CSR MATERIAL SAFETY DATA SHEET
Alumina
SECTION 1: IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name:
Alumina
Other Names:
Alumina Powder, Aluminium Oxide, Calcined Alumina, Smelter Grade Alumina,
Metallurgical Grade Alumina
Product Codes/Trade Names:
Recommended Use:
Feedstock in production of aluminium, manufacture of abrasives, refractories and
ceramics
Applicable In:
Australia
Supplier:
Gove Aluminium Finance Limited (ABN 45 001 860 073)
Address:
Triniti 3, 39 Delhi Road, North Ryde NSW 2113, Australia
Telephone:
+61 2 9235 8144 (or 1800 807 668 (available in Australia only))
Email Address:
http://www.csr.com.au/Pages/Contact-Us.aspx
Web Site:
www.csr.com.au
Facsimile:
+61 2 9235 8166
Emergency Phone Number:
000 Fire Brigade and Police (available in Australia only)
Poisons Information Centre:
13 11 26 (available in Australia only)
This Material Safety Data Sheet (MSDS) is issued by the Supplier in accordance with National standards and guidelines from
Safe Work Australia (SWA formerly ASCC/NOHSC). The information in it must not be altered, deleted or added to. The
Supplier will not accept any responsibility for any changes made to its MSDS by any other person or organization. The
Supplier will issue a new MSDS when there is a change in product specifications and/or Standards, Codes, Guidelines, or
Regulations.
SECTION 2: HAZARD IDENTIFICATION
STATEMENT OF HAZARDOUS NATURE: Classified as Hazardous according to the Approved Criteria For Classifying
Hazardous Substances [NOHSC:1008] 3rd Edition.
Alumina is classified as Non-Dangerous Goods according to the Australian Code for the Transport of Dangerous Goods by
Road and Rail.
Risk Phrases
R20: Harmful by inhalation.
Safety Phrases
S22: Do not breathe dust.
R36/37/38: Irritating to eyes, respiratory system and skin.
SECTION 3: COMPOSITION / INFORMATION ON INGREDIENTS
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
MSDS for Alumina
Page 2 of 6
Chemical Name:
Synonyms:
Proportion:
CAS Number:
Aluminium oxide
98.4%
1344-28-1
Amorphous silica
<0.02%
7631-86-9
Trace amounts of other compounds may be present, including sodium oxide, ferric oxide and calcium oxide.
SECTION 4: FIRST AID MEASURES
Swallowed:
Rinse mouth and lips with water. Do not induce vomiting. If symptoms persist, seek medical
attention.
Eyes:
Flush thoroughly with flowing water, while holding eyelids open, for 15 minutes to remove all
traces. If symptoms such as irritation or redness persist, seek medical attention.
Skin:
Remove heavily contaminated clothing. Wash off skin thoroughly with water. Use a mild soap if
available. Shower if necessary. Seek medical attention for persistent redness, irritation or
burning of the skin.
Inhaled:
Remove to fresh air, away from dusty area. If symptoms persist, seek medical attention.
Advice to Doctor:
Treat symptomatically.
SECTION 5: FIRE FIGHTING MEASURES
Flammability:
This product is non flammable. In bulk, dry powder can build up a static electric
charge, when subject to the friction of conveying, mixing or other movement.
Suitable extinguishing media:
Use carbon dioxide, foam, dry chemical or water spray to extinguish, as required
for fire in surrounding materials.
Hazards from combustion products:
None
Special protective precautions and
equipment for fire fighters:
As required by fire in surrounding materials and fire conditions.
HAZCHEM Code:
None
SECTION 6: ACCIDENTAL RELEASE MEASURES
Containment Procedure:
Collect for re-use or disposal.
Clean Up Procedure:
Avoid generating dust and use Personal Protection, as described in Section 8.
SECTION 7: HANDLING AND STORAGE
Handling:
Use of safe work practices are recommended to avoid eye or skin contact and inhalation.
Manual handling should be in accordance with Manual Handling Regulations and Codes.
Storage:
Store in dry conditions, away from chlorine trifluoride, ethylene oxide, and highly alkaline
materials. Ensure containers are adequately labelled, protected from physical damage
and sealed when not in use.
Incompatibilities:
Incompatible with chlorine trifluoride (reacts violently, producing flame) and ethylene oxide
(polymerises violently).
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
MSDS for Alumina
Page 3 of 6
SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION
National Exposure Standards:
National Occupational Exposure Standard (NES), Safe Work Australia
(formerly ASCC/NOHSC)
3
Aluminium Oxide: TWA - 10 mg/m
Silica (amorphous): TWA - 2 mg/m3
Total dust (of any type, or particle size): TWA - 10 mg/m3
Notes on Exposure Standards:
All occupational exposures to atmospheric contaminants should be kept to as
low a level as is workable (practicable) and in all cases to below the National
Standard.
TWA (Time Weighted Average): the time-weighted average airborne
concentration over an eight-hour working day, for a five-day working week over
an entire working life. According to current knowledge this concentration should
neither impair the health of, nor cause undue discomfort to, nearly all workers.
Biological Limit Values:
No biological limit allocated.
ENGINEERING CONTROLS
Ventilation:
Open air work or use of natural ventilation (opening of doors and windows in
buildings) generally provides adequate ventilation. Local mechanical ventilation
or extraction may be required in areas where dust standards cannot be
achieved.
Special Consideration for
Repair &/or Maintenance of
Contaminated Equipment:
Recommendations on Exposure Control and Personal Protection should be
followed.
PERSONAL PROTECTION
Personal Hygiene:
Wash hands before eating, drinking, using the toilet, or smoking. Wash work
clothes regularly.
Skin Protection:
Excessive or repeated skin contact should be avoided by wearing long sleeved
shirts and long trousers, a cap or hat, and gloves (standard duty leather or
equivalent AS 2161).
Eye Protection:
Ventilated non-fogging goggles (dust resistant AS/NZS 1336) should be worn
when working in a dusty environment.
Respiratory Protection:
None required if engineering and handling controls are adequate. A suitable P1
or P2 particulate respirator chosen and used in accordance with AS/NZS 1715
and AS/NZS 1716 may be appropriate in dusty conditions.
Smoking & Other Dusts:
Inhalation of airborne particles from other sources, including those from cigarette
smoke, may increase the risk of lung disease. CSR recommends that all
storage and work areas should be non-smoking zones, and other airborne
contaminants be kept to a minimum.
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance:
White sandy crystalline powder
Odour:
None
pH, at stated concentration:
9.5-10.5
Vapour Pressure:
Not determined
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
MSDS for Alumina
Page 4 of 6
Vapour Density (air = 1):
Not determined
Boiling Point/Range (C):
2980C
Melting Point (C):
>2000C
Solubility in water:
Insoluble
Specific Gravity (H2O = 1):
3.53
FLAMMABLE MATERIALS
Flash Point:
Not applicable
Flammable (Explosive) Limits:
Not applicable
Autoignition Temperature:
Not applicable
ADDITIONAL PROPERTIES
% Volatiles:
0%
Volatile Organic Compounds
(VOC) Content:
(as specified by the Green
Building Council of Australia)
0%
SECTION 10: STABILITY AND REACTIVITY
Chemical Stability:
Stable. Dissolves slowly in alkaline solutions.
Incompatible Materials:
Incompatible with strong acids, strong bases, halocarbons, OF2, sodium nitrate,
vinyl acetate. Incompatible with chlorine trifluoride (reacts violently, producing
flame) and ethylene oxide (polymerises violently).
Conditions to avoid:
Dust generation
Hazardous Decomposition
Products:
None
Hazardous Reactions:
Hazardous polymerization occurs in presence of ethylene oxide.
SECTION 11: TOXICOLOGICAL INFORMATION
Toxicology data: Not available on this product, but anticipated to be very low with LD50 >5000 mg/kg.
Health effects information is based on reported effects in use from overseas and Australian reports.
Health Effects: Acute (short term)
Swallowed:
Ingestion of small amounts may cause mild irritation of mouth and throat. Swallowing larger
amounts may result in mild abdominal discomfort.
Eyes:
Irritating to the eyes causing watering and redness.
Skin:
May cause mild irritation, and drying to the skin due to its physical characteristics.
Inhaled:
Dust is mildly irritating to the nose, throat and respiratory tract and may cause coughing and
sneezing. Pre-existing upper respiratory and lung diseases including asthma and bronchitis
may be aggravated.
Health Effects: Chronic (long term)
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
MSDS for Alumina
Page 5 of 6
Eyes:
Dust may cause irritation and inflammation of the eyes and aggravate pre-existing eye
conditions.
Skin:
Repeated heavy contact with the dust may cause drying of the skin and can result in skin rash
(dermatitis) typically affecting the hands. Over time this may become chronic and can also
become infected.
Inhaled:
Repeated exposure to high levels of dust (above NES) may result in increased nasal and
respiratory secretions and coughing. Inflammation of lining tissue of the respiratory system may
follow repeated exposure to high levels of dust with increased risk of lung disease.
SECTION 12: ECOLOGICAL INFORMATION
Eco-toxicity:
Product is non-toxic to aquatic and terrestrial organisms.
Persistence and
Degradability:
Product is persistent and would have a low degradability.
Mobility:
A low mobility would be expected in a landfill situation.
SECTION 13: DISPOSAL CONSIDERATIONS
Disposal methods
and containers:
Alumina can be treated as a common waste for disposal or dumped into a landfill site in
accordance with local authority guidelines. Measures should be taken to prevent dust
generation during disposal and exposure and personal precautions should be observed (see
Section 8).
SECTION 14: TRANSPORT INFORMATION
Proper Shipping
Name:
None allocated
UN number:
None allocated
DG Class:
None allocated
Subsidiary Risk 1:
None allocated
Packaging Group:
None allocated
HAZCHEM code:
None allocated
Marine Pollutant:
No
Special Precautions
for User:
None
SECTION 15: REGULATORY INFORMATION
Poisons Schedule:
Not scheduled
SECTION 16: OTHER INFORMATION
For further information on this product, please contact:
Gove Aluminium Finance Limited (ABN 45 001 860 073 ), Triniti 3, 39 Delhi Road, North Ryde, NSW 2113, Australia.
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
MSDS for Alumina
Page 6 of 6
Phone:
+61 2 9235 8144 or 1800 807 668 (available in Australia only)
Fax:
+61 2 9235 8166
ADDITIONAL INFORMATION
Australian Standards References:
AS/NZS 1336
Recommended Practices for Occupational Eye Protection
AS/NZS 1715
Selection, Use and Maintenance of Respiratory Protective Devices
AS/NZS 1716
Respiratory Protective Devices
AS 2161
Industrial Safety Gloves and Mittens (excluding electrical and medical gloves)
Other References:
nd
Edition, April
NOHSC:2011(2003)
National Code of Practice for the Preparation of Material Safety Data Sheets 2
2003, National Occupational Health and Safety Commission.
NOHSC:10005(1999)
List Of Designated Hazardous Substances, April 1999, National Occupational Health and
Safety Commission, Sydney.
NOHSC:2007(1994)
National Code of Practice for the Control of Workplace Hazardous Substances (Australian
States have similar Codes of Practice in each State).
NOHSC:2012(1994)
National Code of Practice for the Labelling of Workplace Substances, March 1994, Australian
Government Publishing Service, Canberra.
NES
National Occupational Exposure Standards for Workplace Atmospheric Contaminants (NES)
Australian Safety and Compensation Council, ASCC (formerly NOHSC) 1995 as amended.
ADG Code
Australian Dangerous Goods Code 7 Edition.
th
AUTHORISATION
Reason for Issue:
New CSR format & 5 yearly update
Authorised by:
Seppo Ranki
Date of Issue:
8/12/2011
Whilst the information contained in this document is based on data which, to the best of our knowledge, was accurate and
reliable at the time of preparation, no responsibility can be accepted by us for errors and omissions. The provision of this
information should not be construed as a recommendation to use any of our products in violation of any patent rights or in
breach of any statute or regulation. Users are advised to make their own determination as to the suitability of this information
in relation to their particular purposes and specific circumstances. Since the information contained in this document may be
applied under conditions beyond our control, no responsibility can be accepted by us for any loss or damage caused by any
person acting or refraining from action as a result of this information.
END OF MSDS
CSR MSDS Reference:
ALU-SDS-152
Date Issued:
8/12/2011
