CS-03 series current sensors
DESCRIPTION:
TYPICAL APPLICATIONS:
The SENIS CS series current sensors offer low current
sensing with high voltage isolation capability. The SENIS CS
sensor incorporates the Melexis MLX91206 high sensitivity
Hall IC and a multi-turn coil to further increase sensitivity.
Process control.
Application in laboratories and in production lines,
etc.
Due its design the CS sensor can be used in any
application that requires continuous current sensing
(no time limit).
FEATURES
Low current - four ranges (0.1A to 8A)
High voltage isolation > 4KV
Linear analog voltage output
Accuracy <2% of FS
Low current consumption
Low input resistance
Small size
Through hole mounting
CS0.1A-03: full scale 0.1A, sensitivity 20V/A
CS0.2A-03: full scale 0.2A, sensitivity 10V/A
CS2.0A-03: full scale 2A, sensitivity 1V/A
CS2.5A-03: full scale 2.5A, sensitivity 0.8V/A
CS8.0A-0.3: full scale 8A, sensitivity 0.25V/A
Figure 1.
Photo of the CS series current sensor
SPECIFICATIONS CS sensor series:
The CS series current sensor contains a integrated circuit, multi turn coil and some other especially designed parts.
Thanks to its unique design the CS series current sensors is capable to measure both a unidirectional and the bidirectional
current. As an option it is possible to have the CS current sensor witch can measure only a unidirectional current, in this case
sensitivity and an input resistance of the CS current sensor are doubled (this option is available only on the customer request).
The rugged mechanical design and its small burden resistance make it useful in almost any application.
The CS series current sensors utilize a single side power supply (+5VDC). The output voltage is ratio metric to power
supply. A output voltage range is 10-90 % of power supply:
The sensor is for a bidirectional and unidirectional current:
If a current trough the sensor has maximum value with positive sign a output will be 90% of the power
supply.
If a current trough the sensor has maximum value with negative sign a output will be 10% of the power
supply.
If there is no current trough the sensor a output will be 50% of the power supply.
Key features of the CS sensor series
The unique advantages of the CS current sensor series include:
Fully integrated analog ratio metric output current sensor
Linear analog voltage output
Measuring a unidirectional and bidirectional currents
Accuracy <2% of FS
High frequency bandwidth (from DC up to 5kHz)
High disturbance immunity
High voltage isolation >4KV
Rugged package
Wide working temperature range (from -40 to +80C)
SENIS AG
Grabenstrasse 25, 6340 Baar, Switzerland
Web : www.senis.ch ; Email: [email protected]
Phone: +41 (44) 508 7029; Fax: +41 (43) 205 2638
North American Distributor: GMW Associates
955 Industrial Road, San Carlos, CA 94070, USA
Web: www.gmw.com ; Email:
[email protected]Phone: +1 (650) 802 8292; Fax: +1 (650) 802 8298
Rev.05,
Jan. 2015
Page 1/2
CS-03 series current sensors
Mechanical dimensions and schematics
Figure 2.
The CS series sensor outline drawing (mechanical dimensions) and pin out description.
ELECTRICAL SPECIFICATIONS:
Unless otherwise noted, the given specifications apply at room temperature (23C) and power supply of 5VDC.
Vdd Normal Supply Voltage [V]
Idd Supply Current [mA]
Vout - Analog Output Voltage Range [V]
Iout - Output Current [mA]
Vq - Quiescent voltage [V]
S sensitivity [V/A]
**
CS0.1A-03
CS0.2A-03
CS2.0A-03
CS2.5A-03
CS8A-03
0.5-4.5
0.5-4.5
0.5-4.5
0.5-4.5
0.5-4.5
2.5
2.5
2.5
2.5
2.5
0.25
20
10
0.8
Ipri - input circuit current [A]
0.1
0.2
2.5
Rin - input resistance []
3.54
0.85
0.021
0.01
0.009
S/T - sensitivity temperature drift [ppm/C]
200
200
200
200
200
-40+80
-40+80
-40+80
-40+80
-40+80
0.5 %
0.5 %
0.5 %
0.5 %
0.5 %
T - operating temperature [C]
NL - Nonlinearity [%]
Accuracy [% of FS]
<2
Voff - offset (@ I = 0A) [V]
0.004
Viso - dielectric isolation [kV]
Output noise
Noise Spectral Density @ f > 10 Hz (NSDW)
[V/
Hz
25.9
***
23.8
20.5
20.5
24.8
Typical frequency response
****
BW - Frequency Bandwidth [kHz]
5 kHz
Standards
EN61000-4-2, EN61000-4-3, EN61000-4-8
EN61000-6-2:2008, EN55022:2011
EN50178 clause 9.4.1, 9.4.2, 9.4.3, 9.4.4 and 9.4.5
note *
The CS0.1A-03 is programmed as bidirectional current sensor, current thru the sensor is I=0A.
note ** The CS0.1A-03 is programmed as bidirectional current sensor
note *** Region of white noise
note **** The frequency bandwidth is determined by the shape of the sinusoidal output signal, not by sensitivity.
SENIS AG
Grabenstrasse 25, 6340 Baar, Switzerland
Web : www.senis.ch ; Email: [email protected]
Phone: +41 (44) 508 7029; Fax: +41 (43) 205 2638
North American Distributor: GMW Associates
955 Industrial Road, San Carlos, CA 94070, USA
Web: www.gmw.com ; Email:
[email protected]Phone: +1 (650) 802 8292; Fax: +1 (650) 802 8298
Rev.05,
Jan. 2015
Page 2/2
