Intelligent Wireless Network Group

Department of Computer Engineering

Faculty of Engineering, Kasetsart University
http://iwing.cpe.ku.ac.th

ns-3 Tutorial (Part I)

Introduction

JCSSE 2011's tutorials and workshops

Wednesday, 11 May 2011, 9:00 - 16:00

Instructors
Intelligent Wireless Network Group (IWING)

Department of Computer Engineering

Kasetsart University
http://iwing.cpe.ku.ac.th

..
Assoc.Prof. Anan Phonphoem, Ph.D.
..
Asst.Prof. Chaiporn Jaikaeo, Ph.D.
.
Aphirak Jansang, M.Eng. (Pursuing Ph.D.)
2

Time Table
09:00 - 10:15 ns-3 Introduction & Installation
10:15 - 10.30 Break
10:30 - 12:00 Hands-On:
Point-to-point and CSMA (Ethernet)
12:00 - 13:00 Lunch
13:00 - 14:15 Hands-On:
Wireless & Tracing System and Visualizing Results
14:15 - 14:30 Break
14:30 - 15:30 Demonstation:
ns-3 protocol stack modification
15:30 - 16:00 Q&A

Credits
Modified from ns-3 Tutorial (20 August 2010)
Tutorial examples from www.nsnam.org
Slides from

Gustavo J. A. M. Carneiro (Universidade do Porto)

George Riley (Georgia Institute of Technology)
Joe Kopena (Drexel University)
Other contributors .

Examples of Available Simulation Tools

ns-2

Original design by Steve McCanne

TCP/C++ Hybrid
Open Source (Numerous contributions)
De-facto Standard in Academic Research

OPNET

Commercial, closed source tool

De-facto standard in Military and DoD programs
Full-Featured, nice GUI
Sophisticated Data Analysis features

Examples of Available Simulation Tools

Qualnet

Commercial, closed source

Competes primarily with OPNET

Strengths are in wireless models and protocols

Scalability

Based on public-domain GloMoSim tools

OMNet++

C++ engine
Very popular in European Community

ns-2: Ancestor of ns-3

Over 50% of ACM and IEEE network simulation papers
from 2000-2004 cite the use of ns-2
Went unmaintained for a long period of time
Outdated code design
Tracing system is difficult to use (mostly printf)
Need to parse trace files to extract results

ns-3 Overview
Network Simulator version 3
Rewritten from scratch
An open source discrete event simulator

Events model packet transmission, receipt, timers, etc.

Future events maintained in sorted Event List
Processing events results in zero or more new events

Target for networking research and education

NS-3 Overview
Project started around mid 2006

Still under heavy development

Partially funded by US NSF Community Resource

Initiative (CRI) grant
Official funded partners:

University of Washington

INRIA, Sophia Antipolis

(Mathieu Lacage)

Georgia Tech University (Atlanta)

(Tom Henderson, Craig Dowell)

George Riley (main author of GTNetS)

Raj Bhattacharjea

ns-3 Basic

Written completely in C++

Simulation programs are C++ executables

Python bindings for public APIs provided
NS-3 uses the waf build system

Heavy use of Templates

C++ Namespace (ns3)

Instead of ./configure; make use

./waf

Builds a dynamic library

10

Both a debug and optimized version

ns-3 Key Features

Flexible Event Scheduler

Trace output in ascii, or Pcap format

Use existing Pcap tools (eg. Wireshark)

Numerous trace points enabled via callbacks

Emulation mode

Any member function on any object can be an event handler, with

arbitrary parameter lists

Integration with real networks/packets

Real-Time Scheduler

Doxygen documentation
Mercurial Code Repository
Formal review/check-in procedure
Quarterly releases

11

ns-3 Key Designs

Use of smart pointers to ease memory management

burden on code developers
Use of object aggregation, to allow extension of object
functionality without adding additional virtual functions
to base class.

Similar to Microsoft Component Object Model

Integrated tracing framework based on type-safe

callbacks
Simulation event scheduling on arbitrary functions with
arbitrary argument lists
Packet objects manage sequential array of bytes with
helper functions to add/remove headers and data
12

Components

Node
Net Device
Channel
Application
Protocol Stack

13

The Basic ns-3 Data Flow Model

Application
Application

Application
Application

Sockets-like
API
Protocol
stack

Protocol
stack

Packet(s)

Node
NetDevice
NetDevice

Node
Channel

Channel

14

NetDevice
NetDevice

Architecture Elements

Nodes may/may not have mobility, other traits

Nodes have network devices

Network devices transfer packets over channels

Incorporating Layer 1 (Physical) & Layer 2 (Link)

Devices interface w/ Layer 3 (Network: IP, ARP)

Layer 3 supports Layer 4 (Transport: UDP, TCP)
Layer 4 is used by Layer 5 (Application) objects

15

Node Structure

A computer/ access point

Installed NICs, protocol stacks, applications
Applications: CBR, Echo Server,

Protocol Stacks: IPv4

Network Interface Cards (NIC):

16

Net Devices and Channels

Net Devices are strongly

bound to Channels of a
matching type
Net Devices example:

Ethernet NIC
WifiNetDevice

Channel example:

WifiChannel

WifiNetDevice

CsmaChannel

CSMA Channel
WifiChannel
CsmaNetDevice

17

Link Layer Model

Point-to-point (PPP links)

Csma (Ethernet links)
Bridge: 802.1D Learning Bridge
Wifi (802.11 links)

EDCA QoS support (but not HCCA)

Both infrastructure (with beacons), and adhoc modes

Mesh

802.11s (but no legacy 802.11 stations supported yet)

Flame: Forwarding LAyer for MEshing protocol

Wimax: 802.16 (new in NS 3.8)

Easy Wireless: broadband ad-hoc networking for emergency services

supports the four scheduling services defined by the 802.16-2004

standard

Tap-bridge, emu: testbed integration

18

Routing

Adhoc:
OLSR (RFC 3626)

AODV (RFC 3561)

Global routing (aka GOD routing)
Just computes static routes on simulation start
Nix-vector Routing
Limited but high performance static routing
For simulations with thousands of wired nodes
List-routing
Joins multiple routing protocols in the same node
For example: static routing tables + OLSR + AODV

Since NS 3.8 with full HNA support (thanks Latih Suresh)

19

Applications (traffic generators)

Onoff
Generates streams, alternating on-and-off periods
Highly parameterized

Can be configured to generate many types of traffic

E.g.

OnTime=1 and OffTime=0 means CBR

Works with either UDP or TCP

Packet sink: receives packets or TCP connnections

Ping6, v4ping: send ICMP ECHO request
Udp-client/server: sends UDP packet w/ sequence number
Udp-echo: sends UDP packet, no sequence number
Radvd: router advertisement (for IPv6)
20

ns-3 Packet

each network packet contains a byte buffer, a list of tags,

and metadata

buffer: bit-by-bit (serialized) representation of headers and

trailers
tags: set of arbitrary, user-provided data structures (e.g., perpacket cross-layer messages, or flow identifiers)
metadata: describes types of headers and trailers that have
been serialized

optional-- disabled by default

Enables packets to print themselves

Implemented with Smart Pointers and Copy-on-Write

Semantics
21

ns-3 Smart Pointers

ns-3 uses reference-counting smart pointers at its APIs to

limit memory leaks

Or pass by value or pass by reference to const where

appropriate

A smart pointer behaves like a normal pointer (syntax)

but does not lose memory when reference count goes to
zero
Use them like built-in pointers:
Ptr<MyClass> p = CreateObject<MyClass> ();

p->method ();

22

ns-3 Validation

Can you trust ns-3 simulations?

Can you trust any simulation?

Onus is on the researcher to verify results

ns-3 strategies:

23

Open source benefits

Validation of models on testbeds
Reuse of code
Unit tests
Event driven validation tests

Frameworks for ns-3

What do we mean by frameworks?

Extensions to ns-3 outside of the core and models

Helping users with their workflow

Scenario
Generation

Visualization
Animation

Educational
script library

Execution manager
Problem
Definition

Modeling

Experiment
Definition

Framework to
manage hybrid
ns-3/testbed/VM
experiments

24

Output data
management

ns-3
execution

Optional: Connections to
NICs or to virtual machines (VMs)

Iterate as needed

Resources

Web site:
http://www.nsnam.org

Mailing list:
http://mailman.isi.edu/mailman/listinfo/ns-developers

IRC: #ns-3 at freenode.net

Tutorial:
http://www.nsnam.org/docs/tutorial/tutorial.html

Code server:
http://code.nsnam.org

Wiki:
http://www.nsnam.org/wiki/index.php/Main_Page
25

Documentation

In the examples/ and samples/ subdirectories of the

source download package
In the doxygen pages: http://nsnam.org/doxygen/
On the project website: http://nsnam.org/
A longer, more comprehensive tutorial is online at:

26

http://www.nsnam.org/tutorials/simutools08/