A.E.G.

TR4 TR15 TR16

/

MANUAL

Automatic
Electric
Gun

A.E.G.
TR4 TR15 TR16

TAIWAN
ChangHua Tel : +886-4-798-9000 Fax : +886-4-798-9900
No.999, Zhonghua Rd. Shengang Township,
Changhua County 50952, Taiwan (R.O.C.)

(Head Quarter)

Taipei Tel : +886-2-2692-2000 Fax : +886-2-2692-4000

11F-3., No.27, Lane 169, Kangning St. Shijr City,
Taipei County 22180, Taiwan (R.O.C.)
Sales Dept. [email protected], [email protected]
Technology Dept. [email protected]
PR Dept. [email protected]

U.S.A.
Los Angeles Tel : +1-626-581-0101
Fax : +1-626-581-1011
1122 Coiner Court City of Industry,
CA91748 (U.S.A.)
[email protected]

G2-201211-02-

MANUAL

Automatic
Electric
Gun

A.E.G. Manual

Warning
All products employ a high precision 6.04mm barrel. Using
5.95mm BB pellets is highly recommended. Damage to the
product due to by faulty BB pellets voids the warranty. Use with
caution.
The buyer and the user of this product shall adhere to all local
laws regulating the usage and the ownership of airsoft guns.

You may be liable for damaging

public, personal property, or for
injuring a person or an animal.
Always observe good manners
and enjoy fun sport shooting.

Safety procedures:
1. Attach the safety cap to the
muzzle.
2. Set the selector lever to the
safety position.
3. Remove the magazine.

When shooting the air guns for

target practice or in a game
situation, you and all participants
must wear safety goggles or
other eye protective gear.
Please pay attention to ricochets
and third parties around you.

Warning

TR4 / TR15 / TR16

This product is intended for users 18 years or older.
Read all instructions before using this product.
Adult supervision required.
Always wear safety goggles when using this product.
Misuse or careless handling of this product may cause injury.
May be hazardous up to 50 meters.

Orange tip disclaimer

All G&G Airsoft guns come with a permanent fixed orange tip
required by law, which will grant Airsoft legal usage in the United
States.
If you alter, modify, abuse or remove the orange tip, all warranty
coverage will be void.

Warning
For more product information
please visit our website
www.guay2.com

When you carry the air gun,

attach the safety cap, set the
selector lever to the safety
position, and always put the air
gun in a case or bag.

Never direct the muzzle

towards a person, animal, or in
any direction that may cause
harm or damage to a third
party.

Make sure to put the barrel

and safety cap onto the
muzzle except when shooting,
to prevent any accidents,
discharge of BB's, and also
for dust protection purposes.
Never pull the trigger while
the barrel and safety cap are
attached.

Select a safe place for

operating the air gun and
avoid places where people
and cars are around.

Looking into the muzzle is

extremely dangerous,
regardless of having BB's
loaded or not. If you get hit
in the eye by a BB pellet,
worst case scenario, you
may lose your eye sight.

Activating the trigger

carelessly is extremely
dangerous. Never put
your finger on the trigger
unless the safety cap is
removed and you are
ready to shoot a target.

Always attach the safety cap

to the muzzle, remove the
battery and store the air gun
in a case or bag and at a
place that is out of reach of
children.

There may be cases where

some BBs remain in the gun
after the magazine has been
removed. After removal of the
magazine, direct the muzzle
towards a safe direction and
pull the trigger to confirm that
there are no BB's remaining in
the gun, then attach the safety
cap.

Disassembling or modifying the

gun may adversely affect the
performance and make it
dangerous. It would also void all
warranty.

A.E.G. Manual

Contents
Contents

TR4 Series List

TR4 / TR15 / TR16

TR4 Series list

TR4 Series List

01 Warning

For more product information please visit our website

www.guay2.com

[ TR4-18 Light ]

03 Contents
04 TR4 Series List
05 TR15 Series List
06 TR16 Series List
11 Blow Back Pneumatic System

[ TR4 CQB-H ]

[ TR4 CQB-H DST ]

[ TR4 CQB-R ]

[ TR4 CQB-R DST ]

[ TR4 CQB-S ]

[ TR4 CQB-S DST ]

13 TR16 Series Components

18 TR15 Series Components
19 TR4 Series Components

[ TR4-18 Light DST ]

21 Selector & Safety

22 Installing the Battery
25 Sight Adjustment
26 Charging Handle & Hop-up Adjustment
27 Movable Parts
31 Magazine Setting

[ TR4-18 ]

32 Firing
33 Maintenance
34 Troubleshooting & Disclaimer
35 Parts List - Common
36 Parts List - Gear Box
37 Parts List - Mock Suppressor & Barrel
38 Parts List - Upper Receiver & Sight
39 Parts List - Handguard & Rail
41 Parts List - Stock
42 Parts List - Grip & Others

[ TR4-18 DST ]

A.E.G. Manual

TR15 Series List

TR4 / TR15 / TR16

TR15 Series list

TR16 Series list

For more product information please visit our website

www.guay2.com

TR16 Series List

For more product information please visit our website

www.guay2.com

[ TR15 Raider ]

[ TR15 Raider DST ]

[ TR16 Carbine Light ]

[ TR16 Carbine Light DST ]

[ TR15 Raider-L ]

[ TR15 Raider-L DST ]

[ TR16 Ranger ]

[ TR16 Ranger DST ]

[ TR15 Raider-XL ]

[ TR15 Raider-XL DST ]

[ TR16 Carbine ]

[ TR16 Carbine DST ]

A.E.G. Manual

TR16 Series List

TR16 Series list

TR16 Series list

For more product information please visit our website

www.guay2.com

[ TR16 CRW ]

TR16 Series List

TR4 / TR15 / TR16

For more product information please visit our website
www.guay2.com

[ TR16 A2 DST ]

[ TR16 CRW Cannon DST ]

[ TR16 CQW ]

[ TR16 CRW DST ]

[ TR16 CRW Viper ]

[ TR16 CRW Cannon ]

[ TR16 CRW Viper DST ]

[ TR16 A2 ]
[ TR16 CQW DST ]

[ TR16 A2 Carbine ]

[ TR16 A2 Carbine DST ]

A.E.G. Manual

TR16 Series List

TR16 Series list

TR16 Series list

For more product information please visit our website

www.guay2.com

[ TR16 R4 Carbine ]

TR16 Series List

TR4 / TR15 / TR16

For more product information please visit our website
www.guay2.com

[ TR16 R4 DST ]

[ TR16 R4 ]
[ TR16 R4 Carbine DST ]

[ TR16 A3 Carbine ]

[ TR16 R5 DST ]

[ TR16 R5 ]
[ TR16 A3 Carbine DST ]

[ TR16 A3 DST ]
[ TR16 R4 Commando ]
9

[ TR16 R4 Commando DST ]

[ TR16 A3 ]
10

A.E.G. Manual

Blow Back System

TR4 / TR15 / TR16

Patents

Blow Back Pneumatic System

True to the faith of mimicking real life firearms, G&G is proud to present its new Pneumatic Blow Back system to its
line of airsoft guns. Conventional airsoft blow back utilizes tow hook springs to mimic real life bolt actions, which often
lead to excess wear, tear, and poor reliability in the gear box. To alleviate the problem of conventional systems,
G&G has independently developed the Pneumatic Blow Back system; a piston driven and gas operated
mechanism to better mimic real life bolt actions.

G&G awarded New blow back pneumatic system patents all over the world

This new technology utilizes compressed air to move the bolt, which enables the action without adding extra
stress to the gear box.
This class leading system represents a significant milestone in the airsoft industry.

For more product information please visit our website

www.guay2.com

11

12

A.E.G. Manual

TR16 Series Components

TR4 / TR15 / TR16

TR16 Series Components

TR16 Series Components

TR16 Series Components

Handguard (Short)

For more product information

please visit our website
www.guay2.com

For more product information

please visit our website
www.guay2.com

TR16 Carbine Light / TR16 Ranger

Tactical Sling Attachment

TR16 Carbine / A2 Carbine / R4 Carbine

Handguard (Short)

TR16 Carbine / A2 Carbine / A3 Carbine

6-Position Retractable Stock

Outer Barrel

TR16 Carbine / A2 Carbine / R4 Carbine

TR16 Carbine / R4 / R4 Carbine

Tactical Sling Attachment

Outer Barrel

Detachable Carrying Handle

TR16 Carbine Light

Outer Barrel

TR16 A2 / A3 / R5 / A2 Carbine / A3 Carbine

Handguard (Long)
TR16 A2 / A3

Receiver Set

TR16 Carbine / A2 Carbine / R4 Carbine

TR16 Carbine Light / TR16 Ranger / A3 / A3 Carbine

6-Position Retractable Stock

Outer Barrel

TR16 A2 / A2 Carbine

TR16 Carbine / A2 Carbine / R4 Carbine

TR16 Ranger

Fixed Stock

TR16 A2 / A3 /A3 Carbine / R4 / R5

Delta Ring

Flash Suppressor

Flash Suppressor
450 Rounds Magazine

Selector Lever

Selector lever
Grip
Trigger guard

13

Delta Ring

450 Rounds Magazine

Grip
Trigger Guard
14

A.E.G. Manual

TR16 Series Components

Front sight for TR16 C.Q.W.

Rail system (short)

TR16 CQW / CRW / Cannon / Viper

TR16 CQW

TR4 / TR15 / TR16

TR16 Series Components
For more product information please visit our website
www.guay2.com

Detachable rear sight

Front sight for T418

TR16 CRW Cannon

TR16 Series Components

Rear sight for T418

TR16 Series Components

For more product information
please visit our website
www.guay2.com

Extend battery stock

for TR16
Selector lever
Trigger
Flash suppressor for SCAR-Type II
Reinforced grip for LR300

Patriot battery stock

for TR16

PBS mock suppressor for AK

Selector lever
Rail system (short)

TR16 CQW / CRW / Cannon / Viper

Trigger guard
Q.D. Sling swivel

Tactical grip
for TR16

450 rounds magazine

450 rounds magazine

TR16 CRW
Front sight for T418

Front kit for TR16 CRW Viper

Ready Magazine

TR16 R4 carbine / CRW

15

Trigger

Tactical grip for TR16 series

Handguard panels

Trigger guard

TR16 CRW Viper

16

A.E.G. Manual

TR16 Series Components

TR4 / TR15 / TR16

TR16 Series Components

TR15 Series Components

TR15 Series Components

For more product information please visit our website

www.guay2.com

Rail system (short)

Front sight

Outer Barrel

TR16 R4 / R4 carbine

TR15 Raider-L / XL

For more product information please visit our website

www.guay2.com

Ready-MAG

TR16 R4 carbine / CRW

Rail system (long)

TR15 Raider-XL

Rail system (long)

TR16 R5

Detachable rear sight

Detachable rear sight

Front sight

TR16 R4 / R4 carbine / R5

Handguard panels

TR16 R4 / R4 carbine / R5

Extend battery stock

Front sling swivel

TR16 R4 / R4 carbine / R5

Selector lever
Rail system (short)
TR15 Raider / Raider-L

Magazine catch button

Rear sling swivel

Trigger

TR15 Raider-XL

Front sling swivel

Forward grip

17

Mock flash suppressor

Grip

Grip

TR15 Raider / Raider-L

450 rounds magazine

Trigger guard

18

A.E.G. Manual

TR4 Series Components

TR4 / TR15 / TR16

Handguard

TR4 CQB H

TR4 Series Components

LR300 Type flash suppressor

Sopmod tactical stock

Stock release lever

Front sight

TR4-18 Series

Front grip

Extend battery stock for TR16

Outer barrel

TR4 CQB R
19

Grip

450 rounds magazine

Trigger guard

Rear Sight

TR4-18

TR4-18 Series

Rail System

For more product information

please visit our website
www.guay2.com

Grip

TR4-18 Series

Rail mount system (SD type)

Selector lever

TR4 Series Components

Folding Front sight

Detachable rear sight

Assault type
flash suppressor

TR4 Series Components

TR4-18 Series

Handguard panel

Rear sling swivel

Mock sound suppressor

Front grip
Q.D. Sling swivel mount

Stock release lever

Trigger

TR4 CQB S
20

A.E.G. Manual

Selector & Safety

TR4 / TR15 / TR16

Installing the Battery

Warning

Selector & Safety

Installing the Battery

Use only the G&G battery purchased from your local dealer.

For Fixed Stock Version

Warning
Never operate the selector switch while pulling the trigger.
Otherwise, malfunctions may occur.
Pulling the trigger with the Selector being set at safe mode may damage the air gun.

TR16 A2 / A3 / A3 Carbine / R4 / R5

Click

Always set the safety mode setting immediately after firing.

Lower the stock plate nail and open the cover.

Connect the connector until you hear a 'click',

then insert the battery into the fixed stock.

For Handguard Version

Safety Setting Mode

Semi Mode

The trigger cannot be pulled

Single shot

When the gun is in storage or not being

fired, always set the selector to the Safe
position and attach the protective cap on
the muzzle.

21

The gun will fire one shot each time

when pulling the trigger.

Close the battery cover.

TR16 Carbine / A2 Carbine

TR4 CQB H

Fully Automatic Mode

Automatic firing
The gun will fire continuously while the
trigger remains pulled.

Click
Pull the delta ring and hold.
Remove the lower handguard.

Set the battery beside the outer barrel.

Connect the battery plug with the connector
until you hear a 'click'.

Hold the battery and pull the delta ring.

Remove the lower handguard.

22

A.E.G. Manual

Installing the Battery

Warning

Installing the Battery

Use only the G&G battery purchased from your local dealer.

For Extended Battery Stock Version

TR16 CQW

Installing the Battery

TR4 / TR15 / TR16

TR15 Series

TR4 CQB R / TR4 CQB S

Warning

Installing the Battery

Use only the G&G battery purchased from your local dealer.

For Ready Magazine Version

TR16 R4 Carbine / CRW

Click

Click
1

1. Push the stock release lever.

2. Pull the stock to the last position.

1. Pull and hold the stock release lever mount.

2. Pull out the stock.

For Extended Battery Stock Version

TR16 CQW

Turn and take off the battery cover.

TR15 Series

TR4 CQB R / TR4 CQB S

Pull out the connector.

Connect the battery plug with the connector

until you hear a 'click'.

For Patriot Battery Stock Version

Insert into upper receiver and connect firmly

until you hear a 'click'.

TR16 CRW Cannon / CRW Viper

Click

Insert the battery into the stock.

23

Connect the battery plug into the connector

until you hear a 'click'.

Click
Reinstall the stock.

Release the battery stock.

Connect the battery plug with the connector

until you hear a 'click'.

1. Insert the battery into the stock.

2. Lock the stock.

24

A.E.G. Manual

Sight Adjustment

TR4 / TR15 / TR16

Warning

Sight Adjustment

Make sure not to lose the adjustment tool.

Front sight adjustment

For front sight up-down adjustment.

Turning clockwise : Raises the pellet hitting point.
Turning counterclockwise : Lowers the pellet hitting point.

Precision targeting

For left-right adjustment.

Turning clockwise :
Shifts the pellet hitting point to the right.
Turning counterclockwise :
Shifts the pellet hitting point to the left.

Be careful not to catch your fingers in the dummy bolt.

Open the port cover

Windage adjustment knob

Turning the windage adjustment dial

will move the pellet hitting point to
the left or right.

Warning

LEFT

RIGHT

Charging Handle &

Hop-up Adjustment
Charging Handle & Hop-up Adjustment
Hop-up adjustment

LEFT

RIGHT

1. The Charging handle can be pulled and the bolt will be fastened.
2. Pulling the charging handle will take the bolt back and open the
port cover. This function is only for the plastic/blow back version

Up-down adjustment

Normal

Turn the hop-up for a desired flight pattern of the BB pellet.

The hop-up dial can be turned to a certain degree.
Turning it too much will damage the unit.

Warning
Too much hop-up ( Return the lever toward Normal ).

Hop

Never hold the gun sideways as the BB pellets

will curve right or left due to the hop-up system.

UP

Turning the dial UP

will raise the pellet
hitting point.
Best Direction.

DOWN

Battle sight
( For common shooting )
Used for full automatic firing.

25

Battle sight
( For special shooting )
Used for precision firing.

Turning the dial DOWN

will lower the pellet
hitting point.
Raises the pellet hitting point.

Not enough hop-up ( Move the lever toward HOP ).

or Too much hop-up ( Return the lever toward Normal ).

26

A.E.G. Manual

Movable Parts

TR4 / TR15 / TR16

Warning

Movable Parts

Only adjust if the gear noise becomes shrilly.

Depress the Trigger Guard

Motor Adjustment

Depress the trigger guard plunger with a proper tool and open the trigger guard.

The motor adjustable screw is at the bottom of the grip.

Use a screwdriver to adjust.

Forward Grip Setting

Set the forward grip on the rail.

27

Movable Parts
Movable Parts

Installing the Carrying Handle

Connect the detachable carrying handle

with the upper receiver.

Fasten the interface knob.

Finish.

Installing the Rear Sight

Move the forward grip to adjust position.

Fasten the knob.

Put on the detachable rear sight on the

upper receiver.

Fasten the interface knob.

Finish.

28

A.E.G. Manual

Movable Parts

TR4 / TR15 / TR16

Movable Parts

Q.D. Sling Swivel Setting

Put on Q.D.sling swivel mount on the rail.

Fasten the screw.

29

Movable Parts
Removing the Handguard

Install the Q.D.sling swivel on the Q.D.sling

swivel mount.

Install the Q.D. sling swivel on the sopmod

tactical stock.

Rail Handguard Panels Setting

Set the forward grip on the rail.

Movable Parts

Pull the delta ring.

Remove the lower handguard.

Remove the upper handguard.

Pull the stock.

Adjust the position of the stock.

(6 positions)

Retractable Stock

Slide in the rail handguard panels.

Finish.

Push the release lever to unlock.

30

A.E.G. Manual

Magazine Setting
Warning

Firing

TR4 / TR15 / TR16

Make sure to set the magazine upwards. It is securely installed with you hear a 'click'.
Confirm that the safety lever is set to Safety position and do not place your finger on the trigger.

Magazine Setting

Magazine Setting

Warning

Select a safe place for operating the air gun.

Never put your finger on the bolt when operating the air gun.

Firing

Firing
After Operation
1. Remove the magazine and fire at a safe direction for
2-3 seconds. Push the forward assist knob to release
the spring and have the selector set into safety mode.
Make sure that the barrel is empty.
2. Always disconnect the battery
and attach the protective cap
whenever you do not operate
the air gun.

Load G&G 5.95mm BB pellets into the

magazine.The magazine is capable of
holding approximately 450 pellets.

Open the magazine cover.

Magazine Setting

After the BB pellets have been loaded,

close the cover and turn the gear on the
bottom until the sound changes.

To Release the Magazine

Remove the protective cap only when

you are ready to fire the gun.

Click

Press

Click

Insert the magazine into the body until you hear

a 'click'.

31

Cautions On Motor & Battery

Press the magazine release.

Pull the magazine out of the receiver.

Make sure to install the magazine

upwards and into the body.
It is installed properly when you hear a
'click'.

Set the Selector Lever to Semi or

Full Auto.

1. Charge the battery if the firing cycle becomes slow.

2. Stop using the air gun for 5-10 minutes after firing
around 500 rounds in order to ensure a longer life
of the motor and battery.

32

A.E.G. Manual

Maintenance
Maintenance

Troubleshooting
& Disclaimer

TR4 / TR15 / TR16

Maintenance When Pellet Speed Becomes Low

Troubleshooting
SYMPTOM
No operation at all

1. Place a few drops of silicone oil or teflon oil into the pellet entrance. After inserting
BB pellets into the magazine, fire the gun for up to 200~300 pellets.
2. To complete the cleaning, use the cleaning rod ( with cotton ) to remove excess oil.

Warning
Do not jam the cleaning rod into the barrel by force.
Should the BBs remains inside the barrel, point the gun towards a safe direction
and discharge any loosened BBs in semi-automatic mode.

Removing Clogged Pellets

CORRECTIVE

Pellets are clogged inside the magazine.

Although motor is revolving, no

Pellets are clogged in the chamber.
pellet can be fired
Impossible full-auto
operation(automatic firing)

Shooting distance becomes

shorter
Too loud operating noise
Pellets being fallen out from
barrel end

Warning

POTENTIAL
Selector lever is set to safety.
Battery is not charged.
Battery connector is disconnected.
The and of battery connector is reversed.
Expired motor life (50,000 to 60,000 rounds) or
poor electrical connection.

If gun gets wet

Faulty gear.
Insufficient battery power.
Faulty pellet feed of magazine.
Poor electrical connection.
Damaged or worn chamber set.
Damaged or worn piston set (O-ring,piston spring)
Something is jammed in the inner barrel
Faulty BB pellets (too small or heavy)
Shortage of silicone oil
Gear problem caused by too many blank firing
Worn or damaged gear
Gear problem caused by too many blank firing
Damaged or worn chamber set.
No hop setting.
Faulty BB Pellets (too small or heavy)

Set the selector lever to Semi or Full Auto.

Charge the battery.
Connect the connector.
Switch the batteries to the correct position.
Replace the dead motor (can be purchased from local dealer or directly
from G&G). Check and repair the contacts.
Insert the charging rod into the magazine and move up and down a few
times to remove clogged pellets.
Remove clogged pellets using the cleaning rod.
Purchase the replacement gear from your dealer or G&G and repair.
Charge the battery.
Repair clogging of the magazine.
Consult your dealer or G&G for overhaul maintenance or repair.
Replace the replacement parts (purchase from your dealer or G&G)
Use the cleaning rod and clean the inner barrel.
Use the genuine G&G Pellets.
Place a few drops of silicone oil onto the upper chamber.
Consult your dealer or G&G for overhaul maintenance, part replacement
(gear,etc.) or repair.

Turn the hop adjustment lever toward Hop.

Use the G&G Pellets.
Stop operation immediately, disconnect the battery, wipe off water from inside the main body and the battery. After the gun is
completely dry, carry out trial firing. If the unit is not operational, please contact your local dealer for repair.

Make sure no dirt gets into the chamber

to avoid clogging of pellets.

Hop-up may be unstable for 200 to 300

rounds after using silicone oil. This is the

normal operation of the gun.
Never use CRC-556, WD40, or other corrosive
lubricants.
33

1. Return the hop-up dial to the Normal position and insert

the cleaning rod from the lead edge of the barrel.
2. To remove clogged BBs, carefully insert the cleaning rod
inside with the flat tip facing down as shown below.

Disclaimer
Accessories pictured are not always included with product.
Adult supervision required for users under 18 years of age.
The purchaser and user should conform to all laws
governing the ownership of airsoft guns.

All products in this manual are imitation firearms and are not intended nor represented to be
comparable in design, appearance, or function to any actural firearm offered by other
manufacturers.
Product names are trademarks of G&G, which has no affiliation to, and is not associated, or
sponsored by any manufacturer of actual or imitation firearms. Products may vary form those
pictured.

34

A.E.G. Manual

Parts List - Common

TR4 / TR15 / TR16

Common Parts

Gear Box Set

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

16
TR

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

02
61
TR
16
TR

1
-0

16
TR

4
-0

16
TR

3
-0

7
-0
16
R
T

16
TR

16
TR
0
-1
16
TR

8
-0

6
-0
16
R
T

16
TR

16
TR

5
-0

4
-1
16
R
T
6
-1
16
TR

35

Parts List - Gear Box

16
TR

15

13

16
TR

2
-1

09

1
-1
16
R
T

21

16
TR
16
TR

9
-1
16
TR
8
-1
16
R
T

20

17

TR16-01

Charging Handle

TR16-02

Port Cover Set

TR16-03

Magazine Catch Set

TR16-04

Selector Plate

TR16-05

Assist Knob Set

TR16-06

Selector Lever Set

TR16-07

Bolt Catch Set

TR16-08

Lower Receiver Set

TR16-09

Hop-Up Set

TR16-10

Hop-Up Rubber Set

TR16-11

Piston Rod

TR16-12

Front Frame Lock Pin Set

TR16-13

Trigger Guard Set

TR16-14

Rear Frame Lock Pin Set

TR16-15

Magazine

TR16-16

Motor Set

Common Parts for TR16 / TR15 / TR4

TR16-17

Gear Box Set

Non-Blowback for TR16 A2 / A2 Carbine

TR16-18

Blowback Gear Box Set

TR16-19

Charging Upper Cover

TR16-20

Charging Plate

TR16-21

Blowback Piston Set

Blowback for TR16 / TR15 / TR4

36

A.E.G. Manual

Parts List Mock Suppressor & Barrel

TR4 / TR15 / TR16

Upper Receiver & Sight

9
- 2
16
R
T

Mock Suppressor & Barrel

You may buy all of the groups
parts from G&G support Dep.
E-Mail: support@guay2com

16
TR

31
61
TR

24
61
TR

30

26
61
TR

2
- 3
16
R
T

8
- 3
16
TR
23
61
TR

7
- 2
16
R
T

3
- 3
16
R
T

16
TR

2
- 2
16
R
T
25
61
TR

16
TR

39

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

0
- 4
16
R
T

43

1
- 4
16
R
T
16
TR

34
61
TR

37
61
TR

35
61
TR
6
- 3
16
TR

42
61
TR

6
- 4
16
R
T

28
61
TR

45
61
TR
4
- 4
16
R
T

37

Parts List Upper Receiver & Sight

16
TR

47

48

TR16-22

Mock Suppressor

TR16-23

Mock Suppressor (CRW / CQW / TR4-18)

TR16-24

Mock Suppressor (TR4-18 Light)

TR16-25

Mock Suppressor (CQB-S)

TR16-26

Mock Suppressor (CQB-R/H)

TR16-27

Mock Suppressor (CRW Cannon)

TR16-28

Mock Suppressor (CRW Viper)

TR16-29

Inner Barrel (Different Lengths)

TR16-30

Outer Barrel (CRW / CQW / CRW Cannon)

TR16-31

Outer Barrel (Carbine Light / CQB-R/H / Raider)

TR16-32

Outer Barrel (Ranger)

TR16-33

Outer Barrel

TR16-34

Outer Barrel (A2 / A3 / R5)

TR16-35

Outer Barrel (A2 Carbine / A3 Carbine)

TR16-36

Outer Barrel (TR4-18 Series)

TR16-37

Outer Barrel Extender (TR4-18)

TR16-38

Front Sight

TR16-39

Front Sight (CRW / Viper / Canoon / TR4-18 Light)

TR16-40

Front Sight (CQW)

TR16-41

Front Sight (TR4-18)

TR16-42

Front Sight Mount (TR4-18 Series)

TR16-43

Detachable Carrying Handle

TR16-44

Upper Receiver (A2 / A2 Carbine)

TR16-45

Upper Receiver

TR16-46

Rear Sight (with TR16-38,39)

TR16-47

Rear Sight

TR16-48

Rear Sight (CRW Viper / Cannon)

38

A.E.G. Manual

Parts List Handguard & Rail

Parts List Handguard & Rail

TR4 / TR15 / TR16

16
TR

Handguard & Rail

You may buy all of the groups
parts from G&G support Dep.
E-Mail: support@guay2com

16
TR

49
16
TR

50

16
TR

62

52
61
TR

55

16
TR

16
TR

16
TR

53
61
TR

57

0
- 6
16
R
T

56

Handguard & Rail

You may buy all of the groups
parts from G&G support Dep.
E-Mail: support@guay2com

51
9
- 5
16
R
T
54
61
TR

39

16
TR

58

1
- 6
16
R
T

TR16-49

Handguard Front Fixed Ring

TR16-50

Handguard Front Fixed Ring

TR16-51

Handguard

TR16-52

Handguard (TR16 A2 / A3)

TR16-53

Rail System Set

TR16-54

Rail System Set (TR16 R5)

TR16-55

Rail System Set (Raider-XL)

TR16-56

Rail System Set

TR16-57

Rail System Set (TR4 CQB-S)

TR16-58

Rail System Set

TR16-59

Rail System Set

TR16-60

Rail System Rear Fixed Set

TR16-61

Delta Ring (with No. TR16-52,53)

TR16-62

Delta Ring

(TR16 A2 / A3)

(TR16 R4 / R4 Carbine /TR4 CQB-R)

(CQW / CRW / Viper / Cannon)

(TR4-18 Series)

(with No. TR16-50, 51)

40

A.E.G. Manual

Parts List Grip & Others

TR4 / TR15 / TR16

Parts List - Stock

Stock

Grip & Others

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

2
- 7
16
R
T

16
TR

16
TR

63

16
TR
64
65
1
- 6
TR
16
R
T

70

16
TR

9
- 7
16
R
T

6
- 6
16
R
T

1
- 7
16
R
T

73

74

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

6
- 7
16
R
T

5
- 7
16
R
T

16
TR

78

69
61
TR
16
TR

41

68

67
61
TR

7
- 7
16
TR

TR16-63

Sling Attachment (CRW Viper /

TR16-64

Sling Attachment

TR16-65

Stock Washer (CRW)

TR16-66

Buffer Tube Set

TR16-67

Rear Q.D. Sling Swivel Set

TR16-68

Patriot Battery Stock Set

TR16-69

Fixed Stock Set

TR16-70

Retractable Stock Set

TR16-71

Extended Battery Stock Set

TR16-72

Sopmod Tactical Stock Set

TR16-73

Grip Set (Raider / Raider-L)

TR16-74

Grip Set (CQW)

TR16-75

Grip Set (CRW / Viper / Cannon

TR16-76

Grip Set

TR16-77

Ready Magazine Set

TR16-78

Handguard Panel Set

TR16-79

Forward Grip (R4 / R4 Carbine /

Cannon / Raider / Raider-L/XL)

(with No. TR16-64, 65)

(CRW)

(CRW Viper / Cannon)

(CQB-H)

/ Raider-XL / TR4-18)

(CRW / R4 Carbine)
(R5 / CQB-S/R)

R4 Commando / R5 / CQB-S/R)

42

Detachable Rear Sight

Loading BB Pellets

Movable Parts - Stock

Rear Sight Adjustment

TR4 MOD 0
DST

1
2

Picatinny Rail x 3

Handguard
Detachable
Front Sight

Tactical Sling Attachment

6-Position Retractable Stock

Lock

TR4 MOD 0

Magazine Style
420R BB Loader

Delta Ring

Model No. G-08-100-1

[ Optional Parts ]

Flash Suppressor

1. Open the trap door on the

top of the BB loader.

Selector Lever

Components

Unlock

Mid-Cap 120R Magazine

Grip

TR4 MOD 0

INSTRUCTION
MANUAL

Click

Connect the battery with the connector until you

hear a 'click', then reinstall the lower handguard.

Extra Storage Space

3.Connect magazine style

loader with the 120R
Magazine.

1.Press down the button to fold the rear sight.

2.Loosen the hex screw before removing the
rear sight. Pull the charging handle so the rear
sight can be removed.

Front Sight Adjustment

4. Slide the retainer to

release the injection lever.
5. Press the injection lever to
load BBs into the magazine.
Continue loading until the
magazine is full.

1. Pull and hold down the delta ring.

2. Remove the lower handguard.

2. Load G&G 5.95mm BB

pellets into the Magazine
style BB Loader.

Installing the Battery

1.Pull the release lever to adjust the position

of the stock. (6 positions)
2.Pull the locking lever until it click into place
to secure the position of the stock.

Press the button then pull out.

Turn the knob counterclockwise to remove the

front sight.

A.E.G. Manual

TR4 MOD 0

TR4 / TR15 / TR16

TR4 MOD0 - 02 Lower Handguard Set

TR4 MOD0 - 03 Upper Handguard Set
TR4 MOD0 - 04 Outer Barrel Set
TR4 MOD0 - 05 Hop Up Set

3
4
0
4

M
O
D
4

O
D

M
4
R
T

1
0
0
D
O
M
4
R
T
7
2
0
O
4
R
T

2
0
0
D
O
4
R
5
3
0

7
0
D
0
O

2
D
0
O
M
4

TR4 MOD0 - 26 Gear Box Set

T
R

TR4 MOD0 - 25 GOS-V2 Stock Set

TR4 MOD0 - 28 Blow Back Pneumatic Piston Set

0
D

O
M
4
R
T
-

M
4

0
3
4
T
R

9
10

D
0

TR4 MOD0 - 24 Grip Bottom Set

TR4 MOD0 - 27 Detachable Front Sight Set

9
2

D
0
O
M
4

T
R

D
0
O
M
4

M
4
R
T
T
R

11

4
T
R
4
1
0

T
R

G2-201312-03-

D
O
M
4
R
T
1
1
0
D

12
3

M
4
D

1
3
0
D
O

M
T
R

D
0
O
O
T
R

D
0
O
M
4
T
R

2
3
D
0

2
2

4
2
0
D
O
M
4
R
T

You may buy all of the groups

parts from G&G support Dep.
E-Mail: support@guay2com

1
2

TR4 MOD0 - 21 Rear Frame Lock Pin Set

TR4 MOD0 - 23 Motor

10

M
R

TR4 MOD0 - 20 Selector Plate

8
M
R
T

3
1
0
D
O
M
4

TR4 MOD0 - 19 Trigger Guard Set

TR4 MOD0 - 22 Grip Set

1
0
D
O

TR4 MOD0 - 18 Lower Receiver Set

3
O

0
D
O
M
4
R
T

TR4 MOD0 - 17 Magazine

0
1

1
2

TR4 MOD0 - 16 Stock Tube

2
3

O
M

0
D
R

0
O
M
4
R
T

TR4 MOD0 - 15 Sling Swivel Mount

1

6
0
D

2
1
-

5
4

3
2

4
T

8
0
0

TR4 MOD0 - 14 Magazine Catch Set

TR4 MOD0 - 13 Selector Lever Set

2
3

TR4 MOD0 - 12 Bolt Catch Set

TR4 MOD0 - 11 Front Frame Lock Pin Set

TR4 MOD0 - 08 Upper Receiver Set

TR4 MOD0 - 10 Port Cover Set

R
T
2
5

TR4 MOD0 - 07 Inner Barrel

TR4 MOD0 - 09 Charging Handle Set

0
M
O
D

1
6
-

0
M
O
D

1
5
0

M
O
D

0
4

0
3
-

4
R
T

TR4 MOD0 - 06 Delta Ring

M
O
D

M
O
D

3
3

M
O
D

1
7

ADDITIONAL
INSTRUCTION
MANUAL

TR4 MOD0 - 01 Flash Suppressor

Parts List

TR4 MOD0 - 29 Charging Plate Set

4
13

5
6

14
12

11
10

TR4 MOD0 - 30 Charging Upper Cover Set

TR4 MOD0 - 31 Right Selector Cap
TR4 MOD0 - 32 Wire
TR4 MOD0 - 33 Rear Sight
TR4 MOD0 - 34 Handguard Retainer
TR4 MOD0 - 35 Imitation Gas Tube