Scribd
Upload
67 views3 pages

Model M35 Incremental Optical Rotary Encoder: Electromate

The Model M35 is a high-resolution rotary encoder with a stainless steel housing. It can provide up to 360,000 counts per revolution and has dual read optics to cancel out errors from disc eccentricity. It is well-suited for applications requiring high precision like microlithography and machine tools.

Uploaded by

Electromate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
67 views3 pages

Model M35 Incremental Optical Rotary Encoder: Electromate

The Model M35 is a high-resolution rotary encoder with a stainless steel housing. It can provide up to 360,000 counts per revolution and has dual read optics to cancel out errors from disc eccentricity. It is well-suited for applications requiring high precision like microlithography and machine tools.

Uploaded by

Electromate
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MODEL M35

Incremental Optical Rotary Encoder










Our highest resolution rotary encoder
Stainless steel housing for thermal stability
Up to 360,000 counts per shaft revolution ( .001 or 3.6 arc seconds )
Dual read optics for disc eccentricity error cancellation
Internal cycle interpolation electronic factors of 2X, 5X, or 10X



The Model M35 is a 3.5 diameter incremental optical encoder designed for high-
resolution applications where thermal stability is a prime consideration. The Model
M35s stainless steel housing and dual read optical structure combine to offset the
effects of thermal expansion of bearing structure components while negating disk
eccentricity error. Available in resolutions to 360,000 counts per shaft revolution,
the Model M35 is well suited to applications in the fields of microlithography,
photogrammetry, antenna pedestal positioning, high resolution machine tools and
rotary table systems. Designed for easy mechanical and electrical interfacing. The
Model M35 can be provided with TTL square wave, Open Collector with or without
internal pull-ups and for high ambient noise and or long transmission length
applications Differential Line Driver.





ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]
Sold & Serviced By:

ELECTRICAL
Resolution range:

Light source:
Light sensor:
Excitation voltage:
Output format:
Quadrature:
Symmetry:
Rise and fall time:
Frequency response:
Zero reference width:
ZR alignment:


Phase sense:

Output:
Read station type:
Error:



MECHANICAL
Shaft loading:
Shaft run-out:
Starting torque:
Shaft angular acceleration:
Moment of inertia:
Bearing type:
Max. operating speed:

Slew speed:
Connector type:
Cable description:

Housing material:
Shaft material:



ENVIRONMENTAL

Operating temperature:
Storage temperature range:
Shock:
Vibration:
Humidity:










Up to 9,000 cycles per shaft revolution,
( 360,000 counts with internal interpolation and external quadrature ).
Gallium aluminum arsenide L.E.D. rated @ 100,000 Hrs. MTBF (mfgs spec).
Photodiode.
+5Vdc, +12Vdc, and +15Vdc 5%.
Two count channels ( A & B ) in phase quadrature with an optional ZR output.
90 22 ( at 10 KHz output frequency ).
180 18 ( at 10 KHz output frequency ).
1 microsecond max. into 1,000pf load capacitance.
150 KHz max. into a 1x line driver. 2x, 5x,10x interpolation at 100 KHz max. input.
1 1/2 cycle, 1/4 cycle or 1/2 cycle gated, depending on electronic configuration.
Full cycle: approximately centered on the rising edge of channel A.
1/2 cycle aligns with negative transition of channel B.
1/4 cycle aligns with both A & B high.
Channel A leads Channel B for counterclockwise rotation of the shaft,
as viewed from the cover side of the unit.
See part number table for available output options.
2 read stations 180 degrees apart for eccentricity error cancellation.
Instrument error 5 arc seconds maximum.





10 Lbs. Radial; 25 Lbs. Axial ( L10 life of 1 x 10 to 9
th
revs).
.0005 T.I.R.
5.0 oz. Inches max. at 25C.
100,000 radian / sec. squared (maximum).
0.004 oz. In. sec. squared.
Stainless steel radial shielded.
3000 RPM or max. operating frequency response of 150 KHz,
whichever occurs first.
3,000 RPM ( maximum).
MS3102R18-1P ( 10 conductor).
Individually shielded twisted pairs plus an overall shield.
Cable contains 11 conductors. Unused leads are cut at end of cable.
Stainless steel.
Stainless steel.





-40C to +85C
-50C TO +90C
50 G for 11 millisecond duration.
20 Hz to 2000 Hz @ 5 G.
To 98% R.H. ( non-condensing).


CABLE
WIRE
COLOR 10 PIN FUNCTION
ORANGE A CHANNEL +A
GREEN B CHANNEL -A
YELLOW C CHANNEL +B
BLUE D CHANNEL -B
BROWN E CHANNEL +ZR
GRAY F CHANNEL -ZR
BLACK J COMMON
RED I +VDC
VIOLET H CASE GROUND
M35 SPECIFICATIONS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]
Sold & Serviced By:








DRC ENCODER
CIRCUITRY
TYPES
AVAILABLE ZR
OPTIONS
TYPE A, U, Y 0, 1
TYPE 6, P 0, 1, 2, 4

Note: With P type electronics, terminating line
resistors must be greater than 430 ohms to qualify
for intrinsically safe operation.
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
[email protected]
Sold & Serviced By:

You might also like