Realizado por:
Sergio Zubieta Guzman.
NORMA MSS (Manufacturers Standardization Society of th
N
NORMA
STATUS
FECHA
2.
MSS SP-6
Current
1/1/2007
6.
11.
MSS SP-9
MSS SP-25
Current
Current
1/1/2008
1/1/2008
14.
MSS SP-42
Current
1/1/2009
18.
MSS SP-43
Current
1/1/2008
24.
MSS SP-44
Current
31.
MSS SP-45
Current
35.
MSS SP-51
Current
1/1/2010
01/01/2003 (R
2008)
1/1/2007
39.
MSS SP-53
Current
01/01/1999 (R
2007)
43.
MSS SP-54
Current
01/01/1999 (R
2007)
47.
MSS SP-55
Current
1/1/2011
51.
MSS SP-58
Current
1/1/2009
55.
58.
MSS SP-60
MSS SP-61
Current
Current
1/1/2004
1/1/2009
62.
MSS SP-65
Current
1/1/2008
68.
MSS SP-67
Current
1/1/2011
72.
MSS SP-68
Current
1/1/2011
76.
MSS SP-69
Current
1/1/2003
80.
MSS SP-70
Current
1/1/2011
84.
87.
93.
MSS SP-71
MSS SP-72
MSS SP-75
Current
Current
Current
1/1/2005
1/1/2010
1/1/2008
100.
MSS SP-78
Current
1/1/2011
104.
MSS SP-79
Current
1/1/2011
110.
MSS SP-80
Current
1/1/2008
114.
MSS SP-81A
Current
1/1/2006
120.
MSS SP-83
Current
1/1/2006
124.
MSS SP-85
Current
1/1/2011
127.
MSS SP-86
Current
1/1/2009
132.
MSS SP-87
Current
135.
145.
147.
MSS SP-88
MSS SP-91
MSS SP-92
Current
Current
Current
01/01/1991 (R
1996)
1/1/2010
1/1/2009
1/1/1999
149.
MSS SP-93
Current
1/1/2008
153.
MSS SP-94
Current
1/1/2008
157.
MSS SP-95
Current
1/1/2006
160.
MSS SP-96
Current
1/1/2011
164.
MSS SP-97
Current
1/1/2006
167.
MSS SP-98
Current
170.
MSS SP-99
Current
01/01/2001 (R
2005)
1/1/2010
174.
MSS SP-100
Current
1/1/2009
178.
MSS SP-101
Current
01/01/1989 (R
2001)
180.
MSS SP-102
Current
183.
185.
189.
192.
MSS SP-104
MSS SP-105
MSS SP-106
MSS SP-108
Current
Current
Current
Current
01/07/1989 (R
2001)
1/1/2003
1/1/2010
1/1/2003
1/1/2002
194.
MSS SP-109
Current
01/01/1997 (R
2006)
197.
MSS SP-110
Current
1/1/2010
201.
MSS SP-111
Current
01/01/2001 (R
2005)
204.
MSS SP-112
Current
1/1/2010
208.
MSS SP-113
Current
01/01/2001 (R
2007)
211.
MSS SP-114
Current
1/1/2007
214.
MSS SP-115
Current
1/1/2010
218.
MSS SP-116
Current
1/1/2011
221.
MSS SP-117
Current
1/1/2011
225.
MSS SP-118
Current
1/1/2007
228.
MSS SP-119
Current
1/1/2010
231.
MSS SP-120
Current
1/1/2006
234.
MSS SP-121
Current
1/1/2006
237.
MSS SP-122
Current
239.
MSS SP-123
Current
241.
MSS SP-124
Current
1/1/2005
01/01/1998 (R
2006)
1/1/2001
243.
MSS SP-125
Current
1/1/2010
245.
MSS SP-126
Current
1/1/2007
247.
MSS SP-127
Current
2/1/2001
248.
MSS SP-128
Current
249.
MSS SP-129
Current
251.
252.
254.
256.
MSS SP-130
MSS SP-131
MSS SP-132
MSS SP-133
Current
Current
Current
Current
1/1/2006
01/01/2003 (R
2007)
1/1/2003
1/1/2010
1/1/2010
1/1/2010
258.
MSS SP-134
Current
1/1/2010
261.
263.
MSS SP-135
MSS SP-136
Current
Current
1/1/2010
2/1/2007
264.
MSS SP-137
Current
5/1/2007
265.
MSS SP-138
Current
1/1/2009
266.
MSS SP-139
Current
1/1/2010
267.
MSS SP-140
Current
1/1/2012
268.
MSS SP-141
Current
1/1/2012
269.
MSS SP-142
Current
1/1/2012
ado por:
Sergio Zubieta Guzman.
Standardization Society of the Valve and Fittings Industry, Inc.)
DESCRIPCION DE NORMA
Standard Finishes for Contact Faces of Pipe Flanges and Connecting-End Flanges of Valves and
Fittings
Spot Facing for Bronze, Iron and Steel Flanges
Standard Marking System for Valves, Fittings, Flanges, and Unions
Corrosion Resistant Gate, Globe, Angle and Check Valves with Flanged and Butt Weld Ends
(Classes 150, 300& 600)
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant
Applications Incorporating Errata: February 25,2010
Steel Pipeline Flanges Includes Errta: May 20, 2011
Bypass and Drain Connections
Class 150LW Corrosion Resistant Flanges and Cast Flanged Fittings
Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other
Piping Components - Magnetic Particle Examination Method
Quality Standard for Steel Castings and Forgings for Valves, Flanges, and Fittings and Other
Piping Components - Radiographic Examination Method
Quality Standard for Steel Castings for Valves, Flanges, Fittings, and Other Piping Components Visual Method for Evaluation of Surface Irregularities
Pipe Hangers and Supports Materials, Design, Manufacture, Selection, Application, and
Installation SP-58-2009 incorporates contents of ANSI/MSS SP-69-2003, MSS SP-77-1995 (R
2000), MSS SP-89-2003, and SP-90-2000
Connecting Flange Joint between Tapping Sleeves and Tapping Valves
Pressure Testing of Valves
High Pressure Chemical Industry Flanges and Threaded Stubs for use with Lens Gaskets
Butterfly Valves
High Pressure Butterfly Valves with Offset Design
Pipe Hangers and Supports - Selection and Application Contents of this SP have now been
incorporated into MSS SP-58-2009; however this SP is still active and available until officially
withdrawn.
Gray Iron Gate Valves, Flanged and Threaded Ends
Gray Iron Swing Check Valves, Flanged and Threaded Ends
Ball Valves with Flanged or Butt-Welding Ends for General Service
Specification for High-Test, Wrought, Butt-Welding Fittings
Gray Iron Plug Valves, Flanged and Threaded Ends
Socket Welding Reducer Inserts
Bronze Gate, Globe, Angle, and Check Valves
Stainless Steel, Bonnetless, Flanged Knife Gate Valves
Class 3000 Steel Pipe Unions Socket Welding and Threaded
Gray Iron Globe and Angle Valves, Flanged and Threaded Ends
Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators Includes
Errata: July 6, 2011
Factory-Made Butt-Welding Fittings for Class I Nuclear Piping Applications
Diaphragm Valves
Guidelines for Manual Operation of Valves
MSS Valve User Guide
Quality Standard for Steel Castings and Forgings for Valves, Flanges, Fittings, and Other Piping
Components Liquid Penetrant Examination Method
Quality Standard for Ferritic and Martensitic Steel Castings for Valves, Flanges, Fittings, and
Other Piping Components Ultrasonic Examination Method
Swage(d) Nipples and Bull Plugs
Guidelines on Terminology for Valves and Fittings
Integrally Reinforced Forged Branch Outlet Fittings - Socket Welding, Threaded and
Buttwelding Ends
Protective Coatings for the Interior of Valves, Hydrants, and Fittings
Instrument Valves
Qualification Requirements for Elastomer Diaphragms for Nuclear Service Diaphragm Valves
Part-Turn Valve Actuator Attachment Flange and Driving Component Dimensions and
Performance Characteristics
Multi-Turn Valve Actuator Attachment Flange and Driving Component Dimensions and
Performance Characteristics
Wrought Copper Solder Joint Pressure Fittings
Instrument Valves for Code Applications
Cast Copper Alloy Flanges and Flanged Fittings Class 125, 150 and 300
Resilient-Seated Cast Iron-Eccentric Plug Valves
Welded Fabricated Copper Solder Joint Pressure Fittings
Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends Incorporating
Errata: August 23, 2010
Gray-Iron and Ductile-Iron Tapping Sleeves
Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method
Connecting Joint between Tapping Machine and Tapping Valves
Corrosion Resistant Pipe Fittings Threaded and Socket Welding Class 150 and 1000
Excess Flow Valves, 1 1/4 NPS and Smaller, for Fuel Gas Service
Service-Line Valves and Fittings for Drinking Water Systems
Bellows Seals for Globe and Gate Valves
Compact Steel Globe& Check Valves Flanged, Flangeless, Threaded,& Welding Ends
(Chemical& Petroleum Refinery Service)
Factory-Made Wrought Belled End Pipe Fittings for Socket-Welding
Flexible Graphite Packing System for Rising Stem Steel Valves - Design Requirements
Qualification Testing Methods for Stem Packing for Rising Stem Steel Valves
Plastic Industrial Ball Valves
Non-Ferrous Threaded and Solder-Joint Unions for Use with Copper Water Tube
Fabricated Tapping Sleeves
Grey Iron and Ductile Iron In-Line, Spring-Loaded, Center-Guided Check Valves
Steel In-Line Spring-Assisted Center Guided Check Valves
Bracing for Piping Systems Seismic - Wind - Dynamic Design, Selection, Application
Ductile Iron Gate Valves
Copper-Nickel Socket-Welding Fittings and Unions
Bellows Seals for Instrument Valves
Metallic Manually Operated Gas Distribution Valves
Compression Packing Systems for Instrument Valves
Excess Flow Valves for Low Pressure Fuel Gas Appliances
Valves for Cryogenic Service Including Requirements for Body/Bonnet Extensions
High Pressure Knife Gate Valves
Ductile Iron Swing Check Valves
Quality Standard for Positive Material Identification of Metal Valves, Flanges, Fittings, and
Other Piping Components
Quality Standard Practice for Oxygen Cleaning of Valves& Fittings
Copper Alloy Gate, Globe, Angle, and Check Valves for Low Pressure/Low Temperature
Plumbing Applications
Quality Standard Practice for Preparation of Valves and Fittings for Silicone-Free Service
Multi-Turn and Check Valve Modifications
Excess Flow Valves for Fuel Gas Service, NPS 1 through 12
