LIME AND DOLOMITE
FOR THE STEEL INDUSTRY
Lime and steel in the same process
MA Mineral is one of the largest producers of
lime products in the Nordic countries.
We have extensive experience of lime and
han-dling lime. Applying lime, a product of nature,
is the most natural method of resetting the balance
in nature.
The path lime travels to its different areas of use
can be viewed as an eternal ecological process,
where very little of the raw material is wasted.
And the areas of use are many: from gardens,
forestry, agriculture, and lakes to power plants, flue
gas cleaning, water purification, pulp industry, and
the steel industry.
Lime is found in all geological formations, all over
the world. It plays a versatile and practical role.
SMA Mineral masters the many possibilities for
using lime, as well as the technology, processes,
and areas of use in which it plays a crucial role.
We have extensive experience of the industry.
Our headquarters is located in Persberg, Vrmlands
largest mining region with a tradition stretching
hundreds of years back in time.
SMA Mineral specializes in lime and dolomite
products for the steel industry. Modern steel
production requires superior quality flux for the
best yield and safety in the process.
Our lime plants in Boda, Rttvik, Oxelsund, Mo i
Rana, and Rytt produce burnt lime of high quality
for various processes in steel production.
The plants in Rttvik and Mo i Rana also burn
high quality dolomite. Lime is a natural and important element in nature. We understand its life cycle
and its areas of use whether dealing with limestone, burnt lime, slaked lime or dolomite.
Economical flux
teel production requires vast quantities of
lime to form slag in order to prevent the
steel from being oxidized. The melted slag
also removes the impurities from the steel that are
harmful to the process and products.
Dolomite is also needed to protect the refractory
lining of the steel furnace or converter, increasing
the life span a crucial parameter from a financial
viewpoint.
SMA Mineral can supply both types of high
quality alkaline flux, for every type of steel manu-
facturer, including carbon steel producers and those
that manufacture stainless steel.
Depending on the customers handling system,
both types of flux can be delivered in many ways;
as lumps in an open truck, or as pebbles and
powder in a pressurized tank truck. The flux can
also be delivered in Big Bags.
Both types of products are also available premixed, if desired.
Lime burnt in either a shaft kiln or rotary kiln
could be used for LB furnace, converter, and ladle,
as long as it is possible to meet the customers
requirements.
For example, when manufacturing stainless steel,
most customers want lime with an extremely low
residual C content, while other customers need a
somewhat higher content.
A general requirement throughout the process chain
is that the total yield of flux should be optimal.
Life Cycle
Raw materials
Flux
Lime
Dolomite
Steel
STEEL PLANT
Slag and dust
Processing
Reuse:
e.g., road surfacing
e of Steel
Recycling
End products
(examples)
- Plate goods
- Consumer goods
- Cars
- Building materials
l ingots
Scrapping
Waste
Economy and security
MA Mineral offers a number of lime and
dolomite products aimed at the steel industry. The different requests and requirements
of our customers determine the optimal product for
delivery. Customers can always rest assured that
they are receiving a quality product for their steel
products.
Below are the different types of lime and dolomite
that we offer to the steel industry:
Burnt lime Boda, Oxelsund,
Mo i Rana, Rytt
Normal burnt, high purity reactive lime. Shaft
kiln burnt.
Burnt lime Rttvik
Normal burnt, hard burnt, and overburnt lime
for the steel industry. Extremely low C content
in the latter product. Rotary kiln burnt.
Burnt dolomite Rttvik
Burnt dolomite for the steel industry. Rotary kiln
burnt.
Burnt dolomite import
Burnt dolomite for the steel industry. Via
terminal. Rotary kiln burnt.
Burnt dolomite Mo i Rana
Burnt dolomite for the steel industry. Shaft kiln
burnt.
SMA Kaldo Rttvik
Premixed burnt lime/burnt dolomite for delivery
to the steel industry. Rotary kiln burnt.
The entire chain
he combination of large production and
storage capacity together with our own
Swedish transport organization (in other
countries we use local transport organizations)
serve as the basis for reliable deliveries to our
customers.
But it takes more than just good products and
efficient distribution. The way we handle lime and
our methods for using lime products are also vital
for meeting our customers needs and demands.
SMA Mineral has its own process and technology
department that tailors technical solutions for each
company. This means that we can design material
handling systems including silo contruction projects.
MA Minerals product portfolio includes a
number of lime products suitable for
internal neutralization of pickling acid and
rinse water. No matter which product is used, SMA
Mineral can meet customer demand for highquality products.
The most common products for this type of
application are burnt lime and slaked lime, as well
as crushed and ground limestone products.
Internal
neutralization
Crushed and ground limestone
products
pure limestone products from a sedimentary
and single-crystalline origin are produced in most
fractions, suitable for pH-adjustment of water.
Burnt lime
pure normal burnt lime with high reactivity,
with a very low proportion of inert material; the
burnt lime is produced in several fractions in
Boda, Oxelsund, Mo i Rana, and Rytt.
Slaked lime
slaked lime is used when great demand is
placed on the ability to dissolve quickly; the
slaked lime is produced in Rttvik and Rytt
and has a high level of purity.
SMA Mineral AB
Box 329, SE-682 27 FILIPSTAD, Sweden, Phone +46 (0)590-164 00, Fax +46 (0)590-164 28
www.smamineral.com
[email protected]
www.bam54.se Photo/Illustration: Bo Dahlgren/www.topimage.nu Printed in Sweden May 07. Certified according to environmental standard ISO 14001. This publication carries the Svanen environmental label, no. 341.218 Reference photos: Cover: Uddeholm Tooling, p 3,6: Scana Steel Bjrneborg, p 6: Calamo Nords
