Scribd
Upload
95 views2 pages

VTC254 Tolerancias

The document provides specifications for turbochargers, including radial clearances, torque specifications, diameters and widths for various components. It lists 16 numbered specifications over two pages for engines G3606 and G3608.

Uploaded by

Hugo Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views2 pages

VTC254 Tolerancias

The document provides specifications for turbochargers, including radial clearances, torque specifications, diameters and widths for various components. It lists 16 numbered specifications over two pages for engines G3606 and G3608.

Uploaded by

Hugo Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Service Information System

Page 1 of 2

Specifications
G3606 and G3608 Engines
Media Number -SENR4257-09

Publication Date -01/07/2008

Date Updated -28/07/2008


i00920640

Turbocharger
SMCS - 1052

View Image

Illustration 1

g0047

(1) Radial clearance for turbine shaft bearings ... 0.440 to 0.600 mm (.0173 to .0236 inch)
(2) Torque for impeller retaining bolt ... 48 12 Nm (35 9 lb ft)

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/medias...

19/04/2009

Service Information System

Page 2 of 2

(3) Tighten the bolts to the following torque. ... 58 12 Nm (43 9 lb ft)
(4) Tighten the bolts to the following torque. ... 28 7 Nm (21 5 lb ft)
(5) Minimum outside diameter of turbine shaft (impeller end) ... 33.480 mm (1.3181 inch)
Maximum inside diameter of turbine shaft bearing (impeller end) ... 33.54 mm (1.320 inch)
(6) Tighten the bolts to the following torque. ... 17 3 Nm (13 2 lb ft)
(7) Tighten the bolts to the following torque. ... 28 7 Nm (21 5 lb ft)
(8) Tighten the bolts to the following torque. ... 58 12 Nm (43 9 lb ft)
(9) End play for the turbine shaft ... 0.10 to 0.20 mm (.004 to .008 inch)
(10) Maximum width of seal ring groove ... 2.85 mm (.112 inch)
(11) Minimum diameter of the impeller hub ... 46.00 mm (1.811 inch)
(12) Tighten the bolts to the following torque. ... 17 3 Nm (13 2 lb ft)
(13) Tighten the bolts to the following torque. ... 58 12 Nm (43 9 lb ft)
(14) Tighten the mounting bolts for the turbocharger to the following torque. ... 86 5 Nm (64 4 lb ft)
(15) Minimum outside diameter of turbine shaft (turbine end) ... 42.980 mm (1.6921 inch)
Maximum inside diameter of turbine shaft bearing (turbine end) ... 43.06 mm (1.695 inch)
(16) Maximum width of seal ring groove in turbine shaft ... 2.58 mm (.102 inch)

Copyright 1993 - 2009 Caterpillar Inc.


All Rights Reserved.
Private Network For SIS Licensees.

Sun Apr 19 18:35:42 EST 2009

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/medias...

19/04/2009

You might also like