Scribd
Upload
58 views1 page

Prime Tert Rough Slick

The Perimeter Trough provides both heating and cooling for a building's perimeter within a single housing. It houses a fin tube for heating and has openings for optional cooling. It is self-supported by pedestals for easy installation before the access floor. It introduces conditioned air along the perimeter through a linear bar grille. Custom configurations are available upon request.

Uploaded by

Lee Chorney
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views1 page

Prime Tert Rough Slick

The Perimeter Trough provides both heating and cooling for a building's perimeter within a single housing. It houses a fin tube for heating and has openings for optional cooling. It is self-supported by pedestals for easy installation before the access floor. It introduces conditioned air along the perimeter through a linear bar grille. Custom configurations are available upon request.

Uploaded by

Lee Chorney
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Perimeter Trough for Heating and Cooling

A Perimeter Trough provides a method to both heat and cool


a buildings perimeter within the same housing for maximum
efficiency and plenum utilization.
The standard trough is designed to house a 4-1/4 field supplied fin tube for heating which directs a steady flow of warm
air to the buildings skin. The air is directed through an aluminum linear bar grille along the building perimeter. For
optional cooling, the trough is available with flanged rectangular or circular openings for introduction of conditioned air.
Custom configurations are available upon request but please
be very specific in your requirements.
For ease of installation, the trough is self supported by standard flat head pedestals which are locked into position on
the bottom of the housing. This allows the trough to be
installed before the access floor is installed to facilitate
plumbing and other contracting.
With the increased focus on underfloor air and indoor air
quality, we are very excited about the opportunity to introduce new products such as this and further promote the use
of underfloor air and access flooring.
To receive more information on Tates Perimeter Trough, in
Canada please contact Tates Technical Hotline at 800-2317788 all other inquires should contact Pedro Bermudez at:
913-312-1100 ext. 310, [email protected] or
visit us online at: www.tateaccessfloors.com

3/4 x 3/8 Closed Cell Gasket


Seal with Tape or Foam
Caulk at Wall

Cut Access Floor Panel


10 Bar Grille
1/4 without Carpet Tile

3/4 x 3/8 Closed


Cell Gasket

Housing
Field Supplied Fin Tube

Baffle Stabilizer 10

Fin Tube Holder


Baffle
3.00

Tray Pedestal Support


Support Pedestal

Tates Perimeter Trough Features:


Both heating and cooling capabilities
Attractive Liner bar grill around perimeter
Self supporting pedestal
Quick easy installation
Accommodates hot water or electric fin tube heating
Allows for underfloor plenum VAV or cold water cooling

Perimeter Trough Style Unit

Perimeter Trough Style Unit

(cooling mode)

(heating mode)

Fin Tube Off

Fin Tube On
Air Plenum
Damper Open

The trough style unit is designed to deliver both cooling and


heating to the space. In cooling mode, the dampers open
to allow conditioned air to exit out of the linear bar grill.

Air Plenum
Damper Closed
The trough style unit is designed to deliver both cooling and
heating to the space. In heating mode, the dampers close and
the fin tube energizes and heats up. The cool air from the
perimeter glass travels down one side of the trough and warm
air moves out into the space through the other side of the trough.

7510 Montevideo Rd. Jessup, MD 20794 800-231-7788 [email protected] www.tateaccessfloor.com

You might also like