Scribd
Upload
258 views2 pages

SIL 3 Certified Safety Transmitter

The document certifies that the One Series Safety Transmitter manufactured by United Electric Controls meets functional safety standards for use in safety instrumented systems up to SIL 3. Specifically: - It has been assessed according to IEC 61508 and found to have a systematic capability of SC3, indicating it is suitable for use in applications up to SIL 3. - It has a random capability of Type B and can achieve SIL 2 with a hardware fault tolerance of 0 and SIL 3 with a hardware fault tolerance of 1. - The exact safety integrity level it can achieve in a given application depends on a calculation of the average probability of failure on demand considering factors like proof tests and architecture.

Uploaded by

Amet koko Taro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
258 views2 pages

SIL 3 Certified Safety Transmitter

The document certifies that the One Series Safety Transmitter manufactured by United Electric Controls meets functional safety standards for use in safety instrumented systems up to SIL 3. Specifically: - It has been assessed according to IEC 61508 and found to have a systematic capability of SC3, indicating it is suitable for use in applications up to SIL 3. - It has a random capability of Type B and can achieve SIL 2 with a hardware fault tolerance of 0 and SIL 3 with a hardware fault tolerance of 1. - The exact safety integrity level it can achieve in a given application depends on a calculation of the average probability of failure on demand considering factors like proof tests and architecture.

Uploaded by

Amet koko Taro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Certificate / Certificat

Zertifikat /
UEC 1210073 C001
exida hereby confirms that the:

One Series Safety Transmitter


The manufacturer
may use the mark:

United Electric Controls


Watertown, MA - USA
Has been assessed per the relevant requirements of:

IEC 61508 : 2010 Parts 1-7


and meets requirements providing a level of integrity to:

Systematic Capability: SC 3 (SIL 3 Capable)


Random Capability: Type B Element
SIL 2 @ HFT=0; SIL 3 @ HFT = 1; Route 1H
Valid until May 1, 2017
Revision 1.0 April 14, 2014

PFDAVG and Architecture Constraints


must be verified for each application
Safety Function:
The One Series Safety Transmitter will measure pressure or
temperature within the stated safety accuracy.
Application Restrictions:
The unit must be properly designed into a Safety Instrumented
Function per the Safety Manual requirements.

Place embossed
seal here for
originals, lining it
up at the bottom

ANSI Accredited Program

Evaluating Assessor

Certifying Assessor

PRODUCT CERTIFICATION
#1004

Page 1 of 2

Certificate / Certificat / Zertifikat /


UEC 1210073 C001
Systematic Capability: SC 3 (SIL 3 Capable)
Random Capability: Type B Element
SIL 2 @ HFT=0; SIL 3 @ HFT = 1; Route 1H
PFDAVG and Architecture Constraints
must be verified for each application

One Series Safety


Transmitter

Systematic Capability :
The product has met manufacturer design process requirements of Safety
Integrity Level (SIL) 3. These are intended to achieve sufficient integrity
against systematic errors of design by the manufacturer.
A Safety Instrumented Function (SIF) designed with this product must not
be used at a SIL level higher than stated.
Random Capability:
The SIL limit imposed by the Architectural Constraints must be met for each
element. This Element meets exida criteria for Route 1H.
IEC 61508 Failure Rates in FIT*
Output Type

SD

SU

DD

DU

SFF

Pressure Current with IAW

76

3429

42

98.8%

Temperature Current with


IAW
Pressure Current no IAW

76

3442

42

98.8%

78

3400

48

98.6%

Temperature Current no IAW

76

3409

45

98.7%

Pressure Relay with IAW

1755

76

1700

80

97.8%

Temperature Relay with IAW

1755

76

1719

80

97.8%

Pressure Status with IAW

1694

106

1690

46

98.7%

Temperature Status with IAW

1696

106

1710

46

98.7%

* FIT = 1 failure / 109 hours

SIL Verification:
The Safety Integrity Level (SIL) of an entire Safety Instrumented Function (SIF)
must be verified via a calculation of PFDAVG considering redundant
architectures, proof test interval, proof test effectiveness, any automatic
diagnostics, average repair time and the specific failure rates of all products
included in the SIF. Each subsystem must be checked to assure compliance
with minimum hardware fault tolerance (HFT) requirements.
The following documents are a mandatory part of certification:
64 N Main St
Sellersville, PA 18960

Assessment Report: UEC 1210073 R002 V1R1


Safety Manual: OneST-SM-02, ver. 02

T-002, V3R3-3

Page 2 of 2

You might also like