Product data sheet
6ES7153-2BA02-0XB0
SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT
General information
Vendor identification (VendorID) 801Eh
Supply voltage
24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) permissible range (ripple included), lower limit (DC) permissible range (ripple included), upper limit (DC) External protection for supply cables (recommendation) Yes 20.4 V 28.8 V 20.4 V 28.8 V 2,5 A
Mains buffering
Mains/voltage failure stored energy time 5 ms
Input current
Current consumption, max. Inrush current, typ. It 650 mA 3A 0.1 As
Output voltage
Rated value, 5 V DC Yes
Output current
for backplane bus (5 V DC), max. 1.5 A
6ES7153-2BA02-0XB0 Page 1/ 3
04/04/2014
subject to modifications Copyright Siemens AG 2014
Power losses
Power loss, typ. 5.5 W
Address area Addressing volume
Inputs Outputs 244 byte 244 byte
Hardware configuration
Number of modules per DP slave interface, max. 12
Time stamping
Accuracy Number of message buffers Messages per message buffer Number of stampable digital inputs, max. Time format Time resolution Time interval for transmitting the message buffer if a message is present Time stamp on signal change 1 ms ; 1ms at up to 8 modules; 10ms at up to 12 modules 15 20 128 ; Max. 128 signals/station; max. 32 signals/slot RFC 1119 0.466 ns 1000 ms
rising / falling edge as signal entering or exiting
Interfaces
Interface physics, RS 485 Interface physics, FOC Yes No
PROFIBUS DP
Node addresses Automatic detection of transmission speed PROFIBUS DP, output current, max. Transmission rate, max. Transmission procedure SYNC capability FREEZE capability Direct data exchange (slave-to-slave communication) PROFIBUS DP 1 to 125 permitted Yes 70 mA 12 Mbit/s RS 485 Yes Yes Yes ; Sender 9-pin sub D
1st interface DP slave
GSD file Automatic baud rate search SI04801.GSG Yes
Communication functions
Bus protocol/transmission protocol PROFIBUS DP to EN 50170
Isolation
Isolation checked with Isolation voltage 500 V
6ES7153-2BA02-0XB0 Page 2/ 3
04/04/2014
subject to modifications Copyright Siemens AG 2014
Degree and class of protection
IP20 Yes
Ambient conditions Operating temperature
Min. max. 0 C 60 C
Air pressure
Operating altitude above sea level, max. 3000 m
Configuration Configuration software
STEP 7 Yes ; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Dimensions
Width Height Depth 40 mm 125 mm 117 mm
Weights
Weight, approx. Status 360 g Mar 29, 2014
6ES7153-2BA02-0XB0 Page 3/ 3
04/04/2014
subject to modifications Copyright Siemens AG 2014
