100% found this document useful (5 votes)

7K views310 pages

Yamaha Rigging Guide 2012

Yamaha 2012 Rigging Guide

Uploaded by

Stephanie Hill

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

100% found this document useful (5 votes)

7K views310 pages

Yamaha Rigging Guide 2012

Yamaha 2012 Rigging Guide

Uploaded by

Stephanie Hill

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 310

2012

RIGGING GUIDE
Worldwide Edition

90894-62982-71

PREFACE
This rigging guide has been published to help Yamaha dealers set up Yamaha outboard-motors and
genuine accessories.
The information and/or materials is based on 2012 year models available at the time when this
guide has issued.
For US and Canada, the model name is expressed in the parenthesis for descriptive purposes.
In this guide, particularly important information is distinguished in the following ways,

WARNING
A WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.

NOTICE
A NOTICE indicates special precautions that must be taken to avoid damage to the products
or other property.

Specifications and descriptions are subject to change without notice.

The PDF file is available from the service portal site maintained by Yamaha Motor Co., Ltd.
The following contracted terms are expediently used on this guide.
ASSY; assembly
DERC; Digital Electronic Remote Control
EXT; extension
GND; ground
IG; ignition
NA; not applicable, not available
OP; optional
P/N; part number
PTT; power trim & tilt
PWR; power
RC; remote control
STR; steering
SW; switch
WW; Worldwide

Yamaha Motor Co., Ltd.

CONTENTS
INSTALLATION............................................................................................1-1
TOP COVER PICTOGRAPH DESCRIPTION...............................................................1-2
ENGINE OIL REMINDER LABEL (4-STROKE ENGINE) .............................................1-2
UNCRATING PROCEDURE (FOR TYPICAL STEEL FRAME) ....................................1-3
MOUNTING THE OUTBOARD MOTOR.......................................................................1-5
MOUNTING THE REMOTE OIL TANK.......................................................................1-11
OUTBOARD MOTOR DIMENSIONS..........................................................................1-12

PROPELLERS..............................................................................................2-1
PROPELLER SPECIFICATIONS..................................................................................2-2
PROPELLER SELECTION ...........................................................................................2-5
2012 PROPELLER APPLICATIONS ............................................................................2-5
WOT OPERATION RANGE TABLE ...........................................................................2-20

REMOTE CONTROLS .................................................................................3-1

REMOTE CONTROL APPLICATIONS .........................................................................3-2
REMOTE SWITCH APPLICATIONS ..........................................................................3-17
REMOTE CONTROL CABLES ...................................................................................3-32
REMOTE CONTROL ATTACHMENT KIT ..................................................................3-34
STEERING HOOK ......................................................................................................3-37
STEERING GUIDE ATTACHMENT KIT .....................................................................3-40
CONVENTIONAL WIRE HARNESS ...........................................................................3-42
DIGITAL ELECTRONIC REMOTE CONTROL WIRE HARNESS ..............................3-43

TILLER HANDLES .......................................................................................4-1

6X4 MULTI-FUNCTION TILLER HANDLE ...................................................................4-2
STEERING FRICTION CONTENTS ...........................................................................4-16

CONVENTIONAL GAUGE (6Y5 & 6Y7) ......................................................5-1

MOUNTING THE METERS ..........................................................................................5-4
ANALOG TACHOMETER .............................................................................................5-5
DIGITAL TACHOMETER ..............................................................................................5-7
SPEEDOMETER...........................................................................................................5-9
FUEL MANAGEMENT GAUGE ..................................................................................5-12
ANALOG TRIM METER ..............................................................................................5-18
COOLANT PRESSURE METER ................................................................................5-19
COOLANT TEMP. METER .........................................................................................5-20
HOUR METER ............................................................................................................5-25
VOLTAGE METER......................................................................................................5-27
FUEL METER .............................................................................................................5-28
CHARGE WARNING UNIT .........................................................................................5-29
WIRE HARNESSES....................................................................................................5-30
WIRING DIAGRAMS...................................................................................................5-34
RIGGING GROMMET DESCRIPTION .......................................................................5-45
To be continued.

CONTENTS
DIGITAL NETWORK GAUGE (6Y8) ............................................................6-1
DIGITAL NETWORK GAUGE COMPATIBLE MODEL .................................................6-2
DIGITAL NETWORK GAUGE APPLICATION ..............................................................6-2
DIGITAL NETWORK GAUGE DIMENSIONS ...............................................................6-3
OPTIONAL EQUIPMENTS ...........................................................................................6-5
WIRE HARNESS ..........................................................................................................6-7
NETWORK HUB ...........................................................................................................6-8
IMMOBILIZER UNIT .....................................................................................................6-9
NETWORK WIRING DIAGRAMS ...............................................................................6-10
INITIAL GAUGE SETUP .............................................................................................6-19
TROUBLESHOOTING ................................................................................................6-20
BASIC REQUIREMENTS ...........................................................................................6-21
NMEA0183 COMPATIBLE EQUIPMENTS CONNECTION........................................6-21

DIGITAL NETWORK PREMIUM GAUGE (6Y9) ..........................................7-1

DIGITAL NETWORK PREMIUM GAUGE COMPATIBLE MODEL ...............................7-3
DIGITAL NETWORK PREMIUM GAUGE APPLICATION ............................................7-3
DIGITAL NETWORK PREMIUM GAUGE DIMENSIONS .............................................7-4
OPTIONAL EQUIPMENTS ...........................................................................................7-5
NETWORK HUB ...........................................................................................................7-8
WIRE-HARNESS ..........................................................................................................7-9
NETWORK WIRING DIAGRAMS ...............................................................................7-14

BATTERY .....................................................................................................8-1
RECOMMENDED BATTERY........................................................................................8-2
BATTERY CABLE LENGTH .........................................................................................8-3
BATTERY WIRING .......................................................................................................8-4

APPENDIX....................................................................................................9-1
MODEL NAME DESIGNATION ....................................................................................9-3
FUEL SYSTEM VACUUM PRESSURE STANDARD ...................................................9-5
PORTABLE FUEL TANKS (TYPICAL) .........................................................................9-7
FUEL PIPES (TYPICAL) ...............................................................................................9-8
PRIMARY PUMP (TYPICAL) ........................................................................................9-8
PRE-DELIVERY INSPECTION (PDI) CHECKS ...........................................................9-9
CONVENTIONAL RIGGING KIT CONTENTS ............................................................9-10
DIGITAL NETWORK GAUGE RIGGING KIT CONTENTS .........................................9-13
IMMOBILIZER RIGGING KIT CONTENTS .................................................................9-27
DIGITAL NETWORK PREMIUM GAUGE RIGGING KIT CONTENTS .......................9-29
OTHER RIGGING KIT CONTENTS............................................................................9-32
2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER .......................9-33

INSTALLATION

TOP COVER PICTOGRAPH DESCRIPTION........................................... 1-2

ENGINE OIL REMINDER LABEL (4-STROKE ENGINE) ........................ 1-2
UNCRATING PROCEDURE (FOR TYPICAL STEEL FRAME) ............... 1-3
MOUNTING THE OUTBOARD MOTOR .................................................. 1-5
WATER LEVEL GUIDELINE (4-STROKE ENGINES).......................... 1-9
ADJUSTING TWIN MOTORS ............................................................ 1-10
MAX. BOAT SPEED ESTIMATION .................................................... 1-10
MOUNTING THE REMOTE OIL TANK .................................................. 1-11
REMOTE OIL TANK DIMENSIONS ................................................... 1-11
NOTICE FOR MOUNTING THE REMOTE OIL TANK ....................... 1-11
OUTBOARD MOTOR DIMENSIONS ..................................................... 1-12
OVERALL DIMENSION ITEMS.......................................................... 1-12
OVERALL DIMENSIONS (2-STROKE) .............................................. 1-14
OVERALL DIMENSIONS (4-STROKE) .............................................. 1-21
CLAMP BRACKET DIMENSION ITEMS ............................................ 1-28
CLAMP BRACKET DIMENSIONS...................................................... 1-29

1-1

TOP COVER PICTOGRAPH DESCRIPTION

The following pictographs are important sign to handle the crate.
Read the notice and understand what pictographs mean to avoid a damage to the product when
handling, transporting and/or keeping the crate.
* Photo shows F300 (V8)/F350.

Stack limit: Max. 4 units for storage

Upward indication
Lifting fork insert position

Care handling indication

Water avoidance indication

Product barycentric position

ENGINE OIL REMINDER LABEL (4-STROKE ENGINE)

This temporary label is attached to the top cowl to notice the engine oil quantity after uncrated.
Therefore, remove the label immediately after the engine oil has been filled to the specific quantity.
* If the label has been exposed to the sun-ray for long hours, it may become difficult to remove.
Remove label after checking oil

1-2

UNCRATING PROCEDURE
(FOR TYPICAL STEEL FRAME)

4. Remove the bottom bolts (3).

WARNING
Wear gloves to avoid injury by sharp steel
edges while uncrating.
This is an example of the steel crate for V6
models.
For other steel crate models, refer to this procedure for uncrating the steel frame.

(3)

1. Inspect the crate for shipping damage. If a

damage has been found, consult your Yamaha dealer.

5. Lift the top frame (4) straight up.

(4)

2. Cut the two straps (1).

(1)

6. Remove the wrapping (5), and inspect the

outboard motor for concealed damage. If
any damage is found, consult your Yamaha
dealer.

3. Lift the top cover (2) straight up to remove.

(2)

(5)

To be continued.

1-3

UNCRATING PROCEDURE
(FOR TYPICAL STEEL FRAME)

For 4-stroke V8 and V6 (4.2L) engines,

install the lifting attachment (A) to the flywheel using the exclusive 3 bolts (B), insert
the eye bolt (C) to the attachment, attach a
lifting harness (D) to the eye bolt, and
tighten the harness.

7. Remove the top cowling (6).

M10 bolt (B) torque:

36 Nm, 3.6 kgfm, 27 ftlb

(A)

(6)
(D)
8. If the lifting points are covered by the flywheel cover, remove it.

(B)

9. Attach a lifting harness (7) securely to the

lifting points (8), and tighten the harness.

(7)

(8)

Lifting eye kit contents:

Eye bolt (C)

Attachment (A)

M10 bolt (B)

90890-06821 (3 pcs)

To be continued.

1-4

UNCRATING PROCEDURE
(FOR TYPICAL STEEL FRAME)

MOUNTING THE OUTBOARD

MOTOR
WARNING

10. Remove the skeg holder (9) if it is attached.

Overpowering a boat may cause severe

instability. Never install an outboard motor
that exceeds the maximum boat horsepower rating capacity. If a boat does not
have the capacity plate, ask to the boat
manufacturer.
Proper mount of outboard motor will obtain
better engine performance, product reliability,
fuel economy, customer satisfaction, etc.
This chapter describes the brief summary of
outboard motor mount.
For the first requirement, make sure the outboard motor has clearance for full movement,
from port to starboard, as well as during tilt
operation.
For the motor dimensions, see the later pages.

(9)

1. Set an outboard motor on the vertical center

line of boat transom.
Measurement points are shown in the illustration.

11. Carefully lift up the motor with the bottom

crate so that the lifting-harness does not
contact to the engine components.
Have a helper hold the frame to avoid injury
while lifting.

No strakes hull
Make a same radius (R) at both sides of hull,
and have another measurement points.

12. Remove the bracket bolts (10).

C/L

(b)

(a)

(d)

(c)

Strakes hull
Have the measurements between port and
starboard strakes.
C/L

(10)
(a)
(c)

(b)
(d)

*C/L: Centerline of the transom.

To be continued.
1-5

MOUNTING THE OUTBOARD

MOTOR

For triple motors installation, set the motors

as shown below.
If a boat has V-hull, the center motor should
use longer transom motor than outside motors.

Recheck the measurements, and verify the

boat transom vertical centerline is straight.
Measurements (a) and (b) should be the
same, and measurement (c) and (d) should be
the same.

C/L

If mounting twin motors, set the motors so

that the distance between the boat transom
center line and the motor center line should be
equal for the both motors.
C/L
(e)
(f)
(T1)

(T1)

For quad motors installation, set the motors

as shown below.
If a boat has V-hull, inner twin motors should
use longer transom motor than outside motors.
(T1)

C/L

Measurements (e) and (f) should be the same.

Maintain a minimum distance (T1) that is the
measurement between both vertical centerlines of outboard motor.
Minimum distance (T1) is recommended on
each model, and its data is put on the dimension item.

(T1)

To be continued.

1-6

MOUNTING THE OUTBOARD

MOTOR

* Due to combination of a boat type and an engine

type, the mount height of outboard motor varies.
Therefore, the complete information is impossible
to describe here.
For further information, see the instruction issued
by boat manufacturer, or ask to the manufacturer.

2. Adjust the height of outboard motor so that

the anti-cavitation plate is positioned to the
boat transom bottom, or lowered within 25
mm (1 in.).
For planing boats, the anti-cavitation plate
should be positioned to the boat transom
bottom or slightly higher.

3. When the outboard motor mount position

has determined, mark the 4 symmetrical
mount hole positions onto the boat transom.
Make the mount holes of 13 mm (0.5 in.)
vertically on the marking points.

13 m
m (0

.5 in

Single motor

0~25 mm (1 in.)

(a)

Twin motors/ Quad motors

* To make the mounting holes easier, use the drilling plate (P/N: 90890-06783 or YB-34465 for US).

C/L

13 mm

(0.5 in

Ex; Drilling plate (90890-06783)

0~25 mm
(1 in.)

(a)

0~25 mm
(1 in.)

Twin motors
Quad motors

(H)
(H)

Triple motors
C/L

C/L
Height position of
anti-cavitation plate

(H): Motor transom height

To be continued.
0~25 mm
(1 in.)

(a)

0~25 mm
0~25 mm (1 in.)
(1 in.)

(a): Anti-cavitation plate

1-7

MOUNTING THE OUTBOARD

MOTOR

For above 115 (V4) and F75, select the transom mount bolt due to the boat transom thickness.

4. Apply a sealant to the mount holes, and secure the motor with supplied mount hardware.
For tightening procedure, first tighten the inside nut, then the double nuts each other.

Boat transom
thickness (T)
55 65 mm
(2.17 2.56 in.)
65 75 mm
(2.56 2.95 in.)

NOTICE

75 95 mm
(2.95 3.74 in.)

Make sure there is no clearance between

boat transom and motor clamp bracket.
Otherwise, the clamp bracket could break.

95 115 mm
(3.74 4.53 in.)

Mount bolt size

Bolt P/N

M12 115 mm

90101-12M03

M12 130 mm

90101-12M05

M12 150 mm
M12 150 mm
[High tension bolt]
M12 170 mm
[High tension bolt]

90101-12M77
90101-12031
90101-12036

* High tension bolt is recommended to F300 (V8)/F350.

* The upper mount bolt is usually installed to

the 2nd hole from top.

For reference:
M8: 18 Nm, 1.8 kgfm, 13 lbft
M10: 36 Nm, 3.6 kgfm, 27 lbft
M12: 52 Nm, 5.2 kgfm, 38 lbft

(a)
(b)
(d)

(c)

(b)

T
(a)

(b)

(c)

(a) Mounting bolt

(b) Small washer
(c) Large washer
(d) Nut
: Sealant

(b)

(d)

* Tighten the mounting bolts/ nuts by suitable torque

due to boat transom structure, material, design,
etc.

1-8

MOUNTING THE OUTBOARD MOTOR

WATER LEVEL GUIDELINE (4-STROKE ENGINES)
If you replaced 2-stroke engine to 4-stroke engine which has the same horse power, a boat tends to
become stern heavy because of heavier engine weight.
As a result, water line will rise and get close to the power head.
This effects a poor engine performance, and water could easily enter into the cylinder(s) and damage the engine.
Therefore, you should consider the water level guideline to install 4-stroke outboard motor.
Under mooring of boat with a maximum boat load, maintain the minimum height (H) shown in the
illustration between the water surface and the clamp bracket seating point.

(H)

Water surface

Minimum height between water surface and bracket seating point

Model
Min. height (H)
Carbureted F2 F60
150 mm
5.9 in
Fuel injected F40 (4-cyl) F70
100 mm
3.9 in
F75 and above
100 mm
3.9 in

1-9

MOUNTING THE OUTBOARD

MOTOR

MAX. BOAT SPEED ESTIMATION

Due to the engine power, boat length and boat
weight, the maximum boat speed can be generally estimated with the calculation formula as
below.

ADJUSTING TWIN MOTORS

Set the engines in the toe-out position, and
measure the distances between the two
engines at the center point of the rear (a) and
front (b) of the lower casing. The difference
between measurement (a) and measurement
(b) should not exceed 25 mm (1 in.).

V = 1.398

L (PS/)0.623

V = Estimated maximum boat speed (km/h)

L = Boat length (m) *water line
PS = Prop shaft output power
= Displacement volume (ton)
For example:
Boat length = 8 m (27 ft) *water line
Engine power = 250 ps
Displacement volume = 3 ton (3000 kg)
Max. boat speed [V] = 1.398
= 62.2 km/h (38.6 mph)

8 (250/3)0.623

(b)

* This should be only used as a reference.

The maximum boat speed varies depending on
hull design, rigging state, passengers position,
engine weight, engine position, etc.
Confirm the actual boat speed by test run.
(a)

* Adjustment: (b) (a) = Within 25 mm (1 in)

For best result, your toe-out distance should

be set so that the twin motors wake meets
approximately 7.5 15 m (25 50 ft) past the
stern of the boat.

7.5 15 m (25 50 ft)

1-10

MOUNTING THE REMOTE OIL

TANK

Oil tank holder

mm (in.)

The remote oil tank is required for 2-stroke V4

and V6 oil injection engines.

250

REMOTE OIL TANK DIMENSIONS

(9.8

200

30 2)
.
(1

170

(6.

2
11 .4)
(4

3
17 .8)
(6

180 (7.1)

0.2

(
6.5

30
(1.2)

.3)
160 (6

.3)
210 (8

mm (in.)

320 (12.6)

.1)
130 (5

10.5 liters (2.8 US gallons) tank

P/N: 6E5-21733-20

(7.9

(1.

0
20

(7.

1.0

(
25

230 (9.1)

NOTICE FOR MOUNTING THE REMOTE

OIL TANK
Follow the notifications below, for the remote
oil tank installation.
Mount the oil tank in as dry as possible location to avoid water entering into the oil tank.
Mount in a location that will allow service to
the filter located on the remote oil tank.
Mount the remote oil tank lower than the
engine oil tank.
If the remote oil tank is mounted higher than
the top of the engine because of a boat type,
an optional check valve (P/N: 6R5-2440800) shown below is required.

18 liters (4.8 US gallons) tank

P/N: 6E5-21733-30
mm (in.)

235 (9.3)

180 (7.1)

508 (20)

Install it on the oil hose between the engine

and remote oil tank to prevent siphoning of
oil to the engine and spillage.
Route the oil hose between the engine and
the remote oil tank without pinching and
kinking.

1-11

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSION ITEMS
Symbol

Definition and Description

Horizontal distance from datum point to rearmost point of power unit

Horizontal distance from datum point to forefront (depend on the model) of power unit

Distance from datum point to farthest point on tiller handle, when the handle is in horizontal position (in use)

Horizontal distance from datum point to rearmost point of the lower case

Minimum distance from transom board or its extension to forefront of the lower case, with motor
fully trimmed down and steered to the full

Horizontal distance from datum point to rearmost point of protrusion when motor is tilted up (overtilt position)

Horizontal distance from datum point to protruded forefront when motor is tilted up (over-tilt position)

Horizontal distance from datum point to lowest point of protrusion when motor is tilted up (over-tilt
position)

Horizontal forward protrusion of lower case from the datum line when PT/T is fully trimmed down

L10

Horizontal distance from datum point to bracket shaft (bolt) center

Vertical distance from datum point to lowest point of motor

Vertical distance from datum point to highest point of power head

Vertical distance from cavitation plate undersurface to propeller shaft

Vertical distance from datum point to cavitation plate undersurface

Vertical distance from datum point to tiller handle tip when the handle is in vertical position

Vertical distance from skeg tip at H1 to the lowest point of lower unit when motor is tilted up (overtilt position)

Vertical distance from datum line to protruded forefront when motor is tilted up (over-tilt position)

Vertical distance from datum line to lowest point of protrusion when motor is tilted up (over-tilt
position)

Vertical distance to the highest point of the motor when it is tilted up (over-tilt position)

H10

Vertical distance from datum point to bracket shaft (bolt) center

H11

Difference in the height of lower unit lowest point comparing the height in the standard position
and with PT/T in the fully trimmed down position.

Leftward protrusion from center line of motor body when looking at the front face

Distance from tiller handle tip to centerline of motor body when looking at the front face

Distance from centerline to left or right edge of motor body, except for levers and handles

Distance from centerline to left or right end of motor body protrusion, except for levers and handles

Distance from centerline to the farthest point on the body when steered to the maximum angle

Distance from centerline to the farthest point on the tiller handle when steered to the maximum
angle

Maximum steering angle each way (symmetrical), from centerline of motor body

Tilt up angle (whole rotating range to over-tilt angle including negative trim angle)

Maximum negative trim angle from the vertical line through the datum point

Centerline-to-centerline minimum distance of the motors in case of twin installation

1-12

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSION ITEMS

L3
L7

L6
L8

H10

H9
H5

L10

H11

1-13

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
2CMH

3AMH

4ACMH
5CMH

5CSMH

6CMH
(6MH)
8CMH
(8MH)

275 (10.8)
122 (4.8)
328 (12.9)
164 (6.5)
34 (1.3)

589 (23.2)

276 (10.9)
142 (5.6)

50 (2.0)
614 (24.2)

302 (11.9)
100 (3.9)
417 (16.4)

462 (18.2)
503 (19.8)

38 (1.5)
12 (0.5)
397 (15.6)
27 (1.0)

151 (5.9)
125 (4.9)
89 (3.5)

360
73

311 (12.2)
107 (4.2)
317 (12.5)
223 (8.8)
16 (0.6)
16 (0.6)

636 (25.0)
760 (29.9)

311 (12.2)
156 (6.1)

68 (2.7)
654 (25.7)
781 (30.7)

343 (13.5)
103 (4.1)
441 (17.4)
568 (22.4)

484 (19.1)
621 (24.4)
717 (28.2)

342 (13.5)
9.0 (0.35)
419 (16.5)
30 (1.2)

108 (4.3)
181 (7.1)
105 (4.1)

360
76

344 (13.5)
145 (5.7)
333 (13.1)
252 (9.9)
16 (0.6)
24 (0.9)

635 (25.0)
758 (29.8)

331 (13.0)
148 (5.8)

68 (2.7)
653 (25.7)
780 (30.7)

358 (14.1)
105 (4.1)
444 (17.5)
571 (22.5)

396 (15.6)
623 (24.5)
719 (28.3)

104 (4.1)
30 (1.2)
459 (18.1)
30 (1.2)

144 (5.7)
178 (7.0)
134 (5.3)

360
76

344 (13.5)
145 (5.7)
333 (13.1)
252 (9.9)
16 (0.6)
24 (0.9)

635 (25.0)
758 (29.8)

331 (13.0)
148 (5.8)

68 (2.7)
653 (25.7)
780 (30.7)

325 (12.8)
105 (4.1)
444 (17.5)
571 (22.5)

396 (15.6)
623 (24.5)
719 (28.3)

104 (4.1)
30 (1.2)
459 (18.1)
30 (1.2)

144 (5.7)
178 (7.0)
134 (5.3)

360
76

363 (14.3)
114 (4.5)
439 (17.3)
359 (14.1)
121 (4.8)
126 (5.0)

126 (5.0)

705 (27.8)
826 (32.5)

887 (34.9)

287 (11.3)
154 (6.1)

65 (2.5)
682 (26.9)
809 (31.9)

872 (34.3)

295 (11.6)
123 (4.8)
436 (17.2)
563 (22.2)

626 (24.6)

462 (18.2)
668 (26.3)
758 (29.8)

803 (31.6)

110 (4.3)
2.0 (0.08)
470 (18.5)
32 (1.3)

150 (5.9)
193 (7.6)
137 (5.4)

283 (11.1)
551 (21.7)
60
81

E8DMH
EK8DMH

9.9FMH
(9.9MH)
15FMH
(15MH)

E9.9DMH
E15DMH
EK9.9DMH
EK15DMH
EK9.9JMH
EK15PMH

346 (13.6)
180 (7.1)
372 (14.6)
268 (10.6)
23 (0.9)
23 (0.9)

23 (0.9)

657 (25.9)
782 (30.8)

827 (32.6)

354 (13.9)
207 (8.1)

45 (1.8)
685 (27.0)
825 (32.5)

875 (34.4)

359 (14.1)
122 (4.8)
442 (17.4)
582 (22.9)

632 (24.9)

415 (16.3)
497 (19.6)
574 (22.6)

601 (23.7)

86 (3.4)
51 (2.0)
465 (18.3)
26 (1.0)

136 (5.4)
192 (7.6)
129 (5.1)
158 (6.2)

360
80

393 (15.5)
180 (7.1)
479 (18.9)
355 (14.0)
78 (3.1)
104 (4.1)

134 (5.3)
718 (28.3)
831 (32.7)

957 (37.7)
314 (12.4)
263 (10.4)

75 (3.0)
705 (27.8)
832 (32.8)

974 (38.3)
335 (13.2)
135 (5.3)
440 (17.3)
567 (22.3)

709 (27.9)
467 (18.4)
572 (22.5)
641 (25.2)

718 (28.3)
138 (5.4)
19 (0.7)
526 (20.7)
34 (1.3)

143 (5.6)
189 (7.4)
143 (5.6)

280 (11.0)
497 (19.6)
45(P)/40(S)
63

405 (15.9)
165 (6.5)
473 (18.6)
357 (14.0)
79 (3.1)
78 (3.1)

78 (3.1)

708 (27.9)

947 (37.3)

334 (13.1)
165 (6.5)

4 (0.2)

14 (0.6)

73 (2.9)
706 (27.8)
833 (32.8)

975 (38.4)

356 (14.0)
34 (1.4)
441 (17.4)
568 (22.4)

710 (28.0)

474 (18.7)
569 (22.4)
638 (25.2)

714 (28.1)

24 (0.9)
555 (21.9)
34 (1.4)

173 (6.8)

185 (7.3)
280 (11.0)
493 (19.4)
40
63
4

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-14

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

20DMH
(20MH)
20DMHO
25NWC
25NMH
(25MH)
25NMHO

E/25BMH
25BWH
25BWC
25XMH
E/30HMH
30HWH
30HWC
EK25BMH
EK25CMH

25BW
30HW

30DMH
30DMHO

30DEO

30DETO

E40GWH
E40GMH
EK40GMH

E/40JMH
E/40JWH
EK40JMH

428 (16.9)
185 (7.3)
508 (20.0)
402 (15.8)
79 (3.1)
106 (4.2)
117 (4.6)
116 (4.6)

739 (29.1)
852 (33.5)
898 (35.4)
931 (36.7)

337 (13.3)
242 (9.5)

78 (3.1)
703 (27.7)
830 (32.7)
881 (34.7)
919 (36.2)

365 (14.4)
144 (5.7)
419 (16.5)
546 (21.5)
597 (23.5)
635 (25.0)

491 (19.3)
586 (23.1)
655 (25.8)
684 (26.9)
704 (27.7)

186 (7.3)
24 (0.9)
584 (23.0)
41 (1.6)

206 (8.1)
152 (6.0)
177 (7.0)
296 (11.7)
528 (20.8)
40
67

429 (16.89)
180 (7.09)
420 (16.5)
385 (15.16)
61 (2.40)
83 (3.27)
83 (3.27)
83 (3.27)

736 (28.98)
854 (33.62)
897 (35.31)
933 (36.73)

405 (15.94)
195 (7.68)

74.2 (2.9)
707 (27.83)
834 (32.83)
881 (34.68)
920 (36.22)

439 (17.28)
144 (5.67)
423 (16.65)
550 (21.65)
597 (23.50)
636 (25.04)

466 (18.3)
621 (24.45)
701 (27.60)
730 (28.74)
754 (29.68)

118 (4.65)
30 (1.18)
596 (23.46)
40 (1.6)

166 (6.54)
233 (9.2)
148 (5.83)
192 (7.56)
302 (11.89)
472 (18.6)
40
68

429 (16.89)
180 (7.09)

385 (15.16)
83 (3.27)

854 (33.62)

405 (15.94)
195 (7.68)

74.2 (2.92)
834 (32.83)

439 (17.28)
144 (5.67)
550 (21.65)

701 (27.60)

118 (4.65)
30 (1.18)
596 (23.46)
40.3 (1.59)

166 (6.54)

148 (5.83)
192 (7.56)
302 (11.89)
217 (8.54)
40
68

465 (18.3)
198 (7.8)
497 (19.6)
496 (19.5)
85 (3.3)
90 (3.5)

752 (29.6)
859 (33.8)

387 (15.2)
228 (9.0)

73 (2.9)
712 (28.0)
833 (32.8)
872 (34.3)

446 (17.6)
148 (5.8)
424 (16.7)
545 (21.5)
584 (23.0)

445 (17.5)
584 (23.0)
648 (25.5)
668 (26.3)

278 (10.9)
29 (1.1)
657 (25.9)
44 (1.7)

208 (8.2)
152 (6.0)
179 (7.0)
310 (12.2)
522 (20.6)
40
70

465 (18.3)
114 (4.5)

496 (19.5)
85 (3.3)
90 (3.5)
99 (3.9)

752 (29.6)
859 (33.8)
895 (35.2)

375 (14.8)
173 (6.8)

73 (2.9)
712 (28.0)
833 (32.8)
874 (34.4)

428 (16.9)
148 (5.8)
424 (16.7)
545 (21.5)
586 (23.1)

584 (23.0)
648 (25.5)
670 (26.4)

224 (8.8)
9.0 (0.35)
647 (25.5)
44 (1.7)

154 (6.1)

310 (12.2)

40
70

489 (19.25)
89 (3.5)

520 (20.5)

103 (4.1)

870 (34.2)

356 (14.0)
158 (6.2)

65 (2.6)

835 (32.9)

426 (16.8)
148 (5.8)

547 (21.5)

651 (25.6)

244 (9.6)
8.7 (0.3)
661 (26.0)
42 (16.5)

22 (0.87)

154 (6.1)
152 (6.0)

310 (12.2)

40
61
4

504 (19.8)
188 (7.4)
493 (19.4)
421 (16.6)
94 (3.7)
94 (3.7)
94 (3.7)

784 (30.9)
897 (35.3)
943 (37.1)

427 (16.8)
193 (7.6)

72 (2.8)
771 (30.4)
898 (35.4)
948 (37.3)

444 (17.5)
162 (6.4)
444 (17.5)
570 (22.4)
622 (24.5)

533 (21.0)
622 (24.5)
691 (27.2)
719 (28.3)

127 (5.0)
30 (1.2)
695 (27.4)
45 (1.8)

190 (7.5)
294 (11.6)
173 (6.8)
205 (8.1)
360 (14.2)
602 (23.7)
45
67

504 (19.8)
188 (7.4)
493 (19.4)
421 (16.6)
94 (3.7)
94 (3.7)
94 (3.7)

784 (30.9)
897 (35.3)
943 (37.1)

427 (16.8)
193 (7.6)

72 (2.8)
771 (30.4)
898 (35.4)
948 (37.3)

444 (17.5)
162 (6.4)
444 (17.5)
570 (22.4)
622 (24.5)

533 (21.0)
622 (24.5)
691 (27.2)
719 (28.3)

127 (5.0)
30 (1.2)
695 (27.4)
45 (1.8)

190 (7.5)
294 (11.6)
173 (6.8)
205 (8.1)
360 (14.2)
602 (23.7)
45
67

1-15

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
E40JW

E/40XMH
E/40XWH

E/40XW

E/40XWT

40VMHO
50HMHO

40VEO

40VETO
50HET
50HETO
(50TR)

504 (19.8)
188 (7.4)

478 (18.8)
94 (3.7)

797 (31.4)
910 (35.8)

427 (16.8)
193 (7.6)

72 (2.8)
764 (30.1)

444 (17.5)
175 (6.9)
421 (16.6)

533 (21.0)
614 (24.2)

127 (5.0)
30 (1.2)
695 (27.4)
45 (1.8)

190 (7.5)

173 (6.8)
205 (8.1)
360 (14.2)
602 (23.7)
45
67

533 (21.8)
118 (4.6)
523 (20.6)
522 (20.6)
65 (2.6)
91 (3.6)
91 (3.6)

826 (32.5)
940 (37.0)
1,043 (41.1)

397 (15.6)
294 (11.6)
3 (0.1)
8 (0.3)
16 (0.6)

65 (2.6)
767 (30.2)
893 (35.2)
1,007 (39.6)

471 (18.5)
175 (6.9)
424 (16.7)
550 (21.7)
649 (25.6)

626 (24.6)
697 (27.4)
753 (29.6)

159 (6.3)
38 (1.5)
702 (27.6)
43 (1.69)
25 (0.98)
24 (0.94)

182 (7.2)
220.5 (8.7)
182 (7.2)

369 (14.5)
592 (23.3)
42
64

553 (21.8)
118 (4.6)

522 (20.6)
65 (2.6)
91 (3.6)

826 (32.5)
940 (37.0)

397 (15.6)

3 (0.1)
8 (0.3)

65 (2.6)
767 (30.2)
893 (35.2)

471 (18.5)
175 (6.9)
424 (16.7)
550 (21.7)

626 (24.6)
697 (27.4)

159 (6.3)

702 (27.6)
43 (1.69)
25 (0.98)
24 (0.94)

182 (7.2)

369 (14.5)

42
64

533 (21.8)
118 (4.6)

522 (20.6)
91 (3.6)

935 (36.8)

1,020 (40.2)

391 (15.4)

8 (0.3)

16 (0.6)

65 (2.6)

893 (35.2)

1,007 (39.6)

471 (18.5)
175 (6.9)

550 (21.7)

649 (25.6)

532 (20.9)

637 (25.1)

709 (27.9)

176 (6.9)

706 (27.8)
43 (1.69)

24 (0.94)

55 (2.2)

182 (7.2)

369 (14.5)

42
61
4

490 (19.3)
257 (10.1)
789 (31.1)
493 (19.4)

798 (31.4)
910 (35.8)

433 (17.0)
273 (10.7)

72 (2.8)
751 (29.6)
878 (34.6)

472 (18.6)
175 (6.9)
408 (16.1)
535 (21.1)

731 (28.8)
579 (22.8)
646 (25.4)

201 (7.9)
55 (2.2)
683 (26.9)
44 (1.7)

124 (4.9)
175 (6.9)

340 (13.4)
641 (25.2)
40
62

490 (19.3)
178 (7.0)

493 (19.4)

798 (31.4)
910 (35.8)

401 (15.8)
179 (7.0)

72 (2.8)
751 (29.6)
878 (34.6)

441 (17.4)
175 (6.9)
408 (16.1)
535 (21.1)

579 (22.8)
646 (25.4)

217 (8.5)
17 (0.7)
671 (26.4)
44 (1.7)

180 (7.1)

175 (6.9)
180 (7.1)
340 (13.4)

40
62

528 (20.8)
142 (5.6)

529 (20.8)
78 (3.1)
77 (3.0)

77 (3.0)

822 (32.4)
937 (36.9)

1,040 (40.9)

387 (15.2)
153 (6.0)
11 (0.43)
10 (0.4)

63 (2.5)
753 (29.6)
880 (34.6)

994 (39.1)

439 (17.3)
175 (6.9)
410 (16.1)
537 (21.1)

651 (25.6)

635 (25.0)
709 (27.9)

775 (30.5)

222 (8.7)
0.0 (0.00)
688 (27.1)
44 (1.7)
20 (0.8)
19 (0.7)

180 (7.1)

175 (6.9)
180 (7.1)
340 (13.4)

40
65
4

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-16

40VMHD
40VWHDO
40VWHTO
50HMHD
50HWHD
50HWHTO

528 (20.8)
221 (8.7)
753 (29.6)
529 (20.8)

77 (3.0)

937 (36.9)

418 (16.5)
246 (9.7)

10 (0.4)

63 (2.5)

880 (34.6)

470 (18.5)
175 (6.9)

537 (21.1)

728 (28.7)

709 (27.9)

204 (8.0)
43 (1.7)
696 (27.4)
44 (1.7)

19 (0.7)

180 (7.1)
124 (4.9)
175 (6.9)
180 (7.1)
340 (13.4)
641 (25.2)
40
65
4

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
E48CMH
E55CMH

55BED
S-transom

55BED
L-transom

55BET

55DEHD

E60HMHD
E60HWHD

E60HWD

60FED
60FEDO
S-transom

487 (19.2)
298 (11.7)
680 (26.8)
487 (19.2)
54 (2.1)
71 (2.8)

827 (32.6)
932 (36.7)

437 (17.2)
280 (11.0)

77 (3.0)
809 (31.9)
931 (36.7)

449 (17.7)
191 (7.5)
451 (17.8)
572 (22.5)

568 (22.4)
591 (23.3)
652 (25.7)

171 (6.7)
93 (3.7)
684 (26.9)
42 (1.7)
22 (0.9)
21 (0.8)

159 (6.3)
165 (6.5)

268 (10.6)
507 (20.0)
30
64

531 (20.9)
159 (6.3)

531 (20.9)
87 (3.4)

818 (32.2)

392 (15.4)
154 (6.1)

67 (2.6)
758 (29.8)

424 (16.7)
191 (7.5)
399 (15.7)

636 (25.0)

158 (6.2)
12 (0.5)
695 (27.4)
47 (1.9)
24 (0.9)

166 (6.5)

271 (10.7)

30
68

516 (20.3)
174 (6.9)

516 (20.3)

90 (3.5)

919 (36.2)

400 (15.7)
164 (6.5)

67 (2.6)

879 (34.6)

424 (16.7)
191 (7.5)

520 (20.5)

689 (27.1)

147 (5.8)
25 (1.0)
682 (26.9)
47 (1.9)
24 (0.9)

166 (6.5)

271 (10.7)

30
68

516 (20.3)
174 (6.9)

516 (20.3)

90 (3.5)

79 (3.1)

919 (36.2)

1,033 (40.7)

400 (15.7)
164 (6.5)

14 (0.6)

67 (2.6)

879 (34.6)

1,006 (39.6)

424 (16.7)
191 (7.5)

520 (20.5)

647 (25.5)

689 (27.1)

760 (29.9)

147 (5.8)
25 (1.0)
682 (26.9)
47 (1.9)
24 (0.9)

166 (6.5)

271 (10.7)

30
68
4

545 (21.5)
180 (7.1)
790 (31.1)
547 (21.5)

88 (3.5)

85 (3.3)

968 (38.1)

1,080 (42.5)

164 (6.5)

67 (2.6)

901 (35.5)

1,028 (40.5)

520 (20.5)
191 (7.5)

520 (20.5)

647 (25.5)

698 (27.5)

764 (30.1)

23 (0.9)
743 (29.3)
47 (1.9)

211 (8.3)

187 (7.4)

331 (13.0)

30
67

532 (20.9)
269 (10.6)
651 (25.6)
546 (21.5)
97 (3.8)
99 (3.9)

913 (35.9)
1,020 (40.2)

457 (18.0)
256 (10.1)

67 (2.6)
831 (32.7)
954 (37.6)

528 (20.8)
191 (7.5)
450 (17.7)
538 (21.2)

753 (29.6)
670 (26.4)
722 (28.4)

216 (8.5)
81 (3.2)
722 (28.4)
46 (1.8)
27 (1.1)
27 (1.1)

159 (6.3)
182 (7.2)

322 (12.7)
553 (21.8)
35
67
2.8

532 (20.9)
269 (10.6)
651 (25.6)
546 (21.5)

99 (3.9)

1,020 (40.2)

457 (18.0)
256 (10.1)

67 (2.6)

954 (37.6)

528 (20.8)
191 (7.5)

538 (21.2)

753 (29.6)

722 (28.4)

216 (8.5)
81 (3.2)
722 (28.4)
46 (1.8)

27 (1.1)

182 (7.2)

322 (12.7)

35
67
2.8

547 (21.5)
151 (5.9)

562 (22.1)
113 (4.4)

868 (34.2)

403 (15.9)
206 (8.1)

67 (2.6)
780 (30.7)

472 (18.6)
191 (7.5)
400 (15.7)

645 (25.4)

262 (10.3)
24 (0.94)
719 (28.3)
47 (1.9)

182 (7.2)

321 (12.6)

35
63
0

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-17

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
60FED
60FEDO
L-transom

60FETO
70BETO
S-transom

60FET
60FETO
70BETO
L/X-transom

70BEHTO

55DEHD
75AEHD
85AEHD

75AED
85AED

75AET
85AET

E60JMHD
E65AMHD
E75BMHD

532 (20.9)
166 (6.5)

547 (21.5)

91 (3.6)

968 (38.1)

411 (16.2)
214 (8.4)

67 (2.6)

901 (35.5)

472 (18.6)
191 (7.5)

520 (20.5)

696 (27.4)

249 (9.8)
11 (0.43)
706 (27.8)
47 (1.9)

182 (7.2)

321 (12.6)

35
67
4

547 (21.5)
151 (5.9)

562 (22.1)
113 (4.4)

868 (34.2)

403 (15.9)
206 (8.1)
0.0 (0.00)

67 (2.6)
780 (30.7)

472 (18.6)
191 (7.5)
400 (15.7)

645 (25.4)

262 (10.3)
24 (0.94)
719 (28.3)
47 (1.9)
0.0 (0.00)

182 (7.2)

321 (12.6)

35
63
0

532 (20.9)
166 (6.5)

547 (21.5)

91 (3.6)

80 (3.1)

968 (38.1)

1,081 (42.6)

411 (16.2)
214 (8.4)

14 (0.6)

31 (1.2)

67 (2.6)

901 (35.5)

1,028 (40.5)

472 (18.6)
191 (7.5)

520 (20.5)

648 (25.5)

696 (27.4)

764 (30.1)

249 (9.8)
11 (0.43)
706 (27.8)
47 (1.9)

28 (1.1)

27 (1.1)

182 (7.2)

321 (12.6)

35
67
4

532 (20.9)
267 (10.5)
798 (31.4)
547 (21.5)

91 (3.6)

80 (3.1)

968 (38.1)

1,081 (42.6)

411 (16.2)
271 (10.7)

14 (0.6)

31 (1.2)

67 (2.6)

901 (35.5)

1,028 (40.5)

472 (18.6)
191 (7.5)

520 (20.5)

648 (25.5)

706 (27.8)

696 (27.4)

764 (30.1)

249 (9.8)
70 (2.8)
731 (28.8)
47 (1.9)

27 (1.1)

94 (3.7)
181 (7.1)
179 (7.0)
321 (12.6)
583 (23.0)
35
62
4

545 (21.5)
180 (7.1)
790 (31.1)
547 (21.5)

88 (3.5)
85 (3.3)
85 (3.3)

968 (38.1)
1,015 (40.0)
1,080 (42.5)

459 (18.1)
164 (6.5)

67 (2.6)

901 (35.5)
952 (37.5)
1,028 (40.5)

520 (20.5)
191 (7.5)

520 (20.5)
571 (22.5)
647 (25.5)

698 (27.5)
729 (28.7)
764 (30.1)

199 (7.8)
23 (0.9)
743 (29.3)
47 (1.9)

211 (8.3)

187 (7.4)

331 (13.0)

30
67

600 (23.6)

545 (21.5)
180 (7.1)

547 (21.5)

88 (3.5)

80 (3.1)

968 (38.1)

1,080 (42.5)

459 (18.1)
164 (6.5)

67 (2.6)

901 (35.5)

1,028 (40.5)

520 (20.5)
191 (7.5)

520 (20.5)

647 (25.5)

698 (27.5)

764 (30.1)

199 (7.8)
23 (0.9)
743 (29.3)
47 (1.9)

187 (7.4)

331 (13.0)

30
67

600 (23.6)

545 (21.5)
180 (7.1)

547 (21.5)

88 (3.5)

80 (3.1)

968 (38.1)

1,080 (42.5)

459 (18.1)
164 (6.5)

14 (0.6)

23 (0.9)

67 (2.6)

901 (35.5)

1,028 (40.5)

520 (20.5)
191 (7.5)

520 (20.5)

647 (25.5)

698 (27.5)

764 (30.1)

199 (7.8)
23 (0.9)
743 (29.3)
47 (1.9)

27 (1.1)

187 (7.4)

331 (13.0)

30
67
4
600 (23.6)

545 (21.5)
270 (10.6)
652 (25.7)
547 (21.5)

81 (3.2)
80 (3.1)
70 (2.8)

966 (38.0)
1,011 (39.8)
1,078 (42.4)

542 (21.3)
256 (10.1)

68 (2.7)

902 (35.5)
953 (37.5)
1,029 (40.5)

590 (23.2)
191 (7.5)

521 (20.5)
572 (22.5)
648 (25.5)

555 (21.9)

698 (27.5)
725 (28.5)
766 (30.2)

253 (10.0)
84 (3.3)
778 (30.6)
46 (1.8)

159 (6.3)
187 (7.4)

331 (13.0)
506 (19.9)
30
67

600 (23.6)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-18

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
75CETO
90AETO
(90TR)

E115AMH
E115AWH

E115AE
115BE

E115AET
115BET
140BET

115CETO

130BETO

L/150AET
L/200AET

150FETO
L/200FETO
225DET

545 (21.5)
180 (7.1)

547 (21.5)

88 (3.5)

80 (3.1)

968 (38.1)

1,080 (42.5)

457 (18.0)
164 (6.5)

14 (0.6)

31 (1.2)

67 (2.6)

901 (35.5)

1,028 (40.5)

512 (20.2)
191 (7.5)

520 (20.5)

647 (25.5)

698 (27.5)

764 (30.1)

226 (8.9)
23 (0.9)
730 (28.7)
47 (1.9)

27 (1.1)

187 (7.4)

331 (13.0)

30
67
4
600 (23.6)

539 (21.2)
325 (12.8)
845 (33.3)
616 (24.3)

80 (3.1)
75 (3.0)
85 (3.3)

1,005 (39.6)
1,055 (41.5)
1,120 (44.1)

570 (22.4)
270 (10.6)

64 (2.5)

929 (36.6)
982 (38.7)
1,056 (41.6)

631 (24.8)
190 (7.5)

515 (20.3)
568 (22.4)
642 (25.3)

695 (27.4)

735 (28.9)
765 (30.1)
810 (31.9)

150 (5.9)
155 (6.1)
780 (30.7)
45 (1.8)

300 (11.8)
210 (8.3)
300 (11.8)
300 (11.8)
424 (16.7)
705 (27.8)
35
66

660 (26.0)

539 (21.2)
213 (8.4)

616 (24.3)

80 (3.1)

85 (3.3)

1,005 (39.6)

1,120 (44.1)

482 (19.0)
214 (8.4)

64 (2.5)

929 (36.6)

1,056 (41.6)

508 (20.0)
190 (7.5)

515 (20.3)

642 (25.3)

735 (28.9)

810 (31.9)

150 (5.9)
53 (2.1)
730 (28.7)
45 (1.8)

297 (11.7)

422 (16.6)

35
66

660 (26.0)

539 (21.2)
213 (8.4)

616 (24.3)

80 (3.1)

85 (3.3)

1,005 (39.6)

1,120 (44.1)

482 (19.0)
215 (8.5)

12 (0.5)

64 (2.5)

929 (36.6)

1,056 (41.6)

508 (20.0)
190 (7.5)

515 (20.3)

642 (25.3)

735 (28.9)

810 (31.9)

150 (5.9)
55 (2.2)
730 (28.7)
45 (1.8)

300 (11.8)

424 (16.7)

35
70
4
660 (26.0)

542 (21.3)
188 (7.4)

616 (24.3)

70 (2.8)

61 (2.4)

1,007 (39.6)

1,124 (44.3)

468 (18.4)
173 (6.8)

44 (1.7)

53 (2.1)

74 (2.9)

928 (36.5)

1,054 (41.5)

544 (21.4)
191 (7.5)

515 (20.3)

642 (25.3)

764 (30.1)

839 (33.0)

180 (7.1)
26 (1.0)
730 (28.7)
45 (1.8)

30 (1.2)

291 (11.5)

409 (16.1)

35
70
4
660 (26.0)

554 (21.8)
176 (6.9)

632 (24.9)

70 (2.8)

61 (2.4)

1,007 (39.6)

1,124 (44.3)

463 (18.2)
159 (6.3)

31 (1.2)

40 (1.6)

74 (2.9)

928 (36.5)

1,054 (41.5)

544 (21.4)
191 (7.5)

515 (20.3)

642 (25.3)

764 (30.1)

839 (33.0)

191 (7.5)
15 (0.6)
741 (29.2)
46 (1.8)

30 (1.2)

291 (11.5)

409 (16.1)

35
70
4
660 (26.0)

543 (21.4)
188 (7.4)

634 (25.0)

49 (1.9)

62 (2.4)

1,030 (40.6)

1,144 (45.0)

569 (22.4)
173 (6.8)

54 (2.1)

62 (2.4)

74 (2.9)

946 (37.2)

1,072 (42.2)

631 (24.8)
210 (8.3)

516 (20.3)

642 (25.3)

762 (30.0)

837 (33.0)

205 (8.1)
26 (1.0)
788 (31.0)
45.4 (1.8)

31 (1.2)

301 (11.9)

426 (16.8)

35
70
4
660 (26.0)

550 (21.7)
179 (17.0)

647 (25.5)

61 (2.4)

80 (3.1)

1,036 (40.8)

1,152 (45.4)

587 (23.1)
159 (6.3)

41 (1.6)

50 (2.1)

74 (2.9)

946 (37.2)

1,072 (42.2)

670 (26.4)
210 (8.3)

516 (20.3)

642 (25.3)

773 (30.4)

849 (33.4)

241 (9.5)
15 (0.6)
791 (31.1)
46 (1.8)

33 (1.3)

290 (11.4)

406 (16.0)

35
70
4
660 (26.0)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-19

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (2-STROKE)
Global model
(US, CA model)
200GETO

Z150PETO
Z175GETO
(Z175TR)
Z/LZ200NETO
(Z/LZ200TR)

Z150QETO
(VZ150TR)
Z175HETO
(VZ175TR)
Z200PETO

L/250GETO

557 (21.9)
179 (7.0)

647 (25.5)

61 (2.4)

1,036 (40.8)

587 (23.1)
159 (6.3)

41 (1.6)

74 (2.9)

946 (37.2)

691 (27.2)
210 (8.3)

516 (20.3)

773 (30.4)

241 (9.5)
15 (0.6)
864 (34.0)
46 (1.8)

33 (1.3)

290 (11.4)

406 (16.0)

35
70
4

613 (24.1)
180 (7.1)

646 (25.4)

53 (2.1)

69 (2.7)

1,034 (40.7)

1,150 (45.3)

574 (22.6)
168 (6.6)

42 (1.7)

50 (2.0)

74 (2.9)

947 (37.3)

1,074 (42.3)

708 (27.9)
211 (8.3)

516 (20.3)

643 (25.3)

774 (30.5)

850 (33.5)

308 (12.1)
14 (0.6)
835 (32.9)
44 (1.7)

32 (1.3)

277 (10.9)

396 (15.6)

32
70
4
660 (26.0)

613 (24.1)
180 (7.1)

646 (25.4)

53 (2.1)

1,034 (40.7)

574 (22.6)
168 (6.6)

42 (1.7)

74 (2.9)

947 (37.3)

746 (27.9)
211 (8.3)

516 (20.3)

774 (30.5)

308 (12.1)
14 (0.6)
945 (37.2)
44 (1.7)

32 (1.3)

277 (10.9)

396 (15.6)

32
70
4

566 (22.3)
181 (7.1)

673 (26.5)

69 (2.7)
89 (3.5)

1,155 (45.5)
1,271 (50.0)
631 (24.8)
185 (7.3)

52 (2.0)
58 (2.3)
74 (2.9)

1,077 (42.4)
1,203 (47.4)
710 (28.0)
216 (8.5)

642 (25.3)
768 (30.2)

846 (33.3)
923 (36.3)
242 (9.5)
21 (0.8)
818 (32.2)
45 (1.8)

25 (1.0)
25 (1.0)
281 (11.1)

420 (16.5)

32
70
3
660 (26.0)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-20

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
F2AMH
F2.5AMH
(F2.5MH)

F4BMH
(F4MHA)
F5AMH
F6CMH
(F6MHA)

F8CMH
(F8MHA)
Long handle

F8CMH
F8CWH
Short handle

FT8DMH
(T8MHA)
FT8DWH
(T8EHA)
Long handle

FT8DE
(T8EA)

FT8DEHP
(T8PHA)

FT8DEP
(T8PA)

315 (12.4)
93 (3.7)
309 (12.2)
215 (8.5)
57 (2.2)
57 (2.2)

636 (25.0)
761 (30.0)

366 (14.4)
167 (6.6)

75 (3.0)
645 (25.4)
772 (30.4)

376 (14.8)
103 (4.1)
432 (17.0)
559 (22.0)

470 (18.5)
642 (25.3)
746 (29.4)

264 (10.4)
15 (0.6)
406 (16.0)
32 (1.3)

140 (5.5)
205 (8.1)
139 (5.5)
135 (5.3)

360
80

409 (16.1)
130 (5.1)
341 (13.4)
259 (10.2)
71 (2.8)
93 (3.7)

635 (25.0)
753 (29.6)

383 (15.1)
134 (5.3)

63 (2.5)
644 (25.4)
771 (30.4)

395 (15.6)
104 (4.1)
435 (17.1)
562 (22.1)

430 (16.9)
555 (21.9)
637 (25.1)

191 (7.5)
1 (0.0)
503 (19.8)
39 (1.5)

181 (7.1)
222 (8.7)

153 (6.0)
325 (12.8)
425 (16.7)
90
69

430 (16.9)
122 (4.8)
608 (23.9)
355 (14.0)
72 (2.8)
99 (3.9)

706 (27.8)
822 (32.4)

271 (10.7)
139 (5.5)

67 (2.6)
682 (26.9)
809 (31.9)

318 (12.5)
123 (4.8)
436 (17.2)
563 (22.2)

673 (26.5)
594 (23.4)
669 (26.3)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

159 (6.3)
199 (7.8)
159 (6.3)
159 (6.3)
286 (11.3)
619 (24.4)
45
66

430 (16.9)
122 (4.8)
498 (19.6)
355 (14.0)
72 (2.8)
99 (3.9)

706 (27.8)
822 (32.4)

271 (10.7)
139 (5.5)

67 (2.6)
682 (26.9)
809 (31.9)

318 (12.5)
123 (4.8)
436 (17.2)
563 (22.2)

563 (22.2)
594 (23.4)
669 (26.3)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

169 (6.7)
206 (8.1)
159 (6.3)
159 (6.3)
286 (11.3)
536 (21.1)
45
66

430 (16.9)
122 (4.8)
608 (23.9)
367 (14.4)

99 (3.9)

879 (34.6)

941 (37.0)

271 (10.7)
139 (5.5)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

673 (26.5)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

172 (6.8)
199 (7.8)
159 (6.3)
159 (6.3)
286 (11.3)
619 (24.4)
45
66

430 (16.9)
122 (4.8)

367 (14.4)

99 (3.9)

879 (34.6)

941 (37.0)

271 (10.7)
139 (5.5)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

177 (7.0)

159 (6.3)
159 (6.3)
286 (11.3)

45
66

430 (16.9)
122 (4.8)
608 (23.9)
367 (14.4)

99 (3.9)

879 (34.6)

941 (37.0)

271 (10.7)
190 (7.5)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

673 (26.5)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

172 (6.8)
199 (7.8)
159 (6.3)
159 (6.3)
326 (12.8)
586 (23.1)
40
66

430 (16.9)
122 (4.8)

367 (14.4)

99 (3.9)

879 (34.6)

941 (37.0)

271 (10.7)
225 (8.9)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

177 (7.0)
135 (5.3)
159 (6.3)
159 (6.3)
271 (10.7)
271 (10.7)
40
66

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-21

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)

F9.9FMH
F9.9FEH
F9.9FWH
Short handle

F9.9FMH
(F9.9MHA)
F9.9FEH
(F9.9EHA)
F9.9FWH
Long handle

F9.9FE
(F9.9EA)

FT9.9GMH
(T9.9MHA)
FT9.9GWH
(T9.9EHA)

FT9.9GEHP
(T9.9PHA)

FT9.9GE
(T9.9EA)

FT9.9GEP
(T9.9PA)

F9.9HMH
F15CMH
(F15MHA)
F15CEH
(F15EHA)
F15CWH
F20BMH
(F20MHA)
F20BEH
(F20EHA)
F20BWH
F20CMH

431 (17.0)
121 (4.8)
497 (19.6)
356 (14.0)
49 (1.9)
67 (2.6)

708 (27.9)
825 (32.5)

274 (10.8)
138 (5.4)
18 (0.7)
27 (1.1)

66 (2.6)
677 (26.7)
804 (31.7)

323 (12.7)
123 (4.8)
431 (17.0)
558 (22.0)

568 (22.4)
604 (23.8)
682 (26.9)

206 (8.1)
8 (0.3)
533 (21.0)
37 (1.5)
19 (0.7)
19 (0.7)

169 (6.7)
206 (8.1)
159 (6.3)
159 (6.3)
279 (11.0)
524 (20.6)
43
71
4

431 (17.0)
121 (4.8)
607 (23.9)
356 (14.0)
49 (1.9)
67 (2.6)

708 (27.9)
825 (32.5)

274 (10.8)
138 (5.4)
18 (0.7)
27 (1.1)

66 (2.6)
677 (26.7)
804 (31.7)

323 (12.7)
123 (4.8)
431 (17.0)
558 (22.0)

679 (26.7)
604 (23.8)
682 (26.9)

206 (8.1)
8 (0.3)
609 (24.0)
37 (1.5)
19 (0.7)
19 (0.7)

159 (6.3)
199 (7.8)
159 (6.3)
159 (6.3)
279 (11.0)
603 (23.7)
43
71
4

431 (17.0)
121 (4.8)

356 (14.0)
49 (1.9)
67 (2.6)

708 (27.9)
825 (32.5)

274 (10.8)
138 (5.4)
18 (0.7)
27 (1.1)

66 (2.6)
677 (26.7)
804 (31.7)

323 (12.7)
123 (4.8)
431 (17.0)
558 (22.0)

604 (23.8)
682 (26.9)

206 (8.1)
8 (0.3)
533 (21.0)
37 (1.5)
19 (0.7)
19 (0.7)

177 (7.0)

159 (6.3)
159 (6.3)
279 (11.0)

43
71
4

431 (17.0)
121 (4.8)
607 (23.9)
367 (14.4)

67 (2.6)

891 (35.1)

954 (37.6)

274 (10.8)
138 (5.4)

27 (1.1)

66 (2.6)

864 (34.0)

932 (36.7)

323 (12.7)
157 (6.2)

552 (21.7)

620 (24.4)

678 (26.7)

730 (28.7)

771 (30.4)

206 (8.1)
8 (0.3)
609 (24.0)
37 (1.5)

19 (0.7)

172 (6.8)
199 (7.8)
159 (6.3)
159 (6.3)
279 (11.0)
603 (23.7)
43
71
4

430 (16.9)
122 (4.8)
608 (23.9)
367 (14.4)

35 (1.4)

879 (34.6)

941 (37.0)

271 (10.7)
139 (5.5)

62 (2.4)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

673 (26.5)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
604 (23.8)
32 (1.3)

33 (1.3)

172 (6.8)
199 (7.8)
159 (6.3)
159
264 (10.4)
567 (22.3)
38
74
8

431 (17.0)
121 (4.8)

367 (14.4)

67 (2.6)

891 (35.1)

954 (37.6)

274 (10.8)
138 (5.4)

27 (1.1)

66 (2.6)

864 (34.0)

932 (36.7)

323 (12.7)
157 (6.2)

552 (21.7)

620 (24.4)

730 (28.7)

771 (30.4)

206 (8.1)
8 (0.3)
533 (21.0)
37 (1.5)

19 (0.7)

177 (7.0)

159 (6.3)
159 (6.3)
279 (11.0)

43
71
4

430 (16.9)
122 (4.8)

367 (14.4)

35 (1.4)

879 (34.6)

941 (37.0)

271 (10.7)
139 (5.5)

62 (2.4)

67 (2.6)

869 (34.2)

937 (36.9)

318 (12.5)
157 (6.2)

557 (21.9)

625 (24.6)

717 (28.2)

757 (29.8)

203 (8.0)
5 (0.2)
529 (20.8)
32 (1.3)

33 (1.3)

177 (7.0)

159 (6.3)
159 (6.3)
264 (10.4)

38
74
8

489 (19.3)
219 (8.6)
559 (22.0)
387 (15.2)
64 (2.5)
82 (3.2)

730 (28.7)
847 (33.3)

381 (15.0)
237 (9.3)
9 (0.4)
18 (0.7)

66 (2.6)
701 (27.6)
828 (32.6)

377 (14.8)
133 (5.2)
438 (17.2)
565 (22.2)

570 (22.4)
616 (24.3)
694 (27.3)

399 (15.7)
44 (1.7)
580 (22.8)
37 (1.5)
19 (0.7)
19 (0.7)

210 (8.3)
210 (8.3)
176 (6.9)

341 (13.4)
598 (23.5)
45
71
4

Global model
(US, CA model)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-22

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
F15CEHP
(F15PHA)
F20BEHP
(F20PHA)

F15CE
F20BE
(F20EA)

F15CEP
F20BEP
(F20PA)

F25DMH
(F25MHA)
F25DEH
(F25EHA)
F25DWH

F25DMHD
F25DEHD
F25DWHD

F25DEHT

F25DEH
6X4 tiller
handle

F25DE
(F25EA)

488 (19.2)
220 (8.7)
559 (22.0)
386 (15.2)

82 (3.2)

840 (33.1)

356 (14.0)
176 (6.9)

18 (0.7)

67 (2.6)

833 (32.8)

372 (14.6)
133 (5.2)

570 (22.4)

566 (22.3)

643 (25.3)

414 (16.3)
37 (1.5)
575 (22.6)
32 (1.3)

19 (0.7)

210 (8.3)
210 (8.3)
176 (6.9)

320 (12.6)
568 (22.4)
40
67
4

489 (19.3)
176 (6.9)

387 (15.2)
64 (2.5)
82 (3.2)

730 (28.7)
847 (33.3)

321 (12.6)
184 (7.2)
9 (0.4)
18 (0.7)

66 (2.6)
701 (27.6)
828 (32.6)

377 (14.8)
133 (5.2)
438 (17.2)
565 (22.2)

616 (24.3)
694 (27.3)

218 (8.6)
32 (1.3)
580 (22.8)
37 (1.5)
19 (0.7)
19 (0.7)

210 (8.3)

180 (7.1)

341 (13.4)

45
71
4

488 (19.2)
176 (6.9)

386 (15.2)
89 (3.5)
82 (3.2)

727 (28.6)
840 (33.1)

309 (12.2)
188 (7.4)

18 (0.7)

67 (2.6)
706 (27.8)
833 (32.8)

372 (14.6)
133 (5.2)
443 (17.4)
570 (22.4)

574 (22.6)
643 (25.3)

230 (9.1)
28 (1.1)
575 (22.6)
32 (1.3)

19 (0.7)

210 (8.3)

180 (7.1)

320 (12.6)

40
S:63 / L:67
S:0 / L:4

601 (23.7)

580 (22.8)
433 (17.0)
85 (3.3)
103 (4.1)

115 (4.5)

761 (30.0)
880 (34.6)

960 (37.8)

378 (14.9)
189 (7.4)
15 (0.6)
6 (0.2)

1 (0.0)

65 (2.6)
707 (27.8)
834 (32.8)

920 (36.2)

450 (17.7)
144 (5.7)
423 (16.7)
550 (21.7)

635 (25.0)

667 (26.3)
748 (29.4)

803 (31.6)

258 (10.2)
41 (1.6)
705 (27.8)
43 (1.7)
23 (0.9)
22 (0.9)

22 (0.9)

199 (7.8)
213 (8.4)

387 (15.2)
604 (23.8)
42
73
4

601 (23.7)

580 (22.8)
433 (17.0)

111 (4.4)

124 (4.9)

875 (34.4)

951 (37.4)

353 (13.9)
197 (7.8)

14 (0.6)

10 (0.4)

65 (2.6)

834 (32.8)

920 (36.2)

450 (17.7)
144 (5.7)

550 (21.7)

636 (25.0)

665 (26.2)

711 (28.0)

282 (11.1)
26 (1.0)
706 (27.8)
43 (1.7)

18 (0.7)

17 (0.7)

199 (7.8)
213 (8.4)

387 (15.2)
604 (23.8)
42
66
3

601 (23.7)

580 (22.8)
433 (17.0)

111 (4.4)

124 (4.9)

875 (34.4)

951 (37.4)

353 (13.9)
197 (7.8)

14 (0.6)

10 (0.4)

65 (2.6)

834 (32.8)

920 (36.2)

450 (17.7)
144 (5.7)

550 (21.7)

636 (25.0)

665 (26.2)

711 (28.0)

282 (11.1)
26 (1.0)
706 (27.8)
43 (1.7)

18 (0.7)

17 (0.7)

199 (7.8)
213 (8.4)

387 (15.2)
604 (23.8)
42
66
3

601 (23.7)
255 (10.0)
769 (30.3)
433 (17.0)

103 (4.1)

880 (34.6)

378 (14.9)
159 (6.3)

6 (0.2)

65 (2.6)

834 (32.8)

450 (17.7)
144 (5.7)

550 (21.7)

766 (30.2)

748 (29.4)

258 (10.2)
47 (1.9)
705 (27.8)
43 (1.7)

22 (0.9)

199 (7.8)
128 (5.0)

387 (15.2)
665 (26.2)
42
73
4

601 (23.7)
123 (4.8)

433 (17.0)

103 (4.1)

880 (34.6)

378 (14.9)
147 (5.8)

6 (0.2)

65 (2.6)

834 (32.8)

450 (17.7)
144 (5.7)

550 (21.7)

748 (29.4)

258 (10.2)
12 (0.5)
705 (27.8)
43 (1.7)

22 (0.9)

199 (7.8)

387 (15.2)

42
73
4

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-23

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
FT25FET
(T25A)

F30BEHT
F40FEHT

F30BEHD
(F30EHA)
F40FEHD
(F40EHA)

F30BET
(F30A)
F40FET
(F40A)

F40FED
(F40EA)

F40DET
F50FET
(F50TR/A)
F60CET
(F60TR/A)

F50FED

F50DET

601 (23.7)
134 (5.3)

522 (20.6)

66 (2.6)

924 (36.4)

1,025 (40.4)

338 (13.3)
158 (6.2)

29 (1.1)

65 (2.6)

879 (34.6)

993 (39.1)

433 (17.0)
175 (6.9)

536 (21.1)

650 (25.6)

667 (26.3)

728 (28.7)

274 (10.8)
14 (0.6)
698 (27.5)
43 (1.7)

19 (0.7)

199 (7.8)

376 (14.8)

40
66
3

583 (23.0)
235 (9.3)
779 (30.7)
522 (20.6)

66 (2.6)

925 (36.4)

345 (13.6)
177 (7.0)

29 (1.1)

65 (2.6)

879 (34.6)

471 (18.5)
175 (6.9)

536 (21.1)

770 (30.3)

667 (26.3)

306 (12.0)
44 (1.7)
695 (27.4)
43 (1.7)

19 (0.7)

192 (7.6)
128 (5.0)

364 (14.3)
654 (25.7)
40
66
3

583 (23.0)
235 (9.3)
779 (30.7)
522 (20.6)
77 (3.0)
66 (2.6)

66 (2.6)

816 (32.1)
923 (36.3)

1,024 (40.3)

342 (13.5)
178 (7.0)

29 (1.1)

65 (2.6)
757 (29.8)
879 (34.6)

993 (39.1)

471 (18.5)
175 (6.9)
414 (16.3)
536 (21.1)

650 (25.6)

770 (30.3)
594 (23.4)
660 (26.0)

720 (28.3)

304 (12.0)
43 (1.7)
695 (27.4)
43 (1.7)

19 (0.7)

192 (7.6)
128 (5.0)

364 (14.3)
654 (25.7)
40
65
3

583 (23.0)
134 (5.3)

522 (20.6)
77 (3.0)
66 (2.6)

66 (2.6)

817 (32.2)
924 (36.4)

1,025 (40.4)

345 (13.6)
158 (6.2)
0 (0.0)
29 (1.1)

29 (1.1)

65 (2.6)
757 (29.8)
879 (34.6)

993 (39.1)

471 (18.5)
175 (6.9)
414 (16.3)
536 (21.1)

650 (25.6)

606 (23.9)
667 (26.3)

728 (28.7)

306 (12.0)
14 (0.6)
695 (27.4)
43 (1.7)
19 (0.7)
19 (0.7)

19 (0.7)

192 (7.6)

364 (14.3)

40
66
3

583 (23.0)
134 (5.3)

522 (20.6)
77 (3.0)
66 (2.6)

816 (32.1)
923 (36.3)

342 (13.5)
158 (6.2)
0 (0.0)
29 (1.1)

65 (2.6)
757 (29.8)
879 (34.6)

471 (18.5)
175 (6.9)
414 (16.3)
536 (21.1)

594 (23.4)
660 (26.0)

304 (12.0)
15 (0.6)
695 (27.4)
43 (1.7)
19 (0.7)
19 (0.7)

192 (7.6)

364 (14.3)

40
65
3

584 (23.0)
122 (4.8)

533 (21.0)

97 (3.8)

121 (4.8)

932 (36.7)

1,036 (40.8)

417 (16.4)
147 (5.8)

0 (0.0)

62 (2.4)

870 (34.2)

984 (38.7)

545 (21.5)
175 (6.9)

527 (20.7)

641 (25.2)

708 (27.9)

774 (30.5)

354 (13.9)
22 (0.9)
759 (29.9)
49 (1.9)

24 (0.9)

192 (7.6)

360 (14.2)

40
63
4
560 (22.0)

584 (23.0)
122 (4.8)

533 (21.0)

97 (3.8)

930 (36.6)

406 (16.0)
148 (5.8)

0 (0.0)

62 (2.4)

870 (34.2)

545 (21.5)
175 (6.9)

527 (20.7)

682 (26.9)

354 (13.9)
25 (1.0)
762 (30.0)
49 (1.9)

24 (0.9)

192 (7.6)

360 (14.2)

40
63
4
560 (22.0)

576 (22.7)
142 (5.6)

532 (20.9)

97 (3.8)

933 (36.7)

407 (16.0)
148 (5.8)

0.6 (0.02)

63 (2.5)

876 (34.5)

519 (20.4)
175 (6.9)

533 (21.0)

711 (28.0)

327 (12.9)
3.5 (0.14)
733 (28.9)
44 (1.7)

24 (0.9)

181 (7.1)

345 (13.6)

40
65
4
560 (22.0)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-24

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
F50FEHD

F50FEHT
(F50THA)
F60CEHT
(F60THA)

FT50GET
(T50TR/A)
FT60DET
(T60TR/A)

FT50CET

FT50GEHT
FT60DEHT

FT50CEHD

FT50CED

FT60DEHD

584 (23.0)
225 (8.9)
788 (31.0)
533 (21.0)

97 (3.8)

930 (36.6)

406
168 (6.6)

0 (0.0)

62 (2.4)

870 (34.2)

545 (21.5)
175 (6.9)

527 (20.7)

790 (31.1)

682 (26.9)

354 (13.9)
33 (1.3)
713 (28.1)
49 (1.9)

24 (0.9)

192 (7.6)
137 (5.4)

360 (14.2)
672 (26.5)
40
63
4

584 (23.0)
225 (8.9)
788 (31.0)
533 (21.0)

97 (3.8)

121 (4.8)

932 (36.7)

1,036 (40.8)

417 (16.4)
165 (6.5)

0 (0.0)

62 (2.4)

870 (34.2)

984 (38.7)

545 (21.5)
175 (6.9)

527 (20.7)

641 (25.2)

790 (31.1)

708 (27.9)

774 (30.5)

354 (13.9)
37 (1.5)
759 (29.9)
49 (1.9)

24 (0.9)

192 (7.6)
137 (5.4)

360 (14.2)
672 (26.5)
40
65
4

584 (23.0)
122 (4.8)

561(22.1)

98 (3.9)

114 (4.5)

996 (39.2)

1,099 (43.3)

417 (16.4)
147 (5.8)

0 (0.0)

62 (2.4)

910 (35.8)

1,024 (40.3)

545 (21.5)
191 (7.5)

530 (20.9)

644 (25.3)

746 (29.4)

812 (40.0)

354 (13.9)
22 (0.9)
759 (29.9)
49 (1.9)

24 (0.9)

192 (7.6)

360 (14.2)

40
65
4
560 (22.0)

576 (22.7)
142 (5.6)

560 (22.1)

98 (3.9)

989 (38.9)

407 (16.0)
148 (5.8)

0.8 (0.03)

63 (2.5)

917 (36.1)

519 (20.4)
194 (7.6)

533 (21.0)

749 (29.5)

327 (12.9)
3.5 (0.14)
733 (28.9)
44 (1.7)

28 (1.1)

181 (7.1)

345 (13.6)

40
65
4
560 (22.0)

584 (23.0)
225 (8.9)
788 (31.0)
561 (22.1)

98 (3.9)

114 (4.5)

996 (39.2)

1,099 (43.3)

417 (16.4)
165 (6.5)

0 (0.0)

62 (2.4)

910 (35.8)

1,024 (40.3)

545 (21.5)
191 (7.5)

530 (20.9)

644 (25.3)

790 (31.1)

746 (29.4)

812 (40.0)

354 (13.9)
37 (1.5)
759 (29.9)
49 (1.9)

24 (0.9)

192 (7.6)
137 (5.4)

360 (14.2)
672 (26.5)
40
65
4

576 (22.7)
272 (10.7)
797 (31.2)
560 (22.1)

98 (3.9)

989 (38.9)

397 (15.6)
189 (7.2)

0.8 (0.03)

63 (2.5)

917 (36.1)

519 (20.4)
194 (7.6)

533 (21.0)

680 (26.8)

723 (28.5)

330 (13.0)
110 (4.3)
738 (29.1)
44 (1.7)

28 (1.1)

181 (7.1)
213 (8.4)
181 (7.13)

345 (13.6)
738 (29.1)
40
63
4
560 (22.0)

576 (22.7)
142 (5.6)

560 (22.1)

98 (3.9)

989 (38.9)

397 (15.6)
149 (5.9)

0.8 (0.03)

63 (2.5)

917 (36.1)

519 (20.4)
194 (7.6)

533 (21.0)

723 (28.5)

330 (13.0)
0.5 (0.02)
738 (29.1)
44 (1.7)

28 (1.1)

181 (7.1)

181 (7.13)

345 (13.6)

40
63
4
560 (22.0)

584 (23.0)
225 (8.9)
788 (31.0)
561 (22.1)

98 (3.9)

995 (39.2)

407 (16.0)
168 (6.6)

0 (0.0)

62 (2.4)

910 (35.8)

545 (21.5)
191 (7.5)

530 (20.9)

790 (31.1)

720 (28.3)

354 (13.9)
34 (1.3)
763 (30.0)
49 (1.9)

24 (0.9)

192 (7.6)
137 (5.4)

360 (14.2)
672 (26.5)
40
67
4

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

1-25

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
F70AET
(F70A)
F40GET

F70AET
(F70A)
w/ 6X4 tiller
handle

F75BET
(F75TR/A)
F80BET
F90BET
(F90TR/A)
F100DET

591 (23.3)
122 (4.8)

582 (22.9)

67 (2.6)

1,000 (39.4)

1,103 (43.4)

421 (16.6)
152 (6.0)

26 (1.0)

62 (2.4)

915 (36.0)

1,029 (40.5)

561 (22.1)
191 (7.5)

534 (21.0)

648 (25.5)

749 (29.5)

815 (32.1)

371 (14.6)
26 (1.0)
741 (29.2)
49 (1.9)

29 (1.1)

193 (7.6)

363 (14.3)

40
65
4
560 (22.0)

591 (23.3)
225 (8.9)
788 (31.0)
582 (22.9)

67 (2.6)

1,000 (39.4)

1,103 (43.4)

421 (16.6)
165 (6.5)

26 (1.0)

62 (2.4)

915 (36.0)

1,029 (40.5)

561 (22.1)
191 (7.5)

534 (21.0)

648 (25.5)

790 (31.1)

749 (29.5)

815 (32.1)

371 (14.6)
37 (1.5)
741 (29.2)
49 (1.9)

29 (1.1)

193 (7.6)
137 (5.4)

363 (14.3)
676 (26.6)
40 (1.6)
65 (2.6)
4 (0.2)

651 (25.6)
171 (6.7)

574 (22.6)

63 (2.5)

998 (39.3)

1,115 (43.9)

527 (20.7)
164 (6.5)

28 (1.1)

62 (2.4)

917 (36.1)

1,044 (41.1)

666 (26.2)
191 (7.5)

536 (21.1)

663 (26.1)

766 (30.2)

842 (33.1)

366 (14.4)
27 (1.1)
857 (33.7)
49 (1.9)

25 (1.0)

24 (0.9)

240 (9.4)

405 (15.9)

35
70
4
660 (26.0)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

F75BET
(F75TR/A)
F80BET
F90BET
(F90TR/A)
F100DET
w/ 6X4 tiller
handle

F75CED
F80CED

F75CEHD
F80CEHD
F100BEHD

F95AET
F100BET

F/FL115AET
(F/LF115A)

651 (25.6)
247 (9.7)
822 (32.4)
574 (22.6)

63 (2.5)

998 (39.3)

1,115 (43.9)

527 (20.7)
108 (4.3)

28 (1.1)

62 (2.4)

917 (36.1)

1,044 (41.1)

666 (26.2)
191 (7.5)

536 (21.1)

663 (26.1)

784 (30.9)

766 (30.2)

842 (33.1)

366 (14.4)
49 (1.9)
857 (33.7)
49 (1.9)

25 (1.0)

24 (0.9)

240 (9.4)
137 (5.4)

405 (15.9)
633 (24.9)
35
70
4
660 (26.0)

664 (26.1)
161 (6.3)

631 (24.8)

79 (3.1)

87 (3.4)

1,005 (39.6)

1,118 (44.0)

504 (19.8)
168 (6.6)

19 (0.7)

15 (0.6)

75 (3.0)

929 (36.6)

1,056 (41.6)

667 (26.3)
191 (7.5)

516 (20.3)

643 (25.3)

709 (27.9)

776 (30.6)

401 (15.8)
4 (0.2)
892 (35.1)
44 (1.7)

17 (0.7)

243 (9.6)

384 (15.1)

30
64
3
660 (26.0)

664 (26.1)
324 (12.8)
844 (33.2)
631 (24.8)

79 (3.1)

87 (3.4)

1,005 (39.6)

1,118 (44.0)

504 (19.8)
208 (8.2)

19 (0.7)

15 (0.6)

75 (3.0)

929 (36.6)

1,056 (41.6)

667 (26.3)
191 (7.5)

516 (20.3)

643 (25.3)

764 (30.1)

709 (27.9)

776 (30.6)

401 (15.8)
93 (3.7)
892 (35.1)
44 (1.7)

17 (0.7)

243 (9.6)
96 (3.8)

384 (15.1)
578 (22.8)
30
64
3

664 (26.1)
161 (6.3)

631 (24.8)

69 (2.7)

76 (3.0)

1,005 (39.6)

1,122 (44.2)

536 (21.9)
158 (6.2)

25 (1.0)

75 (3.0)

929 (36.6)

1,056 (41.6)

666 (26.2)
191 (7.5)

516 (20.3)

643 (25.3)

776 (30.6)

854 (33.6)

388 (15.3)
14 (0.6)
877 (34.5)
44 (1.7)

25 (1.0)

243 (9.6)

384 (15.1)

30
70
4
660 (26.0)

665 (26.2)
161 (6.3)

631 (24.8)

69 (2.7)

89 (3.5)

1,005 (39.6)

1,122 (44.2)

555 (21.9)
158 (6.2)

25 (1.0)

33 (1.3)

75 (3.0)

929 (36.6)

1,056 (41.6)

681 (26.8)
191 (7.5)

516 (20.3)

643 (25.3)

773 (30.4)

850 (33.5)

406 (16.0)
14 (0.6)
879 (34.6)
44 (1.7)

25 (1.0)

249 (9.8)

392 (15.4)

30
70
4
660 (26.0)

1-26

OUTBOARD MOTOR DIMENSIONS

OVERALL DIMENSIONS (4-STROKE)
Global model
(US, CA model)
F/FL150AET
(F/LF150A)
F/FL150BET

F/FL200CET
(F/LF200A)
F/FL225BET
(F/LF225A)
F/FL250AET
(F/LF250TR)
F/FL200BET
F/FL250GET

698 (27.5)
164 (6.5)

646 (25.4)

60 (2.5)

80 (3.2)

1,032 (40.6)

1,148 (45.2)

629 (24.8)
162 (6.4)

35 (1.4)

43 (1.8)

75 (3.0)

946 (37.2)

1,073 (42.2)

769 (31.3)
210 (8.3)

516 (20.3)

643 (25.3)

787 (31.0)

864 (34.0)

455 (18.0)
16 (0.6)
915 (36.2)
45 (1.8)

27 (1.1)

256 (10.1)

433 (17.1)

35
70
4
660 (26)

651 (25.6)
219 (8.6)

673 (26.5)

59 (2.3)
59 (2.3)

1,115 (45.5)
1,272 (50.1)
619 (24.4)
230 (9.1)

52 (2.0)
59 (2.3)
75 (3.0)

1,078 (42.4)
1,205 (47.4)
752 (29.6)
216 (8.5)

643 (25.3)
770 (30.3)

847 (33.3)
924 (36.4)
387 (15.2)
39 (1.5)
902 (35.5)
45 (1.8)

25 (1.0)
25 (1.0)
317 (12.5)

453 (17.8)

32
70
3
724 (28.5)

Symbol

L1
L2
L3
L4
L5

L7
L8
L9

L10
H1

H2
H3
H4

H5
H6

H7
H8
H9
H10
H11

W1
W2
W3
W4
W5
W6
A1
A2
A3
T1

S
L
Y
X
U
S
L
Y
X
U

S
L
Y
X
U

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)

mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
mm (in.)
degree
degree
degree
mm (in.)

F225CET
L-transom

F200DET
(VF200LA)
F225DET
(VF225LA)
F250CET
(VF250LA)
F225GET
F250FET
F275AET
L-transom

F/FL225FET
(F/LF225CA)
F/FL250DET
(F/LF250CA)
F/FL300BET
(F/LF300CA)

F/FL300AET
F/FL350AET
(F/LF350CA)

664 (26.1)
206 (8.1)

685 (27.0)

62 (2.4)

1,043 (41.1)

615 (24.2)
226 (8.9)

18 (0.7)

75 (3.0)

951 (37.4)

754 (29.7)
216 (8.5)

516 (20.3)

779 (30.7)

399 (15.7)
26 (1.0)
915 (36.0)
45 (1.8)

26 (1.0)

318 (12.5)

464 (18.3)

35
67
4

741 (29.2)
218 (8.6)

688 (27.1)

54 (2.1)

1,033 (40.7)

651 (25.6)
237 (9.3)

81 (3.2)

75 (3.0)

932 (36.7)

817 (32.2)
216 (8.5)

493 (19.4)

715 (28.1)

507 (20.0)
33 (1.3)
1,008 (39.7)
45 (1.8)

35 (1.4)

332 (13.1)

496 (19.5)

35
66
4

728 (28.7)
230 (9.1)

673 (26.5)

59 (2.3)
59 (2.3)

1,155 (45.5)
1,272 (50.1)
639 (25.2)
240 (9.4)

53 (2.1)
59 (2.3)
75 (3.0)

1,078 (42.4)
1,205 (47.4)
812 (32.0)
216 (8.5)

643 (25.3)
770 (30.3)

847 (33.3)
924 (36.4)
510 (20.1)
48 (1.9)
951 (37.4)
45 (1.8)

25 (1.0)
25 (1.0)
317 (12.5)

454 (17.9)

32
67
3
724 (28.5)

776 (30.6)
255 (10.0)

732 (28.8)

48 (1.9)
48 (1.9)

1,193 (47.0)
1,310 (51.6)
712 (28.0)
258 (10.2)

56 (2.2)
62 (2.4)
73 (2.9)

1,098 (43.2)
1,225 (48.2)
909 (35.8)
229 (9.0)

637 (25.1)
764 (30.1)

864 (34.0)
941 (37.0)
588 (23.1)
65 (2.6)
1,041 (41.0)
49 (1.9)

26 (1.0)
26 (1.0)
317 (12.5)

476 (18.7)

32
70
3
724 (28.5)

1-27

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSION ITEMS
Symbol

Definition and Description

Horizontal dimension from centerline of motor body to lower bracket mounting hole (slot)

Vertical dimension from transom top to lower bracket mounting hole (slot)

Horizontal dimension from centerline of motor body to the center of upper bracket mounting hole

Vertical dimension from transom top to the center of upper bracket mounting hole

Horizontal dimension from centerline of motor body to the point of largest width on the bracket

Vertical dimension from transom top to lowest point on the bracket

Horizontal dimension from centerline of motor body to the center of lower extra bracket mounting
hole

Vertical dimension from transom top to the center of extra hole at the lower part of bracket

Dimensions between the upper bracket mounting bolts (when holes are at even intervals)

B10

Dimensions between the upper bracket mounting bolts (when holes are not at even intervals)

B11

Horizontal dimensions from centerline of motor body to the clamping bolt center

B12

Vertical dimensions from transom top to the clamping bolt center

B13

Mount flange thickness of clamp bracket

Allowable transom board thickness when clamping screw is driven-in to the least extent

Allowable transom board thickness when clamping screw is driven-in to the full extent

Maximum allowable transom plate thickness for mounting the motor

Diameter of bracket (main) lower mounting hole, or screw

Diameter of bracket (main) mounting hole, or screw (lower mounting hole diameter, or, for slot,
center-to-center distance of both end circles)

Diameter of bracket mounting (sub) hole

Diameter of central bracket mounting extra hole or the screw size

AN1

Vertical dimension from bottom of clamp bracket to the bottom end of anode

AN2

Horizontal dimension from centerline of motor (anode) to the point of largest width of anode

1-28

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

F2A

F2.5A
F2.5
F2.5

C/L
B5

B11

B12

B11

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

69 (2.7)
143.7 (5.7)

Symbol
B8
B9
B10
B11
B12

mm (in.)

56 (2.2)
40 (0.2)

Symbol
C1
C2
C3

1-29

mm (in.)
22 (0.9)
58 (2.3)

Symbol
D1
D2
D3
D4

mm (in.)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

4AC

5CS

F4B
F4A
F4A

F5A

F6C
F6A
F6A

C/L
B5

B5
B11

B12

B11

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

83 (3.3)
136 (5.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)

55 (2.2)
48 (1.9)

Symbol
C1
C2
C3

1-30

mm (in.)
22 (0.9)
58 (2.3)

Symbol
D1
D2
D3
D4

mm (in.)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

C/L
B11

B12

B11

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

75 (3.0)
164.3 (6.5)

Symbol
B8
B9
B10
B11
B12

mm (in.)

56 (2.2)
50 (2.0)

Symbol
C1
C2
C3

1-31

mm (in.)
22 (0.9)
55 (2.2)

Symbol
D1
D2
D3
D4

mm (in.)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

F8C
F8A
F8A

FT8D
T8A

C/L
B5

B12

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
70.5 (2.8)
180.5 (7.1)
95.3 (3.8)
94.5 (3.7)
105.3 (4.2)
189.5 (7.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)

18 (0.7)

48 (1.9)

Symbol
C1
C2
C3

1-32

mm (in.)
32 (1.3)
65 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.3)
8.3 (0.3)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

9.9F

15F

9.9

C/L
B5

B11

B12

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
92.5 (3.6)
103.5 (4.1)
92.5 (3.6)
49 (1.9)
102.5 (4.0)
176 (6.9)

Symbol
B8
B9
B10
B11
B12

mm (in.)

54.5 (2.1)

70.5 (2.8)
69 (2.7)

Symbol
C1
C2
C3

1-33

mm (in.)
30 (1.2)
56 (2.2)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.3)
8.3 (0.3)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
E15D

C/L

B11

EK9.9D

EK15D

EK9.9J

EK15P

B11

B12

E9.9D

Global model
US model
Canada model
Manual tilt

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
92.6 (3.6)
79 (3.1)

106.3 (4.2)
157 (6.2)

Symbol
B8
B9
B10
B11
B12

mm (in.)

107 (4.2)

67.3 (2.6)
50 (2.0)

Symbol
C1
C2
C3

1-34

mm (in.)
30 (1.2)
60 (2.4)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.32)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

F9.9H

F15C
F15A
F15A

F20B
F20A
F20A

F20C

F9.9F
F9.9A
F9.9A

FT9.9G
T9.9A

C/L
B11

B12

B11

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

95.3 (3.8)
76.5 (3.0)
110 (4.3)
187.5 (7.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)

18 (0.71)

70.5 (2.8)
48 (1.9)

Symbol
C1
C2
C3

1-35

mm (in.)
32 (1.3)
67 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.33)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Power tilt

FT8D
T8A

F15C
F15A
F15A

F20B
F20A
F20A

FT9.9G
T9.9A
T9.9A

C/L
B5

B5
B3

B9 B9

B11

C1
B2

B11

B12

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
95.3 (3.8)
275.5 (10.8)
95.3 (3.8)
94.5 (3.7)
111 (4.4)
325.5 (12.8)

Symbol
B8
B9
B10
B11
B12

mm (in.)

18 (0.7)

73.5 (2.9)
69.5 (2.7)

Symbol
C1
C2
C3

1-36

mm (in.)
38 (1.5)
67 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.3)
10 (0.4)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

E/25B

25X

E/30H

EK25B

EK25C

C/L
B11

B12

B11

C1
C2

D1
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
89 (3.5)
140 (5.5)
112.5 (4.4)
96.5 (3.8)
122.5 (4.8)
176 (6.9)

Symbol
B8
B9
B10
B11
B12

mm (in.)

85 (3.3)
51 (2.0)

Symbol
C1
C2
C3

1-37

mm (in.)
35 (1.4)
65 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
8.5 (0.33)
15 (0.59)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

20D

25N

C/L
B5

B11

B12

B11

C1
C2
D1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

97.5 (3.8)
114.5 (4.5)

122.5 (4.8)
175 (6.9)

Symbol
B8
B9
B10
B11
B12

mm (in.)

87.5 (3.4)
84 (3.3)

Symbol
C1
C2
C3

1-38

mm (in.)
25 (1.0)
65 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
8.3 (0.32)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

E/40X

F25D
F25A
F25A

C/L

B12

B11
D1

B11

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

140 (5.5)
32 (1.3)
150 (5.9)
218 (8.6)

Symbol
B8
B9
B10
B11
B12

mm (in.)

50 (2.0)

95.5 (3.8)
57 (2.2)

Symbol
C1
C2
C3

1-39

mm (in.)
37 (1.5)
68 (2.7)

Symbol
D1
D2
D3
D4

mm (in.)
10.5 (0.41)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

E40G

E/40J

EK40G

EK40J

C/L

B4
B11

B11

B12

C1
C2

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)

212 (8.3)
124.5 (4.9)
32 (1.3)
134.5 (5.3)
249 (9.8)

Symbol
B8
B9
B10
B11
B12

mm (in.)

50 (2.0)

93.5 (3.7)
57 (2.2)

Symbol
C1
C2
C3

1-40

mm (in.)
33 (1.3)
60 (2.3)

Symbol
D1
D2
D3
D4

mm (in.)
10.5 (0.41)
27 (1.1)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
PTT & Hydro-tilt

30D

E/40X

F25D
F25A
F25A

FT25F
T25A
T25A

F30B
F30A

F40F
F40A
F40A

F20D

C/L
B5

B9 B9 B9

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
126 (5.0)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
338 (13.3)

Symbol
B8
B9
B10
B11
B12

mm (in.)

18.5 (0.7)

Symbol
C1
C2
C3

1-41

mm (in.)

69 (2.7)

Symbol
D1
D2
D3
D4

mm (in.)
13 (0.5)
55.5 (2.2)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
PTT & Hydro-tilt

F50F
F50
F50A

FT50G
T50
T50A

F60C
F60
F60A

FT60D
T60
T60A

F40D

F70A
F70A
F70A

F40G

C/L
B5

B9 B9 B9

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
126 (5.0)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
350 (13.8)

Symbol
B8
B9
B10
B11
B12

mm (in.)

18.5 (0.7)

Symbol
C1
C2
C3

1-42

mm (in.)

69 (2.7)

Symbol
D1
D2
D3
D4

mm (in.)
13 (0.5)
55.5 (2.2)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
PTT & Hydro-tilt

40V

50H

E60H

F50D

FT50C

C/L
B5

B5
B3

B9 B9 B9

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
126 (5.0)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
355 (14.0)
138 (5.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)
203 (8.0)
18.5 (0.73)

Symbol
C1
C2
C3

1-43

mm (in.)

69 (2.7)

Symbol
D1
D2
D3
D4

mm (in.)
13 (0.51)
60.5 (2.4)
13 (0.51)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

30D

40V

50H

C/L
B5

B11

B12

B11

D1
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
62.5 (2.5)
208 (8.2)
121.5 (4.8)
32 (1.3)
131.5 (5.2)
245 (9.6)

Symbol
B8
B9
B10
B11
B12

mm (in.)

25 (0.98)

90.5 (3.6)
57 (2.2)

Symbol
C1
C2
C3

1-44

mm (in.)
30 (1.2)
66 (2.6)

Symbol
D1
D2
D3
D4

mm (in.)
10.5 (0.41)
26 (1.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Manual tilt

E48C

E55C

C/L
B11

B12

B11

AN1

B3
B5

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
96 (3.8)
230 (9.1)
119 (4.7)

129 (5.1)
254 (10.0)

AN2

Symbol
B8
B9
B10
B11
B12

mm (in.)
95 (3.7)

96 (3.8)
57 (2.2)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-45

mm (in.)

73 (2.9)
12 (0.47)
8 (0.31)
10.5 (0.41)

Symbol
AN1
AN2

mm (in.)
14 (0.55)
12 (0.47)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
55B
60F
US model
Canada model
PTT & Hydro-tilt for S-transom

E60H

C/L
B5

B5
B3

B9 B9 B9

AN2

AN1

AN2

D1
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
329 (13.0)
138.1 (5.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)
203.2 (8.0)
18.5 (0.73)

Symbol
C1
C2
C3

1-46

mm (in.)

68.5 (2.7)

Symbol
D1
D2

mm (in.)
13 (0.51)
55.5 (2.2)

Studbolt hole:
M12 1.25-40 deep

D4
AN1
AN2

19 (0.75)
101.5 (4.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
55B
55D
US model
Canada model
Global model
90A
E60H
US model
Canada model
90
PTT & Hydro-tilt for L/X-transom

60F

70B

75A

E60J

E65A

E75B

75C

85A

C/L
B5

B5
B3

B9 B9B9
B8

AN2

AN1

AN2

Symbol
B1
B2
B3
B4
B5
B6
B7

D1
B1

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
352 (13.9)
138.1 (5.4)

Symbol
B8
B9
B10
B11
B12

mm (in.)
203.2 (8.0)
18.5 (0.73)

Symbol
C1
C2
C3

1-47

mm (in.)

68.5 (2.7)

Symbol
D1
D2

mm (in.)
13 (0.51)
55.5 (2.2)

Studbolt hole:
M12 1.25-40 deep

D4
AN1
AN2

19 (0.75)
101.5 (4.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
PTT

F75B
F75
F75A

F80B

F90B
F90
F90A

F100D

C/L
B5

B5
B3

B9 B9 B9 B4

B13

AN1

AN2

Symbol
B1
B2
B3
B4
B5
B6
B7

AN2
D1
B1

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
368 (14.5)

Symbol
B8
B9
B10
B11
B12
B13

mm (in.)

18.5 (0.73)

20 (0.79)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-48

mm (in.)

80 (3.1)
13 (0.51)
55.5 (2.2)

Symbol
AN1
AN2

mm (in.)
19 (0.75)
101.5 (4.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
PTT & Hydro tilt

E115A

115B

115C

130B

140B

L/150A

L/200A

150F

150G

200G

200F

225D

Z150P

Z175G

Z175H
VZ175

Z/LZ200N
Z/LZ200

Z200P

F75C

F80C

Z150
F95A

Z150Q
VZ150
VZ150
F100B

F/FL150B

F225C

C/L

B9B9B9 B4

B3
B13

F/FL115A F/FL150A
F/LF115A F/LF150A
F/LF115A F/LF150A

AN2

AN1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
367 (14.4)

Symbol
B8
B9
B10
B11
B12
B13

mm (in.)

18.5 (0.73)

24 (0.94)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-49

mm (in.)

82 (3.2)
13 (0.51)
55.5 (2.2)

Symbol
AN1
AN2

mm (in.)
52 (2.0)
102 (4.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
F200D
F225D
F250C F225G
US model
VF200LA VF225LA VF250LA
Canada model VF200LA VF225LA VF250LA
PTT

F250F

F275A

C/L
B5

B5
B3

B9B9B9 B4

AN1

D1
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
368 (14.5)

Symbol
B8
B9
B10
B11
B12
B13

mm (in.)

18.5 (0.7)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-50

mm (in.)

82 (3.2)
13 (0.5)
55.5 (2.2)

Symbol
AN1
AN2

mm (in.)
13.5 (0.5)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
L/250G F/FL200B F/FL200C F/FL225B F/FL250A F/FL250G F/FL225F F/FL250D
US model
F/LF200A F/LF225A F/LF250
F/LF225CA F/LF250CA
Canada model
F/LF200A
F/LF225CA F/LF250CA
Global model
F/FL300B
US model
F/LF300CA
Canada model F/LF300CA
PTT

C/L
B5

B5
B3

B9B9B9 B4

B13

AN2
AN1

AN2

D1
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
411 (16.2)

Symbol
B8
B9
B10
B11
B12
B13

mm (in.)

18.5 (0.7)

20 (0.79)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-51

mm (in.)

79 (3.1)
13 (0.5)
55.5 (2.2)

Symbol
AN1
AN2

mm (in.)
52 (2.0)
102 (4.0)

OUTBOARD MOTOR DIMENSIONS

CLAMP BRACKET DIMENSIONS
Global model
US model
Canada model
PTT

F/FL300A F/FL350A
F/LF350CA
F/LF350CA

C/L
B5

B9 B9 B9 B9 B9

AN2
B1

Symbol
B1
B2
B3
B4
B5
B6
B7

mm (in.)
125.4 (4.9)
254 (10.0)
163.5 (6.4)
50.8 (2.0)
180 (7.1)
406 (16.0)

AN1

AN2

B13

Symbol
B8
B9
B10
B11
B12
B13

mm (in.)

18.5 (0.73)

21 (0.83)

Symbol
C1
C2
C3
D1
D2
D3
D4

1-52

mm (in.)

13 (0.51)
92.6 (3.6)

Symbol
AN1
AN2

mm (in.)
19 (0.75)
102 (4.0)

PROPELLERS

PROPELLER SPECIFICATIONS ............................................................. 2-2

PROPELLER TYPES ........................................................................... 2-2
PROPELLER IDENTIFICATION........................................................... 2-4
PROPELLER SELECTION....................................................................... 2-5
2012 PROPELLER APPLICATIONS........................................................ 2-5
STANDARD PROPELLER ................................................................... 2-5
DUAL THRUST PROPELLERS.......................................................... 2-11
WEEDLESS PROPELLERS............................................................... 2-13
RELIANCE SERIES PROPELLERS................................................... 2-13
SALTWATER SERIES PROPELLERS............................................... 2-14
SALTWATER SERIES II PROPELLERS ........................................... 2-15
SALTWATER SERIES HS4 PROPELLERS....................................... 2-17
SATLWATER SERIES XL PROPELLERS ......................................... 2-18
VMAX SERIES PROPELLERS .......................................................... 2-18
PERFORMANCE SERIES PROPELLERS......................................... 2-19
HIGH PERFORMANCE SERIES PROPELLERS............................... 2-19
WOT OPERATION RANGE TABLE....................................................... 2-20

2-1

PROPELLER SPECIFICATIONS

SALTWATER SERIES II
This new breed of stainless steel props is
designed exclusively for offshore fishing boats
and features highly polished, larger diameter
design. The aggressive rake angle and extra
cupping on the blades provide superior midrange fuel efficiency, along with excellent anticavitation performance.
Shift Dampener System (SDS) has been
adopted to reduce the shock and noise when
shifting, and become possible to replace the
propeller damper.
L/H rotation propellers are available for twinengine applications.

PROPELLER TYPES
Yamaha propellers are specifically designed to
match the characteristics of Yamaha outboard
motors.
There are some types of the propeller for the
best matching due to operating condition.
Major types of propeller include:
STANDARD
This is designed as general purpose propellers
for almost operating conditions.
A stainless steel or an aluminum propeller is
available for your preference.
Stainless steel L/H rotation propellers are
available for twin-engine applications.

SALTWATER SERIES XL
New polished stainless steel propellers have
designed for big offshore boats to obtain big
impulsion power.
It features large diameter blade design, especially for F350/F300 (V8) engine.
Shift Dampener System (SDS) has been
adopted to reduce the shock and noise when
shifting, and become possible to replace the
propeller damper.
L/H rotation propellers are available for multiengine applications.

RELIANCE SERIES
New polished stainless steel propellers are
designed to provide for 150PS and bigger
standard type engines.
These propellers are generally more aggressive than black standard stainless steel propellers, and will fit the engines under almost
operating conditions.
L/H rotation propellers are available for twinengine applications.

2-2

PROPELLER SPECIFICATIONS

VMAX SERIES
These polished stainless steel propellers are
designed for a high-speed and light weight
special boat with high-power engine for better
performance.
These specialized propellers are generally more
aggressive than the ventilated type propellers.

SALTWATER SERIES HS4

Polished stainless steel propellers with 4-blade
for V6-3.1L, -3.3L and -4.2L engines, except
for VMAX series.
Compared with the conventional three blades
propeller, four blades make larger propeller
blade surface area, which can catch much
more water and obtain higher thrust performance.
As a result, this propeller will obtain better
acceleration, and stable operation under rough
water.
However, generally boat top speed performance is slightly lesser than three blades propeller.
Shift Dampener System (SDS) has been
adopted to reduce the shock and noise when
shifting, and become possible to replace the
propeller damper.
L/H rotation propellers are available for twinapplication.

PERFORMANCE
These stainless steel propellers with vents for
exhaust gas induction offer the best acceleration and top end performance causing the
engine rpm rapidly increasing with a high rake,
progressive pitch and more cup.
It allows higher transom mounting such as bass
boats, yet does not increase steering torque.

* Shift Dampener System (SDS):

Using a special new design and high-strength
components, much of the resulting force of an
outboard shifting into forward or reverse gear is
absorbed, resulting in far quieter and smoother
operation.

2-3

PROPELLER SPECIFICATIONS

PROPELLER IDENTIFICATION

HIGH PERFORMANCE
The progressive pitch design, highly cupped
blades, and special small hub propellers for
high-performance runabout boats.
The through-hub exhaust system allows the
exhaust gas to outlet the leading edge of each
blade for enhanced acceleration.

The propeller identification of the size is indicated as follows.

Propeller
Diameter
Pitch
=
X
Mark
identification
(inch)
(inch)
Diameter: Diameter of propeller rotating circle.
Pitch:
Logical advancing distance when
propeller rotated one time.
Pitch

Diameter

The location of the propeller identification varies.

Refer to the illustration as shown.

WEEDLESS
This is designed for use in shallow water.
It eliminates weed buildup around the propeller
hub.

4
REAR VIEW

FRONT VIEW

Example:
(1) 7-1/4 X 6 - BS
(2) 21 - ML (Pitch - Mark)
(3) 13 X 17 - K2
(4) 19K (Pitch and Mark)
(5) 9-1/4 X 9 - J

DUAL THRUST
This is designed for sailboat or other large displacement boats.
This redirects the exhaust gases so that the
blades cut through clean water, for higher
efficiency.

* Calculation formula of the logical boat speed is as

below.
^ Boat speed (km/h) = propeller pitch (inch) X
engine speed (r/min) X 0.001524 X propeller
efficiency / gear ratio.
^ Propeller efficiency = Actual advancing distance when propeller rotated one time / Logical
advancing distance when propeller rotated one
time.

2-4

PROPELLER SELECTION
Depending on a model, Yamaha outboard motors are fitted with the propellers which are chosen to
perform well over a range of applications, but there may be the uses where a propeller with a different pitch would be more appropriate.
For a greater operating load, a smaller pitch propeller is more suitable as enables the correct engine
speed at WOT (Wide-Open-Throttle) to be maintained.
Conversely, a larger pitch propeller is more suitable for a smaller operating load.
For details, see the WOT operation range table in this chapter.
Besides, select the best matched propeller series which meets with the purpose of use due to a
classification and/or kind of boat.

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
2 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
7 1/4
4
A
3
7 1/4
4 1/2
A
3
7 1/4
5
A
3
7 1/4
5 1/2
A

Material
Plastic
Aluminum
Aluminum
Aluminum

Part number
6A1-45943-00
646-45944-01
6F8-45942-01
646-45942-01

Remarks
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin

2 3 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
7 1/4
5
BS
3
7 1/4
5 1/2
BS
3
7 1/4
6
BS
3
7 1/4
7 1/4
BS
3
7 1/4
8 1/4
BS

F2A

F2.5A
F2.5
F2.5
Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Part number
6L5-45949-00
6L5-45952-00
6L5-45943-00
6L5-45945-00
6L5-45947-00

Remarks

* Use the thrust washer (68D-G5987-00) for 4-stroke mode, and (6L5-45987-01) for 2-stroke model.

4 6 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
7 1/4
6 1/2
BA
3
7 1/2
7
BA
3
7 1/2
8
BA
3
7 1/2
9
BA

4AC

5CS

Material
Aluminum
Aluminum
Aluminum
Aluminum

2-5

F4B
F5A
F4A
F4A
Part number
6E0-45949-00
6E0-45943-01
6E0-45941-01
6E0-45954-00

F6C
F6A
F6A
Remarks

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
8 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
7 1/4
5
C
3
9
5 3/4
C
3
9
6 1/2
C
3
9
7
C
3
9
7 1/2
C
3
9
9
C
3
9 1/4
9 1/4
C

E8D

E8DK

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Part number
655-45949-00
655-45947-01
655-45945-00
647-45943-00
655-45943-00
647-45947-00
647-45941-00

Remarks
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin
Fitted with shear pin

6 9.9 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
8 1/2
6 1/2
N
3
8 1/2
7 1/2
N
3
8 1/2
8
N
3
8 1/2
8 1/2
N
3
8 1/2
9 1/4
N

F8C
F8A
F8A

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

F9.9F
F9.9A
F9.9A
Part number
6G1-45947-00
6G1-45943-00
6G1-45952-00
6G1-45941-00
6G1-45954-00

Remarks

9.9 15 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9 1/2
6 1/2
J
3
9 1/4
8
J
3
9 1/4
9
J
3
9 1/4
9 3/4
J
3
9 1/4
10
J
3
9 1/4
10 1/2
J
3
9 1/4
11
J
3
9 1/4
12
J

9.9F

15F

E9.9D

15
F15C
F15A
F15A
Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

E15D

EK9.9J

EK15P

EK9.9D

9.9
F9.9H

Part number
683-45949-00
63V-45947-00
63V-45945-00
683-45952-00
63V-45952-00
683-45943-00
63V-45943-00
683-45941-00

* Use the thrust washer (6B8-45987-00) for kerosene model, avoiding propeller damper damage.

2-6

Remarks

EK15D

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
9.9 20 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9 1/4
8
J
3
9 1/4
9
J1
3
9 1/4
10
J1
3
9 1/4
11
J1
3
9 1/4
12
J1

F9.9H

F15C
F15A
F15A
Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

F20B
F20A
F20A

F20C

Part number
63V-45947-00
63V-45945-10
63V-45952-10
63V-45943-10
63V-45941-10

Remarks

20 30 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9 7/8
8
F
3
9 7/8
9
F
3
9 7/8
10
F
3
9 7/8
10 1/2
F
3
9 7/8
11 1/4
F
3
9 7/8
12
F
3
9 7/8
13
F
3
9 7/8
14
F

20D

25N

20
F20D

E/25B

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

25X

Part number
664-45943-01
664-45941-01
62C-45941-00
664-45945-00
664-45947-01
664-45954-01
664-45949-02
664-45952-00

2-7

E/30H

EK25B/C

30D

Remarks

F25D
F25A
F25A

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
FT/T25 & 30 60 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
12 1/4
8
G
3
12 1/4
9
G
3
11 3/4
10
G
3
11 5/8
11
G
3
10 5/8
12
G
3
11 3/8
12
G
3
10 3/8
13
G
3
11 1/8
13
G
3
11 1/8
13
G
3
10 1/4
14
G
3
11 1/4
14
G
3
11 1/4
14
G
3
10
15
G
3
11
15
G
3
10 3/4
16
G
3
10 3/4
17
G
3
12
11
G
3
12
12
G
3
11 1/2
13
G
3
10 1/4
14
G
3
11 1/4
14
G
3
10 1/4
15
G
3
10 1/4
16
G

40V

50H

50
FT25F
F30B
T25A
T25A
F30A
Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

E/40J

EK40J

E/40X

E48C

E55C

F40F
F40A
F40A

F50D

F40D

F50F
F50
F50A

F60C
F60
F60A
Remarks

Part number
63D-45941-00
663-45956-01
663-45954-01
69W-45947-00
6H5-45952-00
69W-45952-00
6H5-45945-00
69W-45945-00
69W-45945-00
6H5-45958-00
69W-45958-00
663-45958-01
6H5-45943-00
69W-45943-00
663-45949-01
663-45941-01
663-45972-60
663-45970-60
663-45974-60
663-45930-00
697-45970-00
663-45976-00
663-45978-00

40 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
11 3/4
7 1/2
H
3
11 3/4
8 3/4
H
3
11 3/4
10
H
3
11 1/2
11
H
3
11 1/2
12
H
3
11 1/2
13
H
3
11 1/2
13 1/2
H

E40G

EK40G

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Part number
676-45956-61
676-45947-62
676-45945-62
676-45941-62
676-45943-62
676-45952-62
676-45949-62

2-8

Remarks
Fitted with drive pin
Fitted with drive pin
Fitted with drive pin
Fitted with drive pin
Fitted with drive pin
Fitted with drive pin
Fitted with drive pin

55B

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
50 115 ps
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14
11
K
3
13 5/8
13
K
3
13 5/8
14
K
3
13 1/2
15
K
3
13 1/4
17
K
3
13 1/2
17
K
3
13
19
K
3
13 1/2
19
K
3
12 5/8
21
K
3
13
23
K
3
13
25
K
3
13 1/2
14
K
3
13 1/2
16
K
3
13
17
K
3
13
19
K
3
13
21
K
3
13
23
K
3
13
25
K

60F

70B

E60H

55D

E60J

E65A

75A

E75B

85A

75C

90A

115C

130B

E115A

115B

140B

FT50C

FT50G
T50
T50A
F95A

90
FT60D
T60
T60A
F100B

F75B
F80B
F75
F75A
F115A
F70A
F115A
F70A
F115A
F70A
Part number
6E5-45954-00
6E5-45949-00
6E5-45958-00
6E5-45947-00
6E5-45945-01
68V-45941-00
6E5-45941-00
68V-45943-00
6E5-45943-00
6E5-45952-00
6E5-45956-00
688-45932-60
688-45978-60
688-45930-02
688-45970-03
688-45972-02
688-45974-02
688-45976-01

F90B
F90
F90A
F40G

F100D

F75C

F80C

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Remarks

Cupped blade
Cupped blade

L115 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
13
17
KL
3
13
19
KL
3
13
21
KL

FL115A
LF115A
LF115A
Material
S-Steel
S-Steel
S-Steel

Part number
6L6-45930-01
6L6-45970-00
6L6-45972-00

2-9

Remarks

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
150 200 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 1/4
15
M
3
14 5/8
16
M
3
14 1/2
17
M
3
14
19
M
3
13 3/4
21
M
3
13 1/2
23
M

150A

200A

150F

F150B

F200B

F200C
F200A
F200A

Material
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

200F

Z150P

Z175G

Part number
6G5-45941-01
6G5-45952-00
6G5-45947-01
6G5-45945-01
6G5-45943-01
6G5-45949-00

Z200N
Z200
Z200

F150A
F150A
F150A

Remarks

L150 L200 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14 1/2
17
ML
3
14
19
ML

L150A

L200A

L200F

LZ200N
LZ200

Material
Aluminum
Aluminum

FL150A
LF150A
LF150A

FL150B

Part number
6K1-45947-00
6K1-45945-00

FL200B

FL200C
LF200A
LF200A

Remarks

150 250 ps
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 3/4
13
M
3
15 1/4
15
M
3
13 3/4
17
M2
3
13 3/4
19
M2
3
13 3/4
21
M
3
13 3/8
23
M
3
13 3/8
25
M

150A

200A

150F

200F

225D

Z150P

Z175G

250G

F150A
F150A
F150A

F150B

F200B

F200C
F200A
F200A

F225B
F225A

F225C

F250G

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Part number
6G5-45932-00
6G5-45970-02
6G5-45978-03
6G5-45974-03
6G5-45972-02
6G5-45976-01
6G5-45930-00

2-10

Remarks

Z200N
Z200
Z200
F250A
F250

2012 PROPELLER APPLICATIONS

STANDARD PROPELLER
L150 L250 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 1/4
15
ML
3
13 3/4
17
ML1
3
13 3/4
19
ML1
3
13 3/4
21
ML
3
13 3/8
23
ML

L150A

L200A

FL200C FL225B
LF200A LF225A
LF200A
Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

L200F

L250G

FL250A
LF250

FL250G

LZ200N
LZ200

FL150A
LF150A
LF150A

Part number
6K1-45970-01
6K1-45978-02
6K1-45974-02
6K1-45972-01
6K1-45976-00

FL150B

Remarks

200 250 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15
17
T
3
14 1/2
19
T
3
14 1/2
21
T

250G

F200B

F200C
F200A
F200A

Material
S-Steel
S-Steel
S-Steel

F225B
F225A

F225C

F250A
F250A

Part number
61A-45978-00
61A-45974-00
61A-45972-00

F250G

Remarks

L200 L250 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15
17
TL
3
14 1/2
19
TL
3
14 1/2
21
TL

L250G

FL200B

FL200C
LF200A
LF200A

Material
S-Steel
S-Steel
S-Steel

FL225B
LF225A

FL250A
LF250A

Part number
61B-45978-00
61B-45974-00
61B-45972-00

FL250G

Remarks

DUAL THRUST PROPELLERS

6 9.9 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9
5
N
3
9
7
N

6C
6

8
Material
Aluminum
Aluminum

F8C
F8A
F8A

2-11

F9.9F
F9.9A
F9.9A
Part number
6G1-W4592-00
6G1-W4591-01

Remarks

FL200B

2012 PROPELLER APPLICATIONS

DUAL THRUST PROPELLERS
8 9.9 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
11 3/4
5 3/4
R
3
11 3/4
7
R
3
11 3/4
8 1/4
R
3
11 3/4
11
R
3
11 3/4
9 1/4
R
3
11 3/4
11
R
3
11 3/4
12 1/4
R

FT8D

FT9.9G
T9.9A
T8A
T9.9A
Material
Aluminum
Aluminum
Aluminum
Aluminum
Plastic
Plastic
Plastic

Part number
69G-45941-00
69G-45943-00
6G8-45947-00
6G8-45941-00
6G8-45945-00
6G8-45941-00
6G8-45943-00

Remarks

9.9 15 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9 3/4
6 1/2
J
3
9 3/4
8
J

9.9F

15F

E9.9D

15
F15C
F15A
F15A
Material
Aluminum
Aluminum

E15D

EK9.9J

EK15P

EK9.9D

9.9
F9.9H

Part number
683-W4592-02
683-W4591-02

Remarks

* Use the thrust washer (6B8-45987-00) for kerosene model, avoiding propeller damper damage.

20 30 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
10 5/8
8 1/4
F

30D

F25D
F25A
F25A
Material
Aluminum

Part number
6J8-W4591-00

Remarks
For PT/PTT model.

Part number
68U-45941-00

Remarks

25 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
12 1/4
9
G

FT25F
T25A
T25A
Material
Aluminum

50 60 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14
11
K

FT50C

FT50G
T50
T50A
Material
Aluminum

FT60D
T60
T60A
Part number
68S-45941-00

2-12

Remarks

EK15D

2012 PROPELLER APPLICATIONS

WEEDLESS PROPELLERS
4 6 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
7 1/4
8 1/4
BA

4AC

5C/S

F4B
F4A
F4A

F5A

Material
Aluminum

F6C
F6A
F6A

Part number
6E0-45952-00

Remarks

20 30 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
9 1/8
12
F
3
9 1/8
13
F

20D

25N

20
F20D

E/25B

25X

Material
S-Steel
S-Steel

E/30H

EK25B/C

Part number
664-45972-00
664-45970-00

30D

F25D
F25A
F25A

Remarks

RELIANCE SERIES PROPELLERS

150 250 PS
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark

150A

200A

250G

F150A/B
F150
F150
Material

150F

200F

F200B

225D

F200C
F225B
F200A
F225A
F200A
Part number

14 1/2

S-steel

68F-45970-00

3
3
3
3

14 1/4
14 1/4
13 3/4
13 3/4

17
18
19
21

M
M
M
M

S-steel
S-steel
S-steel
S-steel

68F-45972-00
68F-45978-00
68F-45974-00
68F-45976-00

Z150P
Z150
F225C

Z175G

F250A
F250A

Z200N
Z200
Z200
FL250G

Remarks
F150 is not recommended.
(*1)

(*1) Propeller noise occurs.

L150 L250 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14 1/4
17
ML
3
14 1/4
18
ML
3
13 3/4
19
ML
3
13 3/4
21
ML

L150A

L200A

L200F

FL225B
LF225A

FL250A
LF250

FL250G

Material
S-steel
S-steel
S-steel
S-steel

L250G

LZ200N FL150A/B FL200B

LZ200
LF150
LF150

Part number
68G-45972-00
68G-45978-00
68G-45974-00
68G-45976-00

2-13

Remarks

FL200C
LF200A
LF200A

2012 PROPELLER APPLICATIONS

SALTWATER SERIES PROPELLERS
150 250 ps
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 1/4
15
M
3
15 1/4
17
M
3
15 1/4
19
M
3
14 7/8
21
M
3
14 1/2
23
M

150F

150A

Z150P

F200B

225D

250G

F150A/B
F150A
F150A
F200B

Z175G

200A

200F

Z200N

F200C
F200A
F200A

F225B
F225A

F225C

F250A
F250

F250G

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Part number
6R4-45976-A0
6R4-45978-A0
6R4-45970-A1
6R4-45972-A0
6R4-45974-A0

Remarks

L150 L250 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 1/4
15
ML
3
15 1/4
17
ML
3
15 1/4
19
ML
3
14 7/8
21
ML
3
14 1/2
23
ML

L150A

FL150A/B

L200A

FL225B
LF225A

FL250A
LF250

FL250G

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

L200F

LZ200N

Part number
6R1-45976-A0
6R1-45978-A0
6R1-45970-A1
6R1-45972-A0
6R1-45974-A0

2-14

L250G

FL200B

Remarks

FL200C
LF200A
LF200A

2012 PROPELLER APPLICATIONS

SALTWATER SERIES II PROPELLERS
150 250 ps (V6 engine)
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 3/4
15
T
3
15 1/2
17
T
3
15 1/4
19
T
3
15
21
T
3
14 3/4
23
T

150F

150A

Z150P

250G

F200B

F200C
F200A
F200A

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

F150A/B
F150A
F150A
F225B
F225A

Z175G

200A

200F

F225C

F250A
F250A

F250G

Part number
6D0-45976-00
6D0-45978-00
6D0-45970-00
6D0-45972-00
6D0-45974-00

Z200N

Remarks
For V6 3.1/3.3L model. (*1)

(*1) The blade contacts to 6J9 lower-case.

Global model
150F
150A
Z150P F150A/B
US model
F150A
Canada model
F150A
Global model
F225F
F250D
F300B
F200B
US model
F225CA F250CA F300CA
Canada model
F225CA F250CA F300CA
Global model
F250G
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
Material
Part number

Z175G

200A

200F

Z200N

F200C
F200A
F200A

F225B
F225A

F225C

F250A
F250A

15 3/4

S-Steel

6CE-45930-00

15 3/4

S-Steel

6CE-45976-00

3
3
3
3

15 1/2
15 1/4
15
14 3/4

17
19
21
23

T
T
T
T

S-Steel
S-Steel
S-Steel
S-Steel

6CE-45978-00
6CE-45970-00
6CE-45972-00
6CE-45974-00

* SDS Shift Dampener System

* SDS propeller requires the exclusive spacer (P/N: 6CE-45997-00).
(*1) The blade contacts to 6J9 lower-case.

2-15

Remarks
SDS, For V6 3.1/3.3/4.2L
model. (*1)
SDS, For V6 3.1/3.3/4.2L
model. (*1)
SDS
SDS
SDS
SDS

2012 PROPELLER APPLICATIONS

SALTWATER SERIES II PROPELLERS
L150 L250 ps (V6 engine)
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
15 3/4
15
TL
3
15 1/2
17
TL
3
15 1/4
19
TL
3
15
21
TL
3
14 3/4
23
TL

FL150A/B L200A
LF150A
LF150A
FL225B FL250A FL250G
LF225B LF250A
L150A

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

L200F

LZ200N

Part number
6D1-45976-00
6D1-45978-00
6D1-45970-00
6D1-45972-00
6D1-45974-00

L250G

FL200B

FL200C
LF200A
LF200A

Remarks
For V6 3.1/3.3L model. (*1)

(*1) The blade contacts to 6J9 lower-case.

L200F LZ200N
Global model
L150A FL150A/B L200A
US model
LF150A
Canada model
LF150A
Global model
FL300B FL200B FL200C FL225B FL250A
LF300CA
LF200A LF225A LF250
US model
LF300CA
LF200A
Canada model
Blade Dia. (in) Pitch (in) Mark
Material
Part number
3

15 3/4

S-Steel

6CF-45930-00

15 3/4

S-Steel

6CF-45976-00

3
3
3
3

15 1/2
15 1/4
15
14 3/4

17
19
21
23

TL
TL
TL
TL

S-Steel
S-Steel
S-Steel
S-Steel

6CF-45978-00
6CF-45970-00
6CF-45972-00
6CF-45974-00

* SDS Shift Dampener System

* SDS propeller requires the exclusive spacer (P/N: 6CE-45997-00).
(*1) The blade contacts to 6J9 lower-case.

2-16

L250G

FL225F FL250D
LF225CA LF250CA
LF225CA LF250CA

FL250G

Remarks
SDS, For V6 3.1/3.3/4.2L
model. (*1)
SDS, For V6 3.1/3.3/4.2L
model. (*1)
SDS
SDS
SDS
SDS

2012 PROPELLER APPLICATIONS

SALTWATER SERIES HS4 PROPELLERS
150 250 ps (V6 engine)
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
4
15
21
T
4
15
22
T
4
15
23
T

150F

150A

Z150P

250G

F200B

F200C
F200A
F200A

Material
S-Steel
S-Steel
S-Steel

F150A/B
F150A
F150A
F225B
F225A

Z175G

200A

200F

F225C

F250A
F250

F250G

Part number
6BR-45B70-00-00
6BR-45B72-00-00
6BR-45B74-00-00

Global model
150F
150A
Z150P F150A/B Z175G
US model
F150A
Canada model
F150A
Global model
F225F
F250D
F300B
F200B
F200C
US model
F225CA F250CA F300CA
F200A
Canada model
F225CA F250CA F300CA
F200A
Global model
F250G
250G
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
Material
Part number
4
15
21
T
S-Steel
6CE-45B70-00-00
4
15
22
T
S-Steel
6CE-45B72-00-00
4
15
23
T
S-Steel
6CE-45B74-00-00

Z200N

Remarks

200A

200F

Z200N

F225B
F225A

F225C

F250A
F250

Remarks
SDS
SDS
SDS

* SDS Shift Dampener System

* SDS propeller requires the exclusive spacer (P/N: 6CE-45997-00).

L150 L250 ps (V6 engine)

Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
4
15
21
TL
4
15
22
TL
4
15
23
TL

FL150A/B L200A
LF150A
LF150A
FL225B FL250A FL250G
LF225A LF250
L150A

Material
S-Steel
S-Steel
S-Steel

L200F

LZ200N

L250G

Part number
6BS-45B70-00
6BS-45B72-00
6BS-45B74-00

L200F LZ200N
Global model
L150A FL150A/B L200A
US model
LF150A
Canada model
LF150A
Global model
FL300B FL200B FL200C FL225B FL250A
US model
LF300CA
LF200A LF225A LF250
LF300CA
LF200A
Canada model
Blade Dia. (in) Pitch (in) Mark
Material
Part number
4
15
21
TL
S-Steel
6CF-45B70-00
4
15
22
TL
S-Steel
6CF-45B72-00
4
15
23
TL
S-Steel
6CF-45B74-00
* SDS Shift Dampener System
* SDS propeller requires the exclusive spacer (P/N: 6CE-45997-00).

2-17

FL200B

FL200C
LF200A
LF200A

Remarks

L250G

FL225F FL250D
LF225CA LF250CA
LF225CA LF250CA

FL250G

Remarks
SDS
SDS
SDS

2012 PROPELLER APPLICATIONS

SATLWATER SERIES XL PROPELLERS
300 350 ps (V8 engine)
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
16 1/4
15
X
3
16 1/4
17
X
3
15 1/2
19
X
3
15 1/4
21
X
3
15 1/4
23
X

F300A

F350A
F350CA
F350CA
Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Part number
6AW-45970-10
6AW-45972-10
6AW-45974-10
6AW-45976-10
6AW-45978-10

Remarks
SDS
SDS
SDS
SDS
SDS

* SDS Shift Dampener System

* SDS propeller requires the exclusive spacer (P/N: 6AW-45997-10).

L300 L350 ps (V8 engine)

Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
16 1/4
15
XL
3
16 1/4
17
XL
3
15 1/2
19
XL
3
15 1/4
21
XL
3
15 1/4
23
XL

FL300A

FL350A
LF350CA
LF350CA
Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Part number
6AX-45970-10
6AX-45972-10
6AX-45974-10
6AX-45976-10
6AX-45978-10

Remarks
SDS
SDS
SDS
SDS
SDS

* SDS Shift Dampener System

* SDS propeller requires the exclusive spacer (P/N: 6AW-45997-10).

VMAX SERIES PROPELLERS

200 275 ps (SHO engine)
Global model
F200D
F225D
F250C
F225G
F250F
VF200LA VF225LA VF250LA
US model
Canada model
VF200LA VF225LA VF250LA
Blade Dia. (in) Pitch (in) Mark
Material
Part number
3
14 1/2
23
T1
S-Steel
6CB-45974-00
3
15 1/8
25
T1
S-Steel
6CB-45972-00
3
15 1/8
27
T1
S-Steel
6CB-45970-00
3
14 3/4
29
T1
S-Steel
6CB-45976-00

2-18

F275A

Remarks
Ventless
Ventless
Ventless
Ventless

2012 PROPELLER APPLICATIONS

PERFORMANCE SERIES PROPELLERS
50 140 ps
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
13 1/2
17
K
3
13 1/2
19
K
3
13 1/2
21
K
3
13 1/2
23
K

FT50C

E75B

FT50G
T50
T50A
75/85A

F100D

E115A

Material
S-Steel
S-Steel
S-Steel
S-Steel

55D

60F

E60H

90A

F75B/C F80B/C
F75
90
F75A
115B/C F/FL115A 130/140B
F/LF115A
F/LF115A
Part number
62A-45976-00
62A-45974-10
62A-45970-10
62A-45972-10

FT60D
T60
T60A
F90B
F90
F90A

70B

F95A

F70A
F70A
F70A
F100B

Remarks

150 200 ps
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14 1/2
21
M1
3
14 1/2
23
M2
3
14 1/2
25
M2
3
14 1/2
27
M1

200G

Z150Q
VZ150
VZ150
Material
S-Steel
S-Steel
S-Steel
S-Steel

Z175H
VZ175
VZ175

Z200P

Part number
6J9-45976-10
66K-45974-B0
66K-45972-B0
66K-45970-B0

Remarks

HIGH PERFORMANCE SERIES PROPELLERS

60 200 ps
Global model
US model
Canada model
Global model
US model
Canada model
Blade Dia. (in) Pitch (in) Mark
3
14
20
P
3
14
22
P
3
14
24
P
3
14
26
P
3
14
28
P

60F

70B

75/85A

75C

90A

115B/C

L/150A

Z150Q
VZ150

Z175H
VZ175

L/200A

90
L/200F

Z200P

Material
S-Steel
S-Steel
S-Steel
S-Steel
S-Steel

Part number
6E5-45970-10
6E5-45976-10
6E5-45972-10
6E5-45978-10
6E5-45974-10

* For L-transom engine, matching to sports boat.

2-19

130/140B

Remarks
Special purpose
Special purpose
Special purpose
Special purpose
Special purpose

150F

WOT OPERATION RANGE TABLE

With WOT (Wide-Open-Throttle) operation and under a maximum boat load, the engine RPM
should be within the upper half of the WOT speed range.
Select a propeller which fulfills this requirement.

Global Model
2C
3A
4AC, 5C, 5CS
6C
8C
E8D, EK8D
9.9F, 15F, E9.9D, E15D, EK9.9D, EK15D,
EK9.9J, EK15P
20D, 25N
30D
E/25B, E/30H, 25X, EK25B, EK25C
EK40G, E40G, EK40J, E40J
E/40X
40V, 50H
E48C, E55C, 55B
E60H, 60F
70B
55D, E60J, E65A, 75A, E75B, 75C, 85A, 90A
E115A, 115B, 115C, 140B
130B
L/150A, L/200A
150F, 200F
Z150P, Z175G, Z/LZ200N, Z150Q, Z175H,
Z200P
200G, 225D
L/250G

2-stroke engines
US Model

Canada Model

6
8

4,000 5,000
4,500 5,500
4,500 5,500
4,000 5,000
4,500 5,500
4,500 5,500

9.9, 15

4,500 5,500

20, 25

5,000 6,000
4,500 5,500
4,500 5,500
4,500 5,500
4,500 5,500
4,500 5,500
4,500 5,500
4,500 5,500
5,000 6,000
4,500 5,500
4,500 5,500
5,000 6,000
4,500 5,500
4,500 5,500

VZ150, VZ175,
Z/LZ200

WOT range (rpm)

4,500 5,500
5,000 6,000
4,500 5,500

To be continued.

2-20

WOT OPERATION RANGE TABLE

Global Model

4-stroke engines
US Model

F2A, F2.5A
F4B
F5A, F6C

F2.5
F4A
F6A

F8C, FT8D, F9.9F, FT9.9G

F8A, F9.9A, T9.9A

F9.9H, F15C, F20B, F20C

F20D, F25D, FT25F
F30B, F40F
FT50C, F50D

F15A, F20A
F25A, T25A
F40A

F40D, F50F, FT50G, F60C, FT60D

F50, T50, F60, T60

F70A, F40G
F95A, F100B
F75B, F75C, F80B, F80C, F90B, F100D
F/FL115A
F/FL150A, F/FL150B
F/FL200B, F/FL200C, F/FL225B, F225C,
F/FL250A, F/FL250G
F200D, F225D, F250C, F225G, F250F,
F275A

F70A

F/FL225F, F/FL250D, F/FL300B

F/FL300A, F/FL350A

F75, F90
F/LF115A
F/LF150A
F/LF200A,
F/LF225A, F/LF250
VF200LA, VF225LA,
VF250LA
F/LF225CA,
F/LF250CA,
F/LF300CA
F/LF350CA

Canada Model
F2.5
F4A
F6A
F8A, T8D, F9.9A,
T9.9A
F15A, F20A
F25A, T25A
F30A, F40A
F50A, T50A, F60A,
T60A
F70A

WOT range (rpm)

5,250 5,750
4,000 5,000
4,500 5,500
5,000 6,000
5,000 6,000
5,000 6,000
5,000 6,000
5,000 6,000
5,000 6,000

F75A, F90A
F/LF115A
F/LF150A

5,300 6,300
5,000 6,000
5,000 6,000
5,000 6,000
5,000 6,000

F/LF200A

5,000 6,000

VF200LA, VF225LA,
VF250LA
F/LF225CA,
F/LF250CA,
F/LF300CA
F/LF350CA

5,000 6,000
5,000 6,000
5,000 6,000

If the engine RPM exceeds the recommended WOT range, replace to a larger pitch propeller.
If the engine RPM does not reach the recommended WOT range, replace to a smaller pitch propeller.

NOTICE
Do not run the engine at the speed which exceeds WOT range, as the engine could cause a
damage from overload or over rev.
* The engine rpm at WOT operation will be usually changed about 150 rpm if the pitch of propeller has been
changed one inch.
However, the change of rpm varies due to the propeller type, water type (salt or freshwater), boat type
(weight or hull shape), etc.
* The maximum engine RPM will increase when the outboard motor is trimmed out.

2-21

MEMO

REMOTE CONTROLS

REMOTE CONTROL APPLICATIONS .................................................... 3-2

701 SIDE-MOUNT REMOTE CONTROL [Mechanical RC].................. 3-2
703 SIDE-MOUNT REMOTE CONTROL [Mechanical RC].................. 3-3
704 BINNACLE MOUNT REMOTE CONTROL [Mechanical RC] ........ 3-4
6X3 CONCEALED REMOTE CONTROL [Mechanical RC].................. 3-6
6X5 BINNACLE MOUNT REMOTE CONTROL [Mechanical RC]
(FOR US) ......................................................................................... 3-8
6X6 BINNACLE MOUNT REMOTE CONTROL [DERC] .................... 3-10
6X7 CONCEALED REMOTE CONTROL [DERC].............................. 3-15
REMOTE SWITCH APPLICATIONS ...................................................... 3-17
COMBINATION SWITCH PANEL
(IG SWITCH AND EMERGENCY STOP SWITCH) ....................... 3-17
INDEPENDENT SWITCH PANEL ...................................................... 3-25
ADAPTER FOR EMERGENCY STOP SWITCH LEAD...................... 3-31
ENGINE SHUT-OFF LANYARD (CORD)........................................... 3-31
PT/T SWITCH PANEL ........................................................................ 3-31
REMOTE CONTROL CABLES .............................................................. 3-32
SELECTING THE CABLE LENGTH................................................... 3-32
REMOTE CONTROL CABLES APPLICATIONS ............................... 3-32
ROUTING THE REMOTE CONTROL CABLES................................. 3-33
REMOTE CONTROL THROTTLE CABLE FREE-PLAY
ADJUSTMENT ............................................................................... 3-33
REMOTE CONTROL ATTACHMENT KIT ............................................. 3-34
STEERING HOOK .................................................................................. 3-37
STEERING GUIDE ATTACHMENT KIT................................................. 3-40
CONVENTIONAL WIRE HARNESS....................................................... 3-42
SWITCH PANEL HARNESS .............................................................. 3-42
7 TO 10-PIN ADAPTER...................................................................... 3-42
MAIN HARNESS EXTENSION........................................................... 3-42
DIGITAL ELECTRONIC REMOTE CONTROL WIRE HARNESS ......... 3-43
MAIN WIRE HARNESS ...................................................................... 3-43
DUAL STATION WIRE-HARNESS (3-4-6P) ...................................... 3-43
DUAL STATION WIRE-HARNESS (2-12P)........................................ 3-44
DUAL STATION WIRE-HARNESS (3-12P)........................................ 3-44
CONVERSION HARNESS L .............................................................. 3-44
CONVERSION HARNESS M ............................................................. 3-45
CONVERSION HARNESS N.............................................................. 3-45
CONVERSION HARNESS P.............................................................. 3-45

3-1

REMOTE CONTROL APPLICATIONS

A Yamaha outboard motor has one of two throttle control systems, either Push To Open or Pull
To Open.
For example, Push To Open means the throttle valve opens when the remote control inner cable is
extended and then the throttle arm is pushed.
Most models have Push To Open system.
However, some following models have Pull To Open system.
Pull to Open models
20D
25B
25N
(20)
E25B
(25)

30H
E30H

30D

40J
E40J

EK40J

E40G

55B

E60H

The 10-pin connector is usually used for PTT and/or PT (Power Tilt) models.
The 7-pin connector is for manual tilt models. But, F9.9F (F9.9A), FT9.9G (T9.9A), F15C (F15A)
and F20B (F20A) have the 10-pin connector.
Install the remote control box so that there is sufficient clearance between steering wheel and
remote control lever operation area.

701 SIDE-MOUNT REMOTE CONTROL [Mechanical RC]

Designed for smaller models.
The attachment kit may be required to setup the remote control.
Part No.
701-48101-23
701-48101-51
701-48101-E2
701-48101-G1
701-48102-23
701-48102-51
701-48102-E2
701-48102-G1
701-48130-23
701-48130-E0
701-48140-E0

Throttle
Lanyard Neutral
lock
Push Pull stop S/W
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Mount
R
L
1
1
1
1
1
1
1
1
1
1
1

Remarks

701 REMOTE CONTROL DIMENSIONS

76.6 (3.02)

mm (in.)

41.1 (1.62)

32 (1.26) 63 (2.48)

94.5 (3.72)

222.5 (8.76)

62.5 (2.46)

144 (5.67)

52 (2.05)

146 (5.75)
67.5 (2.66)

3-2

REMOTE CONTROL APPLICATIONS

703 SIDE-MOUNT REMOTE CONTROL [Mechanical RC]
Designed for use with all electric start models.
Fitted to almost kinds of boats. Basic control functions are included in the 703 control box.
Throttle
Coupler
Choke PTT
Push Pull
7-pin 10-pin
703-48201-18
1
1
1
703-48201-A4
1
1

Mount
R
L
1
1

703-48202-17

703-48203-17

703-48203-A4

Part No.

*
*
*
*

703-48204-15
703-48205-1A
703-48205-A6

1
1
1

703-48207-1A

703-48207-A6

703-48208-A5

1
1

Remarks

For Twinapplication
For Analog
gauge only
1

1
1

703-48210-18

703-48220-17

703-48230-17

703-48250-1A

703-48272-1A

For additional
tilt SW
For Twinapplication
For Twinapplication
For Analog
gauge only
For additional
tilt SW

Throttle opening direction can be reversed.

Control lever position can be changed to its opposite position.
Spacer which thickness is 13 mm (0.5 in.) is included in the remote control package.
For further information, see the instruction (P/N:703-28199-33) in the package.

703 REMOTE CONTROL DIMENSIONS

116.5 (4.59)

46 (1.81)

16 (0.63)

30
(1.18)

85 (3.35)
56
(2.2)

86 (3.39)

70 (22.76)

226 (8.9)

mm (in.)

40 (1.57)
128 (5.04)

135 (5.31)

64.5 (2.54)
85.5 (3.37)

3-3

REMOTE CONTROL APPLICATIONS

704 BINNACLE MOUNT REMOTE CONTROL [Mechanical RC]
Designed for use with electric start models. Best fitted to a boat with center console.
Single lever or Twin lever is available for engine applications.
Two kinds of control box, Premium or Standard type, is selectable to match boat design, cost, etc.
1

Ref.
No.
1
2
3

*
*
*
*

Part No.
704-48203-P1
704-48205-P1
704-48206-P1
704-48205-B1
704-48207-P1

Throttle
Push Pull
1
1
1
1
1

PT/T

1
1
1
1

Lever
Remarks
R
L Twin
1
Premium
1
Premium
1
Premium
1
Standard
1
Premium

Switch panel and extension wire-harness are required to connect to the engine 10-pin harness.
Throttle opening direction can be reversed.
Lever location can be changed to its opposite position.
For further information, see the instruction (P/N:704-28199-P0) in the package.

3-4

REMOTE CONTROL APPLICATIONS

704 REMOTE CONTROL DIMENSIONS
Single lever

Twin lever
mm (in.)

mm (in.)
103.5 (4.07) 90 (3.54)

70 (2.76)

187.5 (7.38)

126 (4.96)

94.5 (3.72)

105 (4.13)

94.5 (3.72)

74 (2.91)

179.5 (7.07)

70 (2.76)
33 (1.30)

39 (1.54)

106 (4.17)
212 (8.35)

39 (1.54)

135.2 (5.32)

6 (0.23)
6 (0.23)

138 (5.43)

108 (4.25)

55 (2.16)

10 (0.39)

10 (0.39)
109.2 (4.29)

8 (0.31)
57 (2.24)

212 (8.35)

106 (4.17)

213 (8.39)

33 (1.30)

138 (5.43)

153 (6.02)

3-5

REMOTE CONTROL APPLICATIONS

704 REMOTE CONTROL SPACER
Designed to raise the control box 22 mm (0.9 in.) to make more clearance when the lever is into
WOT position.

(1)

(2)

Ref. No.

Part No.
704-48293-00
704-48293-20
704-48293-30

1
2

Descriptions
For STD single, Not shown
For premium single
For premium twin

6X3 CONCEALED REMOTE CONTROL [Mechanical RC]

Designed for the electric start models. Best fitted to runabout type boats.
The mounting position can be selected from horizontal or inclined 30-degree up or down position
due to boat design.

Part No.
6X3-48206-01

Throttle
Push Pull
1

PT/T
1

Mount
R
L
1

Remarks
With emergency shut-off cord

* Ignition switch panel without engine shut-off cord and extension wire-harness are required to connect to the
engine.
* Throttle opening direction can be reversed.
* For further information, see the instruction in the package.

3-6

REMOTE CONTROL APPLICATIONS

6X3 REMOTE CONTROL DIMENSIONS
mm (in.)
54.2
(2.13)

67.6
(2.66)

88 (3.46)

201 (7.91)

Max. 30 (1.18)

29.6 20.4
(1.17) (0.8)

198.3 (7.81)

52.3
(2.06)

251 (9.88)

60.1
(2.37)
89 (3.5)
123 (4.84)

32.8 (1.29)
(0.

(3.

46.5 (1.83)

120

3.0

(
77

41.8 (1.64) 42 (1.65)

If a panel board thickness is below 20 mm (0.79 in.),

make three 7 mm (9/32 in.) holes and use the supplied
bolts and nuts.
If the board is thicker than 20 mm (0.79 in.), make three
4 mm (5/32 in.) holes and use supplied screws.

28.6

(1.1

13 (0.51)
60.1 (2.36)

3-7

REMOTE CONTROL APPLICATIONS

6X5 BINNACLE MOUNT REMOTE CONTROL [Mechanical RC] (FOR US)
Unique binnacle-mount design for triple-application for F225 and F250 with mechanical remote control.
Requires to combine with the genuine triple-switch panel and Digital Network Gauge System (6Y8).

Part No.
6X5-48207-01

Throttle
Push Pull
1

PT/T
1

Mount
R
L
1

Remarks

* Yamaha remote control cable, Premier Series, or equivalent cable (Teleflex CC3300) is recommended for
6X5 remote control box.
* Premier Series is handled by Yamaha Motor Corporation, USA.
* For further information, see the instruction (P/N: 6X5-28199-P0) supplied with package.

3-8

REMOTE CONTROL APPLICATIONS

6X5 REMOTE CONTROL DIMENSIONS
mm (in.)
N

32
F

9.8

18 (0.71)

Max.
67

267 (10.51)

7.5

252 (9.92)

Max.
90

176 (6.93)

179 (7.05)
200 (7.87)

172 (6.77)

223 (8.78)

205 (8.07)

172 (6.77)
6 (0.24)

86 (3.39)

* If the mounting board is thinner than 20 mm (0.8 in.),

make four 6 mm (0.24 in.) diameter holes and secure
the remote control box with the supplied bolts and nuts.
If the supplied tapping screws are used, make four 3.5
mm (0.14 in.) diameter holes.

Cut off
shaded
area

83 (3.27)

100 (3.94)

Template

3-9

183 (7.20)

100 (3.94)

200 (7.87)

R3 (0.12)

BOW

REMOTE CONTROL APPLICATIONS

6X6 BINNACLE MOUNT REMOTE CONTROL [DERC]
Exclusive binnacle remote control unit, which requires no mechanical remote control cables.
The throttle and shift operations are electrically controlled by new Digital Network System, which will
obtain smoother remote control operation without cable friction.
Rigging has been simplified, because the mechanical cable installation and adjustment are not
required.
These remote control units cover single, twin, triple and quad engine application.

Ref.
No.
1

3
4

Part No.
6X6-48205-31
6X6-48205-41
6X6-48205-51
6X6-48207-31
6X6-48207-41
6X6-48207-51
6X6-48208-41
6X6-48208-51
6X6-48209-01
6X6-48209-11

Variation
code
Single
A
1
C
1
G
1
B
D
H
F
K
L
M

Engine
Twin Triple

Quad

Single
station
1
1

Dual station
Main
2nd

Remarks
Single station only

1
1

1
1
1

1
1

Single station only

1
1
1

w/ PTT SW panel
w/ PTT SW panel

* For further information, see the instruction which is supplied with the remote control package.
* Quad engine RC is applicable to 2011 and later F/LF350 for US.

3-10

REMOTE CONTROL APPLICATIONS

DERC ENGINE SELECTION
This RC unit accepts all DERC engines.
The initial setting is completed for new DERC engines.
If this RC unit is used for previous DERC engines such as F250B and F300(V8) for 2011 model, follow the procedure below.
1. Remove the black cap.
2. Disconnect the white coupler, and connect it to the black coupler.
3. Attach the black cap to the white coupler for waterproofing.
* If the re-setting is wrong, the engine will not start.
* The RC unit with variation code [A] is not required for setting to select the engine.

Example: twin engine

WIRE-HARNESS

For previous
DERC engine

BLK

Cap
Br

Cap
P

WHT

For new DERC engine

(initial setting)

For new DERC engine

(initial setting)

3-11

REMOTE CONTROL APPLICATIONS

6X6 REMOTE CONTROL DIMENSIONS
The side view is the same among all remote control unit variation.
mm (in.)

22.5
.
deg
F

Shift
range
5 deg.

Shif
t
rang
e

22
de .5
g.
R

170 (6.69)

e
ng
ra

Th
ro
ttl
e

ra
ng
e

e
ttl
ro
Th

Max.
67 deg.

225 (8.86)

35 (1.38)

Max.
90 deg.

128 (5.04)
182 (7.17)

Single engine
145 (5.71)

Cut out shaded area

62 (2.44)

132 (5.20)

59 (2.32)

106 (4.17)

5.5 (0.22)

Template (single lever)

To be continued.

3-12

REMOTE CONTROL APPLICATIONS

Twin-engine
mm (in.)
145 (5.71)

Cut out shaded area

105 (4.13)

172 (6.77)

102 (4.02)

132 (5.20)

5.5 (0.22)

Template (twin lever)

Triple-engine
116 (4.57)
145 (5.71)

213 (8.39)

M6 tapping mount screw

Cut out shaded area

105 (4.13)

132 (5.20)

102 (4.02)

172 (6.77)

5.5 (0.22)

Template (same as twin engine)

Center RC ECM bracket

To be continued.

3-13

REMOTE CONTROL APPLICATIONS

Quad-engine
mm (in.)

172 (6.77)

116 (4.57)

208 (8.19)

149 (5.87)

100 (3.93)

145 (5.71)
132 (5.20)

105 (4.13)

102 (4.02)

41
(1.61)

6 (0.24)

ECM for C-PORT/ C-STBD

Template for RC unit

304 (12)
14
(0.55)

115 (4.53)

37
(1.48)

LRG

87 (3.43)

WG P
XXX
Y L Or

812 (32)
99 (3.90)

66 (2.60)

R10 (0.39)
6 (0.24)

71 (2.80)

94 (3.70)

Template for PTT SW

3-14

REMOTE CONTROL APPLICATIONS

6X7 CONCEALED REMOTE CONTROL [DERC]
Exclusive concealed remote control unit, which requires no mechanical remote control cables.
The throttle and shift operations are electrically controlled by new Digital Network System, which will
obtain smoother remote control operation without cable friction.
Rigging has been simplified, because the mechanical cable installation and adjustment are not
required.

Part No.
6X7-48206-10

Engine
Variation
code
Single Twin Triple
A

Mount
R
L
1

* Ignition switch panel (P/N: 64D-82570-20) is required.

* Dual-station system is not acceptable.
* For further information, see the instruction which is supplied with the remote control unit.

3-15

Remarks
With emergency
shut-off SW

REMOTE CONTROL APPLICATIONS

6X7 REMOTE CONTROL DIMENSIONS
96.2
(3.79)

18
57
(0.71) (2.24)

mm (in.)

130 (5.12)

170 (6.69)

27 (1.06)

155 (6.10)

Mount board
Shift
5
22. . range
deg

Shift
range
N

ttle

ra
n

n
ra

ttl

* Wire-harness length:
approx. 2 m (6.5 ft)

22.
deg 5
.

Max.
67 deg.

54.4
(2.14)
38 (1.50)

Max.
90 deg.

56.5 (2.22)

6.4 (0.25)

39.5
(1.56)

17.5
(0.69)

16.5
(0.65)

12.7
(0.50)

40.5
(1.59)

213 (8.39)

M6 tapping mount screw

116 (4.57)

59.5 (2.34)

35 (1.38)

43
(1.69)
Make three 7 mm (9/32 in) holes for mounting with bolts and nuts.
Drill 4 mm (5/32 in) holes for tapping screws, if the board is thicker
than 20 mm (0.79 in).

Template

ECM bracket

3-16

REMOTE SWITCH APPLICATIONS

COMBINATION SWITCH PANEL (IG SWITCH AND EMERGENCY STOP SWITCH)
SINGLE IG SWITCH W/ PANEL
Ref. No.

Part No.
704-82570-09
6R5-82570-05
6X6-82570-30
6X6-82570-00

1
2
3

Description
w/ choke SW
w/o choke SW, For Prime start model or Digital network system (6Y8)
For Digital network system (6Y9), Main helm
For Digital network system (6Y8), 2nd helm

mm (in.)
68 (2.68)

93 (3.66)

54 (2.12)

110 (4.33)

25.5 (1.0)

44.5 (1.75)

93 (3.66)

24.3 (0.95)

51 (2.0)

60
(2.36)

355 (13.98)

5.6 (0.22)
Cut out shaded area

R
Y
G
B

Br
L
R

mm (in.)
97.4 (3.83)
53 (2.09)

114 (4.49)

12 (0.47)

66 (2.60)

49.4 (1.94)

5.6 (0.22)

100 (4.00)

54 (2.13)
Cut out shaded area

To be continued.

3-17

REMOTE SWITCH APPLICATIONS

SINGLE IG SWITCH W/ PANEL

51 (2.0)

mm (in.)
68 (2.68)

86 (3.39)

140 (5.51)

Cut out shaded area

130 (5.12)

24 (0.94)

52.4 (2.06)

24 (0.94)

113 (4.49)

25.5 (1.0)

5.5 (0.22)

SINGLE IG SWITCH W/O PANEL

Description
With choke switch

mm (in.)
Max. 4 (0.16)

110 (4.33)

20 (0.79)

3.5 Nm,
0.35 kgfm,
2.6 ftlb

60
(2.36)

355 (13.98)

16 (0.63)

93 (3.66)

Part No.
704-8257C-00

Max. 4 (0.16)

W
R
Y
G
B

Ref. No.
1

Br
L
R

3-18

REMOTE SWITCH APPLICATIONS

TWIN IG SWITCH
Ref. No.
1
2
3
4
5

Part No.
6K1-82570-08
61B-82570-03
6Y8-82570-02
6X6-82570-40
6X6-82570-10
6X6-82570-60
6X6-82570-E0

Description
w/ choke SW
w/o choke SW
For Digital network system (6Y8), Main helm
For Digital network system (6Y9), Main helm
For 2nd helm (6Y8)
For main helm (6Y9), w/o buzzer, Required [No.3]
For 2nd helm (6Y9), w/ buzzer

mm (in.)

128 (5.04)
145 (5.71)

97 (3.82)

54 (2.13)

340 (13.39)

5.6 (0.22)

110 (4.33)

24.25 (0.95)

93 (3.66)

25.9 (1.02)

Cut out shaded area

P
B
Br
R
Y
G
B

W
L
R

mm (in.)
113 (4.45)

3.3 (0.13)

66 (2.60)
25 (0.98)

54
(2.13)

338 (13.3)

Cut out shaded area

154 (6.06)

66 (2.60)

5.5 (0.22)

50 (1.97)

*110 (4.33)

*For reference
138 (5.43)

To be continued.

3-19

REMOTE SWITCH APPLICATIONS

TWIN IG SWITCH

mm (in.)
97.4 (3.83)
5.6 (0.22)

114 (4.49)

12 (0.47)

66 (2.60)

49.4 (1.94)

53 (2.09)

100 (4.00)

54 (2.13)
Cut out shaded area

mm (in.)

109 (4.29)
25 (0.98)

86 (3.39)

126 (4.96)

Cut out shaded area

140 (5.51)

130 (5.12)

52.4 (2.06)

24 (0.94)
5.5 (0.22)

mm (in.)
12 (0.47)

5
70.4 (2.77)
87 (3.42)

55 (2.17)

5.6 (0.22)

38.4
(1.51)

28.3 (1.11)

44.45 (1.75)
Cut out shaded area

3-20

61.5 (2.42)

113 (4.45)

24 (0.94)

25 (0.98)

REMOTE SWITCH APPLICATIONS

TRIPLE IG SWITCH
Ref. No.
1
2
3

Part No.
6X5-82570-01
6X6-82570-50
6X6-82570-20
6X6-82570-70
6X6-82570-F0

Description
For Digital network system (6Y8), Main helm
For Digital network system (6Y9), Main helm
For 2nd helm (6Y8)
For main helm (6Y9), w/o buzzer, Required [No.2]
For 2nd helm (6Y9), w/ buzzer

mm (in.)
128 (5.04)

5.5 (0.22)

370 (14.57)

54
(2.13)

510 (20.08)

Cut out shaded area

*130 (5.12)

145 (5.71)

110 (4.33)

24.25 (0.95)

93 (3.66)

25.9 (1.02)

* Minimum mounting depth (for reference)

mm (in.)
97.4 (3.83)
5.6 (0.22)

114 (4.49)

12 (0.47)

66 (2.60)

49.4 (1.94)

53 (2.09)

100 (4.00)

54 (2.13)
Cut out shaded area

To be continued.

Cut out shaded area

3-21

REMOTE SWITCH APPLICATIONS

TRIPLE IG SWITCH

mm (in.)

167 (6.57)
25 (0.98)

24 (0.94)

52.4
(2.06)

Cut out shaded area

24 (0.94)

113 (4.45)

25 (0.98)

5.5 (0.22)

86 (3.39)

140 (5.51)

130 (5.12)

184 (7.24)

12 (0.47)

mm (in.)
97.4 (3.83)
55.2 (2.17)

44.45 (1.75)
Cut out shaded area

3-22

5.6 (0.22)

38.4
(1.51)

55 (2.17)

61.5 (2.42)

114 (4.49)

REMOTE SWITCH APPLICATIONS

QUAD IG SWITCH
Ref. No.

Part No.
6X6-82570-M0
*6X6-82570-R0
*6X6-82570-S0
*6X6-82570-T0
*6X6-82570-U0
6X6-82570-J0
6X6-82570-K0

Description
For Digital Network System (6Y9), Main helm, Assembled P, CP, CS and S as below*
For P engine
For CP engine
For CS engine
For S engine
For 2nd helm (6Y9), P/CP engine
For 2nd helm (6Y9), CS/S engine

mm (in.)

P/ CS SW PANEL
EX: P SW panel
47 (1.85)

5.6 (0.22)

9 (0.35)

114 (4.49)

63 (2.48)

47 (1.85)

63 (2.48)

54 (2.13)
(*1)

665 (26.2)
140 (5.51)

(*1) CS SW panel has CS mark.

P
W

B W

G
L

B
Y

(*1)

R Y

CP/ S SW PANEL
EX: CP SW panel
63 (2.48)

5.6 (0.22)

mm (in.)

114 (4.49)

9 (0.35)

63 (2.48)

47 (1.85)

54 (2.13)

(*1) S SW panel has S mark.

595 (23.4)
140 (5.51)

(*1)

P
W

B W

G
L

(*1)

Y R

3-23

To be continued.

REMOTE SWITCH APPLICATIONS

QUAD IG SWITCH
mm (in.)

EX: P/CP SW panel

61.5 (2.42)
P
L/W

Br
Y

L/W
P

Y
Br

450 (17.7)

55 (2.17)
70.4 (2.77)
28.3 (1.11)

12 (0.47)

The recognition letter such as

P, CP, S, CS is stamped on the
surface protection film.

87 (3.43)

5.6 (0.22)

38.4
(1.51)

44.5 (1.75)
Cut out shaded area

3-24

REMOTE SWITCH APPLICATIONS

INDEPENDENT SWITCH PANEL
IG SWITCH W/ PANEL
Ref. No.
1
2
3
4

Part No.
64D-82570-03
64D-82570-20
6X6-82570-80
6X6-82570-C0

Description
w/ bullet connectors for emergency stop SW
w/ 2P coupler for emergency stop SW, For 6X3 & 6X7 RC
For Digital network system (6Y9), 2nd helm, Single engine
For Digital network system (6Y9), Multi-application (All engine start)

mm (in.)
114 (4.49)

63 (2.48)

47 (1.85)

54 (2.12)

B
Y

P
B

355 (13.98)

140 (5.51)

5.6 (0.22)

70 (2.75)

63 (2.48)

47 (1.85)

9 (0.35)

To stop S/W
Br

R
Y
G
B

L
R

mm (in.)
47 (1.85)

114 (4.49)

63 (2.48)

B
Y

355 (13.98)

140 (5.51)

54 (2.12)

To stop S/W
B

Br
L

R
Y
G
B

5.6 (0.22)

70 (2.75)

63 (2.48)

47 (1.85)

9 (0.35)

To be continued.

3-25

REMOTE SWITCH APPLICATIONS

IG SWITCH W/ PANEL

61.5 (2.42)

50 (1.97)

55 (2.17)

5.6 (0.22)

38.4
(1.51)

33.4 (1.31)

12 (0.47)

mm (in.)

38.1 (1.5)

Y P
Br

61.5 (2.42)

50 (1.97)

55 (2.17)

5.6 (0.22)

38.4
(1.51)

33.4 (1.31)

12 (0.47)

mm (in.)

38.1 (1.5)

Br Br
Br Y

3-26

REMOTE SWITCH APPLICATIONS

IG SWITCH W/O PANEL
Ref. No.
1
2

Part No.
704-82510-07
6X3-8257B-00

Description
With bullet connectors for stop switch
With 2-pin coupler for stop switch, For 6X3 and 6X7 RC

mm (in.)
R
Y
G
P
Y
W

B
B
Br

G
W

To
To
buzzer stop SW
175 (6.89)

Max. 4 (0.16)

380 (15)

mm (in.)

Max. 4 (0.16)

To stop SW
Y
W
L

P B

Br
G
R
B
G
Y
R

140 (5.51)
355 (14)

3-27

REMOTE SWITCH APPLICATIONS

EMERGENCY STOP SWITCH W/ PANEL
Part No.
64D-82570-10
64D-82570-30
6X6-82570-90
6X6-82570-V0

Description
w/ bullet connectors for stop SW
w/ 2P coupler for stop SW
For Digital network system (6Y9), 2nd helm, Single/Twin/Triple engine
For Digital network system (6Y9), Quad engine special

47 (1.85)

63 (2.48)

47 (1.85)

54 (2.12)

B
W

5.6 (0.22)

mm (in.)

9 (0.35)

63 (2.48)

1000 (39.4)

Ref. No.
1
2
3
4

63 (2.48)

9 (0.35)

5.6 (0.22)

54 (2.12)

50 (1.97)

5.6 (0.22)

mm (in.)
55 (2.17)

33.4 (1.31)

(1000 (39.37))

38.4
(1.51)

mm (in.)

1000 (39.4)

47 (1.85)

63 (2.48)

47 (1.85)

38.1 (1.5)

W W W
B B B

50 (1.97)

5.6 (0.22)

Clearance:
10 30 mm,
0.39 1.18 in

12
(0.47)

mm (in.)

53 (2.07)

1000 (39.4)

55 (2.17)

33.4 (1.31)

38.4
(1.51)

38.1 (1.5)

W W W
B B B

3-28

REMOTE SWITCH APPLICATIONS

EMERGENCY STOP SWITCH W/O PANEL
Part No.
688-82575-10
64D-82575-10

Description
With bullet connectors for stop switch
With 2-pin coupler for stop switch

2
mm (in.)

mm (in.)

16 (0.63)
1000 (39.4)

16 (0.63)

3.5 Nm,
0.35 kgfm,
2.6 ftlb

1000 (39.4)

Ref. No.
1
2

Max. 4 (0.16)

Max. 4 (0.16)
B

3-29

REMOTE SWITCH APPLICATIONS

STATION SELECTOR SWITCH
Ref. No.
1
2
3

Part No.
6X6-82570-A0
6X6-82570-B0
6X6-82570-L0

Description
For Digital network system (6Y8), Dual station
For Digital network system (6Y9), Dual station, Single/Twin/Triple engine
For Digital network system (6Y9), Dual station, Quad engine special

mm (in.)
110 (4.33)

68 (2.68)

37.2
(1.46)

51 (2.01)

49 (1.93)

66 (2.60)

22
(0.87)

5.5 (0.22)
G G G
B B B

110 (4.33)

61.5 (2.42)

50 (1.97)

55 (2.17)

5.6 (0.22)

38.4
(1.51)

33.4 (1.31)

12 (0.47)

38.1 (1.5)

G G G
B B B

3
50 (1.97)

61.5 (2.42)

55 (2.17)

5.6 (0.22)

38.4
(1.51)

33.4 (1.31)

38.1 (1.5)

200 (7.87)

3-30

12
(0.47)

REMOTE SWITCH APPLICATIONS

ADAPTER FOR EMERGENCY STOP SWITCH LEAD
Ref. No.
1
2

Part No.
6X3-81971-00
6X3-81971-10

Description
2-pin coupler - bullet connector
Bullet connector - 2-pin coupler

2
mm (in.)

mm (in.)

100 (3.94)

W
W

ENGINE SHUT-OFF LANYARD (CORD)

Part No.
682-82556-00

Description

1300 (51.2)

mm (in.)

PT/T SWITCH PANEL

Description
For PT/T models

mm (in.)

DOWN

(32 )

R
L

TRIM & TILT

62 (2.44)

Part No.
688-82563-10

960 (37.8)
19.2
(0.76)

10
(0.39)

3-31

REMOTE CONTROL CABLES

APPLICATIONS

SELECTING THE CABLE LENGTH

Yamaha remote control cables are available in

lengths from 6 feet to 27 feet. The cables utilize 10 32 threaded ends.

Use the following examples as a guide for

measurement. Obviously, different boats will
require different routing, therefore different
lengths are required.

Part No.

1. Choose a mounting location for the remote

control box which will provide comfortable
operation and unobstructed movement of
the hand lever and control mechanism.

701-48310-10
701-48310-20
701-48310-40
701-48310-60
701-48310-80
701-48310-90
701-48320-00
701-48320-20
701-48320-30
701-48320-50
701-48320-60
701-48320-80
701-48320-90
701-48320-40
701-48320-70
701-48350-00
701-48350-10
701-48350-20
701-48350-30
701-48350-40
701-48350-50
701-48350-60

* Minimum clearance below the binnacle control mounting surface for cables is 400 mm
(16 in). Also, minimum clearance behind the
703 control box for the control cables is 400
mm (16 in).

2. Measure from the control box position along

an unobstructed path to shift and throttle
connections in the motor. The cable lengths
are overall length. When a measurement is
in feet and inches, specify next whole foot.
Add 3 feet for loop (see illustration below).

Cable length = A + B + 3 feet

A + C + 3 feet

RC cable length
Feet
Meters
6
1.8
7
2.1
8
2.4
9
2.7
10
3.0
11
3.4
12
3.7
13
4.0
14
4.3
15
4.6
16
4.9
17
5.2
18
5.5
19
5.8
20
6.1
21
6.4
22
6.7
23
7.0
24
7.3
25
7.6
26
7.9
27
8.2

* If Yamaha remote control cable is not available, a

Teleflex Morse CC3300 (BLK)/33C (RED) type
cable is recommended.

Obviously, different boats will require different routing, therefore different lengths are
required.
For example, a thru-transom boat is shown
in the illustration below.

Cable length = A + B + 1 foot

A + C + 1 foot
* When the remote control cable has an extended
length, the neutral adjustment may be difficult due
to increase free play.

3-32

REMOTE CONTROL CABLES

ROUTING THE REMOTE CONTROL CABLES

WARNING
Do not bend the remote control cable to the radius of 300 mm (1 foot) or smaller. Additional
friction will impair the control ability.
1. Route the cable along an unobstructed path of the hull from the remote control box to the engine.
2. Take 3 feet (approximately 1 m) of cable to make a loop in the motor well. This is to prevent the
cables from hard bend when the outboard motor is fully tilted up and steered. See the illustration
below for a typical cable routing.
* Refer to the instruction manual packed in the remote control box for the installation and routing of the remote
control cable.
Loop

REMOTE CONTROL THROTTLE CABLE FREE-PLAY ADJUSTMENT

The mechanical remote control cable free-play adjustment is required for proper remote throttle
control operation.
For the first, install the remote control cables to the remote control box, and put the remote control
lever into the neutral/ idle position.
* For detail procedure to install the remote control cables to the remote control box, see the instruction which
is supplied with the remote control unit, or applicable service literature.

Adjust the inner cable free-play as follows;

PUSH-TO-OPEN TYPE
1. Pull out the inner cable by the force of 15 N (1.5 kgf, 3 lb) to remove the cable free-play.
2. Set the throttle valve control arm to contact onto its stop plate.
3. Install the cable joint, and adjust it to align with the pin of throttle arm.
4. Connect the joint securely to the pin.
5. Check the throttle for proper operation.
Pull [15 N, 1.5 kgf, 3 lb]
Engine side

PULL-TO-OPEN TYPE
1. Push in the inner cable by the force of 15 N (1.5 kgf, 3 lb) to remove the cable free-play.
2. Set the throttle valve control arm to the fully closed (idle) position.
3. Install the cable joint, and adjust it to align with the pin of throttle arm.
4. Connect the joint securely to the pin.
5. Check the throttle for proper operation.
Push [15 N, 1.5 kgf, 3 lb]
Engine side

3-33

REMOTE CONTROL ATTACHMENT KIT

If the specified tightening torque for the bolts and nuts is not mentioned in the figure, use standard
torque as follows.
Bolt size
M5
M6
M8
Part No.
Global model
US model
Canada model

General torque table

Nm
kgfm
5
0.5
8
0.8
18
1.8

6C
6

lbft
4
6
13

6G1-48501-50
8C

Part No.
Global model
US model
Canada model

6AH-48501-00
F9.9H F15C F20B F20C
F15A F20A
F15A F20A

To be continued.

3-34

REMOTE CONTROL ATTACHMENT KIT

Part No.
Global model
US model
Canada model

F8C
F8A
F8A

9.9F
9.9

60R-G8501-00
FT8D F9.9F FT9.9G
F9.9A T9.9A
T8A F9.9A T9.9A

Part No.
Global model
US model
Canada model
For ball post

Part No.
Global model
US model
Canada model

63V-48501-00
15F
15

E8D

655-48501-10
EK8D

6BL-48501-00
F25D
F25A
F25A

To be continued.
3-35

REMOTE CONTROL ATTACHMENT KIT

Part No.
Global model
US model
Canada model

20D
20

6L2-48501-11
25N

Part No.
Global model
US model
Canada model

Part No.
689-48501-01-4D (Ref.1)
Part No.
689-48501-21-4D (Ref.2)
Global model
E/25B 25X E/30H
US model
Canada model
Ref.1 for rope, Ref.2 for ball post/ STR guide

Part No.
Global model
US model
Canada model

3-36

6J8-48501-03
30D

66T-48501-01
E/40X

STEERING HOOK
Part No.
Global model
US model
Canada model
For STR guide

Part No.
Global model
US model
Canada model
For STR guide

Part No.
Global model
US model
Canada model
For ball post

69G-48511-20

Part No.
Global model
US model
Canada model
For STR guide

63V-48511-01
FT8D 9.9F
15F

Part No.
Global model
US model
Canada model
For STR guide

FT8D
T8A

F8C
F8A
F8A

9.9F
9.9

T8A

9.9

6G8-48511-10
15F
30D

Part No.
Global model
US model
Canada model
Global model
US model
Canada model
Global model
US model
Canada model
For STR guide

6AH-48511-00
F9.9H F15C F20B F20C
F15A F20A
F15A F20A

20D
20

6L2-48511-00
25N
25

65W-48511-00
F25D FT25F F30B F40F
F25A T25A
F40A
F25A T25A F30A F40A
F40D F50F FT50G F60C FT60D
F50
T50
F60
T60
F50A T50A F60A T60A
F70A F40G E/40X
F70A
F70A
F20D

To be continued.

3-37

STEERING HOOK
Part No.
Global model
US model
Canada model
For STR guide

676-48511-01
E/40J E40G EK40J EK40G

Part No.
Global model
US model
Canada model
For STR guide

63D-48511-00
50H FT50C F50D

Part No.
Global model
US model
Canada model
For STR guide

40V

Part No.
Global model
US model
Canada model
For STR guide

F75B
F75
F75A

67F-48511-00
F80B F90B F100D
F90
F90A

Part No.
Global model
US model
Canada model
For ball post

75A

688-48511-11
85A
75C
90A
90

F75C

6C
6

68V-48511-00
F80C F95A F100B F115A
F115A
F115A

676-48511-00
8C
E8D EK8D
8

To be continued.

3-38

STEERING HOOK
Part No.
Global model
30D
US model
Canada model
For ball post/ STR guide

6J8-48511-01

Part No.
Global model
US model
Canada model
For rope

Part No.
689-48511-01
Global model
E/25B 25X E/30H
US model
Canada model
For ball post/ STR guide

Part No.
Global model
US model
Canada model
Global model
US model
Canada model
For rope

6C
6
25X

6G8-48511-00
30D

Part No.
69G-48511-10
Global model
FT8D FT9.9G
US model
T9.9A
Canada model
T8A T9.9A
For linkage to main engine

700-48511-12
8C
E8D EK8D E/25B
8
E/30H

3-39

STEERING GUIDE ATTACHMENT KIT

The lock nut (1) for the steering cable joint should loosen 1/4 turns from its seated position. This is
to prevent the joint from friction when the outboard motor is steered.
Part No.
Global model
US model
Canada model

9.9F
9.9

63V-61350-00
15F E9.9D E15D

Part No.
Global model
US model
Canada model

689-61350-02
E/25B E/30H 30D EK/40J E40G

(1)
(1)

Part No.
Global model
US model
Canada model

F8C
F8A
F8A

Part No.
Global model
US model
Canada model

68T-61350-10
FT8D F9.9F FT9.9G
F9.9A T9.9A
T8A F9.9A T9.9A

40V

63D-61350-00
50H FT50C F50D
50

(1)
(1)

Part No.
Global model
US model
Canada model

F15C
F15A
F15A

6AH-61350-00
F20B F20C
F20A
F20A

Part No.
Global model
US model
Canada model
Global model
US model
Canada model

F40D

F70A
F70A
F70A

65W-61350-00
F50F FT50G F60C FT60D
F50
T50
F60
T60
F50A T50A F60A T60A
F40G

(1)

To be continued.
3-40

STEERING GUIDE ATTACHMENT KIT

Part No.
Global model
US model
Canada model

F20D

6BG-61350-00
F25D FT25F F30B
F25A T25A
F25A T25A F30A

Part No.
Global model
US model
Canada model
Global model
US model
Canada model

F40F
F40A
F40A

60F

688-61350-10
70B
75C
90A

75A

90
85A

E60H

(1)
(1)

Part No.
Global model
US model
Canada model

Part No.
Global model
US model
Canada model
Global model
US model
Canada model

697-61350-00
55B

F75C

6E5-61350-02
F80C F95A F100B

115 250
F115 F300 (V6)

(1)
(1)

Part No.
Global model
US model
Canada model

F75B
F75
F75A

Part No.
Global model
US model
Canada model

67F-61350-00
F80B F90B F100D
F90
F90A

6E5-61301-01
40 250
F30 F300 (V6)

Twin engine tie-bar kit

Adjustable distance:
600 mm (23.6 in.) 800 mm
(31.5 in.)

(1)

3-41

CONVENTIONAL WIRE HARNESS

7 TO 10-PIN ADAPTER

An optional wire-harness for the remote control

is prepared. That will help any boats set up the
remote control equipments. Choose a suitable
wire-harness if necessary.
For the wire color code description, see the
table on page 5-34.

Part No.
703-8258A-00
L

Remarks

G R
W

R
B

SWITCH PANEL HARNESS

Length (L)
0.5 m (1.6 ft)

Br
B

7-PIN MAIN HARNESS

Part No.
688-82586-50

Length (L)
5 m (16.4 ft)

Remarks
Without PTT
RC

ENG

L
Br

(L)

Br
R
B

P
G

MAIN HARNESS EXTENSION

7-PIN EXTENSION HARNESS

Part No.
688-82586-11
688-82586-31

To S/W
panel

(L)

Length (L)
2 m (6.6 ft)
3 m (9.8 ft)

Remarks

10-PIN MAIN HARNESS

Part No.
688-8258A-50
688-8258A-60
688-8258A-70
6K1-8258A-40
61B-8258A-01
Y R
Sb
W
L

Length (L)
5 m (16.4 ft)
6 m (19.7 ft)
7 m (23 ft)
8 m (26 ft)
9.5 m (31.6 ft)

G
Lg

R
G

10-PIN EXTENSION HARNESS

Part No.
688-8258A-10
688-8258A-30

To 704/6X3
RC box

P
B

(L)

To S/W
panel

R
B

Y
W

(L)

Length (L)
2 m (6.6 ft)
3 m (9.8 ft)

Remarks

Br
Br

Remarks

B
Br

B Br

B
W
L
B

(L)

3-42

W
P

DIGITAL ELECTRONIC REMOTE CONTROL WIRE HARNESS

MAIN WIRE HARNESS
Between engine and remote control unit
Part No.
6X6-8258A-00
6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40

Length (L)
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 38 ft

Remarks

For DERC unit

Br B R Y
B

R
L

W
W
B
B

R
L

W
B

W
W
B

(L)

DUAL STATION WIRE-HARNESS (3-4-6P)

Between main RC and 2nd RC
Ref. No.
1

Br B R Y

Part No.
6X6-8258A-A1
6X6-8258A-C1
6X6-8258A-E1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0

Length (L)
5 m, 16 ft
8 m, 26 ft
12 m, 38 ft
5 m, 16 ft
8 m, 26 ft
12 m, 38 ft

Remarks
For previous DERC unit

For new DERC unit

(L)

Y Br
X

Y Br
X
L W
L W

L W
L W

W B R
B R B

(L)
Y Br Br

Y Br Br

L W
L W

W B R
B R B

3-43

DIGITAL ELECTRONIC REMOTE CONTROL WIRE HARNESS

DUAL STATION WIRE-HARNESS (2-12P)
Between main RC and 2nd RC
Part No.
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1

Length (L)
5 m, 16 ft
8 m, 26 ft
12m, 38 ft

Remarks
For DERC unit

(L)

Or
R R R R

2nd RC

DUAL STATION WIRE-HARNESS (3-12P)

Between main RC and 2nd RC (Quad engine special)
Part No.
6X6-8258A-R0
6X6-8258A-S0
6X6-8258A-T0

Length (L)
5 m, 16 ft
8 m, 26 ft
12 m, 38 ft

Remarks
For new DERC unit

(L)
Or R/Y
W/L

Or R/Y
W/B

W/L X R/Y X
X X Or X
R R R R

W/B X R/Y X
X X W/L X
R R R R

CONVERSION HARNESS L
Uses to connect new DERC unit to the previous network system.
Part No.
6X6-8258A-L0

Length (L)
150 mm, 6 in

Remarks
For new DERC unit

(L)
Y B

To DERC

X W P Br

X X R X
X

3-44

Y
P

R X

To SW panel

Main RC

DIGITAL ELECTRONIC REMOTE CONTROL WIRE HARNESS

CONVERSION HARNESS M
Uses to connect between new DERC unit and previous 2nd helm single IG switch.
Part No.
6X6-8258A-M0

Length (L)
200 mm, 8 in

Remarks
For 2nd helm, Single engine

(L)
Y P
Br

Y W Br
X B P

To 2nd helm
DERC

To 2nd helm
SW panel

W X X
B X X

CONVERSION HARNESS N
Uses to connect between new DERC unit and previous 2nd helm twin IG switch.
Part No.
6X6-8258A-N0

Length (L)
240 mm, 9 in

Remarks
For 2nd helm, Twin engine

(L)
X P Br Y

To 2nd helm
DERC

Y W Br
X B P

X P Br Y

W X W
B X B

Y W Br
X B P

To 2nd helm
SW panel

CONVERSION HARNESS P
Uses to connect between new DERC unit and previous 2nd helm triple IG switch.
Part No.
6X6-8258A-P0

Length (L)
240 mm, 9 in

Remarks
For 2nd helm, Triple engine

(L)
X P Br Y
P

X P Br Y
X P Br Y

To 2nd helm
DERC

S
W W W
B B B

Y W Br
X B P

C
Y W Br
X B P

3-45

To 2nd helm
SW panel

MEMO

TILLER HANDLES

6X4 MULTI-FUNCTION TILLER HANDLE............................................... 4-2

MULTI-FUNCTION TILLER HANDLE KIT (FOR US)........................... 4-2
WIRING DIAGRAM (FOR US).............................................................. 4-7
EXPLODED DIAGRAM (FOR US) ....................................................... 4-8
MULTI-FUNCTION TILLER HANDLE KIT (FOR JAPAN) .................... 4-9
WIRING DIAGRAM (FOR JAPAN) ..................................................... 4-10
EXPLODED DIAGRAM (FOR JAPAN)............................................... 4-11
MULTI-FUNCTION TILLER HANDLE CONTENTS
(FOR OTHERS) ............................................................................. 4-12
TILLER HANDLE GROMMET DESCRIPTION................................... 4-12
MULTI-FUNCTION TILLER HANDLE KIT (FOR EU & ANZ) ............. 4-13
HANDLE IMMOBILIZER KIT CONTENTS ......................................... 4-15
STEERING FRICTION CONTENTS ....................................................... 4-16

4-1

6X4 MULTI-FUNCTION TILLER HANDLE

Yamaha prepares the various multi-function tiller handle kits for F30 to F115 and 40 to 90 engines.
For US, the tiller handle kit for F25 is specially prepared.
This handle has the electrical functions which are similar as that of 703 remote control box.
Engine IG switch, Emergency stop switch, PTT switch (top or side location), Neutral switch, Throttle
friction adjuster, Shift lever, Throttle control grip, Variable troll RPM switch, LED warning indicators,
and Warning buzzer are included into the handle.
The 10-pin main harness in the handle will allow to easily connect the electrical system to the
engine.

MULTI-FUNCTION TILLER HANDLE KIT (FOR US)

Two kinds of the size for handle extension bracket, four kinds of the length for 10-pin wire harness
and some kinds of the length for control cables are prepared to install the handle according to the
various engine specifications.
The tiller handle kit (only one specification) is prepared for F40 to F115 and 50 to 90 engines.
The fitting kit is prepared for each engine.
Combine the tiller handle kit with the handle fitting kit due to the applicable model, except F25.
For installation procedure, see the instruction supplied with the kit.

Tiller handle assy

Setup manual
Tiller handle kit
(Common use for
50-90 & F40-F115)

Handle extension
Throttle cable
Shift cable
10-pin harness
Steering friction assy
Installation hardware
Troll PPM switch
Short shift lever

4-2

Fitting kit for each

model
(Differs on model)

6X4 MULTI-FUNCTION TILLER HANDLE

TILLER HANDLE KIT CONTENTS
50-90, F40-F115
KIT P/N:6X4-42103-50
Part name
Tiller handle assy
Setup manual

Part No.

6X4-2819K-13

Qty
1
1

Part No.
6X4-42101-23
90185-10051
65W-42508-00
6X4-2819K-13

Qty
1
2
1
1

Remarks
With PTT switch (Top), Required fitting kit.
English

F25A (6BP)
KIT P/N:6X4-42103-04
Part name
Tiller handle assy
Lock nut
Steering friction assy
Setup manual

Remarks
With PTT switch (Top)
M10
English

HANDLE FITTING KIT CONTENTS

Select the fitting kit corresponding with the model.
F115A
KIT P/N:6X4-42102-00
Part name
Fuel pipe clamp 2
Cable clamp 1
Throttle cable
Shift cable
Grommet 2
Corrugated tube
Corrugated tube
Stay
Ext. bracket
10-pin main harness
Stud bolt
Lock nut
Corrugated tube
Clamp
Clamp
Clamp
Clip
Bolt
Protector
Steering friction assy

Part No.
63D-24367-00
63D-48538-00
67G-26301-10
67G-48321-20
68V-42725-10
6G5-83557-00
6K3-83557-00
6X4-24364-00
6X4-42121-11
6X4-82586-20
90116-10175
90185-10051
90447-22007
90464-09M42
90465-13M24
90465-13M30
90468-10005
97595-06516
6X4-42735-00
67G-42508-10

Qty
1
2
1
1
1
1
1
1
1
1
2
4
1
1
5
1
2
2
1
1

Remarks

895 mm (35 in.)

965 mm (40 in.)
85 mm (3.3 in.)
65 mm (2.6 in.)
92 mm (Long)
1250 mm (49 in.)
M10-40 mm
M10
230 mm (9.1 in.)

4-3

6X4 MULTI-FUNCTION TILLER HANDLE

F75, F90
KIT P/N:6X4-42102-10
Part name
Fuel pipe clamp 2
Cable clamp
Throttle cable
Shift cable
Grommet 2
Corrugated tube
Corrugated tube
Stay
Ext. bracket
Troll RPM switch assy
10-pin main harness
Stud bolt
Lock nut
Corrugated tube
Clamp
Clamp
Clamp
Clip
Bolt
Protector
Steering friction assy

Part No.
63D-24367-00
63D-48538-00
67G-26301-10
67G-48321-20
68V-42725-10
6G5-83557-00
6K3-83557-00
6X4-24364-00
6X4-42121-00-4D
6X4-81860-00
6X4-82586-20
90116-10031
90185-10051
90447-22007
90464-09M42
90465-13M24
90465-13M30
90468-10005
97595-06516
6X4-42735-00
67G-42508-10

Qty
1
2
1
1
1
1
1
1
1
1
1
2
2
1
1
5
1
2
2
1
1

Remarks

895 mm (35 in.)

965 mm (40 in.)
85 mm (3.3 in.)
65 mm (2.6 in.)
45 mm (Short)
1250 mm (49 in.)
M10-70 mm
M10
230 mm (9.1 in.)

F50, T50, F60, T60, F70A

KIT P/N:6X4-42102-22
Part name
Cable clamp 2
Shift cable
Throttle cable
Troll RPM switch assy
10-pin main harness
Lock nut
Clamp
Clamp
Clip
Steering friction assy

Part No.
63D-48538-00
67C-48321-11
69W-26301-00
6X4-81860-00
6X4-82586-10
90185-10051
90464-09M42
90465-13M36
90468-10005
6C5-42508-00

Qty
2
1
1
1
1
2
1
1
2
1

Remarks
707 mm (28 in.)
610 mm (24 in.)
950 mm (37 in.)

4-4

6X4 MULTI-FUNCTION TILLER HANDLE

F40A
KIT P/N:6X4-42102-70
Part name
Steering friction assy
Lock nut
Shift cable
Clamp
Cable clamp
Throttle cable
Clamp
10-pin main harness
Troll RPM switch assy
Clamp

Part No.
67C-42508-03
90185-10051
67C-48321-11
90468-10005
63D-48538-00
69W-26301-00
90464-09M42
6X4-82586-10
6X4-81860-00
90465-13M36

Qty
1
2
1
2
2
1
1
1
1
1

Part No.
63D-48538-00
6H1-26301-01
6H1-48321-11
6X4-42121-00-4D
6X4-44159-10-4D
6X4-44173-00
97780-60920
90386-26MA3
6X4-82586-30
90116-10031
90464-09M42
90464-15M11
90465-13M36
90468-10005
97595-08540
692-42508-01

Qty
2
1
1
1
1
1
2
1
1
2
1
1
2
2
1
1

Remarks
M10
687 mm (27 in.)

610 mm (24 in.)

950 mm (37 in.)

90
KIT P/N:6X4-42102-41
Part name
Cable clamp
Throttle cable
Shift cable
Ext. bracket
Shift handle
Shift lever
Screw
Bush
10-pin main harness
Stud bolt
Clamp
Clamp
Clamp
Clip
Bolt
Steering friction assy

Remarks
610 mm (24 in.)
726 mm (29 in.)
45 mm (Short)

Short type (exclusive), To replace original lever

700 mm (26 in.)

M10-70 mm

Shaft type

4-5

6X4 MULTI-FUNCTION TILLER HANDLE

70
KIT P/N:6X4-42102-51
Part name
Throttle cable
Shift cable
Cable clamp
Grommet 2
Ext. bracket
10-pin main harness
Stud bolt
Lock nut
Clamp
Clamp
Clip
Steering friction assy

Part No.
6H3-26301-01
6H3-48321-11
63D-48538-00
6H3-42725-30
6X4-42121-00-4D
6X4-82586-30
90116-10031
90185-10051
90464-09M42
90465-13M36
90468-10005
692-42508-01

Qty
1
1
2
1
1
1
2
2
1
2
2
1

Part No.
63D-24364-10
63D-24367-00
63D-26301-01
63D-48321-11
63D-48538-00
63D-82361-00
6X4-82586-00
90161-06M00
90185-10051
90387-06M26
90464-09M42
90465-13M36
90468-10005
97595-06416
97595-06516
97595-06535
63D-42508-00

Qty
1
1
1
1
2
1
1
1
2
1
1
2
2
2
1
1
1

Remarks
530 mm (21 in.)
610 mm (24 in.)

45 mm (short)
600 mm (24 in.)
M10-70 mm
M10

Shaft type

50
KIT P/N:6X4-42102-61
Part name
Stay
Fuel pipe clamp 2
Throttle cable
Shift cable
Clamp
Clamp
10-pin main harness
Screw
Lock nut
Collar
Clamp
Clamp
Clip
Bolt
Bolt
Bolt
Steering friction assy

Remarks

530 mm (21 in.)

610 mm (24 in.)

700 mm (26 in.)

M6-25 mm
M10

4-6

6X4 MULTI-FUNCTION TILLER HANDLE

WIRING DIAGRAM (FOR US)
Tachometer
6Y5-8350T-90
TACH
5
4

x100
r/min

2
1

set

G/R

6Y5-83653-00 (5 m)

G/R

G/W

mode

R
R

6Y5-83553-M0 (2.5 m)

Stop
SW

Ignition
SW

PTT
SW

Tiller handle area

To
ENGINE

(*2)
B
R

B
R
R
Y
Y
G

Y
G

Neutral
SW

Br
Br
Y

W
Sb
X

W/L

P
Br

G
Lg

Sb
W

B
P

W
Br

Buzzer

R
Sb
Lg

O/W

(*1) For fuel injected F40-F90.

(*2) 1.5 m (5 ft) extension wire-harness (6Y5-8356N-00) is available.

1.5 m (5 ft)

4-7

R
Sb
Lg

Troll
RPM
SW
(*1)

6X4 MULTI-FUNCTION TILLER HANDLE

EXPLODED DIAGRAM (FOR US)
EX: F50/F60/F70A

4-8

6X4 MULTI-FUNCTION TILLER HANDLE

MULTI-FUNCTION TILLER HANDLE KIT (FOR JAPAN)
The tiller handle kit is prepared for F50 to F90.
For installation procedure, see the instruction supplied with the kit.
Troll RPM switch
(Fuel injected F30-F90)

LED indicators
* Overheat warning
* Oil warning

PTT switch (Side)

TILLER HANDLE KIT CONTENTS

F80B, F90B
KIT P/N:6X4-42103-11
Part name
Pipe 1
Grommet
Corrugated tube
Corrugated tube
Stay
Tiller handle assy
Ext. bracket
Stud bolt
Lock nut
Corrugated tube
Clamp
Clamp
Bolt
Fuel pipe clamp
Protector
Steering friction assy
Setup manual

Part No.
67G-42541-00
68V-42725-10
6G5-83557-00
6K3-83557-00
6X4-24364-00
6X4-42101-32
6X4-42121-00-4D
90116-10031
90185-10051
90447-22007
90465-13M24
90465-13M30
97595-06516
63D-24367-00
6X4-42735-00
67G-42508-10
6X4-2819K-01

Qty
1
1
1
1
1
1
1
2
2
1
5
1
2
1
1
1
1

Remarks

85 mm (3.3 in.)
65 mm (2.6 in.)
With PTT switch (Side), LED indicators
45 mm (Short)
M10-70 mm
M10
230 mm (9.1 in.)

Japanese

F50F, FT50G, F60C, FT60D, F70A

KIT P/N:6X4-42103-23
Part name
Grommet 2
Tiller handle assy
Lock nut
Clamp
Steering friction assy
Setup manual

Part No.
6C5-42725-30
6X4-42101-V3
90185-10051
90465-13M36
6C5-42508-00
6X4-2819K-01

Qty
1
1
2
1
1
1

Remarks
With PTT switch (Side), LED indicators
M10

Japanese

4-9

6X4 MULTI-FUNCTION TILLER HANDLE

FT50C,F50D
KIT P/N:6X4-42103-42
Part name
Grommet 2
Tiller handle assy
Lock nut
Clamp
Setup manual

Part No.
62Y-42725-30
6X4-42101-43
90185-10051
90465-13M36
6X4-2819K-01

Qty
1
1
2
1
1

Remarks
With PTT switch (Side), LED indicators
M10
Japanese

WIRING DIAGRAM (FOR JAPAN)

Stop
SW

Warning
indicators

Tiller handle area

G/R

P/W

P/B

Ignition
SW

PTT
SW

Troll
RPM
SW
(*1)

Neutral
SW

Br
Br

To
ENGINE

W
Sb
X
B

P
Br

W
P

W
Br

P
Y

W/L

Buzzer

R
Sb
Lg

O/W

(*1) For fuel injected F30-F90.

4-10

6X4 MULTI-FUNCTION TILLER HANDLE

EXPLODED DIAGRAM (FOR JAPAN)
EX: F50/F60/F70A

4-11

6X4 MULTI-FUNCTION TILLER HANDLE

MULTI-FUNCTION TILLER HANDLE CONTENTS (FOR OTHERS)
The tiller handle kit is not prepared for other market, except some region.
Regarding the tiller handle component parts information, see the applicable years model parts catalog.
Troll RPM switch
(Fuel injected F30-F100)

LED indicators
* Overheat warning
* Oil warning
PTT switch (Top)

TILLER HANDLE GROMMET DESCRIPTION

Warning indicator lead
10-pin main harness
Troll RPM switch
Throttle cable
Shift cable
Immobilizer harness

4-12

6X4 MULTI-FUNCTION TILLER HANDLE

MULTI-FUNCTION TILLER HANDLE KIT (FOR EU & ANZ)
Both tiller handle kit and fitting kit are required for installation.
TILLER HANDLE KIT CONTENTS
F30 F115
KIT P/N:6X4-42103-61
Part name
Tiller handle assy
Setup manual

Part No.
6BC-42101-21
6X4-2819K-K5

Qty
1
1

Remarks
w/o troll rpm SW. Required fitting kit.
English, French, Spanish

Part No.
90185-10051
67C-48321-11
63D-48538-00
90468-10005
69W-26301-00
90464-09M42
6X4-82586-10
6X4-81860-00
90465-13M36
67C-42508-04
6X4-83653-20
6X4-42728-00

Qty
2
1
2
2
1
1
1
1
1
1
1
1

Remarks

Part No.
90185-10051
67C-48321-11
63D-48538-00
90468-10005
69W-26301-00
90464-09M42
6X4-82586-10
6X4-81860-00
90465-13M36
6C5-42508-01
6X4-83653-20
6X4-42728-00

Qty
2
1
2
2
1
1
1
1
1
1
1
1

HANDLE FITTING KIT CONTENTS

F30 F40
KIT P/N: 6X4-42102-80
Part name
Nut
Shift cable
Clamp
Clip
Throttle cable
Clamp
Wire harness
Troll rpm SW assy
Clamp
STR friction assy
Wire lead
Cap

L=700 mm
For PTT SW

F50 F70
KIT P/N: 6X4-42102-90
Part name
Nut
Shift cable
Clamp
Clip
Throttle cable
Clamp
Wire harness
Troll rpm SW assy
Clamp
STR friction assy
Wire lead
Cap

Remarks

L=700 mm
For PTT SW

4-13

6X4 MULTI-FUNCTION TILLER HANDLE

MULTI-FUNCTION TILLER HANDLE KIT (FOR EU & ANZ)
HANDLE FITTING KIT CONTENTS
F80 F100
KIT P/N: 6X4-42102-A0
Part name
Grommet
Bracket
Nut
Stud bolt
Shift cable
Cable clamp
Clip
Throttle cable
Clamp
Wire harness
Troll rpm SW assy
STR friction assy
Tube
Tube
Tube
Protector
Clamp
Stay
Bolt
Clamp
Clamp
Wire lead

Part No.
68V-42725-10
6X4-42121-00
90185-10051
90116-10031
67G-48321-20
63D-48538-00
90468-10005
67G-26301-10
90464-09M42
6X4-82586-20
6X4-81860-00
67G-42508-10
90447-22007
6G5-83557-00
6K3-83557-00
6X4-42735-00
63D-24367-00
6X4-24364-00
97595-06516
90465-13M24
90465-13M30
6X4-83653-00

Qty
1
1
2
2
1
2
2
1
1
1
1
1
1
1
1
1
1
1
2
5
1
1

Part No.
68V-42725-10
6X4-42121-11
90116-10175
90185-10051
67G-48321-20
63D-48538-00
90468-10005
67G-26301-10
90464-09M42
6X4-82586-20
67G-42508-10
90447-22007
6G5-83557-00
6K3-83557-00
6X4-42735-00
63D-24367-00
6X4-24364-00
97595-06516
90465-13M24
90465-13M30
6X4-83653-00

Qty
1
1
2
4
1
2
2
1
1
1
1
1
1
1
1
1
1
2
5
1
1

Remarks

L=1250 mm

F115
KIT P/N: 6X4-42102-B0
Part name
Grommet
Bracket
Stud bolt
Nut
Shift cable
Cable clamp
Clip
Throttle cable
Clamp
Wire harness
STR friction assy
Tube
Tube
Tube
Protector
Clamp
Stay
Bolt
Clamp
Clamp
Wire lead

Remarks

L=1250 mm

4-14

6X4 MULTI-FUNCTION TILLER HANDLE

HANDLE IMMOBILIZER KIT CONTENTS
F30B F115A
KIT P/N: 6Y8-W0035-C0
Part name
Wire-harness
Single hub
Wire-lead
Pigtail bus wire
Main bus wire

Part No.
6Y5-83553-M0
6Y8-81920-11
6Y8-82117-00
6Y8-82521-51
6Y8-82553-01

Qty
1
2
1
1
1

Remarks
2.5 m
For system PWR
3.6 m
0.3 m

* Requires to replace the rigging grommet as follows.

F50 up to F60: 6C5-42725-50
F75 up to F115: 68V-42725-20

4-15

STEERING FRICTION CONTENTS

For detail installation information, see the instruction manual packed in the tiller handle kit and/or
the steering friction kit.

M10 lock nut

M6 bolt
M5 bolt

General torque table

Nm
4
8
5

kgfm
0.4
0.8
0.5

lbft
3
6
4

Global model
US model
Canada model

6AH-42508-01 (for manual tilt)

6AH-42508-11 (for power tilt)
F9.9H F15C F20B F20C
F15A F20A
F15A F20A

Part No.
Global model
US model
Canada model

65W-42508-00
F25D FT25F
F25A T25A
F25A T25A

Part No.
Global model
US model
Canada model

Part No.

F30B
F30A

F8C
F8A
F8A

67C-42508-04
F40F
F40A
F40A

68T-42508-02
FT8D
T8A

3 N m, 0.3 kgf m, 2.2 lb ft

To be continued.
4-16

STEERING FRICTION CONTENTS

Part No.
Global model
US model
Canada model

40V

63D-42508-00
50H FT50C F50D

Part No.
Global model
US model
Canada model

F40D

6C5-42508-01
F50F FT50G F60C FT60D
F50
T50
F60
T60
F50A T50A F60A T60A

18 N m,
1.8 kgf m,
13 lb ft

20 N m,
2.0 kgf m,
15 lb ft

Part No.
Global model
US model
Canada model
Global model
US model
Canada model

20 N m,
2.0 kgf m,
15 lb ft

F75B
F75
F75A
F80C

Part No.
Global model
US model
Canada model

67G-42508-10
F80B F90B F100D F75C
F90
F90A
F95A F100B F/FL115A
F/LF115A
F/LF115A

18 N m,
1.8 kgf m,
13 lb ft

Use this hole for F115A,

F100B, F95A, F75C and F80C

1/4 turns out

from seated
position

18 N m,
1.8 kgf m,
13 lb ft

4-17

60F

692-42508-01
70B
75C
90A
90

MEMO

CONVENTIONAL GAUGE (6Y5 & 6Y7)

MOUNTING THE METERS....................................................................... 5-4

METER MOUNTING PROCEDURE..................................................... 5-4
ANALOG GAUGE ILLUMINATION (6Y7 TYPE) .................................. 5-4
ANALOG TACHOMETER ........................................................................ 5-5
ANALOG TACHOMETER APPLICATIONS ......................................... 5-5
ANALOG TACHOMETER DIMENSIONS............................................. 5-6
POLE NUMBER SET UP...................................................................... 5-6
DIGITAL TACHOMETER.......................................................................... 5-7
DIGITAL TACHOMETER APPLICATIONS .......................................... 5-7
DIGITAL TACHOMETER DIMENSIONS.............................................. 5-7
POLE NUMBER SET UP...................................................................... 5-8
SPEEDOMETER....................................................................................... 5-9
SPEEDOMETER APPLICATIONS ....................................................... 5-9
SPEEDOMETER DIMENSIONS ........................................................ 5-10
WATER PRESSURE DAMPER (OP) ................................................. 5-10
SPEEDOMETER TUBE ROUTING .................................................... 5-11
DIGITAL SPEEDOMETER SET UP ................................................... 5-11
FUEL MANAGEMENT GAUGE.............................................................. 5-12
FUEL MANAGEMENT GAUGE APPLICATIONS............................... 5-12
FUEL MANAGEMENT GAUGE DIMENSIONS .................................. 5-13
FUEL SENSOR INSTALLATION........................................................ 5-14
WIRING DESCRIPTION..................................................................... 5-15
FUEL MANAGEMENT GAUGE SET UP............................................ 5-17
FUEL MGT GAUGE WITH SPEEDOMETER SET UP....................... 5-17
ANALOG TRIM METER ......................................................................... 5-18
ANALOG TRIM METER APPLICATIONS .......................................... 5-18
ANALOG TRIM METER DIMENSIONS.............................................. 5-18
TRIM SENSOR ADJUSTMENT.......................................................... 5-18
COOLANT PRESSURE METER ............................................................ 5-19
COOLANT PRESSURE METER APPLICATIONS............................. 5-19
COOLANT PRESSURE METER DIMENSIONS ................................ 5-19
COOLANT PRESS. ATTACHMENT INSTALLATION ........................ 5-19
To be continued.

5-1

CONVENTIONAL GAUGE (6Y5 & 6Y7)

COOLANT TEMP. METER ..................................................................... 5-20

COOLANT TEMP. METER APPLICATIONS...................................... 5-20
COOLANT TEMP. METER DIMENSIONS ......................................... 5-20
COOLANT PRESS. ATTACHMENT AND/OR COOLANT TEMP.
SENSOR INSTALLATION (FOR 2-STROKE MODELS) ............... 5-21
ROUTING COOLANT TEMP. LEAD .................................................. 5-21
ROUTING THE COOLANT PRESS. TUBE........................................ 5-22
COOLANT PRESS. ATTACHMENT AND/OR COOLANT TEMP.
SENSOR INSTALLATION (FOR 4-STROKE MODELS) ............... 5-22
ROUTING THE COOLANT TEMP. LEAD &
COOLANT PRESS. TUBE ............................................................. 5-24
SENSOR/ ATTACHMENT INSTALLATION AND ROUTING ............. 5-24
HOUR METER ........................................................................................ 5-25
HOUR METER APPLICATIONS ........................................................ 5-25
HOUR METER DIMENSIONS............................................................ 5-25
WIRING THE MECHANICAL HOUR METER .................................... 5-26
WIRING THE DIGITAL HOUR METER .............................................. 5-26
VOLTAGE METER ................................................................................. 5-27
VOLTAGE METER APPLICATIONS .................................................. 5-27
VOLTAGE METER DIMENSIONS ..................................................... 5-27
WIRING THE VOLTAGE METER....................................................... 5-27
FUEL METER ......................................................................................... 5-28
FUEL METER APPLICATIONS.......................................................... 5-28
FUEL METER DIMENSIONS ............................................................. 5-28
WIRING THE FUEL METER .............................................................. 5-28
CHARGE WARNING UNIT..................................................................... 5-29
CHARGE WARNING UNIT APPLICATIONS ..................................... 5-29
WIRING THE CHARGE WARNING UNIT .......................................... 5-29
To be continued.

5-2

CONVENTIONAL GAUGE (6Y5 & 6Y7)

WIRE HARNESSES................................................................................ 5-30

REMOTE-OIL TANK HARNESS ........................................................ 5-30
ADDITIONAL ACCESSORY LEAD .................................................... 5-30
METER HARNESS............................................................................. 5-31
LAMP SWITCH................................................................................... 5-32
COMBINATION TRIM AND OIL LEAD 1............................................ 5-32
COMBINATION TRIM AND OIL LEAD 2............................................ 5-32
TRIM METER LEAD ........................................................................... 5-32
PT/T SWITCH LEAD EXTENSION..................................................... 5-33
TRIM AND OIL LEAD ......................................................................... 5-33
CONVERSION HARNESS 1 .............................................................. 5-33
FUEL MANAGEMENT GAUGE HARNESS ....................................... 5-33
LIGHTING COIL EXTENSION HARNESS ......................................... 5-33
RECTIFIER KIT .................................................................................. 5-33
WIRING DIAGRAMS .............................................................................. 5-34
WIRE COLOR CODE ......................................................................... 5-34
DIGITAL METER ................................................................................ 5-35
ANALOG METER (6Y7) ..................................................................... 5-40
INTERCHANGEABILITY BETWEEN TACHOMETER
AND ENGINE................................................................................. 5-42
RIGGING GROMMET DESCRIPTION ................................................... 5-45

5-3

MOUNTING THE METERS

The meters can be installed with an electrical start model because power source is required for its
operation.

METER MOUNTING PROCEDURE

Follow the procedures below for mounting the gauges.
1. Select a mounting location so that the meter is easy to read from the operating position.
Be sure that there is sufficient clearance behind the panel for the meter.
For analog meters, be sure that the angle for mounting the meter is 65 to 90 degrees.
If the analog gauge is mounted onto horizontal surface, the pointer may not return to the zero position after the engine has stopped.
2. Make a hole in the desired position.
3. Remove the fitting plate from the meter, fit the meter into the panel, and install the fitting plate
over the mounting studs.
4. Place the washers over the studs, and then evenly tighten the mounting nuts until the meter can
no longer be rotated by hand.
5. Connect the wire-harnesses to the gauges, and secure them into a boat.

65 90
[Analog meter]

Gasket

Fitting plate
Panel
thickness

Wave washer
Nut

Cutting area
(for thicker panel)
Mounting stud

* If the gauge is mounted onto 13 mm (0.5 in) or thicker board, cut out the fitting plate end so that the mount
nut is enough tightened.

ANALOG GAUGE ILLUMINATION (6Y7 TYPE)

For black-face analog gauge, the faceplate illuminated with permeation light for nighttime operation.
The white-face analog gauge used an indirect clear lighting.

5-4

ANALOG TACHOMETER
A tachometer is essential for suitable outboard performance.
The engine speed can be monitored for most efficient operation.
In twin motors applications, the tachometers can be used to set the throttle of each engine accurately.

ANALOG TACHOMETER APPLICATIONS

Ref. No.
1

Description
Without indicators
BLK panel
Without indicators
WHT panel
With 3 oil indicators
BLK panel
With 3 oil indicators
WHT panel
With overheat & oil indicators
BLK panel
With overheat & oil indicators
WHT panel

Part No.
6Y7-83540-20
6Y7-83540-30

Applicable model
Pre-mixed 9.9 225
FT8 (T8), F9.9 F25 (FT/T25)

6Y7-83540-00
250G, L250G
6Y7-83540-10
6Y7-83540-80
6Y7-83540-90

Above 40 (3-cyl) w/ oil injection (except 250G/

L250G)
Above F30 [Mechanical RC]

* Tachometer with triple oil indicators (Ref. No.2) requires the relay to light the indicators.
See the wiring-diagram to connect the relay (P/N: 6Y5-81950-02).
* If the current tachometer does not fit the older engine, use the wire-harness adapter which is shown in page
5-42.

5-5

ANALOG TACHOMETER
ANALOG TACHOMETER DIMENSIONS
3-indicator for 250G & L250G

2-indicator for 4-stroke and oil injected

2-stroke engines (except 250G & L250G)
mm (in.)

mm (in.)

200 (7.87)

93 (3.66)

R G

11.2 (0.44)

65 (2.56)

11.2 (0.44)

28.9 (1.14)

Br
B

65 (2.56)

210 (8.27)

93 (3.66)

84.5 (3.33)

200 (7.87)

84.5 (3.33)

200 (7.87)

28.9 (1.14)

POLE NUMBER SET UP

Yamaha tachometer shows the engine RPM by receiving the pulse signal from lighting coil.
The flywheel magneto used on Yamaha outboard motors varies in number of poles used: 4-pole, 6pole and 12-pole.
It is necessary to adjust the calibration switch on the back of gauge to correspond to the particular
motor being used.
The initial setting is 12-pole. Adjust if necessary.
Description
4-pole
6-pole
12-pole

Applicable model
6 15, 55B, E/40G, E/40J, E48C, E55C, EK40G, EK40J
20D (20), 25N (25), 30D, 40V, 50H (50), 60F
70B, E/25B, EK25B, E/30H, E/40X, E60H, F8C (F8A), FT8D (T8A), F9.9F (F9.9A)
55D, 75A, 75C, 85A, 90A (90), V4, V6, E60J, E65A, E75B, F15 [6AG] F250 (*1)
(*1) Mechanical RC

POLE NUMBER ADJUSTMENT

1. Remove the rubber grommet (1) from the back
of meter.
2. Turn the rotating switch (2) with a slotted-head
screwdriver to the required position.
3. Reinstall the grommet.

5-6

DIGITAL TACHOMETER
A tachometer is essential for suitable outboard performance.
The engine speed can be monitored for most efficient operation.
In dual-engine applications, the tachometers can be used to set the throttle of each engine accurately.
The digital tachometer includes the elapsed hour meter, the trim meter and the oil warning indicator.
Also, this meter can be used for both 2 and 4 stroke models by the switch settings.

2
TACH

TACH
5
x100
r/min

x100
r/min

set

mode

set

mode

DIGITAL TACHOMETER APPLICATIONS

Ref. No.
1

Description
Multifunction
Multifunction w/o Check engine
and Water in fuel indicators

Part No.
6Y5-8350T-04

Applicable model
250G,L250G
Above 40 (3-cyl) w/ oil injection & PTT (except
250G/L250G), Above F30 w/ PTT (*1)

6Y5-8350T-91

(*1) Mechanical RC

* If the current tachometer does not fit the older engine, use the wire-harness adapter which is shown in page
5-42.

DIGITAL TACHOMETER DIMENSIONS

1. With twin 4-pin couplers

2. With single 4-pin coupler

65.5 (2.58)
8.5 (0.33)

25 (0.98)

mm (in.)

84.5 (3.33)

97 (3.82)

210 (8.27)

97 (3.82)

84.5 (3.33)

mm (in.)

W L
R
W
G G
W
R

P Gy
G

190 (7.48)
210 (8.27)

Or B W
Gy P

65.5 (2.58)
8.5 (0.33)

5-7

25 (0.98)

DIGITAL TACHOMETER
POLE NUMBER SET UP
The tachometer indicates the engine speed by receiving the pulses from the lighting coil.
The flywheel magnets used in Yamaha outboards vary in number of poles used: 6-pole and 12-pole.
It is necessary to change the calibration switch on the back of the meter to correspond to the particular motor being used.
Also, the selection of the engine type and the trim sensor type is required.
Description
6-pole
12-pole

Applicable model
40V, 50H (50), 60F, 70B
75C, 90A (90), V4, V6, F30 F250 [Mechanical RC]

POLE NUMBER ADJUSTMENT

1. Remove the rubber grommet from the back the meter.
2. Set the toggle dipswitches on the chart as shown.
3. Reinstall the grommet.
No.

SW.1

Dipswitch Trim senfunction

sor type

ON
OFF
SW.1

SW.2

SW.3

* The switch position in the illustration shows the initial setting.

5-8

SW.2

SW.3

Generator type

Engine
type

2 lead

6-pole

4-stroke

OFF

3 lead

12-pole

2-stroke

SPEEDOMETER
The speedometer indicates an approximate speed of the boat through the water by measuring the
impact force of the water with a pressure gauge.
This impact force will vary with the density of the water and the speed of the impact.
The density can be vary by the purity of the water and the temperature of water.
The speed of water impact can vary by the location of the speed sensor and its relation to the water
flow off the area of the boat in front of the sensor.
Because of these variables, the true speed of a boat can vary from the indicated speed on the
meter.
Especially, the digital speedometer uses LCD readouts for speed, clock, trip distance, fuel tank
level, and warning information for low fuel level and abnormal battery voltage.
The speed can be calibrated for mph, km/h, and knots.

SPEED
km/h
knot
mph
km
mile
TRIP

TIME

set

BATT

mode

SPEEDOMETER APPLICATIONS
Ref. No.
1

Description
Digital multifunction

Part No.
6Y5-83570-S6
6Y5-83500-30

Analog, BLK panel

0 75 mph (20 120 km/h)
Analog, WHT panel
0 75 mph (20 120 km/h)
Analog, BLK panel
0 50 mph (20 80 km/h)
Analog, WHT panel
0 50 mph (20 80 km/h)
Analog, BLK panel
0 120 km/h (15 65 knot)
Analog, WHT panel
0 120 km/h (15 65 knot)
Analog, BLK panel
0 80 km/h (10 43 knot)
Analog, WHT panel
0 80 km/h (10 43 knot)

Applicable model
Above 40 (3-cyl)
Above F30 [Mechanical RC]
For Yamaha manufactured boats (Japan)

6Y7-83510-00
6Y7-83510-10
6Y7-83510-20
6Y7-83510-30
6Y7-83510-40
6Y7-83510-50
6Y7-83510-60
6Y7-83510-70

5-9

Above 40 (3-cyl)
Above F30 [Mechanical RC]

SPEEDOMETER
SPEEDOMETER DIMENSIONS
Digital

Analog
mm (in.)

8.5
(0.33)

65.5
(2.59)

11.2
(0.44)
210
(8.27)

84.5 (3.33)

93 (3.66)

97 (3.82)

84.5 (3.33)

25 (0.98)

52
(2.05)

41.9
(1.65)

W B

* A 6 m (19.7 ft) water tube (P/N: 688-83557-00) is included with all speedometer units, (except digital speedometer unit P/N: 6Y5-83570-S5).

WATER PRESSURE DAMPER (OP)

Installing the water pressure damper between the gauge and water tube is recommended under following condition.
The pointer of analog gauge is wiggled if water pressure pulsates.
To reduce a risk if water has leaked at connector end causing the gauge damage.

Water Tube
6Y5-83557-31

Clamp
90465-11M10

Water Pressure Damper

6Y5-83728-00

5-10

SPEEDOMETER

DIGITAL SPEEDOMETER SET UP

SPEEDOMETER TUBE ROUTING

1. Remove the rubber grommet from the back

the meter.
2. Set the toggle dipswitches on the chart as
below.
3. Reinstall the grommet.

1. Cut off about 3 mm (0.12 in.) from the end

of the nipple of the speedometer tube to
open it.

Cut off 3 mm
(0.12 in.)

3. Connect the tube to the nipple.

* The optional speed sensor (P/N: 688-8355601) is required if the speedometer tube is not
equipped to the clamp bracket area.
* In high-performance applications where the
engine has been mounted in an elevated
position, it may be necessary to use the
optional speed sensor to obtain a correct
reading.

ON
ON
km/h

OFF
ON
mph

OFF
OFF
knot/h

ON
OFF
OFF
ON
ON
OFF
Yamaha
ABYC
Europe
original
(US)
180 0
5 105 30 240

* The switch position in the illustration shows the

initial setting, which is the mph display and ABYC
fuel sensor.

(1) Optional speed sensor

5-11

FUEL MANAGEMENT GAUGE

The fuel management gauge has the functions as a fuel flow gauge, fuel consumption gauge, fuel
economy gauge, twin engine RPM synchronizer for dual installations, and an optional water separator warning indicator that detects water in the fuel filter.
The gauge can display by receiving data from the fuel flow sensor and either a NMEA 0183 compatible GPS unit or the digital speedometer.
* Fuel management gauge with speedometer does not have the function as twin engine RPM synchronizer,
water detection warning, and each engines fuel measurement.

1
FUEL MANAGEMENT

SPEED

FUEL

CPS

km/h
knots
mph
mile V
mpgph
km/l/h
BAT

l/h
gph

P S

TRIP
FLOW
ECOM
TTL

km/l
mpg

TTL

set

ECON SYNC

set

mode

FUEL MANAGEMENT GAUGE APPLICATIONS

Ref. No.
1
2

Description
Fuel mgt gauge kit 1
For single-engine
Fuel mgt gauge kit 2
For twin-engine
Fuel mgt gauge with speedometer

Part No.

Applicable model

6Y5-W0088-54
Above 115
Above F115 [Mechanical RC]

6Y5-W0088-65
6Y5-83500-40

FUEL MGT GAUGE KIT CONTENTS

Description

Part No.

Qty

Fuel mgt gauge

6Y5-83500-F2

Kit 1
1

Kit 2
1

3-prong connector

6Y5-87122-S0

EXT wire-harness
Fuel flow sensor
EXT wire-lead
Screw
Wire-lead
Installation manual

6Y5-83553-F1
6Y5-85752-02
6Y5-82117-00
90158-06003
703-82531-00
6Y5-2819K-F0

1
1
1
2

1
2
1
4
1
1

Remarks

Between digital speedometer and

fuel mgt gauge
8 m, 26 ft
30 cm, 1 ft (BLK)
70 cm, 2.3 ft (BLK)

ADDITIONAL PARTS REQUIREMENTS (FOR FUEL MGT w/ speedometer)

Description
Fuel flow sensor
EXT wire-harness
Screw

Part No.
6Y5-85752-02
6Y5-83553-F1
90158-06003

Qty
1
1
2

Remarks
8 m, 26 ft

OPTIONAL WIRE-HARNESS
Description
GPS signal lead

Part No.
6Y5-85721-F0

Remarks
To connect a NMEA0183 compatible GPS unit

5-12

FUEL MANAGEMENT GAUGE

FUEL MANAGEMENT GAUGE DIMENSIONS
Fuel management gauge (Ref. No. 1)

84.5 (3.33)
310 (12.2)

210 (8.27)

97 (3.82)

mm (in.)

65.5 (2.58)
8.5 (0.33)

25 (0.98)

R Y B L G G/W

Or
W/R

B Pu/W

Fuel mgt gauge with speedometer (Ref. No. 2)

84.5 (3.33)
310 (12.2)

210 (8.27)

97 (3.82)

mm (in.)

16.9 (0.66)
65.5 (2.58)
8.5 (0.33)

25 (0.98)

Or
Pu
R Y B L W B

B Pu/W

5-13

FUEL MANAGEMENT GAUGE

FUEL SENSOR INSTALLATION
Follow the notifications below.
1. Locate the sensor in a well ventilated area in boat between the engine and a water separator.
2. Place the sensor with the UP mark facing upward.
3. Use a fuel joint that is fitted to the fuel hose of the outboard motor.
4. Secure all fuel hose ends with a good quality hose clamp.
* For twin-application, refer to Wiring diagram in this chapter.
See the installation manual in the package for further information.

B ()

Nipple1/4-18NPT
(Market obtainable)

Or (+)

To extension wire lead

Pu (S)

Primer
bulb

Clamp

Water separator
(Market obtainable)

Fuel flow
sensor

Fuel valve
OUT

OUT

Clamp
Fuel tank

Inboard area

To extension wire lead if water detection switch is incorporated.

5-14

FUEL MANAGEMENT GAUGE

WIRING DESCRIPTION
Fuel management gauge
Be sure that both the fuel management gauge and speedometer yellow wires are connected to the
same power source and activated at the same time.

R: 12 volt
G: To the green wire from STBD digital tachometer
G/W: To the green wire from PORT digital tachometer for twin motor installations
B: To the ground
L: To the blue wire from digital speedometer
Y: To digital speedometer to the same power
source
Coupler A : To the extension wire lead for the
fuel flow sensor
Coupler B : To the digital speedometer or a
NMEA 0183 compatible GPS unit

R Y B L G G/W

Or
W/R

B Pu/W

Fuel mgt gauge with speedometer

The speed data is automatically picked up, therefore wiring to the speedometer is not needed.
R: 12 volt
W: To fuel level sensor (Fuel tank)
B: To the ground
L: To light switch
Y: To power source
Coupler A : To the extension wire lead for the
fuel flow sensor
Coupler C : To a NMEA 0183 compatible GPS
unit

Or
Pu
R Y B L W B

B Pu/W

5-15

FUEL MANAGEMENT GAUGE

CONNECTING TO THE DIGITAL SPEEDOMETER (FOR FUEL MANAGEMENT GAUGE)
This calculates the fuel economy and fuel consumption, inputting the speed data to the fuel management gauge from the digital speedometer.
1. Remove the black grommet in the back of the digital speedometer.
2. Install the 3-prong connector (P/N: 6Y5-87122-S0) to the digital speedometer.
3. Connect the 3-prong connector to the fuel management meter.
CONNECTING SPEEDOMETER TUBE
(FOR FUEL MGT GAUGE WITH SPEEDOMETER)
See the speedometer section.
CONNECTING TO A GPS
This is to input the speed data to the fuel management gauge (with speedometer) from a GPS unit.
1. Connect the optional signal lead (P/N: 6Y5-85721-F0) to a NMEA 0183 compatible GPS unit.
2. Connect the signal lead to the fuel management gauge.
3. Connect the ground lead for GPS and fuel management meter (with speedometer) to the same
ground.
Signal Lead for Speedometer

Signal Lead for GPS

(2)
B

3
2
1

W (+)

(1)

6Y5-87122-S0-00

Optional: 6Y5-85721-F0

(1) Grommet
(2) 3-prong connector

YAMAHA
SPEED
km/h
knot
mph
km
mile
TRIP

TIME

set

YAMAHA
FUEL MA
NAGEMENT

BATT

mode

Coupler B

l/h
gph

P S

km/l
mpg
TTL

Speedometer

set

ECON

GPS

NMEA0183

SYNC

mode

Fuel management gauge

If the speed signal is input from a GPS,
the speed pressure tube is not required.

Signal Lead for GPS

W (+)

Optional: 6Y5-85721-F0

SPEED
FUEL

CPS

km /h
kno ts
mp h
mile V
mpgph
km /l/h
BA T

TRIP
FLOW
ECOM
TTL

set

Coupler C

GPS

mode

Fuel mgt gauge with speedometer

5-16

NMEA0183

FUEL MANAGEMENT GAUGE

FUEL MANAGEMENT GAUGE SET UP
Follow the procedure below.
1. Remove the grommet (1) on the back of the meter.
2. Select the fuel measurement switch 4 for either gallons per hour (gph) or liters per hour (L/h).
3. Select the signal input switch 5 and 6 for either the digital speedometer or a GPS.
4. Set the compensator switch 1, 2 and 3 if there is a difference of fuel consumption between the
actual amount and meter reading.
For example:
Actual amount of fuel used: 50 gallons
Fuel management gauge indicates: 51 gallons
Different = + 1 gallon
1 gallon / 50 gallons = 0.02 or 2%

SW.1
SW.2
SW.3
Compensation

ON
ON
ON
4%

OFF
ON
ON
3%

ON
OFF
ON
2%

OFF
OFF
ON
1%

SW.4
Unit

OFF
L/h

ON
gph

SW.5
SW.6
Input source

OFF
ON
Speedometer

ON
OFF
GPS

ON
ON
OFF
0

OFF
ON
OFF
+1%

ON
OFF
OFF
+2%

OFF
OFF
OFF
+3%

FUEL MGT GAUGE WITH SPEEDOMETER SET UP

(1)

(2)

For 6 line switches (1), see the above instruction.

Switch 6 is not used.
For 4 line switches (2), see DIGITAL SPEEDOMETER SET UP on page 5-11.
5-17

ANALOG TRIM METER

The trim meter shows the trim angle of the outboard motor.

ANALOG TRIM METER APPLICATIONS

Ref. No.

Description
4-pin coupler
BLK panel

Part No.
6Y7-83670-00

Applicable model
Above premixed 40 (3-cyl) w/ PTT, 250G,
L250G
Above 40 (3-cyl) w/ oil injection & PTT (except
250G & L250G), Above F30 w/ PTT (*1), T25 (*2)
Using as a set with tachometer, 6Y7-83540-80

Bullet connector
BLK panel

6Y7-83670-40

4-pin coupler
WHT panel

6Y7-83670-20

Premixed 40 (3-cyl)-225 w/ PTT, 250G, L250G

Bullet connector
WHT panel

6Y7-83670-50

Above 40 (3-cyl) w/ oil injection & PTT (except

250G & L250G), Above F30 w/ PTT (*1), T25 (*2)
Using as a set with tachometer, 6Y7-83540-90
(*1) Mechanical RC
(*2) T25 for US/CA

ANALOG TRIM METER DIMENSIONS

With 4-pin coupler

With bullet connector

mm (in.)

mm (in.)
300 (11.8)

200 (7.87)

200 (7.87)
Y

60 (2.36)

200 (7.87)

B
B
x

B
B

46.6 (1.83)
11 (0.43)
13.7
(0.54)

52 (2.05)

46.6 (1.83)
11 (0.43)
13.7
(0.54)

52 (2.05)

TRIM SENSOR ADJUSTMENT

For a down position adjustment, loosen the trim sensor screw and make an adjustment so that the
needle aligns with the marking line indicating DOWN.

5-18

COOLANT PRESSURE METER

The coolant pressure meter shows the water pressure of cooling water passage, and provides a
warning for the operator when there is a problem with the cooling system.
* For all in-line cylinder models, the position for installing the sensor shares the coolant temperature output.
Therefore, either the coolant temperature meter or the coolant pressure meter can be used for one engine.
* However, on V4, V6, and F150 models, both meters can be used for one engine.

COOLANT PRESSURE METER APPLICATIONS

Ref. No.
1
2

Description
kPa, Black panel
kPa, White panel
psi, Black panel
psi, White panel

Part No.
6Y7-83660-00
6Y7-83660-20
6Y7-83660-10
6Y7-83660-30

Applicable model
Above 40 [3-cyl]
Above F25 (FT/T25) [Mechanical RC]

ADDITIONAL PARTS REQUIREMENTS

Description
Coolant pressure attachment

Part No.
688-83667-00

Remarks
With 10 m (32.8 ft) tube

COOLANT PRESSURE METER DIMENSIONS

52 (2.05)

60 (2.36)

mm (in.)

42 (1.65)
11 (0.43)

18.9 (0.74)

COOLANT PRESS. ATTACHMENT INSTALLATION

The method for installing the coolant pressure attachment is the same as the coolant temperature
sensor. See the installation instruction to the sensor in the coolant temperature meter on page 5-21.

To meter

M14 X 1.5

5-19

COOLANT TEMP. METER

The coolant temperature meter uses a sensor on the engine unit to indicate the temperature of the
cooling water inside the powerhead.
The meter has a red zone to indicate overheating so problems can be corrected before severe damage occurs.
* For all in-line cylinder models, the position for installing the sensor shares the coolant pressure output.
Therefore, either the coolant temperature meter or the coolant pressure meter can be used for one engine.
* However, on V4, V6, and F150 models, both meters can be used for one engine.

COOLANT TEMP. METER APPLICATIONS

Ref. No.
1
2

Description
Black panel
White panel

Part No.
6Y7-83590-00
6Y7-83590-10

Applicable model
Above 40 [3-cylinder]
Above F25 (FT/T25) [Mechanical RC]

ADDITIONAL PARTS REQUIREMENTS

Description
Coolant temp. sensor

Part No.
688-83591-00

Remarks
With 7 m (23 ft) leads

M14 X 1.5

Sb
B

COOLANT TEMP. METER DIMENSIONS

52 (2.05)

60 (2.36)

mm (in.)

46.6 (1.83)
11 (0.43)

13.79 (0.54)

5-20

COOLANT TEMP. METER

COOLANT PRESS. ATTACHMENT AND/OR COOLANT TEMP. SENSOR
INSTALLATION (FOR 2-STROKE MODELS)
V4, V6

Remove the screw plug (1) from the cylinder

head and install the sensor (2) with gasket.
After installing the sensor/ attachment, check
for water leakage.
[Sensor/ attachment (2): 20 Nm, 2.0 kgfm,
15 ftlb]
40V, 50H (50)

(2) Coolant temp. sensor

(1)
(2) Coolant press. attachment
(1)

(2)

NOTICE

(1)

Install the coolant pressure attachment on

the port side. If it is installed on the starboard side, the tube could cause a damage
by hard bending.

E48C, 55B
(1)

ROUTING COOLANT TEMP. LEAD

V4
(2)

60F, 70B
(1)

Through the
stopper base

(2)

Secure with
10-pin harness holder

V6 (2.6)

75C, 90A (90), 75A, 85A

(1)

(2)

Through the
stopper base

5-21

Secure with
10-pin harness
holder

COOLANT TEMP. METER

COOLANT PRESS. ATTACHMENT AND/

OR COOLANT TEMP. SENSOR
INSTALLATION
(FOR 4-STROKE MODELS)

ROUTING THE COOLANT PRESS.

TUBE
V4

F25D (F25A), FT25F (T25A), F30B (F30A),

F40F (F40A)

Same height
as oil tank

Add a clamp to
oil tank mount
bolt to secure
tube

Secure with
cable holder

Along port-side
bottom cowling

V6 (2.6)
Coolant temp. sensor

Same height
as oil tank

Coolant pressure attachment

FT50C, F50D

Add a clamp to
oil tank mount
bolt to secure
tube

Secure with
cable holder

Through
the stopper
base
Along port-side
bottom cowling

V6 (3.1)
Coolant temp. sensor, or
coolant pressure attachment

Same height as
thermostat cover

F95A, F100B, F115A

Through the
fuel filter
base

Through the
fuel pump
stopper base

Secure with
clamp

Secure with
cable holder

Secure with
fuel hose clamp

Coolant temp.
sensor, or
coolant pressure
attachment

5-22

COOLANT TEMP. METER

F75B (F75), F80B, F90B (F90), F100D, F75C,

F80C
Remove the negative battery cable and oil dipstick, then put a rag on the oil filler hole to
avoid dusts falling into the oil sump.

F40D, F50F (F50), FT50G (T50), F60C (F60),

FT60D (T60), F70A (F70A)
Only one of coolant press. attachment and
coolant temp. sensor can be installed, even if
the engine has two points for taking out it.

Coolant temp. sensor

Coolant pressure attachment

Coolant temp. sensor

Coolant press. attachment

5-23

COOLANT TEMP. METER

SENSOR/ ATTACHMENT
INSTALLATION AND ROUTING

F150

F200, F225, F250 [Mechanical RC]

w/ Variable Camshaft Timing

(1)
(1)
(2) Coolant temp.
sensor

Coolant press.
attachment

(2) Coolant press.

attachment

Coolant temp. lead

ROUTING THE COOLANT TEMP. LEAD

& COOLANT PRESS. TUBE
F150
Secure with clamp

Coolant press. tube

Coolant temp. lead

Coolant press. tube

Coolant temp. sensor

Water press. tube

Secure with clamp coolant temp. lead first

5-24

HOUR METER
The hour meter provides the operator with useful at-a-glance information.
It monitors the number of hours a motor has been used since original installation.
* The transaction of time count when the engine is stopped differs on each hour-meter and YDIS, therefore
the elapsed time is not always equal on their equipments.

HOUR METER APPLICATIONS

Ref. No.
1
2

Description
Mechanical
Digital, Black panel
Digital, White panel

Part No.
6Y5-83504-01
6Y7-83504-00
6Y7-83504-10

Applicable model
All electrical start models

HOUR METER DIMENSIONS

Mechanical

Digital

33 (1.3)

52 (2.05)

60 (2.36)

71.5 (2.81)

62 (2.44)

mm (in.)

52 (2.05)

mm (in.)

34.5 (1.36)

11 (0.43)

7.5 (0.3)

5-25

31.5 (1.24)

HOUR METER
WIRING THE MECHANICAL HOUR METER
The hour meter can be counted while the ignition switch is ON.
IG switch
Batt.+12V

Y
B
GND

B
L

Hour meter
Battery

Lamp switch

WIRING THE DIGITAL HOUR METER

Two counting method can be selected by connecting wires.

COUNTING TIME WHILE ENGINE IS RUNNING

COUNTING TIME WHILE IG SWITCH IS ON

IG switch

IG switch
Batt.+12V

GND

B
Y

Y
B

Positive Negative

Batt.+12V
GND

Positive Negative

Tach signal

Lighting Coil
(alternator)

Battery

Power signal
G

Hour meter

5-26

VOLTAGE METER
The voltage meter provides information about the charging condition of the battery.

VOLTAGE METER APPLICATIONS

Ref. No.
1
2

Description
DC 12 volts power supply
Black panel
DC 12 volts power supply
White panel

Part No.

Applicable model

6Y7-83503-00
All electrical start models
6Y7-83503-10

VOLTAGE METER DIMENSIONS

60 (2.36)

52 (2.05)

mm (in.)

46.6 (1.83)
13.7 (0.54)

11 (0.43)

WIRING THE VOLTAGE METER

IG switch
Batt.+12V

Y
Y
B

Lamp switch
B

B
L

Voltage meter
Battery

5-27

FUEL METER
The fuel meter indicates the amount of fuel remaining in the fuel tank.
However, the difference between the indication and actual remaining fuel may occur due to a fuel
tank shape, design, etc.

FUEL METER APPLICATIONS

Ref. No.
1

Description
For Yamaha sensor (5 105 )
Black panel
For ABYC sensor (30 240 )
Black panel
For Yamaha sensor (5 105 )
White panel
For ABYC sensor (30 240 )
White panel

Part No.

Applicable model

6Y7-85750-00
6Y7-85750-10
All electrical start models
6Y7-85750-20
6Y7-85750-30

FUEL METER DIMENSIONS

52 (2.05)

60 (2.36)

mm (in.)

46.6 (1.83)
13.7 (0.54)

11 (0.43)

WIRING THE FUEL METER

Lamp switch
L

B
W
W
Y

Fuel meter

IG
switch

Battery

Fuel sensor
(Yamaha, ABYC, others)

Fuel tank

5-28

CHARGE WARNING UNIT

The lamp of the charge warning unit indicates the status of charging the battery.
When the main switch is put into ON position, the red lamp lights.
After the engine starts, the lamp will go off.
If the charging system has malfunctioned, the lamp will light.
mm (in.)

7.7 (0.30)

84 (3.31)

R
G
B
G
Y

40 (1.57)

300 (11.81)

CHARGE WARNING UNIT APPLICATIONS

Description

Part No.
697-81901-60

Relay

Remarks
All electrical start models with a rectifier/regulator

ADDITIONAL PARTS REQUIREMENTS

Part No.
663-84301-01

Remarks
12V
mm (in.)

20 (0.79)

42 (1.65)

10 (0.39)

Description
Red lamp

R
G
500 (19.69)

WIRING THE CHARGE WARNING UNIT

Lamp
R

IG switch
Y

Relay
Charge warning unit

Lighting coil
Battery

5-29

WIRE HARNESSES

ADDITIONAL ACCESSORY LEAD

An optional wire harness for the instruments is

prepared. That will help any boats set up
instruments. Choose a suitable wire-harness if
necessary.
For the wire color description, see the table
on page 5-34.

Part No.
6Y5-82149-00
6Y5-82117-00
6R3-82521-80

Length (L)
30 cm (1 ft)
30 cm (1 ft)
30 cm (1 ft)
L

REMOTE-OIL TANK HARNESS

Part No.
6R3-85721-30
6R3-85721-50
6R3-85721-80

Length (L)
3 m (9.8 ft)
5 m (16.4 ft)
8 m (26.2 ft)

Remarks
Y

For V4, V6 oil injection model.

(L)

Part No.

Length (L)

703-82531-00

0.7 m (28 in)

B
(BLU)

Remarks
Blue
Black
Yellow

(BLU)

(L)

* On a model, 8 m wire harness is accompanied in

the engine crate.

5-30

Remarks
L/H model GND for
gauges

WIRE HARNESSES

For digital meter

Part No.
6Y5-83553-N0

METER HARNESS
For analog meter
Part No.
6Y5-83553-00
G
B
Y

Length (L)
2.5 m (8.2 ft)

Remarks

B
Y
L
G

Y
Y

R
G
B
Y

Length (L)
2.5 m (8.2 ft)

(10A)

Remarks
For twin application

Y (10A) Y

R
G
B
Y
L
B

(L)

(10A)
(L)

Part No.
6Y5-8350U-00

Length (L)
200 mm (8 in)

Part No.

Length (L)

6Y5-83553-M0

2.5 m (8.2 ft)

Remarks
R
G
B
Y

(10A)

Y (10A) Y

(L)

Part No.

Length (L)

6Y5-83553-10

5 m (16.7 ft)

Part No.
6Y5-83553-20
Remarks
For pre-mixed
model

G
B
B
Y

G
Y

Remarks
For single application

Length (L)
2.5 m (8.2 ft)

Y (10A) Y

R
G
B
Y
L

Remarks
L/H model

B
G
B
Y
L

(L)

Part No.
6Y5-8356N-00

G/R

Length (L)
1.5 m (5 ft)

G/R
B

(L)

5-31

Remarks
Extension harness

WIRE HARNESSES

COMBINATION TRIM AND OIL LEAD 2

LAMP SWITCH
Part No.
688-82520-00

Length (L)
10 cm (4 in)

Part No.
Length (L)
68F-82553-50
5 m (16.4 ft)
68F-82553-70
7 m (23 ft)
68F-82553-80
8 m (26.3 ft)
68F-82553-90
9 m (31.2 ft)
68F-82553-A0 10.5 m (32.8 ft)

Remarks
t = Max.15 mm

t
L
Y

Length (L)
10 cm (4 in)

250G, L250G

L/W

W/R

G/R

(TRIM)

(L)

Part No.
688-82526-00

Remarks

Remarks
t = Max.3 mm

t
L
(L)

Y
W/R

L/W

(TACH)
(L)

G/R

COMBINATION TRIM AND OIL LEAD 1

Part No.
64D-82553-50
64D-82553-70
64D-82553-80
64D-82553-90

Length (L)
5 m (16.4 ft)
7 m (23 ft)
8 m (26.3 ft)
9 m (31.2 ft)

TRIM METER LEAD

Remarks

Part No.
6R3-82553-30
6R3-82553-50
6R3-82553-70
6R3-82553-80
6R3-82553-90

250G, L250G

Length (L)
3 m (9.8 ft)
5 m (16.4 ft)
7 m (23 ft)
8 m (26.3 ft)
9 m (31.2 ft)

(L)
X

G/R

(TACH)
G/R

Premixed models
w/ PTT
(Flat type harness)

(L)

Remarks

(TRIM)
Gy

5-32

WIRE HARNESSES

FUEL MANAGEMENT GAUGE

HARNESS

PT/T SWITCH LEAD EXTENSION

Part No.
688-82586-11

Length (L)
2 m (6.6 ft)

Part No.
6Y5-83553-F1

Remarks

Length (L)
8 m (26 ft)

Remarks

Or/B

Pu/W

B
Or

Pu/W
B

Or/B

B
(L)

W/R

Pu
Or

Fuel sensor

TRIM AND OIL LEAD

Part No.
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50

Length (L)
5 m (16.4 ft)
6 m (19.8 ft)
7 m (23 ft)
8 m (26.3 ft)
9 m (31.2 ft)
10.5 m (32.8 ft)

W/R

Above F30 (*1),

Above 40 (3-cyl) w/
oil injection
(Unified 4-pin coupler)

Water detection SW (OP)

(L)

LIGHTING COIL EXTENSION HARNESS

(*1) Mechanical RC
P

G/R

Gauge

Remarks

G/R

Part No.

Length (L)

682-84380-00

6 m (19.8 ft)

G
(L)

(L)

RECTIFIER KIT

CONVERSION HARNESS 1
Part No.

Length (L)

6Y5-8350U-10

150 mm (6 in)

Remarks
To freeze trimgauge (*1) for hydrotilt model

Part No.

Length (L)

676-81970-01

2 m (6.6 ft)

(*1) For tachometer 6Y5-8350T-90

(L)
X

G/R

To tachometer

To
Lighting
coil

G
20A

300 mm
11.8 in

To EXT
wire-harness

5-33

Remarks
M-start model with
lighting coil

To GND

B
G/R
G

Remarks
M-start model with
lighting coil

To Direct
current
equipments

R
(L)

WIRING DIAGRAMS
Some representative wiring diagram samples for Yamaha genuine remote controls and instruments
are shown here. These diagrams will cover most common configurations.

WIRE COLOR CODE

The wiring color code and the main usage for the electric wires are shown as below.
The wire color and its main usage are difference between Yamaha standard and ABYC standard.
* For the wires which use tracer stripes, the main color is followed by a slash then the tracer color.
For example:
R/G = Red wire with a green tracer stripe
Pu/W = Purple wire with a white tracer stripe
Color
code
B
B/R
B/W
Br
Ch
Dg
G
G/R
G/W
Gy
L
Lg
Or
Or/B
P
Pu
Pu/W
R
Sb
V
W
W/R
X
Y
Y/R

Wire color
Black
Black/Red
Black/White
Brown
Chocolate
Dark green
Green
Green/Red
Green/White
Gray
Blue
Light green
Orange
Orange/Black
Pink
Purple
Purple/White
Red
Sky blue
Violet
White
White/Red
N/A
Yellow
Yellow/Red

Color sample

Main usage
Yamaha standard
ABYC standard
Ground, Battery ()
Ground
Remote-oil tank
Ignition coil primary
Neutral switch
Generator

Lighting coil 1 (tach signal 1)

Oil warning
Lighting coil 2 (tach signal 2)
Warning signal
Instrument light, Remote choke
Trim down

Tacho signal
Instrument light
Accessory feed

Overheat warning, Trim signal

ECM

Fuel sensor
Ignition

Battery (+)
Trim up

Battery (+)
Oil pressure

Engine stop switch

Pulser coil
Not used
Accessory feed
Diagnosis

Starting motor

5-34

Engine Oil Tank

Remote
Oil Tank

OUT

6R3-85721-30 (3 m)
-50 (5 m)
-80 (8 m)

6Y5-85752-02

(*2)

6Y5-83553-F1 (8 m)

Fuel tank

5-35
Speed hose (* 1)

688-82520-00

6Y5-83553-M0 (2.5 m)

68F-82553-50 (5 m)
-60 (6 m)
-70 (7 m)
-80 (8 m)
-90 (9 m)
-A0 (10.5 m)

(*1)

6Y5-85721-F0

6Y5-87122-S0

(* 1) Select either speedometer or GPS (NMEA0183)

If GPS is connected, speed tube is not required.
(* 2) Water separator (Market obtainable)

6Y5-8350T-03

TACH

SPEED

FUEL

(+)

NMEA
0183

GPS

WIRING DIAGRAMS

DIGITAL METER

SINGLE-MOTOR
250G

Remote
Oil Tank

OUT
IN

6Y5-83553-F1
(8 m)

Fuel tank

5-36
Speed hose (* 1)

688-82520-00

6Y5-83553-M0 (2.5 m)

(*2)

Speed hose (* 1)

SPEED/FUEL

GPS
NMEA
0183

6Y5-8350T-90

TACH

SPEED

FUEL

(+)

6Y5-85721-F0

(*1)

(+)

GPS
NMEA
0183

SINGLE-MOTOR w/ SIDE-MOUNT RC
Above 115 w/ oil injection (except 250G),
Above F115 (Mechanical RC)

6Y5-83653-00 (5 m)
-10 (6 m)
-20 (7 m)
-30 (8 m)
-40 (9 m)
-50 (10.5 m)

Engine
Oil Tank

2-stroke oil injection

6R3-85721-30 (3 m)
-50 (5 m)
-80 (8 m)

(* 1) Select either speedometer or GPS (NMEA0183)

If GPS is connected, speed tube is not required.
(* 2) Water separator (Market obtainable)

WIRING DIAGRAMS

DIGITAL METER

6Y5-85721-F0

6Y5-87122-S0

6Y5-85752-02

Engine
Oil Tank

Remote
Oil Tank

2-stroke oil injection

5-37

Speed hose (* 1)

SPEED/FUEL

Fuel tank

6Y5-83553-F1
(8 m)

(*2)

6Y5-83653-00 (5 m)
-10 (6 m)
-20 (7 m)
-30 (8 m)
-40 (9 m)
-50 (10.5 m)

Speed hose (* 1)

688-8258A-50 (5 m)
-60 (6 m)
-70 (7 m)
6K1-8258A-40 (8 m)
61B-8258A-00 (9.5 m)

OUT

6Y5-85752-02

6R3-85721-30 (3 m)
-50 (5 m)
-80 (8 m)

(* 1) Select either speedometer or GPS (NMEA0183)

If GPS is connected, speed tube is not required.
(* 2) Water separator (Market obtainable)

GPS
NMEA
0183

FUEL

6Y5-8350T-90

TACH

6Y5-85721-F0

(+)

6Y5-85721-F0

(*1)

SPEED

6Y5-87112-S0

6Y5-83553-N0
(2.5 m)

(+)

GPS

NMEA
0183

688-82520-00

WIRING DIAGRAMS

DIGITAL METER

SINGLE-MOTOR W/ BINNACLE RC
Above 115 w/ oil injection (except 250G),
Above F115 (Mechanical RC)

Engine
Oil Tank

Remote
Oil Tank

5-38
OUT

Speed hose (* 1)

OUT

Fuel tank

FUEL

TACH
6Y5-8350T-03

SPEED

6Y5-87112-S0

6Y5-83553-20
(2.5 m)

(+)

GPS

(*1)

TACH

6Y5-85721-F0

NMEA
0183

6Y5-83553-M0 (2.5 m)

(* 1) Select either speedometer or GPS (NMEA0183)

If GPS is connected, speed tube is not required.
(* 2) Water separator (Market obtainable)

688-8258A-50 (5 m)
-60 (6 m)
-70 (7 m)
6K1-8258A-40 (8 m)
61B-8258A-00 (9.5 m)

(*2)

6Y5-83553-F1
(8 m)

68F-82553-50 (5 m)
-60 (6 m)
-70 (7 m)
6Y5-85752-02
-80 (8 m)
-90 (9 m)
-A0 (10.5 m)

6R3-85721-30 (3 m)
-50 (5 m)
-80 (8 m)

688-82520-00

WIRING DIAGRAMS

DIGITAL METER

TWIN-MOTOR W/ BINNACLE RC
250G/L250G

Remote
Oil Tank

OUT

5-39
IN

Speed hose (* 1)

OUT

Fuel tank

688-8258A-50 (5 m)
-60 (6 m)
-70 (7 m)
6K1-8258A-40 (8 m)
61B-8258A-00 (9.5 m)

(*2)

6Y5-83553-F1
(8 m)

6Y5-83653-00 (5 m)
-10 (6 m)
-20 (7 m)
6Y5-85752-02
-30 (8 m)
-40 (9 m)
-50 (10.5 m)

Speed hose (* 1)

SPEED/FUEL

GPS
NMEA
0183

FUEL

6Y5-8350T-90

TACH

6Y5-85721-F0

(+)

6Y5-85721-F0

TACH

(*1)

SPEED

NMEA
0183
6Y5-87112-S0

6Y5-83553-N0 (2.5 m)
6Y5-83553-20
(2.5 m)

(+)

GPS

688-82520-00

TWIN-MOTOR W/ BINNACLE RC
Above 115 w/ oil injection
(except L/250G),
Above F115 (Mechanical RC)

Engine Oil Tank

2-stroke oil injection

Engine
Oil Tank

2-stroke oil injection

6R3-85721-30 (3 m)
-50 (5 m)
-80 (8 m)

(* 1) Select either speedometer or GPS (NMEA0183)

If GPS is connected, speed tube is not required.
(* 2) Water separator (Market obtainable)

WIRING DIAGRAMS

DIGITAL METER

6Y5-82521-00
6Y5-82149-00
6Y5-82117-00

Tachometer
without oil indicator

5-40

Thermo sensor

Fuel sensor

YAMAHA

Mechanical
hour meter

Engine is
running

Main switch is
ON

Digital hour meter

6Y5-83553-00 (2.5 m)

Voltage meter

Charge lamp

Speedometer

Trim meter

Water pressure
Charge
meter
warning unit

Tachometer
with oil indicator

2-STROKE ENGINES
L/250G &
Premixed
engines

Fuel meter

Fuse

64D-82553-50 (5 m)
-70 (7 m)
-80 (8 m)
-90 (9 m)

Relay Assy
6Y5-81950-02

ANALOG METER (6Y7)

Water temperature
meter

688-82520-00

Lamp switch

6Y5-83553-10

For pre-mixed
models

WIRING DIAGRAMS

5-41

6Y5-82521-00
6Y5-82149-00
6Y5-82117-00

Thermo sensor

Fuel sensor

YAMAHA

Engine is
running

Mechanical
hour meter

Main switch is
ON

Digital hour meter

Voltage meter

Charge lamp

Water pressure
Charge
meter
warning unit

Speedometer

2- AND 4-STROKE ENGINES

Above 40 [3-cyl.] w/ oil injection (except L/250G),
Above F30 (Mechanical RC)

Fuel meter

6Y5-83553-00 (2.5 m)

Fuse

Trim meter
6Y7-83670-40 (BLK)
-50 (WHT)

ANALOG METER (6Y7)

Water temperature
meter

688-82520-00

Lamp switch

6Y5-83653-00 (5 m)
-10 (6 m)
-20 (7 m)
-30 (8 m)
-40 (9 m)
-50 (10.5 m)

Tachometer
6Y7-83540-80 (BLK)
-90 (WHT)

WIRING DIAGRAMS

WIRING DIAGRAMS
INTERCHANGEABILITY BETWEEN TACHOMETER AND ENGINE
The wire-harness adapter is available for connection between 2006 former engine and 2007 later
gauge or between 2006 former gauge and 2007 later engine. The water detection warning and
check engine warning are no longer activated if either 2007 later engine or 2007 later gauge is
installed.
Wire-harness adapter 1
P/N: 6Y5-85335-00
P

Gy
P

G/R

G/W

G/R

B/W

G/W

G/R

ENGINE

GAUGE

30 cm (1 ft)

Wire-harness adapter 2
P/N: 6Y5-85335-10
X

X
Gy

G/R

G/W

ENGINE

GAUGE

30 cm (1 ft)

For US and Canada,

The interchangeability between engine and gauge for model year is shown in the table below,
Engine
- 2003

2004 -

Gauge
- 2003
2004 - 2006
2007 - 2003
2004 - 2006
2007 -

Interchangeability
OK
OK
Requires 6Y5-85335-10
Requires 6Y5-85335-00
OK
OK

5-42

WIRING DIAGRAMS
ANALOG TACHOMETER
4-stroke engine (Fuel injected engines, F30A (F30), F40B (F40), FT50C, F50D, F95A and F100B)

Engine

Conventional EXT wire harness Wire harness adapter

Gauge
2007-

-2006
8

6Y7-83540-80/90

(*1)

6Y7-83670-40/50

Wire harness adapter 2

6Y5-85335-10 (30 cm, 1 ft)

-2006

2007-

6Y7-83540-40/50

6Y7-83670-00/20

Wire harness adapter 1

6Y5-85335-00 (30 cm, 1 ft)
Signal description
(1) Trim GND
(2) Overheat signal
(3) Oil level signal (RED)
(4) Oil level signal (GRN)
(5) Trim signal
(6) Oil press. signal
(7) Water detection signal
(8) Check engine signal
() Not used

Conventional EXT wire harness

68F-82553-50 (5 m, 16 ft)
68F-82553-60 (6 m, 20 ft)
68F-82553-70 (7 m, 23 ft)
68F-82553-80 (8 m, 26 ft)
68F-82553-90 (9 m, 31 ft)
68F-82553-A0 (10.5 m, 33 ft)

(*1) Connect to the ground

wire.

2-stroke engine (HPDI engines: 2007-, carbureted engines w/ oil injection: 2008-)

Conventional EXT wire harness Wire harness adapter

Engine

Gauge
2007-

-2006
8

(*2)
2

6Y7-83540-80/90

6Y7-83670-40/50

Wire harness adapter 2

6Y5-85335-10 (30 cm, 1 ft)

-2006

2007-

6Y7-83540-00/10

(*3)

3 3

Relay

Wire harness adapter 1

Conventional EXT wire harness

68F-82553-50 (5 m, 16 ft)
68F-82553-60 (6 m, 20 ft)
68F-82553-70 (7 m, 23 ft)
68F-82553-80 (8 m, 26 ft)
68F-82553-90 (9 m, 31 ft)
68F-82553-A0 (10.5 m, 33 ft)

(*2) Disconnect the gray wire

and insulate the terminals.

5-43

6Y7-83670-00/20
(*3) Oil level signal (YLW)

WIRING DIAGRAMS
DIGITAL TACHOMETER
4-stroke engine (Fuel injected engines, F30A (F30), F40B (F40), FT50C, F50D, F95A and F100B)

Engine

Conventional EXT wire harness Wire harness adapter

Gauge
2007-

-2006
8

6Y5-8350T-90
1

(*1)

Wire harness adapter 2

6Y5-85335-10 (30 cm, 1 ft)

-2006

2007

TACH
5
x100
r/min

set

4
3
2
1

mode

6Y5-8350T-03

Wire harness adapter 1

Conventional EXT wire harness

68F-82553-50 (5 m, 16 ft)
68F-82553-60 (6 m, 20 ft)
68F-82553-70 (7 m, 23 ft)
68F-82553-80 (8 m, 26 ft)
68F-82553-90 (9 m, 31 ft)
68F-82553-A0 (10.5 m, 33 ft)

(*1) Connect to the ground

wire.

2-stroke engine (HPDI engines: 2007-, carbureted engines w/ oil injection: 2008-)

Conventional EXT wire harness Wire harness adapter

Engine

Gauge
2007-

-2006
8

8
2

4
1
5

(*2)

6Y5-8350T-90
1

Wire harness adapter 2

6Y5-85335-10 (30 cm, 1 ft)

-2006

20072

2
2

2
TACH
5
x100
r/min

set

Wire harness adapter 1

Conventional EXT wire harness

68F-82553-50 (5 m, 16 ft)
68F-82553-60 (6 m, 20 ft)
68F-82553-70 (7 m, 23 ft)
68F-82553-80 (8 m, 26 ft)
68F-82553-90 (9 m, 31 ft)
68F-82553-A0 (10.5 m, 33 ft)

(*2) Disconnect the gray wire

and insulate the terminals.

5-44

4
3
2
1

mode

6Y5-8350T-03

RIGGING GROMMET DESCRIPTION

* If the optional equipment will be installed, cut out the surface skin of rigging grommet on the prescribed position.

2-STROKE V4 OIL INJECTION

Fuel hose

Throttle cable

Remote oil hose

Coolant temp. lead (OP)

10-pin main harness

Coolant press. tube (OP)

Gauge harness &
Remote oil tank lead

Shift cable

Battery cable

Speed tube

2-STROKE V6 (2.6L) OIL INJECTION

Throttle cable

Speed tube

10-pin main harness

Fuel hose

Gauge harness

Remote oil hose

Coolant press. tube and/or

Coolant temp. lead (OP)

Battery cable

Remote oil tank lead

Shift cable

Isolator cable (OP)

2-STROKE V6 (3.1L & 3.3L)

10-pin main harness

Coolant press. tube and/or

Coolant temp. lead (OP)

Shift cable

Fuel hose

Gauge harness
Remote oil tank lead

Speed tube
Remote oil hose
Isolator cable (OP)

Throttle cable

Battery cable

5-45

RIGGING GROMMET DESCRIPTION

F75, F80, F90, F100, F115
10-pin main harness

Coolant press. tube or

Coolant temp. lead (OP)

Throttle cable
Speed tube

Gauge harness
Battery cable

Shift cable

Fuel hose

F150
Coolant temp. lead (OP)

10-pin main harness

Throttle cable

Coolant press. tube (OP)

Isolator lead (OP)

Flushing hose (Market OP)

Battery cable
Shift cable
Gauge harness
Speed tube
Fuel hose

F200, F225, F250 w/ Variable Camshaft Timing

[Mechanical RC]
Coolant temp. lead and/or
Coolant press. tube (OP)
10-pin main harness
Isolator cable (OP)
Throttle cable

Flushing hose (Market OP)

Battery cable

Shift cable

Gauge harness

Speed tube

Fuel hose

5-46

RIGGING GROMMET DESCRIPTION

F200, F225, F250, F275 VMAX (SHO)
Coolant temp. wire/
pressure tube (OP)
Throttle cable
(for conventional gauge)

Fuel hose
M6 bolt: 8 Nm, 0.8 kgfm, 13 ftlb

10-pin main wire-harness

Flushing hose (market OP)
Speedometer tube
Shift cable

Position the hose clip

end as shown

Gauge wire-harness
or Pigtail bus wire

Battery cable

F225, F250, F300 (V6-4.2L) [DERC]

Fuel hose
M6 bolt: 8 Nm, 0.8 kgfm, 13 ftlb

16-pin main wire-harness

Isolator cable (OP)

Flushing hose (market OP)

Speedometer tube
Battery cable

Position the hose clip

end as shown

F350, F300 (V8) [DERC]

16-pin main harness
Bolt: 10 Nm, 1.0 kgfm, 7.4 ftlb
Battery cable
Flushing hose (Market OP)

Isolator cable (OP)

Speed tube (OP)

Fuel hose

Position the hose clip

end as shown

5-47

MEMO

DIGITAL NETWORK GAUGE (6Y8)

DIGITAL NETWORK GAUGE COMPATIBLE MODEL ........................... 6-2

DIGITAL NETWORK GAUGE APPLICATION......................................... 6-2
SQUARE STYLE GAUGE APPLICATION ........................................... 6-2
ROUND STYLE GAUGE APPLICATION ............................................. 6-3
DIGITAL NETWORK GAUGE DIMENSIONS .......................................... 6-3
SQUARE STYLE GAUGE DIMENSIONS ............................................ 6-3
ROUND STYLE GAUGE DIMENSIONS .............................................. 6-4
OPTIONAL EQUIPMENTS ....................................................................... 6-5
MULTI-SENSOR APPLICATION.......................................................... 6-5
FITTING PLATE ................................................................................... 6-5
SPEED SENSOR KIT........................................................................... 6-6
COOLANT PRESSURE SENSOR KIT................................................. 6-6
WIRE HARNESS ...................................................................................... 6-7
MAIN BUS WIRE .................................................................................. 6-7
PIGTAIL BUS WIRE ............................................................................. 6-7
SYSTEM POWER SUPPLY WIRE....................................................... 6-7
IMMOBILIZER POWER DISTRIBUTION WIRE 1 ................................ 6-7
FUEL TANK / GPS WIRE ..................................................................... 6-8
NETWORK HUB ....................................................................................... 6-8
IMMOBILIZER UNIT ................................................................................. 6-9
NETWORK WIRING DIAGRAMS........................................................... 6-10
FUEL INJECTED F30-F250 [Mechanical RC] & HPDI ENGINES...... 6-10
F250B, F300A (V8) [DERC] (2011 MODEL) ...................................... 6-13
INITIAL GAUGE SETUP......................................................................... 6-19
TROUBLESHOOTING............................................................................ 6-20
BASIC REQUIREMENTS ....................................................................... 6-21
NMEA0183 COMPATIBLE EQUIPMENTS CONNECTION ................... 6-21

6-1

DIGITAL NETWORK GAUGE COMPATIBLE MODEL

The following models can accept the digital network gauges.
Electronic fuel injected 4-stroke engines
HPDI engines
* US & Canada: 2006 and later models
* Others: 2007 and later models

Also, those engines can accept the conventional gauges 6Y5 and 6Y7 (except DERC engines).
Therefore, you must select one of two gauge systems.
If you select the digital network gauge system, see the information below.
For further information, see the applicable service guide, installation manual, etc.

DIGITAL NETWORK GAUGE APPLICATION

SQUARE STYLE GAUGE APPLICATION
Large digital display and dot matrix expression design.

Ref. No.
Part name
1
Tachometer

Part No.
6Y8-8350T-01

Speedometer

6Y8-8350S-01

Fuel management gauge

Fuel mgt gauge w/speedometer

6Y8-8350F-01

6Y8-83500-01

Remarks
Requires optional speed sensor, or NMEA compatible
GPS
Requires optional speed sensor, or NMEA compatible
GPS

6-2

DIGITAL NETWORK GAUGE APPLICATION

ROUND STYLE GAUGE APPLICATION
Similar shape design as conventional 6Y5 digital gauges.

Ref. No.
Part name
1
Tachometer
Fuel mgt gauge w/ speedome2
ter

Part No.
6Y8-8350T-11
6Y8-83500-11

Remarks
Requires optional speed sensor, or NMEA compatible
GPS

DIGITAL NETWORK GAUGE DIMENSIONS

SQUARE STYLE GAUGE DIMENSIONS
SURFACE MOUNT
mm (in.)

FLUSH MOUNT
mm (in.)

6-3

DIGITAL NETWORK GAUGE DIMENSIONS

ROUND STYLE GAUGE DIMENSIONS
mm (in.)

6-4

OPTIONAL EQUIPMENTS
MULTI-SENSOR APPLICATION
Boat speed, water depth and water surface temperature can be obtained.
For installation, see the instruction which is accompanied with the sensor.

mm (in.)

mm (in.)
3050 (10 ft)

4900 (16 ft)

125 (4.92)

130 (5.12)

96 (3.78)

75 (2.95)

52 (2.05)

50.8 (2)

Ref. No.
Part name
1
Transom multi-sensor
Thru-hull multi-sensor 1
2
Thru-hull multi-sensor 2

Part No.
6Y8-83688-01
6Y8-83688-11
6Y8-83688-20

Remarks
Plastic body
Bronze body

FITTING PLATE
If the fitting surface is rough, insert the plate between a board and the ring nut of gauge.
mm (in.)

20 (0.79)

.74)

95 (3

t = 1.5 (0.06)

Part No.

Remarks

6Y8-83514-00

6-5

OPTIONAL EQUIPMENTS
SPEED SENSOR KIT
Uses to pick up the pitot tube pressure for water speed. For installation and connection, see the
instruction in the kit.
The speed sensor kit may include in the rigging kit.

Ref. No.
Kit Part No.
1
60V-8A4L1-11
2

6AW-8A4L1-01

Remarks
Fuel injected F30-F300 (V6), HPDI
F350/F300 (V8), additional transom pitot tube (688-83556-01) and pressure tube (688-83557-00) required.

COOLANT PRESSURE SENSOR KIT

Uses to pick up the coolant pressure of engine. For installation and connection, see the instruction
in the kit.

Ref. No.
Kit Part No.
1
60V-8A4L0-12
2
69J-8A4L0-20
3
63P-8A4L0-00

Remarks
Fuel injected F30-F115, HPDI
F200-F225 (3.3L)
F150, F200-F250 (3.3L-VCT), F225-F300 (4.2L)

* For F350/F300 (V8), standard installed from factory.

6-6

WIRE HARNESS
MAIN BUS WIRE
Uses to connect between the hub and hub.
Part No.
6Y8-82553-41
6Y8-82553-31
6Y8-82553-21
6Y8-82553-11
6Y8-82553-50
6Y8-82553-01

Length
30 ft, 9.1 m
25 ft, 7.6 m
20 ft, 6.1 m
15 ft, 4.6 m
10 ft, 3.0 m
1 ft, 0.3 m

Remarks
R

Length

(GRY)

PIGTAIL BUS WIRE

Uses to connect between the hub and gauge and/or between the engine and the hub.
Part No.
6Y8-82521-51
6Y8-82521-41
6Y8-82521-31
6Y8-82521-21
6Y8-82521-11
6Y8-82521-01

Length
12 ft, 3.6 m
9 ft, 2.7 m
6 ft, 1.8 m
3 ft, 0.9 m
2 ft, 0.6 m
1 ft, 0.3 m

Remarks

Length

(WHT)

SYSTEM POWER SUPPLY WIRE

Uses to connect between the switch panel and the hub, and supply the electric power to the system.
Part No.
6Y8-83553-01

mm (in.)

Remarks
With 10 amps fuse

B
B

(10A)

(RED)

70 (2.75)
170 (6.63)
2400 (94)

IMMOBILIZER POWER DISTRIBUTION WIRE 1

This wire lead is used to supply the permanent electric power to the immobilizer unit, in case of
multi-application.
Part No.
6H5-81315-00

mm (in.)

Remarks
For fuel injection F30 F/FL115A
multi-application w/ immobilizer

90 (3.54)
R

240 (9.45)

6-7

WIRE HARNESS
FUEL TANK / GPS WIRE
Uses to connect between a fuel tank level sensor and/or a MNEA0183 compatible GPS and the
speedometer (with fuel mgt gauge).
Part No.
6Y8-8356N-01

mm (in.)

Remarks
Twin fuel tanks acceptable

B
P/B

GPS

W (+)
L (GND)
P/B
B
P
B

Fuel
tank

B
W
(BLK)

220 (8.66)
300 (11.8)

NETWORK HUB
Uses to distribute the digital signal and electric power to the gauges and the other hubs.
Ref. No.
1
2
3
4

Part name
Multi-hub
Single hub (Inline hub)
2-pin sealing cap, RED
4-pin sealing cap, WHT

Part No.
6Y8-81920-01
6Y8-81920-11
6Y8-82582-01
6Y8-82582-11

Remarks
With ending resistor cap (P/N: 6Y8-85371-01)
Included ending resistor
Same as bus wire cap of engine wire harness

mm (in.)

22.55
(0.88)

mm (in.)

19.65
(0.77)

42 (1.65)
(WHT)

194.8 (7.67)
178 (7.01)
21.4
(0.84)

18.54 (0.73)
26 (1.02)

3
19.3 (0.76)

7 (0.28)

41.4
(1.63)

10
(0.39)

Resistor cap (GRY)

(RED)

23.95 (0.94)
26 (1.02)
20.25 (0.79)

* Face the connectors downward for installation.

(WHT)

6-8

IMMOBILIZER UNIT
Immobilizer acceptable model:
Fuel injection F30 and F40
Fuel injection F40(4-cyl) up to F100 (RC) (2010 and later model)
F/FL115 (2011 and later model)
F/FL225, F/FL250, F/FL300 offshore (V6-4.2L)
F/FL350 (2011 and later model)

Yamaha Security System locks the engine when starting.

9 (0.35)

8.5
(0.33)

6.9 (0.27)
2400 (94.5) (*1)
200 (7.87)

104 (4.09)

36
(1.42)

Remarks
For EU, RC
For EU, F30/F40 tiller handle
For US/ANZ, RC
For JPN, RC

112 (4.41)

Part No.
6Y8-86254-02
6Y8-86254-12
6Y8-86254-20
6Y8-86254-30

(WHT)
R

9 (0.35)

128 (5.04)
146 (5.75)

(*1) 3700 mm, 146 in for F30/F40 tiller handle

6-9

6-10

Speed sensor

Coolant press.
sensor (OP)

ECM

FUEL TANK

Trim
sensor
Single-hub
with resistor

Fuse (10A)

TACH

SPEED/FUEL

Multi-hub

(+)

(GND)

GPS

NMEA
0183

Fuel injected F30 F/FL115

Resistor

NETWORK WIRING DIAGRAMS

FUEL INJECTED F30-F250 [Mechanical RC] & HPDI ENGINES

SINGLE ENGINE

6-11

Multi-sensor (OP)

ECM

Coolant press.
sensor (OP)

Speed sensor

ECM

Coolant press.
sensor (OP)

Trim
sensor

Trim
sensor
Resistor

FUEL TANK 2

Cap

Multi-hub

FUEL TANK 1

TACH(S)

TACH(P)

FUEL

(GND)

(+)

(*1)

Resistor

NMEA
0183

GPS

Fuel injected
F30 F/FL115

Cap

(* 1) Only one immobilizer is required.

Cap

Multi-hub

Immobilizer PWR distribution wire 1

SPEED

Multi-hub

Fuse (10A)

Permanent
power relay wire

NETWORK WIRING DIAGRAMS

FUEL INJECTED F30-F250 [Mechanical RC] & HPDI ENGINES

TWIN ENGINE

6-12

Multi-sensor (OP)

ECM

Coolant press.
sensor (OP)

Speed sensor

ECM

Coolant press.
sensor (OP)

ECM

Coolant press.
sensor (OP)

Trim
sensor

Resistor

Multi-hub

Cap Cap

FUEL TANK 2

Cap

Multi-hub

FUEL TANK 1

Cap

FUEL

TACH(S)

TACH(C)

Cap

TACH(P)

Cap

SPEED

Multi-hub

(+)

NMEA
0183

GPS

Resistor

(GND)

Multi-hub

Fuse (10A)

NETWORK WIRING DIAGRAMS

FUEL INJECTED F30-F250 [Mechanical RC] & HPDI ENGINES

TRIPLE ENGINE

6-13

ECM

Electronic
throttle body

(*1) For 6Y9 network system

Multi-sensor
(Depth, Temp, Speed)

Speed sensor
(OP)

Shift actuator

(*1)

TACH

Fuse (10A)

Single SW panel
6R5-82570-05

Multi-hub

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20
10m: 6X6-8258A-30
12m: 6X6-8258A-40

Single hub
w/ resistor

Fuel tank

Binnacle single RC
6X6-48205-31

SPEED

NMEA0183
compatible
GPS

(+)

(GND)

Not used

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

SINGLE ENGINE W/ BINNACLE RC

6-14

ECM

Electronic
throttle body

(*1) For 6Y9 network system

Multi-sensor
(Depth, Temp, Speed)

Speed sensor
(OP)

Shift actuator

ECM

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20
10m: 6X6-8258A-30
12m: 6X6-8258A-40

Single hub
w/ resistor

Fuel tank

Concealed RC
6X7-48206-10

Multi-hub

(*1)

TACH

Fuse (10A)

IG switch panel
64D-82570-20

SPEED

NMEA0183
compatible
GPS

(+)

(GND)

Not used

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

SINGLE ENGINE W/ CONCEALED RC

6-15

ECM

Electronic
throttle body

(*1) For 6Y9 network system

Speed sensor
(OP)

Shift actuator

Fuel tank 2
Multi-sensor
(Depth, Temp, Speed)

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20
10m: 6X6-8258A-30
12m: 6X6-8258A-40

Fuel tank 1

(*1)

Multi-hub

Conversion harness L
6X6-8258A-L0

Binnacle twin RC
6X6-48207-31

TACH

SPEED

NMEA0183
compatible
GPS

(+)

(GND)

Multi-hub

FUEL MGT

Fuse (10A)

Twin SW panel
6Y8-82570-02

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

TWIN ENGINE

6-16

ECM

Electronic
throttle body

(*1) For 6Y9 network system

Multi-sensor
(Depth, Temp, Speed)

Shift actuator

Speed sensor
(OP)

Shift actuator

Multi-hub

Fuel tank 2

Fuel tank 1

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20 For station
10m: 6X6-8258A-30 selector SW
12m: 6X6-8258A-40

For 2nd helm

Multi-hub

(*1)

Multi-hub

TACH

SPEED

TACH

(+)

(GND)

NMEA0183
compatible
GPS

Multi-hub

TACH

Fuse (10A)

Triple SW
panel
6X5-82570-01

FUEL MGT

Conversion harness L
6X6-8258A-L0

Binnacle triple RC
6X6-48208-41

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

TRIPLE ENGINE

ECM

6-17

Electronic
throttle body

(*1) For 6Y9 network system

Multi-sensor
(Depth, Temp, Speed)

Shift actuator

Fuel tank 2

2nd helm-harness (12P-2P)

5m: 6X6-8258A-B1
8m: 6X6-8258A-D1
12m: 6X6-8258A-F1

2nd helm-harness (3/4/6P)

5m: 6X6-8258A-G0
8m: 6X6-8258A-H0
12m: 6X6-8258A-J0

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20
10m: 6X6-8258A-30
12m: 6X6-8258A-40

Fuel tank 1

Multi-hub
TACH

Station
selector SW
6X6-82570-B0

Multi-hub

Station
selector SW
6X6-82570-B0

Single RC
6X6-48205-51

(*1)

Single RC
6X6-48205-41

SPEED/FUEL

Single IG SW
6X6-82570-00

SPEED/FUEL

Conversion
harness M
6X6-8258A-M0

TACH

Fuse
(10A)

Single IG SW
6R5-82570-05

NMEA0183
compatible
GPS

(+)

(GND)

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

DUAL STATION/ SINGLE ENGINE

6-18

ECM

Electronic
throttle body

(*1) For 6Y9 network system

Speed sensor
(OP)

Shift actuator

Fuel tank 2

Multi-sensor
(Depth, Temp, Speed)

2nd helm-harness (3/4/6P)

5m: 6X6-8258A-G0
8m: 6X6-8258A-H0
12m: 6X6-8258A-J0
2nd helm-harness (12P-2P)
5m: 6X6-8258A-B1
8m: 6X6-8258A-D1
12m: 6X6-8258A-F1

New main-harness (16P)

6m: 6X6-8258A-00
7m: 6X6-8258A-10
8m: 6X6-8258A-20
10m: 6X6-8258A-30
12m: 6X6-8258A-40

Fuel tank 1

Multi-hub
TACH

SPEED

FUEL MGT

(+)

(GND)

NMEA0183
compatible
GPS
2nd helm SW panel
6X6-82570-10

TACH

Conversion
harness N
6X6-8258A-N0

TACH

SPEED/FUEL

Station
selector SW
6X6-82570-B0

Binnacle twin RC
(2nd helm)
6X6-48207-51

Multi-hub

(*1)

Multi-hub

Fuse
(10A)

Binnacle twin RC (Main helm)

6X6-48207-41
Station
Main helm
selector SW
SW panel
6X6-82570-B0
6Y8-82570-02
Conversion
harness L
6X6-8258A-L0
Multi-hub

NETWORK WIRING DIAGRAMS

F250B, F300A (V8) [DERC] (2011 MODEL)

DUAL STATION/ TWIN ENGINE

INITIAL GAUGE SETUP

If two or more engines with digital network gauges are installed, the initial setup is required for
proper gauge operation.
The ignition switches have to be turned to ON in order from Port to Starboard in 2 seconds or more
interval, which can memorize the engine number into each ECM by a rule.
The 1st turned on ignition switch is memorized as No.1 engine.
The 2nd turned on is memorized as No.2 engine.
This can obtain easier engine number recognition for gauge setup.
When the initial recognition setup has been stumbled, reset the engine number and perform it again
with the tachometer.
For further information, see the installation manual in the rigging kit.
For DERC engines, the digital electronic control system recognizes the engine number automatically, therefore the key switch ON in number order is not required.

6-19

TROUBLESHOOTING
The following table shows the main presumed troubles if the system or gauge is incorrectly set up,
incorrectly operated, or malfunctioned.
For detail information, see the applicable installation manual and/or the troubleshooting guide.
Symptom

Cause

Measure

Note

Engine recognition is wrong.

(for multi-applications)

Push SET for 10 seconds to

default the engine number.
Memorize each engine number again.

See Custom Mode for procedure to set the engine number.

Speedometer or Comb.
Speedometer & Fuel mgt
gauge shows incorrect fuel
level.

Fuel sensor selection is wrong.

Setup the fuel sensor to correctly resistance.

ABYC sensor: 33-240

(Default)
Europe sensor: 0-180
YAMAHA sensor: 5-105

Fuel mgt gauge shows incorrect remaining fuel

Fuel capacity setting is wrong.

(for SQR Fuel mgt Gauge)

Fill the tank with fuel, and set

fuel tank capacity.

Default setting is 50 gallons.

Fuel mgt gauge shows incorrect fuel consumption

Engine recognition is wrong.

(for multi-applications)

Default the engine number,

and turn the key switch on in
order from portside engine to
rememorize each engine number.

See Custom Mode of Tachometer for procedure to setup the

engine number.

Gauge display does not

wakeup.

Electric power is not supplied.

Gauge is damaged.

Replace fuse.
Connect the couplers securely.
Replace the damaged wire or
hub.
Replace the gauge.

Be sure to use 10 amps fuse.

Illumination does not light.

Electric power is not supplied.

Gauge is damaged.

Replace fuse.
Connect the couplers securely.
Replace the damaged wire or
hub.
Replace the gauge.

Be sure to use 10 amps fuse.

Gauge shows ----.

Digital signal is not received.

Connect the couplers securely.

Replace the damaged bus
wire or hub.

Verify the system with the

optional checker.

Gauge unstably operates.

Resistor is not connected to

the ending hubs.

Connect the gray 6-pin cap to

the ending multi-hubs.

Single hub is included resistor.

Gauge response is poor or

down.

Market obtainable unit connected to the system is failed.

Signal volume has exceeded
50% of the capacity.

Replace the unit.

Remove the heavy signal output unit.

Verify the system with the

optional checker.

Trim gauge always shows fully

tilted up position.

Trim sensor signal is not

received.

Connect pink lead connectors

each other.

See the installation manual.

Trim gauge shows incorrect

position.

Initial position setting is wrong.

Trim sensor is damaged.

Put the motor in the fully

trimmed-in position, and reset
the initial (zero) trim angle.
Replace the trim sensor.

See Custom Mode for procedure to set the fully trimmed-in

angle.

Optional sensor has not

installed.

Install the optional sensor.

See the instruction supplied

with the sensor kit.

Monitor display of tachometer

remains in the default setting.

Select the coolant pressure

display.

See Custom Mode for procedure to select the display.

Engine does not have the oil

pressure sensor.

F30-F100 cannot show the oil

pressure.

Tachometer does not setup to

show the oil pressure.

Select the oil press. display.

See Custom Mode to setup

display.

Tachometer shows incorrect

engine RPM.

Boat speed and/or Coolant

pressure gauge does not
show.

Oil pressure is not shown.

6-20

BASIC REQUIREMENTS
The following basic conditions are required for the digital network gauge system to install its components onto a boat.
Item

Conditions

Symptom

Total amount quantity of unit

for connecting to the system

50 units or less (Including market obtainable units, exclusive

gauges and engine ECMs).

Total amount length of the

main bus wires.

50 meter (164 feet) or less

Acceptable volume of digital

communication signals

50% or less of overall signal

capacity

Bus wires distance from electrical noise equipments

(Antenna cable, Generator,
Radio, etc.)

30 cm (1 ft) and more

Temperature for performing

bus wires and hubs

80C (176F) or less

Gauge unstably shows.

Gauge response is poor.

Note

Check the system with the

optional checker.
Verify the conditions of system.

NMEA0183 COMPATIBLE EQUIPMENTS CONNECTION

The digital network gauge system accepts the signal of NMEA0183 version 2.0, 2.1, or 3.01 with following sentence.
Date

Sentence

Speed and Time

RMC

Water depth

DBT

Water surface temp.

MTW

* If the signal sentence is not shown on an electric unit or its instruction, ask to the manufacturer.

6-21

MEMO

DIGITAL NETWORK PREMIUM GAUGE (6Y9)

DIGITAL NETWORK PREMIUM GAUGE COMPATIBLE MODEL ......... 7-3

DIGITAL NETWORK PREMIUM GAUGE APPLICATION....................... 7-3
DIGITAL NETWORK PREMIUM GAUGE DIMENSIONS ........................ 7-4
PREMIUM COLOR GAUGE DIMENSIONS ......................................... 7-4
OPTIONAL EQUIPMENTS ....................................................................... 7-5
TRANSOM MULTI-SENSOR (6Y9)...................................................... 7-5
IMMOBILIZER UNIT ............................................................................. 7-5
NMEA2000 GATEWAY ........................................................................ 7-6
ANALOG GAUGE INTERFACE (IF)..................................................... 7-6
SPEED SENSOR KIT........................................................................... 7-7
COOLANT PRESSURE SENSOR KIT................................................. 7-7
NETWORK HUB ....................................................................................... 7-8
WIRE-HARNESS ...................................................................................... 7-9
MAIN BUS WIRE .................................................................................. 7-9
PIGTAIL BUS WIRE ............................................................................. 7-9
GPS WIRE............................................................................................ 7-9
TANK WIRE.......................................................................................... 7-9
SYSTEM POWER SUPPLY WIRE..................................................... 7-10
SYSTEM POWER DISTRIBUTION WIRE.......................................... 7-10
IMMOBILIZER POWER DISTRIBUTION WIRE 2 .............................. 7-10
CONVERSION HARNESS ................................................................. 7-11
CONVERSION HARNESS 1 .............................................................. 7-11
CONVERSION HARNESS 4 .............................................................. 7-11
CONVERSION HARNESS 5 .............................................................. 7-11
CONVERSION HARNESS 6 .............................................................. 7-11
CONVERSION HARNESS L .............................................................. 7-12
TWINNING HARNESS ....................................................................... 7-12
CONVERSION HARNESS M (FOR 2ND HELM) ............................... 7-12
CONVERSION HARNESS N (FOR 2ND HELM) ............................... 7-12
CONVERSION HARNESS P (FOR 2ND HELM)................................ 7-13
CONVERSION HARNESS K (FOR DUAL STATION)........................ 7-13
To be continued.

7-1

DIGITAL NETWORK PREMIUM GAUGE (6Y9)

NETWORK WIRING DIAGRAMS........................................................... 7-14

SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE
(BINNACLE RC)............................................................................. 7-14
SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE
(BINNACLE RC)............................................................................. 7-16
SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE
(CONCEALED RC) ........................................................................ 7-18
SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE
(CONCEALED RC) ........................................................................ 7-20
SINGLE STATION W/ 6Y9 GAUGE TWIN ENGINE .......................... 7-22
SINGLE STATION W/ 6Y8 GAUGE TWIN ENGINE .......................... 7-24
SINGLE STATION W/ 6Y9 GAUGE TRIPLE ENGINE....................... 7-26
SINGLE STATION W/ 6Y8 GAUGE TRIPLE ENGINE....................... 7-28
SINGLE STATION W/ 6Y9 GAUGE QUAD ENGINE
(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)............. 7-30
DUAL STATION W/ 6Y9 GAUGE SINGLE ENGINE.......................... 7-33
DUAL STATION W/ 6Y8 GAUGE SINGLE ENGINE.......................... 7-35
DUAL STATION W/ 6Y9 GAUGE TWIN ENGINE.............................. 7-37
DUAL STATION W/ 6Y8 GAUGE TWIN ENGINE.............................. 7-39
DUAL STATION W/ 6Y9 GAUGE TRIPLE ENGINE .......................... 7-41
DUAL STATION W/ 6Y9 GAUGE QUAD ENGINE
(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)............. 7-44

7-2

DIGITAL NETWORK PREMIUM GAUGE COMPATIBLE MODEL

The following models can accept Digital Network Premium Gauge (6Y9 new network system).
Global model
F/FL225F
F/FL250D
F/FL300B
F/FL350A

US model
F/LF225CA
F/LF250CA
F/LF300CA
F/LF350CA

Canada model
F/LF225CA
F/LF250CA
F/LF300CA
F/LF350CA

Remarks

For 2011 and later models

These engines can accept the conventional Digital Network Gauges (6Y8) as well.
For further information, see the applicable models service guide, installation manual, etc.

DIGITAL NETWORK PREMIUM GAUGE APPLICATION

TFT-LCD color screen, arrow key, USB port, triple engine acceptable.
Ref. No.
Part name
1
Premium color gauge assy

Part No.
6Y9-83710-01

Remarks
w/ screen cover (6Y9-87278-00)

7-3

DIGITAL NETWORK PREMIUM GAUGE DIMENSIONS

PREMIUM COLOR GAUGE DIMENSIONS
mm (in.)
11.9 (0.47)
177.5 (6.99)

98 (3.86)

164.5 (6.48)

51 (2.01)

38 (1.50)

70 (2.76)
min.

35
25
(1.38) (0.98)

85 (3.35)

25.25 (0.98)

Reference: previous gauge

152 (5.98) min.

4.2 (0.19)

Template

7-4

OPTIONAL EQUIPMENTS
TRANSOM MULTI-SENSOR (6Y9)
Part No.
6Y9-83688-00

Remarks
Depth, speed, water surface temp
mm (in.)

4900 (193)

227 (8.95)

To network hub
via wire-lead
6Y9-83553-60

70 (2.77)

99 (3.90)

157 (6.20)

IMMOBILIZER UNIT
Yamaha Security System locks the engine when starting.
Part No.
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30

Remarks
For EU (STD)
For US, ANZ
For JPN

8.5
(0.33)

6.9 (0.27)
2400 (94.5)

104 (4.09)

200 (7.87)
112 (4.41)

36
(1.42)

9 (0.35)

mm (in.)

(WHT)
R

9 (0.35)

128 (5.04)
146 (5.75)

7-5

OPTIONAL EQUIPMENTS
NMEA2000 GATEWAY
Uses to connect between NMEA2000 compatible equipments and network hub.
Part No.
6Y9-8A2D0-00

Remarks
For new network system
mm (in.)
130 (5.12)

12 (0.47)

To NMEA2000
equipments

4.8 (0.19)

To network hub
via wire-lead
6Y9-83553-50
1.2 (0.05)

5.5
(0.22)

56 (2.20)

20.5
(0.81)

116 (4.57)

7.8 (0.31)

500 (19.7)

ANALOG GAUGE INTERFACE (IF)

Uses to connect between analog gauge and network hub.
Part No.
6Y9-8A2D0-10

Remarks
For new network system, Required for each engine.

7.8 (0.31)

56 (2.20)
4.6 (0.18)

116 (4.57)

400 (15.8)
130 (5.12)

Engine selection for analog tachometer:

Single engine

PORT engine

Twin engine

PORT engine

STBD engine

Triple engine

PORT engine

CENTER engine

STBD engine

B Or B

5.5
(0.22)

16 (0.63)

To wire-harness
6Y5-83553-00
To analog
tachometer via
trim/oil lead
To network hub
6Y5-83653-*0
via wire-lead
6Y9-83553-50

20.5
(0.81)

12
(0.47)

1.8 (0.07)

mm (in.)

B Or B

7-6

OPTIONAL EQUIPMENTS
SPEED SENSOR KIT
Uses to pick up the pitot tube pressure for water speed.
Kit Part No.
60V-8A4L1-11

Remarks
Shared with previous network system

COOLANT PRESSURE SENSOR KIT

Uses to pick up the coolant pressure of engine.
Kit Part No.
63P-8A4L0-00

Remarks
Shared with previous network system

7-7

NETWORK HUB
Shared between previous and new network systems.
Ref. No.
1
2
3
4

Part name
Multi-hub
Single hub (Inline hub)
2P sealing cap, RED
4P sealing cap, WHT

Part No.
6Y8-81920-01
6Y8-81920-11
6Y8-82582-01
6Y8-82582-11

Remarks
w/ ending resistor cap (P/N: 6Y8-85371-01)
Included ending resistor

mm (in.)

22.55
(0.88)

mm (in.)

19.65
(0.77)

42 (1.65)
(WHT)

194.8 (7.67)
178 (7.01)
21.4
(0.84)

18.54 (0.73)
26 (1.02)

3
19.3 (0.76)

7 (0.28)

41.4
(1.63)

10
(0.39)

Resistor cap (GRY)

(RED)

23.95 (0.94)
26 (1.02)
20.25 (0.79)

* Face the connectors downward for installation.

(WHT)

7-8

WIRE-HARNESS
MAIN BUS WIRE
Uses to connect between the hub and hub, between the RC and hub, etc. (Shared with previous
network system)
Part No.
6Y8-82553-41
6Y8-82553-31
6Y8-82553-21
6Y8-82553-11
6Y8-82553-50
6Y8-82553-01

Length
30 ft, 9.1 m
25 ft, 7.6 m
20 ft, 6.1 m
15 ft, 4.6 m
10 ft, 3.0 m
1 ft, 0.3 m

Remarks

Length

(GRY)

PIGTAIL BUS WIRE

Uses to connect between the hub and gauge, between the hub and equipment (IF, gateway), etc.
(Shared with previous network system)
Part No.
6Y8-82521-51
6Y8-82521-41
6Y8-82521-31
6Y8-82521-21
6Y8-82521-11
6Y8-82521-01

Length
12 ft, 3.6 m
9 ft, 2.7 m
6 ft, 1.8 m
3 ft, 0.9 m
2 ft, 0.6 m
1 ft, 0.3 m

Remarks

(WHT)

Length

(WHT)

GPS WIRE
Uses to connect between premium gauge and NMEA0183 compatible GPS unit.
Part No.
6Y9-8356N-01

mm (in.)

Remarks
NMEA 0183 compatible GPS

350 (14)
L (GND)
W (+)

Green tube

To GPS
L (GND)

W (+)

(BLK)

TANK WIRE
Uses to connect between the premium gauge and a fuel tank, fresh water tank, sewage tank, etc.
Part No.
6Y9-8356N-10

mm (in.)

Remarks
4-tank acceptable

B/P G
B/G

Fuel tank #1
P
B/P

B/Or
Fuel tank #2

G
B/G
Br
B/Br

Fuel tank #3
Or
B/Or

(BLK)

Fuel tank #4

270 (10.63)

7-9

Br
B/Br

WIRE-HARNESS
SYSTEM POWER SUPPLY WIRE
Uses to connect between the SW panel and the hub, and supply the electric power to the system.
Part No.
6Y8-83553-01

mm (in.)

Remarks
Shared with previous network system

B
B

(10A)

(RED)

70 (2.75)
170 (6.63)
2400 (94)

SYSTEM POWER DISTRIBUTION WIRE

Uses to supply the electric power to each network hub, if new and previous network systems are
simultaneously used.

NOTICE
Do not connect with the main bus wire between new network and previous network.
Part No.
6Y9-83553-20

mm (in.)

Remarks
(RED)

To SW
panel

B Y

Y B

To previous
network hub

(RED)

To new
B Y
network
(RED)
hub
600 (23.6)

IMMOBILIZER POWER DISTRIBUTION WIRE 2

Supplies the electric power to activate the immobilizer system in case of multi-application.
Part No.
6Y8-81315-00

Remarks
For start/stop button SW panel
mm (in.)
2400 (94.5)

Fuse 5A

Y
R

To
immobilizer
unit

To SW panel
(Twin, Triple)

Y
R

Y
Y

To PWR supply wire

(for network system)

Fuse 5A
R

To SW panel
(Twin, Triple)

B
R

R
W

(WHT)

(BLU)

To network
hub

(WHT)

To immobilizer
unit

7-10

WIRE-HARNESS
CONVERSION HARNESS
Uses to connect between DERC and network hub.
Part No.
6Y9-83553-00

mm (in.)

Remarks
For new network system

310 (12.2)
To RC

X X X
X LW

WXW
X LW

To hub

(GRY)

(WHT)

CONVERSION HARNESS 1
Uses to connect between DERC and network hub if dual station system is used and multi-sensor is
connected.
Part No.
6Y9-83553-10

mm (in.)

Remarks
For new network system

310 (12.2)
(GRY)
To RC

X B R To hub
X L W #1

W L X
X LW

(WHT)

X B R To hub
X L W #2

(GRY)

CONVERSION HARNESS 4
Uses to connect between premium gauge and network hub.
Part No.
6Y9-83553-40

mm (in.)

Remarks
For new network system

150 (5.91)
Black taping

To hub R B
W L

(WHT)

X R To MF
L W color
X B gauge

(GRN)

CONVERSION HARNESS 5
Uses to connect between analog gauge IF/ Gateway and network hub.
Part No.
6Y9-83553-50

mm (in.)

Remarks
For new network system

160 (6.3)

To R B
hub W L
(WHT)

Green taping

R X To
W L gateway/ IF
B X

(GRN)

CONVERSION HARNESS 6
Uses to connect between multi-sensor and network hub.
Part No.
6Y9-83553-60

mm (in.)

Remarks
For new network system

240 (9.45)

To
R B
hub W L
(WHT)

7-11

Orange taping

R L
W L To multiB W sensor

(GRN)

WIRE-HARNESS
CONVERSION HARNESS L
Uses to connect between new DERC unit and previous main IG switch.
Part No.
6X6-8258A-L0

mm (in.)

Remarks

150 (6)
Y B
X W P Br
X XRX
X X

To
DERC

B Y
To SW
Br P W
panel
X R X

TWINNING HARNESS
Uses to connect between two engine group IG switches and emergency stop SW. (For quad engine
DERC special)
Part No.
6X6-8258A-U0

mm (in.)

Remarks

100 (4)
W X W
B X B

W B To main helm

SW panel
PORT engine
group (P/CP)
W B STBD engine
group (CS/S)

To emergency
stop SW
PORT engine
group (P/CP)
STBD engine
group (CS/S)

CONVERSION HARNESS M (FOR 2ND HELM)

Uses to connect between 2nd helm new DERC and 2nd helm previous start/stop SW. (Single
engine)
Part No.
6X6-8258A-M0

mm (in.)

Remarks

200 (7.87)

Y W Br To start/
X B P stop SW

Y P
Br

To
DERC
WX X
B X X

CONVERSION HARNESS N (FOR 2ND HELM)

Uses to connect between 2nd helm new DERC and 2nd helm previous start/stop SW. (Twin engine)
Part No.
6X6-8258A-N0

mm (in.)

Remarks

240 (9.45)

X P Br Y
X P Br Y

To
DERC
WXW
B X B

7-12

Y W Br
XBP

To start/
stop SW
Y W Br
XBP

WIRE-HARNESS
CONVERSION HARNESS P (FOR 2ND HELM)
Uses to connect between 2nd helm new DERC and 2nd helm previous start/stop SW. (Triple
engine)
Part No.
6X6-8258A-P0

Remarks

mm (in.)

240 (9.45)

X P Br Y
X P Br Y
X P Br Y

To
DERC

W WW
B BB

Y W Br
X BP

Y W Br To start/
X B P stop SW

Y W Br
XBP

CONVERSION HARNESS K (FOR DUAL STATION)

Uses to connect between main helm new DERC and 2nd helm previous DERC.
Part No.
6X6-8258A-K0

mm (in.)

Remarks

230 (9.06)

To
previous
DERC

Y Br Br To new

Br Y
X

DERC

7-13

7-14

ECM

(*1) For previous network system (6Y8)

(*2) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

Freshwater
tank

Sewage
tank

(*1)

To NMEA2000
Network

(*2)

USB
(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE (BINNACLE RC)

7-15

System power supply

wire

Main bus wire

Pigtail bus wire

Conversion harness
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

2
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y8-83553-01

6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40
6Y9-83553-00
6Y9-83553-40
6Y9-83553-50
6Y9-83553-60
6Y9-8356N-01
6Y9-8356N-10
6Y8-82553-01
6Y8-82553-50
6Y8-82553-11
6Y8-82553-21
6Y8-82553-31
6Y8-82553-41
6Y8-82521-01
6Y8-82521-11
6Y8-82521-21
6Y8-82521-31
6Y8-82521-41
6Y8-82521-51

Part No.

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Analog meter trim/oil

lead

Single RC
Single IG SW

29
40

Analog meter harness

Analog tachometer

Immobilizer unit

Analog trim gauge

NMEA 2000 gateway

Analog gauge interface

20
21

6Y9-83688-00

Transom multi-sensor

19
6Y9-8A2D0-00
6Y9-8A2D0-10
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6Y7-83540-80
6Y7-83540-90
6Y7-83670-40
6Y7-83670-50
6Y5-83553-00
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50
6X6-48205-31
6X6-82570-30

6Y8-81920-01
6Y8-81920-11
6Y9-83710-01

Part No.

Ref.
Part name
No.
16 Multi-hub
17 Single (inline) hub
18 Premium color gauge

EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
Single station
For binnacle RC, Main helm

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ resistor, 4-6P, White
w/ screen cover

Remarks

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE (BINNACLE RC)

7-16

ECM

(*1) For 6Y9 network system

Fuel tank 1

(*1)

TACH

SPEED/FUEL

(+)

(GND)

GPS

Not used

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE (BINNACLE RC)

Main-harness (16P)

Fuel tank/ GPS wire

Main bus wire

Pigtail bus wire

Part name

Ref.
No.

6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40
6Y8-8356N-01
6Y8-82553-01
6Y8-82553-50
6Y8-82553-11
6Y8-82553-21
6Y8-82553-31
6Y8-82553-41
6Y8-82521-01
6Y8-82521-11
6Y8-82521-21
6Y8-82521-31
6Y8-82521-41
6Y8-82521-51

Part No.
7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Transom multi-sensor

Immobilizer unit
Single RC
Single IG SW

22
29
40

Multi-hub
Single (inline) hub

16
17
19

System power supply

wire

Part name

Ref.
No.

Depth, speed, water temp,

w/ 4.9 m wire
EU
US, OCE
JP
Single station
For binnacle RC, Main helm

6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X6-48205-31
6X6-82570-30

w/ resistor cap, Black

w/ resistor, 4-6P, White

w/ 10-amps fuse, 2.4 m, 8 ft

Remarks

6Y8-83688-01

6Y8-81920-01
6Y8-81920-11

6Y8-83553-01

Part No.

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE (BINNACLE RC)

7-17

7-18

ECM

(*1) For previous network system (6Y8)

(*2) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

Freshwater
tank

Sewage
tank

(*1)

To NMEA2000
Network

(*2)

USB
(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE (CONCEALED RC)

7-19

System power supply

wire

Main bus wire

Pigtail bus wire

Conversion harness
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

2
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y8-83553-01

Part No.

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Immobilizer unit

Analog tachometer
Analog trim gauge

23
24

39
43

Concealed RC
Single IG SW

Analog meter trim/oil

lead

Analog meter harness

NMEA 2000 gateway

Analog gauge interface

20
21

6Y9-83688-00

Transom multi-sensor

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

Remarks

6Y9-8A2D0-00
6Y9-8A2D0-10
6Y8-86254-02 EU
6Y8-86254-20 US, OCE
6Y8-86254-30 JP
6Y7-83540-80 Black panel
6Y7-83540-90 White panel
6Y7-83670-40 Black panel
6Y7-83670-50 White panel
6Y5-83553-00 2.5 m, 8 ft
6Y5-83653-00 5 m, 16 ft
6Y5-83653-10 6 m, 20 ft
6Y5-83653-20 7 m, 23 ft
6Y5-83653-30 8 m, 26 ft
6Y5-83653-40 9 m, 31 ft
6Y5-83653-50 10.5 m, 33 ft
6X7-48206-10 Single station
64D-82570-20 For concealed RC

6Y8-81920-01
6Y9-83710-01

Part No.

Ref.
Part name
No.
16 Multi-hub
18 Premium color gauge

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE SINGLE ENGINE (CONCEALED RC)

7-20

ECM

(*1) For 6Y9 network system

Fuel tank 1

(*1)
14

TACH

SPEED/FUEL

(+)

(GND)

GPS

Not used

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE (CONCEALED RC)

Main-harness (16P)

Fuel tank/ GPS wire

Main bus wire

Pigtail bus wire

Part name

Ref.
No.

Part No.
7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Transom multi-sensor

Immobilizer unit

22
Concealed RC
Single IG SW

Multi-hub

39
43

System power supply

wire

Part name

Ref.
No.

EU
US, OCE
JP
Single station
For concealed RC

6Y8-83688-01
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X7-48206-10
64D-82570-20

w/ resistor cap, Black

w/ 10-amps fuse, 2.4 m, 8 ft

Remarks

Depth, speed, water temp,

w/ 4.9 m wire

6Y8-81920-01

6Y8-83553-01

Part No.

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE SINGLE ENGINE (CONCEALED RC)

7-21

STBD engine

7-22

ECM

(*4) Requires 2 pcs, and its related parts

PORT engine

(*1) For previous digital electronic controlled engine

(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

Freshwater
tank

Sewage
tank

(*2)

(*1)

To NMEA2000
Network

21
(*4)

(*3)

USB
(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE TWIN ENGINE

7-23

Immobilizer PWR distribution wire

Main bus wire

Pigtail bus wire

Conversion harness
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

2
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y8-81315-00

Part No.

w/ 5-amps fuses, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Immobilizer unit

Analog tachometer
Analog trim gauge

23
24

32
44
45
53

Twin RC
Twin IG SW
Twin start/stop SW
All start/stop SW

Analog meter trim/oil

lead

Analog meter harness

NMEA 2000 gateway

Analog gauge interface

20
21

6Y9-83688-00

Transom multi-sensor

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

Remarks

6Y9-8A2D0-00
6Y9-8A2D0-10
6Y8-86254-02 EU
6Y8-86254-20 US, OCE
6Y8-86254-30 JP
6Y7-83540-80 Black panel
6Y7-83540-90 White panel
6Y7-83670-40 Black panel
6Y7-83670-50 White panel
6Y5-83553-00 2.5 m, 8 ft
6Y5-83653-00 5 m, 16 ft
6Y5-83653-10 6 m, 20 ft
6Y5-83653-20 7 m, 23 ft
6Y5-83653-30 8 m, 26 ft
6Y5-83653-40 9 m, 31 ft
6Y5-83653-50 10.5 m, 33 ft
6X6-48207-31 Single station
6X6-82570-40 Main helm
6X6-82570-60 Main helm
6X6-82570-C0 For single/twin/triple engine

6Y8-81920-01
6Y9-83710-01

Part No.

Ref.
Part name
No.
16 Multi-hub
18 Premium color gauge

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE TWIN ENGINE

7-24

ECM

(*1)

Fuel tank 1

Fuel tank 2

(*1) For previous digital electronic controlled engine

(*2) For 6Y9 network system

(*2)

TACH

SPEED/FUEL

(+)

(GND)

GPS

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE TWIN ENGINE

Main-harness (16P)

Fuel tank/ GPS wire

Main bus wire

Pigtail bus wire

Part name

Ref.
No.

Part No.
7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Transom multi-sensor

Immobilizer unit

22
Twin RC
Twin IG SW
Twin start/stop SW
All start/stop SW

Multi-hub

32
44
45
53

Immobilizer PWR distribution wire

Part name

Ref.
No.

EU
US, OCE
JP
Single station
Main helm
Main helm
For single/twin/triple engine

6Y8-83688-01
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X6-48207-31
6X6-82570-40
6X6-82570-60
6X6-82570-C0

w/ resistor cap, Black

w/ 5-amps fuses, 2.4 m, 8 ft

Remarks

Depth, speed, water temp,

w/ 4.9 m wire

6Y8-81920-01

6Y8-81315-00

Part No.

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE TWIN ENGINE

7-25

CENTER engine

7-26

ECM

STBD engine

(*4) Requires 3 pcs, and its related parts

PORT engine

(*1) For previous digital electronic controlled engine

(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

Freshwater
tank

Sewage
tank

(*2)

(*1)

To NMEA2000
Network

21
(*4)

(*3)

USB
(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE TRIPLE ENGINE

7-27

Immobilizer PWR distribution wire

Main bus wire

Pigtail bus wire

Conversion harness
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

2
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y8-81315-00

Part No.

w/ 5-amps fuses, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Immobilizer unit

Analog tachometer
Analog trim gauge

23
24

35
47
48
53

Triple RC
Triple IG SW
Triple start/stop SW
All start/stop SW

Analog meter trim/oil

lead

Analog meter harness

NMEA 2000 gateway

Analog gauge interface

20
21

6Y9-83688-00

Transom multi-sensor

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

Remarks

6Y9-8A2D0-00
6Y9-8A2D0-10
6Y8-86254-02 EU
6Y8-86254-20 US, OCE
6Y8-86254-30 JP
6Y7-83540-80 Black panel
6Y7-83540-90 White panel
6Y7-83670-40 Black panel
6Y7-83670-50 White panel
6Y5-83553-00 2.5 m, 8 ft
6Y5-83653-00 5 m, 16 ft
6Y5-83653-10 6 m, 20 ft
6Y5-83653-20 7 m, 23 ft
6Y5-83653-30 8 m, 26 ft
6Y5-83653-40 9 m, 31 ft
6Y5-83653-50 10.5 m, 33 ft
6X6-48208-41 Single & dual station/ Main helm
6X6-82570-50 Main helm
6X6-82570-70 Main helm
6X6-82570-C0 For single/twin/triple engine

6Y8-81920-01
6Y9-83710-01

Part No.

Ref.
Part name
No.
16 Multi-hub
18 Premium color gauge

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE TRIPLE ENGINE

7-28

ECM

(*1)

Fuel tank 1

Fuel tank 2

(*1) For previous digital electronic controlled engine

(*2) For 6Y9 network system

(*2)

TACH

53
48

FUEL MGT

TACH

SPEED

(+)

(GND)

GPS

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE TRIPLE ENGINE

Main-harness (16P)

Fuel tank/ GPS wire

Main bus wire

Pigtail bus wire

Part name

Ref.
No.

Part No.
7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Transom multi-sensor

Immobilizer unit

22
Triple RC
Triple IG SW
Triple start/stop SW
All start/stop SW

Multi-hub

35
47
48
53

Immobilizer PWR distribution wire

Part name

Ref.
No.

EU
US, OCE
JP
Single & dual station/ Main helm
Main helm
Main helm
For single/twin/triple engine

6Y8-83688-01
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X6-48208-41
6X6-82570-50
6X6-82570-70
6X6-82570-C0

w/ resistor cap, Black

w/ 5-amps fuses, 2.4 m, 8 ft

Remarks

Depth, speed, water temp,

w/ 4.9 m wire

6Y8-81920-01

6Y8-81315-00

Part No.

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y8 GAUGE TRIPLE ENGINE

7-29

7-30

(GND)

GPS

(+)

USB

For 2nd
helm

(50)

(*2)

(*1)

P/CP

PTT SW

CS/S

(*1)

(50)

(*2)

(50)

For 2nd
helm

USB

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE QUAD ENGINE

(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)

7-31

Fuel
tank 1

Sewage
tank

(*3)

ECM

To NMEA2000
Network

21
(*4)

ECM

21
(*4)

To NMEA2000
Network

Fuel
tank 2

Freshwater
tank

C-PORT
engine

C-STBD
engine

STBD
engine

(*4) Requires 2 pcs, and its related parts

PORT
engine

(*1) For previous digital electronic controlled engine

(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

(*3)

7-32

System power supply

wire

Main bus wire

Pigtail bus wire

Conversion harness
Conversion harness 4
Conversion harness 5
Conversion harness 6
Conversion harness L
Twinning harness
GPS wire
Tank wire

2
4
5
6
7
8
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y8-83553-01

6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40
6Y9-83553-00
6Y9-83553-40
6Y9-83553-50
6Y9-83553-60
6X6-8258A-L0
6X6-8258A-U0
6Y9-8356N-01
6Y9-8356N-10
6Y8-82553-01
6Y8-82553-50
6Y8-82553-11
6Y8-82553-21
6Y8-82553-31
6Y8-82553-41
6Y8-82521-01
6Y8-82521-11
6Y8-82521-21
6Y8-82521-31
6Y8-82521-41
6Y8-82521-51

Part No.

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.15 m, 0.5 ft
0.1 m, 4 in
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Immobilizer unit

Analog tachometer
Analog trim gauge
Analog meter harness

23
24
25

37
50
56

Quad RC
Quad IG SW assy
Emergency stop SW

Analog meter trim/oil

lead

NMEA 2000 gateway

Analog gauge interface

20
21

6Y9-83688-00

Transom multi-sensor

6Y8-81920-01
6Y8-81920-11
6Y9-83710-01

Part No.

Ref.
Part name
No.
16 Multi-hub
17 Single (inline) hub
18 Premium color gauge

EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
Single & dual station/ Main helm
Main helm, P/CP/CS/S
For quad engine

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ resistor, 4-6P, White
w/ screen cover

Remarks

NETWORK WIRING DIAGRAMS

SINGLE STATION W/ 6Y9 GAUGE QUAD ENGINE

(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)

7-33

ECM

(*1) For previous digital electronic

controlled engine
(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

(*1)

Freshwater
tank

Sewage
tank

(*1)

(*2)

To NMEA2000
Network

(*3)

USB

Main helm

2nd helm

(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE SINGLE ENGINE

7-34

System power supply

wire

Multi-hub
Premium color gauge

Transom multi-sensor

NMEA 2000 gateway

16
18

Main bus wire

Pigtail bus wire

Conversion harness 1
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

3
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y9-8A2D0-00

6Y9-83688-00

6Y8-81920-01
6Y9-83710-01

6Y8-83553-01

6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40
6Y9-83553-10
6Y9-83553-40
6Y9-83553-50
6Y9-83553-60
6Y9-8356N-01
6Y9-8356N-10
6Y8-82553-01
6Y8-82553-50
6Y8-82553-11
6Y8-82553-21
6Y8-82553-31
6Y8-82553-41
6Y8-82521-01
6Y8-82521-11
6Y8-82521-21
6Y8-82521-31
6Y8-82521-41
6Y8-82521-51

Part No.

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Analog meter harness

Analog meter trim/oil

lead

Station selector SW

Single RC
Single RC
Single IG SW
Single start/stop SW
Emergency stop SW

30
31
40
41
42
54

2nd helm harness

(3/4/6P)

2nd helm harness

(2-12P)

Analog trim gauge

Analog tachometer

Immobilizer unit

Ref.
Part name
No.
21 Analog gauge interface

6X6-82570-B0

6Y9-8A2D0-10
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6Y7-83540-80
6Y7-83540-90
6Y7-83670-40
6Y7-83670-50
6Y5-83553-00
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48205-41
6X6-48205-51
6X6-82570-30
6X6-82570-80
6X6-82570-90

Part No.

EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
5m
8m
12 m
5m
8m
12 m
Dual station/ Main helm
Dual station/ 2nd helm
For binnacle RC, Main helm
2nd helm
2nd helm
For dual station, single/twin/
triple engine

Remarks

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE SINGLE ENGINE

7-35

ECM

(*1) For previous digital electronic

controlled engine
(*2) For 6Y9 network system

Fuel tank 1

(*1)

(*2)

TACH

SPEED

TACH

SPEED/FUEL

Main helm

2nd helm

(+)

(GND)

GPS

Not used

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y8 GAUGE SINGLE ENGINE

Main bus wire

Pigtail bus wire

System power supply

wire

Fuel tank/ GPS wire

Main-harness (16P)

Part name

Ref.
No.

6Y8-83553-01

Part No.

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

2nd helm harness

(2-12P)
2nd helm harness
(3/4/6P)
Single RC
Single RC
Single IG SW
Single start/stop SW
Emergency stop SW

28
30
31
40
41
42
Station selector SW

Immobilizer unit

6Y8-83688-01

Transom multi-sensor

6X6-82570-B0

6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48205-41
6X6-48205-51
6X6-82570-30
6X6-82570-80
6X6-82570-90

6Y8-81920-01

Part No.

Ref.
Part name
No.
16 Multi-hub

EU
US, OCE
JP
5m
8m
12 m
5m
8m
12 m
Dual station/ Main helm
Dual station/ 2nd helm
For binnacle RC, Main helm
2nd helm
2nd helm
For dual station, single/twin/
triple engine

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

Remarks

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y8 GAUGE SINGLE ENGINE

7-36

STBD engine

7-37

ECM

(*4) Requires 2 pcs, and its related parts

PORT engine

(*1) For previous digital electronic

controlled engine
(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

Sewage
tank

Fuel tank 1

Fuel tank 2

Freshwater
tank

(*1)

21
(*4)

(*2)

To NMEA2000
Network

21
(*4)

(*3)

USB

Main helm

2nd helm

(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE TWIN ENGINE

7-38

Immobilizer PWR distribution wire

Multi-hub
Premium color gauge

Transom multi-sensor

NMEA 2000 gateway

Analog gauge interface

16
18

20
21

Main bus wire

Pigtail bus wire

Conversion harness 1
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

3
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y9-8A2D0-00
6Y9-8A2D0-10

6Y9-83688-00

6Y8-81920-01
6Y9-83710-01

6Y8-81315-00

Part No.

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

w/ 5-amps fuses, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Twin RC
Twin RC
Emergency stop SW
Twin IG SW
Twin start/stop SW
Twin start/stop SW
All start/stop SW
Station selector SW

33
34
42
44
45
46
53
54

Analog meter trim/oil

lead

2nd helm harness

(3/4/6P)

Analog meter harness

Analog trim gauge

2nd helm harness

(2-12P)

Analog tachometer

Immobilizer unit

Part name

Ref.
No.

6X6-82570-B0

6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6Y7-83540-80
6Y7-83540-90
6Y7-83670-40
6Y7-83670-50
6Y5-83553-00
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48207-41
6X6-48207-51
6X6-82570-90
6X6-82570-40
6X6-82570-60
6X6-82570-E0
6X6-82570-C0

Part No.
EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
5m
8m
12 m
5m
8m
12 m
Dual station/ Main helm
Dual station/ 2nd helm
2nd helm
Main helm
Main helm
2nd helm
For single/twin/triple engine
For dual station, single/twin/
triple engine

Remarks

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE TWIN ENGINE

7-39

ECM

(*1) For previous digital electronic

controlled engine
(*2) For 6Y9 network system

Fuel tank 1

Fuel tank 2

(*1)

(*2)

TACH

SPEED

FUEL MGT

TACH

SPEED

FUEL MGT

(+)

(GND)

Main helm

2nd helm

GPS

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y8 GAUGE TWIN ENGINE

Transom multi-sensor

Pigtail bus wire

Main bus wire

Multi-hub

Fuel tank/ GPS wire

Main-harness (16P)

Part name

Ref.
No.

7-40

6Y8-83688-01

Part No.

Depth, speed, water temp,

w/ 4.9 m wire

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft
w/ resistor cap, Black

Remarks

Immobilizer unit

2nd helm harness

(2-12P)
2nd helm harness
(3/4/6P)
Twin RC
Twin RC
Emergency stop SW
Twin IG SW
Twin start/stop SW
Twin start/stop SW
All start/stop SW
Station selector SW

28
33
34
42
44
45
46
53
54

Part name

Ref.
No.

6X6-82570-B0

6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48207-41
6X6-48207-51
6X6-82570-90
6X6-82570-40
6X6-82570-60
6X6-82570-E0
6X6-82570-C0

Part No.
EU
US, OCE
JP
5m
8m
12 m
5m
8m
12 m
Dual station/ Main helm
Dual station/ 2nd helm
2nd helm
Main helm
Main helm
2nd helm
For single/twin/triple engine
For dual station, single/twin/
triple engine

Remarks

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y8 GAUGE TWIN ENGINE

7-41

ECM

(*4) Requires 3 pcs, and its related parts

PORT engine CENTER engine STBD engine

(*1) For previous digital electronic

controlled engine
(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

Fuel tank 1

Fuel tank 2

Freshwater
tank

Sewage
tank

(*1)

20
(*4)

(*2)

To NMEA2000
Network

21
(*4)

(*3)

USB

Main helm

2nd helm

(GND)

GPS

(+)

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE TRIPLE ENGINE

7-42

Immobilizer PWR distribution wire

Multi-hub
Premium color gauge

Transom multi-sensor

NMEA 2000 gateway

Analog gauge interface

16
18

20
21

Main bus wire

Pigtail bus wire

Conversion harness 1
Conversion harness 4
Conversion harness 5
Conversion harness 6
GPS wire
Tank wire

3
4
5
6
10
11

Main-harness (16P)

Part name

Ref.
No.

6Y9-8A2D0-00
6Y9-8A2D0-10

6Y9-83688-00

6Y8-81920-01
6Y9-83710-01

6Y8-81315-00

Part No.

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ screen cover

w/ 5-amps fuses, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Triple RC
Triple RC
Emergency stop SW
Triple IG SW
Triple start/stop SW
Triple start/stop SW
All start/stop SW
Station selector SW

35
36
42
47
48
49
53
54

Analog meter trim/oil

lead

2nd helm harness

(3/4/6P)

Analog meter harness

Analog trim gauge

2nd helm harness

(2-12P)

Analog tachometer

Immobilizer unit

Part name

Ref.
No.
EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
5m
8m
12 m
5m
8m
12 m
Single & dual station/ Main helm
Single & dual station/ 2nd helm
2nd helm
Main helm
Main helm
2nd helm
For single/twin/triple engine
For dual station, single/twin/
triple engine

6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6Y7-83540-80
6Y7-83540-90
6Y7-83670-40
6Y7-83670-50
6Y5-83553-00
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48208-41
6X6-48208-51
6X6-82570-90
6X6-82570-50
6X6-82570-70
6X6-82570-F0
6X6-82570-C0
6X6-82570-B0

Remarks

Part No.

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE TRIPLE ENGINE

MEMO

7-43

Main helm

2nd helm

7-44

(*3)

USB

21
(*4)

(*2)

(*1)

P/CP

PTT SW

CS/S

(*1)

(*2)

(*1)

21
(*4)

(*3)

USB

23
24

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE QUAD ENGINE

(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)

7-45

Fuel
tank 1

Sewage
tank

(GND)

GPS

(+)

(*3)

USB

ECM

21
(*4)

(50)

To NMEA2000
Network

(50)

13
12

(50)

To NMEA2000
Network

21
(*4)

(50)

(*3)

Fuel
tank 2

Freshwater
tank

23
24

(*4) Requires 2 pcs, and its related parts

PORT engine C-PORT engine C-STBD engine STBD engine

(*1) For previous digital electronic controlled engine

(*2) For previous network system (6Y8)
(*3) Engine selection for tachmeter

USB

Main bus wire

Pigtail bus wire

System power supply

wire

Multi-hub
Single (inline) hub
Premium color gauge

Transom multi-sensor

16
17
18

Conversion harness
Conversion harness 1
Conversion harness 4
Conversion harness 5
Conversion harness 6
Conversion harness L
Twinning harness
GPS wire
Tank wire

2
3
4
5
6
7
8
10
11

Main-harness (16P)

Part name

Ref.
No.

7-46

6Y9-83688-00

6Y8-81920-01
6Y8-81920-11
6Y9-83710-01

6Y8-83553-01

6X6-8258A-10
6X6-8258A-20
6X6-8258A-30
6X6-8258A-40
6Y9-83553-00
6Y9-83553-10
6Y9-83553-40
6Y9-83553-50
6Y9-83553-60
6X6-8258A-L0
6X6-8258A-U0
6Y9-8356N-01
6Y9-8356N-10
6Y8-82553-01
6Y8-82553-50
6Y8-82553-11
6Y8-82553-21
6Y8-82553-31
6Y8-82553-41
6Y8-82521-01
6Y8-82521-11
6Y8-82521-21
6Y8-82521-31
6Y8-82521-41
6Y8-82521-51

Part No.

Depth, speed, water temp,

w/ 4.9 m wire

w/ resistor cap, Black

w/ resistor, 4-6P, White
w/ screen cover

w/ 10-amps fuse, 2.4 m, 8 ft

7 m, 23 ft
8 m, 26 ft
10 m, 32 ft
12 m, 39 ft
0.3 m, 1 ft
0.3 m, 1 ft
0.15 m, 0.5 ft
0.16 m, 0.5 ft
0.24 m, 0.8 ft
0.15 m, 0.5 ft
0.1 m, 4 in
0.35 m, 1.1 ft
0.27 m, 0.9 ft
1 ft
10 ft
15 ft
20 ft
25 ft
30 ft
1 ft
2 ft
3 ft
6 ft
9 ft
12 ft

Remarks

Quad RC
Quad RC
Quad IG SW assy
Quad start/stop SW
Quad start/stop SW
Station selector SW
Emergency stop SW
2nd helm harness
(3-12P)

37
38
50
51
52
55
56
57

2nd helm harness

(3/4/6P)

Analog meter trim/oil

lead

Analog meter harness

2nd helm harness

(2-12P)

Analog trim gauge

Analog tachometer

Immobilizer unit

Ref.
Part name
No.
20 NMEA 2000 gateway
21 Analog gauge interface
Remarks

EU
US, OCE
JP
Black panel
White panel
Black panel
White panel
2.5 m, 8 ft
5 m, 16 ft
6 m, 20 ft
7 m, 23 ft
8 m, 26 ft
9 m, 31 ft
10.5 m, 33 ft
5m
8m
12 m
5m
8m
12 m
Single & dual station/ Main helm
Single & dual station/ 2nd helm
Main helm, P/CP/CS/S
2nd helm, P/CP
2nd helm, S/CS
For dual station, quad engine
For quad engine
5m
8m
12 m

Part No.
6Y9-8A2D0-00
6Y9-8A2D0-10
6Y8-86254-02
6Y8-86254-20
6Y8-86254-30
6Y7-83540-80
6Y7-83540-90
6Y7-83670-40
6Y7-83670-50
6Y5-83553-00
6Y5-83653-00
6Y5-83653-10
6Y5-83653-20
6Y5-83653-30
6Y5-83653-40
6Y5-83653-50
6X6-8258A-B1
6X6-8258A-D1
6X6-8258A-F1
6X6-8258A-G0
6X6-8258A-H0
6X6-8258A-J0
6X6-48209-01
6X6-48209-11
6X6-82570-M0
6X6-82570-J0
6X6-82570-K0
6X6-82570-L0
6X6-82570-V0
6X6-8258A-R0
6X6-8258A-S0
6X6-8258A-T0

NETWORK WIRING DIAGRAMS

DUAL STATION W/ 6Y9 GAUGE QUAD ENGINE

(FOR F/LF225CA, F/LF250CA, F/LF300CA, F/LF350CA)

BATTERY

RECOMMENDED BATTERY ................................................................... 8-2

BATTERY CABLE LENGTH .................................................................... 8-3
BATTERY WIRING ................................................................................... 8-4
ISOLATOR EQUIPPED MODEL (ABOVE 150PS MODEL)................. 8-4
EXAMPLE FOR BATTERY CABLE WIRING (TWIN ENGINE) ............ 8-5
RECOMMENDED EXTENSION LENGTH OF BATTERY CABLES..... 8-6
RECOMMENDED BATTERY SWITCH CAPACITY ............................. 8-9
BATTERY CHARGING CAPABILITY ................................................... 8-9

8-1

RECOMMENDED BATTERY
Battery is an important material to obtain sure engine start and to maintain engine operation performance.
Therefore, exact battery selection is required on a model.
Using maintenance-free sealed and/or gel cell batteries are not recommended, because they may
not be compatible with Yamahas charging system.
Read carefully the labels attached to the battery and follow the instruction supplied by battery manufacturer when you treat or maintain the battery.

NOTICE
Do not use a battery which does not meet with the specified capacity.
If different battery from the specification is used, the electrical system may perform poorly
and/or overloaded, causing electrical system damage.
Select a suitable battery as shown in the table below.
Global Model

US & Canada Model

F8 up to F/FT25
6 up to 55 (Except E/40X, 55D)

F8 up to F/T25
6 up to 50

F30 up to F/FL115
E/40X, 55D &
Carbureted 60 up to 225 (V6-2.6L)

F30 up to F/LF115
Carbureted 60 up to 200 (V6-2.6L)

F/FL150 up to F/FL250 (V6-3.3L)

HPDI (V6-2.6L, V6-3.3L)
L/250G

F/LF150 up to F/LF250 (V6-3.3L)

HPDI (V6-2.6L, V6-3.3L)

F200D, F225D, F250C, F225G,

F250F, F275A
F/FL225F, F/FL250D, F/FL300B
(V6-4.2L)

VF200LA, VF225LA, VF250LA

(VMAX)
F/LF225CA, F/LF250CA,
F/LF300CA (V6-4.2L)

F/FL300A, F/FL350A (V8)

F/LF350CA (V8)

Unit
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS

Min. battery rating

245 amps
323 amps
52 min
347 amps
40 Ah
32C24 65D31
380 amps
502 amps
124 min
430 amps
70 Ah
65D31 95E41
512 amps
675 amps
182 min
711 amps
100 Ah
95E41 115F51
680 amps
770 amps
160 min
640 amps
80 Ah
105D31 130E41
700 amps
900 amps
170 min
670 amps
110 Ah
120E41 130E41

* Under severe cold condition, twin or more battery with parallel wiring is required to start the engine.
CCA: Cold Cranking Ampere
SAE: Society of Automotive Engineers
MCA: Marine Cranking Ampere
ABYC: American Boat and Yacht Council

RC: Reserve Capacity Minutes

EN: European Norm (European Standard)
IEC: International Electro-technical Commission
JIS: Japanese Industrial Standard

8-2

BATTERY CABLE LENGTH

The following table shows the battery cable length to the () terminal from the grommet of outboard
motor.
The (+) terminal is usually 100 mm (4 inches) longer than the () terminal.
Global Model

US Model

Canada Model

E/40J, EK40J
55B
40V, 50H
FT50C, F50D
F40D, F50F, FT50G, F60C, FT60D
F30B, F40F

Cable length (L)

1.43 m

4.7 ft

1.47 m

4.8 ft

F50, T50, F60, T60

50
F50A, T50A, F60A,
T60A

1.64 m

5.4 ft

US, CA & ANZ:

2.24 m, 7.3 ft

F40A

F30A, F40A

1.64 m

5.4 ft

US, CA, ANZ & JP:

2.24 m, 7.3 ft

9.9, 15

1.67 m

5.5 ft

E/40X
9.9F, 15F
F20D, F25D

F25A

1.67 m

5.5 ft

FT25F

T25A

2.24 m

7.3 ft

1.70 m

5.6 ft

E/25B, E/30H
30D
6C, 8C
20D, 25N,
F8C, FT8D

F8A

6, 8
20, 25
F8A, T8A

1.75 m

5.7 ft

F15C, F20B

F15A, F20A

1.77 m

5.8 ft

1.78 m

5.8 ft

2.14 m

7.0 ft

F70A

2.24 m

7.3 ft

2.42 m

7.9 ft

60F, 70B
75C, 90A
F70A, F40G

F70A

115B, 140B
Carbureted V6-2.6L w/ oil injection

Carbureted V6-2.6L
w/ oil injection

2.59 m

8.5 ft

HPDI V6-2.6L
F/FL150A, F/FL150B

HPDI V6-2.6L
F/LF150A

2.61 m

8.6 ft

FT8D (RC), F9.9F, FT9.9G

F9.9A, T9.9A

T8A (RC), F9.9A,

T9.9A

2.65 m

8.7 ft

2.76 m

9.1 ft

2.83 m

9.3 ft

115C, 130B

2.88 m

9.4 ft

L/150A, L/200A

2.93 m

9.6 ft

L/250G

3.31 m

10.9 ft

E115A
F95A, F100B
F75B, F80B, F90B, F100D, F75C, F80C
F/FL115A

Remarks

F75, F90
F/LF115A

F75A, F90A
F/LF115A

F/FL200B, F/FL200C, F/FL225B, F225C,

F/FL250A, F/FL250G
F200D, F225D, F250C, F225G, F250F,
F275A
F/FL225F, F/FL250D, F/FL300B

F/LF200A,
F/LF225A, F/LF250
VF200LA,
VF225LA, VF250LA
F/LF225CA,
F/LF250CA,
F/LF300CA

F/LF200A
VF200LA,
VF225LA, VF250LA
F/LF225CA,
F/LF250CA,
F/LF300CA

3.50 m

11.5 ft

F/FL300A, F/FL350A

F/LF350CA

3.56 m

11.7 ft

100 mm (4 in.)

(L)

8-3

JP: 2.08 m, 6.7 ft

US & ANZ: 2.38 m,

7.8 ft

BATTERY WIRING
ISOLATOR EQUIPPED MODEL (ABOVE
150PS MODEL)

WARNING
Battery electrolyte is poisonous and dangerous, causing severe burns, etc. It contains sulfuric acid. Avoid contact with skin,
eyes, or clothing.
Read the safety and maintenance instructions which are accompaniment to your
battery.
Do not coil and/or loop the battery cable even
if the cable has surplus for routing.

When one battery is used, connect the large

original red cable and the isolator cable to the
(+) terminal.
The isolator cable has to connect to (+) battery
terminal, because an accidental contact of the
isolator cable to the ground will form a short
circuit and may cause a fire.

When using a house battery, its capacity is

recommended the same as the main battery
for cranking the engine.
For twin-battery wiring, a battery cable for ()
terminal has to connect between the house
battery and the main battery.
The battery cable size has to be equivalent to
the main battery cable.
On a model, the optional isolated charging
cable is available for a house battery.

If plural batteries are used for multi-engine

installation, all () terminals should connect to
the same ground.
Obey the local over-current protection compliance such as ABYC part E-11 for wiring the
battery cables and connecting to a conductor.
Part No.
68F-81949-02
69J-81949-02
6CE-81949-00

Length
2.7 m
9 ft
3.8 m
13 ft
3.8 m
13 ft

* Follow the local rules and/or regulations if your

battery is scrapped.

Remarks
For HPDI, F150 and above
* Except F225 F300 offshore (V6-4.2L)
For F225, F250, F300 offshore (V6-4.2L) special

8-4

BATTERY WIRING
EXAMPLE FOR BATTERY CABLE WIRING (TWIN ENGINE)
Isolator cable
Battery cable (+)
Battery cable ()

Motor
(S)

Motor
(P)

Fuse

Main battery (S)

Fuse

House battery

Main battery (P)

Motor
(S)

Motor
(P)

Fuse

Main battery (S)

Applicable model:
* F150 (2009 and later model)
* F200/225 (V6-3.3L)
* F200/225/250 (V6-3.3L w/ VCT)
(2008 and later model)
* F225/250/300 (V6-4.2L)
* F300/350V8

House battery (S)

Fuse

House battery (P)

8-5

Main battery (P)

Applicable model:
Isolator equipped model

BATTERY WIRING
RECOMMENDED EXTENSION LENGTH OF BATTERY CABLES
If the battery cables are extended, follow the requirements in the table due to the battery capacity,
cable size and atmosphere temperature.
The length of extension battery cable means the total length of (+) and () cables.
Be sure to select an extension battery cable and a terminal that meet ABYC requirements or equivalents.
Use a best-suited stud to the terminal size.
Give solder to the connection of terminals and cables to prevent them from corroding.
Coiling and/or looping battery cable should be inhibited because of a power loss.

NOTICE
Do not exceed the recommended extension length of battery cable.
Otherwise, the electrical system can allow poor performance or damage.

Applicable models

Carbureted 150 225

(V6-2.6L)
Four stroke 115

Four stroke 150

HPDI (V6-2.6L)

Carbureted 250 (V6-3.1L)

HPDI (V6-3.3L)
Four stroke 200, 225, 250
(V6-3.3L)

Four stroke VMAX200, 225,

250 (V6-4.2L)
F225G, F250F, F275A

Atmosphere temperature is 0C (32F) and above

Battery
Maximum total extension length
AWG4
AWG2
AWG1/0
AWG2/0
Unit
Minimum rating
20 mm2
30 mm2
50 mm2
60mm2
CCA/SAE
380 amps
MCA/ABYC
502 amps
RC/SAE
124 min
3.9 m
6.7 m
10.3 m

13 ft
22 ft
34 ft
CCA/EN
430 amps
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS

70 Ah
65D31
512 amps
675 amps
182 min
711 amps
100 Ah
95E41
512 amps
675 amps
182 min
711 amps
100 Ah
95E41
512 amps
675 amps
182 min
711 amps
100 Ah
95E41
700 amps
900 amps
220 min
670 amps
110 Ah
120E41

6.0 m
20 ft

10.0 m
33 ft

16.0 m
52 ft

8.3 m
27 ft

14.2 m
47 ft

22. m
72 ft

5.4 m
18 ft

9.2 m
30 ft

14.2 m
47 ft

4.2 m
14 ft

6.3 m
21 ft

10.5 m
35 ft

12.6 m
42 ft

To be continued.

8-6

BATTERY WIRING
RECOMMENDED EXTENSION LENGTH OF BATTERY CABLES

Applicable models

Four stroke 225, 250, 300 offshore model (V6-4.2L)

Four stroke 300 (V8), 350

Applicable models

Atmosphere temperature is 0C (32F) and above

Battery
Maximum total extension length
AWG2
AWG1/0
AWG2/0
AWG4
Unit
Minimum rating
30 mm2
50 mm2
60mm2
20 mm2
CCA/SAE
700 amps
MCA/ABYC
900 amps
RC/SAE
220 min
5m
7.6 m
12.6 m
15.2 m
17 ft
25 ft
42 ft
51 ft
CCA/EN
670 amps
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS

110 Ah
120E41
800 amps
960 amps
230 min
750 amps
120 Ah
130E41
700 amps
900 amps
170 min
670 amps
110 Ah
120E41

HPDI (V6-3.3L)

Four stroke 200, 225, 250

(V6-3.3L)

8.3 m
28 ft

13.8 m
46 ft

16.6 m
55 ft

3.8 m
12 ft

6.4 m
21 ft

10.0 m
33 ft

11.8 m
39 ft

Atmosphere temperature is below 0C (32F)

Battery
Maximum total extension length
AWG2
AWG1/0
AWG2/0
AWG4
Unit
Minimum rating
30 mm2
50 mm2
60mm2
20 mm2

Carbureted 150 225

(V6-2.6L)
Carbureted 250 (V6-3.1L)
Four stroke 115, 150 &
VMAX (SHO)

HPDI (V6-2.6L)

5.5 m
18 ft

Cannot be extended

CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS

696 amps
856 amps
167 min
711 amps
83 Ah
95D31
696 amps
856 amps
167 min
711 amps
83 Ah
95D31
696 amps
856 amps
167 min
711 amps
83 Ah
95D31

2.8 m
9 ft

4.8 m
16 ft

7.4 m
24 ft

3.9 m
13 ft

6.7 m
22 ft

10.4 m
34 ft

3.5 m
11 ft

6m
20 ft

9.2 m
30 ft

To be continued.

8-7

BATTERY WIRING
RECOMMENDED EXTENSION LENGTH OF BATTERY CABLES

Applicable models

Atmosphere temperature is below 0C (32F)

Battery
Maximum total extension length
AWG2
AWG1/0
AWG2/0
AWG4
Unit
Minimum rating
30 mm2
50 mm2
60mm2
20 mm2
CCA/SAE
700 amps
MCA/ABYC
900 amps
RC/SAE
220 min
2.1 m
3.2 m
5.3 m
6.4 m
7 ft
11 ft
18 ft
21 ft
CCA/EN
670 amps

20HR/IEC
JIS
Four stroke 225, 250, 300 offshore model (V6-4.2L)
CCA/SAE
MCA/ABYC
RC/SAE
CCA/EN
20HR/IEC
JIS
CCA/SAE
MCA/ABYC
Four stroke 300 (V8), 350
RC/SAE
CCA/EN
* Twin-battery with parallel wiring 20HR/IEC
is required under cold condition. JIS
AWG
CCA
SAE
MCA
ABYC
RC
EN
IEC
JIS

:
:
:
:
:
:
:
:
:

110 Ah
120E41
800 amps
960 amps
230 min
750 amps
120 Ah
130E41
700 amps (2)
900 amps (2)
170 min (2)
670 amps (2)
110 Ah (2)
120E41 (2)

American Wire Gauge, **mm2: Conductor cross-section

Cold Cranking Ampere
Society of Automotive Engineers
Marine Cranking Ampere
American Boat and Yacht Council
Reserve Capacity Minutes
European Norm (European Standard)
International Electro-technical Commission
Japanese Industrial Standard

2.3 m
8 ft

3.5 m
12 ft

5.8 m
19 ft

7m
23 ft

1.2 m
4 ft

2.2 m
7 ft

3.6 m
12 ft

4.2 m
14 ft

Battery Switch
ON
OFF

Battery

Extension Battery Cable

8-8

Original Battery Cable

BATTERY WIRING
RECOMMENDED BATTERY SWITCH CAPACITY
Select a battery switch which covers the starting ampere draw in the table.
If the battery cable connection points are increased, electric resistance will increase and performance for starting will decrease.
If a lot of connections such as an automatic battery distribution system is used, the total electric
resistance of connections has to be 0.5 M and less.
Applicable models
Carbureted 150 225 (2.6L)
F115
HPDI (2.6L)
F200 F250 (3.3L)
HPDI (3.3L)
F150
F300 F350 (V8)
F200 F300 (4.2L)

Starting current
(Amperes)
195
260
216
220
254
250
410
250

Starting
current
(Amperes)

BATTERY CHARGING CAPABILITY

The following chart shows the net capability to charge a battery.
In case of the isolator equipped model, the capability is the total of main and isolator lines.
* When the temperature of stator coil has risen, the battery charging capability tends to drop.
Global model
F25D, FT25F, F20D
F30B, F40F
F50F, FT50G, F60C, FT60D, F40D,
F70A, F40G
F75B, F75C, F80B, F80C, F90B,
F100D
F/FL115A
F/FL150A, F/FL150B
F/FL200B, F/FL200C, F/FL225B,
F225C, F/FL250A, F/FL250B,
F/FL250G
F200D, F225D, F250C, F225G,
F250F, F275A
F/FL225F, F/FL250D, F/FL300B
F/FL300A, F/FL350A

US & Canada model

F25A, T25A
F30A, F40A

Net capability
13 amps
13 amps

Note

F50, T50, F60, T60, F70A

8.5 amps

F75, F90

19 amps

F/LF115A
F/LF150A

16 amps
21 amps

F/LF200A, F/LF225A, F/LF250

27 amps

V6-3.3L (VCT)

VF200LA, VF225LA, VF250LA

35 amps

VMAX (SHO)

55 amps

V6-4.2L

33 amps

V8-5.3L

F/LF225CA, F/LF250CA,
F/LF300CA
F/LF350CA

8-9

MEMO

APPENDIX

MODEL NAME DESIGNATION................................................................ 9-3

GLOBAL MODEL IDENTIFICATION (EXCEPT US AND CANADA).... 9-3
US & CANADA MODEL IDENTIFICATION .......................................... 9-4
US & CANADA NEW MODEL IDENTIFICATION CODE ..................... 9-4
FUEL SYSTEM VACUUM PRESSURE STANDARD .............................. 9-5
FUEL HOSE ROUTING RESISTANCE MEASURING METHOD ........ 9-5
LOWEST VACUUM PRESSURE STANDARD .................................... 9-6
PORTABLE FUEL TANKS (TYPICAL) .................................................... 9-7
FUEL PIPES (TYPICAL)........................................................................... 9-8
PRIMARY PUMP (TYPICAL).................................................................... 9-8
PRE-DELIVERY INSPECTION (PDI) CHECKS ....................................... 9-9
CONVENTIONAL RIGGING KIT CONTENTS ....................................... 9-10
DIGITAL TACHOMETER KIT ............................................................. 9-10
DIGITAL TACHOMETER AND SPEEDOMETER KIT........................ 9-10
TWIN-MOTOR KIT ............................................................................. 9-11
REMOTE OIL TANK KIT (FOR 2-STROKE ENGINE)........................ 9-12
DIGITAL NETWORK GAUGE RIGGING KIT CONTENTS .................... 9-13
SQUARE STYLE GAUGE RIGGING KIT FOR US & CANADA ......... 9-13
ROUND STYLE GAUGE RIGGING KIT FOR US & CANADA ........... 9-15
SQUARE STYLE GAUGE RIGGING KIT FOR EUROPE .................. 9-17
ROUND STYLE GAUGE RIGGING KIT FOR EUROPE .................... 9-21
TRANSOM RIGGING KIT FOR EUROPE.......................................... 9-23
SQUARE STYLE GAUGE RIGGING KIT FOR ANZ .......................... 9-24
SQUARE STYLE GAUGE RIGGING KIT FOR JAPAN...................... 9-25
ROUND STYLE GAUGE RIGGING KIT FOR JAPAN........................ 9-26
IMMOBILIZER RIGGING KIT CONTENTS ............................................ 9-27
IMMOBILIZER KIT 1 (FOR US, ANZ, CRB) ....................................... 9-27
IMMOBILIZER KIT 2 (FOR JPN) ........................................................ 9-27
SINGLE ENGINE GAUGE KIT FOR IMMOBILIZER
(FOR EU, ANZ, JPN, GEN) ........................................................... 9-27
TWIN ENGINE GAUGE KIT FOR IMMOBILIZER .............................. 9-28
To be continued.

9-1

APPENDIX

DIGITAL NETWORK PREMIUM GAUGE RIGGING KIT CONTENTS .. 9-29

SINGLE ENGINE PREMIUM GAUGE KIT ......................................... 9-29
TWIN ENGINE PREMIUM GAUGE KIT ............................................. 9-30
MAIN HELM SW PANEL TWIN ENGINE KIT (FOR US, CAN) .......... 9-30
MAIN HELM SW PANEL TRIPLE ENGINE KIT (FOR US, CAN)....... 9-30
2ND HELM SW PANEL SINGLE ENGINE KIT (FOR US, CAN)........ 9-30
2ND HELM SW PANEL TWIN ENGINE KIT (FOR US, CAN)............ 9-31
2ND HELM SW PANEL TRIPLE ENGINE KIT (FOR US, CAN) ........ 9-31
OTHER RIGGING KIT CONTENTS........................................................ 9-32
TILT LIMIT SWITCH KIT (FOR US, CA, EU, ANZ, RUS, JPN).......... 9-32
LIGHTING COIL KIT (FOR EU, CA, JPN) .......................................... 9-32
2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER.. 9-33

9-2

MODEL NAME DESIGNATION

The model primary ID that consists of the model name, prefix model code, transom length and serial
number is stamped on the label attached to the clamp bracket.
* The serial number is a 7-digit sequential numbering scheme irrespective of model variation and transom
length.

GLOBAL MODEL IDENTIFICATION (EXCEPT US AND CANADA)

Transom height

Model name

Serial number

Prefix model code

6AX

FL350AET
U

YAMAHA MOTOR CO., LTD.

MADE IN JAPAN
PAYS D'ORIGINE JAPON

The model identification has been standardized as follows since 1998 model year.
FL
Model category
Non: 2-stroke STD engine
D: Twin rotating prop
E: Enduro series
F: 4-stroke engine
K: Kerosene engine
L: L/H rotation series
T: High thrust (4-stroke)
Z: HPDI engine

350
Output
(PS)
2
to
350

A
Model
generation
A
B
C
D
F
G
H
J
L
N
P
Q
R
S
T
U
V
X
Y
(Repeat
from A)

ET
Model variation
Level 1: Start system
M: Manual start
E: Electric start
W: Electric & Manual start
Level 2: Control system
Non: Remote control
H: Tiller handle
C: Remote control w/ tiller handle
Level 3: Trim & Tilt system
Non: Manual tilt
D: Hydro tilt
P: Power tilt
T: Power trim & tilt
Level 4: Lubrication system
[2-stroke engine]
Non: Premixed fuel engine
O: Oil injection engine

9-3

U
Transom height
(Drive shaft length)
S (15)
L (20)
Y (22.5)
X (25)
U (30)

MODEL NAME DESIGNATION

US & CANADA MODEL IDENTIFICATION
Transom height

Model name

Serial number

Prefix model code

LF250TUR
U

6P2

YAMAHA MOTOR CO., LTD.

MADE IN JAPAN
PAYS D'ORIGINE JAPON

The model identification has been standardized as follows since 1984 model year.
LF

250

Model category

Output
(PS)

Trim & Tilt/

Starting system

Transom height
(Drive shaft length)

Control system

Non: 2-stroke STD engine

B: Inshore series
C: Commercial
(premixed fuel)
D: Twin rotating prop
E: Enduro series
F: 4-stroke engine
L: L/H rotation series
P: Pro series
S: Saltwater series
T: High thrust (4-stroke)
V: VMAX series
X: Electronic fuel injection
engine
Z: HPDI engine

2.5
to
350

T: Power trim &

tilt/ Electric
start
P: Power tilt/
Electric start
E: Manual tilt/
Electric start
M: Manual tilt/
Manual start

S (15)
L (20)
X (25)
U (30)
J (Jet drive)

R: Remote control
H: Tiller handle

Model year code

US CA
N N 1984
K
K 1985
J
J 1986
H H 1987
G G 1988
F
F 1989
D D 1990
P
P 1991
Q Q 1992
R R 1993
S
S 1994
T
T 1995
U U 1996
V
V 1997
W W 1998
X
X 1999
Y
Y 2000
Z
Z 2001
A
A 2002
B
B 2003
C C 2004
D D 2005
2006
F 2007
G 2008
H 2009
(*1)

(*1) 2010 and later

US & CANADA NEW MODEL IDENTIFICATION CODE

US and Canada model ID code will be revised from all new models (starting with fuel injection F40
which has been released on fall 2008).
All current Yamaha outboard motors will continue to use the current model ID code system.
Generation codes will change at such time new Yamaha outboards models are introduced.
Model ID code will utilize this new and simpler format at that time.
F
Model
category
F: 4-stroke
L: L/H rotation
series
V: VMAX series
T: High thrust
(4-stroke)

E
Starting method
Horsepower Shaft length
PTT
Blank: PTT & E-start
S: 15
P:
PT & E-start
L: 20
E:
Electric start
X: 25
M:
Manual start
U: 30
J: Jet

9-4

Control method

Generation

Blank: Remote control

H:
Tiller handle
C:
Command Link
control (DERC)

A: 1st change on motor

B: 2nd change on motor
C: 3rd change on motor
etc.

FUEL SYSTEM VACUUM PRESSURE STANDARD

In high-horsepower V6 models, the required fuel flow volume at normal operation may become
insufficient and the engines reliability may decrease, due to the routing resistance of the fuel hoses
and the installation of a larger fuel filter. For the fuel hose routing standard, be sure to adequately
inform the service network as well as the boat manufactures.

FUEL HOSE ROUTING RESISTANCE MEASURING METHOD

(2)
Short clear hose
to fuel filter
Hose to gauge

(3)

(1)

(4)

Hose to fuel pump

(5)

Ref.No.
(1)

Description
HOSE JOINT

Part No.
6E5-24378-00

Qty
1

(2)

HOSE

Commercially obtainable

(3)

HOSE

61A-24313-00

(4)

CLAMP
VACUUM PRESSURE GAUGE

90465-11M10

Commercially obtainable

(5)

Remark
50 mm (2.0 in.) clear hose (inside diameter is 8
mm) used to check for air bubbles
L = 300 mm (11.8 in.)
(250 to 400 mm (9.8 to 15.7 in.) is acceptable)
Specified pressure range: 101 kPa
(760 mmHg) to 0

1. Connect a 50 mm (2.0 in.) clear hose (market obtainable) (2) to the top nipple of the hose joint (1).
2. Connect the other end of the clear hose (2) to the engine fuel filter outlet.
3. Connect the fuel hose (3) to the center nipple of the hose joint, and the other end of the fuel hose
to a vacuum gauge (commercially obtainable) (5).
4. Connect the fuel pump hose to the hose joint, and then fasten all hose connections with clamps
(4).
5. Start the engine, let it warm up, and then measure the vacuum pressure at idle and wide-open
throttle, after the breaking-in period has been completed.
6. Measure that the vacuum pressure is within specification, and then route the fuel hoses to their
original positions.
To be continued.

9-5

FUEL SYSTEM VACUUM PRESSURE STANDARD

LOWEST VACUUM PRESSURE STANDARD
The lowest vacuum pressure must be fulfilled as below at an atmospheric temperature of 20C
(68F) and higher.
Idle: 0 kPa to 10.7 kPa (80 mmHg)
WOT: 10.7 kPa (80 mmHg) to 20 kPa (150 mmHg)
* Be sure to measure the vacuum pressure which is within specification at the idle and the wide-open throttle,
after the breaking-in period has been completed.
Engine breaking-in operating conditions
^ 2-stroke carbureted models
^ 2-stroke electronic fuel injected models
^ HPDI models
^ 4-stroke models

: 10 hours
: Use a 25:1 pre-mixed fuel.
: Use a 50:1 pre-mixed fuel, and supply with oil injection.
: Use straight gasoline (only supply with oil injection)
: Use straight gasoline.

Larger fuel filters installed onto a boat may lower the fuel vacuum pressure to 20.0 kPa (15 mmHg) and
under. Therefore, follow the instructions mentioned above to rig the boat properly so that the fuel vacuum
pressure is within specification.
If the vacuum pressure does not surpass 10.7 kPa (80 mmHg) at wide-open throttle, use a clear hose to
check fuel for air bubbles mixed.

9-6

PORTABLE FUEL TANKS (TYPICAL)

265 (10.4)

233 (9.2)

mm (in.)

545 (21.5)

1
2
3

6YL-24201-05
6YL-F4201-05
6YL-24201-20
6YL-F4201-20
6YJ-24201-40
6YJ-24201-80
6YK-24201-03
6YK-F4201-03
6YK-24201-10
6YK-24201-21
6YK-24201-40

362 (14.3)

536 (21.1)

Part No.

252 (9.9)
455 (17.9)

233 (9.2)

mm (in.)

Ref. No.

mm (in.)

230 (9.1)
363 (14.3)

265 (10.4)

363 (14.3)

mm (in.)

230 (9.1)

mm (in.)

314 (12.4)

Capacity
L (US gal)

Material

12 (3.2)

Plastic

w/ fuel gauge

12 (3.2)

Plastic

US/CA new joint, w/ fuel gauge

24 (6.3)
24 (6.3)

Plastic
Plastic

For JPN, With JCI label, w/ fuel gauge

With tag and exclusive filler structure banning use of leaded fuel

25 (6.6)

Plastic

With fuel gauge

25 (6.6)
25 (6.6)
25 (6.6)

Plastic
Plastic
Plastic

With label and exclusive filler structure banning use of leaded fuel
For kerosene
US/CA new joint, w/ fuel gauge

Description

9-7

FUEL PIPES (TYPICAL)

(L)

(L)
Ref. No.
1
2
3

Part No.
6Y1-24306-55
6YL-24306-71
6YK-24306-71
6YK-24306-04

Hose inside diameter

6 mm
6 mm
8 mm
6 mm

Length (L)
3 m (9.8 ft)
3 m (9.8 ft)
3 m (9.8 ft)
3 m (9.8 ft)

Remarks
US/CA new joint
US/CA new joint
For kerosene models

PRIMARY PUMP (TYPICAL)

Part No.
6YK-24360-71
6YL-24360-51

Hose inside diameter

8 mm
6 mm

Remarks
Meeting with EPA regulation, Above F75

9-8

PRE-DELIVERY INSPECTION (PDI) CHECKS

Before operation, go over the checklist below to enhance customer satisfaction.
Fill in the information required.
Perform the static and dynamic checks following the items on the sheet.

L
P
M

9-9

CONVENTIONAL RIGGING KIT CONTENTS

The rigging kit is handled by Marine Sales Division of Yamaha Motor Corporation.
Thereby, Yamaha parts distribution center in Japan is out of control.
Attention to importers, the rigging kit has to purchase from Sales Division as well as outboardmotors because it is impossible to purchase from the parts route.

DIGITAL TACHOMETER KIT

US, Can.: Above 40, Above F30
Others: Above 40 (3-cyl) w/ oil injection (except 250G & L250G), Above F30
P/N: 6YR-W0035-E3
Part name
EXT wire-lead
Tachometer assy
Wire-lead

Part No.
6Y5-83653-20
6Y5-8350T-91
6Y5-83553-20

Qty
1
1
1

Remarks
7 m, 23 ft
Included instruction tag
2.5 m, 8 ft w/10 amps fuse

DIGITAL TACHOMETER AND SPEEDOMETER KIT

US, Can.: Above 40, Above F30
Others: Above 40 (3-cyl) w/ oil injection (except 250G & L250G), Above F30
P/N: 6YR-W0035-F3
Part name
Wire-lead
Tachometer assy
EXT wire-lead
Speedometer assy
Tube
Clamp
Clamp
Instruction

Part No.
6Y5-83553-N0
6Y5-8350T-91
6Y5-83653-30
6Y5-83570-S6
6Y5-83557-10
90465-11M10
90465-13M18
61A-28107-A4

Qty
1
1
1
1
1
2
10
1

Part No.
6Y5-82117-00
6Y5-8350T-91
6Y5-83553-M0
6Y5-83557-10
6Y5-83570-S6
6Y5-83653-30
90465-11M10

Qty
1
1
1
1
1
1
2

Remarks
2.5 m, 8 ft w/10 amps twin-fuse
Included instruction tag
8 m, 26 ft
Included instruction tag
8 m, 26 ft

ANZ: Fuel injected F50-F100

P/N: 6YR-W0035-T1
Part name
Wire-lead
Tachometer assy
Wire-lead
Tube
Speedometer assy
EXT wire-lead
Clamp

9-10

Remarks
30 cm, BLK
Included instruction tag
2.5 m, 8 ft w/10 amps twin-fuse
8 m, 26 ft
Included instruction tag
8 m, 26 ft

CONVENTIONAL RIGGING KIT CONTENTS

TWIN-MOTOR KIT
Above L150, Above FL/LF115
P/N: 6YR-W0035-G4
Part name
Wire-lead
Tachometer assy
EXT wire-lead
Twin-binnacle RCL box
Main wire-harness, 10-pin
Main wire-harness, 10-pin
Clamp
Twin-switch panel
Screw
Nut
Plane washer
Spring washer
Fuel mgt gauge
Wire-lead
Fuel flow sensor
Screw
Instruction

Part No.
6Y5-83553-20
6Y5-8350T-91
6Y5-83653-40
704-48207-P1
6K1-8258A-40
61B-8258A-01
90465-13M18
6K1-82570-08
90149-05M05
95380-05600
92990-05600
92990-05100
6Y5-8350F-01
6Y5-83553-F1
6Y5-85752-02
90158-06003
61B-28107-A4

9-11

Qty
1
1
1
1
1
1
10
1
4
4
4
4
1
1
2
4
1

Remarks
2.5 m, 8 ft w/10 amps fuse
Included instruction tag
9 m, 31 ft
Premium
8 m, 26 ft
9.5 m, 32 ft
With DES control unit
25 mm

Included instruction tag

8 m, 26 ft
68 mm

CONVENTIONAL RIGGING KIT CONTENTS

REMOTE OIL TANK KIT (FOR 2-STROKE ENGINE)
10.5 L (2.8 US-GAL) TANK
Global P/N: 6YR-W0035-D2
Part name
Remote oil tank assy
Remote oil tank holder
Damper
Bracket
Fuel pipe complete
Clamp
Clamp
Clamp
Washer
Nut
Bolt

Part No.
61A-21708-20
6E5-21734-01
6E5-21746-00
6E5-21798-01
6YK-24307-42
90450-10M07
90465-11M10
90465-13M11
92990-06600
95380-06600
97080-06100

Qty
1
1
2
1
1
1
1
1
2
1
1

Remarks

Part No.
61A-21708-20
6E5-21734-01
6E5-21746-00
6E5-21798-01
6Y2-24307-50
90450-10M07
90465-11M10
90465-13M11
92990-06600
95380-06600
97080-06100

Qty
1
1
2
1
1
1
1
1
2
1
1

Remarks

US & Canada P/N: 6YR-W0035-94

Part name
Remote oil tank assy
Remote oil tank holder
Damper
Bracket
Fuel pipe complete
Clamp
Clamp
Clamp
Washer
Nut
Bolt

9-12

Meeting with ABYC requirements

Part name
Speed sensor kit
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
4-P cap, WHT
SQR tachometer
SQR comb. speedometer & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Operation manual
Quick installation guide
Quick operation guide

Qty
1
1
2
1
3
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
For waterproof
For waterproof

With 10 amps fuse

Laminated card

TWIN KIT 1 (TACH, TACH, SPEED, FUEL MGT)

Kit P/N: 6Y8-WE83S-20-00
Part No.
60V-8A4L1-11
6Y8-82553-01
6Y8-82521-51
6Y8-81920-01
6Y8-82582-01
6Y8-82582-11
6Y8-8350T-01
6Y8-8350S-01
6Y8-8350F-01
6Y8-8356N-01
6Y8-83553-01
6Y8-82570-02
704-48207-P1
6K1-8258A-40
61B-8258A-01
6Y8-2819U-00
6Y8-2819K-S1
6Y8-2819U-X0

Part name
Speed sensor kit
Main bus wire, 1 ft
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
4-P cap, WHT
SQR tachometer
SQR speedometer
SQR fuel management gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Twin-switch panel
Twin-binnacle RCL box, Premium
Main harness 10-P, 26 ft
Main harness 10-P, 32 ft
Operation manual
Quick installation guide
Quick operation guide

Qty
1
1
2
3
2
3
2
1
1
1
1
1
1
1
1
1
1
1

9-13

Remarks
Refer to kit contents

With resistor cap, GRY

For waterproof
For waterproof

With 10 amps fuse

Laminated card

Part name
Speed sensor kit
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
4-P cap, WHT
SQR tachometer
SQR comb. speedometer & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Twin-switch panel
Twin-binnacle RCL box, Premium
Main harness 10-P, 26 ft
Main harness 10-P, 32 ft
Operation manual
Quick installation guide
Quick operation guide

Qty
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
For waterproof
For waterproof

With 10 amps fuse

Laminated card

TRIPLE KIT 1 (TACH, TACH, TACH, SPEED, FUEL MGT)

Kit P/N: 6Y8-WE83S-80-00
Part No.
60V-8A4L1-11
6Y8-82553-01
6Y8-82521-51
6Y8-81920-01
6Y8-82582-01
6Y8-82582-11
6Y8-8350T-01
6Y8-8350S-01
6Y8-8350F-01
6Y8-8356N-01
6Y8-83553-01
6X5-82570-01
6X5-48207-00
6K1-8258A-40
61B-8258A-01
6Y8-2819U-X0
6Y8-2819U-00

Part name
Speed sensor kit
Main bus wire, 1 ft
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
2-P cap, WHT
SQR tachometer
SQR speedometer
SQR fuel management gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Triple-switch panel
Triple-binnacle RCL box, Premium
Main harness 10-P, 26 ft
Main harness 10-P, 32 ft
Quick operation guide
Operation manual

Qty
1
1
3
3
2
1
3
1
1
1
1
1
1
1
2
1
1

9-14

Remarks
Refer to kit contents

With resistor cap, GRY

For waterproof
For waterproof

With 10 amps fuse

Laminated card

Part name
Speed sensor kit
Main bus wire, 1 ft
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
2-P cap, WHT
SQR tachometer
SQR speedometer
SQR fuel management gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Triple-switch panel
Main harness 10-P, 26 ft
Main harness 10-P, 32 ft
Quick operation guide
Operation manual

Qty
1
1
3
3
2
1
3
1
1
1
1
1
1
2
1
1

Remarks
Refer to kit contents

With resistor cap, GRY

For waterproof
For waterproof

With 10 amps fuse

Laminated card

ROUND STYLE GAUGE RIGGING KIT FOR US & CANADA

SINGLE KIT 1 (TACH)
Kit P/N: 6Y8-WE83R-60-00
Part No.
6Y8-82521-51
6Y8-81920-11
6Y8-81920-01
6Y8-83553-01
6Y8-82521-11
6Y8-8350T-11
6Y8-82582-11
6Y8-2819V-00
6Y8-2819K-R1
6Y8-2819V-X0

Part name
Pigtail bus wire, 12 ft
Single-hub
Multi-hub
PWR supply wire, 8 ft
Pigtail bus wire, 2 ft
RND tachometer
4-P cap, WHT
Operation manual
Quick installation guide
Quick operation guide

Qty
1
1
1
1
1
1
2
1
1
1

9-15

Remarks
With resistor
With resistor cap, GRY
With 10 amps fuse

For waterproof

Laminated card

Part name
Speed sensor kit
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
4-P cap, WHT
RND tachometer
RND comb. speedometer & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Operation manual
Quick installation guide
Quick operation guide

Qty
1
1
2
1
3
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
For waterproof
For waterproof

With 10 amps fuse

Laminated card

TWIN KIT (TACH, TACH, SPEED/FUEL MGT)

Kit P/N: 6Y8-WE83S-50-00
Part No.
60V-8A4L1-11
6Y8-82521-51
6Y8-81920-01
6Y8-82582-01
6Y8-82582-11
6Y8-8350T-11
6Y8-83500-11
6Y8-8356N-01
6Y8-83553-01
6Y8-82570-02
704-48207-P1
6K1-8258A-40
61B-8258A-01
6Y8-2819U-00
6Y8-2819K-R1
6Y8-2819V-X0

Part name
Speed sensor kit
Pigtail bus wire, 12 ft
Multi-hub
2-P cap, RED
4-P cap, WHT
RND tachometer
RND comb. speedometer & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Twin-switch panel
Twin-binnacle RCL box, Premium
Main harness 10-P, 26 ft
Main harness 10-P, 32 ft
Operation manual
Quick installation guide
Quick operation guide

9-16

Qty
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
For waterproof
For waterproof

With 10 amps fuse

Laminated card

Part name
Speed sensor kit
Multi-hub
Single-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Main bus wire, 20 ft
4-pin cap, WHT
SQR comb. speedometer & fuel mgt gauge
SQR tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire
Quick operation guide
Quick installation guide
Operation manual 1
Operation manual 2

Qty
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
With resistor

For waterproof

With 10 amps fuse

SINGLE KIT (TACH, SPEED/ FUEL MGT) w/o Transom Wire Harness
Kit P/N: 6Y8-W0035-20
Part No.
6Y8-82521-11
6Y8-81920-01
6Y8-82582-11
6Y8-8350T-01
6Y8-83500-01
6Y8-8356N-01
6Y8-83553-01
6Y8-2819U-70
6Y8-2819U-80
6Y8-2819K-S1
6Y8-2819U-X0

Part name
Pigtail bus wire, 2 ft
Multi-hub
4-pin cap, WHT
SQR tachometer
SQR comb. Speedometer & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Operation manual 1
Operation manual 2
Quick installation guide
Quick operation guide

9-17

Qty
2
1
1
1
1
1
1
1
1
1
1

Remarks
With resistor cap, GRY
For waterproof

With 10 amps fuse

Part name
Speed sensor kit
Main wire-harness 10-pin, 32 ft
Main wire-harness 10-pin, 26 ft
Multi-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Pigtail bus wire, 9 ft
Main bus wire, 1 ft
Main bus wire, 25 ft
2-pin cap, RED
4-pin cap, WHT
SQR fuel mgt gauge
SQR speedometer
SQR tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire
Twin-binnacle RCL box, Premium
Twin-switch panel
Screw, 25 mm
Nut
PLN washer
SRG washer
Quick operation guide
Quick installation guide
Operation manual 1
Operation manual 2

Qty
1
1
1
3
4
1
1
1
1
2
3
1
1
2
1
1
1
1
4
4
4
4
1
1
1
1

9-18

Remarks
Refer to kit contents

With resistor cap, GRY

For waterproof
For waterproof

With 10 amps fuse

Part name
Main bus wire, 1 ft
Pigtail bus wire, 2 ft
Multi-hub
2-pin cap, RED
4-pin cap, WHT
SQR tachometer
SQR speedometer
SQR fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Operation manual 1
Operation manual 2
Quick installation guide
Quick operation guide

Qty
1
4
2
1
2
2
1
1
1
1
1
1
1
1

9-19

Remarks

With resistor cap, GRY

For waterproof
For waterproof

With 10 amps fuse

Part name
Tachometer
GPS/ Fuel tank wire
Comb. Speed/ fuel mgt gauge
Multi hub
Resistor cap
Pigtail bus wire, 2ft
Pigtail bus wire, 6ft
PWR supply wire, 8ft
Switch panel
Main wire harness, 10m
Quick installation manual
Quick reference guide

Qty
1
1
1
1
1
2
1
1
1
1
1
1

Remarks
Square style
Square style
Gray, 6-pin

With 10 amps fuse

Single

F350 TWIN KIT (TACH, TACH, SPEED, FUEL MGT)

KIT P/N: 6X6-W0035-11
Part No.
6Y8-8350T-01
6Y8-8350S-01
6Y8-8356N-01
6Y8-8350F-01
6Y8-81920-01
6Y8-82553-01
6Y8-82521-11
6Y8-82521-31
6Y8-83553-01
6Y8-82582-01
6Y8-82570-02
6X6-8258A-40
6X6-2819K-S1
6Y8-2819U-X0

Part name
Tachometer
Speedometer
GPS/ Fuel tank wire
Fuel mgt gauge
Multi hub
Main bus wire, 1ft
Pigtail bus wire, 2ft
Pigtail bus wire, 6ft
PWR supply wire, 8ft
2-P cap, RED
Switch panel
Main wire harness, 12m
Quick installation manual
Quick reference guide

Qty
2
1
1
1
2
1
4
2
1
1
1
2
1
1

9-20

Remarks
Square style
Square style
Square style

With 10 amps fuse

For waterproof
Twin

Part name
Pigtail bus wire, 9 ft
Main bus wire, 20 ft
Single-hub
Pigtail bus wire, 2 ft
Multi-hub
4-pin cap
RND tachometer
PWR supply wire, 8 ft

Qty
1
1
1
1
1
2
1
1

Remarks

With resistor
With resistor cap, GRY
For waterproof
With 10 amps fuse

SINGLE KIT 1 (TACH) w/o Transom Wire Harness

Kit P/N: 6Y8-W0035-00
Part No.
6Y8-82521-11
6Y8-81920-01
6Y8-82582-11
6Y8-8350T-11
6Y8-83553-01

Part name
Pigtail bus wire, 2 ft
Multi-hub
4-pin cap, WHT
RND tachometer
PWR supply wire, 8 ft

Qty
1
1
2
1
1

9-21

Remarks
With resistor cap, GRY
For waterproof
With 10 amps fuse

Part name
Speed sensor kit
Multi-hub
Single-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Main bus wire, 20 ft
4-pin cap, WHT
RND comb. speedometer & fuel mgt gauge
RND tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire
Quick operation guide
Quick installation guide

Qty
1
1
1
2
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
With resistor

For waterproof

With 10 amps fuse

SINGLE KIT 2 (TACH, SPEED/ FUEL MGT) w/o Transom Wire Harness
Kit P/N: 6Y8-W0035-10
Part No.
6Y8-82521-11
6Y8-81920-01
6Y8-82582-11
6Y8-8350T-11
6Y8-83500-11
6Y8-8356N-01
6Y8-83553-01
6Y8-2819K-R1
6Y8-2819V-X0

Part name
Pigtail bus wire, 2 ft
Multi-hub
4-pin cap, WHT
RND tachometer
RND comb. Speed & fuel mgt gauge
Fuel tank & GPS wire
PWR supply wire, 8 ft
Quick installation guide
Quick operation guide

9-22

Qty
2
1
1
1
1
1
1
1
1

Remarks
With resistor cap, GRY
For waterproof

With 10 amps fuse

DIGITAL NETWORK GAUGE RIGGING KIT CONTENTS

TRANSOM RIGGING KIT FOR EUROPE
SINGLE KIT 1 (SINGLE-HUB)
Kit P/N: 6Y8-W0035-40
Part No.
6Y8-82521-31
6Y8-81920-11

Part name
Pigtail bus wire, 6 ft
Single-hub

Qty
1
1

Remarks
With resistor

SINGLE KIT 2 (MULTI-HUB)

Kit P/N: 6Y8-W0035-50
Part No.
6Y8-82521-41
6Y8-81920-01
6Y8-82582-11
6Y8-82582-01

Part name
Pigtail bus wire, 9 ft
Multi-hub
4-pin cap, WHT
2-pin cap, RED

Qty
1
1
2
1

Remarks
With resistor cap, GRY
For waterproof
For waterproof

TWIN KIT 1 (MULTI-HUB)

Kit P/N: 6Y8-W0035-60
Part No.
6Y8-82521-41
6Y8-82521-31
6Y8-81920-01
6Y8-82582-01
6Y8-82582-11

Part name
Pigtail bus wire, 9 ft
Pigtail bus wire, 6 ft
Multi-hub
2-pin cap, RED
4-pin cap, WHT

Qty
1
1
1
1
1

Remarks

With resistor cap, GRY

For waterproof
For waterproof

TWIN KIT 2 (MULTI-HUB)

Kit P/N: 6Y8-W0035-70
Part No.
6Y8-82521-51
6Y8-82521-41
6Y8-81920-01
6Y8-82582-01
6Y8-82582-11

Part name
Pigtail bus wire, 12 ft
Pigtail bus wire, 9 ft
Multi-hub
2-pin cap, RED
4-pin cap, WHT

Qty
1
1
1
1
1

9-23

Remarks

With resistor cap, GRY

For waterproof
For waterproof

Part name
Speed sensor kit
Multi-hub
Single-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 12 ft
Main bus wire, 25 ft
SQR fuel mgt gauge
SQR speedometer
SQR tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire

Qty
1
1
1
3
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
With resistor

Qty
1
1
2
1
1
1
2
3
1
1
1
4
4
4
4

Remarks

With 10 amps fuse

TWIN KIT (TACH)

Kit P/N: 6YR-W0035-S1
Required the single-kit.
Part No.
61B-8258A-01
6K1-8258A-40
6Y8-81920-01
6Y8-82521-11
6Y8-82521-51
6Y8-82553-01
6Y8-82582-01
6Y8-82582-11
6Y8-8350T-01
704-48207-P1
6Y8-82570-02
90149-05M05
92990-05100
92990-05600
95380-05600

Part name
Main wire-harness 10-pin, 32 ft
Main wire-harness 10-pin, 26 ft
Multi-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 12 ft
Main bus wire, 1 ft
2-pin cap, RED
4-pin cap, WHT
SQR tachometer
Twin-binnacle RCL box, Premium
Twin-switch panel
Screw, 25 mm
SRG washer
PLN washer
Nut

9-24

With resistor cap, GRY

For waterproof
For waterproof

Part name
Multi-hub
Single-hub
Pigtail bus wire, 3 ft
Pigtail bus wire, 9 ft
Main bus wire, 20 ft
4-pin cap, WHT
SQR tachometer
PWR supply wire, 8 ft
Operation manual
Quick installation guide

Qty
1
1
1
1
1
2
1
1
1
1

Remarks
With resistor cap, GRY
With resistor

For waterproof
With 10 amps fuse

SINGLE KIT 2 (TACH, SPEED/FUEL MGT)

Kit P/N: 6YR-W0035-V3
Part No.
60V-8A4L1-11
6Y8-81920-01
6Y8-81920-11
6Y8-82521-21
6Y8-82521-51
6Y8-82553-31
6Y8-82582-11
6Y8-83500-01
6Y8-8350T-01
6Y8-83553-01
6Y8-8356N-01
6Y8-2819U-01
6Y8-2819K-S1

Part name
Speed sensor kit
Multi-hub
Single-hub
Pigtail bus wire, 3 ft
Pigtail bus wire, 12 ft
Main bus wire, 25 ft
4-pin cap, WHT
SQR comb. speedometer & fuel mgt gauge
SQR tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire
Operation manual
Quick installation guide

Qty
1
1
1
2
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
With resistor

For waterproof

With 10 amps fuse

F350/F300 SINGLE KIT (TACH, SPEED/ FUEL MGT)

Kit P/N: 6X6-W0035-20
Part No.
6Y8-8350T-01
6Y8-8356N-01
6Y8-83500-01
6Y8-81920-01
6Y8-85371-01
6Y8-82521-21
6Y8-82521-31
6Y8-83553-01
6R5-82570-05
6X6-8258A-30
6Y8-2819U-01

Part name
SQR Tachometer
GPS/ Fuel tank wire
SQR Comb. Speed/ fuel mgt meter
Multi-hub
Resistor cap
Pigtail bus wire, 3 ft
Pigtail bus wire, 6 ft
PWR supply wire, 8 ft
Switch panel
Main wire-harness, 10 m
Operation manual

Qty
1
1
1
1
1
2
1
1
1
1
1

9-25

Remarks

Gray, 6-pin

With 10 amps fuse

Single
16-pin
Japanese

Part name
Multi-hub
Single-hub
Pigtail bus wire, 3 ft
Pigtail bus wire, 9 ft
Main bus wire, 20 ft
4-pin cap, WHT
RND tachometer
PWR supply wire, 8 ft
Operation manual
Quick installation guide

Qty
1
1
1
1
1
2
1
1
1
1

Remarks
With resistor cap, GRY
With resistor

For waterproof
With 10 amps fuse

SINGLE KIT 2 (TACH, SPEED/FUEL MGT)

Kit P/N: 6YR-W0035-X3
Part No.
60V-8A4L1-11
6Y8-81920-01
6Y8-81920-11
6Y8-82521-21
6Y8-82521-51
6Y8-82553-31
6Y8-82582-11
6Y8-83500-11
6Y8-8350T-11
6Y8-83553-01
6Y8-8356N-01
6Y8-2819V-01
6Y8-2819K-R1

Part name
Speed sensor kit
Multi-hub
Single-hub
Pigtail bus wire, 3 ft
Pigtail bus wire, 12 ft
Main bus wire, 25 ft
4-pin cap, WHT
RND comb. speedometer & fuel mgt gauge
RND tachometer
PWR supply wire, 8 ft
Fuel tank & GPS wire
Operation manual
Quick installation guide

9-26

Qty
1
1
1
2
1
1
1
1
1
1
1
1
1

Remarks
Refer to kit contents
With resistor cap, GRY
With resistor

For waterproof

With 10 amps fuse

IMMOBILIZER RIGGING KIT CONTENTS

IMMOBILIZER KIT 1 (FOR US, ANZ, CRB)
Kit P/N: 6Y8-W0035-81
Part No.
6Y8-86254-21
90167-06M00
97880-06035
90201-06M30
95780-06300
6Y8-82521-11
6Y8-48277-00
6Y8-28107-92

Part name
Immobilizer unit
Screw
Screw
Washer
Nut
Pigtail bus wire
Symbol graphic
Instruction

Qty
1
4
4
8
4
1
4
1

Remarks
Conformed to local frequency band

Qty
1
4
4
8
4
1
3
1

Remarks
Conformed to local frequency band

0.3 m, 1 ft

IMMOBILIZER KIT 2 (FOR JPN)

Kit P/N: 6Y8-W0035-90
Part No.
6Y8-86254-30
90167-06M00
97880-06035
90201-06M30
95780-06300
6Y8-82521-11
6Y8-48277-00
6Y8-28107-92

Part name
Immobilizer unit
Screw
Screw
Washer
Nut
Pigtail bus wire
Symbol graphic
Instruction

0.3 m, 1 ft

SINGLE ENGINE GAUGE KIT FOR IMMOBILIZER (FOR EU, ANZ, JPN, GEN)
P/N: 6Y8-W0035-A0 (w/ IG SW panel)
Part No.
6Y8-8350T-01
6Y8-83500-01
6Y8-81920-01
6Y8-82553-01
6Y8-82582-11
6Y8-82582-01
6Y8-82521-11
6Y8-82521-31
6Y8-8356N-01
6Y8-83553-01
6X6-82570-30
6X6-8258A-30
6Y9-2819K-E0

Part name
SQR tachometer
SQR speed/fuel gauge
Multi-hub
Main bus wire, 1 ft
4-pin waterproof cap
2-pin waterproof cap
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Fuel tank/ GPS wire
PWR supply wire
IG switch panel, single
Main wire-harness, 33 ft
Set up manual

Qty
1
1
2
1
3
1
2
1
1
1
1
1
1

9-27

Remarks

w/ resistor
White
Red

NMEA0183
w/ 10 amps fuse
OFF-ON-START
16-pin

IMMOBILIZER RIGGING KIT CONTENTS

SINGLE ENGINE GAUGE KIT FOR IMMOBILIZER (FOR EU, ANZ, JPN, GEN)
P/N: 6Y8-W0035-D0 (w/o IG SW panel)
Part No.
6X6-8258A-30
6Y8-81920-01
6Y8-82521-11
6Y8-82521-31
6Y8-82553-01
6Y8-82582-01
6Y8-82582-11
6Y8-83500-01
6Y8-8350T-01
6Y8-83553-01
6Y8-8356N-01
6Y9-2819K-E0

Part name
Main wire-harness, 33 ft
Multi-hub
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Main bus wire, 1 ft
2-pin waterproof cap
4-pin waterproof cap
SQR speed/fuel gauge
SQR tachometer
PWR supply wire
Fuel tank/GPS wire
Set-up manual

Qty
1
2
2
1
1
1
3
1
1
1
1
1

Remarks
16-pin

Red
White
NMEA0183
w/ 10 amps fuse

TWIN ENGINE GAUGE KIT FOR IMMOBILIZER

P/N: 6Y8-W0035-B0
Part No.
6Y8-8350T-01
6Y8-8350F-01
6Y8-8350S-01
6Y8-81920-01
6Y8-82553-01
6Y8-82582-11
6Y8-82582-01
6Y8-82521-11
6Y8-82521-31
6Y8-8356N-01
6Y8-83553-01
6X6-82570-40
6X6-82570-60
6X6-8258A-40
6Y9-2819K-E0

Part name
SQR tachometer
SQR fuel MGT gauge
SQR speedometer
Multi-hub
Main bus wire, 1 ft
4-pin waterproof cap
2-pin waterproof cap
Pigtail bus wire, 2 ft
Pigtail bus wire, 6 ft
Fuel tank/ GPS wire
PWR supply wire
IG switch panel, twin
Start/stop SW panel, twin
Main wire-harness, 40 ft
Set up manual

Qty
2
1
1
3
2
3
2
4
2
1
1
1
1
2
1

9-28

Remarks

w/ resistor
White
Red

NMEA0183
w/ 10 amps fuse
OFF-ON
16-pin

Part name
Premium gauge assy
Multi-hub
4-pin waterproof cap
Main bus wire, 1 ft
Pigtail bus wire, 6 ft
Conversion harness 4, 0.5 ft
Conversion harness, 1 ft
PWR supply wire
GPS wire
Fuel tank wire
IG switch panel, single
Main wire-harness, 33 ft
Set up manual

Qty
1
1
2
1
1
1
1
1
1
1
1
1
1

Remarks
5" color display, w/ screen cover
w/ resistor cap
White

Hub to premium gauge

RC to hub
w/ 10 amps fuse
NMEA0183
4 fuel tanks
OFF-ON-START
16-pin

P/N: 6Y9-W0035-21 (w/o IG SW panel)

Part No.
6X6-8258A-30
6Y8-81920-01
6Y8-82521-31
6Y8-82553-01
6Y8-82582-11
6Y8-83553-01
6Y9-2819K-E0
6Y9-83553-00
6Y9-83553-40
6Y9-8356N-01
6Y9-8356N-10
6Y9-83710-01

Part name
Main wire-harness, 33 ft
Multi-hub
Pigtail bus wire, 6 ft
Main bus wire, 1 ft
4-pin waterproof cap
PWR supply wire
Set up manual
Conversion harness, 1 ft
Conversion harness 4, 0.5 ft
GPS wire
Fuel tank wire
Premium gauge assy

Qty
1
1
1
1
2
1
1
1
1
1
1
1

9-29

Remarks
16-pin
w/ resistor cap

White
w/ 10 amps fuse
RC to Hub
Hub to premium gauge
NMEA0183
4 fuel tanks
5" color display, w/ screen cover

Part name
Premium gauge assy
Multi-hub
4-pin waterproof cap
Main bus wire, 1 ft
Pigtail bus wire, 6 ft
Conversion harness, 0.5 ft
Conversion harness, 1 ft
PWR supply wire
GPS wire
Fuel tank wire
IG switch panel, twin
Start/stop SW panel, twin
Main wire-harness, 40 ft
Set up manual

Qty
1
1
2
1
1
1
1
1
1
1
1
1
2
1

Remarks
5" color display, w/ screen cover
w/ resistor cap
White

Hub to premium gauge

RC to hub
w/ 10 amps fuse
NMEA0183
4 fuel tanks
OFF-ON
16-pin

MAIN HELM SW PANEL TWIN ENGINE KIT (FOR US, CAN)

P/N: 6X6-W0035-50
Part No.
6X6-82570-40
6X6-82570-60

Part name
IG switch panel, twin
Start/stop SW panel, twin

Qty
1
1

Remarks
OFF-ON

MAIN HELM SW PANEL TRIPLE ENGINE KIT (FOR US, CAN)

P/N: 6X6-W0035-60
Part No.
6X6-82570-50
6X6-82570-70

Part name
IG switch panel, triple
Start/stop SW panel, triple

Qty
1
1

Remarks
OFF-ON

2ND HELM SW PANEL SINGLE ENGINE KIT (FOR US, CAN)

P/N: 6X6-W0035-70
Part No.
6X6-82570-80
6X6-82570-B0
6X6-82570-90

Part name
Start/stop SW panel, single
Station selector SW panel
Emergency stop SW panel

Qty
1
2
1

9-30

Remarks

DIGITAL NETWORK PREMIUM GAUGE RIGGING KIT CONTENTS

2ND HELM SW PANEL TWIN ENGINE KIT (FOR US, CAN)
P/N: 6X6-W0035-80
Part No.
6X6-82570-E0
6X6-82570-B0
6X6-82570-90

Part name
Start/stop SW panel, twin
Station selector SW panel
Emergency stop SW panel

Qty
1
2
1

Remarks

2ND HELM SW PANEL TRIPLE ENGINE KIT (FOR US, CAN)

P/N: 6X6-W0035-90
Part No.
6X6-82570-F0
6X6-82570-B0
6X6-82570-90

Part name
Start/stop SW panel, triple
Station selector SW panel
Emergency stop SW panel

Qty
1
2
1

9-31

Remarks

* For installation, see the service manual and/or installation manual.

LIGHTING COIL KIT (FOR EU, CA, JPN)

P/N: 6BX-W8130-A0
Applicable model:
Global model
US model
Canada model

F4B

F5A

F4A

F6C
F6A

Kit contents:
Part No.
6BX-81949-00
6BX-81960-00
6BX-82388-00
6BX-82581-00
6BX-85510-A0
6BX-85550-A0
90109-06M80
90464-30009
90465-08371
97595-06516
97595-06520

Part name
Wire lead
Rectifier/ regulator
Plate
Stay
Stator assy
Rotor assy
Bolt
Clamp
Clamp
Bolt
Bolt

Qty
1
1
1
1
1
1
1
1
1
2
3

Remarks

* For installation, see the service manual and/or service guide.

9-32

F250C
VF250LA
VF250LA

F225G

F250F

F275A

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

2-STROKE ENGINES
Global
2CMH
3AMH
4ACMH
5CMH
5CSMH
6CMH
E8DMH
EK8DMH
8CMH
9.9FMH
E9.9DMH
EK9.9DMH
EK9.9JMH
15FMHS
15FMH
E15DMH
EK15DMH
EK15PMH
20DMH
20DMHO
25BMH
25BW
25BWC
25BWH
E25BMH
EK25BMH
25BMHS
25XMH
25NMH
25NMHO
25NWC
EK25CMH
30HMH
30HW
30HWC
30HWH
E30HMH
30DEO
30DETO
30DMH
30DMHO
E40XMH
E40XW
E40XWH
E40XWT
40XMHS
40XWS
EK40GMH
E40GMH
E40GWH

Model name
US

Canada

6MH

8MH
9.9MH

15MH

20MH

Model
code

Prefix
code

Starting
serial number

6F8
6L5
6E0
6E3
6E4
6M8
677
680
6N0
63V
6B3
6B7
6B9
65D
63W
6B4
6B8
6C0

6F8K
6L5K
6E0K

1052939
1026451
1018541

6E3K

1066341

6M8
677K
680K
6N0
682K
6B3K
6B7K
6B9K
65D
684K
6B4K
6B8K
6C0K

1014151
1014609
1008723
1036778
1051516
1010915
1007749
1002973
1070201
1097765
1141562
1004347
1004740

6L3

6L3K

1010726

61RK

1048683

69R

Remarks

France made

For IND
For LKA
Brazil made, For BRA

For LKA
For EU

For JPN
69P
69T
69U
69X

62CK
69U
69XK

1003808
1012026
1000898

6L2

6L2K

1050326

6S6

6S6K

1000698

For EU
For ANZ
For LKA

61TK

1059754

For RUS

Brazil made, For BRA

For ANZ

25MH

69S

60B
For EU
6CT

6J8K

1011681
For EU

66T

66TK

1117441

67T

1106076

6F5

6F5K

1018484

6F6

6F6K

1075172

9-33

Brazil made, For BRA

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

2-STROKE ENGINES
Global
40VEO
40VETO
40VMHD
40VMHO
40VWHTO
EK40JMH
E40JMH
E40JW
E40JWH
E48CMH
50HET
50HETO
50HMHD
50HMHO
50HWHTO
55DEHD
55BED
55BET
E55CMH
E60JMHD
60FED
60FEDO
60FET
60FETO
E60HMHD
E60HWD
E60HWHD
E65AMHD
70BETO
75AED
75AEHD
75AET
75CETO
E75BMHD
85AED
85AEHD
85AET
90AETO
115BET
115CETO
E115AE
E115AET
E115AMH
E115AWH
130BETO
140BET
150AET
150FETO
Z150PETO
Z150QETO
L150AET

Model name
US

Canada

Model
code

Prefix
code

Starting
serial number

6H4K

1019856

63D
6H9

6H9K

1004725

6J4

6J4K

1032833

696

670K

1012381

Remarks

63C
63D
63B

For ANZ

62X
62W
63G
62X
63S
697

For ANZ
For EU
For ANZ

6H5K

1031324

For ANZ
For ANZ

63S

1001971

663K

1009041

6A3
64S

64S

1000517

6CU

6H2K

1012899

69D

6K5K

1030897

65S
6H3

65S
6H3K

1000747
1015090

692

1056618

For ZAF

692
67P
692

For EU

688

1030588

6H1
6E5
6N6

6H1

1046544

6E5

1029763

6L1
6F3

1005229
1002187

6G4

1022806

6J9
6K0

1014920
1001311

61U

VZ150TR

6N7
6F3
6G4
64C
68H
68J
6K0

9-34

Except JPN

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

2-STROKE ENGINES
Global
Z175HETO
Z175HETO
Z175GETO
Z200PETO
200GETO
200AET
200FETO
Z200NETO
L200AET
L200FETO
LZ200NETO
225DET
250GETO
L250GETO

Model name
US
VZ175TR

Z200TR

LZ200TR

Canada

Model
code

Prefix
code

Starting
serial number

68M
68M
68L
60F
64M
60H
64E
68F
60J
64H
68G
64F
6S3
6S4

62H
68M
6G5
60F
61H

1002180
1000055
1001225
1002203
1000552

6G6

1046837

6K1

1009071

6K7
6S3
6S4

1000877
1002710
1001832

9-35

Remarks
For US
For JPN
For ANZ
For ZAF

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

4-STROKE ENGINES
Global
F2AMH
F2.5AMH
F4BMH
F5AMH
F6CMH
F8CMH
F8CWH
FT8DE
FT8DEHP
FT8DEP
FT8DMH
F9.9FE
F9.9FEH
F9.9FMH
F9.9FWH
F9.9GEHP
FT9.9GE
FT9.9GEP
FT9.9GMH
FT9.9GWH
F9.9HMH
F15CE
F15CEH
F15CEHP
F15CEP
F15CMH
F15CWH
F20BE
F20BEH
F20BEHP
F20BEP
F20BMH
F20BWH
F20CE
F20CMH
F20BMHS
F20DETL
FT25FET
F25DE
F25DEH
F25DEHD
F25DEHT
F25DET
F25DMH
F25DMHD
F25DWH
F25DWHD
F30BEHD
F30BEHT
F30BET

Model name
US

Model
code

Prefix
code

Starting
serial number

6S7
69M
6BV
6BW
6BX

1004551
1074189
1015288
1008246
1013809

60R

1031873

T8EA
T8PHA
T8PA
T8MHA

60S

1026537

F9.9EHA
F9.9MHA

6AU

6AUK

1021854

Canada

F2.5MH
F4MHA

F6MHA
F8MHA

Remarks
France made, For JPN
France made
France made
France made
France made
France made
France made, For JPN
France made
France made, For CAN
France made
France made

F9.9EA
F9.9MHA
T9.9PHA
T9.9PA
T9.9EHA

T9.9PHA
T9.9EA
T9.9PA
T9.9MHA
T9.9EHA

F15EHA
F15PHA

F15EHA

F15MHA

For CAN
For JPN
For US & CAN

6AV

6AVK

1012188

For US & CAN

6CA

6CAK

1003092

For NOR
For EU

6AG

6AGK

1024647

For EU
For JPN

F20EA
F20EHA
F20PHA
F20PA
F20MHA

F20EHA
F20PHA
F20PA
F20MHA

6AH

6AHK

1033061

For JPN

T25A
F25EA
F25EHA

T25A

6AJ

6AJK

1001424

6BY
6DN
6BL

6BY
6DN
6BLK

1001326
1000161
1001174

6BP

6BPK

1011378

Brazil made, For BRA

For FIN

F25EHB
F25A
F25MHA

F25A
F25SMHA
F25MHB

New
For JPN
For JPN, New

F30EHA
6BT
F30A

9-36

6BT

1003899

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

4-STROKE ENGINES
Global
F40DET
F40FED
F40FEHD
F40FEHT
F40FET
F40GETL
F50DET
FT50CED
FT50CEHD
FT50CET
F50FED
F50FEHD
F50FEHT
F50FET
FT50GET
F60CEHT
F60CET
FT60DEHD
FT60DEHT
FT60DET
F60CETL
F70AET
F75BET
F75CED
F75CEHD
F80CED
F80BET
F90BET
F95AET
F100BEHD
F100BET
F100DET
F115AEHT
F115AET
FL115AET
F150AET
FL150AET
F150BET
FL150BET
F200CET
FL200CET
F200DET
F200BET
FL200BET
F225BET
FL225BET

Model name
US

Canada

F40EA
F40EHA

F40A

Model
code

Prefix
code

Starting
serial number

6AK

1009618

6BG

1019903

6CY
60A

1001012
1001692

61S

64J

1011328

Remarks
For EU

For ITA

For EU

F50TR
T50TR
F60TR

6C1

1042224

6C2

1012253

6C5

1049208

6C6

1018352

6DP
6CJ
6D6

6DP
6CJ
62P

1000101
1011120
1013956

6BC

1002079

6CK
6D7
6D8
6S0

6CK
6D7
61P
6S0

1000026
1013666
1050228
1000713

60C

1006414

6D9
68V

1018900

F115A

68V

1124466

LF115A

68W

1005001

F150A

63P

1106291

LF150A

64P

1013389

6BM
6BN
6AL
6AM
6CD
6S1
6S2
6AS
6AT

1001267
1000213
1001697
1000232
1000832
1002876
1001074
1001490
1000190

F50HA
F50A
T50A
F60HA
F60A

T60TR

T60A

F70A
F75TR

F70A
F75A

F90TR

F115A
F115AET1
LF115A
FL115AET1
F150TR
F150AET1
LF150TR
FL150AET1

F200A
LF200A
VF200LA
F225A
LF225A

F90A

F200A
LF200A
VF200LA

9-37

For MEX, New

For MEX, New
Brazil made, For BRA

For EU

For JPN

For US & CAN

2012 YEARS MODELS MANUFACTURE START SERIAL NUMBER

4-STROKE ENGINES
Global
F225CET
F225DET
F225FET
FL225FET
F225GET
F250CET

Model name
US

Canada

Model
code

Prefix
code

Starting
serial number

6BB
6CC
6CL
6CM
6DM
6CB

1001502
1001056
1001084
1000190
1000031
1002436

VF225LA
F225CA
LF225CA

VF250LA
F250CA
F250DET1
LF250CA
FL250DET1

VF250LA

6BB
6CC
6CL
6CM
6DM
6CB

F250CA

6CG

1002208

LF250CA

6CH

1000678

6DL
6DX
6DY
6P2
6P3
6DK

1000046
1000001
1000001
1035795
1014509
1000065

F300AET

6BJ

FL300AET

6BK

F300CA

6CE

1003590

LF300CA

6CF

1001446

F350CA

6AW

LF350CA

6AX

F250DET
FL250DET
F250FET
F250GET
FL250GET
F250AET
FL250AET
F275AET

F300BET
FL300BET
F350AET
FL350AET

F250TR
LF250TR

F300CA
F300BET1
LF300CA
FL300BET1
F350CA
F350AET1
LF350CA
FL350AET1

9-38

Remarks

For US & CAN

For JPN
For US & CAN

For JPN
New
New

For JPN
Continued from 2011 serial
number
Continued from 2011 serial
number

Continued from 2011 serial

number
Continued from 2011 serial
number

Produced in Japan
June 2011 0.02 1NP
(E)

Rigging Guide 2019
100% (1)
Rigging Guide 2019
352 pages
bf40d-bf50d (2008) (66zz500) t2
No ratings yet
bf40d-bf50d (2008) (66zz500) t2
737 pages
Carburadores Manual
86% (7)
Carburadores Manual
205 pages
Yamaha - Us Rig - Guide 2001
67% (9)
Yamaha - Us Rig - Guide 2001
497 pages
2cmh PDF
No ratings yet
2cmh PDF
226 pages
Marine Bf60a Owners Manual
No ratings yet
Marine Bf60a Owners Manual
151 pages
Yamaha Rigging Guide 2002
70% (10)
Yamaha Rigging Guide 2002
89 pages
Yam Remont 50 90 PDF
100% (1)
Yam Remont 50 90 PDF
194 pages
Starting Model Year 2000-200-225 OptiMax-Direct Fuel Injection-Starting Serial Number OG960500
No ratings yet
Starting Model Year 2000-200-225 OptiMax-Direct Fuel Injection-Starting Serial Number OG960500
745 pages
40HP Yamaha
No ratings yet
40HP Yamaha
98 pages
Yamaha 2.5hp - Service Manual
No ratings yet
Yamaha 2.5hp - Service Manual
144 pages
YAMAHA - Marine Rigging Guide
No ratings yet
YAMAHA - Marine Rigging Guide
252 pages
F40 Outboard
No ratings yet
F40 Outboard
110 pages
YAMAHA Rigging Guide 2018
100% (4)
YAMAHA Rigging Guide 2018
320 pages
Honda BF20D BAMJ PDF
50% (2)
Honda BF20D BAMJ PDF
147 pages
Rigging2002 PDF
0% (1)
Rigging2002 PDF
89 pages
Yamaha Malta Manual
No ratings yet
Yamaha Malta Manual
57 pages
MERCURY - 2 - Stroke - Tehnicheskoe - Diagramas Eletricos - Combustivel e Outros
No ratings yet
MERCURY - 2 - Stroke - Tehnicheskoe - Diagramas Eletricos - Combustivel e Outros
230 pages
Honda Bf80a Bf100a OB Motors Parts Catalogue
100% (1)
Honda Bf80a Bf100a OB Motors Parts Catalogue
160 pages
90AETOL
No ratings yet
90AETOL
204 pages
Owner's Manual Lit 18626 12 49
No ratings yet
Owner's Manual Lit 18626 12 49
116 pages
90AETO'08
100% (1)
90AETO'08
58 pages
Yamaha F130aet - 2016 - Parts Catalogue
100% (1)
Yamaha F130aet - 2016 - Parts Catalogue
74 pages
Yamaha Engine Autralia PDF
100% (4)
Yamaha Engine Autralia PDF
560 pages
Yamaha f9.9f Service Manual
No ratings yet
Yamaha f9.9f Service Manual
84 pages
Vx1050a R
No ratings yet
Vx1050a R
59 pages
Manual de Motor Fuera de Borda Mercury XP 115 Pro
No ratings yet
Manual de Motor Fuera de Borda Mercury XP 115 Pro
150 pages
Yamaha T8 Owner's Manual (En)
No ratings yet
Yamaha T8 Owner's Manual (En)
90 pages
Command Link Multifunction Meter (Round) : Operation Manual
100% (2)
Command Link Multifunction Meter (Round) : Operation Manual
36 pages
Manual Honda Bf25
No ratings yet
Manual Honda Bf25
138 pages
Yamaha f2,5b
No ratings yet
Yamaha f2,5b
96 pages
200-225 Optimax-Direct Fuel Injection-With Serial Numbers United States - 0g386496 and Above
No ratings yet
200-225 Optimax-Direct Fuel Injection-With Serial Numbers United States - 0g386496 and Above
527 pages
Nissan GTR R32 Service Manual
67% (6)
Nissan GTR R32 Service Manual
804 pages
MERCURY 135 150 175 OptiMax Instruktsiya Po Ustanovke Lodochnyh Motorov PDF
No ratings yet
MERCURY 135 150 175 OptiMax Instruktsiya Po Ustanovke Lodochnyh Motorov PDF
36 pages
20BM 653 Yamaha Outboard Repair Manual
No ratings yet
20BM 653 Yamaha Outboard Repair Manual
86 pages
Yamaha Owners Manual Z200
No ratings yet
Yamaha Owners Manual Z200
110 pages
Yamaha F40 Owners Manual
100% (2)
Yamaha F40 Owners Manual
92 pages
Yamaha F100 Yamaha F70 - Yamaha Motor Europe
No ratings yet
Yamaha F100 Yamaha F70 - Yamaha Motor Europe
52 pages
Yamaha Gauges and Gauge Kits
100% (1)
Yamaha Gauges and Gauge Kits
20 pages
Mercury 115 Manual 1d
No ratings yet
Mercury 115 Manual 1d
15 pages
MFS 75 115 Tohatsu Manual
100% (1)
MFS 75 115 Tohatsu Manual
89 pages
Velvet Drive Installation Manual
No ratings yet
Velvet Drive Installation Manual
29 pages
Honda bf2 Bael 1100001 1199999 Owners Manual 107929
No ratings yet
Honda bf2 Bael 1100001 1199999 Owners Manual 107929
45 pages
Section 7 - Transmissions
100% (1)
Section 7 - Transmissions
692 pages
Honda Outboard Service Workshop and Repair BF15D BF20D.pages.1 20
100% (1)
Honda Outboard Service Workshop and Repair BF15D BF20D.pages.1 20
20 pages
Command Link Multifunction Meter: Set Up Manual
No ratings yet
Command Link Multifunction Meter: Set Up Manual
116 pages
Honda Marine Range Catalogue 2012
No ratings yet
Honda Marine Range Catalogue 2012
40 pages
150A, 150F, L150F, D150H, 175D, 200F, L200F, 200G, 225D: Service Manual
0% (1)
150A, 150F, L150F, D150H, 175D, 200F, L200F, 200G, 225D: Service Manual
46 pages
Service Manual 6y8 Lan Gauges
No ratings yet
Service Manual 6y8 Lan Gauges
34 pages
3MH (6L5)
No ratings yet
3MH (6L5)
93 pages
Assembly of The Robotic Arm
No ratings yet
Assembly of The Robotic Arm
141 pages
Yamaha F15B Service Manual (En)
No ratings yet
Yamaha F15B Service Manual (En)
180 pages
Accesorios Yamaha
0% (1)
Accesorios Yamaha
33 pages
Mercury 2.5-3.5 4 Stroke Later
No ratings yet
Mercury 2.5-3.5 4 Stroke Later
205 pages
Centry Familiarisation
100% (2)
Centry Familiarisation
58 pages
Mariner W 15 - 20 - 25 HP
33% (3)
Mariner W 15 - 20 - 25 HP
25 pages
DF4-5 Service Manual
100% (1)
DF4-5 Service Manual
148 pages
DF150 175 Setup
No ratings yet
DF150 175 Setup
16 pages
Yamaha F350 Outboard Rigging Guide....
100% (2)
Yamaha F350 Outboard Rigging Guide....
8 pages
Suzuki DF9.9b-15a-20a PDF
100% (1)
Suzuki DF9.9b-15a-20a PDF
30 pages
2018 Vaderstadt Price List
No ratings yet
2018 Vaderstadt Price List
160 pages
Parts Manual KX250F11
No ratings yet
Parts Manual KX250F11
78 pages
Spicer Service Manual
100% (2)
Spicer Service Manual
98 pages
Honda BF50 (5HP) BF5A Outboard Motors Shop Manual.
0% (2)
Honda BF50 (5HP) BF5A Outboard Motors Shop Manual.
4 pages
Power Trim
No ratings yet
Power Trim
9 pages
Machine Tool Drive and Mechanism Part II
No ratings yet
Machine Tool Drive and Mechanism Part II
42 pages
Catalog RODCRAFT WORKSHOP 2015 - WWW - Sculegero
100% (1)
Catalog RODCRAFT WORKSHOP 2015 - WWW - Sculegero
51 pages
Statistics 2 Revision Notes
0% (1)
Statistics 2 Revision Notes
40 pages
Accessories Assemble
No ratings yet
Accessories Assemble
34 pages
6D6 28199 26
No ratings yet
6D6 28199 26
0 pages
Service Manual: Models 225 - 225 Efi - 250 Efi - 3.0 Litre Marathon - 3.0 Litre Seapro
0% (1)
Service Manual: Models 225 - 225 Efi - 250 Efi - 3.0 Litre Marathon - 3.0 Litre Seapro
13 pages
Massey Ferguson MF 3610 TRACTOR Service Parts Catalogue Manual (Part Number 1637182)
No ratings yet
Massey Ferguson MF 3610 TRACTOR Service Parts Catalogue Manual (Part Number 1637182)
16 pages
Final Presentation - Corcoran SABIC.13705506
No ratings yet
Final Presentation - Corcoran SABIC.13705506
30 pages
Asrar Alam 13K31A0313
No ratings yet
Asrar Alam 13K31A0313
24 pages
Durham Maths Mysteries ( (PDF)
No ratings yet
Durham Maths Mysteries ( (PDF)
16 pages
BV Rules PtE Ch3 Sec1 AUT-UMS
No ratings yet
BV Rules PtE Ch3 Sec1 AUT-UMS
21 pages
Baker A-5 Semidisassenbly
No ratings yet
Baker A-5 Semidisassenbly
7 pages
GW491QE Petrol Engine Service Manual Engine+service+&maintenance+data
No ratings yet
GW491QE Petrol Engine Service Manual Engine+service+&maintenance+data
15 pages
Transfer ASCO Serie 7000
No ratings yet
Transfer ASCO Serie 7000
12 pages
Cara Membuat Es Krim Dan Resep
No ratings yet
Cara Membuat Es Krim Dan Resep
170 pages
This Is A Test PDF Document.: If You Can Read This, You Have Adobe Acrobat Reader Installed On Your Computer
No ratings yet
This Is A Test PDF Document.: If You Can Read This, You Have Adobe Acrobat Reader Installed On Your Computer
1 page
LATEX
100% (1)
LATEX
171 pages
Anupramanan Form
100% (1)
Anupramanan Form
4 pages
Inj Pump Assy
No ratings yet
Inj Pump Assy
7 pages
Especificaciones Convertidores de Torque Allison PDF
100% (1)
Especificaciones Convertidores de Torque Allison PDF
6 pages
Engine Electrical System
No ratings yet
Engine Electrical System
14 pages
ATR Hydraulic System
No ratings yet
ATR Hydraulic System
8 pages
Gear Inspection and Measurement: ITW., Imnois Tools, Uncolnwood
No ratings yet
Gear Inspection and Measurement: ITW., Imnois Tools, Uncolnwood
6 pages
RULAND BeLLOWS coOuplLingsS
No ratings yet
RULAND BeLLOWS coOuplLingsS
6 pages
Air Conditioning Maintenance Schedule
No ratings yet
Air Conditioning Maintenance Schedule
1 page
Typical VALVES - K VALUE
No ratings yet
Typical VALVES - K VALUE
1 page
Cat Deo PDF
No ratings yet
Cat Deo PDF
2 pages
EPUT Assignment 1
No ratings yet
EPUT Assignment 1
3 pages
Energy Audit Questionnaire
No ratings yet
Energy Audit Questionnaire
2 pages
3 CH Outline Legal and Development
No ratings yet
3 CH Outline Legal and Development
3 pages
Independent Contractor Application
No ratings yet
Independent Contractor Application
3 pages
System Shock 2 (Classics) - Controls - Allgame
No ratings yet
System Shock 2 (Classics) - Controls - Allgame
2 pages
Murmur Guide
No ratings yet
Murmur Guide
2 pages
Notice N.I. Act
No ratings yet
Notice N.I. Act
2 pages
Implementation of Sinusoidal PWM: Experiment No.9
No ratings yet
Implementation of Sinusoidal PWM: Experiment No.9
2 pages
VG7 XVS - M PDF
No ratings yet
VG7 XVS - M PDF
1 page
Prince Hydraulics - SPD1 Series Hydraulic Double Gear Pumps Offered by PRC Industrial Supply
No ratings yet
Prince Hydraulics - SPD1 Series Hydraulic Double Gear Pumps Offered by PRC Industrial Supply
2 pages
PDF Sample 1
No ratings yet
PDF Sample 1
1 page
Absorp List
No ratings yet
Absorp List
1 page