
187
197

LS-1
FC-O1
FC-11
RC-O1

5/16
*3/8
*1/2
*3/4
*1

F-20-5
F-20-6
F-20-8
F-20-12
F-20-16

142
144
147
154
172

LS-1
FC-O1
FC-11
RC-O1

5/16
3/8
*1/2
*3/4
*1
*13/8

F-20-5
F-20-6
F-20-8
F-20-12
F-20-16
F-20-22

136
138
141
150
163
185

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

1/8 #10

(.1250 .1935)

#10 #1
LS-O

LS-O

(.1935 .2280)

AL

(.2340 .2900)

5/
16
.3125
.3123

3/
8
.3750
.3748

7/
16
.4375
.4373

#28 3/16

1/
2

(.1405 .1875)

.5000
.4998

#12 11/32

(.1890 .3437)

M 11/32

(.2950 .3437)

1/
2
.5000
.4998

9/
16
.5625
.5623

Length
Inches
(C)

ANSI
Symbol

Price
Code

5/16
3/8
1/2
5/8
*3/4
*1
*13/8

F-20-5
F-20-6
F-20-8
F-20-10
F-20-12
F-20-16
F-20-22

135
136
139
143
148
161
184

1/4
5/16
3/8
1/2
5/8
3/4
*1

F-24-4
F-24-5
F-24-6
F-24-8
F-24-10
F-24-12
F-24-16

117
120
122
125
126
128
135

1/4
5/16
3/8
1/2
5/8
3/4
*1

F-28-4
F-28-5
F-28-6
F-28-8
F-28-10
F-28-12
F-20-16

117
120
122
125
126
128
135

5/16
3/8
1/2
*3/4
*1
*13/8
*11/2
*13/4

F-32-5
F-32-6
F-32-8
F-32-12
F-32-16
F-32-22
F-32-24
F-32-28

126
128
130
135
142
152
157
164

LS-1
FC-01
FC-11
RC-O1

5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4

F-32-5
F-32-6
F-32-8
F-32-12
F-32-16
F-32-22
F-32-24
F-32-28

120
122
124
128
135
147
150
155

LS-1
FC-01
FC-11
RC-O1

1/4
5/16
3/8
1/2
5/8
3/4
1

F-36-4
F-36-5
F-36-6
F-36-8
F-36-10
F-36-12
F-36-16

117
120
122
125
126
128
135

* Counterbore, leaving correct drill bearing and chip clearance.

Metric sizes are available.
LS-1
FC-O1
FC-11
RC-O1

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Lock
Screw
Clamps

LS-1
FC-O1
FC-11
RC-O1

TW-2

TW-2

TW-2

D R I L L

J I G

B U S H I N G S

Fixed Renewable
Type F
Finish Ground O.D.
Continued from previous page

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

S 7/16

(.3480 .4375)

5/
8
.6250
.6248

3/
4

9/ 9/
32
16

(.2812 .5625)

35/ 21/
64
32

(.5469 .6562)

15/ 25/
32
32

(.4687 .7812)

.7500
.7498

7/
8
.8750
.8748

1
1.0000
.9998

Length
Inches
(C)

ANSI
Symbol

Price
Code

3/8
1/2
5/8
3/4
1
11/4

F-40-6
F-40-8
F-40-10
F-40-12
F-40-16
F-40-20

123
123
125
126
130
147

TW-2

3/8
1/2
3/4
1
13/8
11/2
13/4
21/8
*21/2
*3

F-48-6
F-48-8
F-48-12
F-48-16
F-48-22
F-48-24
F-48-28
F-48-40
F-48-28
F-48-48

122
123
126
130
147
151
156
166
226
257

FC-O1
FC-11
LS-1
RC-O1

1/2
5/8
3/4
1
11/4
11/2

F-56-8
F-56-10
F-56-12
F-56-16
F-56-22
F-56-24

135
136
136
141
148
152

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

F-64-8
F-64-12
F-64-16
F-64-22
F-64-24
F-64-28
F-64-34
F-64-40
F-64-48

135
136
141
148
153
161
177
234
259

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

Lock
Screw
Clamps

TW-7

23/ 11/
32
16

13/8

(.7187 1.0625)

1.3750
1.3747

31/ 113/
32
32

(.9687 1.4062)

111/32 17/8

(1.3437 1.8750)

FC-O2
FC-12
LS-2
RC-O2

Length
Inches
(C)

ANSI
Symbol

Price
Code

Lock
Screw
Clamps

3/4
1
13/8
11/2
13/4
21/8
21/2
3

F-88-12
F-88-16
F-88-22
F-88-24
F-88-28
F-88-34
F-88-40
F-88-48

164
175
184
190
198
212
244
266

LS-2
RC-O2

3/4
1
13/8
11/2
13/4
21/8
21/2
3

F-112-12
F-112-16
F-112-22
F-112-24
F-112-28
F-112-34
F-112-40
F-112-48

202
191
202
210
220
233
252
266

FC-3
FC-13
LS-3
RC-03

3/4
1
13/8
11/2
13/4
21/8
21/2
3

F-144-12
F-144-16
F-144-22
F-144-24
F-144-28
F-144-34
F-144-40
F-144-48

239
228
239
243
245
256
263
271

FC-3
FC-13
LS-3
RC-03

13/4
1.7500
1.7497

21/4
2.2500
2.2496

* Counterbore, leaving correct drill bearing and chip clearance.

Metric sizes are available.

DIMENSIONAL DATA
ANSI FIXED RENEWABLE HEAD DIMENSIONS

Body O.D.
(B)

(F)

(G)

(H)

(J)

3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-3/8
1-3/4
2-1/4

5/16
7/16
35/64
5/8
5/8
51/64
7/8
7/8
1-3/64
1-1/4
1-27/64
1-51/64
2-19/64
2-51/64

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8

3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16

3/32
9/64
11/64
15/64
15/64
19/64
23/64
23/64
27/64
31/64
19/32
25/32
1
1-1/4

www.smithbearing.com

(K)

(M)

(N)

11/64

5/8

11/16

17/64

3/4

25/32

25/64

7/8

57/64

1/2
11/16
7/8
1-1/8

1-7/64
1-19/64
1-41/64
1-57/64

1-9/64
1-21/64
1-33/64
1-49/64

tel. 800.932.0076 fax. 908.789.9429

(R)

Lock
Screw

17/64
23/64
1/2
29/64
29/64
5/8
37/64
37/64
3/4
53/64
59/64
1-7/64
1-25/64
1-41/64

LS-0
TW-2
LS-1
TW-2
TW-2
LS-1
TW-2
TW-2
LS-1
TW-7
LS-2
LS-2
LS-3
LS-3

87

D R I L L

J I G

B U S H I N G S

Slip-Fixed Renewable

Type SF

R
B
M

Finish Ground O.D.

A Dia.

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

#80 #70

3/
16

(.0135 .0280)

#69 3/64

(.0292 .0469)

3/
16
.1875
.1873

#55 1/16

3/
16

(.0520 .0625)

.1875
.1873

#52 #40

(.0635 .0980)

#39 9/64

(.0995 .1406)

#80 #70

(.0135 .0280)

3/
16
.1875
.1873

1/
4
.2500
.2498

5/
16
.3125
.3123

#69 3/64

5/
16

(.0292 .0469)

.3125
.3123

#55 1/16

(.0520 .0625)

#52 #43

(.0635 .0890)

#42 #31

(.0935 .1200)

88

.1875
.1873

5/
16
.3125
.3123

5/
16
.3125
.3123

5/
16
.3125
.3123

Length
Inches
(C)

ANSI
Symbol

Price
Code

Lock
Screw
Clamps

*1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4
1/4
*5/16
*3/8
*1/2
*5/8
*3/4

SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12
SF-12-4
SF-12-5
SF-12-6
SF-12-8
SF-12-10
SF-12-12

233
235
237
238
248
260
214
216
219
221
225
230
182
184
186
187
191
197
141
143
144
147
151
154

1/4
5/16
*3/8
*1/2
*5/8
*3/4

SF-16-4
SF-16-5
SF-16-6
SF-16-8
SF-16-10
SF-16-12

136
136
138
141
146
150

TW-2

*1/4
*5/16
*3/8
*1/2
*3/4

SF-20-4
SF-20-5
SF-20-6
SF-20-8
SF-20-12

233
235
237
238
260

LS-1
RC-01
RK-01
RK-11

*5/16
*3/8
*1/2
*3/4

SF-20-5
SF-20-6
SF-20-8
SF-20-12

216
219
221
230

LS-1
RC-O1
RK-01
RK-11

*5/16
*3/8
*1/2
*3/4

SF-20-5
SF-20-6
SF-20-8
SF-20-12

184
186
187
197

LS-1
RC-O1
RK-01
RK-11

5/16
*3/8
*1/2
*3/4
*1

SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-16

142
144
147
154
172

LS-1
RC-O1
RK-01
RK-11

5/16
3/8
*1/2
*3/4
*1
*13/8

SF-20-5
SF-20-6
SF-20-8
SF-20-12
SF-20-16
SF-20-22

136
138
141
150
163
185

LS-O

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

1/ #10
8

(.1250 .1935)

LS-O
#10 #1

(.1935 .2280)

5/
16
.3125
.3123

3/
8
.3750
.3748

LS-O
AL

(.2340 .2900)

7/
16
.4375
.4373

LS-O

#28 3/16

1/
2

(.1405 .1875)

.5000
.4998

#12 11/32

(.1890 .3437)

M 11/32

(.2950 .3437)

1/
2
.5000
.4998

9/
16
.5625
.5623

Length
Inches
(C)

ANSI
Symbol

5/16
3/8
1/2
5/8
*3/4
*1
*13/8

SF-20-5
SF-20-6
SF-20-8
SF-20-10
SF-20-12
SF-20-16
SF-20-22

135
136
139
143
148
161
184

1/4
5/16
*3/8
1/2
5/8
3/4
*1

SF-24-4
SF-24-5
SF-24-6
SF-24-8
SF-24-10
SF-24-12
SF-24-16

117
120
122
125
126
128
135

1/4
5/16
3/8
1/2
5/8
3/4
*1

SF-28-4
SF-28-5
SF-28-6
SF-28-8
SF-28-10
SF-28-12
SF-20-16

117
120
122
125
126
128
135

5/16
3/8
1/2
*3/4
*1
*13/8
*11/2
*13/4

SF-32-5
SF-32-6
SF-32-8
SF-32-12
SF-32-16
SF-32-22
SF-32-24
SF-32-28

126
128
130
135
143
152
157
164

5/16
3/8
1/2
3/4
*1
*13/8
*11/2
*13/4
*21/8

SF-32-5
SF-32-6
SF-32-8
SF-32-12
SF-32-16
SF-32-22
SF-32-24
SF-32-28
SF-32-34

120
122
124
128
135
147
150
155
221

1/4
5/16
3/8
1/2
5/8
3/4
1

SF-36-4
SF-36-5
SF-36-6
SF-36-8
SF-36-10
SF-36-12
SF-36-16

117
120
122
125
126
128
135

* Counterbore, leaving correct drill bearing and chip clearance.

Metric sizes are available.

LS-1
RC-O1
RK-01
RK-11

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

Price Lock
Code Screw
Clamps

LS-1
RC-O1
RK-01
RK-11

TW-2

TW-2

LS-1
RC-01
RK-01
RK-11

LS-1
RC-01
RK-01
RK-11

TW-2

D R I L L

J I G

B U S H I N G S

Slip-Fixed Renewable
Type SF
Finish Ground O.D.

Continued from previous page

Range
Size

Finish Ground
Size

(A)

(B)

S 7/16

5/
8

(.3480 .4375)

.6250
.6248

3/
4

9/ 9/
32
16

(.2812 .5625)

.7500
.7498

35/ 21/
64
32

7/
8

(.5469 .6562)

.8750
.8748

15/ 25/
32
32

(.4687 .7812)

1
1.0000
.9998

Length
Inches
(C)

ANSI
Symbol

Price
Code

Lock
Screw
Clamps

3/8
1/2
5/8
3/4
1
11/4

SF-40-6
SF-40-8
SF-40-10
SF-40-12
SF-40-16
SF-40-20

123
123
125
126
129
147

TW-2

3/8
1/2
3/4
1
13/8
11/2
13/4
21/8
*21/2
*3

SF-48-6
SF-48-8
SF-48-12
SF-48-16
SF-48-22
SF-48-24
SF-48-28
SF-48-34
SF-48-40
SF-48-48

122
123
126
130
147
151
156
166
226
257

LS-1
RC-01
RK-01
RK-11

1/2
5/8
3/4
1
13/8
11/2

SF-56-8
SF-56-10
SF-56-12
SF-56-16
SF-56-20
SF-56-24

135
136
137
141
148
153

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

SF-64-8
SF-64-12
SF-64-16
SF-64-22
SF-64-24
SF-64-28
SF-64-34
SF-64-40
SF-64-48

135
136
141
148
152
161
177
234
259

TW-7

LS-2
RC-02
RK-2
RK-12

Inside Diameter

Outside Diameter

Range
Size

Finish Ground
Size

(A)

(B)

23/ 11/
32
16

13/8

(.7187 1.0625)

1.3750
1.3747

31/ 113/
32
32

13/4

(.9687 1.4062)

1.7500
1.7497

111/32 17/8

21/4

(1.3437 1.8750)

2.2500
2.2496

Length
Inches
(C)

ANSI
Symbol

Price
Code

Lock
Screw
Clamps

3/4
1
13/8
11/2
13/4
21/8
21/2
3

SF-88-12
SF-88-16
SF-88-22
SF-88-24
SF-88-28
SF-88-34
SF-88-40
SF-88-48

164
175
184
190
198
212
244
266

LS-2
RC-O2
RK-2
RK-13

3/4
1
13/8
11/2
13/4
21/8
21/2
3

SF-112-12
SF-112-16
SF-112-22
SF-112-24
SF-112-28
SF-112-34
SF-112-40
SF-112-48

202
191
202
210
220
233
252
267

LS-3
RC-03
RK-3
RK-13

3/4
1
13/8
11/2
13/4
21/8
21/2
3

SF-144-12
SF-144-16
SF-144-22
SF-144-24
SF-144-28
SF-144-34
SF-144-40
SF-144-48

239
228
239
243
245
256
263
271

LC-3
RC-03
RK-3
RK-13

* Counterbore, leaving correct drill bearing and chip clearance.

Metric sizes are available.

DIMENSIONAL DATA
ANSI FIXED RENEWABLE HEAD DIMENSIONS

Body O.D.
(B)

(F)

(G)

(H)

(J)

(K)

3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1-3/8
1-3/4
2-1/4

5/16
7/16
35/64
5/8
5/8
51/64
7/8
7/8
1-3/64
1-1/4
1-27/64
1-51/64
2-19/64
2-51/64

3/16
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8

3/32
3/32
1/8
1/8
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
3/16

3/32
9/64
11/64
15/64
15/64
19/64
21/64
21/64
27/64
33/64
19/32
25/32
1
1-1/4

55
30
65
30
30
65
30
30
50
30
35
30
30
25

www.smithbearing.com

(M)

(N)
11/16

5/8
3/4

25/32

7/8

57/64

1-7/64
1-19/64
1-41/64
1-57/64

1-9/64
1-21/64
1-33/64
1-49/64

tel. 800.932.0076 fax. 908.789.9429

(R)

Lock
Screw

17/64
21/64
1/2
29/64
29/64
5/8
37/64
37/64
3/4
53/64
59/64
1-7/64
1-25/64
1-41/64

LS-0
TW-2
LS-1
TW-2
TW-2
LS-1
TW-2
TW-2
LS-1
TW-7
LS-2
LS-2
LS-3
LS-3

89

D R I L L

J I G

B U S H I N G S
C

Headless Liner

A
Dia.

Type L

Finish Ground & Unground O.D.

Inside Diameter
Range
Size

Outside Diameter
Finish
Ground
Size

(A)

3/
16

(.1876 .1879)

1/
4

(.2501 .2504)

5/
16

.4392 7
/16
.4389

.5017

(.3126 .3129) .5014

5/
16

.5642 9
/

(.3126 .3129) .5639

3/
8

(.3751 .3754)

7/
16

(.4377 .4380)

1/
2

(.5002 .5005)

9/
16

(.5627 .5630)

90

1/
2

.6267
.6264

.6267
.6264

.7518
.7515

.8768
.8765

16

5/
8

5/
8

3/
4

3/
4

Outside Diameter
Finish
Ground
Size

.327
.322

1/4
5/16
3/8
1/2
5/8
3/4

L-20-4
L-20-5
L-20-6
L-20-8
L-20-10
L-20-12

110
112
113
114
115
117

.453
.448

1/4
5/16
3/8
1/2
5/8
3/4

L-28-4
L-28-5
L-28-6
L-28-8
L-28-10
L-28-12

105
106
109
110
112
113

1/4
5/16
3/8
1/2
5/8
3/4
1
13/8

L-32-4
L-32-5
L-32-6
L-32-8
L-32-10
L-32-12
L-32-16
L-32-22

105
106
109
110
112
113
118
125

(.7503 .7506) 1.0015

L-36-4
L-36-5
L-36-6
L-36-8
L-36-10
L-36-12
L-36-16

110
105
107
107
109
110
112

(.8754 .8757)

.582
.577

1/4
5/16
3/8
1/2
5/8
3/4
1

.645
.640

1/4
5/16
3/8
1/2
5/8
3/4
1

L-40-4
L-40-5
L-40-6
L-40-8
L-40-10
L-40-12
L-40-16

110
105
107
107
109
110
112

.645
.640

1/4
5/16
3/8
1/2
5/8
3/4
1

L-40-4
L-40-5
L-40-6
L-40-8
L-40-10
L-40-12
L-40-16

110
105
107
107
109
110
112

.770
.765

5/16
3/8
1/2
3/4
1
13/8
11/2
13/4
21/8

L-48-5
L-48-6
L-48-8
L-48-12
L-48-16
L-48-22
L-48-24
L-48-28
L-48-34

106
110
110
112
114
125
128
132
142

.895
.890

5/16
3/8
1/2
5/8
3/4
1
11/4

L-56-5
L-56-6
L-56-8
L-56-10
L-56-12
L-56-16
L-56-20

119
121
115
117
117
119
124

.520
.515

Price
Code

Range
Size

Length
Inches
(C)

Unground
Size
(B)

.3141 5
/16
.3138

Inside Diameter
ANSI
Symbol

(A)

5/
8

(.6252 .6255)

3/
4

.8768
.8765

1.0018

7/
8

1.2520
1.2517

7/
8

11/4

1.3772 3
1 /8
(1.0004 1.0007) 1.3768

1 3/8
1.7523 3
1 /4
(1.3756 1.3760) 1.7519

1 3/4
2.2525 1
2 /4
(1.7508 1.7512) 2.2521

2 1/4
2.7526 3
2 /4
(2.2510 2.2515) 2.7522

tel. 800.932.0076 fax. 908.789.9429

Length
Inches
(C)

ANSI
Symbol

Price
Code

.895
.890

5/16
3/8
1/2
5/8
3/4
1
11/4

L-56-5
L-56-6
L-56-8
L-56-10
L-56-12
L-56-16
L-56-20

119
121
115
117
117
119
124

1.020
1.015

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

L-64-8
L-64-12
L-64-16
L-64-22
L-64-24
L-64-28
L-64-34
L-64-40
L-64-48

117
117
120
124
130
135
141
151
199

1.270
1.265

1/2
5/8
3/4
1
11/4
11/2

L-80-8
L-80-10
L-80-12
L-80-16
L-80-20
L-80-24

140
136
131
140
148
152

1.395
1.390

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

L-88-8
L-88-12
L-88-16
L-88-22
L-88-24
L-88-28
L-88-34
L-88-40
L-88-48

141
131
141
149
153
161
174
185
222

1.770
1.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

L-112-12
L-112-16
L-112-22
L-112-24
L-112-28
L-112-34
L-112-40
L-112-48

156
149
156
163
166
182
193
240

2.270
2.265

3/4
1
13/8
11/2
13/4
21/8
21/2
3

L-144-12
L-144-16
L-144-22
L-144-24
L-144-28
L-144-34
L-144-40
L-144-48

178
167
178
183
187
204
216
253

2.770
2.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

L-176-12
L-176-16
L-176-22
L-176-24
L-176-28
L-176-34
L-176-40
L-176-48

188
178
189
194
201
212
225
255

Unground
Size
(B)

www.smithbearing.com

D R I L L

J I G

B U S H I N G S

Head Liner
Type HL

Finish Ground & Unground O.D.

A Dia.

Inside Diameter
Range
Size

Outside Diameter
Finish
Ground
Size

(A)

5/
16

(.3126 .3129)

1/
2

(.5002 .5005)

3/
4

(.7503 .7506)

.5017
.5014

.7518
.7515

1.0018
1.0015

Length
Inches
(C)

ANSI
Symbol

Price
Code

.520
.515

5/16
3/8
1/2
3/4
1
13/8

HL-32-5
HL-32-6
HL-32-8
HL-32-12
HL-32-16
HL-32-22

114
117
117
121
135
149

.770
.765

5/16
3/8
1/2
3/4
1
13/8
11/2
13/4
21/8

HL-48-5
HL-48-6
HL-48-8
HL-48-12
HL-48-16
HL-48-22
HL-48-24
HL-48-28
HL-48-34

115
117
117
121
128
136
141
147
156

1.020
1.015

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

HL-64-8
HL-64-12
HL-64-16
HL-64-22
HL-64-24
HL-64-28
HL-64-34
HL-64-40
HL-64-48

126
130
133
136
143
151
161
177
228

1.395
1.390

1/2
3/4
1
13/8
11/2
13/4
21/8
21/2
3

HL-88-8
HL-88-12
HL-88-16
HL-88-22
HL-88-24
HL-88-28
HL-88-34
HL-88-40
HL-88-48

144
136
144
150
153
161
171
185
246

1.770
1.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

HL-112-12
HL-112-16
HL-112-22
HL-112-24
HL-112-28
HL-112-34
HL-112-40
HL-112-48

158
163
170
176
182
195
210
261

2.270
2.265

3/4
1
13/8
11/2
13/4
21/8
21/2
3

HL-144-12
HL-144-16
HL-144-22
HL-144-24
HL-144-28
HL-144-34
HL-144-40
HL-144-48

191
184
192
198
205
218
231
264

2.770
2.765

3/4
1
13/8
11/2
13/4
21/8
21/2
3

HL-176-12
HL-176-16
HL-176-22
HL-176-24
HL-176-28
HL-176-34
HL-176-40
HL-176-48

216
203
218
222
229
241
249
270

Unground
Size
(B)

1/
2

3/
4

1.3772 3
1 /8
(1.0004 1.0007) 1.3768

1 3/8
1.7523 3
1 /4
(1.3756 1.3760) 1.7519

1 3/4
2.2525 1
2 /4
(2.2510 2.2515) 2.2521

2 1/4
2.7526 3
2 /4
(2.2510 2.2515) 2.7522

www.smithbearing.com

ANSI HEAD
LINER HEAD DIMENSIONS
Body O.D.
(B)

(F)

(G)

1/2
3/4
1
1-3/8
1-3/4
2-1/4
2-3/4

5/8
7/8
1-1/8
1-1/2
1-7/8
2-3/8
2-7/8

3/32
3/32
1/8
1/8
3/16
3/16
3/16

I.D. TOLERANCES
ABS & ANSI STANDARD
Standard
Drill Sizes

I.D.

Tolerance

3/16 3/8
7/16 5/8
3/4
7/8 1
1-3/8
1-3/4
2-1/4

Nominal
Nominal
Nominal
Nominal
Nominal
Nominal
Nominal

+.0001 +.0004
+.0002 +.0005
+.0003 +.0006
+.0004 +.0007
+.0006 +.0010
+.0008 +.0012
+.0010 +.0015

All bushings are finished ground unless the letter U appears with the
bushings type or the ANSI symbol.

tel. 800.932.0076 fax. 908.789.9429

91

D R I L L

J I G

M I S C E L L A N E O U S

B U S H I N G S

H A R D WA R E

Lock Screws for

ANSI Carbide and
Extended Renewable
Bushings

Type LS Series
F

Standard
Part No.

(A)

(B)

(C)

(E)

(F)

Thread

LS-0
LS-1
LS-2
LS-3
LS-4
LS-5

7/16
5/8
7/8
1
1-1/16
1-1/8

3/16
3/8
3/8
7/16
7/16
7/16

5/16
5/8
5/8
3/4
3/4
3/4

.100
1/4
3/8
3/8
7/16
1/2

.097
.035
.197
.197
.228
.260

8-32
5/16 18
5/16 18
3/8 16
3/8 16
3/8 16

C
A

Lock Screws for

Thin Wall Renewable
Bushings

Type TW Series

Slotted
Part No.

(G)

(H)

(I)

(J)

(L)

Thread

TW-1
TW-2
TW-3
TW-4
TW-5
TW-7

3/16
1/4
3/8
1/2
5/8
3/8

3/32
1/8
3/16
1/4
5/16
3/16

3/16
1/4
1/4
3/8
3/8
3/8

5/16
3/8
7/16
9/16
5/8
5/8

1/4
1/4
5/16
3/8
3/8
3/8

8-32
10-32
10-32
5/16 18
5/16 18
5/16 18

Custom Bushings and Accessories Manufactured to Your Requirements

Miscellaneous Hardware
Round Clamps for F Type Renewable Bushings
Extended Range Bushings Finish Ground and Unground O.D.
Oil Groove Applications that require lubrication
Thin Wall Bushings

92

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

SMITH BEARING

I N T E R C H A N G E

C H A R T S

SMITH BEARING is a registered trademark of ABC Accurate Bushing Company

1
CAM FOLLOWERS (Needle Roller Yoke Type & Stud Type)
INCH Sizes - Yoke Type & Stud Type Unsealed .........................................

94

INCH Sizes - Yoke Type & Stud Type Sealed .............................................

95

Stainless Steel .............................................................................................

96

Non-Metallic Bushing...................................................................................

97

METRIC Sizes - Yoke Type & Stud Type ........................................................

98

NUKR Metric Yoke Double Row Heavy Roller Full Complement

99

MUTD Metric Stud Double Row Heavy Roller Full Complement

99

SMITH-TRAX
Inch Smith-Trax ...........................................................................................

100

Metric Smith-Trax ........................................................................................

101

AEROSPACE Bearings

102-103

MS21438/YAF

Airframe Track Rollers Needle Bearings - Single Row

MS21439/YAT

Airframe Track Rollers Needle Bearings - Double Row

MS24465/YAD

Airframe Track Rollers Needle Bearings - Single Row

MS24466/YAS

Airframe Track Rollers Needle Bearings - Double Row

MS24461/YAG

Bearings, Roller, Needle, Heavy Duty - Single Row

MS21432/HRS

Airframe Integral Stud

MS21447/CHRS

Airframe Integral Stud - Crowned

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

93C

Cam Followers (Needle Rollers) INCH SIZES

I N T E R C H A N G E

Unsealed

T A B L E S

Cam Followers

Heavy Stud Unsealed

Regular Stud Unsealed

SMITH
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR

1/2-A
1/2
9/16
5/8-A
5/8
11/16
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

McGill
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF

RBC

1/2-N
1/2
9/16
5/8-N
5/8
11/16
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Torrington

S 16
S 18

S 20
S 22
S 24
S 28
S 32
S 36
S 40
S 44
S 48
S 52
S 56
S 60
S 64
S 72
S 80
S 88
S 96
S 104
S 112
S 128
S 160
S 192

CR 8
CR 8-1

CR 10
CR 10-1

CR 12
CR 14
CR 16
CR 18
CR 20
CR 22
CR 24
CR 26
CR 28
CR 30
CR 32
CR 36
CR 40
CR 44
CR 48
CR 52
CR 56
CR 64
CR 80
CR 96

RBC

Torrington

SMITH
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR

1/2
5/8
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4

McGill
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH

1/2
5/8
3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4

RBC
H-16
H-20
H-24
H-28
H-32
H-36
H-40
H-44
H-48
H-52
H-56
H-60
H-64
H-72
H-80
H-88
H-96
H-104
H-112
H-128

Yoke Roller Unsealed

SMITH
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR

3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Optional Features
Hex-Drive
Eccentric
Crowned O.D.
Thrust Seal

94

McGill
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR

3/4
7/8

1
11/8
11/4
13/8
11/2
15/8
13/4
17/8
2
21/4
21/2
23/4
3
31/4
31/2
4
5
6

Y-24
Y-28
Y-32
Y-36
Y-40
Y-44
Y-48
Y-52
Y-56
Y-60
Y-64
Y-72
Y-80
Y-88
Y-96
Y-104
Y-112
Y-128
Y-160
Y-192

SMITH
Add
Add
Add
Add

Suffix
Suffix
Suffix
Suffix

YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR
YCR

12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

McGill
B
E
C
L

Add Suffix B
Add Suffix E
Add Prefix C

tel. 800.932.0076 fax. 908.789.9429

RBC
Add Suffix W
Add Suffix X
Add Prefix C
Replace S with L
www.smithbearing.com

Torrington
Add Prefix B
Add Prefix E
Add Prefix C

INCH SIZES

Cam Followers (Needle Rollers)

I N T E R C H A N G E

Sealed

Cam Followers

Regular Stud Sealed

SMITH
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR
CR

1/2-X
9/16

Heavy Stud Sealed

McGill

1/2-AX

-X

5/8-AX
5/8

-X
11/16 -X
3/4 -X
7/8 -X
1-X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5 -X
6 -X

CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF
CF

T A B L E S

RBC

1/2-N-S
1/2

-S
9/16 -S
5/8-N-S
5/8 -S
11/16 -S
3/4 -S
7/8 -S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3- S
31/4 -S
31/2 -S
4 -S
5 -S
6 -S

S 16 -S
S 18 -S

S 20 -S
S 22 -S
S 24 -S
S 28 -S
S 32 -S
S 36 -S
S 40 -S
S 44 -S
S 48 -S
S 52 -S
S 56 -S
S 60 -S
S 64 -S
S 72 -S
S 80 -S
S 88 -S
S 96 -S
S 104 -S
S 112 -S
S 128 -S
S 160 -S
S 192 -S

Torrington
CRS
CRS

CRS
CRS

CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS
CRS

8
8-1
10
10-1
12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

SMITH
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR
HR

1/2

-X
-X
3/4 -X
7/8 -X
1 -X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5/8

McGill
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH
CFH

1/2

RBC

-S
-S
3/4 -S
7/8 -S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3 -S
31/4 -S
31/2 -S
4 -S
5/8

H-16 -S
H-20 -S
H-24 -S
H-28 -S
H-32 -S
H-36 -S
H-40 -S
H-44 -S
H-48 -S
H-52 -S
H-56 -S
H-60 -S
H-64 -S
H-72 -S
H-80 -S
H-88 -S
H-96 -S
H-104 -S
H-112 -S
H-128 -S

Yoke Roller Sealed

SMITH
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR
YR

3/4

-X
-X
1 -X
11/8 -X
11/4 -X
13/8 -X
11/2 -X
15/8 -X
13/4 -X
17/8 -X
2 -X
21/4 -X
21/2 -X
23/4 -X
3 -X
31/4 -X
31/2 -X
4 -X
5 -X
6 -X

7/8

Optional Features
Hex-Drive
Eccentric
Crowned O.D.
Thrust Seal

McGill
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR
CYR

RBC

3/4

-S
-S
1 -S
11/8 -S
11/4 -S
13/8 -S
11/2 -S
15/8 -S
13/4 -S
17/8 -S
2 -S
21/4 -S
21/2 -S
23/4 -S
3 -S
31/4 -S
31/2 -S
4 -S
5 -S
6 -S
7/8

Y-24 -S
Y-28 -S
Y-32 -S
Y-36 -S
Y-40 -S
Y-44 -S
Y-48 -S
Y-52 -S
Y-56 -S
Y-60 -S
Y-64 -S
Y-72 -S
Y-80 -S
Y-88 -S
Y-96 -S
Y-104 -S
Y-112 -S
Y-128 -S
Y-160 -S
Y-192 -S

SMITH
Add
Add
Add
Add

Suffix
Suffix
Suffix
Suffix

Torrington
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS
YCRS

12
14
16
18
20
22
24
26
28
30
32
36
40
44
48
52
56
64
80
96

McGill
B
E
C
L

www.smithbearing.com

Add Suffix B
Add Suffix E
Add Prefix C

RBC
Add Suffix W
Add Suffix X
Add Prefix C
Replace S with L

tel. 800.932.0076 fax. 908.789.9429

Torrington
Add Prefix B
Add Prefix E
Add Prefix C

95

Cam Followers (Needle Rollers) INCH SIZES

I N T E R C H A N G E

Stainless Steel

T A B L E S

Cam Followers

Regular Stud Hex Socket

Regular Stud Screw-Driver Slot

Carter

SMITH

McGill

Carter

CF-1/2 -B-CR
CF-5/8 -B-CR
CF-3/4 -B-CR
CF-7/8 -B-CR

CF-1-CR
CF-11/8 -CR
CF-11/4 -CR
CF-13/8 -CR
CF-11/2 -CR
CF-15/8 -CR
CF-13/4 -CR
CF-17/8 -CR
CF-2 -CR
CF-21/4 -CR
CF-21/2 -CR
CF-23/4 -CR
CF-3 -CR
CF-4 -CR

SC-16
SC-20
SC-24
SC-28
SC-32
SC-36
SC-40
SC-44
SC-48
SC-52
SC-56
SC-60
SC-64
SC-72

CR-1/2 -B-SS
CR-5/8 -B-SS
CR-3/4-B-SS
CR-7/8 -B-SS
CR-1-B-SS
CR-11/8 -B-SS
CR-11/4 -B-SS
CR-13/8 -B-SS
CR-11/2 -B-SS
CR-15/8 -B-SS
CR-13/4 -B-SS
CR-17/8 -SS
CR-2-B-SS
CR-21/4 -B-SS
CR-21/2-B-SS
CR-23/4 -B-SS
CR-3-B-SS
CR-4-B-SS

CF-1-B-CR
CF-11/8 -B-CR
CF-11/4 -B-CR
CF-13/8 -B-CR
CF-11/2 -B-CR
CF-15/8 -B-CR
CF-13/4 -B-CR
CF-17/8 -B-CR
CF-2 -B-CR
CF-21/4 -B-CR
CF-21/2 -B-CR
CF-23/4 -B-CR
CF-3-B-CR
CF-4-B-CR

SC-16-B
SC-20-B
SC-24-B
SC-28-B
SC-32-B
SC-36-B
SC-40-B
SC-44-B
SC-48-B
SC-52-B
SC-56-B
SC-60-B
SC-64-B
SC-72-B

SMITH

McGill

Carter

YR-3/4 -SS
YR-7/8 -SS

CYR-3/4 -CR
CYR-7/8 -CR

YR-1 -SS
YR-11/8 -SS
YR-11/4 -SS
YR-13/8 -SS
YR-11/2 -SS
YR-15/8 -SS
YR-13/4 -SS
YR-17/8 -SS
YR-2-SS
YR-21/4 -SS

CYR-1 -CR
CYR-11/8 -CR
CYR-11/4 -CR
CYR-13/8 -CR
CYR-11/2 -CR
CYR-15/8 -CR
CYR-13/4 -CR
CYR-17/8 -CR
CYR-2 -CR

SY-24
SY-28
SY-32
SY-36
SY-40
SY-44
SY-48
SY-52
SY-56
SY-60
SY-64
SY-72

SMITH

McGill

CR-1/2 -SS
CR-5/8 -SS
CR-3/4 -SS
CR-7/8 -SS

CF-1/2 -CR
CF-5/8 -CR
CF-3/4 -CR
CF-7/8 -CR

CR-1-SS
CR-11/8 -SS
CR-11/4 -SS
CR-13/8 -SS
CR-11/2 -SS
CR-15/8 -SS
CR-13/4 -SS
CR-17/8 -SS
CR-2-SS
CR-21/4 -SS
CR-21/2 -SS
CR-23/4 -SS
CR-3-SS
CR-4-SS

Yoke Type

96

tel. 800.932.0076 fax. 908.789.9429

Coding for Other Features

Optional Feature

SMITH

Sealed
Hex-Drive

McGILL

Carter

add suffix X

add suffix S

add suffix S

add suffix B

add suffix B

add suffix B

www.smithbearing.com

INCH SIZES

Cam Followers (Needle Rollers)

I N T E R C H A N G E

T A B L E S

Cam Followers with

Non-Metallic Bushing

Stud Type Hex Socket

Stud Type Screw-Driver Slot

SMITH

McGill

BCR-1/2
BCR-5/8
BCR-11/16
BCR-3/4
BCR-7/8

BCF-1/2
BCF-5/8
BCF-11/16
BCF-3/4
BCF-7/8

BCR-1
BCR-11/8
BCR-11/4
BCR-13/8
BCR-11/2
BCR-15/8
BCR-13/4
BCR-17/8
BCR-2
BCR-21/4
BCR-21/2
BCR-23/4
BCR-3

BCF-1
BCF-11/8
BCF-11/4
BCF-13/8
BCF-11/2
BCF-15/8
BCF-13/4
BCF-17/8
BCF-2
BCF-21/4
BCF-21/2
BCF-23/4
BCF-3

N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A

SMITH

McGill

Carter

BYR-3/4
BYR-7/8
BYR-1
BYR-11/8
BYR-11/4
BYR-13/8
BYR-11/2
BYR-15/8
BYR-13/4
BYR-17/8
BYR-2
BYR-21/4
BYR-21/2
BYR-23/4
BYR-3

BCYR-3/4
BCYR-7/8
BCYR-1
BCYR-11/8
BCYR-11/4
BCYR-13/8
BCYR-11/2
BCYR-15/8
BCYR-13/4
BCYR-17/8
BCYR-2
BCYR-21/4
BCYR-21/2
BCYR-23/4
BCYR-3

NYR-24-A
NYR-28-A
NYR-32-A
NYR-36-A
NYR-40-A
NYR-44-A
NYR-48-A
NYR-52-A
NYR-56-A
NYR-60-A
NYR-64-A
NYR-72-A
NYR-80-A
NYR-88-A
NYR-96-A

Carter

Yoke Type

www.smithbearing.com

SMITH

McGill

BCR-1/2 -B
BCR-5/8 -B
BCR-11/16 -B
BCR-3/4 -B
BCR-7/8 -B

BCF-1/2 -B
BCF-5/8 -B
BCF-11/16 -B
BCF-3/4 -B
BCF-7/8 -B

BCR-1 -B
BCR-11/8 -B
BCR-11/4 -B
BCR-13/8 -B
BCR-11/2 -B
BCR-15/8 -B
BCR-13/4 -B
BCR-17/8 -B
BCR-2-B
BCR-21/4 -B
BCR-21/2 -B
BCR-23/4 -B
BCR-3 -B

BCF-1 -B
BCF-11/8 -B
BCF-11/4 -B
BCF-13/8 -B
BCF-11/2 -B
BCF-15/8 -B
BCF-13/4 -B
BCF-17/8 -B
BCF-2 -B
BCF-21/4 -B
BCF-21/2 -B
BCF-23/4 -B
BCF-3 -B

Carter
SFH-16-A
SFH-20-A
SFH-22-A
SFH-24-A
SFH-28-A
SFH-32-A
SFH-36-A
SFH-40-A
SFH-44-A
SFH-48-A
SFH-52-A
SFH-56-A
SFH-60-A
SFH-64-A
SFH-72-A
SFH-80-A
SFH-88-A
SFH-96-A

Coding for Other Features

Optional Feature

SMITH

McGILL

Sealed

add suffix X

add suffix S

tel. 800.932.0076 fax. 908.789.9429

97

METRIC SIZES

Metric

Cam Followers (Needle Rollers)

Cam Followers

STUD TYPE Caged & Full Complement

SMITH

McGILL

Caged

Full
Complement

MCR-13
MCR-16
MCR-19
MCR-22

MCR-26

MCR-30
MCR-32
MCR-35
MCR-40

MCR-47

MCR-52

MCR-62

MCR-72

MCR-80
MCR-85
MCR-90

MCRV-13
MCRV-16
MCRV-19
MCRV-22

MCRV-26

MCRV-30
MCRV-32
MCRV-35
MCRV-40

MCRV-47

MCRV-52

MCRV-62

MCRV-72

MCRV-80
MCRV-85
MCRV-90

INA SKF NTN

Caged

Full
Complement

MCFR-13
MCFR-16
MCFR-19
MCFR-22
MCFR-22-A
MCFR-26
MCFR-26-A
MCFR-30
MCFR-32
MCFR-35
MCFR-40
MCFR-40-A
MCFR-47
MCFR-47-A
MCFR-52
MCFR-52-A
MCFR-62
MCFR-62-A
MCFR-72
MCFR-72-A
MCFR-80
MCFR-85
MCFR-90

MCF-13
MCF-16
MCF-19
MCF-22
MCF-22A
MCF-26
MCF-26A
MCF-30
MCF-32
MCF-35
MCF-40
MCF-40A
MCF-47
MCF-47A
MCF-52
MCF-52A
MCF-62
MCF-62A
MCF-72
MCF-72A
MCF-80
MCF-85
MCF-90

IKO THK

Caged

Full
Complement

Caged

Full
Complement

KR-16
KR-19
KR-22

KR-26

KR-30
KR-32
KR-35
KR-40

KR-47

KR-52

KR-62

KR-72

KR-80
KR-85
KR-90

KRV-16
KRV-19
KRV-22

KRV-26

KRV-30
KRV-32
KRV-35
KRV-40

KRV-47

KRV-52

KRV-62

KRV-72

KRV-80

KRV-90

CF5
CF6R
CF8R

CF10R

CF10-1R
CF12R
CF12-1R
CF16R

CF18R

CF20-1R

CF20R

CF24R

CF24-1R
CF30R
CF30-1R
CF30-2R

CF6VR
CF8VR

CF10VR

CF10-1VR
CF12VR
CF12-1VR
CF16VR

CF18VR

CF20-1VR

CF20VR

CF24VR

CF24-1VR
CF30VR
CF30-1VR
CF30-2VR

Coding for Other Cam Followers and Yoke Roller Types

Optional Features

SMITH

Sealed
Cylindrical O.D.
Hex-Drive
Eccentric

add suffix S
add suffix C
add suffix B
add suffix E

McGILL
add suffix S
add suffix X
add suffix B
add prefix E

INA SKF

IKO

THK

NTN

add suffix PP
add suffix X
add suffix SK
add prefix E

add suffix UU
remove suffix R
add suffix B
add prefix E

add suffix UU
remove suffix R
add suffix A

add suffix LL
add suffix X
add suffix H

YOKE TYPE Caged & Full Complement

SMITH
McGILL

98

Caged

Full
Complement

MYR-5
MYR-6
MYR-8
MYR-10
MYR-12
MYR-15
MYR-17
MYR-20
MYR-25
MYR-30
MYR-35
MYR-40
MYR-45
MYR-50

MYRV-5
MYRV-6
MYRV-8
MYRV-10
MYRV-12
MYRV-15
MYRV-17
MYRV-20
MYRV-25
MYRV-30
MYRV-35
MYRV-40
MYRV-45
MYRV-50

Caged
MCYRR-5
MCYRR-6
MCYRR-8
MCYRR-10
MCYRR-12
MCYRR-15
MCYRR-17
MCYRR-20
MCYRR-25
MCYRR-30
MCYRR-35
MCYRR-40
MCYRR-45
MCYRR-50

INA SKF NTN

Full
Complement
MCYR-5
MCYR-6
MCYR-8
MCYR-10
MCYR-12
MCYR-15
MCYR-17
MCYR-20
MCYR-25
MCYR-30
MCYR-35
MCYR-40
MCYR-45
MCYR-50

Caged
NATR-5
NATR-6
NATR-8
NATR-10
NATR-12
NATR-15
NATR-17
NATR-20
NATR-25
NATR-30
NATR-35
NATR-40
NATR-45
NATR-50

tel. 800.932.0076 fax. 908.789.9429

IKO THK

Full
Complement

Caged

NATV-5
NATV-6
NATV-8
NATV-10
NATV-12
NATV-15
NATV-17
NATV-20
NATV-25
NATV-30
NATV-35
NATV-40

NATV-50

NART-5R
NART-6R
NART-8R
NART-10R
NART-12R
NART-15R
NART-17R
NART-20R
NART-25R
NART-30R
NART-35R
NART-40R
NART-45R
NART-50R

www.smithbearing.com

Full
Complement
NART-5VR
NART-6VR
NART-8VR
NART-10VR
NART-12VR
NART-15VR
NART-17VR
NART-20VR
NART-25VR
NART-30VR
NART-35VR
NART-40VR
NART-45VR
NART-50VR

METRIC SIZES

Cam Followers

Metric

Double Row
Needle Rollers

Cam Followers

Double Row Heavy Rollers Screwdriver Slot Shielded Full Complement

SMITH INA

McGILL

NUKR-35
NUKR-40
NUKR-47
NUKR-52
NUKR-62
NUKR-72
NUKR-80
NUKR-85
NUKR-90

MCFD-35
MCFD-40
MCFD-47
MCFD-52
MCFD-62
MCFD-72
MCFD-80
MCFD-85
MCFD-90

Double Row Heavy Rollers Yoke Type Shielded Full Complement

SMITH

McGILL

MUTD-15
MUTD-17
MUTD-1542
MUTD-1747
MUTD-20
MUTD-2052
MUTD-25
MUTD-2562
MUTD-30
MUTD-3072
MUTD-35
MUTD-3580
MUTD-40
MUTD-45
MUTD-4090
MUTD-50
MUTD-45100
MUTD-50110

www.smithbearing.com

MCYRD-15
MCYRD-17
MCYRD-1542
MCYRD-1747
MCYRD-20
MCYRD-2052
MCYRD-25
MCYRD-2562
MCYRD-30
MCYRD-3072
MCYRD-35
MCYRD-3580
MCYRD-40
MCYRD-45
MCYRD-4090
MCYRD-50
MCYRD-45100
MCYRD-50110

INA
NUTR-15
NUTR-17
NUTR-1542
NUTR-1747
NUTR-20
NUTR-2052
NUTR-25
NUTR-2562
NUTR-30
NUTR-3072
NUTR-35
NUTR-3580
NUTR-40
NUTR-45
NUTR-4090
NUTR-50
NUTR-45100
NUTR-50110

tel. 800.932.0076 fax. 908.789.9429

99

SMITH-TRAX Interchange

INCH SIZES
PCR

FCR

VCR

UCR

PYR

VYR

FYR

Tr a c k R o l l e r B e a r i n g s

Yo k e Tr a c k R o l l e r B e a r i n g s

Plain Track Rollers

Plain Yoke Rollers

SMITH

McGill

Osborn

PCI

PCR-1-1/2
PCR-1-3/4
PCR-2
PCR-2-1/4
PCR-2-3/4
PCR-3
PCR-3-1/4
PCR-3-1/2
PCR-4
PCR-4-1/2
PCR-5
PCR-6
PCR-7
PCR-8

PCF-1-1/2
PCF-1-3/4
PCF-2
PCF-2-1/4
PCF-2-3/4
PCF-3
PCF-3-1/4
PCF-3-1/2
PCF-4
PCF-4-1/2
PCF-5
PCF-6
PCF-7
PCF-8

PLR-1-1/2
PLR-1-3/4
PLR-2
PLR-2-1/4
PLR-2-3/4
PLR-3
PLR-3-1/4
PLR-3-1/2
PLR-4
PLR-4-1/2
PLR-5
PLR-6
PLR-7
PLR-8

PTR-1.50
PTR-1.75
PTR-2.00
PTR-2.25
PTR-2.75
PTR-3.00
PTR-3.25
PTR-3.50
PTR-4.00
PTR-4.50
PTR-5.00
PTR-6.00
PTR-7.00
PTR-8.00

Flanged Track Rollers

SMITH
FCR-1-1/2
FCR-1-3/4
FCR-2
FCR-2-1/4
FCR-2-1/2
FCR-2-3/4
FCR-3
FCR-3-1/4
FCR-3-1/2
FCR-4
FCR-4-1/2
FCR-5
FCR-6
FCR-7
FCR-8

McGill

Osborn

PCI

FCF-1-1/2
FCF-1-3/4
FCF-2
FCF-2-1/4
FCF-2-1/2
FCF-2-3/4
FCF-3
FCF-3-1/4
FCF-3-1/2
FCF-4
FCF-4-1/2
FCF-5
FCF-6
FCF-7
FCF-8

FLR-1-1/2
FLR-1-3/4
FLR-2
FLR-2-1/4
FLR-2-1/2
FLR-2-3/4
FLR-3
FLR-3-1/4
FLR-3-1/2
FLR-4
FLR-4-1/2
FLR-5
FLR-6
FLR-7
FLR-8

FTR-1.50
FTR-1.75
FTR-2.00
FTR-2.25
FTR-2.50
FTR-2.75
FTR-3.00
FTR-3.25
FTR-3.50
FTR-4.00
FTR-4.50
FTR-5.00
FTR-6.00
FTR-7.00
FTR-8.00

SMITH

Osborn

PCI

PYR-3
PYR-3-1/4
PYR-3-1/2
PYR-4
PYR-5
PYR-6
PYR-7
PYR-8

PLRY-3
PLRY-3-1/4
PLRY-3-1/2
PLRY-4
PLRY-5
PLRY-6
PLRY-7
PLRY-8

PTRY-3.00
PTRY-3.25
PTRY-3.50
PTRY-4.00
PTRY-5.00
PTRY-6.00
PTRY-7.00
PTRY-8.00

Flanged Yoke Rollers

SMITH

Osborn

PCI

FYR-3
FYR-3-1/4
FYR-3-1/2
FYR-4
FYR-5
FYR-6
FYR-7
FYR-8

FLRY-3
FLRY-3-1/4
FLRY-3-1/2
FLRY-4
FLRY-5
FLRY-6
FLRY-7
FLRY-8

FTRY-3.00
FTRY-3.25
FTRY-3.50
FTRY-4.00
FTRY-5.00
FTRY-6.00
FTRY-7.00
FTRY-8.00

V-Grooved Yoke Rollers

SMITH

Osborn

VYR-4-1/2
VYR-5-1/2
VYR-6-1/2
VYR-7-1/2
VYR-8-1/2

VLRY-4-1/2
VLRY-5-1/2
VLRY-6-1/2
VLRY-7-1/2
VLRY-8-1/2

PCI
VTRY-4.50
VTRY-5.50
VTRY-6.50
VTRY-7.50
VTRY-8.50

V-Grooved Track Rollers

SMITH

McGill

Osborn

PCI

VCR-3-1/2
VCR-4-1/2
VCR-5-1/2
VCR-6-1/2
VCR-7-1/2
VCR-8-1/2

VCF-3-1/2
VCF-4-1/2
VCF-5-1/2
VCF-6-1/2
VCF-7-1/2
VCF-8-1/2

VLR-3-1/2
VLR-4-1/2
VLR-5-1/2
VLR-6-1/2
VLR-7-1/2
VLR-8-1/2

VTR-3.50
VTR-4.50
VTR-5.50
VTR-6.50
VTR-7.50
VTR-8.50

U-Grooved Track Rollers

100

SMITH

McGill

Osborn

PCI

UCR-2-15/16-1
UCR-2-15/16-2
UCR-2-15/16-3
UCR-2-15/16-4
UCR-2-15/16-5
UCR-2-15/16-6
UCR-2-15/16-7
UCR-2-15/16-8
UCR-2-15/16-9
UCR-2-15/16-10

UCF-2-15/16-1
UCF-2-15/16-2
UCF-2-15/16-3
UCF-2-15/16-4
UCF-2-15/16-5
UCF-2-15/16-6
UCF-2-15/16-7
UCF-2-15/16-8
UCF-2-15/16-9
UCF-2-15/16-10

ULR-2-15/16-A
ULR-2-15/16-B
ULR-2-15/16-C
ULR-2-15/16-D
ULR-2-15/16-E
ULR-2-15/16-F
ULR-2-15/16-G
ULR-2-15/16-H
ULR-2-15/16-I
ULR-2-15/16-J

UTR-2.9375-A
UTR-2.9375-B
UTR-2.9375-C
UTR-2.9375-D
UTR-2.9375-E
UTR-2.9375-F
UTR-2.9375-G
UTR-2.9375-H
UTR-2.9375-I
UTR-2.9375-J

tel. 800.932.0076 fax. 908.789.9429

Coding for Other Track Rollers

Optional Feature

SMITH

Osborn

McGILL PCI

Eccentric Collar

add
suffix
E

add
prefix
E

add
prefix
E

www.smithbearing.com

add
prefix
E

MFCR

MPCR

MVCR

MPYR

Tr a c k R o l l e r B e a r i n g s
Plain Track Rollers
SMITH
MPCR-26
MPCR-30
MPCR-32
MPCR-35
MPCR-40
MPCR-47
MPCR-50
MPCR-52
MPCR-62
MPCR-72
MPCR-76
MPCR-80
MPCR-85
MPCR-90
MPCR-100
MPCR-125
MPCR-150
MPCR-200

MVCR-26
MVCR-32
MVCR-40
MVCR-62
MVCR-76
MVCR-100
MVCR-125

MVYR

Yo k e Tr a c k R o l l e r B e a r i n g s
Plain Yoke Rollers

Osborn

SMITH

HPC-26
HPC-30
HPC-32
HPC-35
HPC-40
HPC-47
HPC-50
HPC-52
HPC-62
HPC-72
HPC-76
HPC-80
HPC-85
HPC-90
HPC-100
HPC-125
HPC-150
HPC-200

MPYR-62
MPYR-76
MPYR-80
MPYR-85
MPYR-90
MPYR-100
MPYR-125
MPYR-150
MPYR-200
MPYR-250

V-Grooved Track Rollers

SMITH

MFYR

Osborn
HPCA-62
HPCA-76
HPCA-80
HPCA-85
HPCA-90
HPCA-100
HPCA-125
HPCA-150
HIPCA-200
HPCA-250

V-Grooved Yoke Rollers

SMITH

Osborn

MVYR-62
MVYR-76
MVYR-100
MVYR-125
MVYR-150
MVYR-200
MVYR-250

HPVA-62
HPVA-76
HPVA-100
HPVA-125
HPVA-150
HPVA-200
HPVA-250

Osborn
HPV-26
HPV-32
HPV-40
HPV-62
HPV-76
HPV-100
HPV-125

Flanged Yoke Rollers

Flanged Track Rollers

SMITH

Osborn

MFCR-26
MFCR-30
MFCR-32
MFCR-35
MFCR-40
MFCR-47
MFCR-50
MFCR-52
MFCR-62
MFCR-72
MFCR-76
MFCR-80
MFCR-85
MFCR-90
MFCR-100
MFCR-125
MFCR-150
MFCR-200

HPJ-26
HPJ-30
HPJ-32
HPJ-35
HPJ-40
HPJ-47
HPJ-50
HPJ-52
HPJ-62
HPJ-72
HPJ-76
HPJ-80
HPJ-85
HPJ-90
HPJ-100
HPJ-125
HPJ-150
HPJ-200

www.smithbearing.com

SMITH-TRAX Interchange

METRIC SIZES

SMITH

Osborn

MFYR-62
MFYR-76
MFYR-80
MFYR-85
MFYR-90
MFYR-100
MFYR-125
MFYR-150
MFYR-200
MFYR-250

HPJA-62
HPJA-76
HPJA-80
HPJA-85
HPJA-90
HPJA-100
HPJA-125
HPJA-150
HPJA-200
HPJA-250

Coding for Other Track Rollers

Optional Feature

SMITH

Osborn

Eccentric Collar

add
suffix
E

add
prefix
E

tel. 800.932.0076 fax. 908.789.9429

101

A E R O S P A C E

MILITARY
Standard Number

102

B E A R I N G S

TORRINGTON
Number

McGILL
Number

SMITH
Number

24465-3

3NBF512YJ

3NBF512YJ

YAD-03

24465-4

4NBF614YJ

4NBF614YJ

YAD-04

24465-6

6NBF817YJ

6NBF817YJ

YAD-06

24465-8

8NBF1021YJ

8NBF1021YJ

YAD-08

24465-10

10NBF1224YJ

10NBF1224YJ

YAD-10

24465-12

12NBF1628YJ

12NBF1628YJ

YAD-12

24465-14

14NBF1832YJ

14NBF1832YJ

YAD-14

24465-20

20NBF2040YJ

20NBF2040YJ

YAD-20

24465-24

24NBF2448YJ

24NBF2448YJ

YAD-24

24465-28

28NBF2455YJ

28NBF2455YJ

YAD-28

24465-32

32NBF2462YJ

32NBF2462YJ

YAD-32

24465-36

36NBF2469YJ

36NBF2469YJ

YAD-36

24465-40

40NBF2476YJ

40NBF2476YJ

YAD-40

24465-44

44NBF2480YJ

44NBF2476YJ

YAD-44

24466-6

6NBL1618YJ

6NBL1618YJ

YAS-06

24466-8

8NBL2022YJ

8NBL2022YJ

YAS-08

24466-10

10NBL2426YJ

10NBL2426YJ

YAS-10

24466-12

12NBL2830YJ

12NBL2830YJ

YAS-12

21432-3

HRS-1C

HRS-1C

HRS-1C

21432-4

HRS-2C

HRS-2C

HRS-2C

21432-5

HRS-3C

HRS-3C

HRS-3C

21432-6

HRS-4C

HRS-4C

HRS-4C

21432-7

HRS-5C

HRS-5C

HRS-5C

21432-8

HRS-6C

HRS-6C

HRS-6C

21447-3

CHRS-1C

CHRS-1C

CHRS-1C

21447-4

CHRS-2C

CHRS-2C

CHRS-2C

21447-5

CHRS-3C

CHRS-3C

CHRS-3C

21447-6

CHRS-4C

CHRS-4C

CHRS-4C

21447-7

CHRS-5C

CHRS-5C

CHRS-5C

21447-8

CHRS-6C

CHRS-6C

CHRS-6C

21438-103

ATF-3

3 AFC 512

YAF-03

21438-104

ATF-4

4 AFC 614

YAF-04

21438-106

ATF-6

6 AFC 817

YAF-06

21438-108

ATF-8

8 AFC 1021

YAF-08

21438-110

ATF-10

10 AFC 1224

YAF-10

21438-112

ATF-12

12 AFC 1628

YAF-12

tel. 800.932.0076 fax. 908.789.9429

www.smithbearing.com

A E R O S P A C E

MILITARY
Standard Number

TORRINGTON
Number

B E A R I N G S

McGILL
Number

SMITH
Number

21438-114

ATF-14

14 AFC 1832

YAF-14

21438-120

ATF-20

20 AFC 2040

YAF-20

21438-124

ATF-24

24 AFC 2448

YAF-24

21438-128

ATF-28

28 AFC 2455

YAF-28

21438-132

ATF-32

32 AFC 2462

YAF-32

21438-136

ATF-36

36 AFC 2469

YAF-36

21438-140

ATF-40

40 AFC 2476

YAF-40

21438-144

ATF-44

44 AFC 2480

YAF-44

21439-106

ATL-6

6 AL 1618

YAT-06

21439-108

ATL-8

8 AL 2022

YAT-08

21439-110

ATL-10

10 AL 2426

YAT-10

21439-112

ATL-12

12 AL 2830

YAT-12

24461-3

3NBC511ZP

3NBC511ZP

YAG-03-C

24461-4

4NBC612ZP

4NBC612ZP

YAG-04-C

24461-5

5NBC713ZP

5NBC713ZP

YAG-05-C

24461-6

6NBC914YZP

6NBC914YZP

YAG-06

24461-7

7NBC1015YZP

7NBC1015YZP

YAG-07

24461-8

8NBC1218YZP

8NBC1218YZP

YAG-08

24461-9

9NBC1419YZP

9NBC1419YZP

YAG-09

24461-10

10NBC1620YZP

10NBC1620YZP

YAG-10

24461-12

12NBC1822YZP

12NBC1822YZP

YAG-12

24461-14

14NBC2026YZP

14NBC2026YZP

YAG-14

24461-16

16NBC2028YZP

16NBC2028YZP

YAG-16

24461-20

20NBC2032YZP

20NBC2032YZP

YAG-20

24461-24

24NBC2036YZP

24NBC2036YZP

YAG-24

24461-28

28NBC2040YZP

28NBC2040YZP

YAG-28

24461-32

32NBC2044YZP

32NBC2044YZP

YAG-32

24461-36

36NBC2048YZP

36NBC2048YZP

YAG-36

24461-40

40NBC2052YZP

40NBC2052YZP

YAG-40

24461-44

44NBC2056YZP

44NBC2056YZP

YAG-44

24461-48

48NBC2060YZP

48NBC2060YZP

YAG-48

24461-52

52NBC2064YZP

52NBC2064YZP

YAG-52

24461-56

56NBC2070YZP

56NBC2070YZP

YAG-56

24461-60

60NBC2074YZP

60NBC2074YZP

YAG-60

24461-64

64NBC2078YZP

64NBC2078YZP

YAG-64

www.smithbearing.com

tel. 800.932.0076 fax. 908.789.9429

103

ENGINEERING - Notes
NAME

104

LOWERCASE

UPPERCASE

NAME

tel. 800.932.0076 fax. 908.789.9429

LOWERCASE

UPPERCASE

www.smithbearing.com

ENGINEERING - Notes
NAME

LOWERCASE

UPPERCASE

www.smithbearing.com

NAME

LOWERCASE

tel. 800.932.0076 fax. 908.789.9429

UPPERCASE

105

ENGINEERING - Notes
NAME

106

LOWERCASE

UPPERCASE

NAME

tel. 800.932.0076 fax. 908.789.9429

LOWERCASE

UPPERCASE

www.smithbearing.com

ENGINEERING - Notes
NAME

LOWERCASE

UPPERCASE

www.smithbearing.com

NAME

LOWERCASE

tel. 800.932.0076 fax. 908.789.9429

UPPERCASE

107

STANDARD TERMS & CONDITIONS OF SALE

1. ACCEPTANCE BY BUYER
Acceptance of this sales order or quotation by
buyer IS EXPRESSLY LIMITED TO THE TERMS AND
CONDITIONS HEREIN CONTAINED. Any item or
condition in any purchase order or other form in
conflict with the terms or conditions of this sales
order or quotation is hereby expressly rejected and
shall not be binding on Seller. If these terms and
conditions differ in any way from terms and
conditions of Buyers order, or other
documentation, this document will be construed
as a counteroffer and will not be deemed an
acceptance of Buyers terms and conditions which
conflict herewith. This quotation may be withdrawn
by Seller at any time prior to acceptance by Buyer
of each and every term and condition hereof, and
will expire automatically upon (90) days from the
date hereof unless accepted by Buyer. On all
orders, the prices shown and acknowledged at
the time of entry will be subject to revision in
accordance with Sellers price schedules in effect
at time of shipment. All sales, contracts and
orders become effective only when approved and
accepted in writing by Seller on Sellers sales order
or acknowledgment.
2. PRICES - Prices are
a) subject to change without notice prior to
acceptance of Buyers order by Seller, unless
quoted otherwise in writing by Seller.
b) exclusive of all federal, state, municipal or other
government excise, sales, use occupational or like
taxes now in force or to be enacted in the future.
c) subject to an increase equal in the amount to any
tax the Seller may be required to collect or pay
upon the sales of the items quoted.
d) quoted F.O.B., place of manufacture.
e) subject to change at any time by Seller in the
event of any change in the Buyers requirements
or the terms and conditions of this quotation.
3. TERMS
a) Invoices will be issued under date of shipment with
terms of net thirty (30) days from date of invoice,
subject to such change as Sellers home office
may impose because of financial or credit
conditions existing at time of shipment. In the
event of an order for several units, each unit will be
invoiced when shipped.
b) Seller reserves the right to modify these terms for
export business and special projects.
4. BUYERS CREDIT
If the financial responsibility of the Buyer becomes
impaired or unsatisfactory to Seller or if Buyer is in
default to Seller under this or any other contract,
advance cash payment or satisfactory security
shall be given by Buyer upon demand by Seller
and shipments may be withheld until such
payment or security is received.
5. SHIPPING ESTIMATES
a) The shipping date shown in this sales order or
quotation is approximate and dependent upon
prior sales and circumstances beyond Sellers
control.
b) Shipping date will be computed from the date or
receipt of all data require to enable complete
engineering or acceptance of buyers order as
provided in Section 1 above, whichever is later.
c) Every effort will be made to effect shipment within
the time stated, but Seller will not be liable for any
damages resulting directly or indirectly from fire,
embargo, strikes, or acts of God, civil strife or
insurrection, transportation delay, whether at
place of manufacture or elsewhere, or from delay
by reason of any rule, regulation or order of any
governmental authority directly affecting delivery
or from causes beyond sellers control.
d) Any changes in customers requirements will
require confirmation or revision of estimated
shipping date.

108

SMITH BEARING is a registered trademark of ABC Accurate Bushing Company

6. DELIVERY
All goods shall be shipped F.O.B. the stated
shipping point. Seller shall have the right to select
the carrier unless the carrier is designated by the
Buyer and upon delivery of the goods by the Seller
to the carrier, the carrier shall be deemed to be
the agent of the Buyer and thereafter risk of loss
shall be on the buyer.
7. WARRANTY
a) Seller warrants that the Buyer will receive good title
to the product and that such part of the product
manufactured by the Seller will be free from
defects which are not commercially acceptable
in material and workmanship for a period of ninety
(90) days from date of shipment, when used by
the Buyer in accordance with the instructions as to
maintenance and operation recommended by
Seller. In no event shall this warranty extend to or
obligate Seller in any way regarding parts or
components in the product not actually
manufactured by Seller, but Sellers warranty in
respect to any such parts and components
manufactured by others is hereby expressly limited
to the warranty of the original manufacturer of
such item or component. A copy of the original
manufacturers warranty of such items or products
will be submitted to the Buyer upon request.
b) This warranty is void and of no effect and Seller
shall not be liable for any breach of warranty,
express or implied. If the product or any part or
component thereof shall have been repaired or
altered by persons other than the Seller unless
expressly authorized in writing by the Seller, or if the
product is operated or installed contrary to Sellers
instructions or subjected to misuse, negligence or
accident.
c) THERE ARE NO OTHER WARRANTIES THAT EXTEND
BEYOND THE WARRANTY HEREIN CONTAINED and
no statement , oral or written, inconsistent with this
warranty is binding on Seller. No agent, employee
o representative of the Seller has any authority to
bind the Seller to any confirmation, representation
or warranty concerning the product that is the
subject of this quotation beyond that specifically
included in this written quotation or sales order.
Extension of or amendment of this warranty can
be made only in writing by a authorized officer of
the Seller.
d) This warranty is made IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, including
any warranty of MERCHANTABILITY or FITNESS
for a particular purpose.
e) Sellers remedy for breach of any warranty shall
be limited as in the next section provided.
8. REMEDY FOR BREACH OF WARRANTY AND
LIMITATION OF LIABILITY
a) Seller agrees to repair or replace without cost any
part of the product manufactured by the Seller
that, for the period of ninety (90) days specified
in Section 6 above, may prove upon Sellers
inspection, to be defective in material or
workmanship and not commercially acceptable.
b) Seller shall have the option to inspect any parts
claimed to be defective either at Sellers place of
business or Buyers place of business. No return
shall be accepted unless Seller has had an
opportunity to inspect the product or has
expressly authorized the return.
c) Under no circumstances shall Seller be liable for
consequential or incidental damages resulting
from any breach of warranty even though Seller
may have been advised of the possibility of such
damages. Sellers liability for breach of any
warranty shall not exceed the purchase price of
the product less the value of the product at any
time of acceptance.

tel. 800.932.0076 fax. 908.789.9429

d) Any claim for breach of Sellers warranty herein

contained must be made in writing addressed to
the Seller setting forth in sufficient detail to permit
identification of the defect. Any claim for breach of
warranty must be made within twelve (12) months
after installation on Buyers premises of the product.
If not made within said twelve (12) month period it
shall be conclusively deemed to have been
waived.
e) The remedies for breach of warranty herein
contained shall be exclusive.
9. RESERVATION OF RIGHTS IN RESPECT TO
SELLERS OTHER PRODUCTS
a) Seller reserves the right to make improvements and
changes in design upon its products without
imposing any obligation to make such changes or
improvements upon the product that is the subject
of this order or on product previously manufactured
and sold by it.
10. LIMITATION OF ACTIONS
Any action for breach of Sellers warranty must be
commenced within twelve (12) months from the
time the cause of actions accrues unless the period
for action shall be extended by Seller I writing. In
the interpretation of this limitation on action for
breach of Sellers warranty, it is expressly agreed
that there are no warranties of future performance
of the product that extend the period of limitation
herein contained for bringing an action.
11. CANCELLATION
In the event Buyer requests a Seller to stop work or
cancel the order or any part thereof, cancellation
charges shall be paid to Seller as follows:
a) Any and all work that is complete on the date of
notification in writing to stop work or to cancel shall
be invoiced and paid in full.
b) For work in process and any materials and supplies
procured or for which definite commitments have
been made by Seller in connection with the Buyer
shall pay the actual costs and overhead expenses
determined in accordance with good accounting
practices.
c) Buyer shall promptly instruct Seller as to the
disposition of the product and the latter shall, if
requested, hold the product for Buyers account.
All costs of storage, insurance handling, boxing or
other costs in connection therewith shall be borne
by the Buyer.
12. COMPLETE AGREEMENT
This quotation or sales order when accepted by the
Buyer without condition and acknowledgment of
receipt of the acceptance is given to the Buyer
shall constitute the entire agreement between the
Buyer and Seller and supersedes all proposals, oral
or written and all other communications between
the parties relating to the subject matter of this
quotation. No alteration or addition to this
quotation shall bind the Seller unless expressly
assented to in writing by a duly authorized officer
of the company.

www.smithbearing.com